2 * linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
4 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
11 * Thanks to the following companies for their support:
13 * - JMicron (hardware and technical support)
16 #include <linux/delay.h>
17 #include <linux/highmem.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/slab.h>
21 #include <linux/scatterlist.h>
23 #include <linux/leds.h>
25 #include <linux/mmc/host.h>
29 #define DRIVER_NAME "sdhci"
31 #define DBG(f, x...) \
32 pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
34 #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
35 defined(CONFIG_MMC_SDHCI_MODULE))
36 #define SDHCI_USE_LEDS_CLASS
39 static unsigned int debug_quirks = 0;
41 static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
42 static void sdhci_finish_data(struct sdhci_host *);
44 static void sdhci_send_command(struct sdhci_host *, struct mmc_command *);
45 static void sdhci_finish_command(struct sdhci_host *);
47 static void sdhci_dumpregs(struct sdhci_host *host)
49 printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
51 printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
52 sdhci_readl(host, SDHCI_DMA_ADDRESS),
53 sdhci_readw(host, SDHCI_HOST_VERSION));
54 printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
55 sdhci_readw(host, SDHCI_BLOCK_SIZE),
56 sdhci_readw(host, SDHCI_BLOCK_COUNT));
57 printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
58 sdhci_readl(host, SDHCI_ARGUMENT),
59 sdhci_readw(host, SDHCI_TRANSFER_MODE));
60 printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
61 sdhci_readl(host, SDHCI_PRESENT_STATE),
62 sdhci_readb(host, SDHCI_HOST_CONTROL));
63 printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
64 sdhci_readb(host, SDHCI_POWER_CONTROL),
65 sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
66 printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
67 sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
68 sdhci_readw(host, SDHCI_CLOCK_CONTROL));
69 printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
70 sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
71 sdhci_readl(host, SDHCI_INT_STATUS));
72 printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
73 sdhci_readl(host, SDHCI_INT_ENABLE),
74 sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
75 printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
76 sdhci_readw(host, SDHCI_ACMD12_ERR),
77 sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
78 printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n",
79 sdhci_readl(host, SDHCI_CAPABILITIES),
80 sdhci_readl(host, SDHCI_MAX_CURRENT));
82 if (host->flags & SDHCI_USE_ADMA)
83 printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
84 readl(host->ioaddr + SDHCI_ADMA_ERROR),
85 readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
87 printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
90 /*****************************************************************************\
92 * Low level functions *
94 \*****************************************************************************/
96 static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
100 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
103 sdhci_writel(host, ier, SDHCI_INT_ENABLE);
104 sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
107 static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs)
109 sdhci_clear_set_irqs(host, 0, irqs);
112 static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
114 sdhci_clear_set_irqs(host, irqs, 0);
117 static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
119 u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
121 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
125 sdhci_unmask_irqs(host, irqs);
127 sdhci_mask_irqs(host, irqs);
130 static void sdhci_enable_card_detection(struct sdhci_host *host)
132 sdhci_set_card_detection(host, true);
135 static void sdhci_disable_card_detection(struct sdhci_host *host)
137 sdhci_set_card_detection(host, false);
140 static void sdhci_reset(struct sdhci_host *host, u8 mask)
142 unsigned long timeout;
143 u32 uninitialized_var(ier);
145 if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
146 if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
151 if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
152 ier = sdhci_readl(host, SDHCI_INT_ENABLE);
154 sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
156 if (mask & SDHCI_RESET_ALL)
159 /* Wait max 100 ms */
162 /* hw clears the bit when it's done */
163 while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
165 printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
166 mmc_hostname(host->mmc), (int)mask);
167 sdhci_dumpregs(host);
174 if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
175 sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
178 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
180 static void sdhci_init(struct sdhci_host *host, int soft)
183 sdhci_reset(host, SDHCI_RESET_CMD|SDHCI_RESET_DATA);
185 sdhci_reset(host, SDHCI_RESET_ALL);
187 sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
188 SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
189 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
190 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
191 SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE);
194 /* force clock reconfiguration */
196 sdhci_set_ios(host->mmc, &host->mmc->ios);
200 static void sdhci_reinit(struct sdhci_host *host)
203 sdhci_enable_card_detection(host);
206 static void sdhci_activate_led(struct sdhci_host *host)
210 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
211 ctrl |= SDHCI_CTRL_LED;
212 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
215 static void sdhci_deactivate_led(struct sdhci_host *host)
219 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
220 ctrl &= ~SDHCI_CTRL_LED;
221 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
224 #ifdef SDHCI_USE_LEDS_CLASS
225 static void sdhci_led_control(struct led_classdev *led,
226 enum led_brightness brightness)
228 struct sdhci_host *host = container_of(led, struct sdhci_host, led);
231 spin_lock_irqsave(&host->lock, flags);
233 if (brightness == LED_OFF)
234 sdhci_deactivate_led(host);
236 sdhci_activate_led(host);
238 spin_unlock_irqrestore(&host->lock, flags);
242 /*****************************************************************************\
246 \*****************************************************************************/
248 static void sdhci_read_block_pio(struct sdhci_host *host)
251 size_t blksize, len, chunk;
252 u32 uninitialized_var(scratch);
255 DBG("PIO reading\n");
257 blksize = host->data->blksz;
260 local_irq_save(flags);
263 if (!sg_miter_next(&host->sg_miter))
266 len = min(host->sg_miter.length, blksize);
269 host->sg_miter.consumed = len;
271 buf = host->sg_miter.addr;
275 scratch = sdhci_readl(host, SDHCI_BUFFER);
279 *buf = scratch & 0xFF;
288 sg_miter_stop(&host->sg_miter);
290 local_irq_restore(flags);
293 static void sdhci_write_block_pio(struct sdhci_host *host)
296 size_t blksize, len, chunk;
300 DBG("PIO writing\n");
302 blksize = host->data->blksz;
306 local_irq_save(flags);
309 if (!sg_miter_next(&host->sg_miter))
312 len = min(host->sg_miter.length, blksize);
315 host->sg_miter.consumed = len;
317 buf = host->sg_miter.addr;
320 scratch |= (u32)*buf << (chunk * 8);
326 if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
327 sdhci_writel(host, scratch, SDHCI_BUFFER);
334 sg_miter_stop(&host->sg_miter);
336 local_irq_restore(flags);
339 static void sdhci_transfer_pio(struct sdhci_host *host)
345 if (host->blocks == 0)
348 if (host->data->flags & MMC_DATA_READ)
349 mask = SDHCI_DATA_AVAILABLE;
351 mask = SDHCI_SPACE_AVAILABLE;
354 * Some controllers (JMicron JMB38x) mess up the buffer bits
355 * for transfers < 4 bytes. As long as it is just one block,
356 * we can ignore the bits.
358 if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
359 (host->data->blocks == 1))
362 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
363 if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
366 if (host->data->flags & MMC_DATA_READ)
367 sdhci_read_block_pio(host);
369 sdhci_write_block_pio(host);
372 if (host->blocks == 0)
376 DBG("PIO transfer complete.\n");
379 static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
381 local_irq_save(*flags);
382 return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
385 static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
387 kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
388 local_irq_restore(*flags);
391 static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
393 __le32 *dataddr = (__le32 __force *)(desc + 4);
394 __le16 *cmdlen = (__le16 __force *)desc;
396 /* SDHCI specification says ADMA descriptors should be 4 byte
397 * aligned, so using 16 or 32bit operations should be safe. */
399 cmdlen[0] = cpu_to_le16(cmd);
400 cmdlen[1] = cpu_to_le16(len);
402 dataddr[0] = cpu_to_le32(addr);
405 static int sdhci_adma_table_pre(struct sdhci_host *host,
406 struct mmc_data *data)
413 dma_addr_t align_addr;
416 struct scatterlist *sg;
422 * The spec does not specify endianness of descriptor table.
423 * We currently guess that it is LE.
426 if (data->flags & MMC_DATA_READ)
427 direction = DMA_FROM_DEVICE;
429 direction = DMA_TO_DEVICE;
432 * The ADMA descriptor table is mapped further down as we
433 * need to fill it with data first.
436 host->align_addr = dma_map_single(mmc_dev(host->mmc),
437 host->align_buffer, 128 * 4, direction);
438 if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
440 BUG_ON(host->align_addr & 0x3);
442 host->sg_count = dma_map_sg(mmc_dev(host->mmc),
443 data->sg, data->sg_len, direction);
444 if (host->sg_count == 0)
447 desc = host->adma_desc;
448 align = host->align_buffer;
450 align_addr = host->align_addr;
452 for_each_sg(data->sg, sg, host->sg_count, i) {
453 addr = sg_dma_address(sg);
454 len = sg_dma_len(sg);
457 * The SDHCI specification states that ADMA
458 * addresses must be 32-bit aligned. If they
459 * aren't, then we use a bounce buffer for
460 * the (up to three) bytes that screw up the
463 offset = (4 - (addr & 0x3)) & 0x3;
465 if (data->flags & MMC_DATA_WRITE) {
466 buffer = sdhci_kmap_atomic(sg, &flags);
467 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
468 memcpy(align, buffer, offset);
469 sdhci_kunmap_atomic(buffer, &flags);
473 sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
475 BUG_ON(offset > 65536);
489 sdhci_set_adma_desc(desc, addr, len, 0x21);
493 * If this triggers then we have a calculation bug
496 WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
500 * Add a terminating entry.
503 /* nop, end, valid */
504 sdhci_set_adma_desc(desc, 0, 0, 0x3);
507 * Resync align buffer as we might have changed it.
509 if (data->flags & MMC_DATA_WRITE) {
510 dma_sync_single_for_device(mmc_dev(host->mmc),
511 host->align_addr, 128 * 4, direction);
514 host->adma_addr = dma_map_single(mmc_dev(host->mmc),
515 host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
516 if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
518 BUG_ON(host->adma_addr & 0x3);
523 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
524 data->sg_len, direction);
526 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
532 static void sdhci_adma_table_post(struct sdhci_host *host,
533 struct mmc_data *data)
537 struct scatterlist *sg;
543 if (data->flags & MMC_DATA_READ)
544 direction = DMA_FROM_DEVICE;
546 direction = DMA_TO_DEVICE;
548 dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
549 (128 * 2 + 1) * 4, DMA_TO_DEVICE);
551 dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
554 if (data->flags & MMC_DATA_READ) {
555 dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
556 data->sg_len, direction);
558 align = host->align_buffer;
560 for_each_sg(data->sg, sg, host->sg_count, i) {
561 if (sg_dma_address(sg) & 0x3) {
562 size = 4 - (sg_dma_address(sg) & 0x3);
564 buffer = sdhci_kmap_atomic(sg, &flags);
565 WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
566 memcpy(buffer, align, size);
567 sdhci_kunmap_atomic(buffer, &flags);
574 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
575 data->sg_len, direction);
578 static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
581 unsigned target_timeout, current_timeout;
584 * If the host controller provides us with an incorrect timeout
585 * value, just skip the check and use 0xE. The hardware may take
586 * longer to time out, but that's much better than having a too-short
589 if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
593 target_timeout = data->timeout_ns / 1000 +
594 data->timeout_clks / host->clock;
596 if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
597 host->timeout_clk = host->clock / 1000;
600 * Figure out needed cycles.
601 * We do this in steps in order to fit inside a 32 bit int.
602 * The first step is the minimum timeout, which will have a
603 * minimum resolution of 6 bits:
604 * (1) 2^13*1000 > 2^22,
605 * (2) host->timeout_clk < 2^16
610 current_timeout = (1 << 13) * 1000 / host->timeout_clk;
611 while (current_timeout < target_timeout) {
613 current_timeout <<= 1;
619 printk(KERN_WARNING "%s: Too large timeout requested!\n",
620 mmc_hostname(host->mmc));
627 static void sdhci_set_transfer_irqs(struct sdhci_host *host)
629 u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
630 u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
632 if (host->flags & SDHCI_REQ_USE_DMA)
633 sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
635 sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
638 static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
650 BUG_ON(data->blksz * data->blocks > 524288);
651 BUG_ON(data->blksz > host->mmc->max_blk_size);
652 BUG_ON(data->blocks > 65535);
655 host->data_early = 0;
657 count = sdhci_calc_timeout(host, data);
658 sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
660 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
661 host->flags |= SDHCI_REQ_USE_DMA;
664 * FIXME: This doesn't account for merging when mapping the
667 if (host->flags & SDHCI_REQ_USE_DMA) {
669 struct scatterlist *sg;
672 if (host->flags & SDHCI_USE_ADMA) {
673 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
676 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
680 if (unlikely(broken)) {
681 for_each_sg(data->sg, sg, data->sg_len, i) {
682 if (sg->length & 0x3) {
683 DBG("Reverting to PIO because of "
684 "transfer size (%d)\n",
686 host->flags &= ~SDHCI_REQ_USE_DMA;
694 * The assumption here being that alignment is the same after
695 * translation to device address space.
697 if (host->flags & SDHCI_REQ_USE_DMA) {
699 struct scatterlist *sg;
702 if (host->flags & SDHCI_USE_ADMA) {
704 * As we use 3 byte chunks to work around
705 * alignment problems, we need to check this
708 if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
711 if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
715 if (unlikely(broken)) {
716 for_each_sg(data->sg, sg, data->sg_len, i) {
717 if (sg->offset & 0x3) {
718 DBG("Reverting to PIO because of "
720 host->flags &= ~SDHCI_REQ_USE_DMA;
727 if (host->flags & SDHCI_REQ_USE_DMA) {
728 if (host->flags & SDHCI_USE_ADMA) {
729 ret = sdhci_adma_table_pre(host, data);
732 * This only happens when someone fed
733 * us an invalid request.
736 host->flags &= ~SDHCI_REQ_USE_DMA;
738 sdhci_writel(host, host->adma_addr,
744 sg_cnt = dma_map_sg(mmc_dev(host->mmc),
745 data->sg, data->sg_len,
746 (data->flags & MMC_DATA_READ) ?
751 * This only happens when someone fed
752 * us an invalid request.
755 host->flags &= ~SDHCI_REQ_USE_DMA;
757 WARN_ON(sg_cnt != 1);
758 sdhci_writel(host, sg_dma_address(data->sg),
765 * Always adjust the DMA selection as some controllers
766 * (e.g. JMicron) can't do PIO properly when the selection
769 if (host->version >= SDHCI_SPEC_200) {
770 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
771 ctrl &= ~SDHCI_CTRL_DMA_MASK;
772 if ((host->flags & SDHCI_REQ_USE_DMA) &&
773 (host->flags & SDHCI_USE_ADMA))
774 ctrl |= SDHCI_CTRL_ADMA32;
776 ctrl |= SDHCI_CTRL_SDMA;
777 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
780 if (!(host->flags & SDHCI_REQ_USE_DMA)) {
783 flags = SG_MITER_ATOMIC;
784 if (host->data->flags & MMC_DATA_READ)
785 flags |= SG_MITER_TO_SG;
787 flags |= SG_MITER_FROM_SG;
788 sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
789 host->blocks = data->blocks;
792 sdhci_set_transfer_irqs(host);
794 /* We do not handle DMA boundaries, so set it to max (512 KiB) */
795 sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, data->blksz), SDHCI_BLOCK_SIZE);
796 sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
799 static void sdhci_set_transfer_mode(struct sdhci_host *host,
800 struct mmc_data *data)
807 WARN_ON(!host->data);
809 mode = SDHCI_TRNS_BLK_CNT_EN;
810 if (data->blocks > 1)
811 mode |= SDHCI_TRNS_MULTI;
812 if (data->flags & MMC_DATA_READ)
813 mode |= SDHCI_TRNS_READ;
814 if (host->flags & SDHCI_REQ_USE_DMA)
815 mode |= SDHCI_TRNS_DMA;
817 sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
820 static void sdhci_finish_data(struct sdhci_host *host)
822 struct mmc_data *data;
829 if (host->flags & SDHCI_REQ_USE_DMA) {
830 if (host->flags & SDHCI_USE_ADMA)
831 sdhci_adma_table_post(host, data);
833 dma_unmap_sg(mmc_dev(host->mmc), data->sg,
834 data->sg_len, (data->flags & MMC_DATA_READ) ?
835 DMA_FROM_DEVICE : DMA_TO_DEVICE);
840 * The specification states that the block count register must
841 * be updated, but it does not specify at what point in the
842 * data flow. That makes the register entirely useless to read
843 * back so we have to assume that nothing made it to the card
844 * in the event of an error.
847 data->bytes_xfered = 0;
849 data->bytes_xfered = data->blksz * data->blocks;
853 * The controller needs a reset of internal state machines
854 * upon error conditions.
857 sdhci_reset(host, SDHCI_RESET_CMD);
858 sdhci_reset(host, SDHCI_RESET_DATA);
861 sdhci_send_command(host, data->stop);
863 tasklet_schedule(&host->finish_tasklet);
866 static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
870 unsigned long timeout;
877 mask = SDHCI_CMD_INHIBIT;
878 if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
879 mask |= SDHCI_DATA_INHIBIT;
881 /* We shouldn't wait for data inihibit for stop commands, even
882 though they might use busy signaling */
883 if (host->mrq->data && (cmd == host->mrq->data->stop))
884 mask &= ~SDHCI_DATA_INHIBIT;
886 while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
888 printk(KERN_ERR "%s: Controller never released "
889 "inhibit bit(s).\n", mmc_hostname(host->mmc));
890 sdhci_dumpregs(host);
892 tasklet_schedule(&host->finish_tasklet);
899 mod_timer(&host->timer, jiffies + 10 * HZ);
903 sdhci_prepare_data(host, cmd->data);
905 sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
907 sdhci_set_transfer_mode(host, cmd->data);
909 if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
910 printk(KERN_ERR "%s: Unsupported response type!\n",
911 mmc_hostname(host->mmc));
912 cmd->error = -EINVAL;
913 tasklet_schedule(&host->finish_tasklet);
917 if (!(cmd->flags & MMC_RSP_PRESENT))
918 flags = SDHCI_CMD_RESP_NONE;
919 else if (cmd->flags & MMC_RSP_136)
920 flags = SDHCI_CMD_RESP_LONG;
921 else if (cmd->flags & MMC_RSP_BUSY)
922 flags = SDHCI_CMD_RESP_SHORT_BUSY;
924 flags = SDHCI_CMD_RESP_SHORT;
926 if (cmd->flags & MMC_RSP_CRC)
927 flags |= SDHCI_CMD_CRC;
928 if (cmd->flags & MMC_RSP_OPCODE)
929 flags |= SDHCI_CMD_INDEX;
931 flags |= SDHCI_CMD_DATA;
933 sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
936 static void sdhci_finish_command(struct sdhci_host *host)
940 BUG_ON(host->cmd == NULL);
942 if (host->cmd->flags & MMC_RSP_PRESENT) {
943 if (host->cmd->flags & MMC_RSP_136) {
944 /* CRC is stripped so we need to do some shifting. */
945 for (i = 0;i < 4;i++) {
946 host->cmd->resp[i] = sdhci_readl(host,
947 SDHCI_RESPONSE + (3-i)*4) << 8;
949 host->cmd->resp[i] |=
951 SDHCI_RESPONSE + (3-i)*4-1);
954 host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
958 host->cmd->error = 0;
960 if (host->data && host->data_early)
961 sdhci_finish_data(host);
963 if (!host->cmd->data)
964 tasklet_schedule(&host->finish_tasklet);
969 static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
973 unsigned long timeout;
975 if (clock == host->clock)
978 if (host->ops->set_clock) {
979 host->ops->set_clock(host, clock);
980 if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
984 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
989 for (div = 1;div < 256;div *= 2) {
990 if ((host->max_clk / div) <= clock)
995 clk = div << SDHCI_DIVIDER_SHIFT;
996 clk |= SDHCI_CLOCK_INT_EN;
997 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1001 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
1002 & SDHCI_CLOCK_INT_STABLE)) {
1004 printk(KERN_ERR "%s: Internal clock never "
1005 "stabilised.\n", mmc_hostname(host->mmc));
1006 sdhci_dumpregs(host);
1013 clk |= SDHCI_CLOCK_CARD_EN;
1014 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
1017 host->clock = clock;
1020 static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
1024 if (power == (unsigned short)-1)
1027 switch (1 << power) {
1028 case MMC_VDD_165_195:
1029 pwr = SDHCI_POWER_180;
1033 pwr = SDHCI_POWER_300;
1037 pwr = SDHCI_POWER_330;
1044 if (host->pwr == pwr)
1050 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1055 * Spec says that we should clear the power reg before setting
1056 * a new value. Some controllers don't seem to like this though.
1058 if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
1059 sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
1062 * At least the Marvell CaFe chip gets confused if we set the voltage
1063 * and set turn on power at the same time, so set the voltage first.
1065 if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
1066 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1068 pwr |= SDHCI_POWER_ON;
1070 sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
1073 * Some controllers need an extra 10ms delay of 10ms before they
1074 * can apply clock after applying power
1076 if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
1080 /*****************************************************************************\
1084 \*****************************************************************************/
1086 static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1088 struct sdhci_host *host;
1090 unsigned long flags;
1092 host = mmc_priv(mmc);
1094 spin_lock_irqsave(&host->lock, flags);
1096 WARN_ON(host->mrq != NULL);
1098 #ifndef SDHCI_USE_LEDS_CLASS
1099 sdhci_activate_led(host);
1104 /* If polling, assume that the card is always present. */
1105 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1108 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
1111 if (!present || host->flags & SDHCI_DEVICE_DEAD) {
1112 host->mrq->cmd->error = -ENOMEDIUM;
1113 tasklet_schedule(&host->finish_tasklet);
1115 sdhci_send_command(host, mrq->cmd);
1118 spin_unlock_irqrestore(&host->lock, flags);
1121 static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1123 struct sdhci_host *host;
1124 unsigned long flags;
1127 host = mmc_priv(mmc);
1129 spin_lock_irqsave(&host->lock, flags);
1131 if (host->flags & SDHCI_DEVICE_DEAD)
1135 * Reset the chip on each power off.
1136 * Should clear out any weird states.
1138 if (ios->power_mode == MMC_POWER_OFF) {
1139 sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
1143 sdhci_set_clock(host, ios->clock);
1145 if (ios->power_mode == MMC_POWER_OFF)
1146 sdhci_set_power(host, -1);
1148 sdhci_set_power(host, ios->vdd);
1150 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
1152 if (ios->bus_width == MMC_BUS_WIDTH_4)
1153 ctrl |= SDHCI_CTRL_4BITBUS;
1155 ctrl &= ~SDHCI_CTRL_4BITBUS;
1157 if (ios->timing == MMC_TIMING_SD_HS)
1158 ctrl |= SDHCI_CTRL_HISPD;
1160 ctrl &= ~SDHCI_CTRL_HISPD;
1162 sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
1165 * Some (ENE) controllers go apeshit on some ios operation,
1166 * signalling timeout and CRC errors even on CMD0. Resetting
1167 * it on each ios seems to solve the problem.
1169 if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
1170 sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
1174 spin_unlock_irqrestore(&host->lock, flags);
1177 static int sdhci_get_ro(struct mmc_host *mmc)
1179 struct sdhci_host *host;
1180 unsigned long flags;
1183 host = mmc_priv(mmc);
1185 spin_lock_irqsave(&host->lock, flags);
1187 if (host->flags & SDHCI_DEVICE_DEAD)
1190 present = sdhci_readl(host, SDHCI_PRESENT_STATE);
1192 spin_unlock_irqrestore(&host->lock, flags);
1194 if (host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT)
1195 return !!(present & SDHCI_WRITE_PROTECT);
1196 return !(present & SDHCI_WRITE_PROTECT);
1199 static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1201 struct sdhci_host *host;
1202 unsigned long flags;
1204 host = mmc_priv(mmc);
1206 spin_lock_irqsave(&host->lock, flags);
1208 if (host->flags & SDHCI_DEVICE_DEAD)
1212 sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
1214 sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
1218 spin_unlock_irqrestore(&host->lock, flags);
1221 static const struct mmc_host_ops sdhci_ops = {
1222 .request = sdhci_request,
1223 .set_ios = sdhci_set_ios,
1224 .get_ro = sdhci_get_ro,
1225 .enable_sdio_irq = sdhci_enable_sdio_irq,
1228 /*****************************************************************************\
1232 \*****************************************************************************/
1234 static void sdhci_tasklet_card(unsigned long param)
1236 struct sdhci_host *host;
1237 unsigned long flags;
1239 host = (struct sdhci_host*)param;
1241 spin_lock_irqsave(&host->lock, flags);
1243 if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
1245 printk(KERN_ERR "%s: Card removed during transfer!\n",
1246 mmc_hostname(host->mmc));
1247 printk(KERN_ERR "%s: Resetting controller.\n",
1248 mmc_hostname(host->mmc));
1250 sdhci_reset(host, SDHCI_RESET_CMD);
1251 sdhci_reset(host, SDHCI_RESET_DATA);
1253 host->mrq->cmd->error = -ENOMEDIUM;
1254 tasklet_schedule(&host->finish_tasklet);
1258 spin_unlock_irqrestore(&host->lock, flags);
1260 mmc_detect_change(host->mmc, msecs_to_jiffies(200));
1263 static void sdhci_tasklet_finish(unsigned long param)
1265 struct sdhci_host *host;
1266 unsigned long flags;
1267 struct mmc_request *mrq;
1269 host = (struct sdhci_host*)param;
1271 spin_lock_irqsave(&host->lock, flags);
1273 del_timer(&host->timer);
1278 * The controller needs a reset of internal state machines
1279 * upon error conditions.
1281 if (!(host->flags & SDHCI_DEVICE_DEAD) &&
1283 (mrq->data && (mrq->data->error ||
1284 (mrq->data->stop && mrq->data->stop->error))) ||
1285 (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
1287 /* Some controllers need this kick or reset won't work here */
1288 if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
1291 /* This is to force an update */
1292 clock = host->clock;
1294 sdhci_set_clock(host, clock);
1297 /* Spec says we should do both at the same time, but Ricoh
1298 controllers do not like that. */
1299 sdhci_reset(host, SDHCI_RESET_CMD);
1300 sdhci_reset(host, SDHCI_RESET_DATA);
1307 #ifndef SDHCI_USE_LEDS_CLASS
1308 sdhci_deactivate_led(host);
1312 spin_unlock_irqrestore(&host->lock, flags);
1314 mmc_request_done(host->mmc, mrq);
1317 static void sdhci_timeout_timer(unsigned long data)
1319 struct sdhci_host *host;
1320 unsigned long flags;
1322 host = (struct sdhci_host*)data;
1324 spin_lock_irqsave(&host->lock, flags);
1327 printk(KERN_ERR "%s: Timeout waiting for hardware "
1328 "interrupt.\n", mmc_hostname(host->mmc));
1329 sdhci_dumpregs(host);
1332 host->data->error = -ETIMEDOUT;
1333 sdhci_finish_data(host);
1336 host->cmd->error = -ETIMEDOUT;
1338 host->mrq->cmd->error = -ETIMEDOUT;
1340 tasklet_schedule(&host->finish_tasklet);
1345 spin_unlock_irqrestore(&host->lock, flags);
1348 /*****************************************************************************\
1350 * Interrupt handling *
1352 \*****************************************************************************/
1354 static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
1356 BUG_ON(intmask == 0);
1359 printk(KERN_ERR "%s: Got command interrupt 0x%08x even "
1360 "though no command operation was in progress.\n",
1361 mmc_hostname(host->mmc), (unsigned)intmask);
1362 sdhci_dumpregs(host);
1366 if (intmask & SDHCI_INT_TIMEOUT)
1367 host->cmd->error = -ETIMEDOUT;
1368 else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
1370 host->cmd->error = -EILSEQ;
1372 if (host->cmd->error) {
1373 tasklet_schedule(&host->finish_tasklet);
1378 * The host can send and interrupt when the busy state has
1379 * ended, allowing us to wait without wasting CPU cycles.
1380 * Unfortunately this is overloaded on the "data complete"
1381 * interrupt, so we need to take some care when handling
1384 * Note: The 1.0 specification is a bit ambiguous about this
1385 * feature so there might be some problems with older
1388 if (host->cmd->flags & MMC_RSP_BUSY) {
1389 if (host->cmd->data)
1390 DBG("Cannot wait for busy signal when also "
1391 "doing a data transfer");
1392 else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
1395 /* The controller does not support the end-of-busy IRQ,
1396 * fall through and take the SDHCI_INT_RESPONSE */
1399 if (intmask & SDHCI_INT_RESPONSE)
1400 sdhci_finish_command(host);
1404 static void sdhci_show_adma_error(struct sdhci_host *host)
1406 const char *name = mmc_hostname(host->mmc);
1407 u8 *desc = host->adma_desc;
1412 sdhci_dumpregs(host);
1415 dma = (__le32 *)(desc + 4);
1416 len = (__le16 *)(desc + 2);
1419 DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
1420 name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
1429 static void sdhci_show_adma_error(struct sdhci_host *host) { }
1432 static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
1434 BUG_ON(intmask == 0);
1438 * The "data complete" interrupt is also used to
1439 * indicate that a busy state has ended. See comment
1440 * above in sdhci_cmd_irq().
1442 if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
1443 if (intmask & SDHCI_INT_DATA_END) {
1444 sdhci_finish_command(host);
1449 printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
1450 "though no data operation was in progress.\n",
1451 mmc_hostname(host->mmc), (unsigned)intmask);
1452 sdhci_dumpregs(host);
1457 if (intmask & SDHCI_INT_DATA_TIMEOUT)
1458 host->data->error = -ETIMEDOUT;
1459 else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
1460 host->data->error = -EILSEQ;
1461 else if (intmask & SDHCI_INT_ADMA_ERROR) {
1462 printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
1463 sdhci_show_adma_error(host);
1464 host->data->error = -EIO;
1467 if (host->data->error)
1468 sdhci_finish_data(host);
1470 if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
1471 sdhci_transfer_pio(host);
1474 * We currently don't do anything fancy with DMA
1475 * boundaries, but as we can't disable the feature
1476 * we need to at least restart the transfer.
1478 if (intmask & SDHCI_INT_DMA_END)
1479 sdhci_writel(host, sdhci_readl(host, SDHCI_DMA_ADDRESS),
1482 if (intmask & SDHCI_INT_DATA_END) {
1485 * Data managed to finish before the
1486 * command completed. Make sure we do
1487 * things in the proper order.
1489 host->data_early = 1;
1491 sdhci_finish_data(host);
1497 static irqreturn_t sdhci_irq(int irq, void *dev_id)
1500 struct sdhci_host* host = dev_id;
1504 spin_lock(&host->lock);
1506 intmask = sdhci_readl(host, SDHCI_INT_STATUS);
1508 if (!intmask || intmask == 0xffffffff) {
1513 DBG("*** %s got interrupt: 0x%08x\n",
1514 mmc_hostname(host->mmc), intmask);
1516 if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
1517 sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
1518 SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
1519 tasklet_schedule(&host->card_tasklet);
1522 intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
1524 if (intmask & SDHCI_INT_CMD_MASK) {
1525 sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
1527 sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
1530 if (intmask & SDHCI_INT_DATA_MASK) {
1531 sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
1533 sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
1536 intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
1538 intmask &= ~SDHCI_INT_ERROR;
1540 if (intmask & SDHCI_INT_BUS_POWER) {
1541 printk(KERN_ERR "%s: Card is consuming too much power!\n",
1542 mmc_hostname(host->mmc));
1543 sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
1546 intmask &= ~SDHCI_INT_BUS_POWER;
1548 if (intmask & SDHCI_INT_CARD_INT)
1551 intmask &= ~SDHCI_INT_CARD_INT;
1554 printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
1555 mmc_hostname(host->mmc), intmask);
1556 sdhci_dumpregs(host);
1558 sdhci_writel(host, intmask, SDHCI_INT_STATUS);
1561 result = IRQ_HANDLED;
1565 spin_unlock(&host->lock);
1568 * We have to delay this as it calls back into the driver.
1571 mmc_signal_sdio_irq(host->mmc);
1576 /*****************************************************************************\
1580 \*****************************************************************************/
1584 int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
1588 sdhci_disable_card_detection(host);
1590 ret = mmc_suspend_host(host->mmc, state);
1594 free_irq(host->irq, host);
1599 EXPORT_SYMBOL_GPL(sdhci_suspend_host);
1601 int sdhci_resume_host(struct sdhci_host *host)
1605 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
1606 if (host->ops->enable_dma)
1607 host->ops->enable_dma(host);
1610 ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
1611 mmc_hostname(host->mmc), host);
1615 sdhci_init(host, (host->mmc->pm_flags & MMC_PM_KEEP_POWER));
1618 ret = mmc_resume_host(host->mmc);
1619 sdhci_enable_card_detection(host);
1624 EXPORT_SYMBOL_GPL(sdhci_resume_host);
1626 #endif /* CONFIG_PM */
1628 /*****************************************************************************\
1630 * Device allocation/registration *
1632 \*****************************************************************************/
1634 struct sdhci_host *sdhci_alloc_host(struct device *dev,
1637 struct mmc_host *mmc;
1638 struct sdhci_host *host;
1640 WARN_ON(dev == NULL);
1642 mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
1644 return ERR_PTR(-ENOMEM);
1646 host = mmc_priv(mmc);
1652 EXPORT_SYMBOL_GPL(sdhci_alloc_host);
1654 int sdhci_add_host(struct sdhci_host *host)
1656 struct mmc_host *mmc;
1660 WARN_ON(host == NULL);
1667 host->quirks = debug_quirks;
1669 sdhci_reset(host, SDHCI_RESET_ALL);
1671 host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
1672 host->version = (host->version & SDHCI_SPEC_VER_MASK)
1673 >> SDHCI_SPEC_VER_SHIFT;
1674 if (host->version > SDHCI_SPEC_200) {
1675 printk(KERN_ERR "%s: Unknown controller version (%d). "
1676 "You may experience problems.\n", mmc_hostname(mmc),
1680 caps = sdhci_readl(host, SDHCI_CAPABILITIES);
1682 if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
1683 host->flags |= SDHCI_USE_SDMA;
1684 else if (!(caps & SDHCI_CAN_DO_SDMA))
1685 DBG("Controller doesn't have SDMA capability\n");
1687 host->flags |= SDHCI_USE_SDMA;
1689 if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
1690 (host->flags & SDHCI_USE_SDMA)) {
1691 DBG("Disabling DMA as it is marked broken\n");
1692 host->flags &= ~SDHCI_USE_SDMA;
1695 if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
1696 host->flags |= SDHCI_USE_ADMA;
1698 if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
1699 (host->flags & SDHCI_USE_ADMA)) {
1700 DBG("Disabling ADMA as it is marked broken\n");
1701 host->flags &= ~SDHCI_USE_ADMA;
1704 if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
1705 if (host->ops->enable_dma) {
1706 if (host->ops->enable_dma(host)) {
1707 printk(KERN_WARNING "%s: No suitable DMA "
1708 "available. Falling back to PIO.\n",
1711 ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
1716 if (host->flags & SDHCI_USE_ADMA) {
1718 * We need to allocate descriptors for all sg entries
1719 * (128) and potentially one alignment transfer for
1720 * each of those entries.
1722 host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
1723 host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
1724 if (!host->adma_desc || !host->align_buffer) {
1725 kfree(host->adma_desc);
1726 kfree(host->align_buffer);
1727 printk(KERN_WARNING "%s: Unable to allocate ADMA "
1728 "buffers. Falling back to standard DMA.\n",
1730 host->flags &= ~SDHCI_USE_ADMA;
1735 * If we use DMA, then it's up to the caller to set the DMA
1736 * mask, but PIO does not need the hw shim so we set a new
1737 * mask here in that case.
1739 if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
1740 host->dma_mask = DMA_BIT_MASK(64);
1741 mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
1745 (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
1746 host->max_clk *= 1000000;
1747 if (host->max_clk == 0) {
1748 if (!host->ops->get_max_clock) {
1750 "%s: Hardware doesn't specify base clock "
1751 "frequency.\n", mmc_hostname(mmc));
1754 host->max_clk = host->ops->get_max_clock(host);
1758 (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
1759 if (host->timeout_clk == 0) {
1760 if (host->ops->get_timeout_clock) {
1761 host->timeout_clk = host->ops->get_timeout_clock(host);
1762 } else if (!(host->quirks &
1763 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
1765 "%s: Hardware doesn't specify timeout clock "
1766 "frequency.\n", mmc_hostname(mmc));
1770 if (caps & SDHCI_TIMEOUT_CLK_UNIT)
1771 host->timeout_clk *= 1000;
1774 * Set host parameters.
1776 mmc->ops = &sdhci_ops;
1777 if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK &&
1778 host->ops->set_clock && host->ops->get_min_clock)
1779 mmc->f_min = host->ops->get_min_clock(host);
1781 mmc->f_min = host->max_clk / 256;
1782 mmc->f_max = host->max_clk;
1783 mmc->caps = MMC_CAP_SDIO_IRQ;
1785 if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
1786 mmc->caps |= MMC_CAP_4_BIT_DATA;
1788 if (caps & SDHCI_CAN_DO_HISPD)
1789 mmc->caps |= MMC_CAP_SD_HIGHSPEED;
1791 if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
1792 mmc->caps |= MMC_CAP_NEEDS_POLL;
1795 if (caps & SDHCI_CAN_VDD_330)
1796 mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
1797 if (caps & SDHCI_CAN_VDD_300)
1798 mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
1799 if (caps & SDHCI_CAN_VDD_180)
1800 mmc->ocr_avail |= MMC_VDD_165_195;
1802 if (mmc->ocr_avail == 0) {
1803 printk(KERN_ERR "%s: Hardware doesn't report any "
1804 "support voltages.\n", mmc_hostname(mmc));
1808 spin_lock_init(&host->lock);
1811 * Maximum number of segments. Depends on if the hardware
1812 * can do scatter/gather or not.
1814 if (host->flags & SDHCI_USE_ADMA)
1815 mmc->max_hw_segs = 128;
1816 else if (host->flags & SDHCI_USE_SDMA)
1817 mmc->max_hw_segs = 1;
1819 mmc->max_hw_segs = 128;
1820 mmc->max_phys_segs = 128;
1823 * Maximum number of sectors in one transfer. Limited by DMA boundary
1826 mmc->max_req_size = 524288;
1829 * Maximum segment size. Could be one segment with the maximum number
1830 * of bytes. When doing hardware scatter/gather, each entry cannot
1831 * be larger than 64 KiB though.
1833 if (host->flags & SDHCI_USE_ADMA)
1834 mmc->max_seg_size = 65536;
1836 mmc->max_seg_size = mmc->max_req_size;
1839 * Maximum block size. This varies from controller to controller and
1840 * is specified in the capabilities register.
1842 if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
1843 mmc->max_blk_size = 2;
1845 mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >>
1846 SDHCI_MAX_BLOCK_SHIFT;
1847 if (mmc->max_blk_size >= 3) {
1848 printk(KERN_WARNING "%s: Invalid maximum block size, "
1849 "assuming 512 bytes\n", mmc_hostname(mmc));
1850 mmc->max_blk_size = 0;
1854 mmc->max_blk_size = 512 << mmc->max_blk_size;
1857 * Maximum block count.
1859 mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
1864 tasklet_init(&host->card_tasklet,
1865 sdhci_tasklet_card, (unsigned long)host);
1866 tasklet_init(&host->finish_tasklet,
1867 sdhci_tasklet_finish, (unsigned long)host);
1869 setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
1871 ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
1872 mmc_hostname(mmc), host);
1876 sdhci_init(host, 0);
1878 #ifdef CONFIG_MMC_DEBUG
1879 sdhci_dumpregs(host);
1882 #ifdef SDHCI_USE_LEDS_CLASS
1883 snprintf(host->led_name, sizeof(host->led_name),
1884 "%s::", mmc_hostname(mmc));
1885 host->led.name = host->led_name;
1886 host->led.brightness = LED_OFF;
1887 host->led.default_trigger = mmc_hostname(mmc);
1888 host->led.brightness_set = sdhci_led_control;
1890 ret = led_classdev_register(mmc_dev(mmc), &host->led);
1899 printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
1900 mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
1901 (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
1902 (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
1904 sdhci_enable_card_detection(host);
1908 #ifdef SDHCI_USE_LEDS_CLASS
1910 sdhci_reset(host, SDHCI_RESET_ALL);
1911 free_irq(host->irq, host);
1914 tasklet_kill(&host->card_tasklet);
1915 tasklet_kill(&host->finish_tasklet);
1920 EXPORT_SYMBOL_GPL(sdhci_add_host);
1922 void sdhci_remove_host(struct sdhci_host *host, int dead)
1924 unsigned long flags;
1927 spin_lock_irqsave(&host->lock, flags);
1929 host->flags |= SDHCI_DEVICE_DEAD;
1932 printk(KERN_ERR "%s: Controller removed during "
1933 " transfer!\n", mmc_hostname(host->mmc));
1935 host->mrq->cmd->error = -ENOMEDIUM;
1936 tasklet_schedule(&host->finish_tasklet);
1939 spin_unlock_irqrestore(&host->lock, flags);
1942 sdhci_disable_card_detection(host);
1944 mmc_remove_host(host->mmc);
1946 #ifdef SDHCI_USE_LEDS_CLASS
1947 led_classdev_unregister(&host->led);
1951 sdhci_reset(host, SDHCI_RESET_ALL);
1953 free_irq(host->irq, host);
1955 del_timer_sync(&host->timer);
1957 tasklet_kill(&host->card_tasklet);
1958 tasklet_kill(&host->finish_tasklet);
1960 kfree(host->adma_desc);
1961 kfree(host->align_buffer);
1963 host->adma_desc = NULL;
1964 host->align_buffer = NULL;
1967 EXPORT_SYMBOL_GPL(sdhci_remove_host);
1969 void sdhci_free_host(struct sdhci_host *host)
1971 mmc_free_host(host->mmc);
1974 EXPORT_SYMBOL_GPL(sdhci_free_host);
1976 /*****************************************************************************\
1978 * Driver init/exit *
1980 \*****************************************************************************/
1982 static int __init sdhci_drv_init(void)
1984 printk(KERN_INFO DRIVER_NAME
1985 ": Secure Digital Host Controller Interface driver\n");
1986 printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
1991 static void __exit sdhci_drv_exit(void)
1995 module_init(sdhci_drv_init);
1996 module_exit(sdhci_drv_exit);
1998 module_param(debug_quirks, uint, 0444);
2000 MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
2001 MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
2002 MODULE_LICENSE("GPL");
2004 MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");