drivers/video/matrox/matroxfb_maven.c: fix unsigned return type

The function has an unsigned return type, but returns a negative constant
to indicate an error condition.  The result of calling the function is
only tested by comparison to 0, and thus unsigned is not needed and can be
dropped from the return type.

A sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@exists@
identifier f;
constant C;
@@

 unsigned f(...)
 { <+...
*  return -C;
 ...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

savagefb: fix DDC for Savage 4

I tested savagefb on 3 different Savage 4 cards:
Diamond Stealth III S520
Number Nine SR9
Datapath Horizon 2S (two savage chips on a PCI card)

it worked except the DDC which did not work on any of them.

Looking at the BIOS code, it does not use MMIO register 0xff20 but CRT
register 0xa0 or 0xb1 - depending on the chip revision and something in
register 0xa6.  With this patch, DDC works fine on all 3 cards (even on
the second head of Horizon 2S - although it does not display anything as
it's misconfigured because of missing BIOS).

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/matrox/matroxfb_DAC1064.c: remove undead ifdef CONFIG_FB_MATROX_G

The CONFIG_FB_MATROX_G ifdef isn't necessary at this point, because it is
checked in an outer ifdef level already and has no effect here.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

langwell_gpio: add support for whitney point

In this case the logic is very similar but the IRQs are not exposed and
the device is not picked up via PCI

Based on a separate internal whitney point driver by Yin Kangkai.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Yin Kangkai <kangkai.yin@intel.com>
Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/gpio/langwell_gpio.c: remove semicolons after function definitions

Deweird this driver.

Cc: Alek Du <alek.du@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: add Topcliff PCH GPIO driver

Topcliff PCH is the platform controller hub that is going to be used in
Intel's upcoming general embedded platform.  All IO peripherals in
Topcliff PCH are actually devices sitting on AMBA bus.  Topcliff PCH has
GPIO I/F.  Using this I/F, it is able to access system devices connected
to GPIO.

[akpm@linux-foundation.org: ese DEFINE_PCI_DEVICE_TABLE (per Joe Perches)]
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Tomoya MORINAGA <morinaga526@dsn.okisemi.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: adp5588-gpio: add i2c forward declaration

Some ADP5588 functions take a pointer to an i2c_client, but if the i2c
header doesn't happen to be included first, we hit the standard "struct
declared inside parameter list" warnings from gcc.  So add a simple
forward decl of the i2c_client struct.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: adp5588-gpio: gpio_start must be signed

Common code interprets this as a signed value (a negative value is used to
request dynamic ID allocation), so make sure the platform data has proper
types to support that.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: adp5588-gpio: support interrupt controller

Implement irq_chip functionality on ADP5588/5587 GPIO expanders.  Only
level sensitive interrupts are supported.  Interrupts provided by this
irq_chip must be requested using request_threaded_irq().

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: add support for 74x164 serial-in/parallel-out 8-bit shift register

Add support for generic 74x164 serial-in/parallel-out 8-bits shift
register.  This driver can be used as a GPIO output expander.

[akpm@linux-foundation.org: remove unused local `refresh']
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
Signed-off-by: Juhos Gabor <juhosg@openwrt.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: timbgpio: use a copy of the IER register to avoid it being trashed

Some versions of the hardware can trash the IER register if simultaneous
interrupts occur.  This patch works around it by using a local copy of the
register and restoring it after every interrupt.

Signed-off-by: Tomas Hallenberg <tomas.hallenberg@pelagicore.com>
Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpiolib: fix HAVE_GPIO_LIB leftovers in asm-generic/gpio.h

commit 7444a72effa632fcd8edc566f88 ("gpiolib: allow user-selection")
removed HAVE_GPIO_LIB Kconfig symbol, but the header file still uses the
name [to confuse readers wrt #ifdef/#else/#endif location].

The real Kconfig symbol nowadays is CONFIG_GPIOLIB.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: add driver for basic memory-mapped GPIO controllers

The basic GPIO controllers may be found in various on-board FPGA and ASIC
solutions that are used to control board's switches, LEDs, chip-selects,
Ethernet/USB PHY power, etc.

These controllers may not provide any means of pin setup
(in/out/open drain).

The driver supports:
- 8/16/32/64 bits registers;
- GPIO controllers with clear/set registers;
- GPIO controllers with a single "data" register;
- Big endian bits/GPIOs ordering (mostly used on PowerPC).

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-jz4740.c: add alarm function

Add the "alarm" function to the jz4740 RTC.  Interrupts will now be raised
when the "alarm" time is reached.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds3232.c: add alarm function

The DS3232 RTC driver only has the tick function.  Add an alarm function
so the driver is complete.

Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: add rtc_valid_tm in s3c_rtc_gettime()

Add "rtc_valid_tm" in s3c_rtc_gettime() as per Wan ZongShun's suggestion.

