[ARM] 4428/1: modify at91 includes to handle non-MMU at91x40 family

Modify the common at91 hardware support to deal with the non-MMU
at91x40 family. The base RAM (which is most likely not DRAM) is
set to the configured value. Virtual IO device mapping is set
to be 1 to 1 with the physical addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 46835e9..8f1cdd3 100644 (file)
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -26,18 +26,29 @@
 #include <asm/arch/at91sam9263.h>
 #elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <asm/arch/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91X40)
+#include <asm/arch/at91x40.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
 
 
+#ifdef CONFIG_MMU
 /*
  * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
  * to 0xFEF78000 .. 0xFF000000.  (544Kb)
  */
 #define AT91_IO_PHYS_BASE      0xFFF78000
-#define AT91_IO_SIZE           (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
 #define AT91_IO_VIRT_BASE      (0xFF000000 - AT91_IO_SIZE)
+#else
+/*
+ * Identity mapping for the non MMU case.
+ */
+#define AT91_IO_PHYS_BASE      AT91_BASE_SYS
+#define AT91_IO_VIRT_BASE      AT91_IO_PHYS_BASE
+#endif
+
+#define AT91_IO_SIZE           (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
 
  /* Convert a physical IO address to virtual IO address */
 #define AT91_IO_P2V(x)         ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
@@ -66,7 +77,11 @@
 #define AT91_CHIPSELECT_7      0x80000000
 
 /* SDRAM */
+#ifdef CONFIG_DRAM_BASE
+#define AT91_SDRAM_BASE                CONFIG_DRAM_BASE
+#else
 #define AT91_SDRAM_BASE                AT91_CHIPSELECT_1
+#endif
 
 /* Clocks */
 #define AT91_SLOW_CLOCK                32768           /* slow clock */