+++ /dev/null
-/*
- * Faraday FTIDE020 ATA Controller (AHB)
- *
- * (C) Copyright 2011 Andes Technology
- * Greentime Hu <greentime@andestech.com>
- * Macpaul Lin <macpaul@andestech.com>
- * Kuo-Wei Chou <kwchou@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-/* ftide020.c - ide support functions for the FTIDE020_S controller */
-
-#include <config.h>
-#include <common.h>
-#include <ata.h>
-#include <ide.h>
-#include <asm/io.h>
-#include <api_public.h>
-
-#include "ftide020.h"
-
-/* base address */
-#define FTIDE_BASE CONFIG_SYS_ATA_BASE_ADDR
-
-/*
- * data address - The CMD and DATA use the same FIFO in FTIDE020_S
- * FTIDE_DATA = CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_DATA_OFFSET
- * = &ftide020->rw_fifo
- */
-#define FTIDE_DATA (&ftide020->rw_fifo)
-
-/* command and data I/O macros */
-/* 0x0 - DATA FIFO */
-#define WRITE_DATA(x) outl((x), &ftide020->rw_fifo) /* 0x00 */
-#define READ_DATA() inl(&ftide020->rw_fifo) /* 0x00 */
-/* 0x04 - R: Status Reg, W: CMD_FIFO */
-#define WRITE_CMD(x) outl((x), &ftide020->cmd_fifo) /* 0x04 */
-#define READ_STATUS() inl(&ftide020->cmd_fifo) /* 0x04 */
-
-void ftide_set_device(int cx8, int dev)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
- WRITE_CMD(SET_DEV_CMD | IDE_SET_CX8(cx8) | dev);
-}
-
-unsigned char ide_read_register(int dev, unsigned int port)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
- ftide_set_device(0, dev);
- WRITE_CMD(READ_REG_CMD | IDE_REG_CS_READ(CONFIG_IDE_REG_CS) |
- IDE_REG_DA_WRITE(port));
-
- return READ_DATA() & 0xff;
-}
-
-void ide_write_register(int dev, unsigned int port, unsigned char val)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
- ftide_set_device(0, dev);
- WRITE_CMD(WRITE_REG_CMD | IDE_REG_CS_WRITE(CONFIG_IDE_REG_CS) |
- IDE_REG_DA_WRITE(port) | val);
-}
-
-void ide_write_data(int dev, const ulong *sect_buf, int words)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
- ftide_set_device(0, dev);
- WRITE_CMD(WRITE_DATA_CMD | ((words << 2) - 1));
-
- /* block write */
- outsl(FTIDE_DATA, sect_buf, words);
-}
-
-void ide_read_data(int dev, ulong *sect_buf, int words)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
- ftide_set_device(0, dev);
- WRITE_CMD(READ_DATA_CMD | ((words << 2) - 1));
-
- /* block read */
- insl(FTIDE_DATA, sect_buf, words);
-}
-
-void ftide_dfifo_ready(ulong *time)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
-
- while (!(READ_STATUS() & STATUS_RFE)) {
- if (*time-- == 0)
- break;
-
- udelay(100);
- }
-}
-
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
-
-/* Reset_IDE_controller */
-static void reset_ide_controller(void)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
- unsigned int val;
-
- val = inl(&ftide020->cr);
-
- val |= CONTROL_RST;
- outl(val, &ftide020->cr);
-
- /* wait until reset OK, this is poor HW design */
- mdelay(50);
- val &= ~(CONTROL_RST);
- outl(val, &ftide020->cr);
-
- mdelay(50);
- val |= CONTROL_SRST;
- outl(val, &ftide020->cr);
-
- /* wait until reset OK, this is poor HW design */
- mdelay(50);
- val &= ~(CONTROL_SRST);
- outl(val, &ftide020->cr);
-
- /* IORDY enable for PIO, for 2 device */
- val |= (CONTROL_IRE0 | CONTROL_IRE1);
- outl(val, &ftide020->cr);
-}
-
-/* IDE clock frequence */
-uint ftide_clock_freq(void)
-{
- /*
- * todo: To aquire dynamic system frequency is dependend on the power
- * management unit which the ftide020 is connected to. In current,
- * there are only few PMU supports in u-boot.
- * So this function is wait for future enhancement.
- */
- return 100;
-}
-
-/* Calculate Timing Registers */
-static unsigned int timing_cal(u16 t0, u16 t1, u16 t2, u16 t4)
-{
- unsigned int val, ahb_ns = 8;
- u8 TEOC, T1, T2, T4;
-
- T1 = (u8) (t1 / ahb_ns);
- if ((T1 * ahb_ns) == t1)
- T1--;
-
- T2 = (u8) (t2 / ahb_ns);
- if ((T2 * ahb_ns) == t2)
- T2--;
-
- T4 = (u8) (t4 / ahb_ns);
- if ((T4 * ahb_ns) == t4)
- T4--;
-
- TEOC = (u8) (t0 / ahb_ns);
- if ((TEOC * ahb_ns) == t0)
- TEOC--;
-
- TEOC = ((TEOC > (T1 + T2 + T4)) ? (TEOC - (T1 + T2 + T4)) : 0);
-
- /*
- * Here the fields in data timing registers in PIO mode
- * is accessed the same way as command timing registers.
- */
- val = DT_REG_PIO_T1(T1) |
- DT_REG_PIO_T2(T2) |
- DT_REG_PIO_T4(T4) |
- DT_REG_PIO_TEOC(TEOC);
-
- return val;
-}
-
-/* Set Timing Register */
-static unsigned int set_mode_timing(u8 dev, u8 id, u8 mode)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
- u16 t0, t1, t2, t4;
- u8 tcyc, tcvs, tmli, tenv, tack, trp;
- unsigned int val, sysclk = 8;
-
- if (id >= TATOL_TIMING)
- return 0;
-
- sysclk = ftide_clock_freq();
- switch (id) {
- case CMD_TIMING:
- if (mode < REG_MODE) {
- t0 = REG_ACCESS_TIMING[REG_T0][mode];
- t1 = REG_ACCESS_TIMING[REG_T1][mode];
- t2 = REG_ACCESS_TIMING[REG_T2][mode];
- t4 = REG_ACCESS_TIMING[REG_T4][mode];
-
- val = timing_cal(t0, t1, t2, t4);
- outl(val, (dev ? &ftide020->ctrd1 : &ftide020->ctrd0));
- return 1;
- } else
- return 0;
- case PIO_TIMING:
- if (mode < PIO_MODE) {
- t0 = PIO_ACCESS_TIMING[PIO_T0][mode];
- t1 = PIO_ACCESS_TIMING[PIO_T1][mode];
- t2 = PIO_ACCESS_TIMING[PIO_T2][mode];
- t4 = PIO_ACCESS_TIMING[PIO_T4][mode];
-
- val = timing_cal(t0, t1, t2, t4);
-
- outl(val, (dev ? &ftide020->dtrd1 : &ftide020->dtrd0));
- return 1;
- } else
- return 0;
- case DMA_TIMING:
- if (mode < UDMA_MODE) {
- /*
- * 0.999 is ceiling
- * for tcyc, tcvs, tmli, tenv, trp, tack
- */
- tcyc = (u8) (((UDMA_ACCESS_TIMING[UDMA_TCYC][mode] \
- * sysclk) + 9990) / 10000);
- tcvs = (u8) (((UDMA_ACCESS_TIMING[UDMA_TCVS][mode] \
- * sysclk) + 9990) / 10000);
- tmli = (u8) (((UDMA_ACCESS_TIMING[UDMA_TMLI][mode] \
- * sysclk) + 9990) / 10000);
- tenv = (u8) (((UDMA_ACCESS_TIMING[UDMA_TENV][mode] \
- * sysclk) + 9990) / 10000);
- trp = (u8) (((UDMA_ACCESS_TIMING[UDMA_TRP][mode] \
- * sysclk) + 9990) / 10000);
- tack = (u8) (((UDMA_ACCESS_TIMING[UDMA_TACK][mode] \
- * sysclk) + 9990) / 10000);
-
- val = DT_REG_UDMA_TENV((tenv > 0) ? (tenv - 1) : 0) |
- DT_REG_UDMA_TMLI((tmli > 0) ? (tmli - 1) : 0) |
- DT_REG_UDMA_TCYC((tcyc > 0) ? (tcyc - 1) : 0) |
- DT_REG_UDMA_TACK((tack > 0) ? (tack - 1) : 0) |
- DT_REG_UDMA_TCVS((tcvs > 0) ? (tcvs - 1) : 0) |
- DT_REG_UDMA_TRP((trp > 0) ? (trp - 1) : 0);
-
- outl(val, (dev ? &ftide020->dtrd1 : &ftide020->dtrd0));
- return 1;
- } else
- return 0;
- default:
- return 0;
- }
-}
-
-static void ftide_read_hwrev(void)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
- unsigned int rev;
-
- rev = inl(&ftide020->revision);
-}
-
-static int ftide_controller_probe(void)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
- unsigned int bak;
-
- bak = inl(&ftide020->ctrd1);
-
- /* probing by using shorter setup time */
- outl(CONFIG_CTRD1_PROBE_T1, &ftide020->ctrd1);
- if ((inl(&ftide020->ctrd1) & 0xff) != CONFIG_CTRD1_PROBE_T1) {
- outl(bak, &ftide020->ctrd1);
- return 0;
- }
-
- /* probing by using longer setup time */
- outl(CONFIG_CTRD1_PROBE_T2, &ftide020->ctrd1);
- if ((inl(&ftide020->ctrd1) & 0xff) != CONFIG_CTRD1_PROBE_T2) {
- outl(bak, &ftide020->ctrd1);
- return 0;
- }
-
- outl(bak, &ftide020->ctrd1);
-
- return 1;
-}
-
-/* ide_preinit() was migrated from linux driver ide_probe_for_ftide() */
-int ide_preinit(void)
-{
- static struct ftide020_s *ftide020 = (struct ftide020_s *) FTIDE_BASE;
- int status;
- unsigned int val;
- int i;
-
- status = 1;
- for (i = 0; i < CONFIG_SYS_IDE_MAXBUS; i++)
- ide_bus_offset[i] = -ATA_STATUS;
-
- /* auto-detect IDE controller */
- if (ftide_controller_probe()) {
- printf("FTIDE020_S\n");
- } else {
- printf("FTIDE020_S ATA controller not found.\n");
- return API_ENODEV;
- }
-
- /* check HW IP revision */
- ftide_read_hwrev();
-
- /* set FIFO threshold */
- outl(((WRITE_FIFO - RX_THRESH) << 16) | RX_THRESH, &ftide020->dmatirr);
-
- /* set Device_0 PIO_4 timing */
- set_mode_timing(0, CMD_TIMING, REG_MODE4);
- set_mode_timing(0, PIO_TIMING, PIO_MODE4);
-
- /* set Device_1 PIO_4 timing */
- set_mode_timing(1, CMD_TIMING, REG_MODE4);
- set_mode_timing(1, PIO_TIMING, PIO_MODE4);
-
- /* from E-bios */
- /* little endian */
- outl(0x0, &ftide020->cr);
- mdelay(10);
-
- outl(0x0fff0fff, &ftide020->ahbtr);
- mdelay(10);
-
- /* Enable controller Interrupt */
- val = inl(&ftide020->cr);
-
- /* Enable: IDE IRQ, IDE Terminate ERROR IRQ, AHB Timeout error IRQ */
- val |= (CONTROL_IIE | CONTROL_TERIE | CONTROL_AERIE);
- outl(val, &ftide020->cr);
-
- status = 0;
-
- return status;
-}
-
-void ide_set_reset(int flag)
-{
- debug("ide_set_reset()\n");
- reset_ide_controller();
- return;
-}
+++ /dev/null
-/*
- * Faraday FTIDE020_s ATA Controller (AHB)
- *
- * (C) Copyright 2011 Andes Technology
- * Greentime Hu <greentime@andestech.com>
- * Macpaul Lin <macpaul@andestech.com>
- * Kuo-Wei Chou <kwchou@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __FTIDE020_H
-#define __FTIDE020_H
-
-/* ftide020.h - ide support functions for the FTIDE020_S controller */
-
-/* ATA controller register offset */
-struct ftide020_s {
- unsigned int rw_fifo; /* 0x00 - READ/WRITE FIFO */
- unsigned int cmd_fifo; /* 0x04 - R: Status Reg, W: CMD_FIFO */
- unsigned int cr; /* 0x08 - Control Reg */
- unsigned int dmatirr; /* 0x0c - DMA Threshold/Interrupt Reg */
- unsigned int ctrd0; /* 0x10 - Command Timing Reg Device 0 */
- unsigned int dtrd0; /* 0x14 - Data Timing Reg Device 0 */
- unsigned int ctrd1; /* 0x18 - Command Timing Reg Device 1 */
- unsigned int dtrd1; /* 0x1c - Data Timing Reg Device 1 */
- unsigned int ahbtr; /* 0x20 - AHB Timeout Reg */
- unsigned int RESVD0; /* 0x24 */
- unsigned int RESVD1; /* 0x28 */
- unsigned int RESVD2; /* 0x2c */
- unsigned int f_cfifo; /* 0x30 - Feature Info of CMD_FIFO */
- unsigned int f_wfifo; /* 0x34 - Feature Info of WRITE_FIFO */
- unsigned int f_rfifo; /* 0x3c - Feature Info of READ_FIFO */
- unsigned int revision; /* 0x38 - Revision No. of FTIDE020_S */
-};
-
-/* reference parameters */
-#define CONFIG_IDE_REG_CS 0x2 /* ref: ATA spec chaper 10, table 42 */
-#define CONFIG_CTRD1_PROBE_T1 0x2
-#define CONFIG_CTRD1_PROBE_T2 0x5
-
-/* status register - 0x04 */
-#define STATUS_CSEL (1 << 0) /* CSEL */
-#define STATUS_CS(x) (((x) >> 1) & 0x3) /* CS#[1:0] */
-#define STATUS_DMACK (1 << 3) /* DMACK# */
-#define STATUS_DMARQ (1 << 4) /* DMA req */
-#define STATUS_INTRQ (1 << 5) /* INT req */
-#define STATUS_DIOR (1 << 6) /* DIOR */
-#define STATUS_IORDY (1 << 7) /* I/O ready */
-#define STATUS_DIOW (1 << 8) /* DIOW# */
-#define STATUS_PDIAG (1 << 9) /* PDIAG */
-#define STATUS_DASP (1 << 10) /* DASP# */
-#define STATUS_DEV (1 << 11) /* selected device */
-#define STATUS_PIO (1 << 12) /* PIO in progress */
-#define STATUS_DMA (1 << 13) /* DMA in progress */
-#define STATUS_WFE (1 << 14) /* write fifo full */
-#define STATUS_RFE (1 << 15) /* read fifo empty */
-#define STATUS_COUNTER(x) (((x) >> 16) & 0x3fff) /* data tx counter */
-#define STATUS_ERR (1 << 30) /* trasfer terminated */
-#define STATUS_AER (1 << 31) /* AHB timeout indicate */
-
-/* Control register - 0x08 */
-#define CONTROL_TYPE_PIO 0x0
-#define CONTROL_TYPE_UDMA 0x1
-