Suggested-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: fix RTC initialization method

Change RTC initialization method in probe().  The 'rtc_valid_tm(tm)' can
check whether RTC BCD is valid or not.  And change the method of checking
because the previous method cannot validate RTC BCD registers properly.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: Fix debug message format on RTC

Fix debug message format.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: fix on support RTC Alarm

The alarm_irq_enable function should be implemented to support RTC alarm.
And fix tabs instead of white space around the proc field.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: fix setting missing field of getalarm

Current s3c_rtc_getalarm() sets missing field of alarm time with 0xff.
But this value should be -1 according to drivers/rtc/interface.c.

Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-s3c: fix access unit from byte to word on RTCCON

S3C2410_RTCCON of TYPE_S3C64XX RTC should be read/written by readw and
writew, because TYPE_S3C64XX RTC uses bit 8 and 9.  And TYPE_S3C2410 RTC
also can access it by readw and writew.

[atul.dahiya@samsung.com: tested on smdk2416]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Tested-by: Atul Dahiya <atul.dahiya@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: omap: let device wakeup capability be configured from chip init logic

The rtc-omap driver currently hardcodes the RTC wakeup capability to be
"not capable".  While this seems to be true for existing OMAP1 boards
which are not wired for this, the DA850/OMAP-L138 SoC, the RTC can always
be wake up source from its "deep sleep" mode.

This patch lets the wakeup capability be set from platform data and does
not override the setting from the driver.  For DA850/OMAP-L138, this is
done from arch/arm/mach-davinci/devices-da8xx.c:da8xx_register_rtc()

Note that this patch does not change the behavior on any existing OMAP1
board since the platform device registration sets the wakeup capability to
0 by default.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/class.c: fix device_register() error handling

If device_register() fails then call put_device().  See comment to
device_register.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-bfin: add debug markers to suspend/resume paths

The rest of the driver had debug markings already.  This also standardizes
the usage of "dev" a bit.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-bfin: shrink/optimize interrupt handler a bit

By unifying the RTC_ISTAT clearing steps, we shrink the interrupt handler
and avoid multiple writes to the hardware registers.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-lpc32xx: introduce RTC driver for the LPC32XX SoC

Add an RTC driver for the built-in RTC in the LPC32XX SoC.  This patch
includes updates from the initial review comments and updates from the v3
review.

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Signed-off-by: Durgesh Pattamatta <durgesh.pattamatta@nxp.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/vt_ioctl.c: fix VT_OPENQRY error value

When all VT's are in use, VT_OPENQRY casts -1 to unsigned char before
returning it to userspace as an int.  VT255 is not the next available
console.

Signed-off-by: Graham Gower <graham.gower@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dmi: log board, system, and BIOS information

Put basic system information in the dmesg log.  There are lots of dmesg
logs on the web, and it would be useful if they contained this information
for debugging platform problems.  "BOARD/PRODUCT" format copied from
show_regs_common(), which is used in the oops path.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tile: enable ARCH_DMA_ADDR_T_64BIT

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix race in kunmap_atomic()

Christoph reported a nice splat which illustrated a race in the new stack
based kmap_atomic implementation.

The problem is that we pop our stack slot before we're completely done
resetting its state -- in particular clearing the PTE (sometimes that's
CONFIG_DEBUG_HIGHMEM).  If an interrupt happens before we actually clear
the PTE used for the last slot, that interrupt can reuse the slot in a
dirty state, which triggers a BUG in kmap_atomic().

Fix this by introducing kmap_atomic_idx() which reports the current slot
index without actually releasing it and use that to find the PTE and delay
the _pop() until after we're completely done.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,x86: fix kmap_atomic_push vs ioremap_32.c

It appears i386 uses kmap_atomic infrastructure regardless of
CONFIG_HIGHMEM which results in a compile error when highmem is disabled.

Cure this by providing the needed few bits for both CONFIG_HIGHMEM and
CONFIG_X86_32.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix braino in fs: do not assign default i_ino in new_inode

usbfs_get_inode() is something completely different...

Bogosity introduced by commit 85fe4025c616 ("fs: do not assign default
i_ino in new_inode").

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'drm-core-next' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (476 commits)
  vmwgfx: Implement a proper GMR eviction mechanism
  drm/radeon/kms: fix r6xx/7xx 1D tiling CS checker v2
  drm/radeon/kms: properly compute group_size on 6xx/7xx
  drm/radeon/kms: fix 2D tile height alignment in the r600 CS checker
  drm/radeon/kms/evergreen: set the clear state to the blit state
  drm/radeon/kms: don't poll dac load detect.
  gpu: Add Intel GMA500(Poulsbo) Stub Driver
  drm/radeon/kms: MC vram map needs to be >= pci aperture size
  drm/radeon/kms: implement display watermark support for evergreen
  drm/radeon/kms/evergreen: add some additional safe regs v2
  drm/radeon/r600: fix tiling issues in CS checker.
  drm/i915: Move gpu_write_list to per-ring
  drm/i915: Invalidate the to-ring, flush the old-ring when updating domains
  drm/i915/ringbuffer: Write the value passed in to the tail register
  agp/intel: Restore valid PTE bit for Sandybridge after bdd3072
  drm/i915: Fix flushing regression from 9af90d19f
  drm/i915/sdvo: Remove unused encoding member
  i915: enable AVI infoframe for intel_hdmi.c [v4]
  drm/i915: Fix current fb blocking for page flip
  drm/i915: IS_IRONLAKE is synonymous with gen == 5
  ...

Fix up conflicts in
 - drivers/gpu/drm/i915/{i915_gem.c, i915/intel_overlay.c}: due to the
   new simplified stack-based kmap_atomic() interface
 - drivers/gpu/drm/vmwgfx/vmwgfx_drv.c: added .llseek entry due to BKL
   removal cleanups.

Merge branches 'upstream/xenfs' and 'upstream/core' of git://git./linux/kernel/git/jeremy/xen

* 'upstream/xenfs' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen/privcmd: make privcmd visible in domU
  xen/privcmd: move remap_domain_mfn_range() to core xen code and export.
  privcmd: MMAPBATCH: Fix error handling/reporting
  xenbus: export xen_store_interface for xenfs
  xen/privcmd: make sure vma is ours before doing anything to it
  xen/privcmd: print SIGBUS faults
  xen/xenfs: set_page_dirty is supposed to return true if it dirties
  xen/privcmd: create address space to allow writable mmaps
  xen: add privcmd driver
  xen: add variable hypercall caller
  xen: add xen_set_domain_pte()
  xen: add /proc/xen/xsd_{kva,port} to xenfs

* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (29 commits)
  xen: include xen/xen.h for definition of xen_initial_domain()
  xen: use host E820 map for dom0
  xen: correctly rebuild mfn list list after migration.
  xen: improvements to VIRQ_DEBUG output
  xen: set up IRQ before binding virq to evtchn
  xen: ensure that all event channels start off bound to VCPU 0
  xen/hvc: only notify if we actually sent something
  xen: don't add extra_pages for RAM after mem_end
  xen: add support for PAT
  xen: make sure xen_max_p2m_pfn is up to date
  xen: limit extra memory to a certain ratio of base
  xen: add extra pages for E820 RAM regions, even if beyond mem_end
  xen: make sure xen_extra_mem_start is beyond all non-RAM e820
  xen: implement "extra" memory to reserve space for pages not present at boot
  xen: Use host-provided E820 map
  xen: don't map missing memory
  xen: defer building p2m mfn structures until kernel is mapped
  xen: add return value to set_phys_to_machine()
  xen: convert p2m to a 3 level tree
  xen: make install_p2mtop_page() static
  ...

Fix up trivial conflict in arch/x86/xen/mmu.c, and fix the use of
'reserve_early()' - in the new memblock world order it is now
'memblock_x86_reserve_range()' instead. Pointed out by Jeremy.

vmwgfx: Implement a proper GMR eviction mechanism

Use Ben's new range manager hooks to implement a manager for
GMRs that manages ids rather than ranges.
This means we can use the standard TTM code for binding, unbinding and
eviction.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
  split invalidate_inodes()
  fs: skip I_FREEING inodes in writeback_sb_inodes
  fs: fold invalidate_list into invalidate_inodes
  fs: do not drop inode_lock in dispose_list
  fs: inode split IO and LRU lists
  fs: switch bdev inode bdi's correctly
  fs: fix buffer invalidation in invalidate_list
  fsnotify: use dget_parent
  smbfs: use dget_parent
  exportfs: use dget_parent
  fs: use RCU read side protection in d_validate
  fs: clean up dentry lru modification
  fs: split __shrink_dcache_sb
  fs: improve DCACHE_REFERENCED usage
  fs: use percpu counter for nr_dentry and nr_dentry_unused
  fs: simplify __d_free
  fs: take dcache_lock inside __d_path
  fs: do not assign default i_ino in new_inode
  fs: introduce a per-cpu last_ino allocator
  new helper: ihold()
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits)
  IB/qib: clean up properly if pci_set_consistent_dma_mask() fails
  IB/qib: Allow driver to load if PCIe AER fails
  IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set
  IB/qib: Fix extra log level in qib_early_err()
  RDMA/cxgb4: Remove unnecessary KERN_<level> use
  RDMA/cxgb3: Remove unnecessary KERN_<level> use
  IB/core: Add link layer type information to sysfs
  IB/mlx4: Add VLAN support for IBoE
  IB/core: Add VLAN support for IBoE
  IB/mlx4: Add support for IBoE
  mlx4_en: Change multicast promiscuous mode to support IBoE
  mlx4_core: Update data structures and constants for IBoE
  mlx4_core: Allow protocol drivers to find corresponding interfaces
  IB/uverbs: Return link layer type to userspace for query port operation
  IB/srp: Sync buffer before posting send
  IB/srp: Use list_first_entry()
  IB/srp: Reduce number of BUSY conditions
  IB/srp: Eliminate two forward declarations
  IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
  IB: Replace EXTRA_CFLAGS with ccflags-y
  ...

drm/radeon/kms: fix r6xx/7xx 1D tiling CS checker v2

broken by:
drm/radeon/r600: fix tiling issues in CS checker.

v2: only apply it to 1D tiling case.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

docbook: add idr/ida to kernel-api docbook

Add idr/ida to kernel-api docbook.
Fix typos and kernel-doc notation.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docbook: add more wait/wake/completion to device-drivers docbook

Add more wait, wake, and completion interfaces to the device-drivers
docbook.

