Marcel Holtmann [Thu, 26 Jul 2007 07:12:25 +0000 (00:12 -0700)]
[IRDA]: Fix rfcomm use-after-free
Adrian Bunk wrote:
> Commit
8de0a15483b357d0f0b821330ec84d1660cadc4e added the following
> use-after-free in net/bluetooth/rfcomm/tty.c:
>
> <-- snip -->
>
> ...
> static int rfcomm_dev_add(struct rfcomm_dev_req *req, struct rfcomm_dlc *dlc)
> {
> ...
> if (IS_ERR(dev->tty_dev)) {
> list_del(&dev->list);
> kfree(dev);
> return PTR_ERR(dev->tty_dev);
> }
> ...
>
> <-- snip -->
>
> Spotted by the Coverity checker.
really good catch. I fully overlooked that one. The attached patch
should fix it.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Arlott [Thu, 26 Jul 2007 07:09:55 +0000 (00:09 -0700)]
[IPV6]: Don't update ADVMSS on routes where the MTU is not also updated
The ADVMSS value was incorrectly updated for ALL routes when the MTU
is updated because it's outside the effect of the if statement's
condition.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 26 Jul 2007 07:05:53 +0000 (00:05 -0700)]
[NET_DMA]: remove unused dma_memcpy_to_kernel_iovec
Al Viro pointed out that dma_memcpy_to_kernel_iovec() really was
unreachable and thus unused. The code originally was there to support
in-kernel dma needs, but since it remains unused, we'll pull it out.
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal [Thu, 26 Jul 2007 07:05:07 +0000 (00:05 -0700)]
[TIPC]: fix tipc_link_create error handling
if printbuf allocation or tipc_node_attach_link() fails, invalid
references to the link are left in the associated node and bearer
structures.
Fix by allocating printbuf early and moving timer initialization
and the addition of the new link to the b_ptr->links list after
tipc_node_attach_link() succeeded.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Thu, 26 Jul 2007 07:03:29 +0000 (00:03 -0700)]
[NET]: kernel-doc fixes
Fix kernel-doc omissions in net/:
Warning(linux-2.6.23-rc1//net/core/dev.c:2728): No description found for parameter 'addr'
Warning(linux-2.6.23-rc1//net/core/dev.c:2752): No description found for parameter 'addr'
Warning(linux-2.6.23-rc1//net/core/dev.c:3839): No description found for parameter 'net_dma'
Warning(linux-2.6.23-rc1//net/core/dev.c:3877): No description found for parameter 'state'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 26 Jul 2007 06:50:28 +0000 (23:50 -0700)]
[TCP]: htcp - use measured rtt
Change HTCP to use measured RTT rather than smooth RTT.
Srtt is computed using the TCP receive timestamp
options, so it is vulnerable to hostile receivers. To avoid any problems
this might cause use the measured RTT instead.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 26 Jul 2007 06:50:06 +0000 (23:50 -0700)]
[TCP]: cubic - eliminate use of receive time stamp
Remove use of received timestamp option value from RTT calculation in Cubic.
A hostile receiver may be returning a larger timestamp option than the original
value. This would cause the sender to believe the malevolent receiver had
a larger RTT and because Cubic tries to provide some RTT friendliness, the
sender would then favor the liar.
Instead, use the jiffie resolutionRTT value already computed and
passed back after ack.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 26 Jul 2007 06:49:34 +0000 (23:49 -0700)]
[TCP]: congestion control API pass RTT in microseconds
This patch changes the API for the callback that is done after an ACK is
received. It solves a couple of issues:
* Some congestion controls want higher resolution value of RTT
(controlled by TCP_CONG_RTT_SAMPLE flag). These don't really want a ktime, but
all compute a RTT in microseconds.
* Other congestion control could use RTT at jiffies resolution.
To keep API consistent the units should be the same for both cases, just the
resolution should change.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 31 Jul 2007 04:54:37 +0000 (21:54 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6.23
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
sh: Fix fs.h removal from mm.h regressions.
sh: fix get_wchan() for SH kernels without framepointers
sh: arch/sh/boot - fix shell usage
rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.
sh: remove support for sh7300 and solution engine 7300
sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies.
sh: Kill off virt_to_bus()/bus_to_virt().
sh: sh-sci - fix SH7708 support
sh: Restrict DSP support to specific CPUs.
sh: Silence sq compile warning on sh4 nommu.
sh: Kill the rest of the SE73180 cruft.
sh: remove support for sh73180 and solution engine 73180
sh: remove old broken pint code
sh: Reclaim beginning of P3 space for vmalloc area.
sh: Fix Dreamcast DMA issues.
sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
Linus Torvalds [Tue, 31 Jul 2007 04:54:16 +0000 (21:54 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh64-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
sh64: Kill off virt_to_bus()/bus_to_virt().
sh64: Fix irq_intc build failure.
sh64: Fix fs.h removal from mm.h regressions.
