# Ethernet
#
+source "drivers/net/ethernet/Kconfig"
+
menuconfig NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
depends on !UML
source "drivers/net/arm/Kconfig"
-config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS || SUPERH
- select PHYLIB
- select MDIO_BITBANG
- help
- AX88796 driver, using platform bus to provide
- chip detection and resources
-
-config AX88796_93CX6
- bool "ASIX AX88796 external 93CX6 eeprom support"
- depends on AX88796
- select EEPROM_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
config MACE
tristate "MACE (Power Mac ethernet) support"
depends on PPC_PMAC && PPC32
To compile this driver as a module, choose M here: the module
will be called bmac.
-config ARIADNE
- tristate "Ariadne support"
- depends on ZORRO
- help
- If you have a Village Tronic Ariadne Ethernet adapter, say Y.
- Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called ariadne.
-
-config A2065
- tristate "A2065 support"
- depends on ZORRO
- select CRC32
- help
- If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the module
- will be called a2065.
-
-config HYDRA
- tristate "Hydra support"
- depends on ZORRO
- select CRC32
- help
- If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called hydra.
-
-config ZORRO8390
- tristate "Zorro NS8390-based Ethernet support"
- depends on ZORRO
- select CRC32
- help
- This driver is for Zorro Ethernet cards using an NS8390-compatible
- chipset, like the Village Tronic Ariadne II and the Individual
- Computers X-Surf Ethernet cards. If you have such a card, say Y.
- Otherwise, say N.
-
- To compile this driver as a module, choose M here: the module
- will be called zorro8390.
-
-config APNE
- tristate "PCMCIA NE2000 support"
- depends on AMIGA_PCMCIA
- select CRC32
- help
- If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
- say N.
-
- To compile this driver as a module, choose M here: the module
- will be called apne.
-
-config MAC8390
- bool "Macintosh NS 8390 based ethernet cards"
- depends on MAC
- select CRC32
- help
- If you want to include a driver to support Nubus or LC-PDS
- Ethernet cards using an NS8390 chipset or its equivalent, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on MAC
say Y and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
-config MVME147_NET
- tristate "MVME147 (Lance) Ethernet support"
- depends on MVME147
- select CRC32
- help
- Support for the on-board Ethernet interface on the Motorola MVME147
- single-board computer. Say Y here to include the
- driver for this chip in your kernel.
- To compile this driver as a module, choose M here.
-
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on MVME16x
in your kernel.
To compile this driver as a module, choose M here.
-config ATARILANCE
- tristate "Atari Lance support"
- depends on ATARI
- help
- Say Y to include support for several Atari Ethernet adapters based
- on the AMD Lance chipset: RieblCard (with or without battery), or
- PAMCard VME (also the version by Rhotron, with different addresses).
-
-config SUN3LANCE
- tristate "Sun3/Sun3x on-board LANCE support"
- depends on SUN3 || SUN3X
- help
- Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
- featured an AMD Lance 10Mbit Ethernet controller on board; say Y
- here to compile in the Linux driver for this and enable Ethernet.
- General Linux information on the Sun 3 and 3x series (now
- discontinued) is at
- <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
- If you're not building a kernel for a Sun 3, say N.
-
config SUN3_82586
bool "Sun3 on-board Intel 82586 support"
depends on SUN3
that this driver does not support 82586-based adapters on additional
VME boards.
-config HPLANCE
- bool "HP on-board LANCE support"
- depends on DIO
- select CRC32
- help
- If you want to use the builtin "LANCE" Ethernet controller on an
- HP300 machine, say Y here.
-
config LASI_82596
tristate "Lasi ethernet"
depends on GSC
help
This is the driver for the onboard card of the Xtensa XT2000 board.
-config MIPS_AU1X00_ENET
- tristate "MIPS AU1000 Ethernet support"
- depends on MIPS_ALCHEMY
- select PHYLIB
- select CRC32
- help
- If you have an Alchemy Semi AU1X00 based system
- say Y. Otherwise, say N.
-
config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27
tristate "SGI O2 MACE Fast Ethernet support"
depends on SGI_IP32=y
-config STNIC
- tristate "National DP83902AV support"
- depends on SUPERH
- select CRC32
- help
- Support for cards based on the National Semiconductor DP83902AV
- ST-NIC Serial Network Interface Controller for Twisted Pair. This
- is a 10Mbit/sec Ethernet controller. Product overview and specs at
- <http://www.national.com/pf/DP/DP83902A.html>.
-
- If unsure, say N.
-
config SH_ETH
tristate "Renesas SuperH Ethernet support"
depends on SUPERH && \
This driver supporting CPUs are:
- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
-config SUNLANCE
- tristate "Sun LANCE support"
- depends on SBUS
- select CRC32
- help
- This driver supports the "le" interface present on all 32-bit Sparc
- systems, on some older Ultra systems and as an Sbus option. These
- cards are based on the AMD Lance chipset, which is better known
- via the NE2100 cards.
-
- To compile this driver as a module, choose M here: the module
- will be called sunlance.
-
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on SBUS || PCI
help
Support for virtual network devices under Sun Logical Domains.
-config NET_VENDOR_3COM
- bool "3COM cards"
- depends on ISA || EISA || MCA || PCI
- help
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about 3COM cards. If you say Y, you will be asked for
- your specific card in the following questions.
-
-config EL1
- tristate "3c501 \"EtherLink\" support"
- depends on NET_VENDOR_3COM && ISA
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Also, consider buying a
- new card, since the 3c501 is slow, broken, and obsolete: you will
- have problems. Some people suggest to ping ("man ping") a nearby
- machine every minute ("man cron") when using this card.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c501.
-
config EL2
tristate "3c503 \"EtherLink II\" support"
- depends on NET_VENDOR_3COM && ISA
+ depends on ISA
select CRC32
- help
+ ---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config ELPLUS
tristate "3c505 \"EtherLink Plus\" support"
- depends on NET_VENDOR_3COM && ISA && ISA_DMA_API
+ depends on ISA && ISA_DMA_API
---help---
Information about this network (Ethernet) card can be found in
<file:Documentation/networking/3c505.txt>. If you have a card of
config EL16
tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL
- help
+ depends on ISA && EXPERIMENTAL
+ ---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called 3c507.
-config EL3
- tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
- depends on NET_VENDOR_3COM && (ISA || EISA || MCA)
- ---help---
- If you have a network (Ethernet) card belonging to the 3Com
- EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
- from <http://www.tldp.org/docs.html#howto>.
-
- If your card is not working you may need to use the DOS
- setup disk to disable Plug & Play mode, and to select the default
- media type.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c509.
-
-config 3C515
- tristate "3c515 ISA \"Fast EtherLink\""
- depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API
- help
- If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
- network card, say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c515.
-
config ELMC
tristate "3c523 \"EtherLink/MC\" support"
- depends on NET_VENDOR_3COM && MCA_LEGACY
- help
+ depends on MCA_LEGACY
+ ---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config ELMC_II
tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
- depends on NET_VENDOR_3COM && MCA && MCA_LEGACY
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c527.
-
-config VORTEX
- tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
- depends on NET_VENDOR_3COM && (PCI || EISA)
- select MII
+ depends on MCA && MCA_LEGACY
---help---
- This option enables driver support for a large number of 10Mbps and
- 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
-
- "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
- "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
- "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
- "Tornado" (3c905) PCI
- "Hurricane" (3c555/3cSOHO) PCI
-
- If you have such a card, say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>. More
- specific information is in
- <file:Documentation/networking/vortex.txt> and in the comments at
- the beginning of <file:drivers/net/3c59x.c>.
-
- To compile this support as a module, choose M here.
-
-config TYPHOON
- tristate "3cr990 series \"Typhoon\" support"
- depends on NET_VENDOR_3COM && PCI
- select CRC32
- ---help---
- This option enables driver support for the 3cr990 series of cards:
-
- 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
- 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
- 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
-
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
- will be called typhoon.
-
-config LANCE
- tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
- depends on ISA && ISA_DMA_API
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
- of this type.
-
- To compile this driver as a module, choose M here: the module
- will be called lance. This is recommended.
-
-config NET_VENDOR_SMC
- bool "Western Digital/SMC cards"
- depends on ISA || MCA || EISA || MAC
- help
- If you have a network (Ethernet) card belonging to this class, say Y
- and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that the answer to this question doesn't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about Western Digital cards. If you say Y, you will be
- asked for your specific card in the following questions.
-
-config WD80x3
- tristate "WD80*3 support"
- depends on NET_VENDOR_SMC && ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called wd.
-
-config ULTRAMCA
- tristate "SMC Ultra MCA support"
- depends on NET_VENDOR_SMC && MCA
- select CRC32
- help
- If you have a network (Ethernet) card of this type and are running
- an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-mca.
-
-config ULTRA
- tristate "SMC Ultra support"
- depends on NET_VENDOR_SMC && ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Important: There have been many reports that, with some motherboards
- mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
- such as some BusLogic models) causes corruption problems with many
- operating systems. The Linux smc-ultra driver has a work-around for
- this but keep it in mind if you have such a SCSI card and have
- problems.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-ultra.
-
-config ULTRA32
- tristate "SMC Ultra32 EISA support"
- depends on NET_VENDOR_SMC && EISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called smc-ultra32.
+ will be called 3c527.
config BFIN_MAC
tristate "Blackfin on-chip MAC support"
To compile this driver as a module, choose M here. The module
will be called ni52.
-config NI65
- tristate "NI6510 support"
- depends on NET_VENDOR_RACAL && ISA && ISA_DMA_API
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ni65.
-
config DNET
tristate "Dave ethernet support (DNET)"
depends on NET_ETHERNET && HAS_IOMEM
To compile this driver as a module, choose M here. The module
will be called at1700.
-config DEPCA
- tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
- depends on ISA || EISA || MCA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto> as well as
- <file:drivers/net/depca.c>.
-
- To compile this driver as a module, choose M here. The module
- will be called depca.
-
config HP100
tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
depends on ISA || EISA || PCI
the remaining ISA network card questions. If you say Y, you will be
asked for your specific card in the following questions.
-config E2100
- tristate "Cabletron E21xx support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called e2100.
-
config EWRK3
tristate "EtherWORKS 3 (DE203, DE204, DE205) support"
depends on NET_ISA
To compile this driver as a module, choose M here. The module
will be called eepro.
-config HPLAN_PLUS
- tristate "HP PCLAN+ (27247B and 27252A) support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp-plus.
-
-config HPLAN
- tristate "HP PCLAN (27245 and other 27xxx series) support"
- depends on NET_ISA
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp.
-
config LP486E
tristate "LP486E on board Ethernet"
depends on NET_ISA
To compile this driver as a module, choose M here. The module
will be called eth16i.
-config NE2000
- tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Many Ethernet cards
- without a specific driver are compatible with NE2000.
-
- If you have a PCI NE2000 card however, say N here and Y to "PCI
- NE2000 and clone support" under "EISA, VLB, PCI and on board
- controllers" below. If you have a NE2000 card and are running on
- an MCA system (a bus system used on some IBM PS/2 computers and
- laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
- below.
-
- To compile this driver as a module, choose M here. The module
- will be called ne.
-
config ZNET
tristate "Zenith Z-Note support (EXPERIMENTAL)"
depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
To compile this driver as a module, choose M here. The module
will be called seeq8005.
-config NE2_MCA
- tristate "NE/2 (ne2000 MCA version) support"
- depends on MCA_LEGACY
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ne2.
-
config IBMLANA
tristate "IBM LAN Adapter/A support"
depends on MCA
will be asked for your specific card in the following questions. If
you are unsure, say Y.
-config PCNET32
- tristate "AMD PCnet32 PCI support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
- answer Y here and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called pcnet32.
-
-config AMD8111_ETH
- tristate "AMD 8111 (new PCI lance) support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- help
- If you have an AMD 8111-based PCI lance ethernet card,
- answer Y here and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called amd8111e.
-
config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support"
depends on NET_PCI && PCI
To compile this driver as a module, choose M here: the module
will be called starfire. This is recommended.
-config AC3200
- tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
- depends on NET_PCI && (ISA || EISA) && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called ac3200.
-
config KSZ884X_PCI
tristate "Micrel KSZ8841/2 PCI"
depends on NET_PCI && PCI
To compile this driver as a module, choose M here. The module
will be called apricot.
-config B44
- tristate "Broadcom 440x/47xx ethernet support"
- depends on SSB_POSSIBLE && HAS_DMA
- select SSB
- select MII
- help
- If you have a network (Ethernet) controller of this type, say Y
- or M and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called b44.
-
-# Auto-select SSB PCI-HOST support, if possible
-config B44_PCI_AUTOSELECT
- bool
- depends on B44 && SSB_PCIHOST_POSSIBLE
- select SSB_PCIHOST
- default y
-
-# Auto-select SSB PCICORE driver, if possible
-config B44_PCICORE_AUTOSELECT
- bool
- depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
- select SSB_DRIVER_PCICORE
- default y
-
-config B44_PCI
- bool
- depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
- default y
-
config FORCEDETH
tristate "nForce Ethernet support"
depends on NET_PCI && PCI
To compile this driver as a module, choose M here. The module
will be called e100.
-config LNE390
- tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called lne390.
-
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
More specific information and updates are available from
<http://www.scyld.com/network/natsemi.html>.
