pandora-kernel.git
8 years agoACPI: Add DMI entry for Sony VGN-FW41E_H
Joseph Salisbury [Tue, 5 Feb 2013 00:16:29 +0000 (00:16 +0000)]
ACPI: Add DMI entry for Sony VGN-FW41E_H

commit 66f2fda93b67fa744d406e6dcf443f67bac204b6 upstream.

This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume
properly.

References: http://bugs.launchpad.net/bugs/1113547
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agostaging: comedi: check s->async for poll(), read() and write()
Ian Abbott [Wed, 27 Feb 2013 10:56:19 +0000 (10:56 +0000)]
staging: comedi: check s->async for poll(), read() and write()

commit cc400e185c07c15a42d2635995f422de5b94b696 upstream.

Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or
`dev->write_subdev` to a subdevice that does not support asynchronous
commands.  Comedi's poll(), read() and write() file operation handlers
assume these subdevices do support asynchronous commands.  In
particular, they assume `s->async` is valid (where `s` points to the
read or write subdevice), which it won't be if it has been set
incorrectly.  This can lead to a NULL pointer dereference.

Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and
`comedi_write()` to avoid the bug.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonfsd: Fix memleak
majianpeng [Tue, 29 Jan 2013 05:16:06 +0000 (13:16 +0800)]
nfsd: Fix memleak

commit 2d32b29a1c2830f7c42caa8258c714acd983961f upstream.

When free nfs-client, it must free the ->cl_stateids.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agohrtimer: Prevent hrtimer_enqueue_reprogram race
Leonid Shatz [Mon, 4 Feb 2013 12:33:37 +0000 (14:33 +0200)]
hrtimer: Prevent hrtimer_enqueue_reprogram race

commit b22affe0aef429d657bc6505aacb1c569340ddd2 upstream.

hrtimer_enqueue_reprogram contains a race which could result in
timer.base switch during unlock/lock sequence.

hrtimer_enqueue_reprogram is releasing the lock protecting the timer
base for calling raise_softirq_irqsoff() due to a lock ordering issue
versus rq->lock.

If during that time another CPU calls __hrtimer_start_range_ns() on
the same hrtimer, the timer base might switch, before the current CPU
can lock base->lock again and therefor the unlock_timer_base() call
will unlock the wrong lock.

[ tglx: Added comment and massaged changelog ]

Signed-off-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Link: http://lkml.kernel.org/r/1359981217-389-1-git-send-email-izik.eidus@ravellosystems.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotty: set_termios/set_termiox should not return -EINTR
Oleg Nesterov [Tue, 29 Jan 2013 19:07:41 +0000 (20:07 +0100)]
tty: set_termios/set_termiox should not return -EINTR

commit 183d95cdd834381c594d3aa801c1f9f9c0c54fa9 upstream.

See https://bugzilla.redhat.com/show_bug.cgi?id=904907
read command causes bash to abort with double free or corruption (out).

A simple test-case from Roman:

// Compile the reproducer and send sigchld ti that process.
// EINTR occurs even if SA_RESTART flag is set.

void handler(int sig)
{
}

main()
{
  struct sigaction act;
  act.sa_handler = handler;
  act.sa_flags = SA_RESTART;
  sigaction (SIGCHLD, &act, 0);
  struct termio ttp;
  ioctl(0, TCGETA, &ttp);
  while(1)
  {
    if (ioctl(0, TCSETAW, ttp) < 0)
      {
if (errno == EINTR)
{
  fprintf(stderr, "BUG!"); return(1);
}
      }
  }
}

Change set_termios/set_termiox to return -ERESTARTSYS to fix this
particular problem.

I didn't dare to change other EINTR's in drivers/tty/, but they look
equally wrong.

Reported-by: Roman Rakus <rrakus@redhat.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUBIFS: fix double free of ubifs_orphan objects
Adam Thomas [Sat, 2 Feb 2013 22:35:08 +0000 (22:35 +0000)]
UBIFS: fix double free of ubifs_orphan objects

commit 8afd500cb52a5d00bab4525dd5a560d199f979b9 upstream.

The last orphan in the dnext list has its dnext set to NULL. Because
of that, ubifs_delete_orphan assumes that it is not on the dnext list
and frees it immediately instead ignoring it as a second delete. The
orphan is later freed again by erase_deleted.

This change adds an explicit flag to ubifs_orphan indicating whether
it is pending delete.

Signed-off-by: Adam Thomas <adamthomas1111@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoALSA: aloop: Fix Oops while PM resume
Takashi Iwai [Mon, 4 Feb 2013 09:28:15 +0000 (10:28 +0100)]
ALSA: aloop: Fix Oops while PM resume

commit edac894389f9c9de2a1368c78809c824b343f3a5 upstream.

snd-aloop driver has no proper PM implementation, thus the PM resume
may trigger Oops due to leftover timer instance.  This patch adds the
missing suspend/resume implementation.

Reported-and-tested-by: El boulangero <elboulangero@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoDriver core: treat unregistered bus_types as having no devices
Bjorn Helgaas [Tue, 29 Jan 2013 23:44:27 +0000 (16:44 -0700)]
Driver core: treat unregistered bus_types as having no devices

commit 4fa3e78be7e985ca814ce2aa0c09cbee404efcf7 upstream.

A bus_type has a list of devices (klist_devices), but the list and the
subsys_private structure that contains it are not initialized until the
bus_type is registered with bus_register().

The panic/reboot path has fixups that look up devices in pci_bus_type.  If
we panic before registering pci_bus_type, the bus_type exists but the list
does not, so mach_reboot_fixups() trips over a null pointer and panics
again:

    mach_reboot_fixups
      pci_get_device
        ..
          bus_find_device(&pci_bus_type, ...)
            bus->p is NULL

Joonsoo reported a problem when panicking before PCI was initialized.
I think this patch should be sufficient to replace the patch he posted
here: https://lkml.org/lkml/2012/12/28/75 ("[PATCH] x86, reboot: skip
reboot_fixups in early boot phase")

Reported-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agozram: Fix deadlock bug in partial read/write
Minchan Kim [Wed, 30 Jan 2013 02:41:39 +0000 (11:41 +0900)]
zram: Fix deadlock bug in partial read/write

commit 7e5a5104c6af709a8d97d5f4711e7c917761d464 upstream.

Now zram allocates new page with GFP_KERNEL in zram I/O path
if IO is partial. Unfortunately, It may cause deadlock with
reclaim path like below.

write_page from fs
fs_lock
allocation(GFP_KERNEL)
reclaim
pageout
write_page from fs
fs_lock <-- deadlock

This patch fixes it by using GFP_NOIO.  In read path, we
reorganize code flow so that kmap_atomic is called after the
GFP_NOIO allocation.

Acked-by: Jerome Marchand <jmarchand@redhat.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
[ penberg@kernel.org: don't use GFP_ATOMIC ]
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: no reordering is needed in the read path]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoext4: fix race in ext4_mb_add_n_trim()
Niu Yawei [Sat, 2 Feb 2013 02:31:27 +0000 (21:31 -0500)]
ext4: fix race in ext4_mb_add_n_trim()

commit f1167009711032b0d747ec89a632a626c901a1ad upstream.

In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoALSA: hda - Release assigned pin/cvt at error path of hdmi_pcm_open()
Takashi Iwai [Fri, 1 Feb 2013 13:01:27 +0000 (14:01 +0100)]
ALSA: hda - Release assigned pin/cvt at error path of hdmi_pcm_open()

commit 2ad779b7329d6894a80df94e693e72eaa0d56790 upstream.

If the driver detects and invalid ELD, it gives an open error.
But it forgot to release the assigned pin, converter and spdif ctls
before returning.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agox86-32, mm: Rip out x86_32 NUMA remapping code
Dave Hansen [Thu, 31 Jan 2013 00:56:16 +0000 (16:56 -0800)]
x86-32, mm: Rip out x86_32 NUMA remapping code

commit f03574f2d5b2d6229dcdf2d322848065f72953c7 upstream.

This code was an optimization for 32-bit NUMA systems.

It has probably been the cause of a number of subtle bugs over
the years, although the conditions to excite them would have
been hard to trigger.  Essentially, we remap part of the kernel
linear mapping area, and then sometimes part of that area gets
freed back in to the bootmem allocator.  If those pages get
used by kernel data structures (say mem_map[] or a dentry),
there's no big deal.  But, if anyone ever tried to use the
linear mapping for these pages _and_ cared about their physical
address, bad things happen.

For instance, say you passed __GFP_ZERO to the page allocator
and then happened to get handed one of these pages, it zero the
remapped page, but it would make a pte to the _old_ page.
There are probably a hundred other ways that it could screw
with things.

We don't need to hang on to performance optimizations for
these old boxes any more.  All my 32-bit NUMA systems are long
dead and buried, and I probably had access to more than most
people.

This code is causing real things to break today:

https://lkml.org/lkml/2013/1/9/376

I looked in to actually fixing this, but it requires surgery
to way too much brittle code, as well as stuff like
per_cpu_ptr_to_phys().

[ hpa: Cc: this for -stable, since it is a memory corruption issue.
  However, an alternative is to simply mark NUMA as depends BROKEN
  rather than EXPERIMENTAL in the X86_32 subclause... ]

Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
[bwh: For 3.2, using the suggested alternative]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoALSA: usb-audio: fix Roland A-PRO support
Clemens Ladisch [Thu, 31 Jan 2013 20:14:33 +0000 (21:14 +0100)]
ALSA: usb-audio: fix Roland A-PRO support

commit 7da58046482fceb17c4a0d4afefd9507ec56de7f upstream.

The quirk for the Roland/Cakewalk A-PRO keyboards accidentally used the
wrong interface number, which prevented the driver from attaching to the
device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agostaging: comedi: disallow COMEDI_DEVCONFIG on non-board minors
Ian Abbott [Mon, 28 Jan 2013 16:14:31 +0000 (16:14 +0000)]
staging: comedi: disallow COMEDI_DEVCONFIG on non-board minors

commit 754ab5c0e55dd118273ca2c217c4d95e9fbc8259 upstream.

Comedi has two sorts of minor devices:
(a) normal board minor devices in the range 0 to
COMEDI_NUM_BOARD_MINORS-1 inclusive; and
(b) special subdevice minor devices in the range COMEDI_NUM_BOARD_MINORS
upwards that are used to open the same underlying comedi device as the
normal board minor devices, but with non-default read and write
subdevices for asynchronous commands.

The special subdevice minor devices get created when a board supporting
asynchronous commands is attached to a normal board minor device, and
destroyed when the board is detached from the normal board minor device.
One way to attach or detach a board is by using the COMEDI_DEVCONFIG
ioctl.  This should only be used on normal board minors as the special
subdevice minors are too ephemeral.  In particular, the change
introduced in commit 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c ("staging:
comedi: prevent auto-unconfig of manually configured devices") breaks
horribly for special subdevice minor devices.

Since there's no legitimate use for the COMEDI_DEVCONFIG ioctl on a
special subdevice minor device node, disallow it and return -ENOTTY.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agos390/kvm: Fix store status for ACRS/FPRS
Christian Borntraeger [Fri, 25 Jan 2013 14:34:15 +0000 (15:34 +0100)]
s390/kvm: Fix store status for ACRS/FPRS

commit 15bc8d8457875f495c59d933b05770ba88d1eacb upstream.

On store status we need to copy the current state of registers
into a save area. Currently we might save stale versions:
The sie state descriptor doesnt have fields for guest ACRS,FPRS,
those registers are simply stored in the host registers. The host
program must copy these away if needed. We do that in vcpu_put/load.

If we now do a store status in KVM code between vcpu_put/load, the
saved values are not up-to-date. Lets collect the ACRS/FPRS before
saving them.

This also fixes some strange problems with hotplug and virtio-ccw,
since the low level machine check handler (on hotplug a machine check
will happen) will revalidate all registers with the content of the
save area.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
[bwh: Backported to 3.2 as done in 3.0 by Jiri Slaby]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
8 years agoext4: fix possible use-after-free with AIO
Jan Kara [Wed, 30 Jan 2013 03:48:17 +0000 (22:48 -0500)]
ext4: fix possible use-after-free with AIO

commit 091e26dfc156aeb3b73bc5c5f277e433ad39331c upstream.

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoquota: autoload the quota_v2 module for QFMT_VFS_V1 quota format
Theodore Ts'o [Fri, 25 Jan 2013 04:24:56 +0000 (23:24 -0500)]
quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format

commit c3ad83d9efdfe6a86efd44945a781f00c879b7b4 upstream.

Otherwise, ext4 file systems with the quota featured enable will get a
very confusing "No such process" error message if the quota code is
built as a module and the quota_v2 module has not been loaded.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: option: add and update Alcatel modems
Bjørn Mork [Wed, 23 Jan 2013 09:44:36 +0000 (10:44 +0100)]
USB: option: add and update Alcatel modems

commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream.

Adding three currently unsupported modems based on information
from .inf driver files:

  Diag  VID_1BBB&PID_0052&MI_00
  AGPS  VID_1BBB&PID_0052&MI_01
  VOICE VID_1BBB&PID_0052&MI_02
  AT    VID_1BBB&PID_0052&MI_03
  Modem VID_1BBB&PID_0052&MI_05
  wwan  VID_1BBB&PID_0052&MI_06

  Diag  VID_1BBB&PID_00B6&MI_00
  AT    VID_1BBB&PID_00B6&MI_01
  Modem VID_1BBB&PID_00B6&MI_02
  wwan  VID_1BBB&PID_00B6&MI_03

  Diag  VID_1BBB&PID_00B7&MI_00
  AGPS  VID_1BBB&PID_00B7&MI_01
  VOICE VID_1BBB&PID_00B7&MI_02
  AT    VID_1BBB&PID_00B7&MI_03
  Modem VID_1BBB&PID_00B7&MI_04
  wwan  VID_1BBB&PID_00B7&MI_05

Updating the blacklist info for the X060S_X200 and X220_X500D,
reserving interfaces for a wwan driver, based on

  wwan VID_1BBB&PID_0000&MI_04
  wwan VID_1BBB&PID_0017&MI_06

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoARM: PXA3xx: program the CSMSADRCFG register
Igor Grinberg [Sun, 13 Jan 2013 11:49:47 +0000 (13:49 +0200)]
ARM: PXA3xx: program the CSMSADRCFG register

commit d107a204154ddd79339203c2deeb7433f0cf6777 upstream.

The Chip Select Configuration Register must be programmed to 0x2 in
order to achieve the correct behavior of the Static Memory Controller.

Without this patch devices wired to DFI and accessed through SMC cannot
be accessed after resume from S2.

Do not rely on the boot loader to program the CSMSADRCFG register by
programming it in the kernel smemc module.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoPurge existing TLB entries in set_pte_at and ptep_set_wrprotect
John David Anglin [Tue, 15 Jan 2013 00:45:00 +0000 (19:45 -0500)]
Purge existing TLB entries in set_pte_at and ptep_set_wrprotect

commit 7139bc1579901b53db7e898789e916ee2fb52d78 upstream.

This patch goes a long way toward fixing the minifail bug, and
it  significantly improves the stability of SMP machines such as
the rp3440.  When write  protecting a page for COW, we need to
purge the existing translation.  Otherwise, the COW break
doesn't occur as expected because the TLB may still have a stale entry
which allows writes.

[jejb: fix up checkpatch errors]
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopcmcia/vrc4171: Add missing spinlock init
Jean Delvare [Sun, 16 Dec 2012 21:00:50 +0000 (22:00 +0100)]
pcmcia/vrc4171: Add missing spinlock init

commit 811af9723859884f2f771f3174f3ddedab7c53b5 upstream.

It doesn't seem this spinlock was properly initialized. This bug was
introduced by commit 7a410e8d4d97457c8c381e2de9cdc7bd3306badc.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoext4: return ENOMEM if sb_getblk() fails
Theodore Ts'o [Sat, 12 Jan 2013 21:19:36 +0000 (16:19 -0500)]
ext4: return ENOMEM if sb_getblk() fails

commit 860d21e2c585f7ee8a4ecc06f474fdc33c9474f4 upstream.

The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So ENOMEM is more appropriate than EIO.  In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[bwh: Backported to 3.2:
 - Adjust context
 - Drop change to inline.c
 - Call to ext4_ext_check() from ext4_ext_find_extent() is conditional]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopowerpc/eeh: Fix crash when adding a device in a slot with DDW
Thadeu Lima de Souza Cascardo [Fri, 28 Dec 2012 09:13:19 +0000 (09:13 +0000)]
powerpc/eeh: Fix crash when adding a device in a slot with DDW

commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.

The DDW code uses a eeh_dev struct from the pci_dev. However, this is
not set until eeh_add_device_late is called.

Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
devices are added to the bus, making drivers' probe hooks to be called.
These will call set_dma_mask, which will call the DDW code, which will
require the eeh_dev struct from pci_dev. This would result in a crash,
due to a NULL dereference.

Calling eeh_add_device_late after pci_bus_add_devices would make the
system BUG, because device files shouldn't be added to devices there
were not added to the system. So, a new function is needed to add such
files only after pci_bus_add_devices have been called.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodca: check against empty dca_domains list before unregister provider
Maciej Sosnowski [Wed, 23 May 2012 15:27:07 +0000 (17:27 +0200)]
dca: check against empty dca_domains list before unregister provider

commit c419fcfd071cf34ba00f9f65282583772d2655e7 upstream.

When providers get blocked unregister_dca_providers() is called ending up
with dca_providers and dca_domain lists emptied. Dca should be prevented from
trying to unregister any provider if dca_domain list is found empty.

Reported-by: Jiang Liu <jiang.liu@huawei.com>
Tested-by: Gaohuai Han <hangaohuai@huawei.com>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoomap_vout: find_vma() needs ->mmap_sem held
Al Viro [Sun, 16 Dec 2012 19:04:46 +0000 (16:04 -0300)]
omap_vout: find_vma() needs ->mmap_sem held

commit 55ee64b30a38d688232e5eb2860467dddc493573 upstream.

Walking rbtree while it's modified is a Bad Idea(tm); besides,
the result of find_vma() can be freed just as it's getting returned
to caller.  Fortunately, it's easy to fix - just take ->mmap_sem a bit
earlier (and don't bother with find_vma() at all if virtp >= PAGE_OFFSET -
in that case we don't even look at its result).

While we are at it, what prevents VIDIOC_PREPARE_BUF calling
v4l_prepare_buf() -> (e.g) vb2_ioctl_prepare_buf() -> vb2_prepare_buf() ->
__buf_prepare() -> __qbuf_userptr() -> vb2_vmalloc_get_userptr() -> find_vma(),
AFAICS without having taken ->mmap_sem anywhere in process?  The code flow
is bloody convoluted and depends on a bunch of things done by initialization,
so I certainly might've missed something...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <archit@ti.com>
Cc: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agov4l: Reset subdev v4l2_dev field to NULL if registration fails
Laurent Pinchart [Sun, 25 Nov 2012 00:35:48 +0000 (21:35 -0300)]
v4l: Reset subdev v4l2_dev field to NULL if registration fails

commit 317efce991620adc589b3005b9baed433dcb2a56 upstream.

When subdev registration fails the subdev v4l2_dev field is left to a
non-NULL value. Later calls to v4l2_device_unregister_subdev() will
consider the subdev as registered and will module_put() the subdev
module without any matching module_get().
Fix this by setting the subdev v4l2_dev field to NULL in
v4l2_device_register_subdev() when the function fails.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[bwh: Backported to 3.2: adjust context, filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoworkqueue: consider work function when searching for busy work items
Tejun Heo [Tue, 18 Dec 2012 18:35:02 +0000 (10:35 -0800)]
workqueue: consider work function when searching for busy work items

commit a2c1c57be8d9fd5b716113c8991d3d702eeacf77 upstream.

To avoid executing the same work item concurrenlty, workqueue hashes
currently busy workers according to their current work items and looks
up the the table when it wants to execute a new work item.  If there
already is a worker which is executing the new work item, the new item
is queued to the found worker so that it gets executed only after the
current execution finishes.

Unfortunately, a work item may be freed while being executed and thus
recycled for different purposes.  If it gets recycled for a different
work item and queued while the previous execution is still in
progress, workqueue may make the new work item wait for the old one
although the two aren't really related in any way.

In extreme cases, this false dependency may lead to deadlock although
it's extremely unlikely given that there aren't too many self-freeing
work item users and they usually don't wait for other work items.

To alleviate the problem, record the current work function in each
busy worker and match it together with the work item address in
find_worker_executing_work().  While this isn't complete, it ensures
that unrelated work items don't interact with each other and in the
very unlikely case where a twisted wq user triggers it, it's always
onto itself making the culprit easy to spot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Isakov <andy51@gmx.ru>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701
[bwh: Backported to 3.2:
 - Adjust context
 - Incorporate earlier logging cleanup in process_one_work() from
   044c782ce3a9 ('workqueue: fix checkpatch issues')]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoKVM: s390: Handle hosts not supporting s390-virtio.
Cornelia Huck [Fri, 14 Dec 2012 16:02:16 +0000 (17:02 +0100)]
KVM: s390: Handle hosts not supporting s390-virtio.

commit 55c171a6d90dc0574021f9c836127cfd1a7d2e30 upstream.

Running under a kvm host does not necessarily imply the presence of
a page mapped above the main memory with the virtio information;
however, the code includes a hard coded access to that page.

Instead, check for the presence of the page and exit gracefully
before we hit an addressing exception if it does not exist.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agogenirq: Avoid deadlock in spurious handling
Thomas Gleixner [Fri, 23 Nov 2012 09:08:44 +0000 (10:08 +0100)]
genirq: Avoid deadlock in spurious handling

commit e716efde75267eab919cdb2bef5b2cb77f305326 upstream.

commit 52553ddf(genirq: fix regression in irqfixup, irqpoll)
introduced a potential deadlock by calling the action handler with the
irq descriptor lock held.

Remove the call and let the handling code run even for an interrupt
where only a single action is registered. That matches the goal of
the above commit and avoids the deadlock.

Document the confusing action = desc->action reload in the handling
loop while at it.

Reported-and-tested-by: "Wang, Warner" <warner.wang@hp.com>
Tested-by: Edward Donovan <edward.donovan@numble.net>
Cc: "Wang, Song-Bo (Stoney)" <song-bo.wang@hp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agosunvdc: Fix off-by-one in generic_request().
David S. Miller [Thu, 14 Feb 2013 19:49:01 +0000 (11:49 -0800)]
sunvdc: Fix off-by-one in generic_request().

[ Upstream commit f4d9605434c0fd4cc8639bf25cfc043418c52362 ]

The 'operations' bitmap corresponds one-for-one with the operation
codes, no adjustment is necessary.

Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoLinux 3.2.39 v3.2.39
Ben Hutchings [Wed, 20 Feb 2013 03:15:40 +0000 (03:15 +0000)]
Linux 3.2.39

8 years agox86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
Jan Beulich [Thu, 24 Jan 2013 13:11:10 +0000 (13:11 +0000)]
x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.

commit 13d2b4d11d69a92574a55bfd985cfb0ca77aebdc upstream.

This fixes CVE-2013-0228 / XSA-42

Drew Jones while working on CVE-2013-0190 found that that unprivileged guest user
in 32bit PV guest can use to crash the > guest with the panic like this:

-------------
general protection fault: 0000 [#1] SMP
last sysfs file: /sys/devices/vbd-51712/block/xvda/dev
Modules linked in: sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4
iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6
xt_state nf_conntrack ip6table_filter ip6_tables ipv6 xen_netfront ext4
mbcache jbd2 xen_blkfront dm_mirror dm_region_hash dm_log dm_mod [last
unloaded: scsi_wait_scan]

Pid: 1250, comm: r Not tainted 2.6.32-356.el6.i686 #1
EIP: 0061:[<c0407462>] EFLAGS: 00010086 CPU: 0
EIP is at xen_iret+0x12/0x2b
EAX: eb8d0000 EBX: 00000001 ECX: 08049860 EDX: 00000010
ESI: 00000000 EDI: 003d0f00 EBP: b77f8388 ESP: eb8d1fe0
 DS: 0000 ES: 007b FS: 0000 GS: 00e0 SS: 0069
Process r (pid: 1250, ti=eb8d0000 task=c2953550 task.ti=eb8d0000)
Stack:
 00000000 0027f416 00000073 00000206 b77f8364 0000007b 00000000 00000000
Call Trace:
Code: c3 8b 44 24 18 81 4c 24 38 00 02 00 00 8d 64 24 30 e9 03 00 00 00
8d 76 00 f7 44 24 08 00 00 02 80 75 33 50 b8 00 e0 ff ff 21 e0 <8b> 40
10 8b 04 85 a0 f6 ab c0 8b 80 0c b0 b3 c0 f6 44 24 0d 02
EIP: [<c0407462>] xen_iret+0x12/0x2b SS:ESP 0069:eb8d1fe0
general protection fault: 0000 [#2]
---[ end trace ab0d29a492dcd330 ]---
Kernel panic - not syncing: Fatal exception
Pid: 1250, comm: r Tainted: G      D    ---------------
2.6.32-356.el6.i686 #1
Call Trace:
 [<c08476df>] ? panic+0x6e/0x122
 [<c084b63c>] ? oops_end+0xbc/0xd0
 [<c084b260>] ? do_general_protection+0x0/0x210
 [<c084a9b7>] ? error_code+0x73/
-------------

Petr says: "
 I've analysed the bug and I think that xen_iret() cannot cope with
 mangled DS, in this case zeroed out (null selector/descriptor) by either
 xen_failsafe_callback() or RESTORE_REGS because the corresponding LDT
 entry was invalidated by the reproducer. "

Jan took a look at the preliminary patch and came up a fix that solves
this problem:

"This code gets called after all registers other than those handled by
IRET got already restored, hence a null selector in %ds or a non-null
one that got loaded from a code or read-only data descriptor would
cause a kernel mode fault (with the potential of crashing the kernel
as a whole, if panic_on_oops is set)."

The way to fix this is to realize that the we can only relay on the
registers that IRET restores. The two that are guaranteed are the
%cs and %ss as they are always fixed GDT selectors. Also they are
inaccessible from user mode - so they cannot be altered. This is
the approach taken in this patch.

Another alternative option suggested by Jan would be to relay on
the subtle realization that using the %ebp or %esp relative references uses
the %ss segment.  In which case we could switch from using %eax to %ebp and
would not need the %ss over-rides. That would also require one extra
instruction to compensate for the one place where the register is used
as scaled index. However Andrew pointed out that is too subtle and if
further work was to be done in this code-path it could escape folks attention
and lead to accidents.

Reviewed-by: Petr Matousek <pmatouse@redhat.com>
Reported-by: Petr Matousek <pmatouse@redhat.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotg3: Fix crc errors on jumbo frame receive
Nithin Nayak Sujir [Mon, 14 Jan 2013 17:11:00 +0000 (17:11 +0000)]
tg3: Fix crc errors on jumbo frame receive

[ Upstream commit daf3ec688e057f6060fb9bb0819feac7a8bbf45c ]

TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy
auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting
in intermittent crc errors on jumbo frames with some link partners. Change
the code to do a read/modify/write.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode
Nithin Nayak Sujir [Mon, 14 Jan 2013 17:10:59 +0000 (17:10 +0000)]
tg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode

[ Upstream commit 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 ]

When netconsole is enabled, logging messages generated during tg3_open
can result in a null pointer dereference for the uninitialized tg3
status block. Use the irq_sync flag to disable polling in the early
stages. irq_sync is cleared when the driver is enabling interrupts after
all initialization is completed.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agobridge: Pull ip header into skb->data before looking into ip header.
Sarveshwar Bandi [Wed, 10 Oct 2012 01:15:01 +0000 (01:15 +0000)]
bridge: Pull ip header into skb->data before looking into ip header.

[ Upstream commit 6caab7b0544e83e6c160b5e80f5a4a7dd69545c7 ]

If lower layer driver leaves the ip header in the skb fragment, it needs to
be first pulled into skb->data before inspecting ip header length or ip version
number.

Signed-off-by: Sarveshwar Bandi <sarveshwar.bandi@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotcp: fix MSG_SENDPAGE_NOTLAST logic
Eric Dumazet [Sun, 6 Jan 2013 18:21:49 +0000 (18:21 +0000)]
tcp: fix MSG_SENDPAGE_NOTLAST logic

[ Upstream commit ae62ca7b03217be5e74759dc6d7698c95df498b3 ]

commit 35f9c09fe9c72e (tcp: tcp_sendpages() should call tcp_push() once)
added an internal flag : MSG_SENDPAGE_NOTLAST meant to be set on all
frags but the last one for a splice() call.

The condition used to set the flag in pipe_to_sendpage() relied on
splice() user passing the exact number of bytes present in the pipe,
or a smaller one.

But some programs pass an arbitrary high value, and the test fails.

The effect of this bug is a lack of tcp_push() at the end of a
splice(pipe -> socket) call, and possibly very slow or erratic TCP
sessions.

We should both test sd->total_len and fact that another fragment
is in the pipe (pipe->nrbufs > 1)

Many thanks to Willy for providing very clear bug report, bisection
and test programs.