Fix kernel-doc notation in the added files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

documentation: update sysrq.txt magic sysrq keys

Update Documentation/sysrq.txt magic sysrq keys:

 - 'g' is for kgdb (not arch-specific);
 - add 2 new uses for 'v', remove the Voyager info;
 - add 'y' info (SPARC-64 specific);

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <James.Bottomley@suse.de>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Alexander Shishkin <virtuoso@slind.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: fix recursive locking warning of lockdep from rpm_resume()

Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (53 commits)
  ACPI: install ACPI table handler before any dynamic tables being loaded
  ACPI / PM: Blacklist another machine that needs acpi_sleep=nonvs
  ACPI: Page based coalescing of I/O remappings optimization
  ACPI: Convert simple locking to RCU based locking
  ACPI: Pre-map 'system event' related register blocks
  ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Maintain a list of ACPI memory mapped I/O remappings
  ACPI: Fix ioremap size for MMIO reads and writes
  ACPI / Battery: Return -ENODEV for unknown values in get_property()
  ACPI / PM: Fix reference counting of power resources
  Subject: [PATCH] ACPICA: Fix Scope() op in module level code
  ACPI battery: support percentage battery remaining capacity
  ACPI: Make Embedded Controller command timeout delay configurable
  ACPI dock: move some functions to .init.text
  ACPI: thermal: remove unused limit code
  ACPI: static sleep_states[] and acpi_gts_bfs_check
  ACPI: remove dead code
  ACPI: delete dedicated MAINTAINERS entries for ACPI EC and BATTERY drivers
  ACPI: Only processor needs CPU_IDLE
  ACPICA: Update version to 20101013
  ...

Merge branch 'idle-release' of git://git./linux/kernel/git/lenb/linux-idle-2.6

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: do not use the LAPIC timer for ATOM C2
  intel_idle: add initial Sandy Bridge support
  acpi_idle: delete bogus data from cpuidle_state.power_usage
  intel_idle: delete bogus data from cpuidle_state.power_usage
  intel_idle: simplify test for leave_mm()

Merge branch 'sfi-release' of git://git./linux/kernel/git/lenb/linux-sfi-2.6

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: remove the v0.7 related definitions from sfi.h

Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: convert a BUG_ON to BUILD_BUG_ON
  arch/tile: make ptrace() work properly for TILE-Gx COMPAT mode
  arch/tile: support new info op generated by compiler
  arch/tile: minor whitespace/naming changes for string support files
  arch/tile: enable single-step support for TILE-Gx
  arch/tile: parameterize system PLs to support KVM port
  arch/tile: add Tilera's <arch/sim.h> header as an open-source header
  arch/tile: Bomb C99 comments to C89 comments in tile's <arch/sim_def.h>
  arch/tile: prevent corrupt top frame from causing backtracer runaway
  arch/tile: various top-level Makefile cleanups
  arch/tile: change lower bound on syscall error return to -4095
  arch/tile: properly export __mb_incoherent for modules
  arch/tile: provide a definition of MAP_STACK
  kmemleak: add TILE to the list of supported architectures.
  char: hvc: check for error case
  arch/tile: Add a warning if we try to allocate too much vmalloc memory.
  arch/tile: update some comments to clarify register usage.
  arch/tile: use better "punctuation" for VMSPLIT_3_5G and friends
  arch/tile: Use <asm-generic/syscalls.h>
  tile: replace some BUG_ON checks with BUILD_BUG_ON checks

Merge branch 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: rename nfs.upcall -> nfs.idmap
  NFS: Fix a compile issue in nfs_root

Merge branch 'akpm-incoming-1'

* akpm-incoming-1: (176 commits)
  scripts/checkpatch.pl: add check for declaration of pci_device_id
  scripts/checkpatch.pl: add warnings for static char that could be static const char
  checkpatch: version 0.31
  checkpatch: statement/block context analyser should look at sanitised lines
  checkpatch: handle EXPORT_SYMBOL for DEVICE_ATTR and similar
  checkpatch: clean up structure definition macro handline
  checkpatch: update copyright dates
  checkpatch: Add additional attribute #defines
  checkpatch: check for incorrect permissions
  checkpatch: ensure kconfig help checks only apply when we are adding help
  checkpatch: simplify and consolidate "missing space after" checks
  checkpatch: add check for space after struct, union, and enum
  checkpatch: returning errno typically should be negative
  checkpatch: handle casts better fixing false categorisation of : as binary
  checkpatch: ensure we do not collapse bracketed sections into constants
  checkpatch: suggest cleanpatch and cleanfile when appropriate
  checkpatch: types may sit on a line on their own
  checkpatch: fix regressions in "fix handling of leading spaces"
  div64_u64(): improve precision on 32bit platforms
  lib/parser: cleanup match_number()
  ...

