arch/arm/mach-at91/at91sam9260_devices.c

   1 /*
   2  * arch/arm/mach-at91/at91sam9260_devices.c
   3  *
   4  *  Copyright (C) 2006 Atmel
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  */
  12 #include <asm/mach/arch.h>
  13 #include <asm/mach/map.h>
  14
  15 #include <linux/dma-mapping.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/i2c-gpio.h>
  18
  19 #include <mach/board.h>
  20 #include <mach/gpio.h>
  21 #include <mach/cpu.h>
  22 #include <mach/at91sam9260.h>
  23 #include <mach/at91sam9260_matrix.h>
  24 #include <mach/at91sam9_smc.h>
  25
  26 #include "generic.h"
  27
  28
  29 /* --------------------------------------------------------------------
  30  *  USB Host
  31  * -------------------------------------------------------------------- */
  32
  33 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
  34 static u64 ohci_dmamask = DMA_BIT_MASK(32);
  35 static struct at91_usbh_data usbh_data;
  36
  37 static struct resource usbh_resources[] = {
  38         [0] = {
  39                 .start  = AT91SAM9260_UHP_BASE,
  40                 .end    = AT91SAM9260_UHP_BASE + SZ_1M - 1,
  41                 .flags  = IORESOURCE_MEM,
  42         },
  43         [1] = {
  44                 .start  = AT91SAM9260_ID_UHP,
  45                 .end    = AT91SAM9260_ID_UHP,
  46                 .flags  = IORESOURCE_IRQ,
  47         },
  48 };
  49
  50 static struct platform_device at91_usbh_device = {
  51         .name           = "at91_ohci",
  52         .id             = -1,
  53         .dev            = {
  54                                 .dma_mask               = &ohci_dmamask,
  55                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
  56                                 .platform_data          = &usbh_data,
  57         },
  58         .resource       = usbh_resources,
  59         .num_resources  = ARRAY_SIZE(usbh_resources),
  60 };
  61
  62 void __init at91_add_device_usbh(struct at91_usbh_data *data)
  63 {
  64         if (!data)
  65                 return;
  66
  67         usbh_data = *data;
  68         platform_device_register(&at91_usbh_device);
  69 }
  70 #else
  71 void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  72 #endif
  73
  74
  75 /* --------------------------------------------------------------------
  76  *  USB Device (Gadget)
  77  * -------------------------------------------------------------------- */
  78
  79 #ifdef CONFIG_USB_GADGET_AT91
  80 static struct at91_udc_data udc_data;
  81
  82 static struct resource udc_resources[] = {
  83         [0] = {
  84                 .start  = AT91SAM9260_BASE_UDP,
  85                 .end    = AT91SAM9260_BASE_UDP + SZ_16K - 1,
  86                 .flags  = IORESOURCE_MEM,
  87         },
  88         [1] = {
  89                 .start  = AT91SAM9260_ID_UDP,
  90                 .end    = AT91SAM9260_ID_UDP,
  91                 .flags  = IORESOURCE_IRQ,
  92         },
  93 };
  94
  95 static struct platform_device at91_udc_device = {
  96         .name           = "at91_udc",
  97         .id             = -1,
  98         .dev            = {
  99                                 .platform_data          = &udc_data,
 100         },
 101         .resource       = udc_resources,
 102         .num_resources  = ARRAY_SIZE(udc_resources),
 103 };
 104
 105 void __init at91_add_device_udc(struct at91_udc_data *data)
 106 {
 107         if (!data)
 108                 return;
 109
 110         if (data->vbus_pin) {
 111                 at91_set_gpio_input(data->vbus_pin, 0);
 112                 at91_set_deglitch(data->vbus_pin, 1);
 113         }
 114
 115         /* Pullup pin is handled internally by USB device peripheral */
 116
 117         udc_data = *data;
 118         platform_device_register(&at91_udc_device);
 119 }
 120 #else
 121 void __init at91_add_device_udc(struct at91_udc_data *data) {}
 122 #endif
 123
 124
 125 /* --------------------------------------------------------------------
 126  *  Ethernet
 127  * -------------------------------------------------------------------- */
 128
 129 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 130 static u64 eth_dmamask = DMA_BIT_MASK(32);
 131 static struct at91_eth_data eth_data;
 132
 133 static struct resource eth_resources[] = {
 134         [0] = {
 135                 .start  = AT91SAM9260_BASE_EMAC,
 136                 .end    = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
 137                 .flags  = IORESOURCE_MEM,
 138         },
 139         [1] = {
 140                 .start  = AT91SAM9260_ID_EMAC,
 141                 .end    = AT91SAM9260_ID_EMAC,
 142                 .flags  = IORESOURCE_IRQ,
 143         },
 144 };
 145
 146 static struct platform_device at91sam9260_eth_device = {
 147         .name           = "macb",
 148         .id             = -1,
 149         .dev            = {
 150                                 .dma_mask               = &eth_dmamask,
 151                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 152                                 .platform_data          = &eth_data,
 153         },
 154         .resource       = eth_resources,
 155         .num_resources  = ARRAY_SIZE(eth_resources),
 156 };
 157
 158 void __init at91_add_device_eth(struct at91_eth_data *data)
 159 {
 160         if (!data)
 161                 return;
 162
 163         if (data->phy_irq_pin) {
 164                 at91_set_gpio_input(data->phy_irq_pin, 0);
 165                 at91_set_deglitch(data->phy_irq_pin, 1);
 166         }
 167
 168         /* Pins used for MII and RMII */
 169         at91_set_A_periph(AT91_PIN_PA19, 0);    /* ETXCK_EREFCK */
 170         at91_set_A_periph(AT91_PIN_PA17, 0);    /* ERXDV */
 171         at91_set_A_periph(AT91_PIN_PA14, 0);    /* ERX0 */
 172         at91_set_A_periph(AT91_PIN_PA15, 0);    /* ERX1 */
 173         at91_set_A_periph(AT91_PIN_PA18, 0);    /* ERXER */
 174         at91_set_A_periph(AT91_PIN_PA16, 0);    /* ETXEN */
 175         at91_set_A_periph(AT91_PIN_PA12, 0);    /* ETX0 */
 176         at91_set_A_periph(AT91_PIN_PA13, 0);    /* ETX1 */
 177         at91_set_A_periph(AT91_PIN_PA21, 0);    /* EMDIO */
 178         at91_set_A_periph(AT91_PIN_PA20, 0);    /* EMDC */
 179
 180         if (!data->is_rmii) {
 181                 at91_set_B_periph(AT91_PIN_PA28, 0);    /* ECRS */
 182                 at91_set_B_periph(AT91_PIN_PA29, 0);    /* ECOL */
 183                 at91_set_B_periph(AT91_PIN_PA25, 0);    /* ERX2 */
 184                 at91_set_B_periph(AT91_PIN_PA26, 0);    /* ERX3 */
 185                 at91_set_B_periph(AT91_PIN_PA27, 0);    /* ERXCK */
 186                 at91_set_B_periph(AT91_PIN_PA23, 0);    /* ETX2 */
 187                 at91_set_B_periph(AT91_PIN_PA24, 0);    /* ETX3 */
 188                 at91_set_B_periph(AT91_PIN_PA22, 0);    /* ETXER */
 189         }
 190
 191         eth_data = *data;
 192         platform_device_register(&at91sam9260_eth_device);
 193 }
 194 #else
 195 void __init at91_add_device_eth(struct at91_eth_data *data) {}
 196 #endif
 197
 198
 199 /* --------------------------------------------------------------------
 200  *  MMC / SD
 201  * -------------------------------------------------------------------- */
 202
 203 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
 204 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 205 static struct at91_mmc_data mmc_data;
 206
 207 static struct resource mmc_resources[] = {
 208         [0] = {
 209                 .start  = AT91SAM9260_BASE_MCI,
 210                 .end    = AT91SAM9260_BASE_MCI + SZ_16K - 1,
 211                 .flags  = IORESOURCE_MEM,
 212         },
 213         [1] = {
 214                 .start  = AT91SAM9260_ID_MCI,
 215                 .end    = AT91SAM9260_ID_MCI,
 216                 .flags  = IORESOURCE_IRQ,
 217         },
 218 };
 219
 220 static struct platform_device at91sam9260_mmc_device = {
 221         .name           = "at91_mci",
 222         .id             = -1,
 223         .dev            = {
 224                                 .dma_mask               = &mmc_dmamask,
 225                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 226                                 .platform_data          = &mmc_data,
 227         },
 228         .resource       = mmc_resources,
 229         .num_resources  = ARRAY_SIZE(mmc_resources),
 230 };
 231
 232 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 233 {
 234         if (!data)
 235                 return;
 236
 237         /* input/irq */
 238         if (data->det_pin) {
 239                 at91_set_gpio_input(data->det_pin, 1);
 240                 at91_set_deglitch(data->det_pin, 1);
 241         }
 242         if (data->wp_pin)
 243                 at91_set_gpio_input(data->wp_pin, 1);
 244         if (data->vcc_pin)
 245                 at91_set_gpio_output(data->vcc_pin, 0);
 246
 247         /* CLK */
 248         at91_set_A_periph(AT91_PIN_PA8, 0);
 249
 250         if (data->slot_b) {
 251                 /* CMD */
 252                 at91_set_B_periph(AT91_PIN_PA1, 1);
 253
 254                 /* DAT0, maybe DAT1..DAT3 */
 255                 at91_set_B_periph(AT91_PIN_PA0, 1);
 256                 if (data->wire4) {
 257                         at91_set_B_periph(AT91_PIN_PA5, 1);
 258                         at91_set_B_periph(AT91_PIN_PA4, 1);
 259                         at91_set_B_periph(AT91_PIN_PA3, 1);
 260                 }
 261         } else {
 262                 /* CMD */
 263                 at91_set_A_periph(AT91_PIN_PA7, 1);
 264
 265                 /* DAT0, maybe DAT1..DAT3 */
 266                 at91_set_A_periph(AT91_PIN_PA6, 1);
 267                 if (data->wire4) {
 268                         at91_set_A_periph(AT91_PIN_PA9, 1);
 269                         at91_set_A_periph(AT91_PIN_PA10, 1);
 270                         at91_set_A_periph(AT91_PIN_PA11, 1);
 271                 }
 272         }
 273
 274         mmc_data = *data;
 275         platform_device_register(&at91sam9260_mmc_device);
 276 }
 277 #else
 278 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 279 #endif
 280
 281 /* --------------------------------------------------------------------
 282  *  MMC / SD Slot for Atmel MCI Driver
 283  * -------------------------------------------------------------------- */
 284
 285 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 286 static u64 mmc_dmamask = DMA_BIT_MASK(32);
 287 static struct mci_platform_data mmc_data;
 288
 289 static struct resource mmc_resources[] = {
 290         [0] = {
 291                 .start  = AT91SAM9260_BASE_MCI,
 292                 .end    = AT91SAM9260_BASE_MCI + SZ_16K - 1,
 293                 .flags  = IORESOURCE_MEM,
 294         },
 295         [1] = {
 296                 .start  = AT91SAM9260_ID_MCI,
 297                 .end    = AT91SAM9260_ID_MCI,
 298                 .flags  = IORESOURCE_IRQ,
 299         },
 300 };
 301
 302 static struct platform_device at91sam9260_mmc_device = {
 303         .name           = "atmel_mci",
 304         .id             = -1,
 305         .dev            = {
 306                                 .dma_mask               = &mmc_dmamask,
 307                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 308                                 .platform_data          = &mmc_data,
 309         },
 310         .resource       = mmc_resources,
 311         .num_resources  = ARRAY_SIZE(mmc_resources),
 312 };
 313
 314 void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 315 {
 316         unsigned int i;
 317         unsigned int slot_count = 0;
 318
 319         if (!data)
 320                 return;
 321
 322         for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
 323                 if (data->slot[i].bus_width) {
 324                         /* input/irq */
 325                         if (data->slot[i].detect_pin) {
 326                                 at91_set_gpio_input(data->slot[i].detect_pin, 1);
 327                                 at91_set_deglitch(data->slot[i].detect_pin, 1);
 328                         }
 329                         if (data->slot[i].wp_pin)
 330                                 at91_set_gpio_input(data->slot[i].wp_pin, 1);
 331
 332                         switch (i) {
 333                         case 0:
 334                                 /* CMD */
 335                                 at91_set_A_periph(AT91_PIN_PA7, 1);
 336                                 /* DAT0, maybe DAT1..DAT3 */
 337                                 at91_set_A_periph(AT91_PIN_PA6, 1);
 338                                 if (data->slot[i].bus_width == 4) {
 339                                         at91_set_A_periph(AT91_PIN_PA9, 1);
 340                                         at91_set_A_periph(AT91_PIN_PA10, 1);
 341                                         at91_set_A_periph(AT91_PIN_PA11, 1);
 342                                 }
 343                                 slot_count++;
 344                                 break;
 345                         case 1:
 346                                 /* CMD */
 347                                 at91_set_B_periph(AT91_PIN_PA1, 1);
 348                                 /* DAT0, maybe DAT1..DAT3 */
 349                                 at91_set_B_periph(AT91_PIN_PA0, 1);
 350                                 if (data->slot[i].bus_width == 4) {
 351                                         at91_set_B_periph(AT91_PIN_PA5, 1);
 352                                         at91_set_B_periph(AT91_PIN_PA4, 1);
 353                                         at91_set_B_periph(AT91_PIN_PA3, 1);
 354                                 }
 355                                 slot_count++;
 356                                 break;
 357                         default:
 358                                 printk(KERN_ERR
 359                                         "AT91: SD/MMC slot %d not available\n", i);
 360                                 break;
 361                         }
 362                 }
 363         }
 364
 365         if (slot_count) {
 366                 /* CLK */
 367                 at91_set_A_periph(AT91_PIN_PA8, 0);
 368
 369                 mmc_data = *data;
 370                 platform_device_register(&at91sam9260_mmc_device);
 371         }
 372 }
 373 #else
 374 void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
 375 #endif
 376
 377
 378 /* --------------------------------------------------------------------
 379  *  NAND / SmartMedia
 380  * -------------------------------------------------------------------- */
 381
 382 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 383 static struct atmel_nand_data nand_data;
 384
 385 #define NAND_BASE       AT91_CHIPSELECT_3
 386
 387 static struct resource nand_resources[] = {
 388         [0] = {
 389                 .start  = NAND_BASE,
 390                 .end    = NAND_BASE + SZ_256M - 1,
 391                 .flags  = IORESOURCE_MEM,
 392         },
 393         [1] = {
 394                 .start  = AT91_BASE_SYS + AT91_ECC,
 395                 .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
 396                 .flags  = IORESOURCE_MEM,
 397         }
 398 };
 399
 400 static struct platform_device at91sam9260_nand_device = {
 401         .name           = "atmel_nand",
 402         .id             = -1,
 403         .dev            = {
 404                                 .platform_data  = &nand_data,
 405         },
 406         .resource       = nand_resources,
 407         .num_resources  = ARRAY_SIZE(nand_resources),
 408 };
 409
 410 void __init at91_add_device_nand(struct atmel_nand_data *data)
 411 {
 412         unsigned long csa;
 413
 414         if (!data)
 415                 return;
 416
 417         csa = at91_sys_read(AT91_MATRIX_EBICSA);
 418         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 419
 420         /* enable pin */
 421         if (data->enable_pin)
 422                 at91_set_gpio_output(data->enable_pin, 1);
 423
 424         /* ready/busy pin */
 425         if (data->rdy_pin)
 426                 at91_set_gpio_input(data->rdy_pin, 1);
 427
 428         /* card detect pin */
 429         if (data->det_pin)
 430                 at91_set_gpio_input(data->det_pin, 1);
 431
 432         nand_data = *data;
 433         platform_device_register(&at91sam9260_nand_device);
 434 }
 435 #else
 436 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 437 #endif
 438
 439
 440 /* --------------------------------------------------------------------
 441  *  TWI (i2c)
 442  * -------------------------------------------------------------------- */
 443
 444 /*
 445  * Prefer the GPIO code since the TWI controller isn't robust
 446  * (gets overruns and underruns under load) and can only issue
 447  * repeated STARTs in one scenario (the driver doesn't yet handle them).
 448  */
 449
 450 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 451
 452 static struct i2c_gpio_platform_data pdata = {
 453         .sda_pin                = AT91_PIN_PA23,
 454         .sda_is_open_drain      = 1,
 455         .scl_pin                = AT91_PIN_PA24,
 456         .scl_is_open_drain      = 1,
 457         .udelay                 = 2,            /* ~100 kHz */
 458 };
 459
 460 static struct platform_device at91sam9260_twi_device = {
 461         .name                   = "i2c-gpio",
 462         .id                     = -1,
 463         .dev.platform_data      = &pdata,
 464 };
 465
 466 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 467 {
 468         at91_set_GPIO_periph(AT91_PIN_PA23, 1);         /* TWD (SDA) */
 469         at91_set_multi_drive(AT91_PIN_PA23, 1);
 470
 471         at91_set_GPIO_periph(AT91_PIN_PA24, 1);         /* TWCK (SCL) */
 472         at91_set_multi_drive(AT91_PIN_PA24, 1);
 473
 474         i2c_register_board_info(0, devices, nr_devices);
 475         platform_device_register(&at91sam9260_twi_device);
 476 }
 477
 478 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 479
 480 static struct resource twi_resources[] = {
 481         [0] = {
 482                 .start  = AT91SAM9260_BASE_TWI,
 483                 .end    = AT91SAM9260_BASE_TWI + SZ_16K - 1,
 484                 .flags  = IORESOURCE_MEM,
 485         },
 486         [1] = {
 487                 .start  = AT91SAM9260_ID_TWI,
 488                 .end    = AT91SAM9260_ID_TWI,
 489                 .flags  = IORESOURCE_IRQ,
 490         },
 491 };
 492
 493 static struct platform_device at91sam9260_twi_device = {
 494         .name           = "at91_i2c",
 495         .id             = -1,
 496         .resource       = twi_resources,
 497         .num_resources  = ARRAY_SIZE(twi_resources),
 498 };
 499
 500 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 501 {
 502         /* pins used for TWI interface */
 503         at91_set_A_periph(AT91_PIN_PA23, 0);            /* TWD */
 504         at91_set_multi_drive(AT91_PIN_PA23, 1);
 505
 506         at91_set_A_periph(AT91_PIN_PA24, 0);            /* TWCK */
 507         at91_set_multi_drive(AT91_PIN_PA24, 1);
 508
 509         i2c_register_board_info(0, devices, nr_devices);
 510         platform_device_register(&at91sam9260_twi_device);
 511 }
 512 #else
 513 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 514 #endif
 515
 516
 517 /* --------------------------------------------------------------------
 518  *  SPI
 519  * -------------------------------------------------------------------- */
 520
 521 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 522 static u64 spi_dmamask = DMA_BIT_MASK(32);
 523
 524 static struct resource spi0_resources[] = {
 525         [0] = {
 526                 .start  = AT91SAM9260_BASE_SPI0,
 527                 .end    = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
 528                 .flags  = IORESOURCE_MEM,
 529         },
 530         [1] = {
 531                 .start  = AT91SAM9260_ID_SPI0,
 532                 .end    = AT91SAM9260_ID_SPI0,
 533                 .flags  = IORESOURCE_IRQ,
 534         },
 535 };
 536
 537 static struct platform_device at91sam9260_spi0_device = {
 538         .name           = "atmel_spi",
 539         .id             = 0,
 540         .dev            = {
 541                                 .dma_mask               = &spi_dmamask,
 542                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 543         },
 544         .resource       = spi0_resources,
 545         .num_resources  = ARRAY_SIZE(spi0_resources),
 546 };
 547
 548 static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
 549
 550 static struct resource spi1_resources[] = {
 551         [0] = {
 552                 .start  = AT91SAM9260_BASE_SPI1,
 553                 .end    = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
 554                 .flags  = IORESOURCE_MEM,
 555         },
 556         [1] = {
 557                 .start  = AT91SAM9260_ID_SPI1,
 558                 .end    = AT91SAM9260_ID_SPI1,
 559                 .flags  = IORESOURCE_IRQ,
 560         },
 561 };
 562
 563 static struct platform_device at91sam9260_spi1_device = {
 564         .name           = "atmel_spi",
 565         .id             = 1,
 566         .dev            = {
 567                                 .dma_mask               = &spi_dmamask,
 568                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 569         },
 570         .resource       = spi1_resources,
 571         .num_resources  = ARRAY_SIZE(spi1_resources),
 572 };
 573
 574 static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
 575
 576 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 577 {
 578         int i;
 579         unsigned long cs_pin;
 580         short enable_spi0 = 0;
 581         short enable_spi1 = 0;
 582
 583         /* Choose SPI chip-selects */
 584         for (i = 0; i < nr_devices; i++) {
 585                 if (devices[i].controller_data)
 586                         cs_pin = (unsigned long) devices[i].controller_data;
 587                 else if (devices[i].bus_num == 0)
 588                         cs_pin = spi0_standard_cs[devices[i].chip_select];
 589                 else
 590                         cs_pin = spi1_standard_cs[devices[i].chip_select];
 591
 592                 if (devices[i].bus_num == 0)
 593                         enable_spi0 = 1;
 594                 else
 595                         enable_spi1 = 1;
 596
 597                 /* enable chip-select pin */
 598                 at91_set_gpio_output(cs_pin, 1);
 599
 600                 /* pass chip-select pin to driver */
 601                 devices[i].controller_data = (void *) cs_pin;
 602         }
 603
 604         spi_register_board_info(devices, nr_devices);
 605
 606         /* Configure SPI bus(es) */
 607         if (enable_spi0) {
 608                 at91_set_A_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
 609                 at91_set_A_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
 610                 at91_set_A_periph(AT91_PIN_PA2, 0);     /* SPI1_SPCK */
 611
 612                 at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
 613                 platform_device_register(&at91sam9260_spi0_device);
 614         }
 615         if (enable_spi1) {
 616                 at91_set_A_periph(AT91_PIN_PB0, 0);     /* SPI1_MISO */
 617                 at91_set_A_periph(AT91_PIN_PB1, 0);     /* SPI1_MOSI */
 618                 at91_set_A_periph(AT91_PIN_PB2, 0);     /* SPI1_SPCK */
 619
 620                 at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
 621                 platform_device_register(&at91sam9260_spi1_device);
 622         }
 623 }
 624 #else
 625 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
 626 #endif
 627
 628
 629 /* --------------------------------------------------------------------
 630  *  Timer/Counter blocks
 631  * -------------------------------------------------------------------- */
 632
 633 #ifdef CONFIG_ATMEL_TCLIB
 634
 635 static struct resource tcb0_resources[] = {
 636         [0] = {
 637                 .start  = AT91SAM9260_BASE_TCB0,
 638                 .end    = AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
 639                 .flags  = IORESOURCE_MEM,
 640         },
 641         [1] = {
 642                 .start  = AT91SAM9260_ID_TC0,
 643                 .end    = AT91SAM9260_ID_TC0,
 644                 .flags  = IORESOURCE_IRQ,
 645         },
 646         [2] = {
 647                 .start  = AT91SAM9260_ID_TC1,
 648                 .end    = AT91SAM9260_ID_TC1,
 649                 .flags  = IORESOURCE_IRQ,
 650         },
 651         [3] = {
 652                 .start  = AT91SAM9260_ID_TC2,
 653                 .end    = AT91SAM9260_ID_TC2,
 654                 .flags  = IORESOURCE_IRQ,
 655         },
 656 };
 657
 658 static struct platform_device at91sam9260_tcb0_device = {
 659         .name           = "atmel_tcb",
 660         .id             = 0,
 661         .resource       = tcb0_resources,
 662         .num_resources  = ARRAY_SIZE(tcb0_resources),
 663 };
 664
 665 static struct resource tcb1_resources[] = {
 666         [0] = {
 667                 .start  = AT91SAM9260_BASE_TCB1,
 668                 .end    = AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
 669                 .flags  = IORESOURCE_MEM,
 670         },
 671         [1] = {
 672                 .start  = AT91SAM9260_ID_TC3,
 673                 .end    = AT91SAM9260_ID_TC3,
 674                 .flags  = IORESOURCE_IRQ,
 675         },
 676         [2] = {
 677                 .start  = AT91SAM9260_ID_TC4,
 678                 .end    = AT91SAM9260_ID_TC4,
 679                 .flags  = IORESOURCE_IRQ,
 680         },
 681         [3] = {
 682                 .start  = AT91SAM9260_ID_TC5,
 683                 .end    = AT91SAM9260_ID_TC5,
 684                 .flags  = IORESOURCE_IRQ,
 685         },
 686 };
 687
 688 static struct platform_device at91sam9260_tcb1_device = {
 689         .name           = "atmel_tcb",
 690         .id             = 1,
 691         .resource       = tcb1_resources,
 692         .num_resources  = ARRAY_SIZE(tcb1_resources),
 693 };
 694
 695 static void __init at91_add_device_tc(void)
 696 {
 697         /* this chip has a separate clock and irq for each TC channel */
 698         at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
 699         at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
 700         at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
 701         platform_device_register(&at91sam9260_tcb0_device);
 702
 703         at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
 704         at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
 705         at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
 706         platform_device_register(&at91sam9260_tcb1_device);
 707 }
 708 #else
 709 static void __init at91_add_device_tc(void) { }
 710 #endif
 711
 712
 713 /* --------------------------------------------------------------------
 714  *  RTT
 715  * -------------------------------------------------------------------- */
 716
 717 static struct resource rtt_resources[] = {
 718         {
 719                 .start  = AT91_BASE_SYS + AT91_RTT,
 720                 .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
 721                 .flags  = IORESOURCE_MEM,
 722         }
 723 };
 724
 725 static struct platform_device at91sam9260_rtt_device = {
 726         .name           = "at91_rtt",
 727         .id             = 0,
 728         .resource       = rtt_resources,
 729         .num_resources  = ARRAY_SIZE(rtt_resources),
 730 };
 731
 732 static void __init at91_add_device_rtt(void)
 733 {
 734         platform_device_register(&at91sam9260_rtt_device);
 735 }
 736
 737
 738 /* --------------------------------------------------------------------
 739  *  Watchdog
 740  * -------------------------------------------------------------------- */
 741
 742 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 743 static struct platform_device at91sam9260_wdt_device = {
 744         .name           = "at91_wdt",
 745         .id             = -1,
 746         .num_resources  = 0,
 747 };
 748
 749 static void __init at91_add_device_watchdog(void)
 750 {
 751         platform_device_register(&at91sam9260_wdt_device);
 752 }
 753 #else
 754 static void __init at91_add_device_watchdog(void) {}
 755 #endif
 756
 757
 758 /* --------------------------------------------------------------------
 759  *  SSC -- Synchronous Serial Controller
 760  * -------------------------------------------------------------------- */
 761
 762 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
 763 static u64 ssc_dmamask = DMA_BIT_MASK(32);
 764
 765 static struct resource ssc_resources[] = {
 766         [0] = {
 767                 .start  = AT91SAM9260_BASE_SSC,
 768                 .end    = AT91SAM9260_BASE_SSC + SZ_16K - 1,
 769                 .flags  = IORESOURCE_MEM,
 770         },
 771         [1] = {
 772                 .start  = AT91SAM9260_ID_SSC,
 773                 .end    = AT91SAM9260_ID_SSC,
 774                 .flags  = IORESOURCE_IRQ,
 775         },
 776 };
 777
 778 static struct platform_device at91sam9260_ssc_device = {
 779         .name   = "ssc",
 780         .id     = 0,
 781         .dev    = {
 782                 .dma_mask               = &ssc_dmamask,
 783                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 784         },
 785         .resource       = ssc_resources,
 786         .num_resources  = ARRAY_SIZE(ssc_resources),
 787 };
 788
 789 static inline void configure_ssc_pins(unsigned pins)
 790 {
 791         if (pins & ATMEL_SSC_TF)
 792                 at91_set_A_periph(AT91_PIN_PB17, 1);
 793         if (pins & ATMEL_SSC_TK)
 794                 at91_set_A_periph(AT91_PIN_PB16, 1);
 795         if (pins & ATMEL_SSC_TD)
 796                 at91_set_A_periph(AT91_PIN_PB18, 1);
 797         if (pins & ATMEL_SSC_RD)
 798                 at91_set_A_periph(AT91_PIN_PB19, 1);
 799         if (pins & ATMEL_SSC_RK)
 800                 at91_set_A_periph(AT91_PIN_PB20, 1);
 801         if (pins & ATMEL_SSC_RF)
 802                 at91_set_A_periph(AT91_PIN_PB21, 1);
 803 }
 804
 805 /*
 806  * SSC controllers are accessed through library code, instead of any
 807  * kind of all-singing/all-dancing driver.  For example one could be
 808  * used by a particular I2S audio codec's driver, while another one
 809  * on the same system might be used by a custom data capture driver.
 810  */
 811 void __init at91_add_device_ssc(unsigned id, unsigned pins)
 812 {
 813         struct platform_device *pdev;
 814
 815         /*
 816          * NOTE: caller is responsible for passing information matching
 817          * "pins" to whatever will be using each particular controller.
