arch/arm/mach-omap2/board-3430sdp.c

   1 /*
   2  * linux/arch/arm/mach-omap2/board-3430sdp.c
   3  *
   4  * Copyright (C) 2007 Texas Instruments
   5  *
   6  * Modified from mach-omap2/board-generic.c
   7  *
   8  * Initial code: Syed Mohammed Khasim
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/delay.h>
  19 #include <linux/input.h>
  20 #include <linux/input/matrix_keypad.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/spi/ads7846.h>
  23 #include <linux/i2c/twl.h>
  24 #include <linux/regulator/machine.h>
  25 #include <linux/io.h>
  26 #include <linux/gpio.h>
  27 #include <linux/mmc/host.h>
  28
  29 #include <mach/hardware.h>
  30 #include <asm/mach-types.h>
  31 #include <asm/mach/arch.h>
  32 #include <asm/mach/map.h>
  33
  34 #include <plat/mcspi.h>
  35 #include <plat/board.h>
  36 #include <plat/usb.h>
  37 #include <plat/common.h>
  38 #include <plat/dma.h>
  39 #include <plat/gpmc.h>
  40 #include <plat/display.h>
  41 #include <plat/panel-generic-dpi.h>
  42
  43 #include <plat/gpmc-smc91x.h>
  44
  45 #include "board-flash.h"
  46 #include "mux.h"
  47 #include "sdram-qimonda-hyb18m512160af-6.h"
  48 #include "hsmmc.h"
  49 #include "pm.h"
  50 #include "control.h"
  51
  52 #define CONFIG_DISABLE_HFCLK 1
  53
  54 #define SDP3430_TS_GPIO_IRQ_SDPV1       3
  55 #define SDP3430_TS_GPIO_IRQ_SDPV2       2
  56
  57 #define ENABLE_VAUX3_DEDICATED  0x03
  58 #define ENABLE_VAUX3_DEV_GRP    0x20
  59
  60 #define TWL4030_MSECURE_GPIO 22
  61
  62 /* FIXME: These values need to be updated based on more profiling on 3430sdp*/
  63 static struct cpuidle_params omap3_cpuidle_params_table[] = {
  64         /* C1 */
  65         {1, 2, 2, 5},
  66         /* C2 */
  67         {1, 10, 10, 30},
  68         /* C3 */
  69         {1, 50, 50, 300},
  70         /* C4 */
  71         {1, 1500, 1800, 4000},
  72         /* C5 */
  73         {1, 2500, 7500, 12000},
  74         /* C6 */
  75         {1, 3000, 8500, 15000},
  76         /* C7 */
  77         {1, 10000, 30000, 300000},
  78 };
  79
  80 static uint32_t board_keymap[] = {
  81         KEY(0, 0, KEY_LEFT),
  82         KEY(0, 1, KEY_RIGHT),
  83         KEY(0, 2, KEY_A),
  84         KEY(0, 3, KEY_B),
  85         KEY(0, 4, KEY_C),
  86         KEY(1, 0, KEY_DOWN),
  87         KEY(1, 1, KEY_UP),
  88         KEY(1, 2, KEY_E),
  89         KEY(1, 3, KEY_F),
  90         KEY(1, 4, KEY_G),
  91         KEY(2, 0, KEY_ENTER),
  92         KEY(2, 1, KEY_I),
  93         KEY(2, 2, KEY_J),
  94         KEY(2, 3, KEY_K),
  95         KEY(2, 4, KEY_3),
  96         KEY(3, 0, KEY_M),
  97         KEY(3, 1, KEY_N),
  98         KEY(3, 2, KEY_O),
  99         KEY(3, 3, KEY_P),
 100         KEY(3, 4, KEY_Q),
 101         KEY(4, 0, KEY_R),
 102         KEY(4, 1, KEY_4),
 103         KEY(4, 2, KEY_T),
 104         KEY(4, 3, KEY_U),
 105         KEY(4, 4, KEY_D),
 106         KEY(5, 0, KEY_V),
 107         KEY(5, 1, KEY_W),
 108         KEY(5, 2, KEY_L),
 109         KEY(5, 3, KEY_S),
 110         KEY(5, 4, KEY_H),
 111         0
 112 };
 113
 114 static struct matrix_keymap_data board_map_data = {
 115         .keymap                 = board_keymap,
 116         .keymap_size            = ARRAY_SIZE(board_keymap),
 117 };
 118
 119 static struct twl4030_keypad_data sdp3430_kp_data = {
 120         .keymap_data    = &board_map_data,
 121         .rows           = 5,
 122         .cols           = 6,
 123         .rep            = 1,
 124 };
 125
 126 static int ts_gpio;     /* Needed for ads7846_get_pendown_state */
 127
 128 /**
 129  * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
 130  *
 131  * @return - void. If request gpio fails then Flag KERN_ERR.