scripts/checkpatch.pl: add check for declaration of pci_device_id

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/checkpatch.pl: add warnings for static char that could be static const char

Add warnings for possible missing const uses of
static char foo[] = "bar"
    that could be
static const char foo[] = "bar"
and
static const char *foo[] = {"bar", "baz"}
    that could be
static const char * const foo[] = {"bar", "baz"}

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: version 0.31

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: statement/block context analyser should look at sanitised lines

When tracking context to find a block or statement we need to use the
sanitised lines, else perentheses '(' & ')' and braces '{' & '}' can throw
the scanner out.  Also fix up a couple of error outputs which include
those sanitised lines incorrectly.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: handle EXPORT_SYMBOL for DEVICE_ATTR and similar

Handly definitions similar to below.  The definition macro spits out a
symbol with a prefix.  Add matching of any identifier prefix:

    DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
            ata_scsi_lpm_show, ata_scsi_lpm_put);
    EXPORT_SYMBOL_GPL(dev_attr_link_power_management_policy);

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: clean up structure definition macro handline

Handle definitions such as the following correctly, it is not
a complex statement:

    #define PREALLOC(NAME, START, END, FLAGS) {     \
    .name = (NAME),                 \
    .start = (START),               \
    .end = (END),                   \
    .flags = (FLAGS)                \
    },

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: update copyright dates

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: Add additional attribute #defines

On Wed, 2010-08-11 at 12:35 -0400, Dave Jones wrote:
> I just got this from a patch I merged..
>
> ERROR: need consistent spacing around '*' (ctx:WxV)
> #121: FILE: arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c:113:
> +static struct pcc_cpu __percpu *pcc_cpu_info;
>                                 ^
> which doesn't seem right.

Perhaps these need to be added to checkpatch.

[apw@canonical.com: added tests]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: check for incorrect permissions

Throw an error when a source file has been given execute permissions using
the mode change line present in git diffs.  Also alow the filename
matching to use the "diff" line in addition to the "+++" line, since the
mode change lines appear before any "+++" lines.

[apw@canonical.com: simplified filename logic slightly, added tests]
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: ensure kconfig help checks only apply when we are adding help

When checking the length of the help we need to be sure we are seeing the
whole story before erroring.  Firstly we only want to check when adding
the help in the first place.  Second we need to be sure that we are seeing
the end of the entry, nominally when there is no context below or that
context shows the start of the next entry.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: simplify and consolidate "missing space after" checks

Commonise the code for missing spaces after struct, union, and enum such
that they share the same code.  Ensure we cover all the common cases in
each case.  Check against the sanitised line to ensure we do not report on
comments and strings.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: add check for space after struct, union, and enum

Add spacing checks for struct, union, and enum definitions.  Check the
spacing after type and before the equals (=) and open brace ({).

Based on a patch by Joe Perches.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: returning errno typically should be negative

Add a (strict mode only) test to check for non-negative returns of what
appear to be errno values as the majority case these should indeed be
negative.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: handle casts better fixing false categorisation of : as binary

The following incantation is triggering categorisation of its colon (:) as
a binary form, which it is not:

return foo ? (s8)bar : baz;

Handle casts differently from types in the categoriser, allowing us to
better track (s8)bar as a value and not a declaration.

Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: ensure we do not collapse bracketed sections into constants

When determining if a return () sequence is a function style bracketing we
simplify the expression one bracket at a time replacing each with a
constant.  However this can trigger a false merge with expressions as
below:

return (foo)0;

Prevent this false merging.

Reported-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: suggest cleanpatch and cleanfile when appropriate

When we hit types of whitespace which may be fixed by scripts/cleanpatch
and scripts/cleanfile suggest their use in our report.

Suggested-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: types may sit on a line on their own

When the following form is used we have a type which fully fills a line.
This means that a type may end at the end of line as well as at the
following identifier.

int **
foo;

Reported-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: fix regressions in "fix handling of leading spaces"

The patch "checkpatch: fix handling of leading spaces" added checks for
leading spaces on lines, but this introduces regressions.  Firstly it does
not correctly detect when we are in a comment.  Secondly it does not allow
for preprocessor command spacing.  Finally it does not allow for label
indentation which is required to be less than one tab.  Fix these up:

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

div64_u64(): improve precision on 32bit platforms

The current implementation of div64_u64 for 32bit systems returns an
approximately correct result when the divisor exceeds 32bits.  Since doing
64bit division using 32bit hardware is a long since solved problem we just
use one of the existing proven methods.

Additionally, add a div64_s64 function to correctly handle doing signed
64bit division.