Paul Mundt [Tue, 31 Jul 2007 04:11:25 +0000 (13:11 +0900)]
sh64: Kill off virt_to_bus()/bus_to_virt().
Follows the SH change.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Tue, 31 Jul 2007 04:07:37 +0000 (13:07 +0900)]
sh64: Fix irq_intc build failure.
Needs interrupt.h:
CC arch/sh64/kernel/irq_intc.o
arch/sh64/kernel/irq_intc.c: In function 'make_intc_irq':
arch/sh64/kernel/irq_intc.c:179: error: implicit declaration of function 'disable_irq_nosync'
make[1]: *** [arch/sh64/kernel/irq_intc.o] Error 1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Tue, 31 Jul 2007 04:03:02 +0000 (13:03 +0900)]
sh64: Fix fs.h removal from mm.h regressions.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Tue, 31 Jul 2007 04:01:43 +0000 (13:01 +0900)]
sh: Fix fs.h removal from mm.h regressions.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Linus Torvalds [Mon, 30 Jul 2007 23:38:05 +0000 (16:38 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c
PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe
S2io: Increment received packet count correctly
S2io: Fix crash when resetting adapter
S2io: Mask spurious interrupts
S2IO: Implementing review comments from old patches
S2IO: Checking for the return value of pci map function
S2IO: Removing MSI support from driver
S2IO: Removing 3 buffer mode support from the driver
netxen: drop redudant spinlock
netxen: Fix interrupt handling for multiport adapters
netxen: re-init station address after h/w init
tulip: Remove tulip maintainer
forcedeth: mac address correct
gfar: Fix modpost warning
lib8390: comment on locking by Alan Cox
Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c
Linus Torvalds [Mon, 30 Jul 2007 23:36:33 +0000 (16:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/ipath: Workaround problem of errormask register being overwritten
IB/ipath: Fix some issues with buffer cancel and sendctrl register update
IB/ipath: Use faster put_tid_2 routine after initialization
IB/ipath: Remove unsafe fastrcvint code from interrupt handler
IB/ehca: Move extern declarations from .c files to .h files
IB/mlx4: Whitespace fix
IB/ehca: Fix include order to better match kernel style
mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow
RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structure
Linus Torvalds [Mon, 30 Jul 2007 23:35:35 +0000 (16:35 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
modules: better error messages when modules fail to load due to a sysfs problem.
kobject: update documentation
kset: kernel-doc cleanups
driver core: revert "device" link creation check
stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface
Fix Doc/sysfs-rules typos
kernel-doc fixes for PCI and drivers/base/
kobject: put kobject_actions in kobject.h
kobject: fix link error when CONFIG_HOTPLUG is disabled
HOWTO: sync Japanese HOWTO
HOWTO: adjust translation header of Japanese stable_api_nonsense.txt
Linus Torvalds [Mon, 30 Jul 2007 23:34:00 +0000 (16:34 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: "sparse" cleanups for usb gadgets
usb-serial: Fix edgeport regression on non-EPiC devices
USB: more pxa2xx_udc dead code removal
USB: NIKON D50 is an unusual device
USB: drivers/usb/serial/sierra.c: make 3 functions static
USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0
USB: mct_u232: Convert to proper speed handling API
digi_acceleport: Drag the driver kicking and screaming into coding style
cp2101: Remove broken termios optimisation, use proper speed API
USB: Fix a bug in usb_start_wait_urb
USB: fix scatterlist PIO case (IOMMU)
USB: fix usb_serial_suspend(): buggy code
USB: yet another quirky device
USB: Add CanonScan LiDE30 to the quirk list
USB: even more quirks
USB: usb.h kernel-doc additions
USB: more quirky devices
USB: Don't let usb-storage steal Blackberry Pearl
USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig
Greg Kroah-Hartman [Mon, 30 Jul 2007 18:26:38 +0000 (11:26 -0700)]
modules: better error messages when modules fail to load due to a sysfs problem.
This helps people when debugging problems like the ones that were in the
recent -mm releases.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cornelia Huck [Fri, 27 Jul 2007 11:41:10 +0000 (13:41 +0200)]
kobject: update documentation
Update kobject documentation:
- Update structure definitions.
- Remove documentation of removed struct subsystem.
(First shot, uevent_ops probably need some documentation as well.)
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Fri, 27 Jul 2007 16:36:26 +0000 (09:36 -0700)]
kset: kernel-doc cleanups
Removed kernel-doc marker (/**) from struct kset -- each struct member
still needs annotation.