-/* Device 0 */
-#define CONTROL_TYP0(x) (((x) & 0x7) << 0)
-#define CONTROL_IRE0 (1 << 3) /* enable IORDY for PIO */
-#define CONTROL_RESVD_DW0 (1 << 4) /* Reserved - DW0 ? */
-#define CONTROL_E0 (1 << 5) /* E0: 1: Big Endian */
-#define CONTROL_RESVD_WP0 (1 << 6) /* Reserved - WP0 ? */
-#define CONTROL_RESVD_SE0 (1 << 7) /* Reserved - SE0 ? */
-#define CONTROL_RESVD_ECC0 (1 << 8) /* Reserved - ECC0 ? */
-
-#define CONTROL_RAEIE (1 << 9) /* IRQ - read fifo almost full */
-#define CONTROL_RNEIE (1 << 10) /* IRQ - read fifo not empty */
-#define CONTROL_WAFIE (1 << 11) /* IRQ - write fifo almost empty */
-#define CONTROL_WNFIE (1 << 12) /* IRQ - write fifo not full */
-#define CONTROL_RESVD_FIRQ (1 << 13) /* RESERVED - FIRQ ? */
-#define CONTROL_AERIE (1 << 14) /* IRQ - AHB timeout error */
-#define CONTROL_IIE (1 << 15) /* IDE IRQ enable */
-
-/* Device 1 */
-#define CONTROL_TYP1(x) (((x) & 0x7) << 16)
-#define CONTROL_IRE1 (1 << 19) /* enable IORDY for PIO */
-#define CONTROL_RESVD_DW1 (1 << 20) /* Reserved - DW1 ? */
-#define CONTROL_E1 (1 << 21) /* E1: 1: Big Endian */
-#define CONTROL_RESVD_WP1 (1 << 22) /* Reserved - WP1 ? */
-#define CONTROL_RESVD_SE1 (1 << 23) /* Reserved - SE1 ? */
-#define CONTROL_RESVD_ECC1 (1 << 24) /* Reserved - ECC1 ? */
-
-#define CONTROL_DRE (1 << 25) /* DMA receive enable */
-#define CONTROL_DTE (1 << 26) /* DMA transmit enable */
-#define CONTRIL_RESVD (1 << 27)
-#define CONTROL_TERIE (1 << 28) /* transfer terminate error IRQ */
-#define CONTROL_T (1 << 29) /* terminate current operation */
-#define CONTROL_SRST (1 << 30) /* IDE soft reset */
-#define CONTROL_RST (1 << 31) /* IDE hardware reset */
-
-/* IRQ register - 0x0c */
-#define IRQ_RXTHRESH(x) (((x) & 0x3ff) << 0) /* Read FIFO threshold */
-#define IRQ_RFAEIRQ (1 << 10) /* Read FIFO almost full intr req */
-#define IRQ_RFNEIRQ (1 << 11) /* Read FIFO not empty intr req */
-#define IRQ_WFAFIRQ (1 << 12) /* Write FIFO almost empty int req */
-#define IRQ_WFNFIRQ (1 << 13) /* Write FIFO not full intr req */
-#define IRQ_RESVD_FIRQ (1 << 14) /* Reserved - FIRQ ? */
-#define IRQ_IIRQ (1 << 15) /* IDE device interrupt request */
-#define IRQ_TXTHRESH(x) (((x) & 0x3ff) << 16) /* Write FIFO thershold */
-#define IRQ_TERMERR (1 << 28) /* Transfer termination indication */
-#define IRQ_AHBERR (1 << 29) /* AHB Timeout indication */
-
-/* Command Timing Register 0-1: ctrd (0x10, 0x18) */
-#define CT_REG_T1(x) (((x) & 0xff) << 0) /* setup time of addressed */
-#define CT_REG_T2(x) (((x) & 0xff) << 8) /* pluse width of DIOR/DIOW */