-config NE2K_PCI
- tristate "PCI NE2000 and clones support (see help)"
- depends on NET_PCI && PCI
- select CRC32
- ---help---
- This driver is for NE2000 compatible PCI cards. It will not work
- with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
- support" below). If you have a PCI NE2000 network (Ethernet) card,
- say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- This driver also works for the following NE2000 clone cards:
- RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
- NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
- Holtek HT80232 Holtek HT80229
-
- To compile this driver as a module, choose M here. The module
- will be called ne2k-pci.
-
-config NE3210
- tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>. Note that this driver
- will NOT WORK for NE3200 cards as they are completely different.
-
- To compile this driver as a module, choose M here. The module
- will be called ne3210.
-
-config ES3210
- tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
- depends on NET_PCI && EISA && EXPERIMENTAL
- select CRC32
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called es3210.
-
config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
depends on NET_PCI && PCI && EXPERIMENTAL
Say Y here if you have an Seeq based Ethernet network card. This is
used in many Silicon Graphics machines.
-config DECLANCE
- tristate "DEC LANCE ethernet controller support"
- depends on MACH_DECSTATION
- select CRC32
- help
- This driver is for the series of Ethernet controllers produced by
- DEC (now Compaq) based on the AMD Lance chipset, including the
- DEPCA series. (This chipset is better known via the NE2100 cards.)
-
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
If not sure, enable.
If compiled as module, it will be called fec_mpc52xx_phy.
-config NE_H8300
- tristate "NE2000 compatible support for H8/300"
- depends on H8300
- help
- Say Y here if you want to use the NE2000 compatible
- controller on the Renesas H8/300 processor.
-
config ATL2
tristate "Atheros L2 Fast Ethernet support"
depends on PCI
help
This driver supports the 10/100 Ethernet Lite from Xilinx.
-config BCM63XX_ENET
- tristate "Broadcom 63xx internal mac support"
- depends on BCM63XX
- select MII
- select PHYLIB
- help
- This driver supports the ethernet MACs in the Broadcom 63xx
- MIPS chipset family (BCM63XX).
-
config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM
if NETDEV_1000
-config ACENIC
- tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
- depends on PCI
- ---help---
- Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear
- GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet
- adapter. The driver allows for using the Jumbo Frame option (9000
- bytes/frame) however it requires that your switches can handle this
- as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig
- line.
-
- To compile this driver as a module, choose M here: the
- module will be called acenic.
-
-config ACENIC_OMIT_TIGON_I
- bool "Omit support for old Tigon I based AceNICs"
- depends on ACENIC
- help
- Say Y here if you only have Tigon II based AceNICs and want to leave
- out support for the older Tigon I based cards which are no longer
- being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B
- version)). This will reduce the size of the driver object by
- app. 100KB. If you are not sure whether your card is a Tigon I or a
- Tigon II, say N here.
-
- The safe and default value for this is N.
-
config DL2K
tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
-config SB1250_MAC
- tristate "SB1250 Gigabit Ethernet support"
- depends on SIBYTE_SB1xxx_SOC
- select PHYLIB
- ---help---
- This driver supports Gigabit Ethernet interfaces based on the
- Broadcom SiByte family of System-On-a-Chip parts. They include
- the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
- and BCM1480 chips.
-
- To compile this driver as a module, choose M here: the module
- will be called sb1250-mac.
-
config SIS190
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
To compile this driver as a module, choose M here. The module
will be called via-velocity.
-config TIGON3
- tristate "Broadcom Tigon3 support"
- depends on PCI
- select PHYLIB
- help
- This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called tg3. This is recommended.
-
-config BNX2
- tristate "Broadcom NetXtremeII support"
- depends on PCI
- select CRC32
- select FW_LOADER
- help
- This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called bnx2. This is recommended.
-
-config CNIC
- tristate "Broadcom CNIC support"
- depends on PCI
- select BNX2
- select UIO
- help
- This driver supports offload features of Broadcom NetXtremeII
- gigabit Ethernet cards.
-
- To compile this driver as a module, choose M here: the module
- will be called cnic. This is recommended.
-
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
help
Tehuti Networks 10G Ethernet NIC
-config BNX2X
- tristate "Broadcom NetXtremeII 10Gb support"
- depends on PCI
- select FW_LOADER
- select ZLIB_INFLATE
- select LIBCRC32C
- select MDIO
- help
- This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
- To compile this driver as a module, choose M here: the module
- will be called bnx2x. This is recommended.
-
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
git.openpandora.org / pandora-kernel.git / blobdiff