2 Advanced Linux Sound Architecture - Driver
3 ==========================================
10 To enable ALSA support you need at least to build the kernel with
11 primary sound card support (CONFIG_SOUND). Since ALSA can emulate OSS,
12 you don't have to choose any of the OSS modules.
14 Enable "OSS API emulation" (CONFIG_SND_OSSEMUL) and both OSS mixer and
15 PCM supports if you want to run OSS applications with ALSA.
17 If you want to support the WaveTable functionality on cards such as
18 SB Live! then you need to enable "Sequencer support"
19 (CONFIG_SND_SEQUENCER).
21 To make ALSA debug messages more verbose, enable the "Verbose printk"
22 and "Debug" options. To check for memory leaks, turn on "Debug memory"
23 too. "Debug detection" will add checks for the detection of cards.
25 Please note that all the ALSA ISA drivers support the Linux isapnp API
26 (if the card supports ISA PnP). You don't need to configure the cards
33 This depends on your distribution, but normally you use the /dev/MAKEDEV
34 script to create the necessary device nodes. On some systems you use a
35 script named 'snddevices'.
41 The user can load modules with options. If the module supports more than
42 one card and you have more than one card of the same type then you can
43 specify multiple values for the option separated by commas.
45 Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
50 The core ALSA module. It is used by all ALSA card drivers.
51 It takes the following options which have global effects.
53 major - major number for sound driver
56 - limiting card index for auto-loading (1-8)
58 - For auto-loading more than one card, specify this
59 option together with snd-card-X aliases.
60 slots - Reserve the slot index for the given driver.
61 This option takes multiple strings.
62 See "Module Autoloading Support" section for details.
67 The PCM OSS emulation module.
68 This module takes options which change the mapping of devices.
70 dsp_map - PCM device number maps assigned to the 1st OSS device.
72 adsp_map - PCM device number maps assigned to the 2st OSS device.
75 - Don't block opening busy PCM devices. Default: 1
77 For example, when dsp_map=2, /dev/dsp will be mapped to PCM #2 of
78 the card #0. Similarly, when adsp_map=0, /dev/adsp will be mapped
79 to PCM #0 of the card #0.
80 For changing the second or later card, specify the option with
81 commas, such like "dsp_map=0,1".
83 nonblock_open option is used to change the behavior of the PCM
84 regarding opening the device. When this option is non-zero,
85 opening a busy OSS PCM device won't be blocked but return
86 immediately with EAGAIN (just like O_NONBLOCK flag).
91 This module takes options which change the mapping of devices.
92 similar to those of the snd-pcm-oss module.
94 midi_map - MIDI device number maps assigned to the 1st OSS device.
96 amidi_map - MIDI device number maps assigned to the 2st OSS device.
99 Common parameters for top sound card modules
100 --------------------------------------------
102 Each of top level sound card module takes the following options.
104 index - index (slot #) of sound card
105 - Values: 0 through 31 or negative
106 - If nonnegative, assign that index number
107 - if negative, interpret as a bitmask of permissible
108 indices; the first free permitted index is assigned
110 id - card ID (identifier or name)
111 - Can be up to 15 characters long
112 - Default: the card type
113 - A directory by this name is created under /proc/asound/
114 containing information about the card
115 - This ID can be used instead of the index number in
118 - Default: enabled, for PCI and ISA PnP cards
123 Module for AdLib FM cards.
125 port - port # for OPL chip
127 This module supports multiple cards. It does not support autoprobe, so
128 the port must be specified. For actual AdLib FM cards it will be 0x388.
129 Note that this card does not have PCM support and no mixer; only FM
132 Make sure you have "sbiload" from the alsa-tools package available and,
133 after loading the module, find out the assigned ALSA sequencer port
134 number through "sbiload -l". Example output:
136 Port Client name Port name
137 64:0 OPL2 FM synth OPL2 FM Port
139 Load the std.sb and drums.sb patches also supplied by sbiload:
141 sbiload -p 64:0 std.sb drums.sb
143 If you use this driver to drive an OPL3, you can use std.o3 and drums.o3
144 instead. To have the card produce sound, use aplaymidi from alsa-utils:
146 aplaymidi -p 64:0 foo.mid
151 Module for sound cards based on Analog Devices AD1816A/AD1815 ISA chips.
153 clockfreq - Clock frequency for AD1816A chip (default = 0, 33000Hz)
155 This module supports multiple cards, autoprobe and PnP.
160 Module for sound cards based on AD1848/AD1847/CS4248 ISA chips.
162 port - port # for AD1848 chip
163 irq - IRQ # for AD1848 chip
164 dma1 - DMA # for AD1848 chip (0,1,3)
166 This module supports multiple cards. It does not support autoprobe
167 thus main port must be specified!!! Other ports are optional.
169 The power-management is supported.
174 Module for Analog Devices AD1889 chips.
176 ac97_quirk - AC'97 workaround for strange hardware
177 See the description of intel8x0 module for details.
179 This module supports multiple cards.
184 Module for ALi M5451 PCI chip.
186 pcm_channels - Number of hardware channels assigned for PCM
187 spdif - Support SPDIF I/O
190 This module supports one chip and autoprobe.
192 The power-management is supported.
197 Module for sound cards based on Avance Logic ALS100/ALS120 ISA chips.
199 This module supports multiple cards, autoprobe and PnP.
201 The power-management is supported.
206 Module for Avance Logic ALS300 and ALS300+
208 This module supports multiple cards.
210 The power-management is supported.
215 Module for sound cards based on Avance Logic ALS4000 PCI chip.
217 joystick_port - port # for legacy joystick support.
218 0 = disabled (default), 1 = auto-detect
220 This module supports multiple cards, autoprobe and PnP.
222 The power-management is supported.
227 Module for ATI IXP 150/200/250/400 AC97 controllers.
229 ac97_clock - AC'97 clock (default = 48000)
230 ac97_quirk - AC'97 workaround for strange hardware
231 See "AC97 Quirk Option" section below.
232 ac97_codec - Workaround to specify which AC'97 codec
233 instead of probing. If this works for you
234 file a bug with your `lspci -vn` output.
236 -1 -- Default behavior.
237 0-2 -- Use the specified codec.
238 spdif_aclink - S/PDIF transfer over AC-link (default = 1)
240 This module supports one card and autoprobe.
242 ATI IXP has two different methods to control SPDIF output. One is
243 over AC-link and another is over the "direct" SPDIF output. The
244 implementation depends on the motherboard, and you'll need to
245 choose the correct one via spdif_aclink module option.
247 The power-management is supported.
249 Module snd-atiixp-modem
250 -----------------------
252 Module for ATI IXP 150/200/250 AC97 modem controllers.
254 This module supports one card and autoprobe.
256 Note: The default index value of this module is -2, i.e. the first
259 The power-management is supported.
261 Module snd-au8810, snd-au8820, snd-au8830
262 -----------------------------------------
264 Module for Aureal Vortex, Vortex2 and Advantage device.
266 pcifix - Control PCI workarounds
267 0 = Disable all workarounds
268 1 = Force the PCI latency of the Aureal card to 0xff
269 2 = Force the Extend PCI#2 Internal Master for Efficient
270 Handling of Dummy Requests on the VIA KT133 AGP Bridge
271 3 = Force both settings
272 255 = Autodetect what is required (default)
274 This module supports all ADB PCM channels, ac97 mixer, SPDIF, hardware
275 EQ, mpu401, gameport. A3D and wavetable support are still in development.
276 Development and reverse engineering work is being coordinated at
277 http://savannah.nongnu.org/projects/openvortex/
278 SPDIF output has a copy of the AC97 codec output, unless you use the
279 "spdif" pcm device, which allows raw data passthru.
280 The hardware EQ hardware and SPDIF is only present in the Vortex2 and
283 Note: Some ALSA mixer applications don't handle the SPDIF sample rate
284 control correctly. If you have problems regarding this, try
285 another ALSA compliant mixer (alsamixer works).