 132  */
 133 static void ads7846_dev_init(void)
 134 {
 135         if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) {
 136                 printk(KERN_ERR "can't get ads746 pen down GPIO\n");
 137                 return;
 138         }
 139
 140         gpio_direction_input(ts_gpio);
 141         gpio_set_debounce(ts_gpio, 310);
 142 }
 143
 144 static int ads7846_get_pendown_state(void)
 145 {
 146         return !gpio_get_value(ts_gpio);
 147 }
 148
 149 static struct ads7846_platform_data tsc2046_config __initdata = {
 150         .get_pendown_state      = ads7846_get_pendown_state,
 151         .keep_vref_on           = 1,
 152         .wakeup                         = true,
 153 };
 154
 155
 156 static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
 157         .turbo_mode     = 0,
 158         .single_channel = 1,    /* 0: slave, 1: master */
 159 };
 160
 161 static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
 162         [0] = {
 163                 /*
 164                  * TSC2046 operates at a max freqency of 2MHz, so
 165                  * operate slightly below at 1.5MHz
 166                  */
 167                 .modalias               = "ads7846",
 168                 .bus_num                = 1,
 169                 .chip_select            = 0,
 170                 .max_speed_hz           = 1500000,
 171                 .controller_data        = &tsc2046_mcspi_config,
 172                 .irq                    = 0,
 173                 .platform_data          = &tsc2046_config,
 174         },
 175 };
 176
 177
 178 #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO        8
 179 #define SDP3430_LCD_PANEL_ENABLE_GPIO           5
 180
 181 static unsigned backlight_gpio;
 182 static unsigned enable_gpio;
 183 static int lcd_enabled;
 184 static int dvi_enabled;
 185
 186 static void __init sdp3430_display_init(void)
 187 {
 188         int r;
 189
 190         enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
 191         backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
 192
 193         r = gpio_request(enable_gpio, "LCD reset");
 194         if (r) {
 195                 printk(KERN_ERR "failed to get LCD reset GPIO\n");
 196                 goto err0;
 197         }
 198
 199         r = gpio_request(backlight_gpio, "LCD Backlight");
 200         if (r) {
 201                 printk(KERN_ERR "failed to get LCD backlight GPIO\n");
 202                 goto err1;
 203         }
 204
 205         gpio_direction_output(enable_gpio, 0);
 206         gpio_direction_output(backlight_gpio, 0);
 207
 208         return;
 209 err1:
 210         gpio_free(enable_gpio);
 211 err0:
 212         return;
 213 }
 214
 215 static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
 216 {
 217         if (dvi_enabled) {
 218                 printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
 219                 return -EINVAL;
 220         }
 221
 222         gpio_direction_output(enable_gpio, 1);
 223         gpio_direction_output(backlight_gpio, 1);
 224
 225         lcd_enabled = 1;
 226
 227         return 0;
 228 }
 229
 230 static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
 231 {
 232         lcd_enabled = 0;
 233
 234         gpio_direction_output(enable_gpio, 0);
 235         gpio_direction_output(backlight_gpio, 0);
 236 }
 237
 238 static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
 239 {
 240         if (lcd_enabled) {
 241                 printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
 242                 return -EINVAL;
 243         }
 244
 245         dvi_enabled = 1;
 246
 247         return 0;
 248 }
 249
 250 static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
 251 {
 252         dvi_enabled = 0;
 253 }
 254
 255 static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
 256 {
 257         return 0;
