imx6, aristainetos2c: add da9063 pmic setup

On the aristainetos2c boards the PMIC needs to be initialized,
because the Ethernet PHY uses a different regulator that is not
setup per hardware default. This does not influence the other
versions as this regulator isn't used there at all.

Signed-off-by: Heiko Schocher <hs@denx.de>

diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c
index 3541717..7067103 100644 (file)
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -30,6 +30,9 @@
 #include <miiphy.h>
 #include <lcd.h>
 #include <led.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+#include <power/da9063_pmic.h>
 #include <splash.h>
 #include <video_fb.h>
 
@@ -438,6 +441,56 @@ static void aristainetos_bootmode_settings(void)
        }
 }
 
+#if defined(CONFIG_DM_PMIC_DA9063)
+/*
+ * On the aristainetos2c boards the PMIC needs to be initialized,
+ * because the Ethernet PHY uses a different regulator that is not
+ * setup per hardware default. This does not influence the other versions
+ * as this regulator isn't used there at all.
+ *
+ * Unfortunately we have not yet a interface to setup all
+ * values we need.
+ */
+static int setup_pmic_voltages(void)
+{
+       struct udevice *dev;
+       int off;
+       int ret;
+
+       off = fdt_path_offset(gd->fdt_blob, "pmic0");
+       if (off < 0) {
+               printf("%s: No pmic path offset\n", __func__);
+               return off;
+       }
+
+       ret = uclass_get_device_by_of_offset(UCLASS_PMIC, off, &dev);
+       if (ret) {
+               printf("%s: Could not find PMIC\n", __func__);
+               return ret;
+       }
+
+       pmic_reg_write(dev, DA9063_REG_PAGE_CON, 0x01);
+       pmic_reg_write(dev, DA9063_REG_BPRO_CFG, 0xc1);
+       ret = pmic_reg_read(dev, DA9063_REG_BUCK_ILIM_B);
+       if (ret < 0) {
+               printf("%s: error %d get register\n", __func__, ret);
+               return ret;
+       }
+       ret &= 0xf0;
+       ret |= 0x09;
+       pmic_reg_write(dev, DA9063_REG_BUCK_ILIM_B, ret);
+       pmic_reg_write(dev, DA9063_REG_VBPRO_A, 0x43);
+       pmic_reg_write(dev, DA9063_REG_VBPRO_B, 0xc3);
+
+       return 0;
+}
+#else
+static int setup_pmic_voltages(void)
+{
+       return 0;
+}
+#endif
+
 int board_late_init(void)
 {
        int x, y;
@@ -457,6 +510,9 @@ int board_late_init(void)
        else
                env_set("board_type", ARI_BT_7);
 
+       if (setup_pmic_voltages())
+               printf("Error setup PMIC\n");
+
        return 0;
 }
 

diff --git a/configs/aristainetos2c_defconfig b/configs/aristainetos2c_defconfig
index c6d9225..8611915 100644 (file)
--- a/configs/aristainetos2c_defconfig
+++ b/configs/aristainetos2c_defconfig
@@ -87,7 +87,10 @@ CONFIG_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_DM_PMIC_DA9063=y
 CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_DA9063=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_PWM=y
 CONFIG_PWM_IMX=y