1 /* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
3 * This program is free software; you can redistribute it and/or modify
4 * it under the terms of the GNU General Public License version 2 and
5 * only version 2 as published by the Free Software Foundation.
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
18 #include <linux/kernel.h>
19 #include <linux/irq.h>
20 #include <linux/gpio.h>
21 #include <linux/platform_device.h>
22 #include <linux/delay.h>
24 #include <linux/smsc911x.h>
25 #include <linux/usb/msm_hsusb.h>
26 #include <linux/clkdev.h>
27 #include <linux/memblock.h>
29 #include <asm/mach-types.h>
30 #include <asm/mach/arch.h>
31 #include <asm/memory.h>
32 #include <asm/setup.h>
34 #include <mach/gpio.h>
35 #include <mach/board.h>
36 #include <mach/msm_iomap.h>
39 #include <mach/vreg.h>
42 #include "proc_comm.h"
44 extern struct sys_timer msm_timer;
46 static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
47 char **cmdline, struct meminfo *mi)
49 for (; tag->hdr.size; tag = tag_next(tag))
50 if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
52 tag->u.mem.size += SZ_2M;
56 static void __init msm7x30_reserve(void)
58 memblock_remove(0x0, SZ_2M);
61 static int hsusb_phy_init_seq[] = {
62 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
63 0x02, 0x36, /* Disable CDR Auto Reset feature */
67 static struct msm_otg_platform_data msm_otg_pdata = {
68 .phy_init_seq = hsusb_phy_init_seq,
69 .mode = USB_PERIPHERAL,
70 .otg_control = OTG_PHY_CONTROL,
73 struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
74 #ifdef CONFIG_SERIAL_MSM_CONSOLE
75 [49] = { /* UART2 RFR */
76 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
77 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
79 [50] = { /* UART2 CTS */
80 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
81 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
83 [51] = { /* UART2 RX */
84 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
85 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
87 [52] = { /* UART2 TX */
88 .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
89 GPIOMUX_FUNC_2 | GPIOMUX_VALID,
94 static struct platform_device *devices[] __initdata = {
95 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
101 &msm_device_hsusb_host,
104 static void __init msm7x30_init_irq(void)
109 static void __init msm7x30_init(void)
111 msm_device_otg.dev.platform_data = &msm_otg_pdata;
112 msm_device_hsusb.dev.parent = &msm_device_otg.dev;
113 msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
115 platform_add_devices(devices, ARRAY_SIZE(devices));
118 static void __init msm7x30_map_io(void)
120 msm_map_msm7x30_io();
121 msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
124 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
125 .boot_params = PLAT_PHYS_OFFSET + 0x100,
126 .fixup = msm7x30_fixup,
127 .reserve = msm7x30_reserve,
128 .map_io = msm7x30_map_io,
129 .init_irq = msm7x30_init_irq,
130 .init_machine = msm7x30_init,
134 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
135 .boot_params = PLAT_PHYS_OFFSET + 0x100,
136 .fixup = msm7x30_fixup,
137 .reserve = msm7x30_reserve,
138 .map_io = msm7x30_map_io,
139 .init_irq = msm7x30_init_irq,
140 .init_machine = msm7x30_init,
144 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
145 .boot_params = PLAT_PHYS_OFFSET + 0x100,
146 .fixup = msm7x30_fixup,
147 .reserve = msm7x30_reserve,
148 .map_io = msm7x30_map_io,
149 .init_irq = msm7x30_init_irq,
150 .init_machine = msm7x30_init,