broadcom: Move the Broadcom drivers

[pandora-kernel.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c877f41..2f9f208 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -997,38 +997,6 @@ config APRICOT
          To compile this driver as a module, choose M here. The module
          will be called apricot.
 
-config B44
-       tristate "Broadcom 440x/47xx ethernet support"
-       depends on SSB_POSSIBLE && HAS_DMA
-       select SSB
-       select MII
-       help
-         If you have a network (Ethernet) controller of this type, say Y
-         or M and read the Ethernet-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here. The module
-         will be called b44.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B44_PCI_AUTOSELECT
-       bool
-       depends on B44 && SSB_PCIHOST_POSSIBLE
-       select SSB_PCIHOST
-       default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B44_PCICORE_AUTOSELECT
-       bool
-       depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
-       select SSB_DRIVER_PCICORE
-       default y
-
-config B44_PCI
-       bool
-       depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
-       default y
-
 config FORCEDETH
        tristate "nForce Ethernet support"
        depends on NET_PCI && PCI
@@ -1465,15 +1433,6 @@ config XILINX_EMACLITE
        help
          This driver supports the 10/100 Ethernet Lite from Xilinx.
 
-config BCM63XX_ENET
-       tristate "Broadcom 63xx internal mac support"
-       depends on BCM63XX
-       select MII
-       select PHYLIB
-       help
-         This driver supports the ethernet MACs in the Broadcom 63xx
-         MIPS chipset family (BCM63XX).
-
 config FTMAC100
        tristate "Faraday FTMAC100 10/100 Ethernet support"
        depends on ARM
@@ -1683,19 +1642,6 @@ config R8169
          To compile this driver as a module, choose M here: the module
          will be called r8169.  This is recommended.
 
-config SB1250_MAC
-       tristate "SB1250 Gigabit Ethernet support"
-       depends on SIBYTE_SB1xxx_SOC
-       select PHYLIB
-       ---help---
-         This driver supports Gigabit Ethernet interfaces based on the
-         Broadcom SiByte family of System-On-a-Chip parts.  They include
-         the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
-         and BCM1480 chips.
-
-         To compile this driver as a module, choose M here: the module
-         will be called sb1250-mac.
-
 config SIS190
        tristate "SiS190/SiS191 gigabit ethernet support"
        depends on PCI
@@ -1789,39 +1735,6 @@ config VIA_VELOCITY
          To compile this driver as a module, choose M here. The module
          will be called via-velocity.
 
-config TIGON3
-       tristate "Broadcom Tigon3 support"
-       depends on PCI
-       select PHYLIB
-       help
-         This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
-
-         To compile this driver as a module, choose M here: the module
-         will be called tg3.  This is recommended.
-
-config BNX2
-       tristate "Broadcom NetXtremeII support"
-       depends on PCI
-       select CRC32
-       select FW_LOADER
-       help
-         This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
-
-         To compile this driver as a module, choose M here: the module
-         will be called bnx2.  This is recommended.
-
-config CNIC
-       tristate "Broadcom CNIC support"
-       depends on PCI
-       select BNX2
-       select UIO
-       help
-         This driver supports offload features of Broadcom NetXtremeII
-         gigabit Ethernet cards.
-
-         To compile this driver as a module, choose M here: the module
-         will be called cnic.  This is recommended.
-
 config SPIDER_NET
        tristate "Spider Gigabit Ethernet driver"
        depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
@@ -2327,18 +2240,6 @@ config TEHUTI
        help
          Tehuti Networks 10G Ethernet NIC
 
-config BNX2X
-       tristate "Broadcom NetXtremeII 10Gb support"
-       depends on PCI
-       select FW_LOADER
-       select ZLIB_INFLATE
-       select LIBCRC32C
-       select MDIO
-       help
-         This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
-         To compile this driver as a module, choose M here: the module
-         will be called bnx2x.  This is recommended.
-
 config QLCNIC
        tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
        depends on PCI