Corrected one parameter name so that kernel-doc matches the macro.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cornelia Huck [Wed, 25 Jul 2007 07:58:08 +0000 (09:58 +0200)]
driver core: revert "device" link creation check
driver core: revert "device" link creation check
Commit
2ee97caf0a6602f749ddbfdb1449e383e1212707 introduced an extra
check on when to create the "device" symlink. Unfortunately, this
breaks input, so let's revert to the old behaviour.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Juan Lang [Tue, 24 Jul 2007 20:24:19 +0000 (13:24 -0700)]
stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Tue, 24 Jul 2007 04:05:02 +0000 (21:05 -0700)]
Fix Doc/sysfs-rules typos
Fix typos only (spelling, grammar, duplicate words, etc.).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Tue, 24 Jul 2007 04:42:11 +0000 (21:42 -0700)]
kernel-doc fixes for PCI and drivers/base/
Fix undocumented function parameters in PCI and drivers/base.
Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq'
Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Tue, 9 Apr 2002 19:14:34 +0000 (12:14 -0700)]
kobject: put kobject_actions in kobject.h
This prevents the extern declaration in the driver core.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cornelia Huck [Fri, 20 Jul 2007 11:58:13 +0000 (13:58 +0200)]
kobject: fix link error when CONFIG_HOTPLUG is disabled
Leaving kobject_actions[] in kobject_uevent.c, but putting it outside
the #ifdef looks indeed like the best solution to me. This way, we
avoid adding #ifdef CONFIG_HOTPLUG into core.c, when all other
functions called do not need such a thing.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tsugikazu Shibata [Thu, 19 Jul 2007 02:24:54 +0000 (11:24 +0900)]
HOWTO: sync Japanese HOWTO
Signed-off-by: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IKEDA, Munehiro [Thu, 19 Jul 2007 02:36:56 +0000 (11:36 +0900)]
HOWTO: adjust translation header of Japanese stable_api_nonsense.txt
Signed-off-by: IKEDA, Munehiro <m-ikeda@ds.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Mon, 30 Jul 2007 19:31:07 +0000 (12:31 -0700)]
USB: "sparse" cleanups for usb gadgets
This removes complaints about the gadget stack which are generated by
the currrent "sparse": it doesn't like the fact that zero is the null
pointer. (Last I checked, C guarantees that's correct ...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adam Kropelin [Sun, 29 Jul 2007 15:03:29 +0000 (11:03 -0400)]
usb-serial: Fix edgeport regression on non-EPiC devices
Fix serious regression on non-EPiC edgeport usb-serial devices. Baud
rate and MCR/LCR registers are not being written on these models due
to apparent copy-n-paste errors introduced with EPiC support.
Failure reported by Nick Pasich <Nick@NickAndBarb.net>.
Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sat, 21 Jul 2007 18:43:35 +0000 (11:43 -0700)]
USB: more pxa2xx_udc dead code removal
Remove some more dead code from the pxa2xx_udc driver: support
for a no-longer-undocumented hardware "test mode". Newer chips
made this the default, evidently as the best workaround for deep
silicon bugs. The interest was that this seemed to be the only
way to kick in the (documented!) double buffering capability.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Milinevsky Dmitry [Fri, 20 Jul 2007 23:58:53 +0000 (16:58 -0700)]
USB: NIKON D50 is an unusual device
This short patch allows NIKON D50 to be mounted as UMS[unusual device]
on Linux niam 2.6.22-rc7-cfs-v18 #2 PREEMPT Tue Jul 3 22:35:53 EEST
2007 i686 Intel(R) Celeron(R) M processor 1.50GHz GenuineIntel
GNU/Linux,
some previous kernels...
lsusb -v
Bus 001 Device 006: ID 04b0:0409 Nikon Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04b0 Nikon Corp.
idProduct 0x0409
bcdDevice 1.00
iManufacturer 1 NIKON
iProduct 2 NIKON DSC D50
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Signed-off-by: Milinevsky Dmitry <niam.niam@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <caglar@pardus.org.tr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adrian Bunk [Sun, 29 Jul 2007 14:59:02 +0000 (16:59 +0200)]
USB: drivers/usb/serial/sierra.c: make 3 functions static
This patch makes three needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Kevin Lloyd <linux@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Tue, 24 Jul 2007 13:13:42 +0000 (15:13 +0200)]
USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0
Clearly there's a bug in
drivers/usb/serial/usb-serial.c:usb_serial_put(). It shouldn't call
kref_put() while holding a spinlock.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Thu, 26 Jul 2007 18:01:10 +0000 (19:01 +0100)]
USB: mct_u232: Convert to proper speed handling API
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Thu, 26 Jul 2007 17:57:52 +0000 (18:57 +0100)]
digi_acceleport: Drag the driver kicking and screaming into coding style
- The outbreak of acute bracketitus has been cured
- The belief that brackets should have spaces everywhere likewise
- Various other coding style tweaks
- Use baud rates not Bfoo in the speed setup switch
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Thu, 26 Jul 2007 17:54:12 +0000 (18:54 +0100)]
cp2101: Remove broken termios optimisation, use proper speed API
I've also enabled the commented out support for 7200, 14400, 55854,
127117 and 3686400 baud as you can now set such rates in the kernel.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 24 Jul 2007 22:23:23 +0000 (18:23 -0400)]
USB: Fix a bug in usb_start_wait_urb
This patch (as941) fixes a bug recently added to the USB synchronous
API. The status of a completed URB must be preserved separately
across a completion callback. Also, the actual_length value isn't
available until after the URB has fully completed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 22 Jul 2007 22:13:13 +0000 (15:13 -0700)]
USB: fix scatterlist PIO case (IOMMU)
Update the scatterlist logic so that PIO options are also disabled
when an IOMMU may have coalesced pages during dma_map_sg() ... it's
not just HIGHMEM that can make trouble supporting both PIO and DMA
based host controller drivers.
