staging: et131x: move et131x_adapter.h contents into et131x.c
authorMark Einon <mark.einon@gmail.com>
Thu, 20 Oct 2011 00:18:35 +0000 (01:18 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Sun, 23 Oct 2011 08:07:09 +0000 (10:07 +0200)
Move et131x_adapter.h contents into et131x.c and delete et131x_adapter.h

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/et131x/et131x.c
drivers/staging/et131x/et131x_adapter.h [deleted file]

index 271ae31..e88c277 100644 (file)
@@ -83,7 +83,6 @@
 #include <linux/random.h>
 #include <linux/phy.h>
 
-#include "et131x_adapter.h"
 #include "et1310_tx.h"
 #include "et1310_rx.h"
 #include "et131x.h"
@@ -125,6 +124,157 @@ MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver "
 #define INT_MASK_ENABLE             0xfffebf17
 #define INT_MASK_ENABLE_NO_FLOW     0xfffebfd7
 
+/* ADAPTER defines */
+/*
+ * Do not change these values: if changed, then change also in respective
+ * TXdma and Rxdma engines
+ */
+#define NUM_DESC_PER_RING_TX         512    /* TX Do not change these values */
+#define NUM_TCB                      64
+
+/*
+ * These values are all superseded by registry entries to facilitate tuning.
+ * Once the desired performance has been achieved, the optimal registry values
+ * should be re-populated to these #defines:
+ */
+#define NUM_TRAFFIC_CLASSES          1
+
+#define TX_ERROR_PERIOD             1000
+
+#define LO_MARK_PERCENT_FOR_PSR     15
+#define LO_MARK_PERCENT_FOR_RX      15
+
+/* RFD (Receive Frame Descriptor) */
+struct rfd {
+       struct list_head list_node;
+       struct sk_buff *skb;
+       u32 len;        /* total size of receive frame */
+       u16 bufferindex;
+       u8 ringindex;
+};
+
+/* Flow Control */
+#define FLOW_BOTH      0
+#define FLOW_TXONLY    1
+#define FLOW_RXONLY    2
+#define FLOW_NONE      3
+
+/* Struct to define some device statistics */
+struct ce_stats {
+       /* MIB II variables
+        *
+        * NOTE: atomic_t types are only guaranteed to store 24-bits; if we
+        * MUST have 32, then we'll need another way to perform atomic
+        * operations
+        */
+       u32             unicast_pkts_rcvd;
+       atomic_t        unicast_pkts_xmtd;
+       u32             multicast_pkts_rcvd;
+       atomic_t        multicast_pkts_xmtd;
+       u32             broadcast_pkts_rcvd;
+       atomic_t        broadcast_pkts_xmtd;
+       u32             rcvd_pkts_dropped;
+
+       /* Tx Statistics. */
+       u32             tx_underflows;
+
+       u32             tx_collisions;
+       u32             tx_excessive_collisions;
+       u32             tx_first_collisions;
+       u32             tx_late_collisions;
+       u32             tx_max_pkt_errs;
+       u32             tx_deferred;
+
+       /* Rx Statistics. */
+       u32             rx_overflows;
+
+       u32             rx_length_errs;
+       u32             rx_align_errs;
+       u32             rx_crc_errs;
+       u32             rx_code_violations;
+       u32             rx_other_errs;
+
+       u32             synchronous_iterations;
+       u32             interrupt_status;
+};
+
+/* The private adapter structure */
+struct et131x_adapter {
+       struct net_device *netdev;
+       struct pci_dev *pdev;
+       struct mii_bus *mii_bus;
+       struct phy_device *phydev;
+       struct work_struct task;
+
+       /* Flags that indicate current state of the adapter */
+       u32 flags;
+
+       /* local link state, to determine if a state change has occurred */
+       int link;
+
+       /* Configuration  */
+       u8 rom_addr[ETH_ALEN];
+       u8 addr[ETH_ALEN];
+       bool has_eeprom;
+       u8 eeprom_data[2];
+
+       /* Spinlocks */
+       spinlock_t lock;
+
+       spinlock_t tcb_send_qlock;
+       spinlock_t tcb_ready_qlock;
+       spinlock_t send_hw_lock;
+
+       spinlock_t rcv_lock;
+       spinlock_t rcv_pend_lock;
+       spinlock_t fbr_lock;
+
+       spinlock_t phy_lock;
+
+       /* Packet Filter and look ahead size */
+       u32 packet_filter;
+
+       /* multicast list */
+       u32 multicast_addr_count;
+       u8 multicast_list[NIC_MAX_MCAST_LIST][ETH_ALEN];
+
+       /* Pointer to the device's PCI register space */
+       struct address_map __iomem *regs;
+
+       /* Registry parameters */
+       u8 wanted_flow;         /* Flow we want for 802.3x flow control */
+       u32 registry_jumbo_packet;      /* Max supported ethernet packet size */
+
+       /* Derived from the registry: */
+       u8 flowcontrol;         /* flow control validated by the far-end */
+
+       /* Minimize init-time */
+       struct timer_list error_timer;
+
+       /* variable putting the phy into coma mode when boot up with no cable
+        * plugged in after 5 seconds
+        */
+       u8 boot_coma;
+
+       /* Next two used to save power information at power down. This
+        * information will be used during power up to set up parts of Power
+        * Management in JAGCore
+        */
+       u16 pdown_speed;
+       u8 pdown_duplex;
+
+       /* Tx Memory Variables */
+       struct tx_ring tx_ring;
+
+       /* Rx Memory Variables */
+       struct rx_ring rx_ring;
+
+       /* Stats */
+       struct ce_stats stats;
+
+       struct net_device_stats net_stats;
+};
+
 void et131x_error_timer_handler(unsigned long data);
 void et131x_enable_interrupts(struct et131x_adapter *adapter);
 void et131x_disable_interrupts(struct et131x_adapter *adapter);
diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h
deleted file mode 100644 (file)
index 74efdb0..0000000
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Agere Systems Inc.
- * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
- *
- * Copyright © 2005 Agere Systems Inc.
- * All rights reserved.
- *   http://www.agere.com
- *
- * Copyright (c) 2011 Mark Einon <mark.einon@gmail.com>
- *
- *------------------------------------------------------------------------------
- *
- * et131x_adapter.h - Header which includes the private adapter structure, along
- *                    with related support structures, macros, definitions, etc.
- *
- *------------------------------------------------------------------------------
- *
- * SOFTWARE LICENSE
- *
- * This software is provided subject to the following terms and conditions,
- * which you should read carefully before using the software.  Using this
- * software indicates your acceptance of these terms and conditions.  If you do
- * not agree with these terms and conditions, do not use the software.
- *
- * Copyright © 2005 Agere Systems Inc.
- * All rights reserved.
- *
- * Redistribution and use in source or binary forms, with or without
- * modifications, are permitted provided that the following conditions are met:
- *
- * . Redistributions of source code must retain the above copyright notice, this
- *    list of conditions and the following Disclaimer as comments in the code as
- *    well as in the documentation and/or other materials provided with the
- *    distribution.
- *
- * . Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following Disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- *
- * . Neither the name of Agere Systems Inc. nor the names of the contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * Disclaimer
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
- * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
- * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
- * DAMAGE.
- *
- */
-
-#ifndef __ET131X_ADAPTER_H__
-#define __ET131X_ADAPTER_H__
-
-#include "et1310_tx.h"
-#include "et1310_rx.h"
-
-/*
- * Do not change these values: if changed, then change also in respective
- * TXdma and Rxdma engines
- */
-#define NUM_DESC_PER_RING_TX         512    /* TX Do not change these values */
-#define NUM_TCB                      64
-
-/*
- * These values are all superseded by registry entries to facilitate tuning.
