obj-$(CONFIG_CMD_BMP) += bmp.o
obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o
obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o
-obj-$(CONFIG_CMD_BOOTLDR) += bootldr.o
obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o
obj-$(CONFIG_CMD_BOOTZ) += bootz.o
obj-$(CONFIG_CMD_BOOTI) += booti.o
obj-$(CONFIG_CMD_CLK) += clk.o
obj-$(CONFIG_CMD_CONFIG) += config.o
obj-$(CONFIG_CMD_CONSOLE) += console.o
-obj-$(CONFIG_CMD_CPLBINFO) += cplbinfo.o
obj-$(CONFIG_CMD_CPU) += cpu.o
obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o
obj-$(CONFIG_CMD_DATE) += date.o
obj-$(CONFIG_CMD_ITEST) += itest.o
obj-$(CONFIG_CMD_JFFS2) += jffs2.o
obj-$(CONFIG_CMD_CRAMFS) += cramfs.o
-obj-$(CONFIG_CMD_LDRINFO) += ldrinfo.o
obj-$(CONFIG_LED_STATUS_CMD) += legacy_led.o
obj-$(CONFIG_CMD_LED) += led.o
obj-$(CONFIG_CMD_LICENSE) += license.o
obj-$(CONFIG_CMD_NAND) += nand.o
obj-$(CONFIG_CMD_NET) += net.o
obj-$(CONFIG_CMD_ONENAND) += onenand.o
-obj-$(CONFIG_CMD_OTP) += otp.o
obj-$(CONFIG_CMD_PART) += part.o
ifdef CONFIG_PCI
obj-$(CONFIG_CMD_PCI) += pci.o
obj-$(CONFIG_SCSI) += scsi.o disk.o
obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
-obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o
obj-$(CONFIG_CMD_SPI) += spi.o
-obj-$(CONFIG_CMD_SPIBOOTLDR) += spibootldr.o
obj-$(CONFIG_CMD_STRINGS) += strings.o
obj-$(CONFIG_CMD_TERMINAL) += terminal.o
obj-$(CONFIG_CMD_TIME) += time.o
+++ /dev/null
-/*
- * U-Boot - bootldr.c
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/bootrom.h>
-
-/* Simple sanity check on the specified address to make sure it contains
- * an LDR image of some sort.
- */
-static bool ldr_valid_signature(uint8_t *data)
-{
-#if defined(__ADSPBF561__)
-
- /* BF56x has a 4 byte global header */
- if (data[3] == (GFLAG_56X_SIGN_MAGIC << (GFLAG_56X_SIGN_SHIFT - 24)))
- return true;
-
-#elif defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
- defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__)
-
- /* all the BF53x should start at this address mask */
- uint32_t addr;
- memmove(&addr, data, sizeof(addr));
- if ((addr & 0xFF0FFF0F) == 0xFF000000)
- return true;
-#else
-
- /* everything newer has a magic byte */
- uint32_t count;
- memmove(&count, data + 8, sizeof(count));
- if (data[3] == 0xAD && count == 0)
- return true;
-
-#endif
-
- return false;
-}
-
-/* If the Blackfin is new enough, the Blackfin on-chip ROM supports loading
- * LDRs from random memory addresses. So whenever possible, use that. In
- * the older cases (BF53x/BF561), parse the LDR format ourselves.
