mx6qsabresd: add usdhc2 and usdhc4 support

The on-board number of available usdhc devices is something board
specific.  The patch moves CONFIG_SYS_FSL_USDHC_NUM out of
mx6qsabre_common.h and adds usdhc2 and usdhc4 support for mx6qsabresd
board.

To keep the default mmc device for environment same as before (usdhc3),
it moves CONFIG_SYS_MMC_ENV_DEV out of mx6qsabre_common.h and changes
it to 1 for mx6qsabresd.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 0240fb5..65c4a1a 100644 (file)
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -86,6 +86,20 @@ static void setup_iomux_enet(void)
        gpio_set_value(IMX_GPIO_NR(1, 25), 1);
 }
 
+iomux_v3_cfg_t const usdhc2_pads[] = {
+       MX6Q_PAD_SD2_CLK__USDHC2_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD2_CMD__USDHC2_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD2_DAT0__USDHC2_DAT0  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD2_DAT1__USDHC2_DAT1  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD2_DAT2__USDHC2_DAT2  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD2_DAT3__USDHC2_DAT3  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_NANDF_D4__USDHC2_DAT4  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_NANDF_D5__USDHC2_DAT5  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_NANDF_D6__USDHC2_DAT6  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_NANDF_D7__USDHC2_DAT7  | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_NANDF_D2__GPIO_2_2     | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
 iomux_v3_cfg_t const usdhc3_pads[] = {
        MX6Q_PAD_SD3_CLK__USDHC3_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
        MX6Q_PAD_SD3_CMD__USDHC3_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -100,28 +114,82 @@ iomux_v3_cfg_t const usdhc3_pads[] = {
        MX6Q_PAD_NANDF_D0__GPIO_2_0    | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
 };
 
+iomux_v3_cfg_t const usdhc4_pads[] = {
+       MX6Q_PAD_SD4_CLK__USDHC4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_CMD__USDHC4_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+       MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
 static void setup_iomux_uart(void)
 {
        imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 }
 
 #ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
+struct fsl_esdhc_cfg usdhc_cfg[3] = {
+       {USDHC2_BASE_ADDR},
        {USDHC3_BASE_ADDR},
+       {USDHC4_BASE_ADDR},
 };
 
+#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0)
+
 int board_mmc_getcd(struct mmc *mmc)
 {
-       gpio_direction_input(IMX_GPIO_NR(2, 0));
-       return !gpio_get_value(IMX_GPIO_NR(2, 0));
+       struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+       switch (cfg->esdhc_base) {
+       case USDHC2_BASE_ADDR:
+               return !gpio_get_value(USDHC2_CD_GPIO);
+       case USDHC3_BASE_ADDR:
+               return !gpio_get_value(USDHC3_CD_GPIO);
+       default:
+               return 1; /* eMMC/uSDHC4 is always present */
+       }
 }
 
 int board_mmc_init(bd_t *bis)
 {
-       imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+       int i;
+
+       for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+               switch (i) {
+               case 0:
+                       imx_iomux_v3_setup_multiple_pads(
+                               usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+                       gpio_direction_input(USDHC2_CD_GPIO);
+                       usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+                       break;
+               case 1:
+                       imx_iomux_v3_setup_multiple_pads(
+                               usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+                       gpio_direction_input(USDHC3_CD_GPIO);
+                       usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+                       break;
+               case 2:
+                       imx_iomux_v3_setup_multiple_pads(
+                               usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+                       usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+                       break;
+               default:
+                       printf("Warning: you configured more USDHC controllers"
+                               "(%d) than supported by the board\n", i + 1);
+                       return 0;
+              }
+
+              if (fsl_esdhc_initialize(bis, &usdhc_cfg[i]))
+                       printf("Warning: failed to initialize mmc dev %d\n", i);
+       }
 
-       usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-       return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+       return 0;
 }
 #endif
 

diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index 9a25480..bd2fb10 100644 (file)
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -41,7 +41,6 @@
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_USDHC_NUM       2
 
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
@@ -166,7 +165,6 @@
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV         0
 #endif
 
 #define CONFIG_OF_LIBFDT

diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index 760f3ce..f1ff201 100644 (file)
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -20,4 +20,9 @@
 
 #include "mx6qsabre_common.h"
 
+#define CONFIG_SYS_FSL_USDHC_NUM       2
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#endif
+
 #endif                         /* __MX6QSABREAUTO_CONFIG_H */

diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h
index 771d129..227d410 100644 (file)
--- a/include/configs/mx6qsabresd.h
+++ b/include/configs/mx6qsabresd.h
@@ -25,4 +25,9 @@
 
 #include "mx6qsabre_common.h"
 
+#define CONFIG_SYS_FSL_USDHC_NUM       3
+#if defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_SYS_MMC_ENV_DEV         1
+#endif
+
 #endif                         /* __MX6QSABRESD_CONFIG_H */