Reported-by: Willy Tarreau <w@1wt.eu>
Bisected-by: Willy Tarreau <w@1wt.eu>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotcp: fix for zero packets_in_flight was too broad
Ilpo Järvinen [Mon, 4 Feb 2013 02:14:25 +0000 (02:14 +0000)]
tcp: fix for zero packets_in_flight was too broad

[ Upstream commit 6731d2095bd4aef18027c72ef845ab1087c3ba63 ]

There are transients during normal FRTO procedure during which
the packets_in_flight can go to zero between write_queue state
updates and firing the resulting segments out. As FRTO processing
occurs during that window the check must be more precise to
not match "spuriously" :-). More specificly, e.g., when
packets_in_flight is zero but FLAG_DATA_ACKED is true the problematic
branch that set cwnd into zero would not be taken and new segments
might be sent out later.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agotcp: frto should not set snd_cwnd to 0
Eric Dumazet [Sun, 3 Feb 2013 09:13:05 +0000 (09:13 +0000)]
tcp: frto should not set snd_cwnd to 0

[ Upstream commit 2e5f421211ff76c17130b4597bc06df4eeead24f ]

Commit 9dc274151a548 (tcp: fix ABC in tcp_slow_start())
uncovered a bug in FRTO code :
tcp_process_frto() is setting snd_cwnd to 0 if the number
of in flight packets is 0.

As Neal pointed out, if no packet is in flight we lost our
chance to disambiguate whether a loss timeout was spurious.

We should assume it was a proper loss.

Reported-by: Pasi Kärkkäinen <pasik@iki.fi>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonetback: correct netbk_tx_err to handle wrap around.
Ian Campbell [Wed, 6 Feb 2013 23:41:38 +0000 (23:41 +0000)]
netback: correct netbk_tx_err to handle wrap around.

[ Upstream commit b9149729ebdcfce63f853aa54a404c6a8f6ebbf3 ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoxen/netback: free already allocated memory on failure in xen_netbk_get_requests
Ian Campbell [Wed, 6 Feb 2013 23:41:37 +0000 (23:41 +0000)]
xen/netback: free already allocated memory on failure in xen_netbk_get_requests

[ Upstream commit 4cc7c1cb7b11b6f3515bd9075527576a1eecc4aa ]

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoxen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
Matthew Daley [Wed, 6 Feb 2013 23:41:36 +0000 (23:41 +0000)]
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.

[ Upstream commit 7d5145d8eb2b9791533ffe4dc003b129b9696c48 ]

Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoxen/netback: shutdown the ring if it contains garbage.
Ian Campbell [Wed, 6 Feb 2013 23:41:35 +0000 (23:41 +0000)]
xen/netback: shutdown the ring if it contains garbage.

[ Upstream commit 48856286b64e4b66ec62b94e504d0b29c1ade664 ]

A buggy or malicious frontend should not be able to confuse netback.
If we spot anything which is not as it should be then shutdown the
device and don't try to continue with the ring in a potentially
hostile state. Well behaved and non-hostile frontends will not be
penalised.

As well as making the existing checks for such errors fatal also add a
new check that ensures that there isn't an insane number of requests
on the ring (i.e. more than would fit in the ring). If the ring
contains garbage then previously is was possible to loop over this
insane number, getting an error each time and therefore not generating
any more pending requests and therefore not exiting the loop in
xen_netbk_tx_build_gops for an externded period.

Also turn various netdev_dbg calls which no precipitate a fatal error
into netdev_err, they are rate limited because the device is shutdown
afterwards.

This fixes at least one known DoS/softlockup of the backend domain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonet: sctp: sctp_endpoint_free: zero out secret key data
Daniel Borkmann [Fri, 8 Feb 2013 03:04:35 +0000 (03:04 +0000)]
net: sctp: sctp_endpoint_free: zero out secret key data

[ Upstream commit b5c37fe6e24eec194bb29d22fdd55d73bcc709bf ]

On sctp_endpoint_destroy, previously used sensitive keying material
should be zeroed out before the memory is returned, as we already do
with e.g. auth keys when released.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonet: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
Daniel Borkmann [Fri, 8 Feb 2013 03:04:34 +0000 (03:04 +0000)]
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree

[ Upstream commit 6ba542a291a5e558603ac51cda9bded347ce7627 ]

In sctp_setsockopt_auth_key, we create a temporary copy of the user
passed shared auth key for the endpoint or association and after
internal setup, we free it right away. Since it's sensitive data, we
should zero out the key before returning the memory back to the
allocator. Thus, use kzfree instead of kfree, just as we do in
sctp_auth_key_put().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agosctp: refactor sctp_outq_teardown to insure proper re-initalization
Neil Horman [Thu, 17 Jan 2013 11:15:08 +0000 (11:15 +0000)]
sctp: refactor sctp_outq_teardown to insure proper re-initalization

[ Upstream commit 2f94aabd9f6c925d77aecb3ff020f1cc12ed8f86 ]

Jamie Parsons reported a problem recently, in which the re-initalization of an
association (The duplicate init case), resulted in a loss of receive window
space.  He tracked down the root cause to sctp_outq_teardown, which discarded
all the data on an outq during a re-initalization of the corresponding
association, but never reset the outq->outstanding_data field to zero.  I wrote,
and he tested this fix, which does a proper full re-initalization of the outq,
fixing this problem, and hopefully future proofing us from simmilar issues down
the road.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Jamie Parsons <Jamie.Parsons@metaswitch.com>
Tested-by: Jamie Parsons <Jamie.Parsons@metaswitch.com>
CC: Jamie Parsons <Jamie.Parsons@metaswitch.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoatm/iphase: rename fregt_t -> ffreg_t
Heiko Carstens [Fri, 8 Feb 2013 00:19:11 +0000 (00:19 +0000)]
atm/iphase: rename fregt_t -> ffreg_t

[ Upstream commit ab54ee80aa7585f9666ff4dd665441d7ce41f1e8 ]

We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.

So simply rename the iphase typedef to a new name. Fixes this compile error:

In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
                 from next/arch/s390/include/asm/lowcore.h:12,
                 from next/arch/s390/include/asm/thread_info.h:30,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopacket: fix leakage of tx_ring memory
Phil Sutter [Fri, 1 Feb 2013 07:21:41 +0000 (07:21 +0000)]
packet: fix leakage of tx_ring memory

[ Upstream commit 9665d5d62487e8e7b1f546c00e11107155384b9a ]

When releasing a packet socket, the routine packet_set_ring() is reused
to free rings instead of allocating them. But when calling it for the
first time, it fills req->tp_block_nr with the value of rb->pg_vec_len
which in the second invocation makes it bail out since req->tp_block_nr
is greater zero but req->tp_block_size is zero.

This patch solves the problem by passing a zeroed auto-variable to
packet_set_ring() upon each invocation from packet_release().

As far as I can tell, this issue exists even since 69e3c75 (net: TX_RING
and packet mmap), i.e. the original inclusion of TX ring support into
af_packet, but applies only to sockets with both RX and TX ring
allocated, which is probably why this was unnoticed all the time.

Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
Cc: Johann Baudy <johann.baudy@gnu-log.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoipv6: do not create neighbor entries for local delivery
Marcelo Ricardo Leitner [Tue, 29 Jan 2013 22:26:08 +0000 (22:26 +0000)]
ipv6: do not create neighbor entries for local delivery

[ Upstream commit bd30e947207e2ea0ff2c08f5b4a03025ddce48d3 ]

They will be created at output, if ever needed. This avoids creating
empty neighbor entries when TPROXYing/Forwarding packets for addresses
that are not even directly reachable.

Note that IPv4 already handles it this way. No neighbor entries are
created for local input.

Tested by myself and customer.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agopktgen: correctly handle failures when adding a device
Cong Wang [Sun, 27 Jan 2013 21:14:08 +0000 (21:14 +0000)]
pktgen: correctly handle failures when adding a device

[ Upstream commit 604dfd6efc9b79bce432f2394791708d8e8f6efc ]

The return value of pktgen_add_device() is not checked, so
even if we fail to add some device, for example, non-exist one,
we still see "OK:...". This patch fixes it.

After this patch, I got:

# echo "add_device non-exist" > /proc/net/pktgen/kpktgend_0
-bash: echo: write error: No such device
# cat /proc/net/pktgen/kpktgend_0
Running:
Stopped:
Result: ERROR: can not add device non-exist
# echo "add_device eth0" > /proc/net/pktgen/kpktgend_0
# cat /proc/net/pktgen/kpktgend_0
Running:
Stopped: eth0
Result: OK: add_device=eth0

(Candidate for -stable)

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonet: loopback: fix a dst refcounting issue
Eric Dumazet [Fri, 25 Jan 2013 07:44:41 +0000 (07:44 +0000)]
net: loopback: fix a dst refcounting issue

[ Upstream commit 794ed393b707f01858f5ebe2ae5eabaf89d00022 ]

Ben Greear reported crashes in ip_rcv_finish() on a stress
test involving many macvlans.

We tracked the bug to a dst use after free. ip_rcv_finish()
was calling dst->input() and got garbage for dst->input value.

It appears the bug is in loopback driver, lacking
a skb_dst_force() before calling netif_rx().

As a result, a non refcounted dst, normally protected by a
RCU read_lock section, was escaping this section and could
be freed before the packet being processed.

  [<ffffffff813a3c4d>] loopback_xmit+0x64/0x83
  [<ffffffff81477364>] dev_hard_start_xmit+0x26c/0x35e
  [<ffffffff8147771a>] dev_queue_xmit+0x2c4/0x37c
  [<ffffffff81477456>] ? dev_hard_start_xmit+0x35e/0x35e
  [<ffffffff8148cfa6>] ? eth_header+0x28/0xb6
  [<ffffffff81480f09>] neigh_resolve_output+0x176/0x1a7
  [<ffffffff814ad835>] ip_finish_output2+0x297/0x30d
  [<ffffffff814ad6d5>] ? ip_finish_output2+0x137/0x30d
  [<ffffffff814ad90e>] ip_finish_output+0x63/0x68
  [<ffffffff814ae412>] ip_output+0x61/0x67
  [<ffffffff814ab904>] dst_output+0x17/0x1b
  [<ffffffff814adb6d>] ip_local_out+0x1e/0x23
  [<ffffffff814ae1c4>] ip_queue_xmit+0x315/0x353
  [<ffffffff814adeaf>] ? ip_send_unicast_reply+0x2cc/0x2cc
  [<ffffffff814c018f>] tcp_transmit_skb+0x7ca/0x80b
  [<ffffffff814c3571>] tcp_connect+0x53c/0x587
  [<ffffffff810c2f0c>] ? getnstimeofday+0x44/0x7d
  [<ffffffff810c2f56>] ? ktime_get_real+0x11/0x3e
  [<ffffffff814c6f9b>] tcp_v4_connect+0x3c2/0x431
  [<ffffffff814d6913>] __inet_stream_connect+0x84/0x287
  [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49
  [<ffffffff8108d695>] ? _local_bh_enable_ip+0x84/0x9f
  [<ffffffff8108d6c8>] ? local_bh_enable+0xd/0x11
  [<ffffffff8146763c>] ? lock_sock_nested+0x6e/0x79
  [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49
  [<ffffffff814d6b49>] inet_stream_connect+0x33/0x49
  [<ffffffff814632c6>] sys_connect+0x75/0x98

This bug was introduced in linux-2.6.35, in commit
7fee226ad2397b (net: add a noref bit on skb dst)

skb_dst_force() is enforced in dev_queue_xmit() for devices having a
qdisc.