- * Once the desired performance has been achieved, the optimal registry values
- * should be re-populated to these #defines:
- */
-#define NUM_TRAFFIC_CLASSES          1
-
-#define TX_ERROR_PERIOD             1000
-
-#define LO_MARK_PERCENT_FOR_PSR     15
-#define LO_MARK_PERCENT_FOR_RX      15
-
-/* RFD (Receive Frame Descriptor) */
-struct rfd {
-       struct list_head list_node;
-       struct sk_buff *skb;
-       u32 len;        /* total size of receive frame */
-       u16 bufferindex;
-       u8 ringindex;
-};
-
-/* Flow Control */
-#define FLOW_BOTH      0
-#define FLOW_TXONLY    1
-#define FLOW_RXONLY    2
-#define FLOW_NONE      3
-
-/* Struct to define some device statistics */
-struct ce_stats {
-       /* MIB II variables
-        *
-        * NOTE: atomic_t types are only guaranteed to store 24-bits; if we
-        * MUST have 32, then we'll need another way to perform atomic
-        * operations
-        */
-       u32             unicast_pkts_rcvd;
-       atomic_t        unicast_pkts_xmtd;
-       u32             multicast_pkts_rcvd;
-       atomic_t        multicast_pkts_xmtd;
-       u32             broadcast_pkts_rcvd;
-       atomic_t        broadcast_pkts_xmtd;
-       u32             rcvd_pkts_dropped;
-
-       /* Tx Statistics. */
-       u32             tx_underflows;
-
-       u32             tx_collisions;
-       u32             tx_excessive_collisions;
-       u32             tx_first_collisions;
-       u32             tx_late_collisions;
-       u32             tx_max_pkt_errs;
-       u32             tx_deferred;
-
-       /* Rx Statistics. */
-       u32             rx_overflows;
-
-       u32             rx_length_errs;
-       u32             rx_align_errs;
-       u32             rx_crc_errs;
-       u32             rx_code_violations;
-       u32             rx_other_errs;
-
-       u32             synchronous_iterations;
-       u32             interrupt_status;
-};
-
-/* The private adapter structure */
-struct et131x_adapter {
-       struct net_device *netdev;
-       struct pci_dev *pdev;
-       struct mii_bus *mii_bus;
-       struct phy_device *phydev;
-       struct work_struct task;
-
-       /* Flags that indicate current state of the adapter */
-       u32 flags;
-
-       /* local link state, to determine if a state change has occurred */
-       int link;
-
-       /* Configuration  */
-       u8 rom_addr[ETH_ALEN];
-       u8 addr[ETH_ALEN];
-       bool has_eeprom;
-       u8 eeprom_data[2];
-
-       /* Spinlocks */
-       spinlock_t lock;
-
-       spinlock_t tcb_send_qlock;
-       spinlock_t tcb_ready_qlock;
-       spinlock_t send_hw_lock;
-
-       spinlock_t rcv_lock;
-       spinlock_t rcv_pend_lock;
-       spinlock_t fbr_lock;
-
-       spinlock_t phy_lock;
-
-       /* Packet Filter and look ahead size */
-       u32 packet_filter;
-
-       /* multicast list */
-       u32 multicast_addr_count;
-       u8 multicast_list[NIC_MAX_MCAST_LIST][ETH_ALEN];
-
-       /* Pointer to the device's PCI register space */
-       struct address_map __iomem *regs;
-
-       /* Registry parameters */
-       u8 wanted_flow;         /* Flow we want for 802.3x flow control */
-       u32 registry_jumbo_packet;      /* Max supported ethernet packet size */
-
-       /* Derived from the registry: */
-       u8 flowcontrol;         /* flow control validated by the far-end */
-
-       /* Minimize init-time */
-       struct timer_list error_timer;
-
-       /* variable putting the phy into coma mode when boot up with no cable
-        * plugged in after 5 seconds
-        */
-       u8 boot_coma;
-
-       /* Next two used to save power information at power down. This
-        * information will be used during power up to set up parts of Power
-        * Management in JAGCore
-        */
-       u16 pdown_speed;
-       u8 pdown_duplex;
-
-       /* Tx Memory Variables */
-       struct tx_ring tx_ring;
-
-       /* Rx Memory Variables */
-       struct rx_ring rx_ring;
-
-       /* Stats */
-       struct ce_stats stats;
-
-       struct net_device_stats net_stats;
-};
-
-#endif /* __ET131X_ADAPTER_H__ */