There also seems to be a cross-arch issue here, with 64bit powerpc
not using an IOMMU define ... and its IOMMU_VMERGE config can always
be overridden on the kernel command line. So this is better, but
still imperfect.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Mon, 23 Jul 2007 06:58:39 +0000 (08:58 +0200)]
USB: fix usb_serial_suspend(): buggy code
Am Montag 23 Juli 2007 schrieb Adrian Bunk:
> Commit
ec22559e0b7a05283a3413bda5d177e42c950e23 added the following
> function to drivers/usb/serial/usb-serial.c:
>
[..]
>
> The Coverity checker spotted the inconsequent NULL checking for "serial".
>
> Looking at the code it also doesn't seem to have been intended to always
> return 0.
Coverity is right. The check for NULL is wrongly done and the error
return is lost.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Mon, 30 Jul 2007 10:09:59 +0000 (12:09 +0200)]
USB: yet another quirky device
another quirky scanner.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Johann Felix Soden [Sat, 28 Jul 2007 15:10:33 +0000 (17:10 +0200)]
USB: Add CanonScan LiDE30 to the quirk list
This patch adds CanoScan N1240U/LiDE30 (Scanner) to the list of quirky USB
devices.
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Fri, 20 Jul 2007 09:34:53 +0000 (11:34 +0200)]
USB: even more quirks
The number of quirky devices seems to be large.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Thu, 19 Jul 2007 17:21:37 +0000 (10:21 -0700)]
USB: usb.h kernel-doc additions
Add kernel-doc entries in <linux/usb.h> for:
Warning(linux-2.6.22-git12//include/linux/usb.h:162): No description found for parameter 'intf_assoc'
Warning(linux-2.6.22-git12//include/linux/usb.h:268): No description found for parameter 'intf_assoc[USB_MAXIADS]'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Thu, 19 Jul 2007 11:00:15 +0000 (13:00 +0200)]
USB: more quirky devices
our list of devices which cannot be suspended keeps growing.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jeremy Katz [Thu, 19 Jul 2007 13:37:42 +0000 (09:37 -0400)]
USB: Don't let usb-storage steal Blackberry Pearl
The Blackberry Pearl can run in two modes; a usb-storage only mode
and a mode that allows access via mass storage and to its database.
The berry_charge module will set the device to dual mode and thus we
should ignore its native mode if that module is built
Signed-off-by: Jeremy Katz <katzj@redhat.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Juergen Beisert [Thu, 19 Jul 2007 15:02:59 +0000 (17:02 +0200)]
USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig
Trivial patch to build the IOWARRIOR when it is selected in Kconfig.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dave Olson [Fri, 20 Jul 2007 21:41:26 +0000 (14:41 -0700)]
IB/ipath: Workaround problem of errormask register being overwritten
On some system hardware, we are seeing moderately common cases of the
chip errormask register being overwritten due to a chip bug in iba6120
that is triggered by a vendor-specific PCIe broadcast message. This
patch merely checks periodically, and corrects it if needed (the
overwrite can cause us to not get error and hardware error
interrupts). Also, make dd->ipath_errormask the one, true canonical
source for kr_errormask, and remove references to ipath_ignorederrs as
it is currently unused.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dave Olson [Fri, 20 Jul 2007 21:23:37 +0000 (14:23 -0700)]
IB/ipath: Fix some issues with buffer cancel and sendctrl register update
There was confused use of INFINIPATH_S_PIOBUFAVAILUPD (value) and
IPATH_S_PIOBUFAVAILUPD (bit position). Also, some callers of
ipath_cancel_sends() need kr_sendctrl restored, and some want to do it
later.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dave Olson [Fri, 20 Jul 2007 20:34:02 +0000 (13:34 -0700)]
IB/ipath: Use faster put_tid_2 routine after initialization
At one time the ipath_minrev field was initialized prior to the
ipath_init_iba6120_funcs call, but that is no longer the case, so the
slower put_tid routine was always being used.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Dave Olson [Fri, 20 Jul 2007 19:50:55 +0000 (12:50 -0700)]
IB/ipath: Remove unsafe fastrcvint code from interrupt handler
The fastrcvint code's purpose was to avoid reading the interrupt
status if kernel packets were in the receive queue (to reduce
overhead). Because intstatus was not read, we could miss the error
interrupt bit indicating freeze mode, since it only delivers a single
interrupt, even if still pending after intclear is written.