 258 }
 259
 260 static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
 261 {
 262 }
 263
 264
 265 static struct omap_dss_device sdp3430_lcd_device = {
 266         .name                   = "lcd",
 267         .driver_name            = "sharp_ls_panel",
 268         .type                   = OMAP_DISPLAY_TYPE_DPI,
 269         .phy.dpi.data_lines     = 16,
 270         .platform_enable        = sdp3430_panel_enable_lcd,
 271         .platform_disable       = sdp3430_panel_disable_lcd,
 272 };
 273
 274 static struct panel_generic_dpi_data dvi_panel = {
 275         .name                   = "generic",
 276         .platform_enable        = sdp3430_panel_enable_dvi,
 277         .platform_disable       = sdp3430_panel_disable_dvi,
 278 };
 279
 280 static struct omap_dss_device sdp3430_dvi_device = {
 281         .name                   = "dvi",
 282         .type                   = OMAP_DISPLAY_TYPE_DPI,
 283         .driver_name            = "generic_dpi_panel",
 284         .data                   = &dvi_panel,
 285         .phy.dpi.data_lines     = 24,
 286 };
 287
 288 static struct omap_dss_device sdp3430_tv_device = {
 289         .name                   = "tv",
 290         .driver_name            = "venc",
 291         .type                   = OMAP_DISPLAY_TYPE_VENC,
 292         .phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
 293         .platform_enable        = sdp3430_panel_enable_tv,
 294         .platform_disable       = sdp3430_panel_disable_tv,
 295 };
 296
 297
 298 static struct omap_dss_device *sdp3430_dss_devices[] = {
 299         &sdp3430_lcd_device,
 300         &sdp3430_dvi_device,
 301         &sdp3430_tv_device,
 302 };
 303
 304 static struct omap_dss_board_info sdp3430_dss_data = {
 305         .num_devices    = ARRAY_SIZE(sdp3430_dss_devices),
 306         .devices        = sdp3430_dss_devices,
 307         .default_device = &sdp3430_lcd_device,
 308 };
 309
 310 static struct platform_device sdp3430_dss_device = {
 311         .name           = "omapdss",
 312         .id             = -1,
 313         .dev            = {
 314                 .platform_data = &sdp3430_dss_data,
 315         },
 316 };
 317
 318 static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
 319         .supply         = "vdda_dac",
 320         .dev            = &sdp3430_dss_device.dev,
 321 };
 322
 323 static struct platform_device *sdp3430_devices[] __initdata = {
 324         &sdp3430_dss_device,
 325 };
 326
 327 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 328 };
 329
 330 static void __init omap_3430sdp_init_early(void)
 331 {
 332         omap_board_config = sdp3430_config;
 333         omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 334         omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 335         omap2_init_common_infrastructure();
 336         omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
 337 }
 338
 339 static int sdp3430_batt_table[] = {
 340 /* 0 C*/
 341 30800, 29500, 28300, 27100,
 342 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
 343 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
 344 11600, 11200, 10800, 10400, 10000, 9630,   9280,   8950,   8620,   8310,
 345 8020,   7730,   7460,   7200,   6950,   6710,   6470,   6250,   6040,   5830,
 346 5640,   5450,   5260,   5090,   4920,   4760,   4600,   4450,   4310,   4170,
 347 4040,   3910,   3790,   3670,   3550
 348 };
 349
 350 static struct twl4030_bci_platform_data sdp3430_bci_data = {
 351         .battery_tmp_tbl        = sdp3430_batt_table,
 352         .tblsize                = ARRAY_SIZE(sdp3430_batt_table),
 353 };
 354
 355 static struct omap2_hsmmc_info mmc[] = {
 356         {
 357                 .mmc            = 1,
 358                 /* 8 bits (default) requires S6.3 == ON,
 359                  * so the SIM card isn't used; else 4 bits.
