at91rm9200: rename lowlevel init value to CONFIG_SYS_

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

diff --git a/board/m501sk/memsetup.S b/board/m501sk/memsetup.S
index 6aea723..1a3ca4b 100644 (file)
--- a/board/m501sk/memsetup.S
+++ b/board/m501sk/memsetup.S
@@ -41,50 +41,50 @@
 
 /* flash */
 #define MC_PUIA 0xFFFFFF10
-#define MC_PUIA_VAL 0x00000000
+#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
 #define MC_PUP 0xFFFFFF50
-#define MC_PUP_VAL 0x00000000
+#define CONFIG_SYS_MC_PUP_VAL 0x00000000
 #define MC_PUER 0xFFFFFF54
-#define MC_PUER_VAL 0x00000000
+#define CONFIG_SYS_MC_PUER_VAL 0x00000000
 #define MC_ASR 0xFFFFFF04
-#define MC_ASR_VAL 0x00000000
+#define CONFIG_SYS_MC_ASR_VAL 0x00000000
 #define MC_AASR 0xFFFFFF08
-#define MC_AASR_VAL 0x00000000
+#define CONFIG_SYS_MC_AASR_VAL 0x00000000
 #define EBI_CFGR 0xFFFFFF64
-#define EBI_CFGR_VAL 0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
 #define SMC_CSR0 0xFFFFFF70
-#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
 #define PLLAR 0xFFFFFC28
-#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
+#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
 #define PLLBR 0xFFFFFC2C
-#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
 #define MCKR 0xFFFFFC30
 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-#define MCKR_VAL       0x00000202
+#define CONFIG_SYS_MCKR_VAL    0x00000202
 
 /* sdram */
 #define PIOC_ASR 0xFFFFF870
-#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as Perip (D16/D31) */
+#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as Perip (D16/D31) */
 #define PIOC_BSR 0xFFFFF874
-#define PIOC_BSR_VAL 0x00000000
+#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
 #define PIOC_PDR 0xFFFFF804
-#define PIOC_PDR_VAL 0xFFFF0000
+#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
 #define EBI_CSA 0xFFFFFF60
-#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
+#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
 #define SDRC_CR 0xFFFFFF98
-#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */
-#define SDRAM 0x20000000 /* address of the SDRAM */
-#define SDRAM1 0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
 #define SDRC_MR 0xFFFFFF90
-#define SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1 0x00000004 /* refresh */
-#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
 #define SDRC_TR 0xFFFFFF94
-#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
 
 _TEXT_BASE:
        .word   TEXT_BASE
@@ -130,71 +130,71 @@ lowlevelinit:
 
 SMRDATA:
        .word MC_PUIA
-       .word MC_PUIA_VAL
+       .word CONFIG_SYS_MC_PUIA_VAL
        .word MC_PUP
-       .word MC_PUP_VAL
+       .word CONFIG_SYS_MC_PUP_VAL
        .word MC_PUER
-       .word MC_PUER_VAL
+       .word CONFIG_SYS_MC_PUER_VAL
        .word MC_ASR
-       .word MC_ASR_VAL
+       .word CONFIG_SYS_MC_ASR_VAL
        .word MC_AASR
-       .word MC_AASR_VAL
+       .word CONFIG_SYS_MC_AASR_VAL
        .word EBI_CFGR
-       .word EBI_CFGR_VAL
+       .word CONFIG_SYS_EBI_CFGR_VAL
        .word SMC_CSR0
-       .word SMC_CSR0_VAL
+       .word CONFIG_SYS_SMC_CSR0_VAL
        .word PLLAR
-       .word PLLAR_VAL
+       .word CONFIG_SYS_PLLAR_VAL
        .word PLLBR
-       .word PLLBR_VAL
+       .word CONFIG_SYS_PLLBR_VAL
        .word MCKR
-       .word MCKR_VAL
+       .word CONFIG_SYS_MCKR_VAL
        /* SMRDATA is 80 bytes long */
        /* here there's a delay of 100 */
 SMRDATA1:
        .word PIOC_ASR
-       .word PIOC_ASR_VAL
+       .word CONFIG_SYS_PIOC_ASR_VAL
        .word PIOC_BSR
-       .word PIOC_BSR_VAL
+       .word CONFIG_SYS_PIOC_BSR_VAL
        .word PIOC_PDR
-       .word PIOC_PDR_VAL
+       .word CONFIG_SYS_PIOC_PDR_VAL
        .word EBI_CSA
-       .word EBI_CSA_VAL
+       .word CONFIG_SYS_EBI_CSA_VAL
        .word SDRC_CR
-       .word SDRC_CR_VAL
+       .word CONFIG_SYS_SDRC_CR_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL1
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL1
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL2
-       .word SDRAM1
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL2
+       .word CONFIG_SYS_SDRAM1
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_TR
-       .word SDRC_TR_VAL
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_TR_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL3
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL3
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        /* SMRDATA1 is 176 bytes long */
 #endif /* CONFIG_BOOTBINFUNC */

diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S
index 66b07da..736f1ea 100644 (file)
--- a/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ b/cpu/arm920t/at91rm9200/lowlevel_init.S
@@ -135,71 +135,71 @@ LoopOsc:
 
 SMRDATA:
        .word MC_PUIA
-       .word MC_PUIA_VAL
+       .word CONFIG_SYS_MC_PUIA_VAL
        .word MC_PUP
-       .word MC_PUP_VAL
+       .word CONFIG_SYS_MC_PUP_VAL
        .word MC_PUER
-       .word MC_PUER_VAL
+       .word CONFIG_SYS_MC_PUER_VAL
        .word MC_ASR
-       .word MC_ASR_VAL
+       .word CONFIG_SYS_MC_ASR_VAL
        .word MC_AASR
-       .word MC_AASR_VAL
+       .word CONFIG_SYS_MC_AASR_VAL
        .word EBI_CFGR
-       .word EBI_CFGR_VAL
+       .word CONFIG_SYS_EBI_CFGR_VAL
        .word SMC_CSR0
-       .word SMC_CSR0_VAL
+       .word CONFIG_SYS_SMC_CSR0_VAL
        .word PLLAR
-       .word PLLAR_VAL
+       .word CONFIG_SYS_PLLAR_VAL
        .word PLLBR
-       .word PLLBR_VAL
+       .word CONFIG_SYS_PLLBR_VAL
        .word MCKR
-       .word MCKR_VAL
+       .word CONFIG_SYS_MCKR_VAL
        /* SMRDATA is 80 bytes long */
        /* here there's a delay of 100 */
 SMRDATA1:
        .word PIOC_ASR
-       .word PIOC_ASR_VAL
+       .word CONFIG_SYS_PIOC_ASR_VAL
        .word PIOC_BSR
-       .word PIOC_BSR_VAL
+       .word CONFIG_SYS_PIOC_BSR_VAL
        .word PIOC_PDR
-       .word PIOC_PDR_VAL
+       .word CONFIG_SYS_PIOC_PDR_VAL
        .word EBI_CSA
-       .word EBI_CSA_VAL
+       .word CONFIG_SYS_EBI_CSA_VAL
        .word SDRC_CR
-       .word SDRC_CR_VAL
+       .word CONFIG_SYS_SDRC_CR_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL1
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL1
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL2
-       .word SDRAM1
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL2
+       .word CONFIG_SYS_SDRAM1
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_TR
-       .word SDRC_TR_VAL
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_TR_VAL
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        .word SDRC_MR
-       .word SDRC_MR_VAL3
-       .word SDRAM
-       .word SDRAM_VAL
+       .word CONFIG_SYS_SDRC_MR_VAL3
+       .word CONFIG_SYS_SDRAM
+       .word CONFIG_SYS_SDRAM_VAL
        /* SMRDATA1 is 176 bytes long */
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */

diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 746f0ef..c7e83cc 100644 (file)
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -45,33 +45,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR         1
 /* flash */
-#define MC_PUIA_VAL    0x00000000
-#define MC_PUP_VAL     0x00000000
-#define MC_PUER_VAL    0x00000000
-#define MC_ASR_VAL     0x00000000
-#define MC_AASR_VAL    0x00000000
-#define EBI_CFGR_VAL   0x00000000
-#define SMC_CSR0_VAL   0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
+#define CONFIG_SYS_MC_PUP_VAL  0x00000000
+#define CONFIG_SYS_MC_PUER_VAL 0x00000000
+#define CONFIG_SYS_MC_ASR_VAL  0x00000000
+#define CONFIG_SYS_MC_AASR_VAL 0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL        0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL      0x20263E04 /* 179.712000 MHz for PCK */
-#define PLLBR_VAL      0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR_VAL       0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL   0x20263E04 /* 179.712000 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL   0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL    0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL   0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL   0x00000000
-#define PIOC_PDR_VAL   0xFFFF0000
-#define EBI_CSA_VAL    0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL    0x2188c155 /* set up the SDRAM */
-#define SDRAM          0x20000000 /* address of the SDRAM */
-#define SDRAM1         0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL      0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL    0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1   0x00000004 /* refresh */
-#define SDRC_MR_VAL2   0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3   0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL    0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL        0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL        0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL        0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM       0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1      0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL   0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1        0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */

diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index cdd308d..d9acb47 100644 (file)
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -44,33 +44,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR         1
 /* flash */
-#define MC_PUIA_VAL    0x00000000
-#define MC_PUP_VAL     0x00000000
-#define MC_PUER_VAL    0x00000000
-#define MC_ASR_VAL     0x00000000
-#define MC_AASR_VAL    0x00000000
-#define EBI_CFGR_VAL   0x00000000
-#define SMC_CSR0_VAL   0x100032ad /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
+#define CONFIG_SYS_MC_PUP_VAL  0x00000000
+#define CONFIG_SYS_MC_PUER_VAL 0x00000000
+#define CONFIG_SYS_MC_ASR_VAL  0x00000000
+#define CONFIG_SYS_MC_AASR_VAL 0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL        0x100032ad /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL      0x2026BE04 /* 179,712 MHz for PCK */
-#define PLLBR_VAL      0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR_VAL       0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL   0x2026BE04 /* 179,712 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL   0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL    0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL   0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL   0x00000000
-#define PIOC_PDR_VAL   0xFFFF0000
-#define EBI_CSA_VAL    0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL    0x3399c1d4 /* set up the SDRAM */
-#define SDRAM          0x20000000 /* address of the SDRAM */
-#define SDRAM1         0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL      0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL    0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1   0x00000004 /* refresh */
-#define SDRC_MR_VAL2   0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3   0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL    0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL        0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL        0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL        0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM       0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1      0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL   0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1        0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */

diff --git a/include/configs/csb637.h b/include/configs/csb637.h
index 682db44..2df77cf 100644 (file)
--- a/include/configs/csb637.h
+++ b/include/configs/csb637.h
@@ -45,33 +45,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR         1
 /* flash */
-#define MC_PUIA_VAL    0x00000000
-#define MC_PUP_VAL     0x00000000
-#define MC_PUER_VAL    0x00000000
-#define MC_ASR_VAL     0x00000000
-#define MC_AASR_VAL    0x00000000
-#define EBI_CFGR_VAL   0x00000000
-#define SMC_CSR0_VAL   0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
+#define CONFIG_SYS_MC_PUP_VAL  0x00000000
+#define CONFIG_SYS_MC_PUER_VAL 0x00000000
+#define CONFIG_SYS_MC_ASR_VAL  0x00000000
+#define CONFIG_SYS_MC_AASR_VAL 0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL        0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL      0x2031BE01 /* 184.320000 MHz for PCK */
-#define PLLBR_VAL      0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */
-#define MCKR_VAL       0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL   0x2031BE01 /* 184.320000 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL   0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL    0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL   0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL   0x00000000
-#define PIOC_PDR_VAL   0xFFFF0000
-#define EBI_CSA_VAL    0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL    0x21914159 /* set up the SDRAM */
-#define SDRAM          0x20000000 /* address of the SDRAM */
-#define SDRAM1         0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL      0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL    0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1   0x00000004 /* refresh */
-#define SDRC_MR_VAL2   0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3   0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL    0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL        0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL        0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL        0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM       0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1      0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL   0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1        0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */

diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index cbbdb0c..fb10616 100644 (file)
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -49,33 +49,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
 /* flash */
-#define MC_PUIA_VAL    0x00000000
-#define MC_PUP_VAL     0x00000000
-#define MC_PUER_VAL    0x00000000
-#define MC_ASR_VAL     0x00000000
-#define MC_AASR_VAL    0x00000000
-#define EBI_CFGR_VAL   0x00000000
-#define SMC_CSR0_VAL   0x00003084 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
+#define CONFIG_SYS_MC_PUP_VAL  0x00000000
+#define CONFIG_SYS_MC_PUER_VAL 0x00000000
+#define CONFIG_SYS_MC_ASR_VAL  0x00000000
+#define CONFIG_SYS_MC_AASR_VAL 0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL        0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL        0x00003084 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL      0x20263E04 /* 180 MHz for PCK */
-#define PLLBR_VAL      0x1048bE0E /* 48 MHz (divider by 2 for USB) */
-#define MCKR_VAL       0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL   0x20263E04 /* 180 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL   0x1048bE0E /* 48 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL    0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL   0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL   0x00000000
-#define PIOC_PDR_VAL   0xFFFF0000
-#define EBI_CSA_VAL    0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL    0x3211295A /* set up the SDRAM */
-#define SDRAM          0x20000000 /* address of the SDRAM */
-#define SDRAM1         0x20000020 /* address of the SDRAM */
-#define SDRAM_VAL      0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL    0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1   0x00000004 /* refresh */
-#define SDRC_MR_VAL2   0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3   0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL    0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL        0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL        0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL        0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL 0x3211295A /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM       0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1      0x20000020 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL   0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1        0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2        0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3        0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */