mmc: omap: don't set wrong voltage select for mmc2

[pandora-u-boot.git] / doc / README.usb

diff --git a/doc/README.usb b/doc/README.usb
index c4df9cd..b4c3ef5 100644 (file)
--- a/doc/README.usb
+++ b/doc/README.usb
@@ -63,7 +63,7 @@ Common USB Commands:
 Storage USB Commands:
 - usb scan:        scans the USB for storage devices.The USB must be
                    running for this command (usb start)
-- usb device [dev]: show or set current USB staorage device
+- usb device [dev]: show or set current USB storage device
 - usb part [dev]:   print partition table of one or all USB storage
                    devices
 - usb read addr blk# cnt:
@@ -169,7 +169,7 @@ All of these can be obtained from the bootp server if not set.
 
 #define CONFIG_IPADDR          10.0.0.2  (replace with your value)
 #define CONFIG_SERVERIP                10.0.0.1  (replace with your value)
-#define CONFIG_BOOTFILE                uImage
+#define CONFIG_BOOTFILE                "uImage"
 
 
 The 'usb start' command should identify the adapter something like this: