arch/arm/mach-pxa/em-x270.c

   1 /*
   2  * Support for CompuLab EM-X270 platform
   3  *
   4  * Copyright (C) 2007, 2008 CompuLab, Ltd.
   5  * Author: Mike Rapoport <mike@compulab.co.il>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/irq.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/delay.h>
  15
  16 #include <linux/dm9000.h>
  17 #include <linux/rtc-v3020.h>
  18 #include <linux/mtd/nand.h>
  19 #include <linux/mtd/partitions.h>
  20 #include <linux/mtd/physmap.h>
  21 #include <linux/input.h>
  22 #include <linux/gpio_keys.h>
  23 #include <linux/gpio.h>
  24 #include <linux/mfd/da903x.h>
  25 #include <linux/regulator/machine.h>
  26 #include <linux/spi/spi.h>
  27 #include <linux/spi/tdo24m.h>
  28 #include <linux/spi/libertas_spi.h>
  29 #include <linux/power_supply.h>
  30 #include <linux/apm-emulation.h>
  31 #include <linux/i2c.h>
  32 #include <linux/i2c/pca953x.h>
  33
  34 #include <media/soc_camera.h>
  35
  36 #include <asm/mach-types.h>
  37 #include <asm/mach/arch.h>
  38
  39 #include <mach/pxa27x.h>
  40 #include <mach/pxa27x-udc.h>
  41 #include <mach/audio.h>
  42 #include <mach/pxafb.h>
  43 #include <mach/ohci.h>
  44 #include <mach/mmc.h>
  45 #include <mach/pxa27x_keypad.h>
  46 #include <plat/i2c.h>
  47 #include <mach/camera.h>
  48 #include <mach/pxa2xx_spi.h>
  49
  50 #include "generic.h"
  51 #include "devices.h"
  52
  53 /* EM-X270 specific GPIOs */
  54 #define GPIO13_MMC_CD           (13)
  55 #define GPIO95_MMC_WP           (95)
  56 #define GPIO56_NAND_RB          (56)
  57 #define GPIO93_CAM_RESET        (93)
  58 #define GPIO16_USB_HUB_RESET    (16)
  59
  60 /* eXeda specific GPIOs */
  61 #define GPIO114_MMC_CD          (114)
  62 #define GPIO20_NAND_RB          (20)
  63 #define GPIO38_SD_PWEN          (38)
  64 #define GPIO37_WLAN_RST         (37)
  65 #define GPIO95_TOUCHPAD_INT     (95)
  66 #define GPIO130_CAM_RESET       (130)
  67 #define GPIO10_USB_HUB_RESET    (10)
  68
  69 /* common  GPIOs */
  70 #define GPIO11_NAND_CS          (11)
  71 #define GPIO41_ETHIRQ           (41)
  72 #define EM_X270_ETHIRQ          IRQ_GPIO(GPIO41_ETHIRQ)
  73 #define GPIO115_WLAN_PWEN       (115)
  74 #define GPIO19_WLAN_STRAP       (19)
  75 #define GPIO9_USB_VBUS_EN       (9)
  76
  77 static int mmc_cd;
  78 static int nand_rb;
  79 static int dm9000_flags;
  80 static int cam_reset;
  81 static int usb_hub_reset;
  82
  83 static unsigned long common_pin_config[] = {
  84         /* AC'97 */
  85         GPIO28_AC97_BITCLK,
  86         GPIO29_AC97_SDATA_IN_0,
  87         GPIO30_AC97_SDATA_OUT,
  88         GPIO31_AC97_SYNC,
  89         GPIO98_AC97_SYSCLK,
  90         GPIO113_AC97_nRESET,
  91
  92         /* BTUART */
  93         GPIO42_BTUART_RXD,
  94         GPIO43_BTUART_TXD,
  95         GPIO44_BTUART_CTS,
  96         GPIO45_BTUART_RTS,
  97
  98         /* STUART */
  99         GPIO46_STUART_RXD,
 100         GPIO47_STUART_TXD,
 101
 102         /* MCI controller */
 103         GPIO32_MMC_CLK,
 104         GPIO112_MMC_CMD,
 105         GPIO92_MMC_DAT_0,
 106         GPIO109_MMC_DAT_1,
 107         GPIO110_MMC_DAT_2,
 108         GPIO111_MMC_DAT_3,
 109
 110         /* LCD */
 111         GPIO58_LCD_LDD_0,
 112         GPIO59_LCD_LDD_1,
 113         GPIO60_LCD_LDD_2,
 114         GPIO61_LCD_LDD_3,
 115         GPIO62_LCD_LDD_4,
 116         GPIO63_LCD_LDD_5,
 117         GPIO64_LCD_LDD_6,
 118         GPIO65_LCD_LDD_7,
 119         GPIO66_LCD_LDD_8,
 120         GPIO67_LCD_LDD_9,
 121         GPIO68_LCD_LDD_10,
 122         GPIO69_LCD_LDD_11,
 123         GPIO70_LCD_LDD_12,
 124         GPIO71_LCD_LDD_13,
 125         GPIO72_LCD_LDD_14,
 126         GPIO73_LCD_LDD_15,
 127         GPIO74_LCD_FCLK,
 128         GPIO75_LCD_LCLK,
 129         GPIO76_LCD_PCLK,
 130         GPIO77_LCD_BIAS,
 131
 132         /* QCI */
 133         GPIO84_CIF_FV,
 134         GPIO25_CIF_LV,
 135         GPIO53_CIF_MCLK,
 136         GPIO54_CIF_PCLK,
 137         GPIO81_CIF_DD_0,
 138         GPIO55_CIF_DD_1,
 139         GPIO51_CIF_DD_2,
 140         GPIO50_CIF_DD_3,
 141         GPIO52_CIF_DD_4,
 142         GPIO48_CIF_DD_5,
 143         GPIO17_CIF_DD_6,
 144         GPIO12_CIF_DD_7,
 145
 146         /* I2C */
 147         GPIO117_I2C_SCL,
 148         GPIO118_I2C_SDA,
 149
 150         /* Keypad */
 151         GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
 152         GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
 153         GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,
 154         GPIO34_KP_MKIN_3        | WAKEUP_ON_LEVEL_HIGH,
 155         GPIO39_KP_MKIN_4        | WAKEUP_ON_LEVEL_HIGH,
 156         GPIO99_KP_MKIN_5        | WAKEUP_ON_LEVEL_HIGH,
 157         GPIO91_KP_MKIN_6        | WAKEUP_ON_LEVEL_HIGH,
 158         GPIO36_KP_MKIN_7        | WAKEUP_ON_LEVEL_HIGH,
 159         GPIO103_KP_MKOUT_0,
 160         GPIO104_KP_MKOUT_1,
 161         GPIO105_KP_MKOUT_2,
 162         GPIO106_KP_MKOUT_3,
 163         GPIO107_KP_MKOUT_4,
 164         GPIO108_KP_MKOUT_5,
 165         GPIO96_KP_MKOUT_6,
 166         GPIO22_KP_MKOUT_7,
 167
 168         /* SSP1 */
 169         GPIO26_SSP1_RXD,
 170         GPIO23_SSP1_SCLK,
 171         GPIO24_SSP1_SFRM,
 172         GPIO57_SSP1_TXD,
 173
 174         /* SSP2 */
 175         GPIO19_GPIO,    /* SSP2 clock is used as GPIO for Libertas pin-strap */
 176         GPIO14_GPIO,
 177         GPIO89_SSP2_TXD,
 178         GPIO88_SSP2_RXD,
 179
 180         /* SDRAM and local bus */
 181         GPIO15_nCS_1,
 182         GPIO78_nCS_2,
 183         GPIO79_nCS_3,
 184         GPIO80_nCS_4,
 185         GPIO49_nPWE,
 186         GPIO18_RDY,
 187
 188         /* GPIO */
 189         GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,       /* sleep/resume button */
 190
 191         /* power controls */
 192         GPIO20_GPIO     | MFP_LPM_DRIVE_LOW,    /* GPRS_PWEN */
 193         GPIO115_GPIO    | MFP_LPM_DRIVE_LOW,    /* WLAN_PWEN */
 194
 195         /* NAND controls */
 196         GPIO11_GPIO     | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
 197
 198         /* interrupts */
 199         GPIO41_GPIO,    /* DM9000 interrupt */
 200 };
 201
 202 static unsigned long em_x270_pin_config[] = {
 203         GPIO13_GPIO,                            /* MMC card detect */
 204         GPIO16_GPIO,                            /* USB hub reset */
 205         GPIO56_GPIO,                            /* NAND Ready/Busy */
 206         GPIO93_GPIO     | MFP_LPM_DRIVE_LOW,    /* Camera reset */
 207         GPIO95_GPIO,                            /* MMC Write protect */
 208 };
 209
 210 static unsigned long exeda_pin_config[] = {
 211         GPIO10_GPIO,                            /* USB hub reset */
 212         GPIO20_GPIO,                            /* NAND Ready/Busy */
 213         GPIO38_GPIO     | MFP_LPM_DRIVE_LOW,    /* SD slot power */
 214         GPIO95_GPIO,                            /* touchpad IRQ */
 215         GPIO114_GPIO,                           /* MMC card detect */
 216 };
 217
 218 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 219 static struct resource em_x270_dm9000_resource[] = {
 220         [0] = {
 221                 .start = PXA_CS2_PHYS,
 222                 .end   = PXA_CS2_PHYS + 3,
 223                 .flags = IORESOURCE_MEM,
 224         },
 225         [1] = {
 226                 .start = PXA_CS2_PHYS + 8,
 227                 .end   = PXA_CS2_PHYS + 8 + 0x3f,
 228                 .flags = IORESOURCE_MEM,
 229         },
 230         [2] = {
 231                 .start = EM_X270_ETHIRQ,
 232                 .end   = EM_X270_ETHIRQ,
 233                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 234         }
 235 };
 236
 237 static struct dm9000_plat_data em_x270_dm9000_platdata = {
 238         .flags          = DM9000_PLATF_NO_EEPROM,
 239 };
 240
 241 static struct platform_device em_x270_dm9000 = {
 242         .name           = "dm9000",
 243         .id             = 0,
 244         .num_resources  = ARRAY_SIZE(em_x270_dm9000_resource),
 245         .resource       = em_x270_dm9000_resource,
 246         .dev            = {
 247                 .platform_data = &em_x270_dm9000_platdata,
 248         }
 249 };
 250
 251 static void __init em_x270_init_dm9000(void)
 252 {
 253         em_x270_dm9000_platdata.flags |= dm9000_flags;
 254         platform_device_register(&em_x270_dm9000);
 255 }
 256 #else
 257 static inline void em_x270_init_dm9000(void) {}
 258 #endif
 259
 260 /* V3020 RTC */
 261 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 262 static struct resource em_x270_v3020_resource[] = {
 263         [0] = {
 264                 .start = PXA_CS4_PHYS,
 265                 .end   = PXA_CS4_PHYS + 3,
 266                 .flags = IORESOURCE_MEM,
 267         },
 268 };
 269
 270 static struct v3020_platform_data em_x270_v3020_platdata = {
 271         .leftshift = 0,
 272 };
 273
 274 static struct platform_device em_x270_rtc = {
 275         .name           = "v3020",
 276         .num_resources  = ARRAY_SIZE(em_x270_v3020_resource),
 277         .resource       = em_x270_v3020_resource,
 278         .id             = -1,
 279         .dev            = {
 280                 .platform_data = &em_x270_v3020_platdata,
 281         }
 282 };
 283
 284 static void __init em_x270_init_rtc(void)
 285 {
 286         platform_device_register(&em_x270_rtc);
 287 }
 288 #else
 289 static inline void em_x270_init_rtc(void) {}
 290 #endif
 291
 292 /* NAND flash */
 293 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 294 static inline void nand_cs_on(void)
 295 {
 296         gpio_set_value(GPIO11_NAND_CS, 0);
 297 }
 298
 299 static void nand_cs_off(void)
 300 {
 301         dsb();
 302
 303         gpio_set_value(GPIO11_NAND_CS, 1);
 304 }
 305
 306 /* hardware specific access to control-lines */
 307 static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
 308                                  unsigned int ctrl)
 309 {
 310         struct nand_chip *this = mtd->priv;
 311         unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
 312
 313         dsb();
 314
 315         if (ctrl & NAND_CTRL_CHANGE) {
 316                 if (ctrl & NAND_ALE)
 317                         nandaddr |=  (1 << 3);
 318                 else
 319                         nandaddr &= ~(1 << 3);
 320                 if (ctrl & NAND_CLE)
 321                         nandaddr |=  (1 << 2);
 322                 else
 323                         nandaddr &= ~(1 << 2);
 324                 if (ctrl & NAND_NCE)
 325                         nand_cs_on();
 326                 else
 327                         nand_cs_off();
 328         }
 329
 330         dsb();
 331         this->IO_ADDR_W = (void __iomem *)nandaddr;
 332         if (dat != NAND_CMD_NONE)
 333                 writel(dat, this->IO_ADDR_W);
 334
 335         dsb();
 336 }
 337
 338 /* read device ready pin */
 339 static int em_x270_nand_device_ready(struct mtd_info *mtd)
 340 {
 341         dsb();
 342
 343         return gpio_get_value(nand_rb);
 344 }
 345
 346 static struct mtd_partition em_x270_partition_info[] = {
 347         [0] = {
 348                 .name   = "em_x270-0",
 349                 .offset = 0,
 350                 .size   = SZ_4M,
 351         },
 352         [1] = {
 353                 .name   = "em_x270-1",
 354                 .offset = MTDPART_OFS_APPEND,
 355                 .size   = MTDPART_SIZ_FULL
 356         },
 357 };
 358
 359 static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
 360
 361 struct platform_nand_data em_x270_nand_platdata = {
 362         .chip = {
 363                 .nr_chips = 1,
 364                 .chip_offset = 0,
 365                 .nr_partitions = ARRAY_SIZE(em_x270_partition_info),
 366                 .partitions = em_x270_partition_info,
 367                 .chip_delay = 20,
 368                 .part_probe_types = em_x270_part_probes,
 369         },
 370         .ctrl = {
 371                 .hwcontrol = 0,
 372                 .dev_ready = em_x270_nand_device_ready,
 373                 .select_chip = 0,
 374                 .cmd_ctrl = em_x270_nand_cmd_ctl,
 375         },
 376 };
 377
 378 static struct resource em_x270_nand_resource[] = {
 379         [0] = {
 380                 .start = PXA_CS1_PHYS,
 381                 .end   = PXA_CS1_PHYS + 12,
 382                 .flags = IORESOURCE_MEM,
 383         },
 384 };
 385
 386 static struct platform_device em_x270_nand = {
 387         .name           = "gen_nand",
 388         .num_resources  = ARRAY_SIZE(em_x270_nand_resource),
 389         .resource       = em_x270_nand_resource,
 390         .id             = -1,
 391         .dev            = {
 392                 .platform_data = &em_x270_nand_platdata,
 393         }
 394 };
 395
 396 static void __init em_x270_init_nand(void)
 397 {
 398         int err;
 399
 400         err = gpio_request(GPIO11_NAND_CS, "NAND CS");
 401         if (err) {
 402                 pr_warning("EM-X270: failed to request NAND CS gpio\n");
 403                 return;
 404         }
 405
 406         gpio_direction_output(GPIO11_NAND_CS, 1);
 407
 408         err = gpio_request(nand_rb, "NAND R/B");
 409         if (err) {
 410                 pr_warning("EM-X270: failed to request NAND R/B gpio\n");
 411                 gpio_free(GPIO11_NAND_CS);
 412                 return;
 413         }
 414
 415         gpio_direction_input(nand_rb);
 416
 417         platform_device_register(&em_x270_nand);
 418 }
 419 #else
 420 static inline void em_x270_init_nand(void) {}
 421 #endif
 422
 423 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 424 static struct mtd_partition em_x270_nor_parts[] = {
 425         {
 426                 .name =         "Bootloader",
 427                 .offset =       0x00000000,
 428                 .size =         0x00050000,
 429                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
 430         }, {
 431                 .name =         "Environment",
 432                 .offset =       0x00050000,
 433                 .size =         0x00010000,
 434         }, {
 435                 .name =         "Reserved",
 436                 .offset =       0x00060000,
 437                 .size =         0x00050000,
 438                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
 439         }, {
 440                 .name =         "Splashscreen",
 441                 .offset =       0x000b0000,
 442                 .size =         0x00050000,
 443         }
 444 };
 445
 446 static struct physmap_flash_data em_x270_nor_data[] = {
 447         [0] = {
 448                 .width = 2,
 449                 .parts = em_x270_nor_parts,
 450                 .nr_parts = ARRAY_SIZE(em_x270_nor_parts),
 451         },
 452 };
 453
 454 static struct resource em_x270_nor_flash_resource = {
 455         .start  = PXA_CS0_PHYS,
 456         .end    = PXA_CS0_PHYS + SZ_1M - 1,
 457         .flags  = IORESOURCE_MEM,
 458 };
 459
 460 static struct platform_device em_x270_physmap_flash = {
 461         .name           = "physmap-flash",
 462         .id             = 0,
 463         .num_resources  = 1,
 464         .resource       = &em_x270_nor_flash_resource,
 465         .dev            = {
 466                 .platform_data  = &em_x270_nor_data,
 467         },
 468 };
 469
 470 static void __init em_x270_init_nor(void)
 471 {
 472         platform_device_register(&em_x270_physmap_flash);
 473 }
 474 #else
 475 static inline void em_x270_init_nor(void) {}
 476 #endif
 477
 478 /* PXA27x OHCI controller setup */
 479 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 480 static struct regulator *em_x270_usb_ldo;
 481
 482 static int em_x270_usb_hub_init(void)
 483 {
 484         int err;
 485
 486         em_x270_usb_ldo = regulator_get(NULL, "vcc usb");
 487         if (IS_ERR(em_x270_usb_ldo))
 488                 return PTR_ERR(em_x270_usb_ldo);
 489
 490         err = gpio_request(GPIO9_USB_VBUS_EN, "vbus en");
 491         if (err)
 492                 goto err_free_usb_ldo;
 493
 494         err = gpio_request(usb_hub_reset, "hub rst");
 495         if (err)