- */
-static void ldr_load(uint8_t *base_addr)
-{
-#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
- /*defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) ||*/\
- defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__)
-
- uint32_t addr;
- uint32_t count;
- uint16_t flags;
-
- /* the bf56x has a 4 byte global header ... but it is useless to
- * us when booting an LDR from a memory address, so skip it
- */
-# ifdef __ADSPBF561__
- base_addr += 4;
-# endif
-
- memmove(&flags, base_addr + 8, sizeof(flags));
- bfin_write_EVT1(flags & BFLAG_53X_RESVECT ? 0xFFA00000 : 0xFFA08000);
-
- do {
- /* block header may not be aligned */
- memmove(&addr, base_addr, sizeof(addr));
- memmove(&count, base_addr+4, sizeof(count));
- memmove(&flags, base_addr+8, sizeof(flags));
- base_addr += sizeof(addr) + sizeof(count) + sizeof(flags);
-
- printf("loading to 0x%08x (%#x bytes) flags: 0x%04x\n",
- addr, count, flags);
-
- if (!(flags & BFLAG_53X_IGNORE)) {
- if (flags & BFLAG_53X_ZEROFILL)
- memset((void *)addr, 0x00, count);
- else
- memcpy((void *)addr, base_addr, count);
-
- if (flags & BFLAG_53X_INIT) {
- void (*init)(void) = (void *)addr;
- init();
- }
- }
-
- if (!(flags & BFLAG_53X_ZEROFILL))
- base_addr += count;
- } while (!(flags & BFLAG_53X_FINAL));
-
-#endif
-}
-
-/* For BF537, we use the _BOOTROM_BOOT_DXE_FLASH funky ROM function.
- * For all other BF53x/BF56x, we just call the entry point.
- * For everything else (newer), we use _BOOTROM_MEMBOOT ROM function.
- */
-static void ldr_exec(void *addr)
-{
-#if defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
-
- /* restore EVT1 to reset value as this is what the bootrom uses as
- * the default entry point when booting the final block of LDRs
- */
- bfin_write_EVT1(L1_INST_SRAM);
- __asm__("call (%0);" : : "a"(_BOOTROM_MEMBOOT), "q7"(addr) : "RETS", "memory");
-
-#elif defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__)
-
- void (*ldr_entry)(void) = (void *)bfin_read_EVT1();
- ldr_entry();
-
-#else
-
- int32_t (*BOOTROM_MEM)(void *, int32_t, int32_t, void *) = (void *)_BOOTROM_MEMBOOT;
- BOOTROM_MEM(addr, 0, 0, NULL);
-
-#endif
-}
-
-/*
- * the bootldr command loads an address, checks to see if there
- * is a Boot stream that the on-chip BOOTROM can understand,
- * and loads it via the BOOTROM Callback. It is possible
- * to also add booting from SPI, or TWI, but this function does
- * not currently support that.
- */
-int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- void *addr;
-
- /* Get the address */
- if (argc < 2)
- addr = (void *)load_addr;
- else
- addr = (void *)simple_strtoul(argv[1], NULL, 16);
-
- /* Check if it is a LDR file */
- if (ldr_valid_signature(addr)) {
- printf("## Booting ldr image at 0x%p ...\n", addr);
- ldr_load(addr);
-
- icache_disable();
- dcache_disable();
-
- ldr_exec(addr);
- } else
- printf("## No ldr image at address 0x%p\n", addr);
-
- return 0;
-}
-
-U_BOOT_CMD(
- bootldr, 2, 0, do_bootldr,
- "boot ldr image from memory",
- "[addr]\n"
- ""
-);
+++ /dev/null
-/*
- * cmd_cplbinfo.c - dump the instruction/data cplb tables
