arch/arm/mach-omap2/board-3430sdp.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-3430sdp.c
   3  *
   4  * Copyright (C) 2007 Texas Instruments
   5  *
   6  * Modified from mach-omap2/board-generic.c
   7  *
   8  * Initial code: Syed Mohammed Khasim
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/delay.h>
  19 #include <linux/input.h>
  20 #include <linux/input/matrix_keypad.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/spi/ads7846.h>
  23 #include <linux/i2c/twl.h>
  24 #include <linux/regulator/machine.h>
  25 #include <linux/io.h>
  26 #include <linux/gpio.h>
  27
  28 #include <mach/hardware.h>
  29 #include <asm/mach-types.h>
  30 #include <asm/mach/arch.h>
  31 #include <asm/mach/map.h>
  32
  33 #include <plat/mcspi.h>
  34 #include <plat/board.h>
  35 #include <plat/usb.h>
  36 #include <plat/common.h>
  37 #include <plat/dma.h>
  38 #include <plat/gpmc.h>
  39 #include <plat/display.h>
  40
  41 #include <plat/control.h>
  42 #include <plat/gpmc-smc91x.h>
  43
  44 #include "mux.h"
  45 #include "sdram-qimonda-hyb18m512160af-6.h"
  46 #include "mmc-twl4030.h"
  47
  48 #define CONFIG_DISABLE_HFCLK 1
  49
  50 #define SDP3430_TS_GPIO_IRQ_SDPV1       3
  51 #define SDP3430_TS_GPIO_IRQ_SDPV2       2
  52
  53 #define ENABLE_VAUX3_DEDICATED  0x03
  54 #define ENABLE_VAUX3_DEV_GRP    0x20
  55
  56 #define TWL4030_MSECURE_GPIO 22
  57
  58 static int board_keymap[] = {
  59         KEY(0, 0, KEY_LEFT),
  60         KEY(0, 1, KEY_RIGHT),
  61         KEY(0, 2, KEY_A),
  62         KEY(0, 3, KEY_B),
  63         KEY(0, 4, KEY_C),
  64         KEY(1, 0, KEY_DOWN),
  65         KEY(1, 1, KEY_UP),
  66         KEY(1, 2, KEY_E),
  67         KEY(1, 3, KEY_F),
  68         KEY(1, 4, KEY_G),
  69         KEY(2, 0, KEY_ENTER),
  70         KEY(2, 1, KEY_I),
  71         KEY(2, 2, KEY_J),
  72         KEY(2, 3, KEY_K),
  73         KEY(2, 4, KEY_3),
  74         KEY(3, 0, KEY_M),
  75         KEY(3, 1, KEY_N),
  76         KEY(3, 2, KEY_O),
  77         KEY(3, 3, KEY_P),
  78         KEY(3, 4, KEY_Q),
  79         KEY(4, 0, KEY_R),
  80         KEY(4, 1, KEY_4),
  81         KEY(4, 2, KEY_T),
  82         KEY(4, 3, KEY_U),
  83         KEY(4, 4, KEY_D),
  84         KEY(5, 0, KEY_V),
  85         KEY(5, 1, KEY_W),
  86         KEY(5, 2, KEY_L),
  87         KEY(5, 3, KEY_S),
  88         KEY(5, 4, KEY_H),
  89         0
  90 };
  91
  92 static struct matrix_keymap_data board_map_data = {
  93         .keymap                 = board_keymap,
  94         .keymap_size            = ARRAY_SIZE(board_keymap),
  95 };
  96
  97 static struct twl4030_keypad_data sdp3430_kp_data = {
  98         .keymap_data    = &board_map_data,
  99         .rows           = 5,
 100         .cols           = 6,
 101         .rep            = 1,
 102 };
 103
 104 static int ts_gpio;     /* Needed for ads7846_get_pendown_state */
 105
 106 /**
 107  * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
 108  *
 109  * @return - void. If request gpio fails then Flag KERN_ERR.
