2 * linux/arch/arm/mach-omap2/board-3430sdp.c
4 * Copyright (C) 2007 Texas Instruments
6 * Modified from mach-omap2/board-generic.c
8 * Initial code: Syed Mohammed Khasim
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/delay.h>
19 #include <linux/input.h>
20 #include <linux/input/matrix_keypad.h>
21 #include <linux/spi/spi.h>
22 #include <linux/spi/ads7846.h>
23 #include <linux/i2c/twl.h>
24 #include <linux/regulator/machine.h>
26 #include <linux/gpio.h>
27 #include <linux/mmc/host.h>
29 #include <mach/hardware.h>
30 #include <asm/mach-types.h>
31 #include <asm/mach/arch.h>
32 #include <asm/mach/map.h>
34 #include <plat/mcspi.h>
35 #include <plat/board.h>
37 #include <plat/common.h>
39 #include <plat/gpmc.h>
40 #include <plat/display.h>
41 #include <plat/panel-generic-dpi.h>
43 #include <plat/gpmc-smc91x.h>
45 #include "board-flash.h"
47 #include "sdram-qimonda-hyb18m512160af-6.h"
52 #define CONFIG_DISABLE_HFCLK 1
54 #define SDP3430_TS_GPIO_IRQ_SDPV1 3
55 #define SDP3430_TS_GPIO_IRQ_SDPV2 2
57 #define ENABLE_VAUX3_DEDICATED 0x03
58 #define ENABLE_VAUX3_DEV_GRP 0x20
60 #define TWL4030_MSECURE_GPIO 22
62 /* FIXME: These values need to be updated based on more profiling on 3430sdp*/
63 static struct cpuidle_params omap3_cpuidle_params_table[] = {
71 {1, 1500, 1800, 4000},
73 {1, 2500, 7500, 12000},
75 {1, 3000, 8500, 15000},
77 {1, 10000, 30000, 300000},
80 static uint32_t board_keymap[] = {
114 static struct matrix_keymap_data board_map_data = {
115 .keymap = board_keymap,
116 .keymap_size = ARRAY_SIZE(board_keymap),
119 static struct twl4030_keypad_data sdp3430_kp_data = {
120 .keymap_data = &board_map_data,
126 static int ts_gpio; /* Needed for ads7846_get_pendown_state */
129 * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
131 * @return - void. If request gpio fails then Flag KERN_ERR.
133 static void ads7846_dev_init(void)
135 if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
136 printk(KERN_ERR "can't get ads746 pen down GPIO\n");
140 gpio_direction_input(ts_gpio);
141 gpio_set_debounce(ts_gpio, 310);
144 static int ads7846_get_pendown_state(void)
146 return !gpio_get_value(ts_gpio);
149 static struct ads7846_platform_data tsc2046_config __initdata = {
150 .get_pendown_state = ads7846_get_pendown_state,
156 static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
158 .single_channel = 1, /* 0: slave, 1: master */
161 static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
164 * TSC2046 operates at a max freqency of 2MHz, so
165 * operate slightly below at 1.5MHz
167 .modalias = "ads7846",
170 .max_speed_hz = 1500000,
171 .controller_data = &tsc2046_mcspi_config,
173 .platform_data = &tsc2046_config,
178 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
179 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5
181 static unsigned backlight_gpio;
182 static unsigned enable_gpio;
183 static int lcd_enabled;
184 static int dvi_enabled;
186 static void __init sdp3430_display_init(void)
190 enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
191 backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
193 r = gpio_request(enable_gpio, "LCD reset");
195 printk(KERN_ERR "failed to get LCD reset GPIO\n");
199 r = gpio_request(backlight_gpio, "LCD Backlight");
201 printk(KERN_ERR "failed to get LCD backlight GPIO\n");
205 gpio_direction_output(enable_gpio, 0);
206 gpio_direction_output(backlight_gpio, 0);
210 gpio_free(enable_gpio);
215 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
218 printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
222 gpio_direction_output(enable_gpio, 1);
223 gpio_direction_output(backlight_gpio, 1);
230 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
234 gpio_direction_output(enable_gpio, 0);
235 gpio_direction_output(backlight_gpio, 0);
238 static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
241 printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
250 static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
255 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
260 static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
265 static struct omap_dss_device sdp3430_lcd_device = {
267 .driver_name = "sharp_ls_panel",
268 .type = OMAP_DISPLAY_TYPE_DPI,
269 .phy.dpi.data_lines = 16,
270 .platform_enable = sdp3430_panel_enable_lcd,
271 .platform_disable = sdp3430_panel_disable_lcd,
274 static struct panel_generic_dpi_data dvi_panel = {
276 .platform_enable = sdp3430_panel_enable_dvi,
277 .platform_disable = sdp3430_panel_disable_dvi,
280 static struct omap_dss_device sdp3430_dvi_device = {
282 .type = OMAP_DISPLAY_TYPE_DPI,
283 .driver_name = "generic_dpi_panel",
285 .phy.dpi.data_lines = 24,
288 static struct omap_dss_device sdp3430_tv_device = {
290 .driver_name = "venc",
291 .type = OMAP_DISPLAY_TYPE_VENC,
292 .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
293 .platform_enable = sdp3430_panel_enable_tv,
294 .platform_disable = sdp3430_panel_disable_tv,
298 static struct omap_dss_device *sdp3430_dss_devices[] = {
304 static struct omap_dss_board_info sdp3430_dss_data = {
305 .num_devices = ARRAY_SIZE(sdp3430_dss_devices),
306 .devices = sdp3430_dss_devices,
307 .default_device = &sdp3430_lcd_device,
310 static struct platform_device sdp3430_dss_device = {
314 .platform_data = &sdp3430_dss_data,
318 static struct platform_device *sdp3430_devices[] __initdata = {
322 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
325 static void __init omap_3430sdp_init_early(void)
327 omap_board_config = sdp3430_config;
328 omap_board_config_size = ARRAY_SIZE(sdp3430_config);
329 omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
330 omap2_init_common_infrastructure();
331 omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
334 static int sdp3430_batt_table[] = {
336 30800, 29500, 28300, 27100,
337 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
338 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
339 11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
340 8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
341 5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
342 4040, 3910, 3790, 3670, 3550
345 static struct twl4030_bci_platform_data sdp3430_bci_data = {
346 .battery_tmp_tbl = sdp3430_batt_table,
347 .tblsize = ARRAY_SIZE(sdp3430_batt_table),
350 static struct omap2_hsmmc_info mmc[] = {
353 /* 8 bits (default) requires S6.3 == ON,
354 * so the SIM card isn't used; else 4 bits.
356 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
361 .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
367 static int sdp3430_twl_gpio_setup(struct device *dev,
368 unsigned gpio, unsigned ngpio)
370 /* gpio + 0 is "mmc0_cd" (input/IRQ),
371 * gpio + 1 is "mmc1_cd" (input/IRQ)
373 mmc[0].gpio_cd = gpio + 0;
374 mmc[1].gpio_cd = gpio + 1;
375 omap2_hsmmc_init(mmc);
377 /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
378 gpio_request(gpio + 7, "sub_lcd_en_bkl");
379 gpio_direction_output(gpio + 7, 0);
381 /* gpio + 15 is "sub_lcd_nRST" (output) */
382 gpio_request(gpio + 15, "sub_lcd_nRST");
383 gpio_direction_output(gpio + 15, 0);
388 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
389 .gpio_base = OMAP_MAX_GPIO_LINES,
390 .irq_base = TWL4030_GPIO_IRQ_BASE,
391 .irq_end = TWL4030_GPIO_IRQ_END,
392 .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
394 .setup = sdp3430_twl_gpio_setup,
397 static struct twl4030_usb_data sdp3430_usb_data = {
398 .usb_mode = T2_USB_MODE_ULPI,
401 static struct twl4030_madc_platform_data sdp3430_madc_data = {
405 /* regulator consumer mappings */
408 static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
409 REGULATOR_SUPPLY("vcc", "spi1.0"),
412 static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
413 REGULATOR_SUPPLY("vdda_dac", "omapdss"),
416 /* VPLL2 for digital video outputs */
417 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
418 REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
421 static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
422 REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"),
425 static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
426 REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.0"),
429 static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
430 REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
434 * Apply all the fixed voltages since most versions of U-Boot
435 * don't bother with that initialization.
438 /* VAUX1 for mainboard (irda and sub-lcd) */
439 static struct regulator_init_data sdp3430_vaux1 = {
444 .valid_modes_mask = REGULATOR_MODE_NORMAL
445 | REGULATOR_MODE_STANDBY,
446 .valid_ops_mask = REGULATOR_CHANGE_MODE
447 | REGULATOR_CHANGE_STATUS,
451 /* VAUX2 for camera module */
452 static struct regulator_init_data sdp3430_vaux2 = {
457 .valid_modes_mask = REGULATOR_MODE_NORMAL
458 | REGULATOR_MODE_STANDBY,
459 .valid_ops_mask = REGULATOR_CHANGE_MODE
460 | REGULATOR_CHANGE_STATUS,
464 /* VAUX3 for LCD board */
465 static struct regulator_init_data sdp3430_vaux3 = {
470 .valid_modes_mask = REGULATOR_MODE_NORMAL
471 | REGULATOR_MODE_STANDBY,
472 .valid_ops_mask = REGULATOR_CHANGE_MODE
473 | REGULATOR_CHANGE_STATUS,
475 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies),
476 .consumer_supplies = sdp3430_vaux3_supplies,
479 /* VAUX4 for OMAP VDD_CSI2 (camera) */
480 static struct regulator_init_data sdp3430_vaux4 = {
485 .valid_modes_mask = REGULATOR_MODE_NORMAL
486 | REGULATOR_MODE_STANDBY,
487 .valid_ops_mask = REGULATOR_CHANGE_MODE
488 | REGULATOR_CHANGE_STATUS,
492 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
493 static struct regulator_init_data sdp3430_vmmc1 = {
497 .valid_modes_mask = REGULATOR_MODE_NORMAL
498 | REGULATOR_MODE_STANDBY,
499 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
500 | REGULATOR_CHANGE_MODE
501 | REGULATOR_CHANGE_STATUS,
503 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies),
504 .consumer_supplies = sdp3430_vmmc1_supplies,
507 /* VMMC2 for MMC2 card */
508 static struct regulator_init_data sdp3430_vmmc2 = {
513 .valid_modes_mask = REGULATOR_MODE_NORMAL
514 | REGULATOR_MODE_STANDBY,
515 .valid_ops_mask = REGULATOR_CHANGE_MODE
516 | REGULATOR_CHANGE_STATUS,
518 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies),
519 .consumer_supplies = sdp3430_vmmc2_supplies,
522 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
523 static struct regulator_init_data sdp3430_vsim = {
527 .valid_modes_mask = REGULATOR_MODE_NORMAL
528 | REGULATOR_MODE_STANDBY,
529 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
530 | REGULATOR_CHANGE_MODE
531 | REGULATOR_CHANGE_STATUS,
533 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies),
534 .consumer_supplies = sdp3430_vsim_supplies,
537 /* VDAC for DSS driving S-Video */
538 static struct regulator_init_data sdp3430_vdac = {
543 .valid_modes_mask = REGULATOR_MODE_NORMAL
544 | REGULATOR_MODE_STANDBY,
545 .valid_ops_mask = REGULATOR_CHANGE_MODE
546 | REGULATOR_CHANGE_STATUS,
548 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies),
549 .consumer_supplies = sdp3430_vdda_dac_supplies,
552 static struct regulator_init_data sdp3430_vpll2 = {
558 .valid_modes_mask = REGULATOR_MODE_NORMAL
559 | REGULATOR_MODE_STANDBY,
560 .valid_ops_mask = REGULATOR_CHANGE_MODE
561 | REGULATOR_CHANGE_STATUS,
563 .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
564 .consumer_supplies = sdp3430_vpll2_supplies,
567 static struct twl4030_codec_audio_data sdp3430_audio = {
568 .audio_mclk = 26000000,
571 static struct twl4030_codec_data sdp3430_codec = {
572 .audio_mclk = 26000000,
573 .audio = &sdp3430_audio,
576 static struct twl4030_platform_data sdp3430_twldata = {
577 .irq_base = TWL4030_IRQ_BASE,
578 .irq_end = TWL4030_IRQ_END,
580 /* platform_data for children goes here */
581 .bci = &sdp3430_bci_data,
582 .gpio = &sdp3430_gpio_data,
583 .madc = &sdp3430_madc_data,
584 .keypad = &sdp3430_kp_data,
585 .usb = &sdp3430_usb_data,
586 .codec = &sdp3430_codec,
588 .vaux1 = &sdp3430_vaux1,
589 .vaux2 = &sdp3430_vaux2,
590 .vaux3 = &sdp3430_vaux3,
591 .vaux4 = &sdp3430_vaux4,
592 .vmmc1 = &sdp3430_vmmc1,
593 .vmmc2 = &sdp3430_vmmc2,
594 .vsim = &sdp3430_vsim,
595 .vdac = &sdp3430_vdac,
596 .vpll2 = &sdp3430_vpll2,
599 static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
601 I2C_BOARD_INFO("twl4030", 0x48),
602 .flags = I2C_CLIENT_WAKE,
603 .irq = INT_34XX_SYS_NIRQ,
604 .platform_data = &sdp3430_twldata,
608 static int __init omap3430_i2c_init(void)
610 /* i2c1 for PMIC only */
611 omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
612 ARRAY_SIZE(sdp3430_i2c_boardinfo));
613 /* i2c2 on camera connector (for sensor control) and optional isp1301 */
614 omap_register_i2c_bus(2, 400, NULL, 0);
615 /* i2c3 on display connector (for DVI, tfp410) */
616 omap_register_i2c_bus(3, 400, NULL, 0);
620 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
622 static struct omap_smc91x_platform_data board_smc91x_data = {
624 .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
625 IORESOURCE_IRQ_LOWLEVEL,
628 static void __init board_smc91x_init(void)
630 if (omap_rev() > OMAP3430_REV_ES1_0)
631 board_smc91x_data.gpio_irq = 6;
633 board_smc91x_data.gpio_irq = 29;
635 gpmc_smc91x_init(&board_smc91x_data);
640 static inline void board_smc91x_init(void)
646 static void enable_board_wakeup_source(void)
648 /* T2 interrupt line (keypad) */
649 omap_mux_init_signal("sys_nirq",
650 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
653 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
655 .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
656 .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
657 .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
660 .reset_gpio_port[0] = 57,
661 .reset_gpio_port[1] = 61,
662 .reset_gpio_port[2] = -EINVAL
665 #ifdef CONFIG_OMAP_MUX
666 static struct omap_board_mux board_mux[] __initdata = {
667 { .reg_offset = OMAP_MUX_TERMINATOR },
672 * SDP3430 V2 Board CS organization
673 * Different from SDP3430 V1. Now 4 switches used to specify CS
675 * See also the Switch S8 settings in the comments.
677 static char chip_sel_3430[][GPMC_CS_NUM] = {
678 {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
679 {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
680 {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
683 static struct mtd_partition sdp_nor_partitions[] = {
684 /* bootloader (U-Boot, etc) in first sector */
686 .name = "Bootloader-NOR",
689 .mask_flags = MTD_WRITEABLE, /* force read-only */
691 /* bootloader params in the next sector */
693 .name = "Params-NOR",
694 .offset = MTDPART_OFS_APPEND,
700 .name = "Kernel-NOR",
701 .offset = MTDPART_OFS_APPEND,
707 .name = "Filesystem-NOR",
708 .offset = MTDPART_OFS_APPEND,
709 .size = MTDPART_SIZ_FULL,
714 static struct mtd_partition sdp_onenand_partitions[] = {
716 .name = "X-Loader-OneNAND",
718 .size = 4 * (64 * 2048),
719 .mask_flags = MTD_WRITEABLE /* force read-only */
722 .name = "U-Boot-OneNAND",
723 .offset = MTDPART_OFS_APPEND,
724 .size = 2 * (64 * 2048),
725 .mask_flags = MTD_WRITEABLE /* force read-only */
728 .name = "U-Boot Environment-OneNAND",
729 .offset = MTDPART_OFS_APPEND,
730 .size = 1 * (64 * 2048),
733 .name = "Kernel-OneNAND",
734 .offset = MTDPART_OFS_APPEND,
735 .size = 16 * (64 * 2048),
738 .name = "File System-OneNAND",
739 .offset = MTDPART_OFS_APPEND,
740 .size = MTDPART_SIZ_FULL,
744 static struct mtd_partition sdp_nand_partitions[] = {
745 /* All the partition sizes are listed in terms of NAND block size */
747 .name = "X-Loader-NAND",
749 .size = 4 * (64 * 2048),
750 .mask_flags = MTD_WRITEABLE, /* force read-only */
753 .name = "U-Boot-NAND",
754 .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
755 .size = 10 * (64 * 2048),
756 .mask_flags = MTD_WRITEABLE, /* force read-only */
759 .name = "Boot Env-NAND",
761 .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
762 .size = 6 * (64 * 2048),
765 .name = "Kernel-NAND",
766 .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
767 .size = 40 * (64 * 2048),
770 .name = "File System - NAND",
771 .size = MTDPART_SIZ_FULL,
772 .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
776 static struct flash_partitions sdp_flash_partitions[] = {
778 .parts = sdp_nor_partitions,
779 .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
782 .parts = sdp_onenand_partitions,
783 .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
786 .parts = sdp_nand_partitions,
787 .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
791 static struct omap_musb_board_data musb_board_data = {
792 .interface_type = MUSB_INTERFACE_ULPI,
797 static void __init omap_3430sdp_init(void)
799 omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
801 platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
802 if (omap_rev() > OMAP3430_REV_ES1_0)
803 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
805 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
806 sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
807 spi_register_board_info(sdp3430_spi_board_info,
808 ARRAY_SIZE(sdp3430_spi_board_info));
811 usb_musb_init(&musb_board_data);
813 board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
814 sdp3430_display_init();
815 enable_board_wakeup_source();
816 usb_ehci_init(&ehci_pdata);
819 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
820 /* Maintainer: Syed Khasim - Texas Instruments Inc */
821 .boot_params = 0x80000100,
822 .reserve = omap_reserve,
823 .map_io = omap3_map_io,
824 .init_early = omap_3430sdp_init_early,
825 .init_irq = omap_init_irq,
826 .init_machine = omap_3430sdp_init,
827 .timer = &omap_timer,