 360                  */
 361                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 362                 .gpio_wp        = 4,
 363         },
 364         {
 365                 .mmc            = 2,
 366                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 367                 .gpio_wp        = 7,
 368         },
 369         {}      /* Terminator */
 370 };
 371
 372 static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
 373         .supply                 = "vmmc",
 374 };
 375
 376 static struct regulator_consumer_supply sdp3430_vsim_supply = {
 377         .supply                 = "vmmc_aux",
 378 };
 379
 380 static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
 381         .supply                 = "vmmc",
 382 };
 383
 384 static int sdp3430_twl_gpio_setup(struct device *dev,
 385                 unsigned gpio, unsigned ngpio)
 386 {
 387         /* gpio + 0 is "mmc0_cd" (input/IRQ),
 388          * gpio + 1 is "mmc1_cd" (input/IRQ)
 389          */
 390         mmc[0].gpio_cd = gpio + 0;
 391         mmc[1].gpio_cd = gpio + 1;
 392         omap2_hsmmc_init(mmc);
 393
 394         /* link regulators to MMC adapters ... we "know" the
 395          * regulators will be set up only *after* we return.
 396          */
 397         sdp3430_vmmc1_supply.dev = mmc[0].dev;
 398         sdp3430_vsim_supply.dev = mmc[0].dev;
 399         sdp3430_vmmc2_supply.dev = mmc[1].dev;
 400
 401         /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 402         gpio_request(gpio + 7, "sub_lcd_en_bkl");
 403         gpio_direction_output(gpio + 7, 0);
 404
 405         /* gpio + 15 is "sub_lcd_nRST" (output) */
 406         gpio_request(gpio + 15, "sub_lcd_nRST");
 407         gpio_direction_output(gpio + 15, 0);
 408
 409         return 0;
 410 }
 411
 412 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
 413         .gpio_base      = OMAP_MAX_GPIO_LINES,
 414         .irq_base       = TWL4030_GPIO_IRQ_BASE,
 415         .irq_end        = TWL4030_GPIO_IRQ_END,
 416         .pulldowns      = BIT(2) | BIT(6) | BIT(8) | BIT(13)
 417                                 | BIT(16) | BIT(17),
 418         .setup          = sdp3430_twl_gpio_setup,
 419 };
 420
 421 static struct twl4030_usb_data sdp3430_usb_data = {
 422         .usb_mode       = T2_USB_MODE_ULPI,
 423 };
 424
 425 static struct twl4030_madc_platform_data sdp3430_madc_data = {
 426         .irq_line       = 1,
 427 };
 428
 429 /*
 430  * Apply all the fixed voltages since most versions of U-Boot
 431  * don't bother with that initialization.
 432  */
 433
 434 /* VAUX1 for mainboard (irda and sub-lcd) */
 435 static struct regulator_init_data sdp3430_vaux1 = {
 436         .constraints = {
 437                 .min_uV                 = 2800000,
 438                 .max_uV                 = 2800000,
 439                 .apply_uV               = true,
 440                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 441                                         | REGULATOR_MODE_STANDBY,
 442                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 443                                         | REGULATOR_CHANGE_STATUS,
 444         },
 445 };
 446
 447 /* VAUX2 for camera module */
 448 static struct regulator_init_data sdp3430_vaux2 = {
 449         .constraints = {
 450                 .min_uV                 = 2800000,
 451                 .max_uV                 = 2800000,
 452                 .apply_uV               = true,
 453                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 454                                         | REGULATOR_MODE_STANDBY,
 455                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 456                                         | REGULATOR_CHANGE_STATUS,
 457         },
 458 };
 459
 460 /* VAUX3 for LCD board */
 461 static struct regulator_init_data sdp3430_vaux3 = {
 462         .constraints = {
 463                 .min_uV                 = 2800000,
 464                 .max_uV                 = 2800000,
 465                 .apply_uV               = true,
 466                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 467                                         | REGULATOR_MODE_STANDBY,