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=616105

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ben Woodard <bwoodard@llnl.gov>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Mark Grondona <mgrondona@llnl.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/parser: cleanup match_number()

Use new variable 'len' to make code more readable.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

percpu_counter: use this_cpu_ptr() instead of per_cpu_ptr()

this_cpu_ptr() avoids an array lookup and can use the percpu offset of the
local cpu directly.

Signed-off-by: Christoph Lameter <cl@linux.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_sort: test: check element addresses

Improve 'lib_sort()' test and check that:
 o 'cmp()' is called only for elements which were present in the original list,
   i.e., the 'a' and 'b' parameters are valid
 o the resulted (sorted) list consists onlly of the original elements
 o intdoruce "poison" fields to make sure data around 'struc list_head' field
   are not corrupted.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Don Mullis <don.mullis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_sort: test: unify test messages

This patch unifies 'list_sort_test()' messages a bit and makes sure all of
them start with the "list_sort_test:" prefix to make it obvious for users
where the messages come from.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Don Mullis <don.mullis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_sort: test: improve errors handling

The 'lib_sort()' test does not free memory if it fails, and it makes the
kernel panic if it cannot allocate memory.  This patch fixes the problem.

This patch also changes several small things:
 o use 'list_add()' helper instead of adding manually
 o introduce temporary 'el1' variable to avoid ugly and unreadalbe
   "if" statement
 o make 'head' to be stack variable instead of 'kmalloc()'ed, which
   simplifies code a bit

Overall, this patch is of clean-up type.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Don Mullis <don.mullis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_sort: test: use generic random32

Instead of using own pseudo-random generator, use generic linux
'random32()' function.  Presumably, this should improve test coverage.

At the same time, do the following changes:
  o Use shorter macro name for test list length
  o Do not use strange 'l_h' name for 'struct list_head' element,
    use 'list', because it is traditional name and thus, makes the
    code more obvious and readable.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Don Mullis <don.mullis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_sort: test: use more reasonable printk levels

I do not see any reason to use KERN_WARN for normal messages and
KERN_EMERG for error messages in the lib_sort testing routine.  Let's use
more reasonable KERN_NORM and KERN_ERR levels.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Don Mullis <don.mullis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/Kconfig.debug: add list_sort debugging switch

While hunting a non-existing bug in 'list_sort()', I've improved the
'list_sort_test()' function which tests the 'list_sort()' library call.
Although at the end I found a bug in my code, but not in 'list_sort()', I
think my clean-ups and improvements are worth merging because they make
the test function better.

This patch:

Make the self-tests selectable via Kconfig rather than by manual enabling
of DEBUG_LIST_SORT.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Don Mullis <don.mullis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

percpu_counter: add debugobj support

All percpu counters are linked to a global list on initialization and
removed from it on destruction.  The list is walked during CPU up/down.
If a percpu counter is freed without being properly destroyed, the system
will oops only on the next CPU up/down making it pretty nasty to track
down.  This patch adds debugobj support for percpu counters so that such
problems can be found easily.

As percpu counters don't make sense on stack and can't be statically
initialized, debugobj support is pretty simple.  It's initialized and
activated on counter initialization, and deactivatd and destroyed on
counter destruction.  With this patch applied, the bug fixed by commit
602586a83b719df0fbd94196a1359ed35aeb2df3 (shmem: put_super must
percpu_counter_destroy) triggers the following warning on tmpfs unmount
and the system won't oops on the next cpu up/down operation.

 ------------[ cut here ]------------
 WARNING: at lib/debugobjects.c:259 debug_print_object+0x5c/0x70()
 Hardware name: Bochs
 ODEBUG: free active (active state 0) object type: percpu_counter
 Modules linked in:
 Pid: 3999, comm: umount Not tainted 2.6.36-rc2-work+ #5
 Call Trace:
  [<ffffffff81083f7f>] warn_slowpath_common+0x7f/0xc0
  [<ffffffff81084076>] warn_slowpath_fmt+0x46/0x50
  [<ffffffff813b45cc>] debug_print_object+0x5c/0x70
  [<ffffffff813b50e5>] debug_check_no_obj_freed+0x125/0x210
  [<ffffffff811577d3>] kfree+0xb3/0x2f0
  [<ffffffff81132edd>] shmem_put_super+0x1d/0x30
  [<ffffffff81162e96>] generic_shutdown_super+0x56/0xe0
  [<ffffffff81162f86>] kill_anon_super+0x16/0x60
  [<ffffffff81162ff7>] kill_litter_super+0x27/0x30
  [<ffffffff81163295>] deactivate_locked_super+0x45/0x60
  [<ffffffff81163cfa>] deactivate_super+0x4a/0x70
  [<ffffffff8117d446>] mntput_no_expire+0x86/0xe0
  [<ffffffff8117df7f>] sys_umount+0x6f/0x360
  [<ffffffff8103f01b>] system_call_fastpath+0x16/0x1b
 ---[ end trace cce2a341ba3611a7 ]---

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Thomas Gleixner <tglxlinutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

idr: fix idr_pre_get() locking description

Despite the idr_pre_get() kernel-doc, there are some cases where you can
call idr_pre_get() from within locked regions.  Add a description for such
cases.