- *
- * Copyright (c) 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/cplb.h>
-#include <asm/mach-common/bits/mpu.h>
-
-/*
- * Translate the PAGE_SIZE bits into a human string
- */
-static const char *cplb_page_size(uint32_t data)
-{
- static const char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" };
- return page_size_string_table[(data & PAGE_SIZE_MASK) >> PAGE_SIZE_SHIFT];
-}
-
-/*
- * show a hardware cplb table
- */
-static void show_cplb_table(uint32_t *addr, uint32_t *data)
-{
- int i;
- printf(" Address Data Size Valid Locked\n");
- for (i = 1; i <= 16; ++i) {
- printf(" %2i 0x%p 0x%05X %s %c %c\n",
- i, (void *)*addr, *data,
- cplb_page_size(*data),
- (*data & CPLB_VALID ? 'Y' : 'N'),
- (*data & CPLB_LOCK ? 'Y' : 'N'));
- ++addr;
- ++data;
- }
-}
-
-/*
- * display current instruction and data cplb tables
- */
-int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- printf("%s CPLB table [%08x]:\n", "Instruction", *(uint32_t *)DMEM_CONTROL);
- show_cplb_table((uint32_t *)ICPLB_ADDR0, (uint32_t *)ICPLB_DATA0);
-
- printf("%s CPLB table [%08x]:\n", "Data", *(uint32_t *)IMEM_CONTROL);
- show_cplb_table((uint32_t *)DCPLB_ADDR0, (uint32_t *)DCPLB_DATA0);
-
- return 0;
-}
-
-U_BOOT_CMD(
- cplbinfo, 1, 0, do_cplbinfo,
- "display current CPLB tables",
- ""
-);
+++ /dev/null
-/*
- * U-Boot - ldrinfo
- *
- * Copyright (c) 2010 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/bootrom.h>
-
-static uint32_t ldrinfo_header(const void *addr)
-{
- uint32_t skip = 0;
-
-#if defined(__ADSPBF561__)
- /* BF56x has a 4 byte global header */
- uint32_t header, sign;
- static const char * const spi_speed[] = {
- "500K", "1M", "2M", "??",
- };
-
- memcpy(&header, addr, sizeof(header));
-
- sign = (header & GFLAG_56X_SIGN_MASK) >> GFLAG_56X_SIGN_SHIFT;
- printf("Header: %08X ( %s-bit-flash wait:%i hold:%i spi:%s %s)\n",
- header,
- (header & GFLAG_56X_16BIT_FLASH) ? "16" : "8",
- (header & GFLAG_56X_WAIT_MASK) >> GFLAG_56X_WAIT_SHIFT,
- (header & GFLAG_56X_HOLD_MASK) >> GFLAG_56X_HOLD_SHIFT,
- spi_speed[(header & GFLAG_56X_SPI_MASK) >> GFLAG_56X_SPI_SHIFT],
- sign == GFLAG_56X_SIGN_MAGIC ? "" : "!!hdrsign!! ");
-
- skip = 4;
-#endif
-
- /* |Block @ 12345678: 12345678 12345678 12345678 12345678 | */
-#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
- defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__)
- printf(" Address Count Flags\n");
-#else
- printf(" BCode Address Count Argument\n");
-#endif
-
- return skip;
-}
-
-struct ldr_flag {
- uint16_t flag;
- const char *desc;
-};
-
-static uint32_t ldrinfo_block(const void *base_addr)
-{
- uint32_t count;
-
- printf("Block @ %08X: ", (uint32_t)base_addr);
-
-#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
- defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__)
-
- uint32_t addr, pval;
- uint16_t flags;
- int i;
- static const struct ldr_flag ldr_flags[] = {
- { BFLAG_53X_ZEROFILL, "zerofill" },
- { BFLAG_53X_RESVECT, "resvect" },
- { BFLAG_53X_INIT, "init" },
- { BFLAG_53X_IGNORE, "ignore" },
- { BFLAG_53X_COMPRESSED, "compressed"},
- { BFLAG_53X_FINAL, "final" },
- };
-
- memcpy(&addr, base_addr, sizeof(addr));
- memcpy(&count, base_addr+4, sizeof(count));
- memcpy(&flags, base_addr+8, sizeof(flags));
-
- printf("%08X %08X %04X ( ", addr, count, flags);
-
- for (i = 0; i < ARRAY_SIZE(ldr_flags); ++i)
- if (flags & ldr_flags[i].flag)
- printf("%s ", ldr_flags[i].desc);
-
- pval = (flags & BFLAG_53X_PFLAG_MASK) >> BFLAG_53X_PFLAG_SHIFT;
- if (pval)
- printf("gpio%i ", pval);
- pval = (flags & BFLAG_53X_PPORT_MASK) >> BFLAG_53X_PPORT_SHIFT;
- if (pval)
- printf("port%c ", 'e' + pval);
-
- if (flags & BFLAG_53X_ZEROFILL)
- count = 0;
- if (flags & BFLAG_53X_FINAL)
- count = 0;
- else
- count += sizeof(addr) + sizeof(count) + sizeof(flags);
-
-#else
-
- const uint8_t *raw8 = base_addr;
- uint32_t bcode, addr, arg, sign, chk;
- int i;
- static const struct ldr_flag ldr_flags[] = {
- { BFLAG_SAFE, "safe" },
- { BFLAG_AUX, "aux" },
- { BFLAG_FILL, "fill" },
- { BFLAG_QUICKBOOT, "quickboot" },
- { BFLAG_CALLBACK, "callback" },
- { BFLAG_INIT, "init" },
- { BFLAG_IGNORE, "ignore" },
- { BFLAG_INDIRECT, "indirect" },
- { BFLAG_FIRST, "first" },
- { BFLAG_FINAL, "final" },
- };
-
- memcpy(&bcode, base_addr, sizeof(bcode));
- memcpy(&addr, base_addr+4, sizeof(addr));
- memcpy(&count, base_addr+8, sizeof(count));
- memcpy(&arg, base_addr+12, sizeof(arg));
-
- printf("%08X %08X %08X %08X ( ", bcode, addr, count, arg);
-
- if (addr % 4)
- printf("!!addralgn!! ");
- if (count % 4)
- printf("!!cntalgn!! ");
-
- sign = (bcode & BFLAG_HDRSIGN_MASK) >> BFLAG_HDRSIGN_SHIFT;
- if (sign != BFLAG_HDRSIGN_MAGIC)
- printf("!!hdrsign!! ");
-
- chk = 0;
- for (i = 0; i < 16; ++i)
- chk ^= raw8[i];
- if (chk)
- printf("!!hdrchk!! ");
-
- printf("dma:%i ", bcode & BFLAG_DMACODE_MASK);
-
- for (i = 0; i < ARRAY_SIZE(ldr_flags); ++i)
- if (bcode & ldr_flags[i].flag)
- printf("%s ", ldr_flags[i].desc);
-
- if (bcode & BFLAG_FILL)
- count = 0;
- if (bcode & BFLAG_FINAL)
- count = 0;
- else
- count += sizeof(bcode) + sizeof(addr) + sizeof(count) + sizeof(arg);
-
-#endif
-
- printf(")\n");
-
- return count;
-}
-
-static int do_ldrinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- const void *addr;
- uint32_t skip;
-
- /* Get the address */
- if (argc < 2)
- addr = (void *)load_addr;
- else
- addr = (void *)simple_strtoul(argv[1], NULL, 16);
-
- /* Walk the LDR */
- addr += ldrinfo_header(addr);
- do {
- skip = ldrinfo_block(addr);
- addr += skip;
- } while (skip);
-
- return 0;
-}
-
-U_BOOT_CMD(
- ldrinfo, 2, 0, do_ldrinfo,
- "validate ldr image in memory",
- "[addr]\n"
-);
+++ /dev/null
-/*
- * cmd_otp.c - interface to Blackfin on-chip One-Time-Programmable memory
- *
- * Copyright (c) 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-/* There are 512 128-bit "pages" (0x000 through 0x1FF).
- * The pages are accessable as 64-bit "halfpages" (an upper and lower half).
- * The pages are not part of the memory map. There is an OTP controller which
- * handles scanning in/out of bits. While access is done through OTP MMRs,
- * the bootrom provides C-callable helper functions to handle the interaction.