290 Module for Audiowerk2 sound card
292 This module supports multiple cards.
297 Module for sound cards based on Aztech System AZT2320 ISA chip (PnP only).
299 This module supports multiple cards, PnP and autoprobe.
301 The power-management is supported.
306 Module for sound cards based on Aztech AZF3328 PCI chip.
308 joystick - Enable joystick (default off)
310 This module supports multiple cards.
315 Module for video cards based on Bt87x chips.
317 digital_rate - Override the default digital rate (Hz)
318 load_all - Load the driver even if the card model isn't known
320 This module supports multiple cards.
322 Note: The default index value of this module is -2, i.e. the first
328 Module for Creative Audigy LS and SB Live 24bit
330 This module supports multiple cards.
336 Module for sound cards based on C-Media CMI8330 ISA chips.
338 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
340 with isapnp=0, the following options are available:
342 wssport - port # for CMI8330 chip (WSS)
343 wssirq - IRQ # for CMI8330 chip (WSS)
344 wssdma - first DMA # for CMI8330 chip (WSS)
345 sbport - port # for CMI8330 chip (SB16)
346 sbirq - IRQ # for CMI8330 chip (SB16)
347 sbdma8 - 8bit DMA # for CMI8330 chip (SB16)
348 sbdma16 - 16bit DMA # for CMI8330 chip (SB16)
349 fmport - (optional) OPL3 I/O port
350 mpuport - (optional) MPU401 I/O port
351 mpuirq - (optional) MPU401 irq #
353 This module supports multiple cards and autoprobe.
355 The power-management is supported.
360 Module for C-Media CMI8338/8738/8768/8770 PCI sound cards.
362 mpu_port - port address of MIDI interface (8338 only):
363 0x300,0x310,0x320,0x330 = legacy port,
364 0 = disable (default)
365 fm_port - port address of OPL-3 FM synthesizer (8x38 only):
367 1 = integrated PCI port (default on 8738),
369 soft_ac3 - Software-conversion of raw SPDIF packets (model 033 only)
371 joystick_port - Joystick port address (0 = disable, 1 = auto-detect)
373 This module supports autoprobe and multiple cards.
375 The power-management is supported.
380 Module for sound cards based on CS4231 ISA chips.
382 port - port # for CS4231 chip
383 mpu_port - port # for MPU-401 UART (optional), -1 = disable
384 irq - IRQ # for CS4231 chip
385 mpu_irq - IRQ # for MPU-401 UART
386 dma1 - first DMA # for CS4231 chip
387 dma2 - second DMA # for CS4231 chip
389 This module supports multiple cards. This module does not support autoprobe
390 thus main port must be specified!!! Other ports are optional.
392 The power-management is supported.
397 Module for sound cards based on CS4232/CS4232A,
398 CS4235/CS4236/CS4236B/CS4237B/
399 CS4238B/CS4239 ISA chips.
401 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
403 with isapnp=0, the following options are available:
405 port - port # for CS4236 chip (PnP setup - 0x534)
406 cport - control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
407 mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
408 fm_port - FM port # for CS4236 chip (PnP setup - 0x388), -1 = disable
409 irq - IRQ # for CS4236 chip (5,7,9,11,12,15)
410 mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
411 dma1 - first DMA # for CS4236 chip (0,1,3)
412 dma2 - second DMA # for CS4236 chip (0,1,3), -1 = disable
414 This module supports multiple cards. This module does not support autoprobe
415 (if ISA PnP is not used) thus main port and control port must be
416 specified!!! Other ports are optional.
418 The power-management is supported.
420 This module is aliased as snd-cs4232 since it provides the old
421 snd-cs4232 functionality, too.
426 Module for Cirrus Logic CS4281 soundchip.
428 dual_codec - Secondary codec ID (0 = disable, default)
430 This module supports multiple cards.
432 The power-management is supported.
437 Module for PCI sound cards based on CS4610/CS4612/CS4614/CS4615/CS4622/
438 CS4624/CS4630/CS4280 PCI chips.
440 external_amp - Force to enable external amplifier.
441 thinkpad - Force to enable Thinkpad's CLKRUN control.
442 mmap_valid - Support OSS mmap mode (default = 0).
444 This module supports multiple cards and autoprobe.
445 Usually external amp and CLKRUN controls are detected automatically
446 from PCI sub vendor/device ids. If they don't work, give the options
449 The power-management is supported.
454 Module for Cyrix/NatSemi Geode 5530 chip.
456 Module snd-cs5535audio
457 ----------------------
459 Module for multifunction CS5535 companion PCI device
461 The power-management is supported.
466 Module for Creative Sound Blaster X-Fi boards (20k1 / 20k2 chips)
467 * Creative Sound Blaster X-Fi Titanium Fatal1ty Champion Series
468 * Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
469 * Creative Sound Blaster X-Fi Titanium Professional Audio
470 * Creative Sound Blaster X-Fi Titanium
471 * Creative Sound Blaster X-Fi Elite Pro
472 * Creative Sound Blaster X-Fi Platinum
473 * Creative Sound Blaster X-Fi Fatal1ty
474 * Creative Sound Blaster X-Fi XtremeGamer
475 * Creative Sound Blaster X-Fi XtremeMusic
477 reference_rate - reference sample rate, 44100 or 48000 (default)
478 multiple - multiple to ref. sample rate, 1 or 2 (default)
480 This module supports multiple cards.
485 Module for Echoaudio Darla20
487 This module supports multiple cards.
488 The driver requires the firmware loader support on kernel.
493 Module for Echoaudio Darla24
495 This module supports multiple cards.
496 The driver requires the firmware loader support on kernel.
501 Module for Diamond Technologies DT-019X / Avance Logic ALS-007 (PnP
504 This module supports multiple cards. This module is enabled only with
507 The power-management is supported.
512 Module for the dummy sound card. This "card" doesn't do any output
513 or input, but you may use this module for any application which
514 requires a sound card (like RealPlayer).
516 The power-management is supported.
521 Module for Echoaudio 3G cards (Gina3G/Layla3G)
523 This module supports multiple cards.
524 The driver requires the firmware loader support on kernel.
529 Module for EMU10K1/EMU10k2 based PCI sound cards.
530 * Sound Blaster Live!
531 * Sound Blaster PCI 512
532 * Emu APS (partially supported)
533 * Sound Blaster Audigy
535 extin - bitmap of available external inputs for FX8010 (see bellow)
536 extout - bitmap of available external outputs for FX8010 (see bellow)
537 seq_ports - allocated sequencer ports (4 by default)
538 max_synth_voices - limit of voices used for wavetable (64 by default)
539 max_buffer_size - specifies the maximum size of wavetable/pcm buffers
540 given in MB unit. Default value is 128.
541 enable_ir - enable IR
543 This module supports multiple cards and autoprobe.
545 Input & Output configurations [extin/extout]
546 * Creative Card wo/Digital out [0x0003/0x1f03]
547 * Creative Card w/Digital out [0x0003/0x1f0f]
548 * Creative Card w/Digital CD in [0x000f/0x1f0f]
549 * Creative Card wo/Digital out + LiveDrive [0x3fc3/0x1fc3]
550 * Creative Card w/Digital out + LiveDrive [0x3fc3/0x1fcf]
551 * Creative Card w/Digital CD in + LiveDrive [0x3fcf/0x1fcf]
552 * Creative Card wo/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
553 * Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
554 * Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f]
555 * Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff]
556 * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
557 * Creative Card all ins and outs [0x3fff/0x7fff]
559 The power-management is supported.
564 Module for Creative Emu10k1X (SB Live Dell OEM version)
566 This module supports multiple cards.
571 Module for Ensoniq AudioPCI ES1370 PCI sound cards.
572 * SoundBlaster PCI 64
573 * SoundBlaster PCI 128
575 joystick - Enable joystick (default off)
577 This module supports multiple cards and autoprobe.
579 The power-management is supported.
584 Module for Ensoniq AudioPCI ES1371 PCI sound cards.
585 * SoundBlaster PCI 64
586 * SoundBlaster PCI 128
587 * SoundBlaster Vibra PCI
589 joystick_port - port # for joystick (0x200,0x208,0x210,0x218),
590 0 = disable (default), 1 = auto-detect
592 This module supports multiple cards and autoprobe.
594 The power-management is supported.
599 Module for sound cards based on ESS ES968 chip (PnP only).
601 This module supports multiple cards, PnP and autoprobe.
603 The power-management is supported.
608 Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
610 port - port # for ES-1688 chip (0x220,0x240,0x260)
611 fm_port - port # for OPL3 (option; share the same port as default)
612 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
613 irq - IRQ # for ES-1688 chip (5,7,9,10)
614 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
615 dma8 - DMA # for ES-1688 chip (0,1,3)
617 This module supports multiple cards and autoprobe (without MPU-401 port).
622 Module for ESS AudioDrive ES-18xx sound cards.
624 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
626 with isapnp=0, the following options are available:
628 port - port # for ES-18xx chip (0x220,0x240,0x260)
629 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
630 fm_port - port # for FM (optional, not used)
631 irq - IRQ # for ES-18xx chip (5,7,9,10)
632 dma1 - first DMA # for ES-18xx chip (0,1,3)
633 dma2 - first DMA # for ES-18xx chip (0,1,3)
635 This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
636 port if native ISA PnP routines are not used).
637 When dma2 is equal with dma1, the driver works as half-duplex.
639 The power-management is supported.
644 Module for sound cards based on ESS Solo-1 (ES1938,ES1946) chips.
646 This module supports multiple cards and autoprobe.
648 The power-management is supported.
653 Module for sound cards based on ESS Maestro-1/2/2E (ES1968/ES1978) chips.
655 total_bufsize - total buffer size in kB (1-4096kB)
656 pcm_substreams_p - playback channels (1-8, default=2)
657 pcm_substreams_c - capture channels (1-8, default=0)
658 clock - clock (0 = auto-detection)
659 use_pm - support the power-management (0 = off, 1 = on,
661 enable_mpu - enable MPU401 (0 = off, 1 = on, 2 = auto (default))
662 joystick - enable joystick (default off)
664 This module supports multiple cards and autoprobe.
666 The power-management is supported.
671 Module for ForteMedia FM801 based PCI sound cards.
673 tea575x_tuner - Enable TEA575x tuner
674 - 1 = MediaForte 256-PCS
675 - 2 = MediaForte 256-PCPR
676 - 3 = MediaForte 64-PCR
677 - High 16-bits are video (radio) device number + 1
678 - example: 0x10002 (MediaForte 256-PCPR, device 1)
680 This module supports multiple cards and autoprobe.
682 The power-management is supported.
687 Module for Echoaudio Gina20
689 This module supports multiple cards.
690 The driver requires the firmware loader support on kernel.
695 Module for Echoaudio Gina24
697 This module supports multiple cards.
698 The driver requires the firmware loader support on kernel.
700 Module snd-gusclassic
701 ---------------------
703 Module for Gravis UltraSound Classic sound card.
705 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
706 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
707 dma1 - DMA # for GF1 chip (1,3,5,6,7)
708 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
709 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
710 voices - GF1 voices limit (14-32)
711 pcm_voices - reserved PCM voices
713 This module supports multiple cards and autoprobe.
715 Module snd-gusextreme
716 ---------------------
718 Module for Gravis UltraSound Extreme (Synergy ViperMax) sound card.
720 port - port # for ES-1688 chip (0x220,0x230,0x240,0x250,0x260)
721 gf1_port - port # for GF1 chip (0x210,0x220,0x230,0x240,0x250,0x260,0x270)
722 mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable
723 irq - IRQ # for ES-1688 chip (5,7,9,10)
724 gf1_irq - IRQ # for GF1 chip (3,5,9,11,12,15)
725 mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
726 dma8 - DMA # for ES-1688 chip (0,1,3)
727 dma1 - DMA # for GF1 chip (1,3,5,6,7)
728 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
729 voices - GF1 voices limit (14-32)
730 pcm_voices - reserved PCM voices
732 This module supports multiple cards and autoprobe (without MPU-401 port).
737 Module for Gravis UltraSound MAX sound card.
739 port - port # for GF1 chip (0x220,0x230,0x240,0x250,0x260)
740 irq - IRQ # for GF1 chip (3,5,9,11,12,15)
741 dma1 - DMA # for GF1 chip (1,3,5,6,7)
742 dma2 - DMA # for GF1 chip (1,3,5,6,7,-1=disable)
743 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
744 voices - GF1 voices limit (14-32)
745 pcm_voices - reserved PCM voices
747 This module supports multiple cards and autoprobe.
752 Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10,
754 ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620,
755 RV630, RV635, RV670, RV770,
759 [Multiple options for each card instance]
760 model - force the model name
761 position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
762 probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
763 When the bit 8 (0x100) is set, the lower 8 bits are used
764 as the "fixed" codec slots; i.e. the driver probes the
765 slots regardless what hardware reports back
766 probe_only - Only probing and no codec initialization (default=off);
767 Useful to check the initial codec status for debugging
768 bdl_pos_adj - Specifies the DMA IRQ timing delay in samples.
769 Passing -1 will make the driver to choose the appropriate
770 value based on the controller chip.
771 patch - Specifies the early "patch" files to modify the HD-audio
772 setup before initializing the codecs. This option is
773 available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
774 See HD-Audio.txt for details.
776 [Single (global) options]
777 single_cmd - Use single immediate commands to communicate with
778 codecs (for debugging only)
779 enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
780 power_save - Automatic power-saving timeout (in second, 0 =
782 power_save_controller - Reset HD-audio controller in power-saving mode
785 This module supports multiple cards and autoprobe.
787 See Documentation/sound/alsa/HD-Audio.txt for more details about
790 Each codec may have a model table for different configurations.
791 If your machine isn't listed there, the default (usually minimal)
792 configuration is set up. You can pass "model=<name>" option to
793 specify a certain model in such a case. There are different
794 models depending on the codec chip. The list of available models
795 is found in HD-Audio-Models.txt
797 The model name "genric" is treated as a special case. When this
798 model is given, the driver uses the generic codec parser without
799 "codec-patch". It's sometimes good for testing and debugging.
801 If the default configuration doesn't work and one of the above
802 matches with your device, report it together with alsa-info.sh
803 output (with --no-upload option) to kernel bugzilla or alsa-devel
804 ML (see the section "Links and Addresses").
806 power_save and power_save_controller options are for power-saving
807 mode. See powersave.txt for details.
809 Note 2: If you get click noises on output, try the module option
810 position_fix=1 or 2. position_fix=1 will use the SD_LPIB
811 register value without FIFO size correction as the current
812 DMA pointer. position_fix=2 will make the driver to use
813 the position buffer instead of reading SD_LPIB register.
814 (Usually SD_LPIB register is more accurate than the
817 NB: If you get many "azx_get_response timeout" messages at
818 loading, it's likely a problem of interrupts (e.g. ACPI irq
819 routing). Try to boot with options like "pci=noacpi". Also, you
820 can try "single_cmd=1" module option. This will switch the
821 communication method between HDA controller and codecs to the
822 single immediate commands instead of CORB/RIRB. Basically, the
823 single command mode is provided only for BIOS, and you won't get
824 unsolicited events, too. But, at least, this works independently
825 from the irq. Remember this is a last resort, and should be
826 avoided as much as possible...
828 MORE NOTES ON "azx_get_response timeout" PROBLEMS:
829 On some hardwares, you may need to add a proper probe_mask option
830 to avoid the "azx_get_response timeout" problem above, instead.
831 This occurs when the access to non-existing or non-working codec slot
832 (likely a modem one) causes a stall of the communication via HD-audio
833 bus. You can see which codec slots are probed by enabling
834 CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec
835 proc files. Then limit the slots to probe by probe_mask option.
836 For example, probe_mask=1 means to probe only the first slot, and
837 probe_mask=4 means only the third slot.
839 The power-management is supported.
844 Module for RME Hammerfall DSP audio interface(s)
846 This module supports multiple cards.
848 Note: The firmware data can be automatically loaded via hotplug
849 when CONFIG_FW_LOADER is set. Otherwise, you need to load
850 the firmware via hdsploader utility included in alsa-tools
852 The firmware data is found in alsa-firmware package.
854 Note: snd-page-alloc module does the job which snd-hammerfall-mem
855 module did formerly. It will allocate the buffers in advance
856 when any HDSP cards are found. To make the buffer
857 allocation sure, load snd-page-alloc module in the early
858 stage of boot sequence. See "Early Buffer Allocation"
864 Module for RME HDSP MADI board.
866 precise_ptr - Enable precise pointer, or disable.
867 line_outs_monitor - Send playback streams to analog outs by default.
868 enable_monitor - Enable Analog Out on Channel 63/64 by default.
870 See hdspm.txt for details.
875 Module for the MediaTek/TempoTec HiFier Fantasia sound card.
877 This module supports autoprobe and multiple cards.
882 Module for Envy24 (ICE1712) based PCI sound cards.
883 * MidiMan M Audio Delta 1010
884 * MidiMan M Audio Delta 1010LT
885 * MidiMan M Audio Delta DiO 2496
886 * MidiMan M Audio Delta 66
887 * MidiMan M Audio Delta 44
888 * MidiMan M Audio Delta 410
889 * MidiMan M Audio Audiophile 2496
895 * Hoontech SoundTrack DSP 24
896 * Hoontech SoundTrack DSP 24 Value
897 * Hoontech SoundTrack DSP 24 Media 7.1
898 * Event Electronics, EZ8
900 * Lionstracs, Mediastaton
903 model - Use the given board model, one of the following:
904 delta1010, dio2496, delta66, delta44, audiophile, delta410,
905 delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
906 dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
907 phase88, mediastation
908 omni - Omni I/O support for MidiMan M-Audio Delta44/66
909 cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transceiver)
910 in msec resolution, default value is 500 (0.5 sec)
912 This module supports multiple cards and autoprobe. Note: The consumer part
913 is not used with all Envy24 based cards (for example in the MidiMan Delta
916 Note: The supported board is detected by reading EEPROM or PCI
917 SSID (if EEPROM isn't available). You can override the
918 model by passing "model" module option in case that the
919 driver isn't configured properly or you want to try another
925 Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
926 * MidiMan M Audio Revolution 5.1
927 * MidiMan M Audio Revolution 7.1
928 * MidiMan M Audio Audiophile 192
930 * TerraTec Aureon 5.1 Sky
931 * TerraTec Aureon 7.1 Space
932 * TerraTec Aureon 7.1 Universe
935 * AudioTrak Prodigy 7.1
936 * AudioTrak Prodigy 7.1 LT
937 * AudioTrak Prodigy 7.1 XT
938 * AudioTrak Prodigy 7.1 HIFI
939 * AudioTrak Prodigy 7.1 HD2
940 * AudioTrak Prodigy 192
942 * Albatron K8X800 Pro II
952 * Hercules Fortissimo IV
953 * EGO-SYS WaveTerminal 192M
955 model - Use the given board model, one of the following:
956 revo51, revo71, amp2000, prodigy71, prodigy71lt,
957 prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192,
958 juli, aureon51, aureon71, universe, ap192, k8x800,
959 phase22, phase28, ms300, av710, se200pci, se90pci,
960 fortissimo4, sn25p, WT192M, maya44
962 This module supports multiple cards and autoprobe.
964 Note: The supported board is detected by reading EEPROM or PCI
965 SSID (if EEPROM isn't available). You can override the
966 model by passing "model" module option in case that the
967 driver isn't configured properly or you want to try another
973 Module for Echoaudio Indigo
975 This module supports multiple cards.
976 The driver requires the firmware loader support on kernel.
981 Module for Echoaudio Indigo DJ
983 This module supports multiple cards.
984 The driver requires the firmware loader support on kernel.
989 Module for Echoaudio Indigo IO
991 This module supports multiple cards.
992 The driver requires the firmware loader support on kernel.
997 Module for AC'97 motherboards from Intel and compatibles.
998 * Intel i810/810E, i815, i820, i830, i84x, MX440
999 ICH5, ICH6, ICH7, 6300ESB, ESB2
1000 * SiS 7012 (SiS 735)
1001 * NVidia NForce, NForce2, NForce3, MCP04, CK804
1003 * AMD AMD768, AMD8111
1006 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1007 ac97_quirk - AC'97 workaround for strange hardware
1008 See "AC97 Quirk Option" section below.
1009 buggy_irq - Enable workaround for buggy interrupts on some
1010 motherboards (default yes on nForce chips,
1012 buggy_semaphore - Enable workaround for hardwares with buggy
1013 semaphores (e.g. on some ASUS laptops)
1015 spdif_aclink - Use S/PDIF over AC-link instead of direct connection
1016 from the controller chip
1017 (0 = off, 1 = on, -1 = default)
1019 This module supports one chip and autoprobe.
1021 Note: the latest driver supports auto-detection of chip clock.
1022 if you still encounter too fast playback, specify the clock
1023 explicitly via the module option "ac97_clock=41194".
1025 Joystick/MIDI ports are not supported by this driver. If your
1026 motherboard has these devices, use the ns558 or snd-mpu401
1027 modules, respectively.
1029 The power-management is supported.
1031 Module snd-intel8x0m
1032 --------------------
1034 Module for Intel ICH (i8x0) chipset MC97 modems.
1035 * Intel i810/810E, i815, i820, i830, i84x, MX440
1037 * SiS 7013 (SiS 735)
1038 * NVidia NForce, NForce2, NForce2s, NForce3
1042 ac97_clock - AC'97 codec clock base (0 = auto-detect)
1044 This module supports one card and autoprobe.
1046 Note: The default index value of this module is -2, i.e. the first
1049 The power-management is supported.
1051 Module snd-interwave
1052 --------------------
1054 Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
1055 and other sound cards based on AMD InterWave (tm) chip.
1057 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1058 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1059 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1060 effect - 1 = InterWave effects enable (default 0);
1062 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1064 with isapnp=0, the following options are available:
1066 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1067 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1068 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1069 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1071 This module supports multiple cards, autoprobe and ISA PnP.
1073 Module snd-interwave-stb
1074 ------------------------
1076 Module for UltraSound 32-Pro (sound card from STB used by Compaq)
1077 and other sound cards based on AMD InterWave (tm) chip with TEA6330T
1078 circuit for extended control of bass, treble and master volume.
1080 joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
1081 midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
1082 pcm_voices - reserved PCM voices for the synthesizer (default 2)
1083 effect - 1 = InterWave effects enable (default 0);
1085 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1087 with isapnp=0, the following options are available:
1089 port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
1090 port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
1091 irq - IRQ # for InterWave chip (3,5,9,11,12,15)
1092 dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
1093 dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
1095 This module supports multiple cards, autoprobe and ISA PnP.
1100 Module for Korg 1212 IO PCI card
1102 This module supports multiple cards.
1107 Module for Echoaudio Layla20
1109 This module supports multiple cards.
1110 The driver requires the firmware loader support on kernel.
1115 Module for Echoaudio Layla24
1117 This module supports multiple cards.
1118 The driver requires the firmware loader support on kernel.
1123 Module for Digigram LX6464ES boards
1125 This module supports multiple cards.
1130 Module for Allegro/Maestro3 chips
1132 external_amp - enable external amp (enabled by default)
1133 amp_gpio - GPIO pin number for external amp (0-15) or
1134 -1 for default pin (8 for allegro, 1 for
1137 This module supports autoprobe and multiple chips.
1139 Note: the binding of amplifier is dependent on hardware.
1140 If there is no sound even though all channels are unmuted, try to
1141 specify other gpio connection via amp_gpio option.
1142 For example, a Panasonic notebook might need "amp_gpio=0x0d"
1145 The power-management is supported.
1150 Module for Echoaudio Mia
1152 This module supports multiple cards.
1153 The driver requires the firmware loader support on kernel.
1158 Module for Miro soundcards: miroSOUND PCM 1 pro,
1160 miroSOUND PCM 20 Radio.
1162 port - Port # (0x530,0x604,0xe80,0xf40)
1163 irq - IRQ # (5,7,9,10,11)
1164 dma1 - 1st dma # (0,1,3)
1165 dma2 - 2nd dma # (0,1)
1166 mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
1167 mpu_irq - MPU-401 irq # (5,7,9,10)
1168 fm_port - FM Port # (0x388)
1169 wss - enable WSS mode
1170 ide - enable onboard ide support
1175 Module for Digigram miXart8 sound cards.
1177 This module supports multiple cards.
1178 Note: One miXart8 board will be represented as 4 alsa cards.
1179 See MIXART.txt for details.
1181 When the driver is compiled as a module and the hotplug firmware
1182 is supported, the firmware data is loaded via hotplug automatically.
1183 Install the necessary firmware files in alsa-firmware package.
1184 When no hotplug fw loader is available, you need to load the
1185 firmware via mixartloader utility in alsa-tools package.
1190 Module for Echoaudio Mona
1192 This module supports multiple cards.
1193 The driver requires the firmware loader support on kernel.
1198 Module for MPU-401 UART devices.
1200 port - port number or -1 (disable)
1201 irq - IRQ number or -1 (disable)
1202 pnp - PnP detection - 0 = disable, 1 = enable (default)
1204 This module supports multiple devices and PnP.
1206 Module snd-msnd-classic
1207 -----------------------
1209 Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
1212 io - Port # for msnd-classic card
1213 irq - IRQ # for msnd-classic card
1214 mem - Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
1216 write_ndelay - enable write ndelay (default = 1)
1217 calibrate_signal - calibrate signal (default = 0)
1218 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1219 digital - Digital daughterboard present (default = 0)
1220 cfg - Config port (0x250, 0x260 or 0x270) default = PnP
1221 reset - Reset all devices
1222 mpu_io - MPU401 I/O port
1223 mpu_irq - MPU401 irq#
1224 ide_io0 - IDE port #0
1225 ide_io1 - IDE port #1
1227 joystick_io - Joystick I/O port
1229 The driver requires firmware files "turtlebeach/msndinit.bin" and
1230 "turtlebeach/msndperm.bin" in the proper firmware directory.
1232 See Documentation/sound/oss/MultiSound for important information
1233 about this driver. Note that it has been discontinued, but the
1234 Voyetra Turtle Beach knowledge base entry for it is still available
1236 http://www.turtlebeach.com/site/kb_ftp/790.asp
1238 Module snd-msnd-pinnacle
1239 ------------------------
1241 Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
1243 io - Port # for pinnacle/fiji card
1244 irq - IRQ # for pinnalce/fiji card
1245 mem - Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
1247 write_ndelay - enable write ndelay (default = 1)
1248 calibrate_signal - calibrate signal (default = 0)
1249 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1251 The driver requires firmware files "turtlebeach/pndspini.bin" and
1252 "turtlebeach/pndsperm.bin" in the proper firmware directory.
1257 Module for MOTU MidiTimePiece AV multiport MIDI (on the parallel
1260 port - I/O port # for MTPAV (0x378,0x278, default=0x378)
1261 irq - IRQ # for MTPAV (7,5, default=7)
1262 hwports - number of supported hardware ports, default=8.
1264 Module supports only 1 card. This module has no enable option.
1269 Module for Ego Systems (ESI) Miditerminal 4140
1271 This module supports multiple devices.
1272 Requires parport (CONFIG_PARPORT).
1277 Module for NeoMagic NM256AV/ZX chips
1279 playback_bufsize - max playback frame size in kB (4-128kB)
1280 capture_bufsize - max capture frame size in kB (4-128kB)
1281 force_ac97 - 0 or 1 (disabled by default)
1282 buffer_top - specify buffer top address
1283 use_cache - 0 or 1 (disabled by default)
1284 vaio_hack - alias buffer_top=0x25a800
1285 reset_workaround - enable AC97 RESET workaround for some laptops
1286 reset_workaround2 - enable extended AC97 RESET workaround for some
1289 This module supports one chip and autoprobe.
1291 The power-management is supported.
1293 Note: on some notebooks the buffer address cannot be detected
1294 automatically, or causes hang-up during initialization.
1295 In such a case, specify the buffer top address explicitly via
1296 the buffer_top option.
1298 Sony F250: buffer_top=0x25a800
1299 Sony F270: buffer_top=0x272800
1300 The driver supports only ac97 codec. It's possible to force
1301 to initialize/use ac97 although it's not detected. In such a
1302 case, use force_ac97=1 option - but *NO* guarantee whether it
1305 Note: The NM256 chip can be linked internally with non-AC97
1306 codecs. This driver supports only the AC97 codec, and won't work
1307 with machines with other (most likely CS423x or OPL3SAx) chips,
1308 even though the device is detected in lspci. In such a case, try
1309 other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
1310 but some doesn't have ISA PnP. You'll need to specify isapnp=0
1311 and proper hardware parameters in the case without ISA PnP.
1313 Note: some laptops need a workaround for AC97 RESET. For the
1314 known hardware like Dell Latitude LS and Sony PCG-F305, this
1315 workaround is enabled automatically. For other laptops with a
1316 hard freeze, you can try reset_workaround=1 option.
1318 Note: Dell Latitude CSx laptops have another problem regarding
1319 AC97 RESET. On these laptops, reset_workaround2 option is
1320 turned on as default. This option is worth to try if the
1321 previous reset_workaround option doesn't help.
1323 Note: This driver is really crappy. It's a porting from the
1324 OSS driver, which is a result of black-magic reverse engineering.
1325 The detection of codec will fail if the driver is loaded *after*
1326 X-server as described above. You might be able to force to load
1327 the module, but it may result in hang-up. Hence, make sure that
1328 you load this module *before* X if you encounter this kind of
1334 Module for Yamaha OPL3-SA2/SA3 sound cards.
1336 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1338 with isapnp=0, the following options are available:
1340 port - control port # for OPL3-SA chip (0x370)
1341 sb_port - SB port # for OPL3-SA chip (0x220,0x240)
1342 wss_port - WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
1343 midi_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1344 fm_port - FM port # for OPL3-SA chip (0x388), -1 = disable
1345 irq - IRQ # for OPL3-SA chip (5,7,9,10)
1346 dma1 - first DMA # for Yamaha OPL3-SA chip (0,1,3)
1347 dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
1349 This module supports multiple cards and ISA PnP. It does not support
1350 autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
1352 The power-management is supported.
1354 Module snd-opti92x-ad1848
1355 -------------------------
1357 Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
1358 Module works with OAK Mozart cards as well.
1360 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1362 with isapnp=0, the following options are available:
1364 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1365 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1366 fm_port - port # for OPL3 device (0x388)
1367 irq - IRQ # for WSS chip (5,7,9,10,11)
1368 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1369 dma1 - first DMA # for WSS chip (0,1,3)
1371 This module supports only one card, autoprobe and PnP.
1373 Module snd-opti92x-cs4231
1374 -------------------------
1376 Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
1378 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1380 with isapnp=0, the following options are available:
1382 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1383 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1384 fm_port - port # for OPL3 device (0x388)
1385 irq - IRQ # for WSS chip (5,7,9,10,11)
1386 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1387 dma1 - first DMA # for WSS chip (0,1,3)
1388 dma2 - second DMA # for WSS chip (0,1,3)
1390 This module supports only one card, autoprobe and PnP.
1395 Module for sound cards based on OPTi 82c93x chips.
1397 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1399 with isapnp=0, the following options are available:
1401 port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
1402 mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
1403 fm_port - port # for OPL3 device (0x388)
1404 irq - IRQ # for WSS chip (5,7,9,10,11)
1405 mpu_irq - IRQ # for MPU-401 UART (5,7,9,10)
1406 dma1 - first DMA # for WSS chip (0,1,3)
1407 dma2 - second DMA # for WSS chip (0,1,3)
1409 This module supports only one card, autoprobe and PnP.
1414 Module for sound cards based on the C-Media CMI8788 chip:
1416 * AuzenTech X-Meridian
1418 * Club3D Theatron DTS
1419 * HT-Omega Claro (plus)
1420 * HT-Omega Claro halo (XT)
1421 * Razer Barracuda AC-1
1424 This module supports autoprobe and multiple cards.
1429 Module for internal PC-Speaker.
1431 nforce_wa - enable NForce chipset workaround. Expect bad sound.
1433 This module supports system beeps, some kind of PCM playback and
1434 even a few mixer controls.
1439 Module for Digigram PCXHR boards
1441 This module supports multiple cards.
1443 Module snd-portman2x4
1444 ---------------------
1446 Module for Midiman Portman 2x4 parallel port MIDI interface
1448 This module supports multiple cards.
1450 Module snd-powermac (on ppc only)
1451 ---------------------------------
1453 Module for PowerMac, iMac and iBook on-board soundchips
1455 enable_beep - enable beep using PCM (enabled as default)
1457 Module supports autoprobe a chip.
1459 Note: the driver may have problems regarding endianess.
1461 The power-management is supported.
1463 Module snd-pxa2xx-ac97 (on arm only)
1464 ------------------------------------
1466 Module for AC97 driver for the Intel PXA2xx chip
1468 For ARM architecture only.
1470 The power-management is supported.
1475 Module for Conexant Riptide chip
1477 joystick_port - Joystick port # (default: 0x200)
1478 mpu_port - MPU401 port # (default: 0x330)
1479 opl3_port - OPL3 port # (default: 0x388)
1481 This module supports multiple cards.
1482 The driver requires the firmware loader support on kernel.
1483 You need to install the firmware file "riptide.hex" to the standard
1484 firmware path (e.g. /lib/firmware).
1489 Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32,
1490 Prodif96 and Prodif Gold) sound cards.
1492 This module supports multiple cards.
1497 Module for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST sound cards.
1499 This module supports multiple cards.
1504 Module for RME Digi9652 (Hammerfall, Hammerfall-Light) sound cards.
1506 precise_ptr - Enable precise pointer (doesn't work reliably).
1509 This module supports multiple cards.
1511 Note: snd-page-alloc module does the job which snd-hammerfall-mem
1512 module did formerly. It will allocate the buffers in advance
1513 when any RME9652 cards are found. To make the buffer
1514 allocation sure, load snd-page-alloc module in the early
1515 stage of boot sequence. See "Early Buffer Allocation"
1518 Module snd-sa11xx-uda1341 (on arm only)
1519 ---------------------------------------
1521 Module for Philips UDA1341TS on Compaq iPAQ H3600 sound card.
1523 Module supports only one card.
1524 Module has no enable and index options.
1526 The power-management is supported.
1531 Module for 8-bit SoundBlaster cards: SoundBlaster 1.0,
1535 port - port # for SB DSP chip (0x220,0x240,0x260)
1536 irq - IRQ # for SB DSP chip (5,7,9,10)
1537 dma8 - DMA # for SB DSP chip (1,3)
1539 This module supports multiple cards and autoprobe.
1541 The power-management is supported.
1543 Module snd-sb16 and snd-sbawe
1544 -----------------------------
1546 Module for 16-bit SoundBlaster cards: SoundBlaster 16 (PnP),
1547 SoundBlaster AWE 32 (PnP),
1548 SoundBlaster AWE 64 PnP
1550 mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
1551 csp - ASP/CSP chip support - 0 = disable (default), 1 = enable
1552 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1554 with isapnp=0, the following options are available:
1556 port - port # for SB DSP 4.x chip (0x220,0x240,0x260)
1557 mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
1558 awe_port - base port # for EMU8000 synthesizer (0x620,0x640,0x660)
1559 (snd-sbawe module only)
1560 irq - IRQ # for SB DSP 4.x chip (5,7,9,10)
1561 dma8 - 8-bit DMA # for SB DSP 4.x chip (0,1,3)
1562 dma16 - 16-bit DMA # for SB DSP 4.x chip (5,6,7)
1564 This module supports multiple cards, autoprobe and ISA PnP.
1566 Note: To use Vibra16X cards in 16-bit half duplex mode, you must
1567 disable 16bit DMA with dma16 = -1 module parameter.
1568 Also, all Sound Blaster 16 type cards can operate in 16-bit
1569 half duplex mode through 8-bit DMA channel by disabling their
1572 The power-management is supported.
1577 Module for Gallant SC-6000 soundcard and later models: SC-6600
1580 port - Port # (0x220 or 0x240)
1581 mss_port - MSS Port # (0x530 or 0xe80)
1582 irq - IRQ # (5,7,9,10,11)
1583 mpu_irq - MPU-401 IRQ # (5,7,9,10) ,0 - no MPU-401 irq
1585 joystick - Enable gameport - 0 = disable (default), 1 = enable
1587 This module supports multiple cards.
1589 This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
1594 Module for Aztech Sound Galaxy sound card.
1596 sbport - Port # for SB16 interface (0x220,0x240)
1597 wssport - Port # for WSS interface (0x530,0xe80,0xf40,0x604)
1598 irq - IRQ # (7,9,10,11)
1601 This module supports multiple cards.
1603 The power-management is supported.
1608 Module for ENSONIQ SoundScape PnP cards.
1610 port - Port # (PnP setup)
1611 wss_port - WSS Port # (PnP setup)
1612 irq - IRQ # (PnP setup)
1613 mpu_irq - MPU-401 IRQ # (PnP setup)
1614 dma - DMA # (PnP setup)
1615 dma2 - 2nd DMA # (PnP setup, -1 to disable)
1617 This module supports multiple cards. ISA PnP must be enabled.
1618 You need sscape_ctl tool in alsa-tools package for loading
1621 Module snd-sun-amd7930 (on sparc only)
1622 --------------------------------------
1624 Module for AMD7930 sound chips found on Sparcs.
1626 This module supports multiple cards.
1628 Module snd-sun-cs4231 (on sparc only)
1629 -------------------------------------
1631 Module for CS4231 sound chips found on Sparcs.
1633 This module supports multiple cards.
1635 Module snd-sun-dbri (on sparc only)
1636 -----------------------------------
1638 Module for DBRI sound chips found on Sparcs.
1640 This module supports multiple cards.
1642 Module snd-wavefront
1643 --------------------
1645 Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
1647 use_cs4232_midi - Use CS4232 MPU-401 interface
1648 (inaccessibly located inside your computer)
1649 isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
1651 with isapnp=0, the following options are available:
1653 cs4232_pcm_port - Port # for CS4232 PCM interface.
1654 cs4232_pcm_irq - IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
1655 cs4232_mpu_port - Port # for CS4232 MPU-401 interface.
1656 cs4232_mpu_irq - IRQ # for CS4232 MPU-401 interface (9,11,12,15).
1657 ics2115_port - Port # for ICS2115
1658 ics2115_irq - IRQ # for ICS2115
1659 fm_port - FM OPL-3 Port #
1660 dma1 - DMA1 # for CS4232 PCM interface.
1661 dma2 - DMA2 # for CS4232 PCM interface.
1663 The below are options for wavefront_synth features:
1664 wf_raw - Assume that we need to boot the OS (default:no)
1665 If yes, then during driver loading, the state of the board is
1666 ignored, and we reset the board and load the firmware anyway.
1667 fx_raw - Assume that the FX process needs help (default:yes)
1668 If false, we'll leave the FX processor in whatever state it is
1669 when the driver is loaded. The default is to download the
1670 microprogram and associated coefficients to set it up for
1671 "default" operation, whatever that means.
1672 debug_default - Debug parameters for card initialization
1673 wait_usecs - How long to wait without sleeping, usecs
1675 This magic number seems to give pretty optimal throughput
1676 based on my limited experimentation.
1677 If you want to play around with it and find a better value, be
1678 my guest. Remember, the idea is to get a number that causes us
1679 to just busy wait for as many WaveFront commands as possible,
1680 without coming up with a number so large that we hog the whole
1682 Specifically, with this number, out of about 134,000 status
1683 waits, only about 250 result in a sleep.
1684 sleep_interval - How long to sleep when waiting for reply
1686 sleep_tries - How many times to try sleeping during a wait
1688 ospath - Pathname to processed ICS2115 OS firmware
1689 (default:wavefront.os)
1690 The path name of the ISC2115 OS firmware. In the recent
1691 version, it's handled via firmware loader framework, so it
1692 must be installed in the proper path, typically,
1694 reset_time - How long to wait for a reset to take effect
1696 ramcheck_time - How many seconds to wait for the RAM test
1698 osrun_time - How many seconds to wait for the ICS2115 OS
1701 This module supports multiple cards and ISA PnP.
1703 Note: the firmware file "wavefront.os" was located in the earlier
1704 version in /etc. Now it's loaded via firmware loader, and
1705 must be in the proper firmware path, such as /lib/firmware.
1706 Copy (or symlink) the file appropriately if you get an error
1707 regarding firmware downloading after upgrading the kernel.
1709 Module snd-sonicvibes
1710 ---------------------
1712 Module for S3 SonicVibes PCI sound cards.
1713 * PINE Schubert 32 PCI
1715 reverb - Reverb Enable - 1 = enable, 0 = disable (default)
1716 - SoundCard must have onboard SRAM for this.
1717 mge - Mic Gain Enable - 1 = enable, 0 = disable (default)
1719 This module supports multiple cards and autoprobe.
1721 Module snd-serial-u16550
1722 ------------------------
1724 Module for UART16550A serial MIDI ports.
1726 port - port # for UART16550A chip
1727 irq - IRQ # for UART16550A chip, -1 = poll mode
1728 speed - speed in bauds (9600,19200,38400,57600,115200)
1730 base - base for divisor in bauds (57600,115200,230400,460800)
1732 outs - number of MIDI ports in a serial port (1-4)
1734 adaptor - Type of adaptor.
1735 0 = Soundcanvas, 1 = MS-124T, 2 = MS-124W S/A,
1736 3 = MS-124W M/B, 4 = Generic
1738 This module supports multiple cards. This module does not support autoprobe
1739 thus the main port must be specified!!! Other options are optional.
1744 Module for Trident 4DWave DX/NX sound cards.
1745 * Best Union Miss Melody 4DWave PCI
1747 * Warpspeed ONSpeed 4DWave PCI
1750 * CHIC True Sound 4Dwave
1751 * Shark Predator4D-PCI
1752 * Jaton SonicWave 4D
1753 * SiS SI7018 PCI Audio
1754 * Hoontech SoundTrack Digital 4DWave NX
1756 pcm_channels - max channels (voices) reserved for PCM
1757 wavetable_size - max wavetable size in kB (4-?kb)
1759 This module supports multiple cards and autoprobe.
1761 The power-management is supported.
1763 Module snd-usb-audio
1764 --------------------
1766 Module for USB audio and USB MIDI devices.
1768 vid - Vendor ID for the device (optional)
1769 pid - Product ID for the device (optional)
1770 nrpacks - Max. number of packets per URB (default: 8)
1771 async_unlink - Use async unlink mode (default: yes)
1772 device_setup - Device specific magic number (optional)
1773 - Influence depends on the device
1775 ignore_ctl_error - Ignore any USB-controller regarding mixer
1776 interface (default: no)
1778 This module supports multiple devices, autoprobe and hotplugging.
1780 NB: nrpacks parameter can be modified dynamically via sysfs.
1781 Don't put the value over 20. Changing via sysfs has no sanity
1783 NB: async_unlink=0 would cause Oops. It remains just for
1784 debugging purpose (if any).
1785 NB: ignore_ctl_error=1 may help when you get an error at accessing
1786 the mixer element such as URB error -22. This happens on some
1787 buggy USB device or the controller.
1789 Module snd-usb-caiaq
1790 --------------------
1792 Module for caiaq UB audio interfaces,
1793 * Native Instruments RigKontrol2
1794 * Native Instruments Kore Controller
1795 * Native Instruments Audio Kontrol 1
1796 * Native Instruments Audio 8 DJ
1798 This module supports multiple devices, autoprobe and hotplugging.
1800 Module snd-usb-usx2y
1801 --------------------
1803 Module for Tascam USB US-122, US-224 and US-428 devices.
1805 This module supports multiple devices, autoprobe and hotplugging.
1807 Note: you need to load the firmware via usx2yloader utility included
1808 in alsa-tools and alsa-firmware packages.
1813 Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
1814 8233A, 8233C, 8235, 8237 (south) bridge.
1816 mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
1818 joystick - Enable joystick (default off) [VIA686A/686B only]
1819 ac97_clock - AC'97 codec clock base (default 48000Hz)
1820 dxs_support - support DXS channels,
1821 0 = auto (default), 1 = enable, 2 = disable,
1822 3 = 48k only, 4 = no VRA, 5 = enable any sample
1823 rate and different sample rates on different
1825 [VIA8233/C, 8235, 8237 only]
1826 ac97_quirk - AC'97 workaround for strange hardware
1827 See "AC97 Quirk Option" section below.
1829 This module supports one chip and autoprobe.
1831 Note: on some SMP motherboards like MSI 694D the interrupts might
1832 not be generated properly. In such a case, please try to
1833 set the SMP (or MPS) version on BIOS to 1.1 instead of
1834 default value 1.4. Then the interrupt number will be
1835 assigned under 15. You might also upgrade your BIOS.
1837 Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
1838 channels as the first PCM. On these channels, up to 4
1839 streams can be played at the same time, and the controller
1840 can perform sample rate conversion with separate rates for
1842 As default (dxs_support = 0), 48k fixed rate is chosen
1843 except for the known devices since the output is often
1844 noisy except for 48k on some mother boards due to the
1846 Please try once dxs_support=5 and if it works on other
1847 sample rates (e.g. 44.1kHz of mp3 playback), please let us
1848 know the PCI subsystem vendor/device id's (output of
1850 If dxs_support=5 does not work, try dxs_support=4; if it
1851 doesn't work too, try dxs_support=1. (dxs_support=1 is
1852 usually for old motherboards. The correct implemented
1853 board should work with 4 or 5.) If it still doesn't
1854 work and the default setting is ok, dxs_support=3 is the
1855 right choice. If the default setting doesn't work at all,
1856 try dxs_support=2 to disable the DXS channels.
1857 In any cases, please let us know the result and the
1858 subsystem vendor/device ids. See "Links and Addresses"
1861 Note: for the MPU401 on VIA823x, use snd-mpu401 driver
1862 additionally. The mpu_port option is for VIA686 chips only.
1864 The power-management is supported.
1866 Module snd-via82xx-modem
1867 ------------------------
1869 Module for VIA82xx AC97 modem
1871 ac97_clock - AC'97 codec clock base (default 48000Hz)
1873 This module supports one card and autoprobe.
1875 Note: The default index value of this module is -2, i.e. the first
1878 The power-management is supported.
1883 Module for virtual rawmidi devices.
1884 This module creates virtual rawmidi devices which communicate
1885 to the corresponding ALSA sequencer ports.
1887 midi_devs - MIDI devices # (1-4, default=4)
1889 This module supports multiple cards.
1894 Module for sound cards based on the Asus AV100/AV200 chips,
1895 i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
1896 (Deluxe) and Essence STX.
1898 This module supports autoprobe and multiple cards.
1903 Module for Digigram VX-Pocket VX222, V222 v2 and Mic cards.
1905 mic - Enable Microphone on V222 Mic (NYI)
1906 ibl - Capture IBL size. (default = 0, minimum size)
1908 This module supports multiple cards.
1910 When the driver is compiled as a module and the hotplug firmware
1911 is supported, the firmware data is loaded via hotplug automatically.
1912 Install the necessary firmware files in alsa-firmware package.
1913 When no hotplug fw loader is available, you need to load the
1914 firmware via vxloader utility in alsa-tools package. To invoke
1915 vxloader automatically, add the following to /etc/modprobe.conf
1917 install snd-vx222 /sbin/modprobe --first-time -i snd-vx222 && /usr/bin/vxloader
1919 (for 2.2/2.4 kernels, add "post-install /usr/bin/vxloader" to
1920 /etc/modules.conf, instead.)
1921 IBL size defines the interrupts period for PCM. The smaller size
1922 gives smaller latency but leads to more CPU consumption, too.
1923 The size is usually aligned to 126. As default (=0), the smallest
1924 size is chosen. The possible IBL values can be found in
1925 /proc/asound/cardX/vx-status proc file.
1927 The power-management is supported.
1932 Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
1934 ibl - Capture IBL size. (default = 0, minimum size)
1936 This module supports multiple cards. The module is compiled only when
1937 PCMCIA is supported on kernel.
1939 With the older 2.6.x kernel, to activate the driver via the card
1940 manager, you'll need to set up /etc/pcmcia/vxpocket.conf. See the
1941 sound/pcmcia/vx/vxpocket.c. 2.6.13 or later kernel requires no
1942 longer require a config file.
1944 When the driver is compiled as a module and the hotplug firmware
1945 is supported, the firmware data is loaded via hotplug automatically.
1946 Install the necessary firmware files in alsa-firmware package.
1947 When no hotplug fw loader is available, you need to load the
1948 firmware via vxloader utility in alsa-tools package.
1950 About capture IBL, see the description of snd-vx222 module.
1952 Note: snd-vxp440 driver is merged to snd-vxpocket driver since
1955 The power-management is supported.
1960 Module for Yamaha PCI chips (YMF72x, YMF74x & YMF75x).
1962 mpu_port - 0x300,0x330,0x332,0x334, 0 (disable) by default,
1963 1 (auto-detect for YMF744/754 only)
1964 fm_port - 0x388,0x398,0x3a0,0x3a8, 0 (disable) by default
1965 1 (auto-detect for YMF744/754 only)
1966 joystick_port - 0x201,0x202,0x204,0x205, 0 (disable) by default,
1968 rear_switch - enable shared rear/line-in switch (bool)
1970 This module supports autoprobe and multiple chips.
1972 The power-management is supported.
1974 Module snd-pdaudiocf
1975 --------------------
1977 Module for Sound Core PDAudioCF sound card.
1979 The power-management is supported.
1985 The ac97_quirk option is used to enable/override the workaround for
1986 specific devices on drivers for on-board AC'97 controllers like
1987 snd-intel8x0. Some hardware have swapped output pins between Master
1988 and Headphone, or Surround (thanks to confusion of AC'97
1989 specifications from version to version :-)
1991 The driver provides the auto-detection of known problematic devices,
1992 but some might be unknown or wrongly detected. In such a case, pass
1993 the proper value with this option.
