2 * Board support file for OMAP4430 based PandaBoard.
4 * Copyright (C) 2010 Texas Instruments
6 * Author: David Anders <x0132446@ti.com>
8 * Based on mach-omap2/board-4430sdp.c
10 * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
12 * Based on mach-omap2/board-3430sdp.c
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/platform_device.h>
22 #include <linux/clk.h>
24 #include <linux/leds.h>
25 #include <linux/gpio.h>
26 #include <linux/usb/otg.h>
27 #include <linux/i2c/twl.h>
28 #include <linux/regulator/machine.h>
29 #include <linux/regulator/fixed.h>
30 #include <linux/wl12xx.h>
32 #include <mach/hardware.h>
33 #include <mach/omap4-common.h>
34 #include <asm/mach-types.h>
35 #include <asm/mach/arch.h>
36 #include <asm/mach/map.h>
37 #include <video/omapdss.h>
39 #include <plat/board.h>
40 #include <plat/common.h>
43 #include <video/omap-panel-generic-dpi.h>
48 #include "common-board-devices.h"
50 #define GPIO_HUB_POWER 1
51 #define GPIO_HUB_NRESET 62
52 #define GPIO_WIFI_PMENA 43
53 #define GPIO_WIFI_IRQ 53
54 #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
55 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
57 /* wl127x BT, FM, GPS connectivity chip */
58 static int wl1271_gpios[] = {46, -1, -1};
59 static struct platform_device wl1271_device = {
63 .platform_data = &wl1271_gpios,
67 static struct gpio_led gpio_leds[] = {
69 .name = "pandaboard::status1",
70 .default_trigger = "heartbeat",
74 .name = "pandaboard::status2",
75 .default_trigger = "mmc0",
80 static struct gpio_led_platform_data gpio_led_info = {
82 .num_leds = ARRAY_SIZE(gpio_leds),
85 static struct platform_device leds_gpio = {
89 .platform_data = &gpio_led_info,
93 static struct platform_device *panda_devices[] __initdata = {
98 static void __init omap4_panda_init_early(void)
100 omap2_init_common_infrastructure();
103 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
104 .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
105 .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
106 .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
108 .reset_gpio_port[0] = -EINVAL,
109 .reset_gpio_port[1] = -EINVAL,
110 .reset_gpio_port[2] = -EINVAL
113 static struct gpio panda_ehci_gpios[] __initdata = {
114 { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
115 { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
118 static void __init omap4_ehci_init(void)
121 struct clk *phy_ref_clk;
123 /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
124 phy_ref_clk = clk_get(NULL, "auxclk3_ck");
125 if (IS_ERR(phy_ref_clk)) {
126 pr_err("Cannot request auxclk3\n");
129 clk_set_rate(phy_ref_clk, 19200000);
130 clk_enable(phy_ref_clk);
132 /* disable the power to the usb hub prior to init and reset phy+hub */
133 ret = gpio_request_array(panda_ehci_gpios,
134 ARRAY_SIZE(panda_ehci_gpios));
136 pr_err("Unable to initialize EHCI power/reset\n");
140 gpio_export(GPIO_HUB_POWER, 0);
141 gpio_export(GPIO_HUB_NRESET, 0);
142 gpio_set_value(GPIO_HUB_NRESET, 1);
144 usbhs_init(&usbhs_bdata);
146 /* enable power to hub */
147 gpio_set_value(GPIO_HUB_POWER, 1);
150 static struct omap_musb_board_data musb_board_data = {
151 .interface_type = MUSB_INTERFACE_UTMI,
156 static struct omap2_hsmmc_info mmc[] = {
159 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
166 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
169 .ocr_mask = MMC_VDD_165_195,
170 .nonremovable = true,
175 static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
176 REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
179 static struct regulator_init_data panda_vmmc5 = {
181 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
183 .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
184 .consumer_supplies = omap4_panda_vmmc5_supply,
187 static struct fixed_voltage_config panda_vwlan = {
188 .supply_name = "vwl1271",
189 .microvolts = 1800000, /* 1.8V */
190 .gpio = GPIO_WIFI_PMENA,
191 .startup_delay = 70000, /* 70msec */
193 .enabled_at_boot = 0,
194 .init_data = &panda_vmmc5,
197 static struct platform_device omap_vwlan_device = {
198 .name = "reg-fixed-voltage",
201 .platform_data = &panda_vwlan,
205 struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
206 .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
207 /* PANDA ref clock is 38.4 MHz */
208 .board_ref_clock = 2,
211 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
214 struct platform_device *pdev = container_of(dev,
215 struct platform_device, dev);
216 struct omap_mmc_platform_data *pdata = dev->platform_data;
219 dev_err(dev, "%s: NULL platform data\n", __func__);
222 /* Setting MMC1 Card detect Irq */
224 ret = twl6030_mmc_card_detect_config();
226 dev_err(dev, "%s: Error card detect config(%d)\n",
229 pdata->slots[0].card_detect = twl6030_mmc_card_detect;
234 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
236 struct omap_mmc_platform_data *pdata;
238 /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
240 pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
243 pdata = dev->platform_data;
245 pdata->init = omap4_twl6030_hsmmc_late_init;
248 static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
250 struct omap2_hsmmc_info *c;
252 omap2_hsmmc_init(controllers);
253 for (c = controllers; c->mmc; c++)
254 omap4_twl6030_hsmmc_set_late_init(c->dev);
259 /* Panda board uses the common PMIC configuration */
260 static struct twl4030_platform_data omap4_panda_twldata;
263 * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
264 * is connected as I2C slave device, and can be accessed at address 0x50
266 static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
268 I2C_BOARD_INFO("eeprom", 0x50),
272 static int __init omap4_panda_i2c_init(void)
274 omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
275 TWL_COMMON_REGULATOR_VDAC |
276 TWL_COMMON_REGULATOR_VAUX2 |
277 TWL_COMMON_REGULATOR_VAUX3 |
278 TWL_COMMON_REGULATOR_VMMC |
279 TWL_COMMON_REGULATOR_VPP |
280 TWL_COMMON_REGULATOR_VANA |
281 TWL_COMMON_REGULATOR_VCXIO |
282 TWL_COMMON_REGULATOR_VUSB |
283 TWL_COMMON_REGULATOR_CLK32KG);
284 omap4_pmic_init("twl6030", &omap4_panda_twldata);
285 omap_register_i2c_bus(2, 400, NULL, 0);
287 * Bus 3 is attached to the DVI port where devices like the pico DLP
288 * projector don't work reliably with 400kHz
290 omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
291 ARRAY_SIZE(panda_i2c_eeprom));
292 omap_register_i2c_bus(4, 400, NULL, 0);
296 #ifdef CONFIG_OMAP_MUX
297 static struct omap_board_mux board_mux[] __initdata = {
298 /* WLAN IRQ - GPIO 53 */
299 OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
300 /* WLAN POWER ENABLE - GPIO 43 */
301 OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
302 /* WLAN SDIO: MMC5 CMD */
303 OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
304 /* WLAN SDIO: MMC5 CLK */
305 OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
306 /* WLAN SDIO: MMC5 DAT[0-3] */
307 OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
308 OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
309 OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
310 OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
311 /* gpio 0 - TFP410 PD */
312 OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
314 OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
316 OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
318 OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
320 OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
322 OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
324 OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
326 OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
328 OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
330 OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
332 OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
334 OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
336 OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
338 OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
340 OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
342 OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
344 OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
346 OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
348 OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
350 OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
352 OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
354 OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
356 OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
358 OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
360 OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
362 OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
364 OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
366 OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
368 OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
369 { .reg_offset = OMAP_MUX_TERMINATOR },
372 static struct omap_device_pad serial2_pads[] __initdata = {
373 OMAP_MUX_STATIC("uart2_cts.uart2_cts",
374 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
375 OMAP_MUX_STATIC("uart2_rts.uart2_rts",
376 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
377 OMAP_MUX_STATIC("uart2_rx.uart2_rx",
378 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
379 OMAP_MUX_STATIC("uart2_tx.uart2_tx",
380 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
383 static struct omap_device_pad serial3_pads[] __initdata = {
384 OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
385 OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
386 OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
387 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
388 OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
389 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
390 OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
391 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
394 static struct omap_device_pad serial4_pads[] __initdata = {
395 OMAP_MUX_STATIC("uart4_rx.uart4_rx",
396 OMAP_PIN_INPUT | OMAP_MUX_MODE0),
397 OMAP_MUX_STATIC("uart4_tx.uart4_tx",
398 OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
401 static struct omap_board_data serial2_data __initdata = {
403 .pads = serial2_pads,
404 .pads_cnt = ARRAY_SIZE(serial2_pads),
407 static struct omap_board_data serial3_data __initdata = {
409 .pads = serial3_pads,
410 .pads_cnt = ARRAY_SIZE(serial3_pads),
413 static struct omap_board_data serial4_data __initdata = {
415 .pads = serial4_pads,
416 .pads_cnt = ARRAY_SIZE(serial4_pads),
419 static inline void board_serial_init(void)
421 struct omap_board_data bdata;
426 /* pass dummy data for UART1 */
427 omap_serial_init_port(&bdata);
429 omap_serial_init_port(&serial2_data);
430 omap_serial_init_port(&serial3_data);
431 omap_serial_init_port(&serial4_data);
434 #define board_mux NULL
436 static inline void board_serial_init(void)
443 #define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
445 static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
447 gpio_set_value(dssdev->reset_gpio, 1);
451 static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
453 gpio_set_value(dssdev->reset_gpio, 0);
456 /* Using generic display panel */
457 static struct panel_generic_dpi_data omap4_dvi_panel = {
459 .platform_enable = omap4_panda_enable_dvi,
460 .platform_disable = omap4_panda_disable_dvi,
463 struct omap_dss_device omap4_panda_dvi_device = {
464 .type = OMAP_DISPLAY_TYPE_DPI,
466 .driver_name = "generic_dpi_panel",
467 .data = &omap4_dvi_panel,
468 .phy.dpi.data_lines = 24,
469 .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
470 .channel = OMAP_DSS_CHANNEL_LCD2,
473 int __init omap4_panda_dvi_init(void)
477 /* Requesting TFP410 DVI GPIO and disabling it, at bootup */
478 r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
479 GPIOF_OUT_INIT_LOW, "DVI PD");
481 pr_err("Failed to get DVI powerdown GPIO\n");
487 static void omap4_panda_hdmi_mux_init(void)
489 /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
490 omap_mux_init_signal("hdmi_hpd",
491 OMAP_PIN_INPUT_PULLUP);
492 omap_mux_init_signal("hdmi_cec",
493 OMAP_PIN_INPUT_PULLUP);
494 /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
495 omap_mux_init_signal("hdmi_ddc_scl",
496 OMAP_PIN_INPUT_PULLUP);
497 omap_mux_init_signal("hdmi_ddc_sda",
498 OMAP_PIN_INPUT_PULLUP);
501 static struct gpio panda_hdmi_gpios[] = {
502 { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
503 { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
506 static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
510 status = gpio_request_array(panda_hdmi_gpios,
511 ARRAY_SIZE(panda_hdmi_gpios));
513 pr_err("Cannot request HDMI GPIOs\n");
518 static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
520 gpio_free(HDMI_GPIO_LS_OE);
521 gpio_free(HDMI_GPIO_HPD);
524 static struct omap_dss_device omap4_panda_hdmi_device = {
526 .driver_name = "hdmi_panel",
527 .type = OMAP_DISPLAY_TYPE_HDMI,
528 .platform_enable = omap4_panda_panel_enable_hdmi,
529 .platform_disable = omap4_panda_panel_disable_hdmi,
530 .channel = OMAP_DSS_CHANNEL_DIGIT,
533 static struct omap_dss_device *omap4_panda_dss_devices[] = {
534 &omap4_panda_dvi_device,
535 &omap4_panda_hdmi_device,
538 static struct omap_dss_board_info omap4_panda_dss_data = {
539 .num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
540 .devices = omap4_panda_dss_devices,
541 .default_device = &omap4_panda_dvi_device,
544 void omap4_panda_display_init(void)
548 r = omap4_panda_dvi_init();
550 pr_err("error initializing panda DVI\n");
552 omap4_panda_hdmi_mux_init();
553 omap_display_init(&omap4_panda_dss_data);
556 static void __init omap4_panda_init(void)
558 int package = OMAP_PACKAGE_CBS;
560 if (omap_rev() == OMAP4430_REV_ES1_0)
561 package = OMAP_PACKAGE_CBL;
562 omap4_mux_init(board_mux, NULL, package);
564 if (wl12xx_set_platform_data(&omap_panda_wlan_data))
565 pr_err("error setting wl12xx data\n");
567 omap4_panda_i2c_init();
568 platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
569 platform_device_register(&omap_vwlan_device);
571 omap_sdrc_init(NULL, NULL);
572 omap4_twl6030_hsmmc_init(mmc);
574 usb_musb_init(&musb_board_data);
575 omap4_panda_display_init();
578 static void __init omap4_panda_map_io(void)
580 omap2_set_globals_443x();
581 omap44xx_map_common_io();
584 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
585 /* Maintainer: David Anders - Texas Instruments Inc */
586 .boot_params = 0x80000100,
587 .reserve = omap_reserve,
588 .map_io = omap4_panda_map_io,
589 .init_early = omap4_panda_init_early,
590 .init_irq = gic_init_irq,
591 .init_machine = omap4_panda_init,
592 .timer = &omap4_timer,