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <console.h>
-
-#include <asm/blackfin.h>
-#include <asm/clock.h>
-#include <asm/mach-common/bits/otp.h>
-
-static const char *otp_strerror(uint32_t err)
-{
- switch (err) {
- case 0: return "no error";
- case OTP_WRITE_ERROR: return "OTP fuse write error";
- case OTP_READ_ERROR: return "OTP fuse read error";
- case OTP_ACC_VIO_ERROR: return "invalid OTP address";
- case OTP_DATA_MULT_ERROR: return "multiple bad bits detected";
- case OTP_ECC_MULT_ERROR: return "error in ECC bits";
- case OTP_PREV_WR_ERROR: return "space already written";
- case OTP_DATA_SB_WARN: return "single bad bit in half page";
- case OTP_ECC_SB_WARN: return "single bad bit in ECC";
- default: return "unknown error";
- }
-}
-
-#define lowup(x) ((x) % 2 ? "upper" : "lower")
-
-static int check_voltage(void)
-{
- /* Make sure voltage limits are within datasheet spec */
- uint16_t vr_ctl = bfin_read_VR_CTL();
-
-#ifdef __ADSPBF54x__
- /* 0.9V <= VDDINT <= 1.1V */
- if ((vr_ctl & 0xc) && (vr_ctl & 0xc0) == 0xc0)
- return 1;
-#else
- /* for the parts w/out qualification yet */
- (void)vr_ctl;
-#endif
-
- return 0;
-}
-
-static void set_otp_timing(bool write)
-{
- static uint32_t timing;
- if (!timing) {
- uint32_t tp1, tp2, tp3;
- /* OTP_TP1 = 1000 / sclk_period (in nanoseconds)
- * OTP_TP1 = 1000 / (1 / get_sclk() * 10^9)
- * OTP_TP1 = (1000 * get_sclk()) / 10^9
- * OTP_TP1 = get_sclk() / 10^6
- */
- tp1 = get_sclk() / 1000000;
- /* OTP_TP2 = 400 / (2 * sclk_period)
- * OTP_TP2 = 400 / (2 * 1 / get_sclk() * 10^9)
- * OTP_TP2 = (400 * get_sclk()) / (2 * 10^9)
- * OTP_TP2 = (2 * get_sclk()) / 10^7
- */
- tp2 = (2 * get_sclk() / 10000000) << 8;
- /* OTP_TP3 = magic constant */
- tp3 = (0x1401) << 15;
- timing = tp1 | tp2 | tp3;
- }
-
- bfrom_OtpCommand(OTP_INIT, write ? timing : timing & ~(-1 << 15));
-}
-
-int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- char *cmd;
- uint32_t ret, base_flags;
- bool prompt_user, force_read;
- uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content);
-
- if (argc < 4) {
- usage:
- return CMD_RET_USAGE;
- }
-
- prompt_user = false;
- base_flags = 0;
- cmd = argv[1];
- if (!strcmp(cmd, "read"))
- otp_func = bfrom_OtpRead;
- else if (!strcmp(cmd, "dump")) {
- otp_func = bfrom_OtpRead;
- force_read = true;
- } else if (!strcmp(cmd, "write")) {
- otp_func = bfrom_OtpWrite;
- base_flags = OTP_CHECK_FOR_PREV_WRITE;
- if (!strcmp(argv[2], "--force")) {
- argv++;
- --argc;
- } else
- prompt_user = false;
- } else if (!strcmp(cmd, "lock")) {
- if (argc != 4)
- goto usage;
- otp_func = bfrom_OtpWrite;
- base_flags = OTP_LOCK;
- } else
- goto usage;
-
- uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16);
- uint32_t page = simple_strtoul(argv[3], NULL, 16);
- uint32_t flags;
- size_t i, count;
- ulong half;
-
- if (argc > 4)
- count = simple_strtoul(argv[4], NULL, 16);
- else
- count = 2;
-
- if (argc > 5) {
- half = simple_strtoul(argv[5], NULL, 16);
- if (half != 0 && half != 1) {
- puts("Error: 'half' can only be '0' or '1'\n");
- goto usage;
- }
- } else
- half = 0;
-
- /* "otp lock" has slightly different semantics */
- if (base_flags & OTP_LOCK) {
- count = page;
- page = (uint32_t)addr;
- addr = NULL;
- }
-
- /* do to the nature of OTP, make sure users are sure */
- if (prompt_user) {
- printf(
- "Writing one time programmable memory\n"
- "Make sure your operating voltages and temperature are within spec\n"
- " source address: 0x%p\n"
- " OTP destination: %s page 0x%03X - %s page 0x%03lX\n"
- " number to write: %lu halfpages\n"
- " type \"YES\" (no quotes) to confirm: ",
- addr,
- lowup(half), page,
- lowup(half + count - 1), page + (half + count - 1) / 2,
- half + count
- );
- if (!confirm_yesno()) {
- printf(" Aborting\n");
- return 1;
- }
- }
-
- printf("OTP memory %s: addr 0x%p page 0x%03X count %zu ... ",
- cmd, addr, page, count);
-
- set_otp_timing(otp_func == bfrom_OtpWrite);
- if (otp_func == bfrom_OtpWrite && check_voltage()) {
- puts("ERROR: VDDINT voltage is out of spec for writing\n");
- return -1;
- }
-
- /* Do the actual reading/writing stuff */
- ret = 0;
- for (i = half; i < count + half; ++i) {
- flags = base_flags | (i % 2 ? OTP_UPPER_HALF : OTP_LOWER_HALF);
- try_again:
- ret = otp_func(page, flags, addr);
- if (ret & OTP_MASTER_ERROR) {
- if (force_read) {
- if (flags & OTP_NO_ECC)
- break;
- else
- flags |= OTP_NO_ECC;
- puts("E");
- goto try_again;
- } else
- break;
- } else if (ret)
- puts("W");
- else
- puts(".");
- if (!(base_flags & OTP_LOCK)) {
- ++addr;
- if (i % 2)
- ++page;
- } else
- ++page;
- }
- if (ret & 0x1)
- printf("\nERROR at page 0x%03X (%s-halfpage): 0x%03X: %s\n",
- page, lowup(i), ret, otp_strerror(ret));
- else
- puts(" done\n");
-
- /* Make sure we disable writing */
- set_otp_timing(false);
- bfrom_OtpCommand(OTP_CLOSE, 0);
-
- return ret;
-}
-
-U_BOOT_CMD(
- otp, 7, 0, do_otp,
- "One-Time-Programmable sub-system",
- "read <addr> <page> [count] [half]\n"
- " - read 'count' half-pages starting at 'page' (offset 'half') to 'addr'\n"
- "otp dump <addr> <page> [count] [half]\n"
- " - like 'otp read', but skip read errors\n"
- "otp write [--force] <addr> <page> [count] [half]\n"
- " - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n"
- "otp lock <page> <count>\n"
- " - lock 'count' pages starting at 'page'"
-);
+++ /dev/null
-/*
- * cmd_softswitch.c - set the softswitch for bf60x
- *
- * Copyright (c) 2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/blackfin.h>
-#include <asm/soft_switch.h>
-
-int do_softswitch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int switchaddr, value, pin, port;
-
- if (argc != 5)
- return CMD_RET_USAGE;
-
- if (strcmp(argv[2], "GPA") == 0)
- port = IO_PORT_A;
- else if (strcmp(argv[2], "GPB") == 0)
- port = IO_PORT_B;
- else
- return CMD_RET_USAGE;
-
- switchaddr = simple_strtoul(argv[1], NULL, 16);
- pin = simple_strtoul(argv[3], NULL, 16);
- value = simple_strtoul(argv[4], NULL, 16);
-
- config_switch_bit(switchaddr, port, (1 << pin), IO_PORT_OUTPUT, value);
-
- return 0;
-}
-
-U_BOOT_CMD(
- softswitch_output, 5, 1, do_softswitch,
- "switchaddr GPA/GPB pin_offset value",
- ""
-);
+++ /dev/null
-/*
- * U-Boot - spibootldr.c
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <command.h>
-
-#include <asm/blackfin.h>
-#include <asm/mach-common/bits/bootrom.h>
-
-int do_spibootldr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- s32 addr;
-
- /* Get the address */
- if (argc < 2)
- addr = 0;
- else
- addr = simple_strtoul(argv[1], NULL, 16);
-
- printf("## Booting ldr image at SPI offset 0x%x ...\n", addr);
-
- return bfrom_SpiBoot(addr, BFLAG_PERIPHERAL | 4, 0, NULL);
-}
-
-U_BOOT_CMD(
- spibootldr, 2, 0, do_spibootldr,
- "boot ldr image from spi",
- "[offset]\n"
- " - boot ldr image stored at offset into spi\n");
git.openpandora.org / pandora-u-boot.git / commitdiff