-#define CT_REG_T4(x) (((x) & 0xff) << 16) /* data hold time */
-#define CT_REG_TEOC(x) (((x) & 0xff) << 24) /* time to the end of a cycle */
-
-/* Data Timing Register 0-1: dtrd (0x14, 0x1c) */
-/*
- * PIO mode:
- * b(0:7) DT_REG_PIO_T1: the setup time of addressed
- * b(8:15) DT_REG_PIO_T2: the pluse width of DIOR/DIOW
- * b(16:23) DT_REG_PIO_T4: data hold time
- * b(24:31) DT_REG_PIO_TEOC: the time to the end of a cycle
- */
-#define DT_REG_PIO_T1(x) (((x) & 0xff) << 0)
-#define DT_REG_PIO_T2(x) (((x) & 0xff) << 8)
-#define DT_REG_PIO_T4(x) (((x) & 0xff) << 16)
-#define DT_REG_PIO_TEOC(x) (((x) & 0xff) << 24)
-
-/*
- * UDMA mode:
- * b(0:3) DT_REG_UDMA_TENV: the envelope time
- * b(4:7) DT_REG_UDMA_TMLI: interlock time
- * b(8:15) DT_REG_UDMA_TCYC: cycle time - data time
- * b(16:19) DT_REG_UDMA_TACK: setup and hold time of DMACK
- * b(23:30) DT_REG_UDMA_TCVS: setup time of CRC
- * b(24:31) DT_REG_UDMA_TRP: time to ready to pause
- */
-#define DT_REG_UDMA_TENV(x) (((x) & 0xf) << 0)
-#define DT_REG_UDMA_TMLI(x) (((x) & 0xf) << 4)
-#define DT_REG_UDMA_TCYC(x) (((x) & 0xff) << 8)
-#define DT_REG_UDMA_TACK(x) (((x) & 0xf) << 16)
-#define DT_REG_UDMA_TCVS(x) (((x) & 0xf) << 20)
-#define DT_REG_UDMA_TRP(x) (((x) & 0xff) << 24)
-
-/* ftide020_s command formats */
-/* read: IDE Register (CF1) */
-#define IDE_REG_OPCODE_READ (1 << 13) /* 0x2000 */
-#define IDE_REG_CS_READ(x) (((x) & 0x3) << 11)
-#define IDE_REG_DA_READ(x) (((x) & 0x7) << 8)
-#define IDE_REG_CMD_READ(x) 0x0 /* fixed value */
-
-/* write: IDE Register (CF2) */
-#define IDE_REG_OPCODE_WRITE (0x5 << 13) /* 0xA000 */
-#define IDE_REG_CS_WRITE(x) (((x) & 0x3) << 11)
-#define IDE_REG_DA_WRITE(x) (((x) & 0x7) << 8)
-/* b(0:7) IDE_REG_CMD_WRITE(x): Actual ATA command or data */
-#define IDE_REG_CMD_WRITE(x) (((x) & 0xff) << 0)
-
-/* read/write data: PIO/UDMA (CF3) */
-#define IDE_DATA_WRITE (1 << 15) /* read: 0, write: 1 */
-#define IDE_DATA_OPCODE (0x2 << 13) /* device data access opcode */
-/* b(0:12) IDE_DATA_COUNTER(x): Number of transfers minus 1 */
-#define IDE_DATA_COUNTER(x) (((x) & 0x1fff) << 0)
-
-/* set device: (CF4) */
-#define IDE_SET_OPCODE (0x2740 << 2) /* [15:2], 0x9d00 */
-/* CF3 counter value: 0: Tx in bytes, 1: in blocks (each block is 8 bytes) */
-#define IDE_SET_CX8(x) (((x) & 0x1) << 1)
-#define IDE_SET_DEV(x) (((x) & 0x1) << 0) /* 0: Master, 1: Slave */
-
-/*
- * IDE command bit definition
- * This section is designed for minor hardware revision compatibility.
- */
-#define READ_REG_CMD IDE_REG_OPCODE_READ /* 0x2000 */
-#define WRITE_REG_CMD IDE_REG_OPCODE_WRITE /* 0xA000 */
-#define READ_DATA_CMD IDE_DATA_OPCODE /* 0x4000 */
-#define WRITE_DATA_CMD (IDE_DATA_OPCODE | IDE_DATA_WRITE) /* 0xC000 */
-#define SET_DEV_CMD IDE_SET_OPCODE /* 0x9D00 */
-
-#define TATOL_TIMING 3
-#define CMD_TIMING 0
-#define PIO_TIMING 1
-#define DMA_TIMING 2
-
-/* Timing Parameters */
-/* Register Access Timing Parameters */
-#define REG_PARAMETER 4
-#define REG_T0 0
-#define REG_T1 1
-#define REG_T2 2
-#define REG_T4 3
-
-#define REG_MODE 5
-#define REG_MODE0 0
-#define REG_MODE1 1
-#define REG_MODE2 2
-#define REG_MODE3 3
-#define REG_MODE4 4
-
-/* PIO Access Timing Parameters */
-#define PIO_PARAMETER 4
-#define PIO_T0 0
-#define PIO_T1 1
-#define PIO_T2 2
-#define PIO_T4 3
-
-#define PIO_MODE 5
-#define PIO_MODE0 0
-#define PIO_MODE1 1
-#define PIO_MODE2 2
-#define PIO_MODE3 3
-#define PIO_MODE4 4
-
-/* UDMA Access Timing Parameters */
-#define UDMA_PARAMETER 6
-#define UDMA_TCYC 0
-#define UDMA_TCVS 1
-#define UDMA_TMLI 2
-#define UDMA_TENV 3
-#define UDMA_TRP 4
-#define UDMA_TACK 5
-
-#define UDMA_MODE 7
-#define UDMA_MODE0 0
-#define UDMA_MODE1 1
-#define UDMA_MODE2 2
-#define UDMA_MODE3 3
-#define UDMA_MODE4 4
-#define UDMA_MODE5 5
-#define UDMA_MODE6 6
-
-/*
- * RX_THRESH:
- * hardware limitation: max = 8, should support 1,4,8,16,32,64,128,256
- */
-#define RX_THRESH 8
-#define WRITE_FIFO 32 /* Hardwired value */
-
-/* Time Table */
-unsigned int REG_ACCESS_TIMING[REG_PARAMETER][REG_MODE] = {
- {600, 383, 330, 180, 120},
- {70, 50, 30, 30, 25},
- {290, 290, 290, 80, 70},
- {30, 20, 15, 10, 10},
-};
-
-unsigned int PIO_ACCESS_TIMING[PIO_PARAMETER][PIO_MODE] = {
- {600, 383, 240, 180, 120},
- {70, 50, 30, 30, 25},
- {165, 125, 100, 80, 70},
- {30, 20, 15, 10, 10},
-};
-
-unsigned int UDMA_ACCESS_TIMING[UDMA_PARAMETER][UDMA_MODE] = {
- {1120, 730, 540, 390, 250, 168, 130}, /* 10X */
- {700, 480, 310, 200, 67, 100, 100}, /* 10X */
- {200, 200, 200, 200, 200, 200, 200}, /* 10X */
- {200, 200, 200, 200, 200, 200, 200}, /* 10X */
- {1600, 1250, 1000, 1000, 1000, 850, 850}, /* 10X */
- {200, 200, 200, 200, 200, 200, 200}, /* 10X */
-};
-
-#endif /* __FTIDE020_H */
git.openpandora.org / pandora-u-boot.git / commitdiff