drivers/net/wireless/wl12xx/wl1271_spi.c

   1 /*
   2  * This file is part of wl1271
   3  *
   4  * Copyright (C) 2008-2009 Nokia Corporation
   5  *
   6  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful, but
  13  * WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15  * General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20  * 02110-1301 USA
  21  *
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/platform_device.h>
  26 #include <linux/crc7.h>
  27 #include <linux/spi/spi.h>
  28
  29 #include "wl1271.h"
  30 #include "wl12xx_80211.h"
  31 #include "wl1271_spi.h"
  32
  33
  34 void wl1271_spi_reset(struct wl1271 *wl)
  35 {
  36         u8 *cmd;
  37         struct spi_transfer t;
  38         struct spi_message m;
  39
  40         cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
  41         if (!cmd) {
  42                 wl1271_error("could not allocate cmd for spi reset");
  43                 return;
  44         }
  45
  46         memset(&t, 0, sizeof(t));
  47         spi_message_init(&m);
  48
  49         memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
  50
  51         t.tx_buf = cmd;
  52         t.len = WSPI_INIT_CMD_LEN;
  53         spi_message_add_tail(&t, &m);
  54
  55         spi_sync(wl->spi, &m);
  56
  57         wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
  58 }
  59
  60 void wl1271_spi_init(struct wl1271 *wl)
  61 {
  62         u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
  63         struct spi_transfer t;
  64         struct spi_message m;
  65
  66         cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
  67         if (!cmd) {
  68                 wl1271_error("could not allocate cmd for spi init");
  69                 return;
  70         }
  71
  72         memset(crc, 0, sizeof(crc));
  73         memset(&t, 0, sizeof(t));
  74         spi_message_init(&m);
  75
  76         /*
  77          * Set WSPI_INIT_COMMAND
  78          * the data is being send from the MSB to LSB
  79          */
  80         cmd[2] = 0xff;
  81         cmd[3] = 0xff;
  82         cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
  83         cmd[0] = 0;
  84         cmd[7] = 0;
  85         cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
  86         cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
  87
  88         if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
  89                 cmd[5] |=  WSPI_INIT_CMD_DIS_FIXEDBUSY;
  90         else
  91                 cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
  92
  93         cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
  94                 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
  95
  96         crc[0] = cmd[1];
  97         crc[1] = cmd[0];
  98         crc[2] = cmd[7];
  99         crc[3] = cmd[6];
 100         crc[4] = cmd[5];
 101
 102         cmd[4] |= crc7(0, crc, WSPI_INIT_CMD_CRC_LEN) << 1;
 103         cmd[4] |= WSPI_INIT_CMD_END;
 104
 105         t.tx_buf = cmd;
 106         t.len = WSPI_INIT_CMD_LEN;
 107         spi_message_add_tail(&t, &m);
 108
 109         spi_sync(wl->spi, &m);
 110
 111         wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
 112 }
 113
 114 #define WL1271_BUSY_WORD_TIMEOUT 1000
 115
 116 /* FIXME: Check busy words, removed due to SPI bug */
 117 #if 0
 118 static void wl1271_spi_read_busy(struct wl1271 *wl, void *buf, size_t len)
 119 {
 120         struct spi_transfer t[1];
 121         struct spi_message m;
 122         u32 *busy_buf;
 123         int num_busy_bytes = 0;
 124
 125         wl1271_info("spi read BUSY!");
 126
 127         /*
 128          * Look for the non-busy word in the read buffer, and if found,
 129          * read in the remaining data into the buffer.
 130          */
 131         busy_buf = (u32 *)buf;
 132         for (; (u32)busy_buf < (u32)buf + len; busy_buf++) {
 133                 num_busy_bytes += sizeof(u32);
 134                 if (*busy_buf & 0x1) {
 135                         spi_message_init(&m);
 136                         memset(t, 0, sizeof(t));
 137                         memmove(buf, busy_buf, len - num_busy_bytes);
 138                         t[0].rx_buf = buf + (len - num_busy_bytes);
 139                         t[0].len = num_busy_bytes;
 140                         spi_message_add_tail(&t[0], &m);
 141                         spi_sync(wl->spi, &m);
 142                         return;
 143                 }
 144         }
 145
 146         /*
 147          * Read further busy words from SPI until a non-busy word is
 148          * encountered, then read the data itself into the buffer.
 149          */
 150         wl1271_info("spi read BUSY-polling needed!");
 151
 152         num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
 153         busy_buf = wl->buffer_busyword;
 154         while (num_busy_bytes) {
 155                 num_busy_bytes--;
 156                 spi_message_init(&m);
 157                 memset(t, 0, sizeof(t));
 158                 t[0].rx_buf = busy_buf;
 159                 t[0].len = sizeof(u32);
 160                 spi_message_add_tail(&t[0], &m);
 161                 spi_sync(wl->spi, &m);
 162
 163                 if (*busy_buf & 0x1) {
 164                         spi_message_init(&m);
 165                         memset(t, 0, sizeof(t));
 166                         t[0].rx_buf = buf;
 167                         t[0].len = len;
 168                         spi_message_add_tail(&t[0], &m);
 169                         spi_sync(wl->spi, &m);
 170                         return;
 171                 }
 172         }
 173
 174         /* The SPI bus is unresponsive, the read failed. */
 175         memset(buf, 0, len);
 176         wl1271_error("SPI read busy-word timeout!\n");
 177 }
 178 #endif
 179
 180 void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
 181                          size_t len, bool fixed)
 182 {
 183         struct spi_transfer t[3];
 184         struct spi_message m;
 185         u32 *busy_buf;
 186         u32 *cmd;
 187
 188         cmd = &wl->buffer_cmd;
 189         busy_buf = wl->buffer_busyword;
 190
 191         *cmd = 0;
 192         *cmd |= WSPI_CMD_READ;
 193         *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
 194         *cmd |= addr & WSPI_CMD_BYTE_ADDR;
 195
 196         if (fixed)
 197                 *cmd |= WSPI_CMD_FIXED;
 198
 199         spi_message_init(&m);
 200         memset(t, 0, sizeof(t));
 201
 202         t[0].tx_buf = cmd;
 203         t[0].len = 4;
 204         spi_message_add_tail(&t[0], &m);
 205
 206         /* Busy and non busy words read */
 207         t[1].rx_buf = busy_buf;
 208         t[1].len = WL1271_BUSY_WORD_LEN;
 209         spi_message_add_tail(&t[1], &m);
 210
 211         t[2].rx_buf = buf;
 212         t[2].len = len;
 213         spi_message_add_tail(&t[2], &m);
 214
 215         spi_sync(wl->spi, &m);
 216
 217         /* FIXME: Check busy words, removed due to SPI bug */
 218         /* if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1))
 219            wl1271_spi_read_busy(wl, buf, len); */
 220
 221         wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
 222         wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
 223 }
 224
 225 void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 226                           size_t len, bool fixed)
 227 {
 228         struct spi_transfer t[2];
 229         struct spi_message m;
 230         u32 *cmd;
 231
 232         cmd = &wl->buffer_cmd;
 233
 234         *cmd = 0;
 235         *cmd |= WSPI_CMD_WRITE;
 236         *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
 237         *cmd |= addr & WSPI_CMD_BYTE_ADDR;
 238
 239         if (fixed)
 240                 *cmd |= WSPI_CMD_FIXED;
 241
 242         spi_message_init(&m);
 243         memset(t, 0, sizeof(t));
 244
 245         t[0].tx_buf = cmd;
 246         t[0].len = sizeof(*cmd);
 247         spi_message_add_tail(&t[0], &m);
 248
 249         t[1].tx_buf = buf;
 250         t[1].len = len;
 251         spi_message_add_tail(&t[1], &m);
 252
 253         spi_sync(wl->spi, &m);
 254
 255         wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
 256         wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
 257 }