 468                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 469                                         | REGULATOR_CHANGE_STATUS,
 470         },
 471 };
 472
 473 /* VAUX4 for OMAP VDD_CSI2 (camera) */
 474 static struct regulator_init_data sdp3430_vaux4 = {
 475         .constraints = {
 476                 .min_uV                 = 1800000,
 477                 .max_uV                 = 1800000,
 478                 .apply_uV               = true,
 479                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 480                                         | REGULATOR_MODE_STANDBY,
 481                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 482                                         | REGULATOR_CHANGE_STATUS,
 483         },
 484 };
 485
 486 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 487 static struct regulator_init_data sdp3430_vmmc1 = {
 488         .constraints = {
 489                 .min_uV                 = 1850000,
 490                 .max_uV                 = 3150000,
 491                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 492                                         | REGULATOR_MODE_STANDBY,
 493                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 494                                         | REGULATOR_CHANGE_MODE
 495                                         | REGULATOR_CHANGE_STATUS,
 496         },
 497         .num_consumer_supplies  = 1,
 498         .consumer_supplies      = &sdp3430_vmmc1_supply,
 499 };
 500
 501 /* VMMC2 for MMC2 card */
 502 static struct regulator_init_data sdp3430_vmmc2 = {
 503         .constraints = {
 504                 .min_uV                 = 1850000,
 505                 .max_uV                 = 1850000,
 506                 .apply_uV               = true,
 507                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 508                                         | REGULATOR_MODE_STANDBY,
 509                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 510                                         | REGULATOR_CHANGE_STATUS,
 511         },
 512         .num_consumer_supplies  = 1,
 513         .consumer_supplies      = &sdp3430_vmmc2_supply,
 514 };
 515
 516 /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
 517 static struct regulator_init_data sdp3430_vsim = {
 518         .constraints = {
 519                 .min_uV                 = 1800000,
 520                 .max_uV                 = 3000000,
 521                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 522                                         | REGULATOR_MODE_STANDBY,
 523                 .valid_ops_mask         = REGULATOR_CHANGE_VOLTAGE
 524                                         | REGULATOR_CHANGE_MODE
 525                                         | REGULATOR_CHANGE_STATUS,
 526         },
 527         .num_consumer_supplies  = 1,
 528         .consumer_supplies      = &sdp3430_vsim_supply,
 529 };
 530
 531 /* VDAC for DSS driving S-Video */
 532 static struct regulator_init_data sdp3430_vdac = {
 533         .constraints = {
 534                 .min_uV                 = 1800000,
 535                 .max_uV                 = 1800000,
 536                 .apply_uV               = true,
 537                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 538                                         | REGULATOR_MODE_STANDBY,
 539                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 540                                         | REGULATOR_CHANGE_STATUS,
 541         },
 542         .num_consumer_supplies  = 1,
 543         .consumer_supplies      = &sdp3430_vdda_dac_supply,
 544 };
 545
 546 /* VPLL2 for digital video outputs */
 547 static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
 548         {
 549                 .supply         = "vdds_dsi",
 550                 .dev            = &sdp3430_dss_device.dev,
 551         }
 552 };
 553
 554 static struct regulator_init_data sdp3430_vpll2 = {
 555         .constraints = {
 556                 .name                   = "VDVI",
 557                 .min_uV                 = 1800000,
 558                 .max_uV                 = 1800000,
 559                 .apply_uV               = true,