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agor8169: remove the obsolete and incorrect AMD workaround
Timo Teräs [Mon, 21 Jan 2013 22:30:35 +0000 (22:30 +0000)]
r8169: remove the obsolete and incorrect AMD workaround

[ Upstream commit 5d0feaff230c0abfe4a112e6f09f096ed99e0b2d ]

This was introduced in commit 6dccd16 "r8169: merge with version
6.001.00 of Realtek's r8169 driver". I did not find the version
6.001.00 online, but in 6.002.00 or any later r8169 from Realtek
this hunk is no longer present.

Also commit 05af214 "r8169: fix Ethernet Hangup for RTL8110SC
rev d" claims to have fixed this issue otherwise.

The magic compare mask of 0xfffe000 is dubious as it masks
parts of the Reserved part, and parts of the VLAN tag. But this
does not make much sense as the VLAN tag parts are perfectly
valid there. In matter of fact this seems to be triggered with
any VLAN tagged packet as RxVlanTag bit is matched. I would
suspect 0xfffe0000 was intended to test reserved part only.

Finally, this hunk is evil as it can cause more packets to be
handled than what was NAPI quota causing net/core/dev.c:
net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and
mess up the NAPI state causing device to hang.

As result, any system using VLANs and having high receive
traffic (so that NAPI poll budget limits rtl_rx) would result
in device hang.

Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonetxen: fix off by one bug in netxen_release_tx_buffer()
Eric Dumazet [Tue, 22 Jan 2013 06:33:05 +0000 (06:33 +0000)]
netxen: fix off by one bug in netxen_release_tx_buffer()

[ Upstream commit a05948f296ce103989b28a2606e47d2e287c3c89 ]

Christoph Paasch found netxen could trigger a BUG in its dismantle
phase, in netxen_release_tx_buffer(), using full size TSO packets.

cmd_buf->frag_count includes the skb->data part, so the loop must
start at index 1 instead of 0, or else we can make an out
of bound access to cmd_buff->frag_array[MAX_SKB_FRAGS + 2]

Christoph provided the fixes in netxen_map_tx_skb() function.
In case of a dma mapping error, its better to clear the dma fields
so that we don't try to unmap them again in netxen_release_tx_buffer()

Reported-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Cc: Sony Chacko <sony.chacko@qlogic.com>
Cc: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoisdn/gigaset: fix zero size border case in debug dump
Tilman Schmidt [Mon, 21 Jan 2013 11:57:21 +0000 (11:57 +0000)]
isdn/gigaset: fix zero size border case in debug dump

[ Upstream commit d721a1752ba544df8d7d36959038b26bc92bdf80 ]

If subtracting 12 from l leaves zero we'd do a zero size allocation,
leading to an oops later when we try to set the NUL terminator.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoipv6: fix header length calculation in ip6_append_data()
Romain KUNTZ [Wed, 16 Jan 2013 12:47:40 +0000 (12:47 +0000)]
ipv6: fix header length calculation in ip6_append_data()

[ Upstream commit 7efdba5bd9a2f3e2059beeb45c9fa55eefe1bced ]

Commit 299b0767 (ipv6: Fix IPsec slowpath fragmentation problem)
has introduced a error in the header length calculation that
provokes corrupted packets when non-fragmentable extensions
headers (Destination Option or Routing Header Type 2) are used.

rt->rt6i_nfheader_len is the length of the non-fragmentable
extension header, and it should be substracted to
rt->dst.header_len, and not to exthdrlen, as it was done before
commit 299b0767.

This patch reverts to the original and correct behavior. It has
been successfully tested with and without IPsec on packets
that include non-fragmentable extensions headers.

Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoMAINTAINERS: Stephen Hemminger email change
Stephen Hemminger [Wed, 16 Jan 2013 17:55:57 +0000 (09:55 -0800)]
MAINTAINERS: Stephen Hemminger email change

[ Upstream commit adbbf69d1a54abf424e91875746a610dcc80017d ]

I changed my email because the vyatta.com mail server is now
redirected to brocade.com; and the Brocade mail system
is not friendly to Linux desktop users.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoipv6: fix the noflags test in addrconf_get_prefix_route
Romain Kuntz [Wed, 9 Jan 2013 14:02:26 +0000 (15:02 +0100)]
ipv6: fix the noflags test in addrconf_get_prefix_route

[ Upstream commit 85da53bf1c336bb07ac038fb951403ab0478d2c5 ]

The tests on the flags in addrconf_get_prefix_route() does no make
much sense: the 'noflags' parameter contains the set of flags that
must not match with the route flags, so the test must be done
against 'noflags', and not against 'flags'.

Signed-off-by: Romain Kuntz <r.kuntz@ipflavors.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonet: prevent setting ttl=0 via IP_TTL
Cong Wang [Mon, 7 Jan 2013 21:17:00 +0000 (21:17 +0000)]
net: prevent setting ttl=0 via IP_TTL

[ Upstream commit c9be4a5c49cf51cc70a993f004c5bb30067a65ce ]

A regression is introduced by the following commit:

commit 4d52cfbef6266092d535237ba5a4b981458ab171
Author: Eric Dumazet <eric.dumazet@gmail.com>
Date:   Tue Jun 2 00:42:16 2009 -0700

    net: ipv4/ip_sockglue.c cleanups

    Pure cleanups

but it is not a pure cleanup...

-               if (val != -1 && (val < 1 || val>255))
+               if (val != -1 && (val < 0 || val > 255))

Since there is no reason provided to allow ttl=0, change it back.

Reported-by: nitin padalia <padalia.nitin@gmail.com>
Cc: nitin padalia <padalia.nitin@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agokernel/resource.c: fix stack overflow in __reserve_region_with_split()
T Makphaibulchoke [Fri, 5 Oct 2012 00:16:55 +0000 (17:16 -0700)]
kernel/resource.c: fix stack overflow in __reserve_region_with_split()

commit 4965f5667f36a95b41cda6638875bc992bd7d18b upstream.

Using a recursive call add a non-conflicting region in
__reserve_region_with_split() could result in a stack overflow in the case
that the recursive calls are too deep.  Convert the recursive calls to an
iterative loop to avoid the problem.

Tested on a machine containing 135 regions.  The kernel no longer panicked
with stack overflow.

Also tested with code arbitrarily adding regions with no conflict,
embedding two consecutive conflicts and embedding two non-consecutive
conflicts.

Signed-off-by: T Makphaibulchoke <tmac@hp.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@gmail.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoHID: usbhid: quirk for Formosa IR receiver
Nicholas Santos [Sat, 29 Dec 2012 03:07:02 +0000 (22:07 -0500)]
HID: usbhid: quirk for Formosa IR receiver

commit 320cde19a4e8f122b19d2df7a5c00636e11ca3fb upstream.

Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver
[IR605A/Q] to hid-ids.h and hid-quirks.c.  This IR receiver causes about a 10
second timeout when the usbhid driver attempts to initialze the device.  Adding
this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the
delay.

Signed-off-by: Nicholas Santos <nicholas.santos@gmail.com>
[jkosina@suse.cz: fix ordering]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoBluetooth: Fix sending HCI commands after reset
Szymon Janc [Tue, 11 Dec 2012 07:51:19 +0000 (08:51 +0100)]
Bluetooth: Fix sending HCI commands after reset

commit dbccd791a3fbbdac12c33834b73beff3984988e9 upstream.

After sending reset command wait for its command complete event before
sending next command. Some chips sends CC event for command received
before reset if reset was send before chip replied with CC.

This is also required by specification that host shall not send
additional HCI commands before receiving CC for reset.

< HCI Command: Reset (0x03|0x0003) plen 0                              [hci0] 18.404612
> HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.405850
      Write Extended Inquiry Response (0x03|0x0052) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.406079
> HCI Event: Command Complete (0x0e) plen 4                            [hci0] 18.407864
      Reset (0x03|0x0003) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0      [hci0] 18.408062
> HCI Event: Command Complete (0x0e) plen 12                           [hci0] 18.408835

Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agowake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task
Oleg Nesterov [Mon, 21 Jan 2013 19:48:17 +0000 (20:48 +0100)]
wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task

commit 9067ac85d533651b98c2ff903182a20cbb361fcb upstream.

wake_up_process() should never wakeup a TASK_STOPPED/TRACED task.
Change it to use TASK_NORMAL and add the WARN_ON().

TASK_ALL has no other users, probably can be killed.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL
Oleg Nesterov [Mon, 21 Jan 2013 19:48:00 +0000 (20:48 +0100)]
ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL

commit 9899d11f654474d2d54ea52ceaa2a1f4db3abd68 upstream.

putreg() assumes that the tracee is not running and pt_regs_access() can
safely play with its stack.  However a killed tracee can return from
ptrace_stop() to the low-level asm code and do RESTORE_REST, this means
that debugger can actually read/modify the kernel stack until the tracee
does SAVE_REST again.

set_task_blockstep() can race with SIGKILL too and in some sense this
race is even worse, the very fact the tracee can be woken up breaks the
logic.

As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace()
call, this ensures that nobody can ever wakeup the tracee while the
debugger looks at it.  Not only this fixes the mentioned problems, we
can do some cleanups/simplifications in arch_ptrace() paths.

Probably ptrace_unfreeze_traced() needs more callers, for example it
makes sense to make the tracee killable for oom-killer before
access_process_vm().

While at it, add the comment into may_ptrace_stop() to explain why
ptrace_stop() still can't rely on SIGKILL and signal_pending_state().

Reported-by: Salman Qazi <sqazi@google.com>
Reported-by: Suleiman Souhlal <suleiman@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up()
Oleg Nesterov [Mon, 21 Jan 2013 19:47:41 +0000 (20:47 +0100)]
ptrace: introduce signal_wake_up_state() and ptrace_signal_wake_up()

commit 910ffdb18a6408e14febbb6e4b6840fd2c928c82 upstream.

Cleanup and preparation for the next change.

signal_wake_up(resume => true) is overused. None of ptrace/jctl callers
actually want to wakeup a TASK_WAKEKILL task, but they can't specify the
necessary mask.

Turn signal_wake_up() into signal_wake_up_state(state), reintroduce
signal_wake_up() as a trivial helper, and add ptrace_signal_wake_up()
which adds __TASK_TRACED.

This way ptrace_signal_wake_up() can work "inside" ptrace_request()
even if the tracee doesn't have the TASK_WAKEKILL bit set.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoptrace/x86: Partly fix set_task_blockstep()->update_debugctlmsr() logic
Oleg Nesterov [Sat, 11 Aug 2012 16:06:42 +0000 (18:06 +0200)]
ptrace/x86: Partly fix set_task_blockstep()->update_debugctlmsr() logic

commit 95cf00fa5d5e2a200a2c044c84bde8389a237e02 upstream.

Afaics the usage of update_debugctlmsr() and TIF_BLOCKSTEP in
step.c was always very wrong.

1. update_debugctlmsr() was simply unneeded. The child sleeps
   TASK_TRACED, __switch_to_xtra(next_p => child) should notice
   TIF_BLOCKSTEP and set/clear DEBUGCTLMSR_BTF after resume if
   needed.

2. It is wrong. The state of DEBUGCTLMSR_BTF bit in CPU register
   should always match the state of current's TIF_BLOCKSTEP bit.

3. Even get_debugctlmsr() + update_debugctlmsr() itself does not
   look right. Irq can change other bits in MSR_IA32_DEBUGCTLMSR
   register or the caller can be preempted in between.

4. It is not safe to play with TIF_BLOCKSTEP if task != current.
   DEBUGCTLMSR_BTF and TIF_BLOCKSTEP should always match each
   other if the task is running. The tracee is stopped but it
   can be SIGKILL'ed right before set/clear_tsk_thread_flag().

However, now that uprobes uses user_enable_single_step(current)
we can't simply remove update_debugctlmsr(). So this patch adds
the additional "task == current" check and disables irqs to avoid
the race with interrupts/preemption.

Unfortunately this patch doesn't solve the last problem, we need
another fix. Probably we should teach ptrace_stop() to set/clear
single/block stepping after resume.

And afaics there is yet another problem: perf can play with
MSR_IA32_DEBUGCTLMSR from nmi, this obviously means that even
__switch_to_xtra() has problems.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoptrace/x86: Introduce set_task_blockstep() helper
Oleg Nesterov [Fri, 3 Aug 2012 15:31:46 +0000 (17:31 +0200)]
ptrace/x86: Introduce set_task_blockstep() helper

commit 848e8f5f0ad3169560c516fff6471be65f76e69f upstream.

No functional changes, preparation for the next fix and for uprobes
single-step fixes.

Move the code playing with TIF_BLOCKSTEP/DEBUGCTLMSR_BTF into the
new helper, set_task_blockstep().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoahci: Add support for Enmotus Bobcat device.
Hugh Daschbach [Fri, 4 Jan 2013 22:39:09 +0000 (14:39 -0800)]
ahci: Add support for Enmotus Bobcat device.

commit 7f9c9f8e24590e7dcd26ca408458c43df5b83e61 upstream.

Silicon does not support standard AHCI BAR assignment.  Add
vendor/device exception to force BAR 2.

Signed-off-by: Hugh Daschbach <hugh.daschbach@enmotus.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoahci: support the STA2X11 I/O Hub
Alessandro Rubini [Fri, 6 Jan 2012 12:33:39 +0000 (13:33 +0100)]
ahci: support the STA2X11 I/O Hub

commit 318893e1429a9d50569a0379d1e20b0ecc45c555 upstream.

The AHCI controller found in the STA2X11 chip uses BAR number 0
instead of 5. Also, the chip's fixup code sets a special DMA mask
for all of its PCI functions, and the mask must be preserved here.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agogspca_kinect: add Kinect for Windows USB id
Jacob Schloss [Sun, 9 Dec 2012 23:18:25 +0000 (20:18 -0300)]
gspca_kinect: add Kinect for Windows USB id

commit 98fd485795db064d0885150e2c0c7f296d8fe06e upstream.

Add the USB ID for the Kinect for Windows RGB camera so it can be used
with the gspca_kinect driver.

Signed-off-by: Jacob Schloss <jacob.schloss@unlimitedautomata.com>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agort2800usb: Add support for 2001:3c1e (D-Link DWA-125 rev B1) USB Wi-Fi adapter
Maia Kozheva [Sun, 9 Dec 2012 09:07:40 +0000 (16:07 +0700)]
rt2800usb: Add support for 2001:3c1e (D-Link DWA-125 rev B1) USB Wi-Fi adapter

commit fd7b9270120ca7e53fbf0469febe0c68acf6a0a2 upstream.

D-Link DWA-125/B1 is a relatively new USB Wi-Fi adapter, using a
Ralink chipset supported by the rt2800usb driver. Currently, to work
around the problem (it's missing in all present kernel versions,
up to and including 3.7.x), I had to add this to /etc/rc.local:

echo 2001 3c1e >> /sys/bus/usb/drivers/rt2800usb/new_id

After that, the device works without problems. Been using it for over
a week with no bugs in sight.

The attached patch is trivial and simply adds the new USB ID to the
list of devices handled by rt2800usb.

Signed-off-by: Maia Kozheva <sikon@ubuntu.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoWireless: rt2x00: Add device id for Sweex LW323 to rt2800usb.c
Jaume Delclòs [Fri, 2 Nov 2012 22:35:20 +0000 (23:35 +0100)]
Wireless: rt2x00: Add device id for Sweex LW323 to rt2800usb.c

commit 36f318bb124b231c01db6965a009f46d5731f012 upstream.

This patch adds detection for the Sweex LW323 USB wireless network card
in the rt2x00 driver (just one line in rt2800usb.c).
It applies to linux-3.7-rc3.

Signed-off-by: Jaume Delclòs <jaume@delclos.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agowireless: rt2x00: rt{2500,73}usb.c put back duplicate id
Xose Vazquez Perez [Sat, 14 Apr 2012 21:00:01 +0000 (23:00 +0200)]
wireless: rt2x00: rt{2500,73}usb.c put back duplicate id

commit 8f35f787b75e9b6435ea37dabcae2d40dc72d31c upstream.

put back 0x050d,0x7050 to rt73usb, same usb_id for two chips:

K7SF5D7050A ver 2xxx is rt2500
K7SF5D7050B ver 3xxx is rt73

<http://en-us-support.belkin.com/app/answers/detail/a_id/297/kw/K7SF5D7050>

Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agovirtio_console: Don't access uninitialized data.
Sjur Brændeland [Mon, 21 Jan 2013 23:20:26 +0000 (09:50 +1030)]
virtio_console: Don't access uninitialized data.

commit aded024a12b32fc1ed9a80639681daae2d07ec25 upstream.

Don't access uninitialized work-queue when removing device.
The work queue is initialized only if the device multi-queue.
So don't call cancel_work unless this is a multi-queue device.

This fixes the following panic:

Kernel panic - not syncing: BUG!
Call Trace:
62031b28:  [<6026085d>] panic+0x16b/0x2d3
62031b30:  [<6004ef5e>] flush_work+0x0/0x1d7
62031b60:  [<602606f2>] panic+0x0/0x2d3
62031b68:  [<600333b0>] memcpy+0x0/0x140
62031b80:  [<6002d58a>] unblock_signals+0x0/0x84
62031ba0:  [<602609c5>] printk+0x0/0xa0
62031bd8:  [<60264e51>] __mutex_unlock_slowpath+0x13d/0x148
62031c10:  [<6004ef5e>] flush_work+0x0/0x1d7
62031c18:  [<60050234>] try_to_grab_pending+0x0/0x17e
62031c38:  [<6004e984>] get_work_gcwq+0x71/0x8f
62031c48:  [<60050539>] __cancel_work_timer+0x5b/0x115
62031c78:  [<628acc85>] unplug_port+0x0/0x191 [virtio_console]
62031c98:  [<6005061c>] cancel_work_sync+0x12/0x14
62031ca8:  [<628ace96>] virtcons_remove+0x80/0x15c [virtio_console]
62031ce8:  [<628191de>] virtio_dev_remove+0x1e/0x7e [virtio]
62031d08:  [<601cf242>] __device_release_driver+0x75/0xe4
62031d28:  [<601cf2dd>] device_release_driver+0x2c/0x40
62031d48:  [<601ce0dd>] driver_unbind+0x7d/0xc6
62031d88:  [<601cd5d9>] drv_attr_store+0x27/0x29
62031d98:  [<60115f61>] sysfs_write_file+0x100/0x14d
62031df8:  [<600b737d>] vfs_write+0xcb/0x184
62031e08:  [<600b58b8>] filp_close+0x88/0x94
62031e38:  [<600b7686>] sys_write+0x59/0x88
62031e88:  [<6001ced1>] handle_syscall+0x5d/0x80
62031ea8:  [<60030a74>] userspace+0x405/0x531
62031f08:  [<600d32cc>] sys_dup+0x0/0x5e
62031f28:  [<601b11d6>] strcpy+0x0/0x18
62031f38:  [<600be46c>] do_execve+0x10/0x12
62031f48:  [<600184c7>] run_init_process+0x43/0x45
62031fd8:  [<60019a91>] new_thread_handler+0xba/0xbc

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrivers/rtc/rtc-pl031.c: fix the missing operation on enable
Haojian Zhuang [Mon, 4 Feb 2013 22:28:54 +0000 (14:28 -0800)]
drivers/rtc/rtc-pl031.c: fix the missing operation on enable

commit e7e034e18a0ab6bafb2425c3242cac311164f4d6 upstream.

The RTC control register should be enabled in the process of
initializing.

Without this patch, I failed to enable RTC in Hisilicon Hi3620 SoC.  The
register mapping section in RTC is always read as zero.  So I doubt that
ST guys may already enable this register in bootloader.  So they won't
meet this issue.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler
Jan Luebbe [Mon, 4 Feb 2013 22:28:53 +0000 (14:28 -0800)]
drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler

commit 72fca4a4b32dc778b5b885c3498700e42b610d49 upstream.

Previously the alarm event was not propagated into the RTC subsystem.
By adding a call to rtc_update_irq, this fixes a timeout problem with
the hwclock utility.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agonilfs2: fix fix very long mount time issue
Vyacheslav Dubeyko [Mon, 4 Feb 2013 22:28:41 +0000 (14:28 -0800)]
nilfs2: fix fix very long mount time issue

commit a9bae189542e71f91e61a4428adf6e5a7dfe8063 upstream.

There exists a situation when GC can work in background alone without
any other filesystem activity during significant time.

The nilfs_clean_segments() method calls nilfs_segctor_construct() that
updates superblocks in the case of NILFS_SC_SUPER_ROOT and
THE_NILFS_DISCONTINUED flags are set.  But when GC is working alone the
nilfs_clean_segments() is called with unset THE_NILFS_DISCONTINUED flag.
As a result, the update of superblocks doesn't occurred all this time
and in the case of SPOR superblocks keep very old values of last super
root placement.

SYMPTOMS:

Trying to mount a NILFS2 volume after SPOR in such environment ends with
very long mounting time (it can achieve about several hours in some
cases).

REPRODUCING PATH:

1. It needs to use external USB HDD, disable automount and doesn't
   make any additional filesystem activity on the NILFS2 volume.

2. Generate temporary file with size about 100 - 500 GB (for example,
   dd if=/dev/zero of=<file_name> bs=1073741824 count=200).  The size of
   file defines duration of GC working.

3. Then it needs to delete file.

4. Start GC manually by means of command "nilfs-clean -p 0".  When you
   start GC by means of such way then, at the end, superblocks is updated
   by once.  So, for simulation of SPOR, it needs to wait sometime (15 -
   40 minutes) and simply switch off USB HDD manually.

5. Switch on USB HDD again and try to mount NILFS2 volume.  As a
   result, NILFS2 volume will mount during very long time.

REPRODUCIBILITY: 100%

FIX:

This patch adds checking that superblocks need to update and set
THE_NILFS_DISCONTINUED flag before nilfs_clean_segments() call.

Reported-by: Sergey Alexandrov <splavgm@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: storage: optimize to match the Huawei USB storage devices and support new switch...
fangxiaozhi [Mon, 4 Feb 2013 07:16:34 +0000 (15:16 +0800)]
USB: storage: optimize to match the Huawei USB storage devices and support new switch command

commit 200e0d994d9d1919b28c87f1a5fb99a8e13b8a0f upstream.

1. Optimize the match rules with new macro for Huawei USB storage devices,
   to avoid to load USB storage driver for the modem interface
   with Huawei devices.
2. Add to support new switch command for new Huawei USB dongles.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: storage: Define a new macro for USB storage match rules
fangxiaozhi [Mon, 4 Feb 2013 07:14:46 +0000 (15:14 +0800)]
USB: storage: Define a new macro for USB storage match rules

commit 07c7be3d87e5cdaf5f94c271c516456364ef286c upstream.

1. Define a new macro for USB storage match rules:
    matching with Vendor ID and interface descriptors.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: ftdi_sio: add Zolix FTDI PID
Petr Kubánek [Fri, 1 Feb 2013 16:24:04 +0000 (17:24 +0100)]
USB: ftdi_sio: add Zolix FTDI PID

commit 0ba3b2ccc72b3df5c305d61f59d93ab0f0e87991 upstream.

Add support for Zolix Omni 1509 monochromator custom USB-RS232 converter.

Signed-off-by: Petr Kubánek <petr@kubanek.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: option: add Changhong CH690
Bjørn Mork [Fri, 1 Feb 2013 11:06:51 +0000 (12:06 +0100)]
USB: option: add Changhong CH690

commit d4fa681541aa7bf8570d03426dd7ba663a71c467 upstream.

New device with 3 serial interfaces:

 If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend) Sub=ff Prot=ff
 If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff
 If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend) Sub=ff Prot=ff
 If#= 3 Alt= 0 #EPs= 2 Cls=08(stor) Sub=06 Prot=50

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
Sven Killig [Fri, 1 Feb 2013 22:43:06 +0000 (23:43 +0100)]
USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II

commit c249f911406efcc7456cb4af79396726bf7b8c57 upstream.

Add PID/VID entries for ELV WS 300 PC II weather station

Signed-off-by: Sven Killig <sven@killig.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agocan: c_can: Set reserved bit in IFx_MASK2 to 1 on write
Alexander Stein [Thu, 13 Dec 2012 09:06:10 +0000 (10:06 +0100)]
can: c_can: Set reserved bit in IFx_MASK2 to 1 on write

commit 2bd3bc4e8472424f1a6009825397639a8968920a upstream.

According to C_CAN documentation, the reserved bit in IFx_MASK2 register is
fixed 1.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrm/radeon: prevent crash in the ring space allocation
Alex Deucher [Wed, 30 Jan 2013 19:24:09 +0000 (14:24 -0500)]
drm/radeon: prevent crash in the ring space allocation

commit fd5d93a0015ce1a7db881382022b2fcdfdc61760 upstream.

If the requested number of DWs on the ring is larger than
the size of the ring itself, return an error.

In testing with large VM updates, we've seen crashes when we
try and allocate more space on the ring than the total size
of the ring without checking.

This prevents the crash but for large VM updates or bo moves
of very large buffers, we will need to break the transaction
down into multiple batches.  I have patches to use IBs for
the next kernel.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2: use rdev->cp.ring_size instead of ring->ring_size]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrm/radeon: Calling object_unrefer() when creating fb failure
liu chuansheng [Thu, 31 Jan 2013 14:13:00 +0000 (22:13 +0800)]
drm/radeon: Calling object_unrefer() when creating fb failure

commit f2d68cf4daa4de97d400d94836b907e35228e54f upstream.

When kzalloc() failed in radeon_user_framebuffer_create(), need to
call object_unreference() to match the object_reference().

Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Signed-off-by: xueminsu <xuemin.su@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoBluetooth: Fix handling of unexpected SMP PDUs
Johan Hedberg [Tue, 29 Jan 2013 16:44:23 +0000 (10:44 -0600)]
Bluetooth: Fix handling of unexpected SMP PDUs

commit 8cf9fa1240229cbdd888236c0c43fcbad680cf00 upstream.

The conn->smp_chan pointer can be NULL if SMP PDUs arrive at unexpected
moments. To avoid NULL pointer dereferences the code should be checking
for this and disconnect if an unexpected SMP PDU arrives. This patch
fixes the issue by adding a check for conn->smp_chan for all other PDUs
except pairing request and security request (which are are the first
PDUs to come to initialize the SMP context).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agox86-64: Replace left over sti/cli in ia32 audit exit code
Jan Beulich [Wed, 30 Jan 2013 07:55:53 +0000 (07:55 +0000)]
x86-64: Replace left over sti/cli in ia32 audit exit code

commit 40a1ef95da85843696fc3ebe5fce39b0db32669f upstream.

For some reason they didn't get replaced so far by their
paravirt equivalents, resulting in code to be run with
interrupts disabled that doesn't expect so (causing, in the
observed case, a BUG_ON() to trigger) when syscall auditing is
enabled.

David (Cc-ed) came up with an identical fix, so likely this can
be taken to count as an ack from him.

Reported-by: Peter Moody <pmoody@google.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/5108E01902000078000BA9C5@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Tested-by: Peter Moody <pmoody@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: EHCI: fix bug in scheduling periodic split transfers
Alan Stern [Wed, 30 Jan 2013 21:36:40 +0000 (16:36 -0500)]
USB: EHCI: fix bug in scheduling periodic split transfers

commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d upstream.

This patch (as1654) fixes a very old bug in ehci-hcd, connected with
scheduling of periodic split transfers.  The calculations for
full/low-speed bus usage are all carried out after the correction for
bit-stuffing has been applied, but the values in the max_tt_usecs
array assume it hasn't been.  The array should allow for allocation of
up to 90% of the bus capacity, which is 900 us, not 780 us.

The symptom caused by this bug is that any isochronous transfer to a
full-speed device with a maxpacket size larger than about 980 bytes is
always rejected with a -ENOSPC error.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agomwifiex: fix incomplete scan in case of IE parsing error
Bing Zhao [Tue, 29 Jan 2013 22:38:02 +0000 (14:38 -0800)]
mwifiex: fix incomplete scan in case of IE parsing error

commit 8a7d7cbf7b5ff9912ef50b3e94c9ad9f37b1c75f upstream.

A scan request is split into multiple scan commands queued in
scan_pending_q. Each scan command will be sent to firmware and
its response is handlded one after another.

If any error is detected while parsing IE in command response
buffer the remaining data will be ignored and error is returned.

We should check if there is any more scan commands pending in
the queue before returning error. This ensures that we will call
cfg80211_scan_done if this is the last scan command, or send
next scan command in scan_pending_q to firmware.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: option: add support for Telit LE920
Daniele Palmas [Mon, 28 Jan 2013 15:47:10 +0000 (16:47 +0100)]
USB: option: add support for Telit LE920

commit 03eb466f276ceef9dcf023dc5474db02af68aad9 upstream.

Add PID and special handling for Telit LE920

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: qcserial: add Telit Gobi QDL device
Daniele Palmas [Mon, 28 Jan 2013 15:48:54 +0000 (16:48 +0100)]
USB: qcserial: add Telit Gobi QDL device

commit 78796ae17eacedcdcaaeb03ba73d2e532a4c8f83 upstream.

Add VID and PID for Telit Gobi QDL device

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrm/radeon: add quirk for RV100 board
Alex Deucher [Tue, 29 Jan 2013 21:36:47 +0000 (16:36 -0500)]
drm/radeon: add quirk for RV100 board

commit 9200ee4941a6e5d1ec5df88982243686882dff3f upstream.

vbios says external TMDS while the board is actually
internal TMDS.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=60037

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agortlwifi: Fix the usage of the wrong variable in usb.c
Larry Finger [Sun, 27 Jan 2013 22:24:25 +0000 (16:24 -0600)]
rtlwifi: Fix the usage of the wrong variable in usb.c

commit 0a06ad8e3a1cb5311b7dbafde45410aa1bce9d40 upstream.

In routine _rtl_rx_pre_process(), skb_dequeue() is called to get an skb;
however, the wrong variable name is used in subsequent calls.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agosched/rt: Use root_domain of rt_rq not current processor
Shawn Bohrer [Mon, 14 Jan 2013 17:55:31 +0000 (11:55 -0600)]
sched/rt: Use root_domain of rt_rq not current processor

commit aa7f67304d1a03180f463258aa6f15a8b434e77d upstream.

When the system has multiple domains do_sched_rt_period_timer()
can run on any CPU and may iterate over all rt_rq in
cpu_online_mask.  This means when balance_runtime() is run for a
given rt_rq that rt_rq may be in a different rd than the current
processor.  Thus if we use smp_processor_id() to get rd in
do_balance_runtime() we may borrow runtime from a rt_rq that is
not part of our rd.

This changes do_balance_runtime to get the rd from the passed in
rt_rq ensuring that we borrow runtime only from the correct rd
for the given rt_rq.

This fixes a BUG at kernel/sched/rt.c:687! in __disable_runtime
when we try reclaim runtime lent to other rt_rq but runtime has
been lent to a rt_rq in another rd.

Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Mike Galbraith <bitbucket@online.de>
Cc: peterz@infradead.org
Link: http://lkml.kernel.org/r/1358186131-29494-1-git-send-email-sbohrer@rgmadvisors.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agousb: Prevent dead ports when xhci is not enabled
David Moore [Thu, 24 Jan 2013 06:19:49 +0000 (22:19 -0800)]
usb: Prevent dead ports when xhci is not enabled

commit 58b2939b4d5a030eaec469d29812ab8477ee7e76 upstream.

When the xHCI driver is not available, actively switch the ports to EHCI
mode since some BIOSes leave them in xHCI mode where they would
otherwise appear dead.  This was discovered on a  Dell Optiplex 7010,
but it's possible other systems could be affected.

This should be backported to kernels as old as 3.0, that contain the
commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: David Moore <david.moore@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoUSB: XHCI: fix memory leak of URB-private data
Alan Stern [Thu, 17 Jan 2013 15:32:16 +0000 (10:32 -0500)]
USB: XHCI: fix memory leak of URB-private data

commit 48c3375c5f69b1c2ef3d1051a0009cb9bce0ce24 upstream.

This patch (as1640) fixes a memory leak in xhci-hcd.  The urb_priv
data structure isn't always deallocated in the handle_tx_event()
routine for non-control transfers.  The patch adds a kfree() call so
that all paths end up freeing the memory properly.

This patch should be backported to kernels as old as 2.6.36, that
contain the commit 8e51adccd4c4b9ffcd509d7f2afce0a906139f75 "USB: xHCI:
Introduce urb_priv structure"

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-and-tested-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoxhci: Fix TD size for isochronous URBs.
Sarah Sharp [Fri, 11 Jan 2013 21:36:35 +0000 (13:36 -0800)]
xhci: Fix TD size for isochronous URBs.

commit f18f8ed2a9adc41c2d9294b85b6af115829d2af1 upstream.

To calculate the TD size for a particular TRB in an isoc TD, we need
know the endpoint's max packet size.  Isochronous endpoints also encode
the number of additional service opportunities in their wMaxPacketSize
field.  The TD size calculation did not mask off those bits before using
the field.  This resulted in incorrect TD size information for
isochronous TRBs when an URB frame buffer crossed a 64KB boundary.

For example:
 - an isoc endpoint has 2 additional service opportunites and
   a max packet size of 1020 bytes
 - a frame transfer buffer contains 3060 bytes
 - one frame buffer crosses a 64KB boundary, and must be split into
   one 1276 byte TRB, and one 1784 byte TRB.

The TD size is is the number of packets that remain to be transferred
for a TD after processing all the max packet sized packets in the
current TRB and all previous TRBs.

For this TD, the number of packets to be transferred is (3060 / 1020),
or 3.  The first TRB contains 1276 bytes, which means it contains one
full packet, and a 256 byte remainder.  After processing all the max
packet-sized packets in the first TRB, the host will have 2 packets left
to transfer.

The old code would calculate the TD size for the first TRB as:

total packet count = DIV_ROUND_UP (TD length / endpoint wMaxPacketSize)
total packet count - (first TRB length / endpoint wMaxPacketSize)

The math should have been:

total packet count = DIV_ROUND_UP (3060 / 1020) = 3
3 - (1276 / 1020) = 2

Since the old code didn't mask off the additional service interval bits
from the wMaxPacketSize field, the math ended up as

total packet count = DIV_ROUND_UP (3060 / 5116) = 1
1 - (1276 / 5116) = 1

Fix this by masking off the number of additional service opportunities
in the wMaxPacketSize field.

This patch should be backported to stable kernels as old as 3.0, that
contain the commit 4da6e6f247a2601ab9f1e63424e4d944ed4124f3 "xhci 1.0:
Update TD size field format."  It may not apply well to kernels older
than 3.2 because of commit 29cc88979a8818cd8c5019426e945aed118b400e
"USB: use usb_endpoint_maxp() instead of le16_to_cpu()".

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoxhci: Fix isoc TD encoding.
Sarah Sharp [Fri, 11 Jan 2013 19:19:07 +0000 (11:19 -0800)]
xhci: Fix isoc TD encoding.

commit 760973d2a74b93eb1697981f7448f0e62767cfc4 upstream.

An isochronous TD is comprised of one isochronous TRB chained to zero or
more normal TRBs.  Only the isoc TRB has the TBC and TLBPC fields.  The
normal TRBs must set those fields to zeroes.  The code was setting the
TBC and TLBPC fields for both isoc and normal TRBs.  Fix this.

This should be backported to stable kernels as old as 3.0, that contain
the commit b61d378f2da41c748aba6ca19d77e1e1c02bcea5 " xhci 1.0: Set
transfer burst last packet count field."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agodrm/i915: Fix misplaced intel_mark_page_flip_active()
Ben Hutchings [Thu, 7 Feb 2013 05:28:14 +0000 (05:28 +0000)]
drm/i915: Fix misplaced intel_mark_page_flip_active()

In commit 28c4566d30b8, backport of commit e7d841ca03b7 ('drm/i915:
Close race between processing unpin task and queueing the flip') I
somehow added two calls to intel_mark_page_flip_active() from
intel_gen4_queue_flip() and none from intel_gen6_queue_flip().  There
should of course be one from each.

Reported-by: Julien Cristau <jcristau@debian.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agoLinux 3.2.38 v3.2.38
Ben Hutchings [Wed, 6 Feb 2013 04:33:58 +0000 (04:33 +0000)]
Linux 3.2.38

8 years agoprintk: fix buffer overflow when calling log_prefix function from call_console_drivers
Alexandre SIMON [Fri, 1 Feb 2013 14:31:54 +0000 (15:31 +0100)]
printk: fix buffer overflow when calling log_prefix function from call_console_drivers

This patch corrects a buffer overflow in kernels from 3.0 to 3.4 when calling
log_prefix() function from call_console_drivers().

This bug existed in previous releases but has been revealed with commit
162a7e7500f9664636e649ba59defe541b7c2c60 (2.6.39 => 3.0) that made changes
about how to allocate memory for early printk buffer (use of memblock_alloc).
It disappears with commit 7ff9554bb578ba02166071d2d487b7fc7d860d62 (3.4 => 3.5)
that does a refactoring of printk buffer management.

In log_prefix(), the access to "p[0]", "p[1]", "p[2]" or
"simple_strtoul(&p[1], &endp, 10)" may cause a buffer overflow as this
function is called from call_console_drivers by passing "&LOG_BUF(cur_index)"
where the index must be masked to do not exceed the buffer's boundary.

The trick is to prepare in call_console_drivers() a buffer with the necessary
data (PRI field of syslog message) to be safely evaluated in log_prefix().

This patch can be applied to stable kernel branches 3.0.y, 3.2.y and 3.4.y.

Without this patch, one can freeze a server running this loop from shell :
  $ export DUMMY=`cat /dev/urandom | tr -dc '12345AZERTYUIOPQSDFGHJKLMWXCVBNazertyuiopqsdfghjklmwxcvbn' | head -c255`
  $ while true do ; echo $DUMMY > /dev/kmsg ; done

The "server freeze" depends on where memblock_alloc does allocate printk buffer :
if the buffer overflow is inside another kernel allocation the problem may not
be revealed, else the server may hangs up.

Signed-off-by: Alexandre SIMON <Alexandre.Simon@univ-lorraine.fr>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
8 years agox86, efi: Set runtime_version to the EFI spec revision
Matt Fleming [Fri, 25 Jan 2013 10:07:25 +0000 (10:07 +0000)]
x86, efi: Set runtime_version to the EFI spec revision

commit 712ba9e9afc4b3d3d6fa81565ca36fe518915c01 upstream.

efi.runtime_version is erroneously being set to the value of the
vendor's firmware revision instead of that of the implemented EFI
specification. We can't deduce which EFI functions are available based
on the revision of the vendor's firmware since the version scheme is
likely to be unique to each vendor.

What we really need to know is the revision of the implemented EFI
specification, which is available in the EFI System Table header.

Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>