arch/arm/boot/dts/sun4i-a10-a1000.dts

   1 /*
   2  * Copyright 2013 Emilio López
   3  *
   4  * Emilio López <emilio@elopez.com.ar>
   5  *
   6  * This file is dual-licensed: you can use it either under the terms
   7  * of the GPL or the X11 license, at your option. Note that this dual
   8  * licensing only applies to this file, and not this project as a
   9  * whole.
  10  *
  11  *  a) This file is free software; you can redistribute it and/or
  12  *     modify it under the terms of the GNU General Public License as
  13  *     published by the Free Software Foundation; either version 2 of the
  14  *     License, or (at your option) any later version.
  15  *
  16  *     This file is distributed in the hope that it will be useful,
  17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  *     GNU General Public License for more details.
  20  *
  21  *     You should have received a copy of the GNU General Public
  22  *     License along with this file; if not, write to the Free
  23  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  24  *     MA 02110-1301 USA
  25  *
  26  * Or, alternatively,
  27  *
  28  *  b) Permission is hereby granted, free of charge, to any person
  29  *     obtaining a copy of this software and associated documentation
  30  *     files (the "Software"), to deal in the Software without
  31  *     restriction, including without limitation the rights to use,
  32  *     copy, modify, merge, publish, distribute, sublicense, and/or
  33  *     sell copies of the Software, and to permit persons to whom the
  34  *     Software is furnished to do so, subject to the following
  35  *     conditions:
  36  *
  37  *     The above copyright notice and this permission notice shall be
  38  *     included in all copies or substantial portions of the Software.
  39  *
  40  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  41  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  42  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  43  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  44  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  45  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  46  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  47  *     OTHER DEALINGS IN THE SOFTWARE.
  48  */
  49
  50 /dts-v1/;
  51 #include "sun4i-a10.dtsi"
  52 #include "sunxi-common-regulators.dtsi"
  53
  54 #include <dt-bindings/gpio/gpio.h>
  55
  56 / {
  57         model = "Mele A1000";
  58         compatible = "mele,a1000", "allwinner,sun4i-a10";
  59
  60         soc@01c00000 {
  61                 emac: ethernet@01c0b000 {
  62                         pinctrl-names = "default";
  63                         pinctrl-0 = <&emac_pins_a>;
  64                         phy = <&phy1>;
  65                         status = "okay";
  66                 };
  67
  68                 mdio@01c0b080 {
  69                         phy-supply = <&reg_emac_3v3>;
  70                         status = "okay";
  71
  72                         phy1: ethernet-phy@1 {
  73                                 reg = <1>;
  74                         };
  75                 };
  76
  77                 mmc0: mmc@01c0f000 {
  78                         pinctrl-names = "default";
  79                         pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
  80                         vmmc-supply = <&reg_vcc3v3>;
  81                         bus-width = <4>;
  82                         cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
  83                         cd-inverted;
  84                         status = "okay";
  85                 };
  86
  87                 usbphy: phy@01c13400 {
  88                         usb1_vbus-supply = <&reg_usb1_vbus>;
  89                         usb2_vbus-supply = <&reg_usb2_vbus>;
  90                         status = "okay";
  91                 };
  92
  93                 ehci0: usb@01c14000 {
  94                         status = "okay";
  95                 };
  96
  97                 ohci0: usb@01c14400 {
  98                         status = "okay";
  99                 };
 100
 101                 ahci: sata@01c18000 {
 102                         status = "okay";
 103                 };
 104
 105                 ehci1: usb@01c1c000 {
 106                         status = "okay";
 107                 };
 108
 109                 ohci1: usb@01c1c400 {
 110                         status = "okay";
 111                 };
 112
 113                 pinctrl@01c20800 {
 114                         emac_power_pin_a1000: emac_power_pin@0 {
 115                                 allwinner,pins = "PH15";
 116                                 allwinner,function = "gpio_out";
 117                                 allwinner,drive = <0>;
 118                                 allwinner,pull = <0>;
 119                         };
 120
 121                         led_pins_a1000: led_pins@0 {
 122                                 allwinner,pins = "PH10", "PH20";
 123                                 allwinner,function = "gpio_out";
 124                                 allwinner,drive = <0>;
 125                                 allwinner,pull = <0>;
 126                         };
 127                 };
 128
 129                 ir0: ir@01c21800 {
 130                         pinctrl-names = "default";
 131                         pinctrl-0 = <&ir0_pins_a>;
 132                         status = "okay";
 133                 };
 134
 135                 uart0: serial@01c28000 {
 136                         pinctrl-names = "default";
 137                         pinctrl-0 = <&uart0_pins_a>;
 138                         status = "okay";
 139                 };
 140
 141                 i2c0: i2c@01c2ac00 {
 142                         pinctrl-names = "default";
 143                         pinctrl-0 = <&i2c0_pins_a>;
 144                         status = "okay";
 145
 146                         axp209: pmic@34 {
 147                                 compatible = "x-powers,axp209";
 148                                 reg = <0x34>;
 149                                 interrupts = <0>;
 150
 151                                 interrupt-controller;
 152                                 #interrupt-cells = <1>;
 153                         };
 154                 };
 155         };
 156
 157         leds {
 158                 compatible = "gpio-leds";
 159                 pinctrl-names = "default";
 160                 pinctrl-0 = <&led_pins_a1000>;
 161
 162                 red {
 163                         label = "a1000:red:usr";
 164                         gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
 165                 };
 166
 167                 blue {
 168                         label = "a1000:blue:usr";
 169                         gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 170                 };
 171         };
 172
 173         reg_emac_3v3: emac-3v3 {
 174                 compatible = "regulator-fixed";
 175                 pinctrl-names = "default";
 176                 pinctrl-0 = <&emac_power_pin_a1000>;
 177                 regulator-name = "emac-3v3";
 178                 regulator-min-microvolt = <3300000>;
 179                 regulator-max-microvolt = <3300000>;
 180                 enable-active-high;
 181                 gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 182         };
 183
 184         reg_usb1_vbus: usb1-vbus {
 185                 status = "okay";
 186         };
 187
 188         reg_usb2_vbus: usb2-vbus {
 189                 status = "okay";
 190         };
 191 };