See also: http://lkml.org/lkml/2010/9/16/462

[akpm@linux-foundation.org: cleanups, grammatical fixes]
Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/bitmap.c: use hex_to_bin()

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: use "T: git" and whitespace trivia

Add missing git as a prefix for git repositories in the few places it
wasn't already used.

Convert a space delimiter to a tab.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove USB ZC0301 DRIVER

Removed by commit 0d58cef664e01f ("V4L/DVB: Remove obsolete zc0301 v4l
driver").

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Amerigo Wang <amwang@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: remove USB OV511 DRIVER

Removed by commit 7373ab3669aec93 ("V4L/DVB: Remove obsolete ov511
driver").

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Amerigo Wang <amwang@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: merge s3c6400 and 6410 to 64xx

Removed by commit 431107ea5b680a24a ("ARM: S3C64XX: Merge mach-s3c6400 and
mach-s3c6410").

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: merge s3c-244x sections

Removed by commit 70556b143ae4c ("ARM: S3C24XX: Remove old mach-s3c2442").

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: merge imote2 and stargate

Removed by commit dcd925f95194da4 ("pxa: merge stargate2 and imote2 board
files").

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: fix Colibri PXA270 file pattern

The original commit 403d29713e0a ("pxa/income: Add Income SBC support")
started with the wrong file pattern.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: don't deduplicate unnamed addresses ie: mailing lists

Fix a defect with the first mailing list address being used for each
subsequent mailing list.

Updated to 0.26-beta6.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: use mailmap in name deduplication and other updates

Use Florian Mickler's mailmap routine to reduce name duplication.

o Add subroutine deduplicate_email to centralize code
o Add hashes for deduplicate_(name|address)_hash
o Remove now unused @interactive_to
o Whitespace neatening
o Add command line --help text
o Add --mailmap command line option control
o Interactive changes:
   - Add toggles for maintainer, git and list selections
   - Default selection is all
   - Add mailmap control

Update to 0.26-beta5

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: correct indentation in a few places

And a miscellaneous conversion of You to you in a help message

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: fix mailmap handling

Implement it, like it is described in git-shortlog.

Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: use case insensitive name de-duplication

Case insensitive name and email address matching can help reduce
duplication when authors don't always use the exact same signature.

o Add a --interactive per-file exact_match hash so git history
  can be checked on per-file only when there is no direct maintainer
o Make @interactive_to list global so save_commits_by_<foo> can check
  email names & addresses against this list for duplication
o Don't allow --interactive and --sections
o rename subroutine get_maintainer to get_maintainers
o Added help text option to --interactive menu prompt

Update version to 0.26-beta4

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: improve --interactive UI

o Added searching by git-blame as well as git-history
o Added different selection toggles
o Added ability to list commits by author or by sign-off-type
o Use custom git and hg formats to make searching for subject/author
  a bit easier.
o Move inlined section matching and searching git/hg history to
  new get_maintainer subroutine
o Added subroutines save_commits_by_author and save_commits_by_signer
o Removed subroutines vcs_get_shortlog and vcs_email_shortlog
o Rename camelcase signaturePattern to signature_pattern

Update to 0.26 beta3

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: add interactive mode

This is a first version of an interactive mode for
scripts/get_maintainer.pl.

It allows the user to interact with the script.  Each cc candidate can be
selected and deselected and a shortlog of authored commits can be
displayed for each candidate.

The menu is displayed via STDERR, the end result is outputted to STDOUT.
This unusual mechanism allows using get_maintainer.pl in interactive mode
via git send-email --cc-cmd.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: use .get_maintainer.conf from . then $HOME then scripts

On Mon, 2010-09-13 at 00:01 -0400, Valdis.Kletnieks@vt.edu wrote:
> Any chance of getting that to be ~/.get_maintainer.conf rather than
> ./.get_maintainer.conf? I've just gotten bit like the 3rd or 4th time by
> "oh but you didn't create that file in *this* tree"
> (I usually have a linus git tree, a linux-next tree, and 3-4 -mm trees)

Sure.

Add a search path for the .conf file.

3 paths are added:

.             customized per-tree configurations
$HOME         user global configuration when per-tree configs don't exist
./scripts     lk defaults to override script

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: add default --git-fallback, remove default --git

Adding commit signers when there is a listed MAINTAINER for a file
can make the output list longer than necessary.

Change the --git default from on to off.

Add a new --git-fallback option (default on) used to add commit signers
only when there is no MAINTAINER for a file.

git history is used when --git-fallback is enabled and the pattern
directory depth is not the same as the file directory depth.