This patch removes that unsafe optimization.
Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Micah Gruber [Tue, 24 Jul 2007 02:44:56 +0000 (10:44 +0800)]
Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c
This patch fixes a potential null dereference bug where we dereference
DEV before a null check. This patch simply moves the dereferencing after
the null check.
Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Komuro [Mon, 23 Jul 2007 12:36:06 +0000 (21:36 +0900)]
PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe
protect smc_start_xmit, smc_interrupt and media_check by spin_lock.
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ramkrishna Vepa [Thu, 26 Jul 2007 02:43:12 +0000 (19:43 -0700)]
S2io: Increment received packet count correctly
- Fix to increment the received packet count correctly.
(Resending; Removed HTML sections in the patch)
Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ramkrishna Vepa [Thu, 26 Jul 2007 02:40:33 +0000 (19:40 -0700)]
S2io: Fix crash when resetting adapter
- Removed the call to pci_set_power_state to reset the adapter as it was resulting
in system crash on some platforms.
(Resending; Removed HTML sections in the patch)
Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ramkrishna Vepa [Thu, 26 Jul 2007 02:35:09 +0000 (19:35 -0700)]
S2io: Mask spurious interrupts
- Mask single and double bit ETQ ecc errors to inhibit spurious interrupts.
(Resending; Removed HTML sections in the patch)
Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Veena Parat [Mon, 23 Jul 2007 06:39:43 +0000 (02:39 -0400)]
S2IO: Implementing review comments from old patches
- Incorporated Jeff Garzik's comments on coding standards
Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Veena Parat [Mon, 23 Jul 2007 06:37:14 +0000 (02:37 -0400)]
S2IO: Checking for the return value of pci map function
- Checking for the return value of pci map function
- Implemented Francois Romieu's comments on eliminating code duplication
using goto
- Implemented Francois Romieu's comments on using a temporary variable for
accessing statistics structure
Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Veena Parat [Mon, 23 Jul 2007 06:23:54 +0000 (02:23 -0400)]
S2IO: Removing MSI support from driver
- Removed MSI support from driver - unused feature
- Replaced request_mem_region with pci_request_regions
Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Veena Parat [Mon, 23 Jul 2007 06:20:51 +0000 (02:20 -0400)]
S2IO: Removing 3 buffer mode support from the driver
- Removed 3 buffer mode support from driver - unused feature
- Incorporated Jeff Garzik's comments on elimination of inline typecasting
- Code cleanup : Removed a few extra spaces
Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Dhananjay Phadke [Fri, 27 Jul 2007 17:42:11 +0000 (23:12 +0530)]
netxen: drop redudant spinlock
Some leftover code that makes use of adapter->lock in tx_timeout function,
which resets the interface under this lock. In close() when the workqueue
is flushed, prints the warning about sleeping with interrupts disabled
(when spinlock debug is enabled). The lock was required with private netxen
IOCTLs, which were removed a while ago.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
dhananjay@netxen.com [Wed, 25 Jul 2007 14:43:12 +0000 (20:13 +0530)]
netxen: Fix interrupt handling for multiport adapters
This patch fixes masking of interrupts on multiport adapters. Also disables
interrupts upon ifdown interface. The wrong mask could result in interrupt
flood after interface is down.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
dhananjay@netxen.com [Wed, 25 Jul 2007 14:43:11 +0000 (20:13 +0530)]
netxen: re-init station address after h/w init
This is a workaround for firmware bug with 2nd port of multiport adapter,
where MAC address is reset. Driver just needs to overwrite it with the
value read from PROM.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Valerie Henson [Mon, 30 Jul 2007 19:10:52 +0000 (13:10 -0600)]
tulip: Remove tulip maintainer
Remove Val Henson as tulip maintainer and let her roam free, FREE!
Signed-off-by: Val Henson <val@nmt.edu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Ayaz Abdulla [Fri, 27 Jul 2007 03:46:00 +0000 (23:46 -0400)]
forcedeth: mac address correct
In older chipsets, the mac address was stored in reversed order.
However, in newer chipsets, the mac address is in correct order. This
patch takes those newer chipsets into account and does not rely on a
special bit setup by BIOS'.
Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Kumar Gala [Thu, 26 Jul 2007 05:52:34 +0000 (00:52 -0500)]
gfar: Fix modpost warning
Fix the following modpost warning:
WARNING: vmlinux.o(.init.text+0x1aa6c): Section mismatch: reference to .exit.text:gfar_mdio_exit (between 'gfar_init' and 'gfar_mdio_init')
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jarek Poplawski [Thu, 26 Jul 2007 12:44:01 +0000 (14:44 +0200)]
lib8390: comment on locking by Alan Cox
Additional explanation of problems with locking by Alan Cox.
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Micah Gruber [Mon, 23 Jul 2007 08:05:52 +0000 (16:05 +0800)]
Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c
This patch fixes a potential null dereference bug where we dereference
pegasus before a null check. This patch simply moves the dereferencing
after the null check.
Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Linus Torvalds [Mon, 30 Jul 2007 19:39:15 +0000 (12:39 -0700)]
Merge branch 'to-linus' of git://git./linux/kernel/git/christoph/slab
* 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/slab:
slub: fix bug in slub debug support
slub: add lock debugging check
Linus Torvalds [Mon, 30 Jul 2007 19:38:57 +0000 (12:38 -0700)]
Merge branch 'master' of ssh:///linux/kernel/git/mchehab/v4l-dvb
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d static
V4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixes
V4L/DVB (5932): Af9005 fix tuner module unload
V4L/DVB (5920): ivtv: fix incorrect fw size report.
V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.
V4L/DVB (5917): ivtv: improve mailbox responsiveness.
V4L/DVB (5916): ivtv: fix pause/continue/play handling
V4L/DVB (5900): usbvision: fix bugs [sg]_register functions
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support
V4L/DVB (5893): DVB: fix includes of video.h when __KERNEL__ is undefined
V4L/DVB (5891): zr36067: Turn off raw capture properly
V4L/DVB (5890): zr36067: Add UYVY, RGB555X, RGB565X, and RGB32 formats
V4L/DVB (5888): zr36067: Driver was not returning correct image size
V4L/DVB (5887): zr36067: Fix poll() operation
V4L/DVB (5886): zr36067: Fix problem setting norms
Adrian Bunk [Sun, 29 Jul 2007 15:40:48 +0000 (12:40 -0300)]
V4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d static
The fcv1236d support patch was created before the "dvb: remove static
dependencies on dvb-pll" patch was applied, but the fcv1236d patch didn't
get merged until after the fact.
struct dvb_pll_fcv1236d can become static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Adrian Bunk [Fri, 27 Jul 2007 14:09:57 +0000 (11:09 -0300)]
V4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixes
This patch:
- adds a missing error check and
- removes an error check that could never be true
Both spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Luca Olivetti [Fri, 27 Jul 2007 13:27:47 +0000 (10:27 -0300)]
V4L/DVB (5932): Af9005 fix tuner module unload
This patch removes the useless tuner field and avoids a double free of
the tuner (either mt2060 or qt1010).
Signed-off-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sun, 22 Jul 2007 14:12:26 +0000 (11:12 -0300)]
V4L/DVB (5920): ivtv: fix incorrect fw size report.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sun, 22 Jul 2007 12:39:56 +0000 (09:39 -0300)]
V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.
While decoding (MPEG or YUV) is active or when VBI output is in use, then
do not clear the VBI output of the saa7127. Only after the last user is
gone can we clear it.
This fixes the case where playback was stopped, another channel was chosen
and playback was restarted, while /dev/vbi16 was used to set the WSS
(widescreen) setting. Without this fix the WSS was reset on every stop
instead of just keeping the last value.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sun, 22 Jul 2007 11:49:32 +0000 (08:49 -0300)]
V4L/DVB (5917): ivtv: improve mailbox responsiveness.
First try polling for the result of a mailbox command, then
switch to a test/sleep loop. Also reduce the sleep time from 10 ms
to 1 ms. Improves the responsiveness of the mailbox handling.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hans Verkuil [Sun, 22 Jul 2007 11:46:38 +0000 (08:46 -0300)]
V4L/DVB (5916): ivtv: fix pause/continue/play handling
Pausing a decoder followed by a Play command would do nothing. Fixed.
Pausing a decoder running at non-standard speed following by a Continue
would reset the speed to 100%. Fixed.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Mon, 23 Jul 2007 09:58:31 +0000 (06:58 -0300)]
V4L/DVB (5900): usbvision: fix bugs [sg]_register functions
s_register was assigning the return code to (unsigned)reg->val, rather than
errCode, which it what it would return. Except reg->val can't be < 0, so it
would never actually return an error.
g_register never actually put the value it read into reg->val.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Sun, 22 Jul 2007 00:26:40 +0000 (21:26 -0300)]
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support
Various gpio and mux settings for the Osprey 440 weren't correct. Fix them
and provide some documentation about how the gpios work.