 110  */
 111 static void ads7846_dev_init(void)
 112 {
 113         if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
 114                 printk(KERN_ERR "can't get ads746 pen down GPIO\n");
 115                 return;
 116         }
 117
 118         gpio_direction_input(ts_gpio);
 119
 120         omap_set_gpio_debounce(ts_gpio, 1);
 121         omap_set_gpio_debounce_time(ts_gpio, 0xa);
 122 }
 123
 124 static int ads7846_get_pendown_state(void)
 125 {
 126         return !gpio_get_value(ts_gpio);
 127 }
 128
 129 static struct ads7846_platform_data tsc2046_config __initdata = {
 130         .get_pendown_state      = ads7846_get_pendown_state,
 131         .keep_vref_on           = 1,
 132 };
 133
 134
 135 static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
 136         .turbo_mode     = 0,
 137         .single_channel = 1,    /* 0: slave, 1: master */
 138 };
 139
 140 static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
 141         [0] = {
 142                 /*
 143                  * TSC2046 operates at a max freqency of 2MHz, so
 144                  * operate slightly below at 1.5MHz
 145                  */
 146                 .modalias               = "ads7846",
 147                 .bus_num                = 1,
 148                 .chip_select            = 0,
 149                 .max_speed_hz           = 1500000,
 150                 .controller_data        = &tsc2046_mcspi_config,
 151                 .irq                    = 0,
 152                 .platform_data          = &tsc2046_config,
 153         },
 154 };
 155
 156
 157 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO        8
 158 #define SDP3430_LCD_PANEL_ENABLE_GPIO           5
 159
 160 static unsigned backlight_gpio;
 161 static unsigned enable_gpio;
 162 static int lcd_enabled;
 163 static int dvi_enabled;
 164
 165 static void __init sdp3430_display_init(void)
 166 {
 167         int r;
 168
 169         enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
 170         backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
 171
 172         r = gpio_request(enable_gpio, "LCD reset");
 173         if (r) {
 174                 printk(KERN_ERR "failed to get LCD reset GPIO\n");
 175                 goto err0;
 176         }
 177
 178         r = gpio_request(backlight_gpio, "LCD Backlight");
 179         if (r) {
 180                 printk(KERN_ERR "failed to get LCD backlight GPIO\n");
 181                 goto err1;
 182         }
 183
 184         gpio_direction_output(enable_gpio, 0);
 185         gpio_direction_output(backlight_gpio, 0);
 186
 187         return;
 188 err1:
 189         gpio_free(enable_gpio);
 190 err0:
 191         return;
 192 }
 193
 194 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
 195 {
 196         if (dvi_enabled) {
 197                 printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
 198                 return -EINVAL;
 199         }
 200
 201         gpio_direction_output(enable_gpio, 1);
 202         gpio_direction_output(backlight_gpio, 1);
 203
 204         lcd_enabled = 1;
 205
 206         return 0;
 207 }
 208
 209 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
 210 {
 211         lcd_enabled = 0;
 212
 213         gpio_direction_output(enable_gpio, 0);
 214         gpio_direction_output(backlight_gpio, 0);
 215 }
 216
 217 static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
 218 {
 219         if (lcd_enabled) {
 220                 printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
 221                 return -EINVAL;
 222         }
 223
 224         dvi_enabled = 1;
 225
 226         return 0;
 227 }
 228
 229 static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
 230 {
 231         dvi_enabled = 0;
 232 }
 233
 234 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
 235 {
 236         return 0;
 237 }
 238
 239 static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
 240 {
 241 }
 242
 243
 244 static struct omap_dss_device sdp3430_lcd_device = {
 245         .name                   = "lcd",
 246         .driver_name            = "sharp_ls_panel",
 247         .type                   = OMAP_DISPLAY_TYPE_DPI,
 248         .phy.dpi.data_lines     = 16,
 249         .platform_enable        = sdp3430_panel_enable_lcd,
 250         .platform_disable       = sdp3430_panel_disable_lcd,
 251 };
 252
 253 static struct omap_dss_device sdp3430_dvi_device = {
 254         .name                   = "dvi",
 255         .driver_name            = "generic_panel",
 256         .type                   = OMAP_DISPLAY_TYPE_DPI,
 257         .phy.dpi.data_lines     = 24,
 258         .platform_enable        = sdp3430_panel_enable_dvi,
 259         .platform_disable       = sdp3430_panel_disable_dvi,
 260 };
 261
 262 static struct omap_dss_device sdp3430_tv_device = {
 263         .name                   = "tv",
 264         .driver_name            = "venc",
 265         .type                   = OMAP_DISPLAY_TYPE_VENC,
 266         .phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
 267         .platform_enable        = sdp3430_panel_enable_tv,
 268         .platform_disable       = sdp3430_panel_disable_tv,
 269 };
 270
 271
 272 static struct omap_dss_device *sdp3430_dss_devices[] = {
 273         &sdp3430_lcd_device,
 274         &sdp3430_dvi_device,
 275         &sdp3430_tv_device,
 276 };
 277
 278 static struct omap_dss_board_info sdp3430_dss_data = {
 279         .num_devices    = ARRAY_SIZE(sdp3430_dss_devices),
 280         .devices        = sdp3430_dss_devices,
 281         .default_device = &sdp3430_lcd_device,
 282 };
 283
 284 static struct platform_device sdp3430_dss_device = {
 285         .name           = "omapdss",
 286         .id             = -1,
 287         .dev            = {
 288                 .platform_data = &sdp3430_dss_data,
 289         },
 290 };
 291
 292 static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
 293         .supply         = "vdda_dac",
 294         .dev            = &sdp3430_dss_device.dev,
 295 };
 296
 297 static struct platform_device *sdp3430_devices[] __initdata = {
 298         &sdp3430_dss_device,
 299 };
 300
 301 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 302 };
 303
 304 static void __init omap_3430sdp_init_irq(void)
 305 {
 306         omap_board_config = sdp3430_config;
 307         omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 308         omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 309         omap_init_irq();
 310         omap_gpio_init();
 311 }
 312
 313 static int sdp3430_batt_table[] = {
 314 /* 0 C*/
 315 30800, 29500, 28300, 27100,
 316 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
 317 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
 318 11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
 319 8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
 320 5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
 321 4040,   3910,   3790,   3670,   3550
 322 };
 323
 324 static struct twl4030_bci_platform_data sdp3430_bci_data = {
 325         .battery_tmp_tbl        = sdp3430_batt_table,
 326         .tblsize                = ARRAY_SIZE(sdp3430_batt_table),
 327 };
 328
 329 static struct twl4030_hsmmc_info mmc[] = {
 330         {
 331                 .mmc            = 1,
 332                 /* 8 bits (default) requires S6.3 == ON,
 333                  * so the SIM card isn't used; else 4 bits.
 334                  */
 335                 .wires          = 8,
 336                 .gpio_wp        = 4,
 337         },
 338         {
 339                 .mmc            = 2,
 340                 .wires          = 8,
 341                 .gpio_wp        = 7,
 342         },
 343         {}      /* Terminator */
 344 };
 345
 346 static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
 347         .supply                 = "vmmc",
 348 };
 349
 350 static struct regulator_consumer_supply sdp3430_vsim_supply = {
 351         .supply                 = "vmmc_aux",
 352 };
 353
 354 static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
 355         .supply                 = "vmmc",
 356 };
 357
 358 static int sdp3430_twl_gpio_setup(struct device *dev,
 359                 unsigned gpio, unsigned ngpio)
 360 {
 361         /* gpio + 0 is "mmc0_cd" (input/IRQ),
 362          * gpio + 1 is "mmc1_cd" (input/IRQ)
 363          */
 364         mmc[0].gpio_cd = gpio + 0;
 365         mmc[1].gpio_cd = gpio + 1;
 366         twl4030_mmc_init(mmc);
 367
 368         /* link regulators to MMC adapters ... we "know" the
 369          * regulators will be set up only *after* we return.
 370          */
 371         sdp3430_vmmc1_supply.dev = mmc[0].dev;
 372         sdp3430_vsim_supply.dev = mmc[0].dev;
 373         sdp3430_vmmc2_supply.dev = mmc[1].dev;
 374
 375         /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 376         gpio_request(gpio + 7, "sub_lcd_en_bkl");
 377         gpio_direction_output(gpio + 7, 0);
 378
 379         /* gpio + 15 is "sub_lcd_nRST" (output) */
 380         gpio_request(gpio + 15, "sub_lcd_nRST");
 381         gpio_direction_output(gpio + 15, 0);
 382
 383         return 0;
 384 }
 385
 386 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
 387         .gpio_base      = OMAP_MAX_GPIO_LINES,
 388         .irq_base       = TWL4030_GPIO_IRQ_BASE,
 389         .irq_end        = TWL4030_GPIO_IRQ_END,
 390         .pulldowns      = BIT(2) | BIT(6) | BIT(8) | BIT(13)
 391                                 | BIT(16) | BIT(17),
 392         .setup          = sdp3430_twl_gpio_setup,
 393 };
 394
 395 static struct twl4030_usb_data sdp3430_usb_data = {
 396         .usb_mode       = T2_USB_MODE_ULPI,
 397 };
 398
 399 static struct twl4030_madc_platform_data sdp3430_madc_data = {
 400         .irq_line       = 1,
 401 };
 402
 403 /*
 404  * Apply all the fixed voltages since most versions of U-Boot
 405  * don't bother with that initialization.
 406  */
 407
 408 /* VAUX1 for mainboard (irda and sub-lcd) */
 409 static struct regulator_init_data sdp3430_vaux1 = {
 410         .constraints = {
 411                 .min_uV                 = 2800000,
 412                 .max_uV                 = 2800000,
 413                 .apply_uV               = true,
 414                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 415                                         | REGULATOR_MODE_STANDBY,
 416                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 417                                         | REGULATOR_CHANGE_STATUS,
 418         },
 419 };
 420
 421 /* VAUX2 for camera module */
 422 static struct regulator_init_data sdp3430_vaux2 = {
 423         .constraints = {
 424                 .min_uV                 = 2800000,
 425                 .max_uV                 = 2800000,
 426                 .apply_uV               = true,
 427                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 428                                         | REGULATOR_MODE_STANDBY,
 429                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 430                                         | REGULATOR_CHANGE_STATUS,
 431         },
 432 };
 433
 434 /* VAUX3 for LCD board */
 435 static struct regulator_init_data sdp3430_vaux3 = {
 436         .constraints = {
 437                 .min_uV                 = 2800000,
 438                 .max_uV                 = 2800000,
 439                 .apply_uV               = true,
 440                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 441                                         | REGULATOR_MODE_STANDBY,
 442                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 443                                         | REGULATOR_CHANGE_STATUS,
 444         },
 445 };
 446
 447 /* VAUX4 for OMAP VDD_CSI2 (camera) */
 448 static struct regulator_init_data sdp3430_vaux4 = {
 449         .constraints = {
 450                 .min_uV                 = 1800000,
 451                 .max_uV                 = 1800000,
 452                 .apply_uV               = true,
 453                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 454                                         | REGULATOR_MODE_STANDBY,
 455                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 456                                         | REGULATOR_CHANGE_STATUS,
 457         },
 458 };
 459
 460 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 461 static struct regulator_init_data sdp3430_vmmc1 = {
 462         .constraints = {
 463                 .min_uV                 = 1850000,
 464                 .max_uV                 = 3150000,
 465                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 466                                         | REGULATOR_MODE_STANDBY,
 467                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 468                                         | REGULATOR_CHANGE_MODE
 469                                         | REGULATOR_CHANGE_STATUS,
 470         },
 471         .num_consumer_supplies  = 1,
 472         .consumer_supplies      = &sdp3430_vmmc1_supply,
 473 };
 474
 475 /* VMMC2 for MMC2 card */
 476 static struct regulator_init_data sdp3430_vmmc2 = {
 477         .constraints = {
 478                 .min_uV                 = 1850000,
 479                 .max_uV                 = 1850000,
 480                 .apply_uV               = true,
 481                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 482                                         | REGULATOR_MODE_STANDBY,
 483                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 484                                         | REGULATOR_CHANGE_STATUS,
 485         },
 486         .num_consumer_supplies  = 1,
 487         .consumer_supplies      = &sdp3430_vmmc2_supply,
 488 };
 489
 490 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
 491 static struct regulator_init_data sdp3430_vsim = {
 492         .constraints = {
 493                 .min_uV                 = 1800000,
 494                 .max_uV                 = 3000000,
 495                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 496                                         | REGULATOR_MODE_STANDBY,
 497                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 498                                         | REGULATOR_CHANGE_MODE
 499                                         | REGULATOR_CHANGE_STATUS,
 500         },
 501         .num_consumer_supplies  = 1,
 502         .consumer_supplies      = &sdp3430_vsim_supply,
 503 };
 504
 505 /* VDAC for DSS driving S-Video */
 506 static struct regulator_init_data sdp3430_vdac = {
 507         .constraints = {
 508                 .min_uV                 = 1800000,
 509                 .max_uV                 = 1800000,
 510                 .apply_uV               = true,
 511                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 512                                         | REGULATOR_MODE_STANDBY,
 513                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 514                                         | REGULATOR_CHANGE_STATUS,
 515         },
 516         .num_consumer_supplies  = 1,
 517         .consumer_supplies      = &sdp3430_vdda_dac_supply,
 518 };
 519
 520 /* VPLL2 for digital video outputs */
 521 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
 522         {
 523                 .supply         = "vdvi",
 524                 .dev            = &sdp3430_lcd_device.dev,
 525         },
 526         {
 527                 .supply         = "vdds_dsi",
 528                 .dev            = &sdp3430_dss_device.dev,
 529         }
 530 };
 531
 532 static struct regulator_init_data sdp3430_vpll2 = {
 533         .constraints = {
 534                 .name                   = "VDVI",
 535                 .min_uV                 = 1800000,
 536                 .max_uV                 = 1800000,
 537                 .apply_uV               = true,
 538                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 539                                         | REGULATOR_MODE_STANDBY,
 540                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 541                                         | REGULATOR_CHANGE_STATUS,
 542         },
 543         .num_consumer_supplies  = ARRAY_SIZE(sdp3430_vpll2_supplies),
 544         .consumer_supplies      = sdp3430_vpll2_supplies,
 545 };
 546
 547 static struct twl4030_codec_audio_data sdp3430_audio = {
 548         .audio_mclk = 26000000,
 549 };
 550
 551 static struct twl4030_codec_data sdp3430_codec = {
 552         .audio_mclk = 26000000,
 553         .audio = &sdp3430_audio,
 554 };
 555
 556 static struct twl4030_platform_data sdp3430_twldata = {
 557         .irq_base       = TWL4030_IRQ_BASE,
 558         .irq_end        = TWL4030_IRQ_END,
 559
 560         /* platform_data for children goes here */
 561         .bci            = &sdp3430_bci_data,
 562         .gpio           = &sdp3430_gpio_data,
 563         .madc           = &sdp3430_madc_data,
 564         .keypad         = &sdp3430_kp_data,
 565         .usb            = &sdp3430_usb_data,
 566         .codec          = &sdp3430_codec,
 567
 568         .vaux1          = &sdp3430_vaux1,
 569         .vaux2          = &sdp3430_vaux2,
 570         .vaux3          = &sdp3430_vaux3,
 571         .vaux4          = &sdp3430_vaux4,
 572         .vmmc1          = &sdp3430_vmmc1,
 573         .vmmc2          = &sdp3430_vmmc2,
 574         .vsim           = &sdp3430_vsim,
 575         .vdac           = &sdp3430_vdac,
 576         .vpll2          = &sdp3430_vpll2,
 577 };
 578
 579 static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
 580         {
 581                 I2C_BOARD_INFO("twl4030", 0x48),
 582                 .flags = I2C_CLIENT_WAKE,
 583                 .irq = INT_34XX_SYS_NIRQ,
 584                 .platform_data = &sdp3430_twldata,
 585         },
 586 };
 587
 588 static int __init omap3430_i2c_init(void)
 589 {
 590         /* i2c1 for PMIC only */
 591         omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
 592                         ARRAY_SIZE(sdp3430_i2c_boardinfo));
 593         /* i2c2 on camera connector (for sensor control) and optional isp1301 */
 594         omap_register_i2c_bus(2, 400, NULL, 0);
 595         /* i2c3 on display connector (for DVI, tfp410) */
 596         omap_register_i2c_bus(3, 400, NULL, 0);
 597         return 0;
 598 }
 599
 600 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 601
 602 static struct omap_smc91x_platform_data board_smc91x_data = {
 603         .cs             = 3,
 604         .flags          = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
 605                                 IORESOURCE_IRQ_LOWLEVEL,
 606 };
 607
 608 static void __init board_smc91x_init(void)
 609 {
 610         if (omap_rev() > OMAP3430_REV_ES1_0)
 611                 board_smc91x_data.gpio_irq = 6;
 612         else
 613                 board_smc91x_data.gpio_irq = 29;
 614
 615         gpmc_smc91x_init(&board_smc91x_data);
 616 }
 617
 618 #else
 619
 620 static inline void board_smc91x_init(void)
 621 {
 622 }
 623
 624 #endif
 625
 626 static void enable_board_wakeup_source(void)
 627 {
 628         /* T2 interrupt line (keypad) */
 629         omap_mux_init_signal("sys_nirq",
 630                 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 631 }
 632
 633 static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 634
 635         .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 636         .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 637         .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 638
 639         .phy_reset  = true,
 640         .reset_gpio_port[0]  = 57,
 641         .reset_gpio_port[1]  = 61,
 642         .reset_gpio_port[2]  = -EINVAL
 643 };
 644
 645 #ifdef CONFIG_OMAP_MUX
 646 static struct omap_board_mux board_mux[] __initdata = {
 647         { .reg_offset = OMAP_MUX_TERMINATOR },
 648 };
 649 #else
 650 #define board_mux       NULL
 651 #endif
 652
 653 static void __init omap_3430sdp_init(void)
 654 {
 655         omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 656         omap3430_i2c_init();
 657         platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
 658         if (omap_rev() > OMAP3430_REV_ES1_0)
 659                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 660         else
 661                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
 662         sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 663         spi_register_board_info(sdp3430_spi_board_info,
 664                                 ARRAY_SIZE(sdp3430_spi_board_info));
 665         ads7846_dev_init();
 666         omap_serial_init();
 667         usb_musb_init();
 668         board_smc91x_init();
 669         sdp3430_display_init();
 670         enable_board_wakeup_source();
 671         usb_ehci_init(&ehci_pdata);
 672 }
 673
 674 static void __init omap_3430sdp_map_io(void)
 675 {
 676         omap2_set_globals_343x();
 677         omap2_map_common_io();
 678 }
 679
 680 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 681         /* Maintainer: Syed Khasim - Texas Instruments Inc */
 682         .phys_io        = 0x48000000,
 683         .io_pg_offst    = ((0xfa000000) >> 18) & 0xfffc,
 684         .boot_params    = 0x80000100,
 685         .map_io         = omap_3430sdp_map_io,
 686         .init_irq       = omap_3430sdp_init_irq,
 687         .init_machine   = omap_3430sdp_init,
 688         .timer          = &omap_timer,
 689 MACHINE_END