arch/arm/mach-omap1/board-generic.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-generic.c
   3  *
   4  * Modified from board-innovator1510.c
   5  *
   6  * Code for generic OMAP board. Should work on many OMAP systems where
   7  * the device drivers take care of all the necessary hardware initialization.
   8  * Do not put any board specific code to this file; create a new machine
   9  * type if you need custom low-level initializations.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/kernel.h>
  17 #include <linux/init.h>
  18 #include <linux/platform_device.h>
  19
  20 #include <mach/hardware.h>
  21 #include <asm/mach-types.h>
  22 #include <asm/mach/arch.h>
  23 #include <asm/mach/map.h>
  24
  25 #include <mach/gpio.h>
  26 #include <mach/mux.h>
  27 #include <mach/usb.h>
  28 #include <mach/board.h>
  29 #include <mach/common.h>
  30
  31 static void __init omap_generic_init_irq(void)
  32 {
  33         omap1_init_common_hw();
  34         omap_init_irq();
  35 }
  36
  37 /* assume no Mini-AB port */
  38
  39 #ifdef CONFIG_ARCH_OMAP15XX
  40 static struct omap_usb_config generic1510_usb_config __initdata = {
  41         .register_host  = 1,
  42         .register_dev   = 1,
  43         .hmc_mode       = 16,
  44         .pins[0]        = 3,
  45 };
  46 #endif
  47
  48 #if defined(CONFIG_ARCH_OMAP16XX)
  49 static struct omap_usb_config generic1610_usb_config __initdata = {
  50 #ifdef CONFIG_USB_OTG
  51         .otg            = 1,
  52 #endif
  53         .register_host  = 1,
  54         .register_dev   = 1,
  55         .hmc_mode       = 16,
  56         .pins[0]        = 6,
  57 };
  58 #endif
  59
  60 static struct omap_uart_config generic_uart_config __initdata = {
  61         .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
  62 };
  63
  64 static struct omap_board_config_kernel generic_config[] __initdata = {
  65         { OMAP_TAG_USB,         NULL },
  66         { OMAP_TAG_UART,        &generic_uart_config },
  67 };
  68
  69 static void __init omap_generic_init(void)
  70 {
  71 #ifdef CONFIG_ARCH_OMAP15XX
  72         if (cpu_is_omap15xx()) {
  73                 generic_config[0].data = &generic1510_usb_config;
  74         }
  75 #endif
  76 #if defined(CONFIG_ARCH_OMAP16XX)
  77         if (!cpu_is_omap1510()) {
  78                 generic_config[0].data = &generic1610_usb_config;
  79         }
  80 #endif
  81
  82         omap_board_config = generic_config;
  83         omap_board_config_size = ARRAY_SIZE(generic_config);
  84         omap_serial_init();
  85         omap_register_i2c_bus(1, 100, NULL, 0);
  86 }
  87
  88 static void __init omap_generic_map_io(void)
  89 {
  90         omap1_map_common_io();
  91 }
  92
  93 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
  94         /* Maintainer: Tony Lindgren <tony@atomide.com> */
  95         .phys_io        = 0xfff00000,
  96         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
  97         .boot_params    = 0x10000100,
  98         .map_io         = omap_generic_map_io,
  99         .init_irq       = omap_generic_init_irq,
 100         .init_machine   = omap_generic_init,
 101         .timer          = &omap_timer,
 102 MACHINE_END