The osprey eeprom routine wasn't run for the 440, add it. It was also crap,
re-written to be better.
Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample
rate is fixed at 32kHz, as the driver doesn't support different rates for
digital input mode, though the card can select the rate from 32, 44.1, or 48
kHz via gpio.
Setting the audio gain via ALSA isn't supported yet; a userspace tool that
programs the X9221 via i2c-dev must be used.
The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC
used, resulting in extremely garbled sound. That is fixed in a followup
patch.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Anssi Hannula [Fri, 20 Jul 2007 20:18:10 +0000 (17:18 -0300)]
V4L/DVB (5893): DVB: fix includes of video.h when __KERNEL__ is undefined
linux/dvb/video.h uses types __u32, __s32, etc., but does not include
any header defining those when __KERNEL__ is not defined.
Fix this by including asm/types.h when __KERNEL__ is not defined.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Tue, 17 Jul 2007 21:29:45 +0000 (18:29 -0300)]
V4L/DVB (5891): zr36067: Turn off raw capture properly
When raw capture was turned off, the current capturing frame (v4l_grab_frame)
wasn't reset to NO_GRAB_ACTIVE. If capture was turned back on, the driver
would think this frame was currently being captured, and wait for it to
complete before starting a new frame. The hardware on the other hand would
not be actively capturing a frame. The result was the driver would wait
forever for v4l_grab_frame to be captured.
Some calls to zr36057_set_memgrab(0) were missing spin-locks, which have been
added.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Tue, 17 Jul 2007 21:29:44 +0000 (18:29 -0300)]
V4L/DVB (5890): zr36067: Add UYVY, RGB555X, RGB565X, and RGB32 formats
Add support for the UYVY and the other big endian output formats. The
driver was naming formats based on the host endianess. This is different
that all the other drivers appear to work and not what software appears
to expect.
Use ARRAY_SIZE() to find the the size of the zoran_formats array.
Change the way the driver handles setting the video format register. Rather
than use some if and switch statements to set to register by looking at the
format id, the format list simply has a field with the proper bits to set.
Adds a bit of ifdef to make a driver without V4L1 support more possible.
Also create a macro for defining formats that handles vl41 and/or vl42
support to avoid repeated ifdefs in the format list.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Tue, 17 Jul 2007 21:29:43 +0000 (18:29 -0300)]
V4L/DVB (5888): zr36067: Driver was not returning correct image size
The driver was returning the size of the (fixed) buffer it allocated as the
sizeimage field in the v4l2 pixel format, rather than the actual size of the
image. For example, a 192x128 YUYV image is 49152 bytes but the driver would
always return 131072 bytes since if that was the size of the v4l buffer.
This violates the v4l2 spec, which says that sizeimage should be the actual
size of the image for uncompressed formats. It also caused mplayer to crash.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Tue, 17 Jul 2007 21:29:43 +0000 (18:29 -0300)]
V4L/DVB (5887): zr36067: Fix poll() operation
During uncompressed capture, the poll() function was looking the wrong frame.
It was using the frame the driver was going to capture into next (pend_tail),
when it should have been looking at the next frame to be de-queued with
DQBUF/SYNC (sync_tail).
It also wasn't looking in the right spot. It was looking at the file handle's
copy of the buffer status, rather than the driver core copy. The interrupt
routine marks frames as done in the driver core copy, the file handle copy
isn't updated. So even if poll() looked at the right frame, it would never
see it transition to done and return POLLIN.
The compressed capture code has this same problem, looking in fh->jpg_buffers
when it should have used zr->jpg_buffers.
There was some logic to detect when there was no current capture in process
nor any frames queued and try to return an error, which ends up being a bad
idea. It's possible to call select() from one thread while no capture is in
process, or no frames queued, and then start a capture or queue frames from
another thread.
The buffer state variables are protected by a spin lock, which the code wasn't
acquiring. That is fixed too.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Trent Piepho [Tue, 17 Jul 2007 21:29:42 +0000 (18:29 -0300)]
V4L/DVB (5886): zr36067: Fix problem setting norms
The zr36067 driver doesn't make a distinction between the different sub-types
of NTSC, PAL, or SECAM norms. For example, when the enum std ioctl returns
the PAL standard it returns PAL_BG|PAL_DK|PAL_H|PAL_I.
When setting the norm, it required the bitmask to match exactly the set of
norms used during the enumeration. If just one norm was specified, for
example PAL_BG or NTSC_M, it would fail. This violates the V4L2 spec,
"VIDIOC_S_STD accepts *one* or more flags..."
