arch/arm/mach-omap2/control.c

   1 /*
   2  * OMAP2/3 System Control Module register access
   3  *
   4  * Copyright (C) 2007 Texas Instruments, Inc.
   5  * Copyright (C) 2007 Nokia Corporation
   6  *
   7  * Written by Paul Walmsley
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13 #undef DEBUG
  14
  15 #include <linux/kernel.h>
  16 #include <linux/io.h>
  17
  18 #include <plat/common.h>
  19 #include <plat/sdrc.h>
  20
  21 #include "cm-regbits-34xx.h"
  22 #include "prm-regbits-34xx.h"
  23 #include "cm.h"
  24 #include "prm.h"
  25 #include "sdrc.h"
  26 #include "pm.h"
  27 #include "control.h"
  28
  29 static void __iomem *omap2_ctrl_base;
  30 static void __iomem *omap4_ctrl_pad_base;
  31
  32 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
  33 struct omap3_scratchpad {
  34         u32 boot_config_ptr;
  35         u32 public_restore_ptr;
  36         u32 secure_ram_restore_ptr;
  37         u32 sdrc_module_semaphore;
  38         u32 prcm_block_offset;
  39         u32 sdrc_block_offset;
  40 };
  41
  42 struct omap3_scratchpad_prcm_block {
  43         u32 prm_clksrc_ctrl;
  44         u32 prm_clksel;
  45         u32 cm_clksel_core;
  46         u32 cm_clksel_wkup;
  47         u32 cm_clken_pll;
  48         u32 cm_autoidle_pll;
  49         u32 cm_clksel1_pll;
  50         u32 cm_clksel2_pll;
  51         u32 cm_clksel3_pll;
  52         u32 cm_clken_pll_mpu;
  53         u32 cm_autoidle_pll_mpu;
  54         u32 cm_clksel1_pll_mpu;
  55         u32 cm_clksel2_pll_mpu;
  56         u32 prcm_block_size;
  57 };
  58
  59 struct omap3_scratchpad_sdrc_block {
  60         u16 sysconfig;
  61         u16 cs_cfg;
  62         u16 sharing;
  63         u16 err_type;
  64         u32 dll_a_ctrl;
  65         u32 dll_b_ctrl;
  66         u32 power;
  67         u32 cs_0;
  68         u32 mcfg_0;
  69         u16 mr_0;
  70         u16 emr_1_0;
  71         u16 emr_2_0;
  72         u16 emr_3_0;
  73         u32 actim_ctrla_0;
  74         u32 actim_ctrlb_0;
  75         u32 rfr_ctrl_0;
  76         u32 cs_1;
  77         u32 mcfg_1;
  78         u16 mr_1;
  79         u16 emr_1_1;
  80         u16 emr_2_1;
  81         u16 emr_3_1;
  82         u32 actim_ctrla_1;
  83         u32 actim_ctrlb_1;
  84         u32 rfr_ctrl_1;
  85         u16 dcdl_1_ctrl;
  86         u16 dcdl_2_ctrl;
  87         u32 flags;
  88         u32 block_size;
  89 };
  90
  91 void *omap3_secure_ram_storage;
  92
  93 /*
  94  * This is used to store ARM registers in SDRAM before attempting
  95  * an MPU OFF. The save and restore happens from the SRAM sleep code.
  96  * The address is stored in scratchpad, so that it can be used
  97  * during the restore path.
  98  */
  99 u32 omap3_arm_context[128];
 100
 101 struct omap3_control_regs {
 102         u32 sysconfig;
 103         u32 devconf0;
 104         u32 mem_dftrw0;
 105         u32 mem_dftrw1;
 106         u32 msuspendmux_0;
 107         u32 msuspendmux_1;
 108         u32 msuspendmux_2;
 109         u32 msuspendmux_3;
 110         u32 msuspendmux_4;
 111         u32 msuspendmux_5;
 112         u32 sec_ctrl;
 113         u32 devconf1;
 114         u32 csirxfe;
 115         u32 iva2_bootaddr;
 116         u32 iva2_bootmod;
 117         u32 debobs_0;
 118         u32 debobs_1;
 119         u32 debobs_2;
 120         u32 debobs_3;
 121         u32 debobs_4;
 122         u32 debobs_5;
 123         u32 debobs_6;
 124         u32 debobs_7;
 125         u32 debobs_8;
 126         u32 prog_io0;
 127         u32 prog_io1;
 128         u32 dss_dpll_spreading;
 129         u32 core_dpll_spreading;
 130         u32 per_dpll_spreading;
 131         u32 usbhost_dpll_spreading;
 132         u32 pbias_lite;
 133         u32 temp_sensor;
 134         u32 sramldo4;
 135         u32 sramldo5;
 136         u32 csi;
 137 };
 138
 139 static struct omap3_control_regs control_context;
 140 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 141
 142 #define OMAP_CTRL_REGADDR(reg)          (omap2_ctrl_base + (reg))
 143 #define OMAP4_CTRL_PAD_REGADDR(reg)     (omap4_ctrl_pad_base + (reg))
 144
 145 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 146 {
 147         /* Static mapping, never released */
 148         if (omap2_globals->ctrl) {
 149                 omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
 150                 WARN_ON(!omap2_ctrl_base);
 151         }
 152
 153         /* Static mapping, never released */
 154         if (omap2_globals->ctrl_pad) {
 155                 omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
 156                 WARN_ON(!omap4_ctrl_pad_base);
 157         }
 158 }
 159
 160 void __iomem *omap_ctrl_base_get(void)
 161 {
 162         return omap2_ctrl_base;
 163 }
 164
 165 u8 omap_ctrl_readb(u16 offset)
 166 {
 167         return __raw_readb(OMAP_CTRL_REGADDR(offset));
 168 }
 169
 170 u16 omap_ctrl_readw(u16 offset)
 171 {
 172         return __raw_readw(OMAP_CTRL_REGADDR(offset));
 173 }
 174
 175 u32 omap_ctrl_readl(u16 offset)
 176 {
 177         return __raw_readl(OMAP_CTRL_REGADDR(offset));
 178 }
 179
 180 void omap_ctrl_writeb(u8 val, u16 offset)
 181 {
 182         __raw_writeb(val, OMAP_CTRL_REGADDR(offset));
 183 }
 184
 185 void omap_ctrl_writew(u16 val, u16 offset)
 186 {
 187         __raw_writew(val, OMAP_CTRL_REGADDR(offset));
 188 }
 189
 190 void omap_ctrl_writel(u32 val, u16 offset)
 191 {
 192         __raw_writel(val, OMAP_CTRL_REGADDR(offset));
 193 }
 194
 195 /*
 196  * On OMAP4 control pad are not addressable from control
 197  * core base. So the common omap_ctrl_read/write APIs breaks
 198  * Hence export separate APIs to manage the omap4 pad control
 199  * registers. This APIs will work only for OMAP4
 200  */
 201
 202 u32 omap4_ctrl_pad_readl(u16 offset)
 203 {
 204         return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
 205 }
 206
 207 void omap4_ctrl_pad_writel(u32 val, u16 offset)
 208 {
 209         __raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
 210 }
 211
 212 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 213 /*
 214  * Clears the scratchpad contents in case of cold boot-
 215  * called during bootup
 216  */
 217 void omap3_clear_scratchpad_contents(void)
 218 {
 219         u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
 220         void __iomem *v_addr;
 221         u32 offset = 0;
 222         v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
 223         if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
 224             OMAP3430_GLOBAL_COLD_RST_MASK) {
 225                 for ( ; offset <= max_offset; offset += 0x4)
 226                         __raw_writel(0x0, (v_addr + offset));
 227                 prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
 228                                      OMAP3430_GR_MOD,
 229                                      OMAP3_PRM_RSTST_OFFSET);
 230         }
 231 }
 232
 233 /* Populate the scratchpad structure with restore structure */
 234 void omap3_save_scratchpad_contents(void)
 235 {
 236         void  __iomem *scratchpad_address;
 237         u32 arm_context_addr;
 238         struct omap3_scratchpad scratchpad_contents;
 239         struct omap3_scratchpad_prcm_block prcm_block_contents;
 240         struct omap3_scratchpad_sdrc_block sdrc_block_contents;
 241
 242         /*
 243          * Populate the Scratchpad contents
 244          *
 245          * The "get_*restore_pointer" functions are used to provide a
 246          * physical restore address where the ROM code jumps while waking
 247          * up from MPU OFF/OSWR state.
 248          * The restore pointer is stored into the scratchpad.