 496                 goto err_free_vbus_gpio;
 497
 498         /* USB Hub power-on and reset */
 499         gpio_direction_output(usb_hub_reset, 0);
 500         regulator_enable(em_x270_usb_ldo);
 501         gpio_set_value(usb_hub_reset, 1);
 502         gpio_set_value(usb_hub_reset, 0);
 503         regulator_disable(em_x270_usb_ldo);
 504         regulator_enable(em_x270_usb_ldo);
 505         gpio_set_value(usb_hub_reset, 1);
 506
 507         /* enable VBUS */
 508         gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
 509
 510         return 0;
 511
 512 err_free_vbus_gpio:
 513         gpio_free(GPIO9_USB_VBUS_EN);
 514 err_free_usb_ldo:
 515         regulator_put(em_x270_usb_ldo);
 516
 517         return err;
 518 }
 519
 520 static int em_x270_ohci_init(struct device *dev)
 521 {
 522         int err;
 523
 524         /* we don't want to entirely disable USB if the HUB init failed */
 525         err = em_x270_usb_hub_init();
 526         if (err)
 527                 pr_err("USB Hub initialization failed: %d\n", err);
 528
 529         /* enable port 2 transiever */
 530         UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 531
 532         return 0;
 533 }
 534
 535 static void em_x270_ohci_exit(struct device *dev)
 536 {
 537         gpio_free(usb_hub_reset);
 538         gpio_free(GPIO9_USB_VBUS_EN);
 539
 540         if (!IS_ERR(em_x270_usb_ldo)) {
 541                 if (regulator_is_enabled(em_x270_usb_ldo))
 542                         regulator_disable(em_x270_usb_ldo);
 543
 544                 regulator_put(em_x270_usb_ldo);
 545         }
 546 }
 547
 548 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 549         .port_mode      = PMM_PERPORT_MODE,
 550         .flags          = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 551         .init           = em_x270_ohci_init,
 552         .exit           = em_x270_ohci_exit,
 553 };
 554
 555 static void __init em_x270_init_ohci(void)
 556 {
 557         pxa_set_ohci_info(&em_x270_ohci_platform_data);
 558 }
 559 #else
 560 static inline void em_x270_init_ohci(void) {}
 561 #endif
 562
 563 /* MCI controller setup */
 564 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 565 static struct regulator *em_x270_sdio_ldo;
 566
 567 static int em_x270_mci_init(struct device *dev,
 568                             irq_handler_t em_x270_detect_int,
 569                             void *data)
 570 {
 571         int err;
 572
 573         em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
 574         if (IS_ERR(em_x270_sdio_ldo)) {
 575                 dev_err(dev, "can't request SDIO power supply: %ld\n",
 576                         PTR_ERR(em_x270_sdio_ldo));
 577                 return PTR_ERR(em_x270_sdio_ldo);
 578         }
 579
 580         err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
 581                               IRQF_DISABLED | IRQF_TRIGGER_RISING |
 582                               IRQF_TRIGGER_FALLING,
 583                               "MMC card detect", data);
 584         if (err) {
 585                 dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
 586                 goto err_irq;
 587         }
 588
 589         if (machine_is_em_x270()) {
 590                 err = gpio_request(GPIO95_MMC_WP, "MMC WP");
 591                 if (err) {
 592                         dev_err(dev, "can't request MMC write protect: %d\n",
 593                                 err);
 594                         goto err_gpio_wp;
 595                 }
 596                 gpio_direction_input(GPIO95_MMC_WP);
 597         } else {
 598                 err = gpio_request(GPIO38_SD_PWEN, "sdio power");
 599                 if (err) {
 600                         dev_err(dev, "can't request MMC power control : %d\n",
 601                                 err);
 602                         goto err_gpio_wp;
 603                 }
 604                 gpio_direction_output(GPIO38_SD_PWEN, 1);
 605         }
 606
 607         return 0;
 608
 609 err_gpio_wp:
 610         free_irq(gpio_to_irq(mmc_cd), data);
 611 err_irq:
 612         regulator_put(em_x270_sdio_ldo);
 613
 614         return err;
 615 }
 616
 617 static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 618 {
 619         struct pxamci_platform_data* p_d = dev->platform_data;
 620
 621         if ((1 << vdd) & p_d->ocr_mask) {
 622                 int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
 623
 624                 regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
 625                 regulator_enable(em_x270_sdio_ldo);
 626         } else {
 627                 regulator_disable(em_x270_sdio_ldo);
 628         }
 629 }
 630
 631 static void em_x270_mci_exit(struct device *dev, void *data)
 632 {
 633         free_irq(gpio_to_irq(mmc_cd), data);
 634         regulator_put(em_x270_sdio_ldo);
 635
 636         if (machine_is_em_x270())
 637                 gpio_free(GPIO95_MMC_WP);
 638         else
 639                 gpio_free(GPIO38_SD_PWEN);
 640 }
 641
 642 static int em_x270_mci_get_ro(struct device *dev)
 643 {
 644         return gpio_get_value(GPIO95_MMC_WP);
 645 }
 646
 647 static struct pxamci_platform_data em_x270_mci_platform_data = {
 648         .ocr_mask       = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
 649                           MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
 650                           MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
 651                           MMC_VDD_30_31|MMC_VDD_31_32,
 652         .init           = em_x270_mci_init,
 653         .setpower       = em_x270_mci_setpower,
 654         .exit           = em_x270_mci_exit,
 655 };
 656
 657 static void __init em_x270_init_mmc(void)
 658 {
 659         if (machine_is_em_x270())
 660                 em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
 661
 662         em_x270_mci_platform_data.detect_delay  = msecs_to_jiffies(250);
 663         pxa_set_mci_info(&em_x270_mci_platform_data);
 664 }
 665 #else
 666 static inline void em_x270_init_mmc(void) {}
 667 #endif
 668
 669 /* LCD */
 670 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 671 static struct pxafb_mode_info em_x270_lcd_modes[] = {
 672         [0] = {
 673                 .pixclock       = 38250,
 674                 .bpp            = 16,
 675                 .xres           = 480,
 676                 .yres           = 640,
 677                 .hsync_len      = 8,
 678                 .vsync_len      = 2,
 679                 .left_margin    = 8,
 680                 .upper_margin   = 2,
 681                 .right_margin   = 24,
 682                 .lower_margin   = 4,
 683                 .sync           = 0,
 684         },
 685         [1] = {
 686                 .pixclock       = 153800,
 687                 .bpp            = 16,
 688                 .xres           = 240,
 689                 .yres           = 320,
 690                 .hsync_len      = 8,
 691                 .vsync_len      = 2,
 692                 .left_margin    = 8,
 693                 .upper_margin   = 2,
 694                 .right_margin   = 88,
 695                 .lower_margin   = 2,
 696                 .sync           = 0,
 697         },
 698 };
 699
 700 static struct pxafb_mach_info em_x270_lcd = {
 701         .modes          = em_x270_lcd_modes,
 702         .num_modes      = 2,
 703         .lcd_conn       = LCD_COLOR_TFT_16BPP,
 704 };
 705
 706 static void __init em_x270_init_lcd(void)
 707 {
 708         set_pxa_fb_info(&em_x270_lcd);
 709 }
 710 #else
 711 static inline void em_x270_init_lcd(void) {}
 712 #endif
 713
 714 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
 715 static struct pxa2xx_spi_master em_x270_spi_info = {
 716         .num_chipselect = 1,
 717 };
 718
 719 static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
 720         .rx_threshold   = 1,
 721         .tx_threshold   = 1,
 722         .gpio_cs        = -1,
 723 };
 724
 725 static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
 726         .model = TDO35S,
 727 };
 728
 729 static struct pxa2xx_spi_master em_x270_spi_2_info = {
 730         .num_chipselect = 1,
 731         .enable_dma     = 1,
 732 };
 733
 734 static struct pxa2xx_spi_chip em_x270_libertas_chip = {
 735         .rx_threshold   = 1,
 736         .tx_threshold   = 1,
 737         .timeout        = 1000,
 738 };
 739
 740 static unsigned long em_x270_libertas_pin_config[] = {
 741         /* SSP2 */
 742         GPIO19_SSP2_SCLK,
 743         GPIO14_GPIO,
 744         GPIO89_SSP2_TXD,
 745         GPIO88_SSP2_RXD,
 746 };
 747
 748 static int em_x270_libertas_setup(struct spi_device *spi)
 749 {
 750         int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
 751         if (err)
 752                 return err;
 753
 754         err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
 755         if (err)
 756                 goto err_free_pwen;
 757
 758         if (machine_is_exeda()) {
 759                 err = gpio_request(GPIO37_WLAN_RST, "WLAN RST");
 760                 if (err)
 761                         goto err_free_strap;
 762
 763                 gpio_direction_output(GPIO37_WLAN_RST, 1);
 764                 msleep(100);
 765         }
 766
 767         gpio_direction_output(GPIO19_WLAN_STRAP, 1);
 768         msleep(100);
 769
 770         pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
 771
 772         gpio_direction_output(GPIO115_WLAN_PWEN, 0);
 773         msleep(100);
 774         gpio_set_value(GPIO115_WLAN_PWEN, 1);
 775         msleep(100);
 776
 777         spi->bits_per_word = 16;
 778         spi_setup(spi);
 779
 780         return 0;
 781
 782 err_free_strap:
 783         gpio_free(GPIO19_WLAN_STRAP);
 784 err_free_pwen:
 785         gpio_free(GPIO115_WLAN_PWEN);
 786
 787         return err;
 788 }
 789
 790 static int em_x270_libertas_teardown(struct spi_device *spi)
 791 {
 792         gpio_set_value(GPIO115_WLAN_PWEN, 0);
 793         gpio_free(GPIO115_WLAN_PWEN);
 794         gpio_free(GPIO19_WLAN_STRAP);
 795
 796         if (machine_is_exeda()) {
 797                 gpio_set_value(GPIO37_WLAN_RST, 0);
 798                 gpio_free(GPIO37_WLAN_RST);
 799         }
 800
 801         return 0;
 802 }
 803
 804 struct libertas_spi_platform_data em_x270_libertas_pdata = {
 805         .use_dummy_writes       = 1,
 806         .gpio_cs                = 14,
 807         .setup                  = em_x270_libertas_setup,
 808         .teardown               = em_x270_libertas_teardown,
 809 };
 810
 811 static struct spi_board_info em_x270_spi_devices[] __initdata = {
 812         {
 813                 .modalias               = "tdo24m",
 814                 .max_speed_hz           = 1000000,
 815                 .bus_num                = 1,