The key thing to realize is that V4L2_STD_PAL is not one bit, it is multiple
bits. It's ok to call S_STD with any *one* of those bits, but the driver was
requiring *all* of them.
This fixes the S_STD function so that it will accept any set of one or more
PAL norms as PAL, and the same for NTSC and SECAM.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Acked-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Alexey Dobriyan [Mon, 30 Jul 2007 19:08:46 +0000 (23:08 +0400)]
Fallout from "Remove fs.h from mm.h" patch
While I was busy compile-testing my patch, ENOSYS sneaked into pm.h
leading to some compile-breakages mostly on ia64 and some mips configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Thu, 26 Jul 2007 18:54:34 +0000 (20:54 +0200)]
slub: fix bug in slub debug support
We ClearSlabDebug() before the last SlabDebug() check. Clear it later.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Peter Zijlstra [Thu, 26 Jul 2007 18:01:38 +0000 (20:01 +0200)]
slub: add lock debugging check
Ingo noticed that the SLUB code does include the lock debugging free
check.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Linus Torvalds [Mon, 30 Jul 2007 18:06:55 +0000 (11:06 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Fix show_stack() when stack argument is NULL.
[SPARC]: Fix serial console node string creation.
[SPARC]: Mark SBUS framebuffer ioctls as IGNORE in compat_ioctl.c
[SPARC64]: asm-sparc64/floppy.h needs linux/pci.h
[SPARC64]: Fix conflicts in SBUS/PCI/EBUS/ISA DMA handling.
[VIDEO]: Fix OOPS in all SBUS framebuffer drivers.
[SPARC64]: Handle mostek clock type in mini_rtc driver.
[PARTITION]: Sun/Solaris VTOC table corrections
[SPARC]: Fix floppy on some sun4c systems.
[SPARC64]: Fix sun4u PCI config space accesses on sun4u.
[PARTITION] MSDOS: Fix Sun num_partitions handling.
[SPARC]: Update defconfig.
Stephen Rothwell [Mon, 30 Jul 2007 10:12:37 +0000 (20:12 +1000)]
APM support depends on CONFIG_PM_SLEEP
Commit
296699de6bdc717189a331ab6bbe90e05c94db06 broke building APM
support if CONFIG_PM_SLEEP is not set.
Reported by Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[ Simplified a bit as suggested by Rafael. -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hirokazu Takata [Mon, 30 Jul 2007 13:00:47 +0000 (22:00 +0900)]
m32r: build fix for removing fs.h from mm.h
This patch fixes the m32r build after the commit "Remove fs.h from mm.h"
was merged (commit
4e950f6f0189f65f8bf069cf2272649ef418f5e4).
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Cruse [Mon, 30 Jul 2007 06:29:29 +0000 (16:29 +1000)]
setup and detect 2nd phy on MCF5275 in FEC driver
Added code to recognize the second interface on M5275 boards.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Ungerer [Mon, 30 Jul 2007 06:29:16 +0000 (16:29 +1000)]
clean up reading of ICR register in FEC driver
On the MCF5272, there is no need to read the ICR before writing it :
the bit 4n+3 is a write-enable for the bits 4n,4n+1 and 4n+2.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Ungerer [Mon, 30 Jul 2007 06:29:09 +0000 (16:29 +1000)]
fix work queues in FEC driver
Fix the work queue code in the FEC driver.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Ungerer [Mon, 30 Jul 2007 06:28:57 +0000 (16:28 +1000)]
remove unused config symbol from FEC driver
Removed unused CONFIG symbol and its conditional code from FEC driver.
Pointed out by Robert P. J. Day <rpjday@mindspring.com>.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Ungerer [Mon, 30 Jul 2007 06:28:46 +0000 (16:28 +1000)]
include cacheflush.h in FEC driver
Include cacheflush.h to get definitions for cache functions used
in this code.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Mon, 30 Jul 2007 07:17:12 +0000 (00:17 -0700)]
[SPARC64]: Fix show_stack() when stack argument is NULL.
It didn't handle that case at all, and now dump_stack()
can be implemented directly as show_stack(current, NULL)
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 29 Jul 2007 09:10:37 +0000 (02:10 -0700)]
[SPARC]: Fix serial console node string creation.
The string setting code depends upon the original value of the
"skip" variable, not the one that gets modified by the node
traversal loop.
Based upon a patch by Mark Fortescue.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 29 Jul 2007 07:50:42 +0000 (00:50 -0700)]
[SPARC]: Mark SBUS framebuffer ioctls as IGNORE in compat_ioctl.c
They are handled in a ->compat_ioctl() handler, so it's just noise
when compat_ioctl.c warns which occurs when they are used on non-SBUS
framebuffer devices.
Signed-off-by: David S. Miller <davem@davemloft.net>
git.openpandora.org / pandora-kernel.git / log