 249          */
 250         scratchpad_contents.boot_config_ptr = 0x0;
 251         if (cpu_is_omap3630())
 252                 scratchpad_contents.public_restore_ptr =
 253                         virt_to_phys(get_omap3630_restore_pointer());
 254         else if (omap_rev() != OMAP3430_REV_ES3_0 &&
 255                                         omap_rev() != OMAP3430_REV_ES3_1)
 256                 scratchpad_contents.public_restore_ptr =
 257                         virt_to_phys(get_restore_pointer());
 258         else
 259                 scratchpad_contents.public_restore_ptr =
 260                         virt_to_phys(get_es3_restore_pointer());
 261         if (omap_type() == OMAP2_DEVICE_TYPE_GP)
 262                 scratchpad_contents.secure_ram_restore_ptr = 0x0;
 263         else
 264                 scratchpad_contents.secure_ram_restore_ptr =
 265                         (u32) __pa(omap3_secure_ram_storage);
 266         scratchpad_contents.sdrc_module_semaphore = 0x0;
 267         scratchpad_contents.prcm_block_offset = 0x2C;
 268         scratchpad_contents.sdrc_block_offset = 0x64;
 269
 270         /* Populate the PRCM block contents */
 271         prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
 272                         OMAP3_PRM_CLKSRC_CTRL_OFFSET);
 273         prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
 274                         OMAP3_PRM_CLKSEL_OFFSET);
 275         prcm_block_contents.cm_clksel_core =
 276                         cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
 277         prcm_block_contents.cm_clksel_wkup =
 278                         cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 279         prcm_block_contents.cm_clken_pll =
 280                         cm_read_mod_reg(PLL_MOD, CM_CLKEN);
 281         prcm_block_contents.cm_autoidle_pll =
 282                         cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
 283         prcm_block_contents.cm_clksel1_pll =
 284                         cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
 285         prcm_block_contents.cm_clksel2_pll =
 286                         cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
 287         prcm_block_contents.cm_clksel3_pll =
 288                         cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
 289         prcm_block_contents.cm_clken_pll_mpu =
 290                         cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
 291         prcm_block_contents.cm_autoidle_pll_mpu =
 292                         cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
 293         prcm_block_contents.cm_clksel1_pll_mpu =
 294                         cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
 295         prcm_block_contents.cm_clksel2_pll_mpu =
 296                         cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
 297         prcm_block_contents.prcm_block_size = 0x0;
 298
 299         /* Populate the SDRC block contents */
 300         sdrc_block_contents.sysconfig =
 301                         (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
 302         sdrc_block_contents.cs_cfg =
 303                         (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
 304         sdrc_block_contents.sharing =
 305                         (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
 306         sdrc_block_contents.err_type =
 307                         (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
 308         sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
 309         sdrc_block_contents.dll_b_ctrl = 0x0;
 310         /*
 311          * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
 312          * be programed to issue automatic self refresh on timeout
 313          * of AUTO_CNT = 1 prior to any transition to OFF mode.
 314          */
 315         if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
 316                         && (omap_rev() >= OMAP3430_REV_ES3_0))
 317                 sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
 318                                 ~(SDRC_POWER_AUTOCOUNT_MASK|
 319                                 SDRC_POWER_CLKCTRL_MASK)) |
 320                                 (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
 321                                 SDRC_SELF_REFRESH_ON_AUTOCOUNT;
 322         else
 323                 sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
 324
 325         sdrc_block_contents.cs_0 = 0x0;
 326         sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
 327         sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
 328         sdrc_block_contents.emr_1_0 = 0x0;
 329         sdrc_block_contents.emr_2_0 = 0x0;
 330         sdrc_block_contents.emr_3_0 = 0x0;
 331         sdrc_block_contents.actim_ctrla_0 =
 332                         sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
 333         sdrc_block_contents.actim_ctrlb_0 =
 334                         sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
 335         sdrc_block_contents.rfr_ctrl_0 =
 336                         sdrc_read_reg(SDRC_RFR_CTRL_0);
 337         sdrc_block_contents.cs_1 = 0x0;
 338         sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
 339         sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
 340         sdrc_block_contents.emr_1_1 = 0x0;
 341         sdrc_block_contents.emr_2_1 = 0x0;
 342         sdrc_block_contents.emr_3_1 = 0x0;
 343         sdrc_block_contents.actim_ctrla_1 =
 344                         sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
 345         sdrc_block_contents.actim_ctrlb_1 =
 346                         sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
 347         sdrc_block_contents.rfr_ctrl_1 =
 348                         sdrc_read_reg(SDRC_RFR_CTRL_1);
 349         sdrc_block_contents.dcdl_1_ctrl = 0x0;
 350         sdrc_block_contents.dcdl_2_ctrl = 0x0;
 351         sdrc_block_contents.flags = 0x0;
 352         sdrc_block_contents.block_size = 0x0;
 353
 354         arm_context_addr = virt_to_phys(omap3_arm_context);
 355
 356         /* Copy all the contents to the scratchpad location */
 357         scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
 358         memcpy_toio(scratchpad_address, &scratchpad_contents,
 359                  sizeof(scratchpad_contents));
 360         /* Scratchpad contents being 32 bits, a divide by 4 done here */
 361         memcpy_toio(scratchpad_address +
 362                 scratchpad_contents.prcm_block_offset,
 363                 &prcm_block_contents, sizeof(prcm_block_contents));
 364         memcpy_toio(scratchpad_address +
 365                 scratchpad_contents.sdrc_block_offset,
 366                 &sdrc_block_contents, sizeof(sdrc_block_contents));
 367         /*
 368          * Copies the address of the location in SDRAM where ARM
 369          * registers get saved during a MPU OFF transition.
 370          */
 371         memcpy_toio(scratchpad_address +
 372                 scratchpad_contents.sdrc_block_offset +
 373                 sizeof(sdrc_block_contents), &arm_context_addr, 4);
 374 }
 375
 376 void omap3_control_save_context(void)
 377 {
 378         control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
 379         control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
 380         control_context.mem_dftrw0 =
 381                         omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
 382         control_context.mem_dftrw1 =
 383                         omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
 384         control_context.msuspendmux_0 =
 385                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
 386         control_context.msuspendmux_1 =
 387                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
 388         control_context.msuspendmux_2 =
 389                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
 390         control_context.msuspendmux_3 =
 391                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
 392         control_context.msuspendmux_4 =
 393                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
 394         control_context.msuspendmux_5 =
 395                         omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
 396         control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
 397         control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
 398         control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
 399         control_context.iva2_bootaddr =
 400                         omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
 401         control_context.iva2_bootmod =
 402                         omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
 403         control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
 404         control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
 405         control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
 406         control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
 407         control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
 408         control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
 409         control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
 410         control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
 411         control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
 412         control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
 413         control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
 414         control_context.dss_dpll_spreading =
 415                         omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
 416         control_context.core_dpll_spreading =
 417                         omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
 418         control_context.per_dpll_spreading =
 419                         omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
 420         control_context.usbhost_dpll_spreading =
 421                 omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
 422         control_context.pbias_lite =
 423                         omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
 424         control_context.temp_sensor =
 425                         omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
 426         control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
 427         control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
 428         control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
 429         return;
 430 }
 431
 432 void omap3_control_restore_context(void)
 433 {
 434         omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
 435         omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
 436         omap_ctrl_writel(control_context.mem_dftrw0,
 437                                         OMAP343X_CONTROL_MEM_DFTRW0);
 438         omap_ctrl_writel(control_context.mem_dftrw1,
 439                                         OMAP343X_CONTROL_MEM_DFTRW1);
 440         omap_ctrl_writel(control_context.msuspendmux_0,
 441                                         OMAP2_CONTROL_MSUSPENDMUX_0);
 442         omap_ctrl_writel(control_context.msuspendmux_1,
 443                                         OMAP2_CONTROL_MSUSPENDMUX_1);
 444         omap_ctrl_writel(control_context.msuspendmux_2,
 445                                         OMAP2_CONTROL_MSUSPENDMUX_2);
 446         omap_ctrl_writel(control_context.msuspendmux_3,
 447                                         OMAP2_CONTROL_MSUSPENDMUX_3);
 448         omap_ctrl_writel(control_context.msuspendmux_4,
 449                                         OMAP2_CONTROL_MSUSPENDMUX_4);
 450         omap_ctrl_writel(control_context.msuspendmux_5,
 451                                         OMAP2_CONTROL_MSUSPENDMUX_5);
 452         omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
 453         omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
 454         omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
 455         omap_ctrl_writel(control_context.iva2_bootaddr,
 456                                         OMAP343X_CONTROL_IVA2_BOOTADDR);
 457         omap_ctrl_writel(control_context.iva2_bootmod,
 458                                         OMAP343X_CONTROL_IVA2_BOOTMOD);
 459         omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
 460         omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
 461         omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
 462         omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
 463         omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
 464         omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
 465         omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
 466         omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
 467         omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
 468         omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
 469         omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
 470         omap_ctrl_writel(control_context.dss_dpll_spreading,
 471                                         OMAP343X_CONTROL_DSS_DPLL_SPREADING);
 472         omap_ctrl_writel(control_context.core_dpll_spreading,
 473                                         OMAP343X_CONTROL_CORE_DPLL_SPREADING);
 474         omap_ctrl_writel(control_context.per_dpll_spreading,
 475                                         OMAP343X_CONTROL_PER_DPLL_SPREADING);
 476         omap_ctrl_writel(control_context.usbhost_dpll_spreading,
 477                                 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
 478         omap_ctrl_writel(control_context.pbias_lite,
 479                                         OMAP343X_CONTROL_PBIAS_LITE);
 480         omap_ctrl_writel(control_context.temp_sensor,
 481                                         OMAP343X_CONTROL_TEMP_SENSOR);
 482         omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
 483         omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
 484         omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
 485         return;
 486 }
 487
 488 void omap3630_ctrl_disable_rta(void)
 489 {
 490         if (!cpu_is_omap3630())
 491                 return;
 492         omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
 493 }
 494
 495 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */