OMAP2/3 clock: convert omap2_clk_wait_ready() to use the idlest_bit field

Simplify omap2_clk_wait_ready() to use the new idlest_bit field in
struct clk, rather than the hunk of conditionals that were there
previously.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 990da5a..c3af24e 100644 (file)
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -296,100 +296,50 @@ int omap2_wait_clock_ready(s16 prcm_mod, u16 reg_index, u32 mask,
 
 
 /*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+ * omap2_clk_wait_ready - wait for a OMAP module to come out of target idle
+ * @clk: struct clk * recently enabled to indicate the module to test
  *
- * REVISIT: This code is ugly and does not belong here.
+ * Wait for an OMAP module with a target idle state bit to come out of
+ * idle once both its interface clock and primary functional clock are
+ * both enabled.  Any register read or write to the device before it
+ * returns from idle will cause an abort.  Not all modules have target
+ * idle state bits (for example, DSS and CAM on OMAP24xx); so we don't
+ * wait for those.  No return value.
+ *
+ * We don't need special code here for INVERT_ENABLE for the time
+ * being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL.
+ *
+ * REVISIT: This function is misnamed: it should be something like
+ * "omap2_module_wait_ready", and in the long-term, it does not belong
+ * in the clock framework. It also shouldn't be doing register
+ * arithmetic to determine the companion clock.
  */
 static void omap2_clk_wait_ready(struct clk *clk)
 {
        u16 other_reg, idlest_reg;
-       u32 other_bit, idlest_bit;
+       u32 other_bit;
 
-       /* Only CM-controlled clocks affect module IDLEST */
-       if (clk->prcm_mod & ~PRCM_MOD_ADDR_MASK)
+       if (!(clk->flags & WAIT_READY))
                return;
 
+       /* If we are enabling an iclk, also test the fclk; and vice versa */
+       other_bit = 1 << clk->enable_bit;
        other_reg = clk->enable_reg & ~PRCM_REGTYPE_MASK;
 
-       /* If we are enabling an iclk, also test the fclk; and vice versa */
        if (clk->enable_reg & CM_ICLKEN_REGTYPE)
                other_reg |= CM_FCLKEN_REGTYPE;
        else
                other_reg |= CM_ICLKEN_REGTYPE;
 
-       /* Covers most of the cases - a few exceptions are below */
-       other_bit = 1 << clk->enable_bit;
-       idlest_bit = other_bit;
-
-       /* 24xx: DSS and CAM have no idlest bits for their target agents */
-       if (cpu_is_omap24xx() && clk->prcm_mod == CORE_MOD &&
-           (clk->enable_reg == CM_FCLKEN1 || clk->enable_reg == CM_ICLKEN1)) {
-
-               if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
-                   clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
-                   clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
-                       return;
-
-       }
-
-       /* REVISIT: What are the appropriate exclusions for 34XX? */
-       if (cpu_is_omap34xx()) {
-
-               /* SSI */
-               if (clk->prcm_mod == CORE_MOD &&
-                   (clk->enable_reg == CM_FCLKEN1 ||
-                    clk->enable_reg == CM_ICLKEN1) &&
-                   clk->enable_bit == OMAP3430_EN_SSI_SHIFT) {
-
-                       if (system_rev == OMAP3430_REV_ES1_0)
-                               return;
-
-                       idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
-               }
-
-               /* DSS */
-               if (clk->prcm_mod == OMAP3430_DSS_MOD) {
-
-                       /* 3430ES1 DSS has no target idlest bits */
-                       if (system_rev == OMAP3430_REV_ES1_0)
-                               return;
-
-                       /*
-                        * For 3430ES2+ DSS, only wait once (dss1_alwon_fclk,
-                        * dss_l3_iclk, dss_l4_iclk) are enabled
-                        */
-                       if (clk->enable_bit != OMAP3430_EN_DSS1_SHIFT)
-                               return;
-
-                       idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
-               }
-
-               /* USBHOST */
-               if (system_rev > OMAP3430_REV_ES1_0 &&
-                   clk->prcm_mod == OMAP3430ES2_USBHOST_MOD) {
-
-                       /*
-                        * The 120MHz clock apparently has nothing to do with
-                        * USBHOST module accessibility
-                        */
-                       if (clk->enable_bit == OMAP3430ES2_EN_USBHOST2_SHIFT)
-                               return;
-
-                       idlest_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT;
-
-               }
-       }
-
-       /* Check if both functional and interface clocks are running. */
+       /* Ensure functional and interface clocks are running. */
        if (!(cm_read_mod_reg(clk->prcm_mod, other_reg) & other_bit))
                return;
 
        idlest_reg = other_reg & ~PRCM_REGTYPE_MASK;
        idlest_reg |= CM_IDLEST_REGTYPE;
 
-       omap2_wait_clock_ready(clk->prcm_mod, idlest_reg, idlest_bit,
+       omap2_wait_clock_ready(clk->prcm_mod, idlest_reg, 1 << clk->idlest_bit,
                               clk->name);
 }