efikamx: add support for power key

This patch adds support for power key button of the efika mx. It's connected
on  GPIO 2 31.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 386bf2a..4d102ea 100644 (file)
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/fsl_devices.h>
@@ -48,10 +49,13 @@
 #define EFIKAMX_GREEN_LED      (2*32 + 14)
 #define EFIKAMX_RED_LED                (2*32 + 15)
 
+#define EFIKAMX_POWER_KEY      (1*32 + 31)
+
 /* the pci ids pin have pull up. they're driven low according to board id */
 #define MX51_PAD_PCBID0        IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
 #define MX51_PAD_PCBID1        IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
 #define MX51_PAD_PCBID2        IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PWRKEY        IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
 
 static iomux_v3_cfg_t mx51efikamx_pads[] = {
        /* UART1 */
@@ -90,6 +94,9 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = {
        MX51_PAD_CSI1_D9__GPIO_3_13,
        MX51_PAD_CSI1_VSYNC__GPIO_3_14,
        MX51_PAD_CSI1_HSYNC__GPIO_3_15,
+
+       /* power key */
+       MX51_PAD_PWRKEY,
 };
 
 /* Serial ports */
@@ -219,6 +226,22 @@ static struct platform_device mx51_efikamx_leds_device = {
        },
 };
 
+static struct gpio_keys_button mx51_efikamx_powerkey[] = {
+       {
+               .code = KEY_POWER,
+               .gpio = EFIKAMX_POWER_KEY,
+               .type = EV_PWR,
+               .desc = "Power Button (CM)",
+               .wakeup = 1,
+               .debounce_interval = 10, /* ms */
+       },
+};
+
+static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
+       .buttons = mx51_efikamx_powerkey,
+       .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
+};
+
 static void __init mxc_board_init(void)
 {
        mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
@@ -235,6 +258,7 @@ static void __init mxc_board_init(void)
        }
 
        platform_device_register(&mx51_efikamx_leds_device);
+       imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
 }
 
 static void __init mx51_efikamx_timer_init(void)