M: Gary Zambrano <zambrano@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/b44.*
+F: drivers/net/ethernet/broadcom/b44.*
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/bnx2.*
-F: drivers/net/bnx2_*
+F: drivers/net/ethernet/broadcom/bnx2.*
+F: drivers/net/ethernet/broadcom/bnx2_*
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
M: Eilon Greenstein <eilong@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/bnx2x/
+F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Matt Carlson <mcarlson@broadcom.com>
M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org
S: Supported
-F: drivers/net/tg3.*
+F: drivers/net/ethernet/broadcom/tg3.*
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
M: Brett Rudley <brudley@broadcom.com>
To compile this driver as a module, choose M here. The module
will be called apricot.
-config B44
- tristate "Broadcom 440x/47xx ethernet support"
- depends on SSB_POSSIBLE && HAS_DMA
- select SSB
- select MII
- help
- If you have a network (Ethernet) controller of this type, say Y
- or M and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called b44.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B44_PCI_AUTOSELECT
- bool
- depends on B44 && SSB_PCIHOST_POSSIBLE
- select SSB_PCIHOST
- default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B44_PCICORE_AUTOSELECT
- bool
- depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
- select SSB_DRIVER_PCICORE
- default y
-
-config B44_PCI
- bool
- depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- default y
-
config FORCEDETH
tristate "nForce Ethernet support"
depends on NET_PCI && PCI
help
This driver supports the 10/100 Ethernet Lite from Xilinx.
-config BCM63XX_ENET
- tristate "Broadcom 63xx internal mac support"
- depends on BCM63XX
- select MII
- select PHYLIB
- help
- This driver supports the ethernet MACs in the Broadcom 63xx
- MIPS chipset family (BCM63XX).
-
config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
-config SB1250_MAC
- tristate "SB1250 Gigabit Ethernet support"
- depends on SIBYTE_SB1xxx_SOC
- select PHYLIB
- ---help---
- This driver supports Gigabit Ethernet interfaces based on the
- Broadcom SiByte family of System-On-a-Chip parts. They include
- the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
- and BCM1480 chips.
-
- To compile this driver as a module, choose M here: the module
- will be called sb1250-mac.
-
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
To compile this driver as a module, choose M here. The module
will be called via-velocity.
-config TIGON3
- tristate "Broadcom Tigon3 support"
- depends on PCI
- select PHYLIB
- help
- This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called tg3. This is recommended.
-
-config BNX2
- tristate "Broadcom NetXtremeII support"
- depends on PCI
- select CRC32
- select FW_LOADER
- help
- This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called bnx2. This is recommended.
-
-config CNIC
- tristate "Broadcom CNIC support"
- depends on PCI
- select BNX2
- select UIO
- help
- This driver supports offload features of Broadcom NetXtremeII
- gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called cnic. This is recommended.
-
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
help
Tehuti Networks 10G Ethernet NIC
-config BNX2X
- tristate "Broadcom NetXtremeII 10Gb support"
- depends on PCI
- select FW_LOADER
- select ZLIB_INFLATE
- select LIBCRC32C
- select MDIO
- help
- This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
- To compile this driver as a module, choose M here: the module
- will be called bnx2x. This is recommended.
-
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_FEALNX) += fealnx.o
-obj-$(CONFIG_TIGON3) += tg3.o
-obj-$(CONFIG_BNX2) += bnx2.o
-obj-$(CONFIG_CNIC) += cnic.o
-obj-$(CONFIG_BNX2X) += bnx2x/
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
endif
-obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
-obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/broadcom/Kconfig"
endif # ETHERNET
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
+obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
--- /dev/null
+#
+# Broadcom device configuration
+#
+
+config NET_VENDOR_BROADCOM
+ bool "Broadcom devices"
+ depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
+ SIBYTE_SB1xxx_SOC
+ ---help---
+ If you have a network (Ethernet) chipset belonging to this class,
+ say Y.
+
+ Note that the answer to this question does not directly affect
+ the kernel: saying N will just case the configurator to skip all
+ the questions regarding AMD chipsets. If you say Y, you will be asked
+ for your specific chipset/driver in the following questions.
+
+if NET_VENDOR_BROADCOM
+
+config B44
+ tristate "Broadcom 440x/47xx ethernet support"
+ depends on SSB_POSSIBLE && HAS_DMA
+ select SSB
+ select MII
+ ---help---
+ If you have a network (Ethernet) controller of this type, say Y
+ or M and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called b44.
+
+# Auto-select SSB PCI-HOST support, if possible
+config B44_PCI_AUTOSELECT
+ bool
+ depends on B44 && SSB_PCIHOST_POSSIBLE
+ select SSB_PCIHOST
+ default y
+
+# Auto-select SSB PCICORE driver, if possible
+config B44_PCICORE_AUTOSELECT
+ bool
+ depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
+ select SSB_DRIVER_PCICORE
+ default y
+
+config B44_PCI
+ bool
+ depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
+ default y
+
+config BCM63XX_ENET
+ tristate "Broadcom 63xx internal mac support"
+ depends on BCM63XX
+ select MII
+ select PHYLIB
+ help
+ This driver supports the ethernet MACs in the Broadcom 63xx
+ MIPS chipset family (BCM63XX).
+
+config BNX2
+ tristate "Broadcom NetXtremeII support"
+ depends on PCI
+ select CRC32
+ select FW_LOADER
+ ---help---
+ This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bnx2. This is recommended.
+
+config CNIC
+ tristate "Broadcom CNIC support"
+ depends on PCI
+ select BNX2
+ select UIO
+ ---help---
+ This driver supports offload features of Broadcom NetXtremeII
+ gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cnic. This is recommended.
+
+config SB1250_MAC
+ tristate "SB1250 Gigabit Ethernet support"
+ depends on SIBYTE_SB1xxx_SOC
+ select PHYLIB
+ ---help---
+ This driver supports Gigabit Ethernet interfaces based on the
+ Broadcom SiByte family of System-On-a-Chip parts. They include
+ the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
+ and BCM1480 chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sb1250-mac.
+
+config TIGON3
+ tristate "Broadcom Tigon3 support"
+ depends on PCI
+ select PHYLIB
+ ---help---
+ This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called tg3. This is recommended.
+
+config BNX2X
+ tristate "Broadcom NetXtremeII 10Gb support"
+ depends on PCI
+ select FW_LOADER
+ select ZLIB_INFLATE
+ select LIBCRC32C
+ select MDIO
+ ---help---
+ This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
+ To compile this driver as a module, choose M here: the module
+ will be called bnx2x. This is recommended.
+
+endif # NET_VENDOR_BROADCOM
--- /dev/null
+#
+# Makefile for the Broadcom network device drivers.
+#
+
+obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
+obj-$(CONFIG_BNX2X) += bnx2x/
+obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+obj-$(CONFIG_TIGON3) += tg3.o
#include "bnx2x/bnx2x_reg.h"
#include "bnx2x/bnx2x_fw_defs.h"
#include "bnx2x/bnx2x_hsi.h"
-#include "../scsi/bnx2i/57xx_iscsi_constants.h"
-#include "../scsi/bnx2i/57xx_iscsi_hsi.h"
+#include "../../../scsi/bnx2i/57xx_iscsi_constants.h"
+#include "../../../scsi/bnx2i/57xx_iscsi_hsi.h"
#include "cnic.h"
#include "cnic_defs.h"
#include "57xx_hsi_bnx2fc.h"
#include "bnx2fc_debug.h"
-#include "../../net/cnic_if.h"
+#include "../../net/ethernet/broadcom/cnic_if.h"
#include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc"
#include <scsi/libiscsi.h>
#include <scsi/scsi_transport_iscsi.h>
-#include "../../net/cnic_if.h"
+#include "../../net/ethernet/broadcom/cnic_if.h"
#include "57xx_iscsi_hsi.h"
#include "57xx_iscsi_constants.h"
git.openpandora.org / pandora-kernel.git / commitdiff