 560                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 561                                         | REGULATOR_MODE_STANDBY,
 562                 .valid_ops_mask         = REGULATOR_CHANGE_MODE
 563                                         | REGULATOR_CHANGE_STATUS,
 564         },
 565         .num_consumer_supplies  = ARRAY_SIZE(sdp3430_vpll2_supplies),
 566         .consumer_supplies      = sdp3430_vpll2_supplies,
 567 };
 568
 569 static struct twl4030_codec_audio_data sdp3430_audio = {
 570         .audio_mclk = 26000000,
 571 };
 572
 573 static struct twl4030_codec_data sdp3430_codec = {
 574         .audio_mclk = 26000000,
 575         .audio = &sdp3430_audio,
 576 };
 577
 578 static struct twl4030_platform_data sdp3430_twldata = {
 579         .irq_base       = TWL4030_IRQ_BASE,
 580         .irq_end        = TWL4030_IRQ_END,
 581
 582         /* platform_data for children goes here */
 583         .bci            = &sdp3430_bci_data,
 584         .gpio           = &sdp3430_gpio_data,
 585         .madc           = &sdp3430_madc_data,
 586         .keypad         = &sdp3430_kp_data,
 587         .usb            = &sdp3430_usb_data,
 588         .codec          = &sdp3430_codec,
 589
 590         .vaux1          = &sdp3430_vaux1,
 591         .vaux2          = &sdp3430_vaux2,
 592         .vaux3          = &sdp3430_vaux3,
 593         .vaux4          = &sdp3430_vaux4,
 594         .vmmc1          = &sdp3430_vmmc1,
 595         .vmmc2          = &sdp3430_vmmc2,
 596         .vsim           = &sdp3430_vsim,
 597         .vdac           = &sdp3430_vdac,
 598         .vpll2          = &sdp3430_vpll2,
 599 };
 600
 601 static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
 602         {
 603                 I2C_BOARD_INFO("twl4030", 0x48),
 604                 .flags = I2C_CLIENT_WAKE,
 605                 .irq = INT_34XX_SYS_NIRQ,
 606                 .platform_data = &sdp3430_twldata,
 607         },
 608 };
 609
 610 static int __init omap3430_i2c_init(void)
 611 {
 612         /* i2c1 for PMIC only */
 613         omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo,
 614                         ARRAY_SIZE(sdp3430_i2c_boardinfo));
 615         /* i2c2 on camera connector (for sensor control) and optional isp1301 */
 616         omap_register_i2c_bus(2, 400, NULL, 0);
 617         /* i2c3 on display connector (for DVI, tfp410) */
 618         omap_register_i2c_bus(3, 400, NULL, 0);
 619         return 0;
 620 }
 621
 622 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 623
 624 static struct omap_smc91x_platform_data board_smc91x_data = {
 625         .cs             = 3,
 626         .flags          = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
 627                                 IORESOURCE_IRQ_LOWLEVEL,
 628 };
 629
 630 static void __init board_smc91x_init(void)
 631 {
 632         if (omap_rev() > OMAP3430_REV_ES1_0)
 633                 board_smc91x_data.gpio_irq = 6;
 634         else
 635                 board_smc91x_data.gpio_irq = 29;
 636
 637         gpmc_smc91x_init(&board_smc91x_data);
 638 }
 639
 640 #else
 641
 642 static inline void board_smc91x_init(void)
 643 {
 644 }
 645
 646 #endif
 647
 648 static void enable_board_wakeup_source(void)
 649 {
 650         /* T2 interrupt line (keypad) */
 651         omap_mux_init_signal("sys_nirq",
 652                 OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 653 }
 654
 655 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 656
 657         .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 658         .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
 659         .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 660
 661         .phy_reset  = true,
 662         .reset_gpio_port[0]  = 57,
 663         .reset_gpio_port[1]  = 61,
 664         .reset_gpio_port[2]  = -EINVAL
 665 };
 666
 667 #ifdef CONFIG_OMAP_MUX
 668 static struct omap_board_mux board_mux[] __initdata = {
 669         { .reg_offset = OMAP_MUX_TERMINATOR },
 670 };
 671 #endif
 672
 673 /*
 674  * SDP3430 V2 Board CS organization
 675  * Different from SDP3430 V1. Now 4 switches used to specify CS
 676  *
 677  * See also the Switch S8 settings in the comments.
 678  */
 679 static char chip_sel_3430[][GPMC_CS_NUM] = {
 680         {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
 681         {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
 682         {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
 683 };
 684
 685 static struct mtd_partition sdp_nor_partitions[] = {
 686         /* bootloader (U-Boot, etc) in first sector */
 687         {
 688                 .name           = "Bootloader-NOR",
 689                 .offset         = 0,
 690                 .size           = SZ_256K,
 691                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 692         },
 693         /* bootloader params in the next sector */
 694         {
 695                 .name           = "Params-NOR",
 696                 .offset         = MTDPART_OFS_APPEND,
 697                 .size           = SZ_256K,
 698                 .mask_flags     = 0,
 699         },
 700         /* kernel */
 701         {
 702                 .name           = "Kernel-NOR",
 703                 .offset         = MTDPART_OFS_APPEND,
 704                 .size           = SZ_2M,
 705                 .mask_flags     = 0
 706         },
 707         /* file system */
 708         {
 709                 .name           = "Filesystem-NOR",
 710                 .offset         = MTDPART_OFS_APPEND,
 711                 .size           = MTDPART_SIZ_FULL,
 712                 .mask_flags     = 0
 713         }
 714 };
 715
 716 static struct mtd_partition sdp_onenand_partitions[] = {
 717         {
 718                 .name           = "X-Loader-OneNAND",
 719                 .offset         = 0,
 720                 .size           = 4 * (64 * 2048),
 721                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
 722         },
 723         {
 724                 .name           = "U-Boot-OneNAND",
 725                 .offset         = MTDPART_OFS_APPEND,
 726                 .size           = 2 * (64 * 2048),
 727                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
 728         },
 729         {
 730                 .name           = "U-Boot Environment-OneNAND",
 731                 .offset         = MTDPART_OFS_APPEND,
 732                 .size           = 1 * (64 * 2048),
 733         },
 734         {
 735                 .name           = "Kernel-OneNAND",
 736                 .offset         = MTDPART_OFS_APPEND,
 737                 .size           = 16 * (64 * 2048),
 738         },
 739         {
 740                 .name           = "File System-OneNAND",
 741                 .offset         = MTDPART_OFS_APPEND,
 742                 .size           = MTDPART_SIZ_FULL,
 743         },
 744 };
 745
 746 static struct mtd_partition sdp_nand_partitions[] = {
 747         /* All the partition sizes are listed in terms of NAND block size */
 748         {
 749                 .name           = "X-Loader-NAND",
 750                 .offset         = 0,
 751                 .size           = 4 * (64 * 2048),
 752                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 753         },
 754         {
 755                 .name           = "U-Boot-NAND",
 756                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x80000 */
 757                 .size           = 10 * (64 * 2048),
 758                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 759         },
 760         {
 761                 .name           = "Boot Env-NAND",
 762
 763                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
 764                 .size           = 6 * (64 * 2048),
 765         },
 766         {
 767                 .name           = "Kernel-NAND",
 768                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x280000 */
 769                 .size           = 40 * (64 * 2048),
 770         },
 771         {
 772                 .name           = "File System - NAND",
 773                 .size           = MTDPART_SIZ_FULL,
 774                 .offset         = MTDPART_OFS_APPEND,   /* Offset = 0x780000 */
 775         },
 776 };
 777
 778 static struct flash_partitions sdp_flash_partitions[] = {
 779         {
 780                 .parts = sdp_nor_partitions,
 781                 .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
 782         },
 783         {
 784                 .parts = sdp_onenand_partitions,
 785                 .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
 786         },
 787         {
 788                 .parts = sdp_nand_partitions,
 789                 .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
 790         },
 791 };
 792
 793 static struct omap_musb_board_data musb_board_data = {
 794         .interface_type         = MUSB_INTERFACE_ULPI,
 795         .mode                   = MUSB_OTG,
 796         .power                  = 100,
 797 };
 798
 799 static void __init omap_3430sdp_init(void)
 800 {
 801         omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 802         omap3430_i2c_init();
 803         platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
 804         if (omap_rev() > OMAP3430_REV_ES1_0)
 805                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
 806         else
 807                 ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
 808         sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
 809         spi_register_board_info(sdp3430_spi_board_info,
 810                                 ARRAY_SIZE(sdp3430_spi_board_info));
 811         ads7846_dev_init();
 812         omap_serial_init();
 813         usb_musb_init(&musb_board_data);
 814         board_smc91x_init();
 815         board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
 816         sdp3430_display_init();
 817         enable_board_wakeup_source();
 818         usb_ehci_init(&ehci_pdata);
 819 }
 820
 821 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 822         /* Maintainer: Syed Khasim - Texas Instruments Inc */
 823         .boot_params    = 0x80000100,
 824         .reserve        = omap_reserve,
 825         .map_io         = omap3_map_io,
 826         .init_early     = omap_3430sdp_init_early,
 827         .init_irq       = omap_init_irq,
 828         .init_machine   = omap_3430sdp_init,
 829         .timer          = &omap_timer,
 830 MACHINE_END