 816                 .chip_select            = 0,
 817                 .controller_data        = &em_x270_tdo24m_chip,
 818                 .platform_data          = &em_x270_tdo24m_pdata,
 819         },
 820         {
 821                 .modalias               = "libertas_spi",
 822                 .max_speed_hz           = 13000000,
 823                 .bus_num                = 2,
 824                 .irq                    = IRQ_GPIO(116),
 825                 .chip_select            = 0,
 826                 .controller_data        = &em_x270_libertas_chip,
 827                 .platform_data          = &em_x270_libertas_pdata,
 828         },
 829 };
 830
 831 static void __init em_x270_init_spi(void)
 832 {
 833         pxa2xx_set_spi_info(1, &em_x270_spi_info);
 834         pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
 835         spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
 836 }
 837 #else
 838 static inline void em_x270_init_spi(void) {}
 839 #endif
 840
 841 #if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
 842 static void __init em_x270_init_ac97(void)
 843 {
 844         pxa_set_ac97_info(NULL);
 845 }
 846 #else
 847 static inline void em_x270_init_ac97(void) {}
 848 #endif
 849
 850 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 851 static unsigned int em_x270_module_matrix_keys[] = {
 852         KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
 853         KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
 854         KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
 855 };
 856
 857 struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
 858         /* code map for the matrix keys */
 859         .matrix_key_rows        = 3,
 860         .matrix_key_cols        = 3,
 861         .matrix_key_map         = em_x270_module_matrix_keys,
 862         .matrix_key_map_size    = ARRAY_SIZE(em_x270_module_matrix_keys),
 863 };
 864
 865 static unsigned int em_x270_exeda_matrix_keys[] = {
 866         KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
 867         KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
 868         KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
 869         KEY(0, 6, KEY_ENTER), KEY(0, 7, KEY_SLASH),
 870
 871         KEY(1, 0, KEY_DOT), KEY(1, 1, KEY_M),
 872         KEY(1, 2, KEY_N), KEY(1, 3, KEY_B),
 873         KEY(1, 4, KEY_V), KEY(1, 5, KEY_C),
 874         KEY(1, 6, KEY_X), KEY(1, 7, KEY_Z),
 875
 876         KEY(2, 0, KEY_LEFTSHIFT), KEY(2, 1, KEY_SEMICOLON),
 877         KEY(2, 2, KEY_L), KEY(2, 3, KEY_K),
 878         KEY(2, 4, KEY_J), KEY(2, 5, KEY_H),
 879         KEY(2, 6, KEY_G), KEY(2, 7, KEY_F),
 880
 881         KEY(3, 0, KEY_D), KEY(3, 1, KEY_S),
 882         KEY(3, 2, KEY_A), KEY(3, 3, KEY_TAB),
 883         KEY(3, 4, KEY_BACKSPACE), KEY(3, 5, KEY_P),
 884         KEY(3, 6, KEY_O), KEY(3, 7, KEY_I),
 885
 886         KEY(4, 0, KEY_U), KEY(4, 1, KEY_Y),
 887         KEY(4, 2, KEY_T), KEY(4, 3, KEY_R),
 888         KEY(4, 4, KEY_E), KEY(4, 5, KEY_W),
 889         KEY(4, 6, KEY_Q), KEY(4, 7, KEY_MINUS),
 890
 891         KEY(5, 0, KEY_0), KEY(5, 1, KEY_9),
 892         KEY(5, 2, KEY_8), KEY(5, 3, KEY_7),
 893         KEY(5, 4, KEY_6), KEY(5, 5, KEY_5),
 894         KEY(5, 6, KEY_4), KEY(5, 7, KEY_3),
 895
 896         KEY(6, 0, KEY_2), KEY(6, 1, KEY_1),
 897         KEY(6, 2, KEY_ENTER), KEY(6, 3, KEY_END),
 898         KEY(6, 4, KEY_DOWN), KEY(6, 5, KEY_UP),
 899         KEY(6, 6, KEY_MENU), KEY(6, 7, KEY_F1),
 900
 901         KEY(7, 0, KEY_LEFT), KEY(7, 1, KEY_RIGHT),
 902         KEY(7, 2, KEY_BACK), KEY(7, 3, KEY_HOME),
 903         KEY(7, 4, 0), KEY(7, 5, 0),
 904         KEY(7, 6, 0), KEY(7, 7, 0),
 905 };
 906
 907 struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
 908         /* code map for the matrix keys */
 909         .matrix_key_rows        = 8,
 910         .matrix_key_cols        = 8,
 911         .matrix_key_map         = em_x270_exeda_matrix_keys,
 912         .matrix_key_map_size    = ARRAY_SIZE(em_x270_exeda_matrix_keys),
 913 };
 914
 915 static void __init em_x270_init_keypad(void)
 916 {
 917         if (machine_is_em_x270())
 918                 pxa_set_keypad_info(&em_x270_module_keypad_info);
 919         else
 920                 pxa_set_keypad_info(&em_x270_exeda_keypad_info);
 921 }
 922 #else
 923 static inline void em_x270_init_keypad(void) {}
 924 #endif
 925
 926 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 927 static struct gpio_keys_button gpio_keys_button[] = {
 928         [0] = {
 929                 .desc   = "sleep/wakeup",
 930                 .code   = KEY_SUSPEND,
 931                 .type   = EV_PWR,
 932                 .gpio   = 1,
 933                 .wakeup = 1,
 934         },
 935 };
 936
 937 static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
 938         .buttons        = gpio_keys_button,
 939         .nbuttons       = 1,
 940 };
 941
 942 static struct platform_device em_x270_gpio_keys = {
 943         .name           = "gpio-keys",
 944         .id             = -1,
 945         .dev            = {
 946                 .platform_data  = &em_x270_gpio_keys_data,
 947         },
 948 };
 949
 950 static void __init em_x270_init_gpio_keys(void)
 951 {
 952         platform_device_register(&em_x270_gpio_keys);
 953 }
 954 #else
 955 static inline void em_x270_init_gpio_keys(void) {}