For instance:

X86 ARCHITECTURE (32-BIT AND 64-BIT)
M: Thomas Gleixner <tglx@linutronix.de>
M: Ingo Molnar <mingo@redhat.com>
M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
F: Documentation/x86/
F: arch/x86/

If using "./scripts/get_maintainer -f arch/x86/lib/atomic64_32.c", the pattern
for "arch/x86/" does not match the directory depth of "arch/x86/lib"
so the MAINTAINERS entries and git history is used to produce:

$ ./scripts/get_maintainer.pl -f --rolestats arch/x86/lib/atomic64_32.c
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE...)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE...)
"H. Peter Anvin" <hpa@zytor.com> (maintainer:X86 ARCHITECTURE...,commit_signer:1/1=100%)
x86@kernel.org (maintainer:X86 ARCHITECTURE...)
Luca Barbieri <luca@luca-barbieri.com> (commit_signer:1/1=100%)
linux-kernel@vger.kernel.org (open list)

Luca Barbieri is added because he signed the only commit to
arch/x86/lib/atomic64_32.c during the last year and he meets the
other default qualifications.
--git-min-percent (default:10)
--git-min-signatures (default:1)

If current users of ./scripts/get_maintainers.pl have scripts
that use --nogit that expect git history to be excluded, those
scripts should be updated to include --nogit-fallback or a
.get_maintainer.conf file should be created with --nogit-fallback.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: don't search MAINTAINERS for keywords or emails

Keyword matching uses K: patterns from MAINTAINERS, so if looking for the
MAINTAINERS maintainer, don't search MAINTAINERS for pattern matches.
MAINTAINERS also has rather a lot of email addresses and is easily
searched using grep "^M:", so skip it.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: use correct indentation

Fix an overly indented block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: Add --git-blame --rolestats "Authored lines" information

When options --git-blame and --rolestats are specified, add
the maintainers with the qualifying --git-min-percent amount
of lines authored of the complete file.  Does not add more
authors than specified by --git-max-maintainers.

For anyone using hg, this option works but is _very_ slow.
It's orders of magnitude slower than git slow.

The get_maintainer.pl version was incremented to 0.25.

This can be used with or without --git.

For instance:

$ ./scripts/get_maintainer.pl --git-blame --nogit --rolestats -f lib/bitmap.c
Paul Jackson <pj@sgi.com> (authored lines:406/613=66%,commits:7/20=35%)
Akinobu Mita <mita@miraclelinux.com> (authored lines:87/613=14%,commits:3/20=15%)
Reinette Chatre <reinette.chatre@linux.intel.com> (authored lines:42/613=7%)
Andrew Morton <akpm@linux-foundation.org> (commits:16/20=80%)
Paul Mundt <lethal@linux-sh.org> (commits:3/20=15%)
Randy Dunlap <randy.dunlap@oracle.com> (commits:2/20=10%)

$ ./scripts/get_maintainer.pl --git-blame --git --rolestats -f lib/bitmap.c
Andrew Morton <akpm@linux-foundation.org> (commit_signer:4/5=80%,commits:16/20=80%)
Akinobu Mita <akinobu.mita@gmail.com> (commit_signer:2/5=40%,authored lines:87/613=14%,commits:3/20=15%)
Jack Steiner <steiner@sgi.com> (commit_signer:1/5=20%)
Ben Hutchings <ben@decadent.org.uk> (commit_signer:1/5=20%)
Lee Schermerhorn <lee.schermerhorn@hp.com> (commit_signer:1/5=20%)
Paul Jackson <pj@sgi.com> (authored lines:406/613=66%,commits:7/20=35%)
Reinette Chatre <reinette.chatre@linux.intel.com> (authored lines:42/613=7%)
Paul Mundt <lethal@linux-sh.org> (commits:3/20=15%)
Randy Dunlap <randy.dunlap@oracle.com> (commits:2/20=10%)
linux-kernel@vger.kernel.org (open list)

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: fix scnprintf() if @size is == 0

scnprintf() should return 0 if @size is == 0. Update the comment for it,
as @size is unsigned.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vsprintf.c: use default pointer field size for "(null)" strings

It might be nicer to align the output.

For instance, ACPI messages sometimes have "(null)" pointers.

$ dmesg | grep "(null)"  -A 1 -B 1
[    0.198733] ACPI: Dynamic OEM Table Load:
[    0.198745] ACPI: SSDT (null) 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.199294] ACPI: SSDT 7f596e10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.200708] ACPI: Dynamic OEM Table Load:
[    0.200721] ACPI: SSDT (null) 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.201950] ACPI: SSDT 7f597f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.203386] ACPI: Dynamic OEM Table Load:
[    0.203398] ACPI: SSDT (null) 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.203871] ACPI: SSDT 7f595f10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.205301] ACPI: Dynamic OEM Table Load:
[    0.205315] ACPI: SSDT (null) 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)

[akpm@linux-foundation.org: add code comment]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ratelimit: add comment warning people off printk_ratelimit()

printk_ratelimit() was a bad idea - we don't want subsytem A causing
ratelimiting of subsystem B's messages.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>