1995 The following strings are accepted:
1996 - default Don't override the default setting
1997 - none Disable the quirk
1998 - hp_only Bind Master and Headphone controls as a single control
1999 - swap_hp Swap headphone and master controls
2000 - swap_surround Swap master and surround controls
2001 - ad_sharing For AD1985, turn on OMS bit and use headphone
2002 - alc_jack For ALC65x, turn on the jack sense mode
2003 - inv_eapd Inverted EAPD implementation
2004 - mute_led Bind EAPD bit for turning on/off mute LED
2006 For backward compatibility, the corresponding integer value -1, 0,
2007 ... are accepted, too.
2009 For example, if "Master" volume control has no effect on your device
2010 but only "Headphone" does, pass ac97_quirk=hp_only module option.
2013 Configuring Non-ISAPNP Cards
2014 ============================
2016 When the kernel is configured with ISA-PnP support, the modules
2017 supporting the isapnp cards will have module options "isapnp".
2018 If this option is set, *only* the ISA-PnP devices will be probed.
2019 For probing the non ISA-PnP cards, you have to pass "isapnp=0" option
2020 together with the proper i/o and irq configuration.
2022 When the kernel is configured without ISA-PnP support, isapnp option
2023 will be not built in.
2026 Module Autoloading Support
2027 ==========================
2029 The ALSA drivers can be loaded automatically on demand by defining
2030 module aliases. The string 'snd-card-%1' is requested for ALSA native
2031 devices where %i is sound card number from zero to seven.
2033 To auto-load an ALSA driver for OSS services, define the string
2034 'sound-slot-%i' where %i means the slot number for OSS, which
2035 corresponds to the card index of ALSA. Usually, define this
2036 as the same card module.
2038 An example configuration for a single emu10k1 card is like below:
2039 ----- /etc/modprobe.conf
2040 alias snd-card-0 snd-emu10k1
2041 alias sound-slot-0 snd-emu10k1
2042 ----- /etc/modprobe.conf
2044 The available number of auto-loaded sound cards depends on the module
2045 option "cards_limit" of snd module. As default it's set to 1.
2046 To enable the auto-loading of multiple cards, specify the number of
2047 sound cards in that option.
2049 When multiple cards are available, it'd better to specify the index
2050 number for each card via module option, too, so that the order of
2051 cards is kept consistent.
2053 An example configuration for two sound cards is like below:
2055 ----- /etc/modprobe.conf
2057 options snd cards_limit=2
2058 alias snd-card-0 snd-interwave
2059 alias snd-card-1 snd-ens1371
2060 options snd-interwave index=0
2061 options snd-ens1371 index=1
2063 alias sound-slot-0 snd-interwave
2064 alias sound-slot-1 snd-ens1371
2065 ----- /etc/modprobe.conf
2067 In this example, the interwave card is always loaded as the first card
2068 (index 0) and ens1371 as the second (index 1).
2070 Alternative (and new) way to fixate the slot assignment is to use
2071 "slots" option of snd module. In the case above, specify like the
2074 options snd slots=snd-interwave,snd-ens1371
2076 Then, the first slot (#0) is reserved for snd-interwave driver, and
2077 the second (#1) for snd-ens1371. You can omit index option in each
2078 driver if slots option is used (although you can still have them at
2079 the same time as long as they don't conflict).
2081 The slots option is especially useful for avoiding the possible
2082 hot-plugging and the resultant slot conflict. For example, in the
2083 case above again, the first two slots are already reserved. If any
2084 other driver (e.g. snd-usb-audio) is loaded before snd-interwave or
2085 snd-ens1371, it will be assigned to the third or later slot.
2087 When a module name is given with '!', the slot will be given for any
2088 modules but that name. For example, "slots=!snd-pcsp" will reserve
2089 the first slot for any modules but snd-pcsp.
2092 ALSA PCM devices to OSS devices mapping
2093 =======================================
2095 /dev/snd/pcmC0D0[c|p] -> /dev/audio0 (/dev/audio) -> minor 4
2096 /dev/snd/pcmC0D0[c|p] -> /dev/dsp0 (/dev/dsp) -> minor 3
2097 /dev/snd/pcmC0D1[c|p] -> /dev/adsp0 (/dev/adsp) -> minor 12
2098 /dev/snd/pcmC1D0[c|p] -> /dev/audio1 -> minor 4+16 = 20
2099 /dev/snd/pcmC1D0[c|p] -> /dev/dsp1 -> minor 3+16 = 19
2100 /dev/snd/pcmC1D1[c|p] -> /dev/adsp1 -> minor 12+16 = 28
2101 /dev/snd/pcmC2D0[c|p] -> /dev/audio2 -> minor 4+32 = 36
2102 /dev/snd/pcmC2D0[c|p] -> /dev/dsp2 -> minor 3+32 = 39
2103 /dev/snd/pcmC2D1[c|p] -> /dev/adsp2 -> minor 12+32 = 44
2105 The first number from /dev/snd/pcmC{X}D{Y}[c|p] expression means
2106 sound card number and second means device number. The ALSA devices
2107 have either 'c' or 'p' suffix indicating the direction, capture and
2108 playback, respectively.
2110 Please note that the device mapping above may be varied via the module
2111 options of snd-pcm-oss module.
2114 Proc interfaces (/proc/asound)
2115 ==============================
2117 /proc/asound/card#/pcm#[cp]/oss
2118 -------------------------------
2119 String "erase" - erase all additional informations about OSS applications
2120 String "<app_name> <fragments> <fragment_size> [<options>]"
2122 <app_name> - name of application with (higher priority) or without path
2123 <fragments> - number of fragments or zero if auto
2124 <fragment_size> - size of fragment in bytes or zero if auto
2125 <options> - optional parameters
2126 - disable the application tries to open a pcm device for
2127 this channel but does not want to use it.
2128 (Cause a bug or mmap needs)
2129 It's good for Quake etc...
2130 - direct don't use plugins
2131 - block force block mode (rvplayer)
2132 - non-block force non-block mode
2133 - whole-frag write only whole fragments (optimization affecting
2135 - no-silence do not fill silence ahead to avoid clicks
2136 - buggy-ptr Returns the whitespace blocks in GETOPTR ioctl
2137 instead of filled blocks
2139 Example: echo "x11amp 128 16384" > /proc/asound/card0/pcm0p/oss
2140 echo "squake 0 0 disable" > /proc/asound/card0/pcm0c/oss
2141 echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
2144 Early Buffer Allocation
2145 =======================
2147 Some drivers (e.g. hdsp) require the large contiguous buffers, and
2148 sometimes it's too late to find such spaces when the driver module is
2149 actually loaded due to memory fragmentation. You can pre-allocate the
2150 PCM buffers by loading snd-page-alloc module and write commands to its
2151 proc file in prior, for example, in the early boot stage like
2152 /etc/init.d/*.local scripts.
2154 Reading the proc file /proc/drivers/snd-page-alloc shows the current
2155 usage of page allocation. In writing, you can send the following
2156 commands to the snd-page-alloc driver:
2158 - add VENDOR DEVICE MASK SIZE BUFFERS
2160 VENDOR and DEVICE are PCI vendor and device IDs. They take
2161 integer numbers (0x prefix is needed for the hex).
2162 MASK is the PCI DMA mask. Pass 0 if not restricted.
2163 SIZE is the size of each buffer to allocate. You can pass
2164 k and m suffix for KB and MB. The max number is 16MB.
2165 BUFFERS is the number of buffers to allocate. It must be greater
2166 than 0. The max number is 4.
2170 This will erase the all pre-allocated buffers which are not in
2177 ALSA project homepage
2178 http://www.alsa-project.org
2181 http://bugzilla.kernel.org/
2184 mailto:alsa-devel@alsa-project.org
2187 http://www.alsa-project.org/alsa-info.sh