arch/arm/mach-omap2/omap_phy_internal.c

   1 /*
   2   * This file configures the internal USB PHY in OMAP4430. Used
   3   * with TWL6030 transceiver and MUSB on OMAP4430.
   4   *
   5   * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
   6   * This program is free software; you can redistribute it and/or modify
   7   * it under the terms of the GNU General Public License as published by
   8   * the Free Software Foundation; either version 2 of the License, or
   9   * (at your option) any later version.
  10   *
  11   * Author: Hema HK <hemahk@ti.com>
  12   *
  13   * This program is distributed in the hope that it will be useful,
  14   * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16   * GNU General Public License for more details.
  17   *
  18   * You should have received a copy of the GNU General Public License
  19   * along with this program; if not, write to the Free Software
  20   * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21   *
  22   */
  23
  24 #include <linux/types.h>
  25 #include <linux/delay.h>
  26 #include <linux/clk.h>
  27 #include <linux/io.h>
  28 #include <linux/err.h>
  29 #include <linux/usb.h>
  30
  31 #include <plat/usb.h>
  32 #include "control.h"
  33
  34 /* OMAP control module register for UTMI PHY */
  35 #define CONTROL_DEV_CONF                0x300
  36 #define PHY_PD                          0x1
  37
  38 #define USBOTGHS_CONTROL                0x33c
  39 #define AVALID                          BIT(0)
  40 #define BVALID                          BIT(1)
  41 #define VBUSVALID                       BIT(2)
  42 #define SESSEND                         BIT(3)
  43 #define IDDIG                           BIT(4)
  44
  45 static struct clk *phyclk, *clk48m, *clk32k;
  46 static void __iomem *ctrl_base;
  47 static int usbotghs_control;
  48
  49 int omap4430_phy_init(struct device *dev)
  50 {
  51         ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
  52         if (!ctrl_base) {
  53                 dev_err(dev, "control module ioremap failed\n");
  54                 return -ENOMEM;
  55         }
  56         /* Power down the phy */
  57         __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
  58         phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
  59
  60         if (IS_ERR(phyclk)) {
  61                 dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
  62                 iounmap(ctrl_base);
  63                 return PTR_ERR(phyclk);
  64         }
  65
  66         clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
  67         if (IS_ERR(clk48m)) {
  68                 dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
  69                 clk_put(phyclk);
  70                 iounmap(ctrl_base);
  71                 return PTR_ERR(clk48m);
  72         }
  73
  74         clk32k = clk_get(dev, "usb_phy_cm_clk32k");
  75         if (IS_ERR(clk32k)) {
  76                 dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
  77                 clk_put(phyclk);
  78                 clk_put(clk48m);
  79                 iounmap(ctrl_base);
  80                 return PTR_ERR(clk32k);
  81         }
  82         return 0;
  83 }
  84
  85 int omap4430_phy_set_clk(struct device *dev, int on)
  86 {
  87         static int state;
  88
  89         if (on && !state) {
  90                 /* Enable the phy clocks */
  91                 clk_enable(phyclk);
  92                 clk_enable(clk48m);
  93                 clk_enable(clk32k);
  94                 state = 1;
  95         } else if (state) {
  96                 /* Disable the phy clocks */
  97                 clk_disable(phyclk);
  98                 clk_disable(clk48m);
  99                 clk_disable(clk32k);
 100                 state = 0;
 101         }
 102         return 0;
 103 }
 104
 105 int omap4430_phy_power(struct device *dev, int ID, int on)
 106 {
 107         if (on) {
 108                 if (ID)
 109                         /* enable VBUS valid, IDDIG groung */
 110                         __raw_writel(AVALID | VBUSVALID, ctrl_base +
 111                                                         USBOTGHS_CONTROL);
 112                 else
 113                         /*
 114                          * Enable VBUS Valid, AValid and IDDIG
 115                          * high impedence
 116                          */
 117                         __raw_writel(IDDIG | AVALID | VBUSVALID,
 118                                                 ctrl_base + USBOTGHS_CONTROL);
 119         } else {
 120                 /* Enable session END and IDIG to high impedence. */
 121                 __raw_writel(SESSEND | IDDIG, ctrl_base +
 122                                         USBOTGHS_CONTROL);
 123         }
 124         return 0;
 125 }
 126
 127 int omap4430_phy_suspend(struct device *dev, int suspend)
 128 {
 129         if (suspend) {
 130                 /* Disable the clocks */
 131                 omap4430_phy_set_clk(dev, 0);
 132                 /* Power down the phy */
 133                 __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 134
 135                 /* save the context */
 136                 usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
 137         } else {
 138                 /* Enable the internel phy clcoks */
 139                 omap4430_phy_set_clk(dev, 1);
 140                 /* power on the phy */
 141                 if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
 142                         __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 143                         mdelay(200);
 144                 }
 145
 146                 /* restore the context */
 147                 __raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
 148         }
 149
 150         return 0;
 151 }
 152
 153 int omap4430_phy_exit(struct device *dev)
 154 {
 155         if (ctrl_base)
 156                 iounmap(ctrl_base);
 157         if (phyclk)
 158                 clk_put(phyclk);
 159         if (clk48m)
 160                 clk_put(clk48m);
 161         if (clk32k)
 162                 clk_put(clk32k);
 163
 164         return 0;
 165 }
 166
 167 void am35x_musb_reset(void)
 168 {
 169         u32     regval;
 170
 171         /* Reset the musb interface */
 172         regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
 173
 174         regval |= AM35XX_USBOTGSS_SW_RST;
 175         omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
 176
 177         regval &= ~AM35XX_USBOTGSS_SW_RST;
 178         omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
 179
 180         regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
 181 }
 182
 183 void am35x_musb_phy_power(u8 on)
 184 {
 185         unsigned long timeout = jiffies + msecs_to_jiffies(100);
 186         u32 devconf2;
 187
 188         if (on) {
 189                 /*
 190                  * Start the on-chip PHY and its PLL.
 191                  */
 192                 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 193
 194                 devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
 195                 devconf2 |= CONF2_PHY_PLLON;
 196
 197                 omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 198
 199                 pr_info(KERN_INFO "Waiting for PHY clock good...\n");
 200                 while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
 201                                 & CONF2_PHYCLKGD)) {
 202                         cpu_relax();
 203
 204                         if (time_after(jiffies, timeout)) {
 205                                 pr_err(KERN_ERR "musb PHY clock good timed out\n");
 206                                 break;
 207                         }
 208                 }
 209         } else {
 210                 /*
 211                  * Power down the on-chip PHY.
 212                  */
 213                 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 214
 215                 devconf2 &= ~CONF2_PHY_PLLON;
 216                 devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
 217                 omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 218         }
 219 }
 220
 221 void am35x_musb_clear_irq(void)
 222 {
 223         u32 regval;
 224
 225         regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 226         regval |= AM35XX_USBOTGSS_INT_CLR;
 227         omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
 228         regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 229 }
 230
 231 void am35x_musb_set_mode(u8 musb_mode)
 232 {
 233         u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 234
 235         devconf2 &= ~CONF2_OTGMODE;
 236         switch (musb_mode) {
 237 #ifdef  CONFIG_USB_MUSB_HDRC_HCD
 238         case MUSB_HOST:         /* Force VBUS valid, ID = 0 */
 239                 devconf2 |= CONF2_FORCE_HOST;
 240                 break;
 241 #endif
 242 #ifdef  CONFIG_USB_GADGET_MUSB_HDRC
 243         case MUSB_PERIPHERAL:   /* Force VBUS valid, ID = 1 */
 244                 devconf2 |= CONF2_FORCE_DEVICE;
 245                 break;
 246 #endif
 247 #ifdef  CONFIG_USB_MUSB_OTG
 248         case MUSB_OTG:          /* Don't override the VBUS/ID comparators */
 249                 devconf2 |= CONF2_NO_OVERRIDE;
 250                 break;
 251 #endif
 252         default:
 253                 pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
 254         }
 255
 256         omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 257 }