 818          */
 819         switch (id) {
 820         case AT91SAM9260_ID_SSC:
 821                 pdev = &at91sam9260_ssc_device;
 822                 configure_ssc_pins(pins);
 823                 at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
 824                 break;
 825         default:
 826                 return;
 827         }
 828
 829         platform_device_register(pdev);
 830 }
 831
 832 #else
 833 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 834 #endif
 835
 836
 837 /* --------------------------------------------------------------------
 838  *  UART
 839  * -------------------------------------------------------------------- */
 840 #if defined(CONFIG_SERIAL_ATMEL)
 841 static struct resource dbgu_resources[] = {
 842         [0] = {
 843                 .start  = AT91_VA_BASE_SYS + AT91_DBGU,
 844                 .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 845                 .flags  = IORESOURCE_MEM,
 846         },
 847         [1] = {
 848                 .start  = AT91_ID_SYS,
 849                 .end    = AT91_ID_SYS,
 850                 .flags  = IORESOURCE_IRQ,
 851         },
 852 };
 853
 854 static struct atmel_uart_data dbgu_data = {
 855         .use_dma_tx     = 0,
 856         .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
 857         .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 858 };
 859
 860 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
 861
 862 static struct platform_device at91sam9260_dbgu_device = {
 863         .name           = "atmel_usart",
 864         .id             = 0,
 865         .dev            = {
 866                                 .dma_mask               = &dbgu_dmamask,
 867                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 868                                 .platform_data          = &dbgu_data,
 869         },
 870         .resource       = dbgu_resources,
 871         .num_resources  = ARRAY_SIZE(dbgu_resources),
 872 };
 873
 874 static inline void configure_dbgu_pins(void)
 875 {
 876         at91_set_A_periph(AT91_PIN_PB14, 0);            /* DRXD */
 877         at91_set_A_periph(AT91_PIN_PB15, 1);            /* DTXD */
 878 }
 879
 880 static struct resource uart0_resources[] = {
 881         [0] = {
 882                 .start  = AT91SAM9260_BASE_US0,
 883                 .end    = AT91SAM9260_BASE_US0 + SZ_16K - 1,
 884                 .flags  = IORESOURCE_MEM,
 885         },
 886         [1] = {
 887                 .start  = AT91SAM9260_ID_US0,
 888                 .end    = AT91SAM9260_ID_US0,
 889                 .flags  = IORESOURCE_IRQ,
 890         },
 891 };
 892
 893 static struct atmel_uart_data uart0_data = {
 894         .use_dma_tx     = 1,
 895         .use_dma_rx     = 1,
 896 };
 897
 898 static u64 uart0_dmamask = DMA_BIT_MASK(32);
 899
 900 static struct platform_device at91sam9260_uart0_device = {
 901         .name           = "atmel_usart",
 902         .id             = 1,
 903         .dev            = {
 904                                 .dma_mask               = &uart0_dmamask,
 905                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 906                                 .platform_data          = &uart0_data,
 907         },
 908         .resource       = uart0_resources,
 909         .num_resources  = ARRAY_SIZE(uart0_resources),
 910 };
 911
 912 static inline void configure_usart0_pins(unsigned pins)
 913 {
 914         at91_set_A_periph(AT91_PIN_PB4, 1);             /* TXD0 */
 915         at91_set_A_periph(AT91_PIN_PB5, 0);             /* RXD0 */
 916
 917         if (pins & ATMEL_UART_RTS)
 918                 at91_set_A_periph(AT91_PIN_PB26, 0);    /* RTS0 */
 919         if (pins & ATMEL_UART_CTS)
 920                 at91_set_A_periph(AT91_PIN_PB27, 0);    /* CTS0 */
 921         if (pins & ATMEL_UART_DTR)
 922                 at91_set_A_periph(AT91_PIN_PB24, 0);    /* DTR0 */
 923         if (pins & ATMEL_UART_DSR)
 924                 at91_set_A_periph(AT91_PIN_PB22, 0);    /* DSR0 */
 925         if (pins & ATMEL_UART_DCD)
 926                 at91_set_A_periph(AT91_PIN_PB23, 0);    /* DCD0 */
 927         if (pins & ATMEL_UART_RI)
 928                 at91_set_A_periph(AT91_PIN_PB25, 0);    /* RI0 */
 929 }
 930
 931 static struct resource uart1_resources[] = {
 932         [0] = {
 933                 .start  = AT91SAM9260_BASE_US1,
 934                 .end    = AT91SAM9260_BASE_US1 + SZ_16K - 1,
 935                 .flags  = IORESOURCE_MEM,
 936         },
 937         [1] = {
 938                 .start  = AT91SAM9260_ID_US1,
 939                 .end    = AT91SAM9260_ID_US1,
 940                 .flags  = IORESOURCE_IRQ,
 941         },
 942 };
 943
 944 static struct atmel_uart_data uart1_data = {
 945         .use_dma_tx     = 1,
 946         .use_dma_rx     = 1,
 947 };
 948
 949 static u64 uart1_dmamask = DMA_BIT_MASK(32);
 950
 951 static struct platform_device at91sam9260_uart1_device = {
 952         .name           = "atmel_usart",
 953         .id             = 2,
 954         .dev            = {
 955                                 .dma_mask               = &uart1_dmamask,
 956                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 957                                 .platform_data          = &uart1_data,
 958         },
 959         .resource       = uart1_resources,
 960         .num_resources  = ARRAY_SIZE(uart1_resources),
 961 };
 962
 963 static inline void configure_usart1_pins(unsigned pins)
 964 {
 965         at91_set_A_periph(AT91_PIN_PB6, 1);             /* TXD1 */
 966         at91_set_A_periph(AT91_PIN_PB7, 0);             /* RXD1 */
 967
 968         if (pins & ATMEL_UART_RTS)
 969                 at91_set_A_periph(AT91_PIN_PB28, 0);    /* RTS1 */
 970         if (pins & ATMEL_UART_CTS)
 971                 at91_set_A_periph(AT91_PIN_PB29, 0);    /* CTS1 */
 972 }
 973
 974 static struct resource uart2_resources[] = {
 975         [0] = {
 976                 .start  = AT91SAM9260_BASE_US2,
 977                 .end    = AT91SAM9260_BASE_US2 + SZ_16K - 1,
 978                 .flags  = IORESOURCE_MEM,
 979         },
 980         [1] = {
 981                 .start  = AT91SAM9260_ID_US2,
 982                 .end    = AT91SAM9260_ID_US2,
 983                 .flags  = IORESOURCE_IRQ,
 984         },
 985 };
 986
 987 static struct atmel_uart_data uart2_data = {
 988         .use_dma_tx     = 1,
 989         .use_dma_rx     = 1,
 990 };
 991
 992 static u64 uart2_dmamask = DMA_BIT_MASK(32);
 993
 994 static struct platform_device at91sam9260_uart2_device = {
 995         .name           = "atmel_usart",
 996         .id             = 3,
 997         .dev            = {
 998                                 .dma_mask               = &uart2_dmamask,
 999                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1000                                 .platform_data          = &uart2_data,
1001         },
1002         .resource       = uart2_resources,
1003         .num_resources  = ARRAY_SIZE(uart2_resources),
1004 };
1005
1006 static inline void configure_usart2_pins(unsigned pins)
1007 {
1008         at91_set_A_periph(AT91_PIN_PB8, 1);             /* TXD2 */
1009         at91_set_A_periph(AT91_PIN_PB9, 0);             /* RXD2 */
1010
1011         if (pins & ATMEL_UART_RTS)
1012                 at91_set_A_periph(AT91_PIN_PA4, 0);     /* RTS2 */
1013         if (pins & ATMEL_UART_CTS)
1014                 at91_set_A_periph(AT91_PIN_PA5, 0);     /* CTS2 */
1015 }
1016
1017 static struct resource uart3_resources[] = {
1018         [0] = {
1019                 .start  = AT91SAM9260_BASE_US3,
1020                 .end    = AT91SAM9260_BASE_US3 + SZ_16K - 1,
1021                 .flags  = IORESOURCE_MEM,
1022         },
1023         [1] = {
1024                 .start  = AT91SAM9260_ID_US3,
1025                 .end    = AT91SAM9260_ID_US3,
1026                 .flags  = IORESOURCE_IRQ,
1027         },
1028 };
1029
1030 static struct atmel_uart_data uart3_data = {
1031         .use_dma_tx     = 1,
1032         .use_dma_rx     = 1,
1033 };
1034
1035 static u64 uart3_dmamask = DMA_BIT_MASK(32);
1036
1037 static struct platform_device at91sam9260_uart3_device = {
1038         .name           = "atmel_usart",
1039         .id             = 4,
1040         .dev            = {
1041                                 .dma_mask               = &uart3_dmamask,
1042                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1043                                 .platform_data          = &uart3_data,
1044         },
1045         .resource       = uart3_resources,
1046         .num_resources  = ARRAY_SIZE(uart3_resources),
1047 };
1048
1049 static inline void configure_usart3_pins(unsigned pins)
1050 {
1051         at91_set_A_periph(AT91_PIN_PB10, 1);            /* TXD3 */
1052         at91_set_A_periph(AT91_PIN_PB11, 0);            /* RXD3 */
1053
1054         if (pins & ATMEL_UART_RTS)
1055                 at91_set_B_periph(AT91_PIN_PC8, 0);     /* RTS3 */
1056         if (pins & ATMEL_UART_CTS)
1057                 at91_set_B_periph(AT91_PIN_PC10, 0);    /* CTS3 */
1058 }
1059
1060 static struct resource uart4_resources[] = {
1061         [0] = {
1062                 .start  = AT91SAM9260_BASE_US4,
1063                 .end    = AT91SAM9260_BASE_US4 + SZ_16K - 1,
1064                 .flags  = IORESOURCE_MEM,
1065         },
1066         [1] = {
1067                 .start  = AT91SAM9260_ID_US4,
1068                 .end    = AT91SAM9260_ID_US4,
1069                 .flags  = IORESOURCE_IRQ,
1070         },
1071 };
1072
1073 static struct atmel_uart_data uart4_data = {
1074         .use_dma_tx     = 1,
1075         .use_dma_rx     = 1,
1076 };
1077
1078 static u64 uart4_dmamask = DMA_BIT_MASK(32);
1079
1080 static struct platform_device at91sam9260_uart4_device = {
1081         .name           = "atmel_usart",
1082         .id             = 5,
1083         .dev            = {
1084                                 .dma_mask               = &uart4_dmamask,
1085                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1086                                 .platform_data          = &uart4_data,
1087         },
1088         .resource       = uart4_resources,
1089         .num_resources  = ARRAY_SIZE(uart4_resources),
1090 };
1091
1092 static inline void configure_usart4_pins(void)
1093 {
1094         at91_set_B_periph(AT91_PIN_PA31, 1);            /* TXD4 */
1095         at91_set_B_periph(AT91_PIN_PA30, 0);            /* RXD4 */
1096 }
1097
1098 static struct resource uart5_resources[] = {
1099         [0] = {
1100                 .start  = AT91SAM9260_BASE_US5,
1101                 .end    = AT91SAM9260_BASE_US5 + SZ_16K - 1,
1102                 .flags  = IORESOURCE_MEM,
1103         },
1104         [1] = {
1105                 .start  = AT91SAM9260_ID_US5,
1106                 .end    = AT91SAM9260_ID_US5,
1107                 .flags  = IORESOURCE_IRQ,
1108         },
1109 };
1110
1111 static struct atmel_uart_data uart5_data = {
1112         .use_dma_tx     = 1,
1113         .use_dma_rx     = 1,
1114 };
1115
1116 static u64 uart5_dmamask = DMA_BIT_MASK(32);
1117
1118 static struct platform_device at91sam9260_uart5_device = {
1119         .name           = "atmel_usart",
1120         .id             = 6,
1121         .dev            = {
1122                                 .dma_mask               = &uart5_dmamask,
1123                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1124                                 .platform_data          = &uart5_data,
1125         },
1126         .resource       = uart5_resources,
1127         .num_resources  = ARRAY_SIZE(uart5_resources),
1128 };
1129
1130 static inline void configure_usart5_pins(void)
1131 {
1132         at91_set_A_periph(AT91_PIN_PB12, 1);            /* TXD5 */
1133         at91_set_A_periph(AT91_PIN_PB13, 0);            /* RXD5 */
1134 }
1135
1136 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1137 struct platform_device *atmel_default_console_device;   /* the serial console device */
1138
1139 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1140 {
1141         struct platform_device *pdev;
1142         struct atmel_uart_data *pdata;
1143
1144         switch (id) {
1145                 case 0:         /* DBGU */
1146                         pdev = &at91sam9260_dbgu_device;
1147                         configure_dbgu_pins();
1148                         at91_clock_associate("mck", &pdev->dev, "usart");
1149                         break;
1150                 case AT91SAM9260_ID_US0:
1151                         pdev = &at91sam9260_uart0_device;
1152                         configure_usart0_pins(pins);
1153                         at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1154                         break;
1155                 case AT91SAM9260_ID_US1:
1156                         pdev = &at91sam9260_uart1_device;
1157                         configure_usart1_pins(pins);
1158                         at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1159                         break;
1160                 case AT91SAM9260_ID_US2:
1161                         pdev = &at91sam9260_uart2_device;
1162                         configure_usart2_pins(pins);
1163                         at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1164                         break;
1165                 case AT91SAM9260_ID_US3:
1166                         pdev = &at91sam9260_uart3_device;
1167                         configure_usart3_pins(pins);
1168                         at91_clock_associate("usart3_clk", &pdev->dev, "usart");
1169                         break;
1170                 case AT91SAM9260_ID_US4:
1171                         pdev = &at91sam9260_uart4_device;
1172                         configure_usart4_pins();
1173                         at91_clock_associate("usart4_clk", &pdev->dev, "usart");
1174                         break;
1175                 case AT91SAM9260_ID_US5:
1176                         pdev = &at91sam9260_uart5_device;
1177                         configure_usart5_pins();
1178                         at91_clock_associate("usart5_clk", &pdev->dev, "usart");
1179                         break;
1180                 default:
1181                         return;
1182         }
1183         pdata = pdev->dev.platform_data;
1184         pdata->num = portnr;            /* update to mapped ID */
1185
1186         if (portnr < ATMEL_MAX_UART)
1187                 at91_uarts[portnr] = pdev;
1188 }
1189
1190 void __init at91_set_serial_console(unsigned portnr)
1191 {
1192         if (portnr < ATMEL_MAX_UART)
1193                 atmel_default_console_device = at91_uarts[portnr];
1194 }
1195
1196 void __init at91_add_device_serial(void)
1197 {
1198         int i;
1199
1200         for (i = 0; i < ATMEL_MAX_UART; i++) {
1201                 if (at91_uarts[i])
1202                         platform_device_register(at91_uarts[i]);
1203         }
1204
1205         if (!atmel_default_console_device)
1206                 printk(KERN_INFO "AT91: No default serial console defined.\n");
1207 }
1208 #else
1209 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1210 void __init at91_set_serial_console(unsigned portnr) {}
1211 void __init at91_add_device_serial(void) {}
1212 #endif
1213
1214 /* --------------------------------------------------------------------
1215  *  CF/IDE
1216  * -------------------------------------------------------------------- */
1217
1218 #if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
1219         defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
1220         defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
1221
1222 static struct at91_cf_data cf0_data;
1223
1224 static struct resource cf0_resources[] = {
1225         [0] = {
1226                 .start  = AT91_CHIPSELECT_4,
1227                 .end    = AT91_CHIPSELECT_4 + SZ_256M - 1,
1228                 .flags  = IORESOURCE_MEM,
1229         }
1230 };
1231
1232 static struct platform_device cf0_device = {
1233         .id             = 0,
1234         .dev            = {
1235                                 .platform_data  = &cf0_data,
1236         },
1237         .resource       = cf0_resources,
1238         .num_resources  = ARRAY_SIZE(cf0_resources),
1239 };
1240
1241 static struct at91_cf_data cf1_data;
1242
1243 static struct resource cf1_resources[] = {
1244         [0] = {
1245                 .start  = AT91_CHIPSELECT_5,
1246                 .end    = AT91_CHIPSELECT_5 + SZ_256M - 1,
1247                 .flags  = IORESOURCE_MEM,
1248         }
1249 };
1250
1251 static struct platform_device cf1_device = {
1252         .id             = 1,
1253         .dev            = {
1254                                 .platform_data  = &cf1_data,
1255         },
1256         .resource       = cf1_resources,
1257         .num_resources  = ARRAY_SIZE(cf1_resources),
1258 };
1259
1260 void __init at91_add_device_cf(struct at91_cf_data *data)
1261 {
1262         struct platform_device *pdev;
1263         unsigned long csa;
1264
1265         if (!data)
1266                 return;
1267
1268         csa = at91_sys_read(AT91_MATRIX_EBICSA);
1269
1270         switch (data->chipselect) {
1271         case 4:
1272                 at91_set_multi_drive(AT91_PIN_PC8, 0);
1273                 at91_set_A_periph(AT91_PIN_PC8, 0);
1274                 csa |= AT91_MATRIX_CS4A_SMC_CF1;
1275                 cf0_data = *data;
1276                 pdev = &cf0_device;
1277                 break;
1278         case 5:
1279                 at91_set_multi_drive(AT91_PIN_PC9, 0);
1280                 at91_set_A_periph(AT91_PIN_PC9, 0);
1281                 csa |= AT91_MATRIX_CS5A_SMC_CF2;
1282                 cf1_data = *data;
1283                 pdev = &cf1_device;
1284                 break;
1285         default:
1286                 printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
1287                        data->chipselect);
1288                 return;
1289         }
1290
1291         at91_sys_write(AT91_MATRIX_EBICSA, csa);
1292
1293         if (data->rst_pin) {
1294                 at91_set_multi_drive(data->rst_pin, 0);
1295                 at91_set_gpio_output(data->rst_pin, 1);
1296         }
1297
1298         if (data->irq_pin) {
1299                 at91_set_gpio_input(data->irq_pin, 0);
1300                 at91_set_deglitch(data->irq_pin, 1);
1301         }
1302
1303         if (data->det_pin) {
1304                 at91_set_gpio_input(data->det_pin, 0);
1305                 at91_set_deglitch(data->det_pin, 1);
1306         }
1307
1308         at91_set_B_periph(AT91_PIN_PC6, 0);     /* CFCE1 */
1309         at91_set_B_periph(AT91_PIN_PC7, 0);     /* CFCE2 */
1310         at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
1311         at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
1312
1313         if (data->flags & AT91_CF_TRUE_IDE)
1314 #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
1315                 pdev->name = "pata_at91";
1316 #elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
1317                 pdev->name = "at91_ide";
1318 #else
1319 #warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
1320 #endif
1321         else
1322                 pdev->name = "at91_cf";
1323
1324         platform_device_register(pdev);
1325 }
1326
1327 #else
1328 void __init at91_add_device_cf(struct at91_cf_data * data) {}
1329 #endif
1330
1331 /* -------------------------------------------------------------------- */
1332 /*
1333  * These devices are always present and don't need any board-specific
1334  * setup.
1335  */
1336 static int __init at91_add_standard_devices(void)
1337 {
1338         at91_add_device_rtt();
1339         at91_add_device_watchdog();
1340         at91_add_device_tc();
1341         return 0;
1342 }
1343
1344 arch_initcall(at91_add_standard_devices);