 956 #endif
 957
 958 /* Quick Capture Interface and sensor setup */
 959 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 960 static struct regulator *em_x270_camera_ldo;
 961
 962 static int em_x270_sensor_init(struct device *dev)
 963 {
 964         int ret;
 965
 966         ret = gpio_request(cam_reset, "camera reset");
 967         if (ret)
 968                 return ret;
 969
 970         gpio_direction_output(cam_reset, 0);
 971
 972         em_x270_camera_ldo = regulator_get(NULL, "vcc cam");
 973         if (em_x270_camera_ldo == NULL) {
 974                 gpio_free(cam_reset);
 975                 return -ENODEV;
 976         }
 977
 978         ret = regulator_enable(em_x270_camera_ldo);
 979         if (ret) {
 980                 regulator_put(em_x270_camera_ldo);
 981                 gpio_free(cam_reset);
 982                 return ret;
 983         }
 984
 985         gpio_set_value(cam_reset, 1);
 986
 987         return 0;
 988 }
 989
 990 struct pxacamera_platform_data em_x270_camera_platform_data = {
 991         .init   = em_x270_sensor_init,
 992         .flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 993                 PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 994         .mclk_10khz = 2600,
 995 };
 996
 997 static int em_x270_sensor_power(struct device *dev, int on)
 998 {
 999         int ret;
1000         int is_on = regulator_is_enabled(em_x270_camera_ldo);
1001
1002         if (on == is_on)
1003                 return 0;
1004
1005         gpio_set_value(cam_reset, !on);
1006
1007         if (on)
1008                 ret = regulator_enable(em_x270_camera_ldo);
1009         else
1010                 ret = regulator_disable(em_x270_camera_ldo);
1011
1012         if (ret)
1013                 return ret;
1014
1015         gpio_set_value(cam_reset, on);
1016
1017         return 0;
1018 }
1019
1020 static struct soc_camera_link iclink = {
1021         .bus_id = 0,
1022         .power = em_x270_sensor_power,
1023 };
1024
1025 static struct i2c_board_info em_x270_i2c_cam_info[] = {
1026         {
1027                 I2C_BOARD_INFO("mt9m111", 0x48),
1028                 .platform_data = &iclink,
1029         },
1030 };
1031
1032 static void  __init em_x270_init_camera(void)
1033 {
1034         i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
1035         pxa_set_camera_info(&em_x270_camera_platform_data);
1036 }
1037 #else
1038 static inline void em_x270_init_camera(void) {}
1039 #endif
1040
1041 /* DA9030 related initializations */
1042 #define REGULATOR_CONSUMER(_name, _dev, _supply)                               \
1043         static struct regulator_consumer_supply _name##_consumers[] = { \
1044                 {                                                       \
1045                         .dev = _dev,                                    \
1046                         .supply = _supply,                              \
1047                 },                                                      \
1048         }
1049
1050 REGULATOR_CONSUMER(ldo3, NULL, "vcc gps");
1051 REGULATOR_CONSUMER(ldo5, NULL, "vcc cam");
1052 REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
1053 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
1054 REGULATOR_CONSUMER(ldo19, NULL, "vcc gprs");
1055
1056 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)               \
1057         static struct regulator_init_data _ldo##_data = {               \
1058                 .constraints = {                                        \
1059                         .min_uV = _min_uV,                              \
1060                         .max_uV = _max_uV,                              \
1061                         .state_mem = {                                  \
1062                                 .enabled = 0,                           \
1063                         },                                              \
1064                         .valid_ops_mask = _ops_mask,                    \
1065                 },                                                      \
1066                 .num_consumer_supplies = ARRAY_SIZE(_ldo##_consumers),  \
1067                 .consumer_supplies = _ldo##_consumers,                  \
1068         };
1069
1070 REGULATOR_INIT(ldo3, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
1071 REGULATOR_INIT(ldo5, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1072 REGULATOR_INIT(ldo10, 2000000, 3200000,
1073                REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
1074 REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
1075 REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
1076
1077 struct led_info em_x270_led_info = {
1078         .name = "em-x270:orange",
1079         .default_trigger = "battery-charging-or-full",
1080 };
1081
1082 struct power_supply_info em_x270_psy_info = {
1083         .name = "battery",
1084         .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
1085         .voltage_max_design = 4200000,
1086         .voltage_min_design = 3000000,
1087         .use_for_apm = 1,
1088 };
1089
1090 static void em_x270_battery_low(void)
1091 {
1092         apm_queue_event(APM_LOW_BATTERY);
1093 }
1094
1095 static void em_x270_battery_critical(void)
1096 {
1097         apm_queue_event(APM_CRITICAL_SUSPEND);
1098 }
1099
1100 struct da9030_battery_info em_x270_batterty_info = {
1101         .battery_info = &em_x270_psy_info,
1102
1103         .charge_milliamp = 1000,
1104         .charge_millivolt = 4200,
1105
1106         .vbat_low = 3600,
1107         .vbat_crit = 3400,
1108         .vbat_charge_start = 4100,
1109         .vbat_charge_stop = 4200,
1110         .vbat_charge_restart = 4000,
1111
1112         .vcharge_min = 3200,
1113         .vcharge_max = 5500,
1114
1115         .tbat_low = 197,
1116         .tbat_high = 78,
1117         .tbat_restart = 100,
1118
1119         .batmon_interval = 0,
1120
1121         .battery_low = em_x270_battery_low,
1122         .battery_critical = em_x270_battery_critical,
1123 };
1124
1125 #define DA9030_SUBDEV(_name, _id, _pdata)       \
1126         {                                       \
1127                 .name = "da903x-" #_name,       \
1128                 .id = DA9030_ID_##_id,          \
1129                 .platform_data = _pdata,        \
1130         }
1131
1132 #define DA9030_LDO(num) DA9030_SUBDEV(regulator, LDO##num, &ldo##num##_data)
1133
1134 struct da903x_subdev_info em_x270_da9030_subdevs[] = {
1135         DA9030_LDO(3),
1136         DA9030_LDO(5),
1137         DA9030_LDO(10),
1138         DA9030_LDO(12),
1139         DA9030_LDO(19),
1140
1141         DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
1142         DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
1143         DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
1144 };
1145
1146 static struct da903x_platform_data em_x270_da9030_info = {
1147         .num_subdevs = ARRAY_SIZE(em_x270_da9030_subdevs),
1148         .subdevs = em_x270_da9030_subdevs,
1149 };
1150
1151 static struct i2c_board_info em_x270_i2c_pmic_info = {
1152         I2C_BOARD_INFO("da9030", 0x49),
1153         .irq = IRQ_GPIO(0),
1154         .platform_data = &em_x270_da9030_info,
1155 };
1156
1157 static struct i2c_pxa_platform_data em_x270_pwr_i2c_info = {
1158         .use_pio = 1,
1159 };
1160
1161 static void __init em_x270_init_da9030(void)
1162 {
1163         pxa27x_set_i2c_power_info(&em_x270_pwr_i2c_info);
1164         i2c_register_board_info(1, &em_x270_i2c_pmic_info, 1);
1165 }
1166
1167 static struct pca953x_platform_data exeda_gpio_ext_pdata = {
1168         .gpio_base = 128,
1169 };
1170
1171 static struct i2c_board_info exeda_i2c_info[] = {
1172         {
1173                 I2C_BOARD_INFO("pca9555", 0x21),
1174                 .platform_data = &exeda_gpio_ext_pdata,
1175         },
1176 };
1177
1178 static struct i2c_pxa_platform_data em_x270_i2c_info = {
1179         .fast_mode = 1,
1180 };
1181
1182 static void __init em_x270_init_i2c(void)
1183 {
1184         pxa_set_i2c_info(&em_x270_i2c_info);
1185
1186         if (machine_is_exeda())
1187                 i2c_register_board_info(0, ARRAY_AND_SIZE(exeda_i2c_info));
1188 }
1189
1190 static void __init em_x270_module_init(void)
1191 {
1192         pr_info("%s\n", __func__);
1193         pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
1194
1195         mmc_cd = GPIO13_MMC_CD;
1196         nand_rb = GPIO56_NAND_RB;
1197         dm9000_flags = DM9000_PLATF_32BITONLY;
1198         cam_reset = GPIO93_CAM_RESET;
1199         usb_hub_reset = GPIO16_USB_HUB_RESET;
1200 }
1201
1202 static void __init em_x270_exeda_init(void)
1203 {
1204         pr_info("%s\n", __func__);
1205         pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
1206
1207         mmc_cd = GPIO114_MMC_CD;
1208         nand_rb = GPIO20_NAND_RB;
1209         dm9000_flags = DM9000_PLATF_16BITONLY;
1210         cam_reset = GPIO130_CAM_RESET;
1211         usb_hub_reset = GPIO10_USB_HUB_RESET;
1212 }
1213
1214 static void __init em_x270_init(void)
1215 {
1216         pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
1217
1218 #ifdef CONFIG_PM
1219         pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
1220 #endif
1221
1222         if (machine_is_em_x270())
1223                 em_x270_module_init();
1224         else if (machine_is_exeda())
1225                 em_x270_exeda_init();
1226         else
1227                 panic("Unsupported machine: %d\n", machine_arch_type);
1228
1229         em_x270_init_da9030();
1230         em_x270_init_dm9000();
1231         em_x270_init_rtc();
1232         em_x270_init_nand();
1233         em_x270_init_nor();
1234         em_x270_init_lcd();
1235         em_x270_init_mmc();
1236         em_x270_init_ohci();
1237         em_x270_init_keypad();
1238         em_x270_init_gpio_keys();
1239         em_x270_init_ac97();
1240         em_x270_init_spi();
1241         em_x270_init_i2c();
1242         em_x270_init_camera();
1243 }
1244
1245 MACHINE_START(EM_X270, "Compulab EM-X270")
1246         .boot_params    = 0xa0000100,
1247         .phys_io        = 0x40000000,
1248         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
1249         .map_io         = pxa_map_io,
1250         .init_irq       = pxa27x_init_irq,
1251         .timer          = &pxa_timer,
1252         .init_machine   = em_x270_init,
1253 MACHINE_END
1254
1255 MACHINE_START(EXEDA, "Compulab eXeda")
1256         .boot_params    = 0xa0000100,
1257         .phys_io        = 0x40000000,
1258         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
1259         .map_io         = pxa_map_io,
1260         .init_irq       = pxa27x_init_irq,
1261         .timer          = &pxa_timer,
1262         .init_machine   = em_x270_init,
1263 MACHINE_END