+++ /dev/null
-/* video.S
- *
- * Display adapter & video mode setup, version 2.13 (14-May-99)
- *
- * Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz>
- * Based on the original setup.S code (C) Linus Torvalds and Mats Anderson
- *
- * Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999
- *
- * For further information, look at Documentation/svga.txt.
- *
- */
-
-/* Enable autodetection of SVGA adapters and modes. */
-#undef CONFIG_VIDEO_SVGA
-
-/* Enable autodetection of VESA modes */
-#define CONFIG_VIDEO_VESA
-
-/* Enable compacting of mode table */
-#define CONFIG_VIDEO_COMPACT
-
-/* Retain screen contents when switching modes */
-#define CONFIG_VIDEO_RETAIN
-
-/* Enable local mode list */
-#undef CONFIG_VIDEO_LOCAL
-
-/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
-#undef CONFIG_VIDEO_400_HACK
-
-/* Hack that lets you force specific BIOS mode ID and specific dimensions */
-#undef CONFIG_VIDEO_GFX_HACK
-#define VIDEO_GFX_BIOS_AX 0x4f02 /* 800x600 on ThinkPad */
-#define VIDEO_GFX_BIOS_BX 0x0102
-#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425 /* 100x37 */
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-/* Special video modes */
-#define VIDEO_FIRST_SPECIAL 0x0f00
-#define VIDEO_80x25 0x0f00
-#define VIDEO_8POINT 0x0f01
-#define VIDEO_80x43 0x0f02
-#define VIDEO_80x28 0x0f03
-#define VIDEO_CURRENT_MODE 0x0f04
-#define VIDEO_80x30 0x0f05
-#define VIDEO_80x34 0x0f06
-#define VIDEO_80x60 0x0f07
-#define VIDEO_GFX_HACK 0x0f08
-#define VIDEO_LAST_SPECIAL 0x0f09
-
-/* Video modes given by resolution */
-#define VIDEO_FIRST_RESOLUTION 0x1000
-
-/* The "recalculate timings" flag */
-#define VIDEO_RECALC 0x8000
-
-/* Positions of various video parameters passed to the kernel */
-/* (see also include/linux/tty.h) */
-#define PARAM_CURSOR_POS 0x00
-#define PARAM_VIDEO_PAGE 0x04
-#define PARAM_VIDEO_MODE 0x06
-#define PARAM_VIDEO_COLS 0x07
-#define PARAM_VIDEO_EGA_BX 0x0a
-#define PARAM_VIDEO_LINES 0x0e
-#define PARAM_HAVE_VGA 0x0f
-#define PARAM_FONT_POINTS 0x10
-
-#define PARAM_LFB_WIDTH 0x12
-#define PARAM_LFB_HEIGHT 0x14
-#define PARAM_LFB_DEPTH 0x16
-#define PARAM_LFB_BASE 0x18
-#define PARAM_LFB_SIZE 0x1c
-#define PARAM_LFB_LINELENGTH 0x24
-#define PARAM_LFB_COLORS 0x26
-#define PARAM_VESAPM_SEG 0x2e
-#define PARAM_VESAPM_OFF 0x30
-#define PARAM_LFB_PAGES 0x32
-#define PARAM_VESA_ATTRIB 0x34
-#define PARAM_CAPABILITIES 0x36
-
-/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
-#ifdef CONFIG_VIDEO_RETAIN
-#define DO_STORE call store_screen
-#else
-#define DO_STORE
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# This is the main entry point called by setup.S
-# %ds *must* be pointing to the bootsector
-video: pushw %ds # We use different segments
- pushw %ds # FS contains original DS
- popw %fs
- pushw %cs # DS is equal to CS
- popw %ds
- pushw %cs # ES is equal to CS
- popw %es
- xorw %ax, %ax
- movw %ax, %gs # GS is zero
- cld
- call basic_detect # Basic adapter type testing (EGA/VGA/MDA/CGA)
-#ifdef CONFIG_VIDEO_SELECT
- movw %fs:(0x01fa), %ax # User selected video mode
- cmpw $ASK_VGA, %ax # Bring up the menu
- jz vid2
-
- call mode_set # Set the mode
- jc vid1
-
- leaw badmdt, %si # Invalid mode ID
- call prtstr
-vid2: call mode_menu
-vid1:
-#ifdef CONFIG_VIDEO_RETAIN
- call restore_screen # Restore screen contents
-#endif /* CONFIG_VIDEO_RETAIN */
- call store_edid
-#endif /* CONFIG_VIDEO_SELECT */
- call mode_params # Store mode parameters
- popw %ds # Restore original DS
- ret
-
-# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel.
-basic_detect:
- movb $0, %fs:(PARAM_HAVE_VGA)
- movb $0x12, %ah # Check EGA/VGA
- movb $0x10, %bl
- int $0x10
- movw %bx, %fs:(PARAM_VIDEO_EGA_BX) # Identifies EGA to the kernel
- cmpb $0x10, %bl # No, it's a CGA/MDA/HGA card.
- je basret
-
- incb adapter
- movw $0x1a00, %ax # Check EGA or VGA?
- int $0x10
- cmpb $0x1a, %al # 1a means VGA...
- jne basret # anything else is EGA.
-
- incb %fs:(PARAM_HAVE_VGA) # We've detected a VGA
- incb adapter
-basret: ret
-
-# Store the video mode parameters for later usage by the kernel.
-# This is done by asking the BIOS except for the rows/columns
-# parameters in the default 80x25 mode -- these are set directly,
-# because some very obscure BIOSes supply insane values.
-mode_params:
-#ifdef CONFIG_VIDEO_SELECT
- cmpb $0, graphic_mode
- jnz mopar_gr
-#endif
- movb $0x03, %ah # Read cursor position
- xorb %bh, %bh
- int $0x10
- movw %dx, %fs:(PARAM_CURSOR_POS)
- movb $0x0f, %ah # Read page/mode/width
- int $0x10
- movw %bx, %fs:(PARAM_VIDEO_PAGE)
- movw %ax, %fs:(PARAM_VIDEO_MODE) # Video mode and screen width
- cmpb $0x7, %al # MDA/HGA => segment differs
- jnz mopar0
-
- movw $0xb000, video_segment
-mopar0: movw %gs:(0x485), %ax # Font size
- movw %ax, %fs:(PARAM_FONT_POINTS) # (valid only on EGA/VGA)
- movw force_size, %ax # Forced size?
- orw %ax, %ax
- jz mopar1
-
- movb %ah, %fs:(PARAM_VIDEO_COLS)
- movb %al, %fs:(PARAM_VIDEO_LINES)
- ret
-
-mopar1: movb $25, %al
- cmpb $0, adapter # If we are on CGA/MDA/HGA, the
- jz mopar2 # screen must have 25 lines.
-
- movb %gs:(0x484), %al # On EGA/VGA, use the EGA+ BIOS
- incb %al # location of max lines.
-mopar2: movb %al, %fs:(PARAM_VIDEO_LINES)
- ret
-
-#ifdef CONFIG_VIDEO_SELECT
-# Fetching of VESA frame buffer parameters
-mopar_gr:
- leaw modelist+1024, %di
- movb $0x23, %fs:(PARAM_HAVE_VGA)
- movw 16(%di), %ax
- movw %ax, %fs:(PARAM_LFB_LINELENGTH)
- movw 18(%di), %ax
- movw %ax, %fs:(PARAM_LFB_WIDTH)
- movw 20(%di), %ax
- movw %ax, %fs:(PARAM_LFB_HEIGHT)
- movb 25(%di), %al
- movb $0, %ah
- movw %ax, %fs:(PARAM_LFB_DEPTH)
- movb 29(%di), %al
- movb $0, %ah
- movw %ax, %fs:(PARAM_LFB_PAGES)
- movl 40(%di), %eax
- movl %eax, %fs:(PARAM_LFB_BASE)
- movl 31(%di), %eax
- movl %eax, %fs:(PARAM_LFB_COLORS)
- movl 35(%di), %eax
- movl %eax, %fs:(PARAM_LFB_COLORS+4)
- movw 0(%di), %ax
- movw %ax, %fs:(PARAM_VESA_ATTRIB)
-
-# get video mem size
- leaw modelist+1024, %di
- movw $0x4f00, %ax
- int $0x10
- xorl %eax, %eax
- movw 18(%di), %ax
- movl %eax, %fs:(PARAM_LFB_SIZE)
-
-# store mode capabilities
- movl 10(%di), %eax
- movl %eax, %fs:(PARAM_CAPABILITIES)
-
-# switching the DAC to 8-bit is for <= 8 bpp only
- movw %fs:(PARAM_LFB_DEPTH), %ax
- cmpw $8, %ax
- jg dac_done
-
-# get DAC switching capability
- xorl %eax, %eax
- movb 10(%di), %al
- testb $1, %al
- jz dac_set
-
-# attempt to switch DAC to 8-bit
- movw $0x4f08, %ax
- movw $0x0800, %bx
- int $0x10
- cmpw $0x004f, %ax
- jne dac_set
- movb %bh, dac_size # store actual DAC size
-
-dac_set:
-# set color size to DAC size
- movb dac_size, %al
- movb %al, %fs:(PARAM_LFB_COLORS+0)
- movb %al, %fs:(PARAM_LFB_COLORS+2)
- movb %al, %fs:(PARAM_LFB_COLORS+4)
- movb %al, %fs:(PARAM_LFB_COLORS+6)
-
-# set color offsets to 0
- movb $0, %fs:(PARAM_LFB_COLORS+1)
- movb $0, %fs:(PARAM_LFB_COLORS+3)
- movb $0, %fs:(PARAM_LFB_COLORS+5)
- movb $0, %fs:(PARAM_LFB_COLORS+7)
-
-dac_done:
-# get protected mode interface informations
- movw $0x4f0a, %ax
- xorw %bx, %bx
- xorw %di, %di
- int $0x10
- cmp $0x004f, %ax
- jnz no_pm
-
- movw %es, %fs:(PARAM_VESAPM_SEG)
- movw %di, %fs:(PARAM_VESAPM_OFF)
-no_pm: ret
-
-# The video mode menu
-mode_menu:
- leaw keymsg, %si # "Return/Space/Timeout" message
- call prtstr
- call flush
-nokey: call getkt
-
- cmpb $0x0d, %al # ENTER ?
- je listm # yes - manual mode selection
-
- cmpb $0x20, %al # SPACE ?
- je defmd1 # no - repeat
-
- call beep
- jmp nokey
-
-defmd1: ret # No mode chosen? Default 80x25
-
-listm: call mode_table # List mode table
-listm0: leaw name_bann, %si # Print adapter name
- call prtstr
- movw card_name, %si
- orw %si, %si
- jnz an2
-
- movb adapter, %al
- leaw old_name, %si
- orb %al, %al
- jz an1
-
- leaw ega_name, %si
- decb %al
- jz an1
-
- leaw vga_name, %si
- jmp an1
-
-an2: call prtstr
- leaw svga_name, %si
-an1: call prtstr
- leaw listhdr, %si # Table header
- call prtstr
- movb $0x30, %dl # DL holds mode number
- leaw modelist, %si
-lm1: cmpw $ASK_VGA, (%si) # End?
- jz lm2
-
- movb %dl, %al # Menu selection number
- call prtchr
- call prtsp2
- lodsw
- call prthw # Mode ID
- call prtsp2
- movb 0x1(%si), %al
- call prtdec # Rows
- movb $0x78, %al # the letter 'x'
- call prtchr
- lodsw
- call prtdec # Columns
- movb $0x0d, %al # New line
- call prtchr
- movb $0x0a, %al
- call prtchr
- incb %dl # Next character
- cmpb $0x3a, %dl
- jnz lm1
-
- movb $0x61, %dl
- jmp lm1
-
-lm2: leaw prompt, %si # Mode prompt
- call prtstr
- leaw edit_buf, %di # Editor buffer
-lm3: call getkey
- cmpb $0x0d, %al # Enter?
- jz lment
-
- cmpb $0x08, %al # Backspace?
- jz lmbs
-
- cmpb $0x20, %al # Printable?
- jc lm3
-
- cmpw $edit_buf+4, %di # Enough space?
- jz lm3
-
- stosb
- call prtchr
- jmp lm3
-
-lmbs: cmpw $edit_buf, %di # Backspace
- jz lm3
-
- decw %di
- movb $0x08, %al
- call prtchr
- call prtspc
- movb $0x08, %al
- call prtchr
- jmp lm3
-
-lment: movb $0, (%di)
- leaw crlft, %si
- call prtstr
- leaw edit_buf, %si
- cmpb $0, (%si) # Empty string = default mode
- jz lmdef
-
- cmpb $0, 1(%si) # One character = menu selection
- jz mnusel
-
- cmpw $0x6373, (%si) # "scan" => mode scanning
- jnz lmhx
-
- cmpw $0x6e61, 2(%si)
- jz lmscan
-
-lmhx: xorw %bx, %bx # Else => mode ID in hex
-lmhex: lodsb
- orb %al, %al
- jz lmuse1
-
- subb $0x30, %al
- jc lmbad
-
- cmpb $10, %al
- jc lmhx1
-
- subb $7, %al
- andb $0xdf, %al
- cmpb $10, %al
- jc lmbad
-
- cmpb $16, %al
- jnc lmbad
-
-lmhx1: shlw $4, %bx
- orb %al, %bl
- jmp lmhex
-
-lmuse1: movw %bx, %ax
- jmp lmuse
-
-mnusel: lodsb # Menu selection
- xorb %ah, %ah
- subb $0x30, %al
- jc lmbad
-
- cmpb $10, %al
- jc lmuse
-
- cmpb $0x61-0x30, %al
- jc lmbad
-
- subb $0x61-0x30-10, %al
- cmpb $36, %al
- jnc lmbad
-
-lmuse: call mode_set
- jc lmdef
-
-lmbad: leaw unknt, %si
- call prtstr
- jmp lm2
-lmscan: cmpb $0, adapter # Scanning only on EGA/VGA
- jz lmbad
-
- movw $0, mt_end # Scanning of modes is
- movb $1, scanning # done as new autodetection.
- call mode_table
- jmp listm0
-lmdef: ret
-
-# Additional parts of mode_set... (relative jumps, you know)
-setv7: # Video7 extended modes
- DO_STORE
- subb $VIDEO_FIRST_V7>>8, %bh
- movw $0x6f05, %ax
- int $0x10
- stc
- ret
-
-_setrec: jmp setrec # Ugly...
-_set_80x25: jmp set_80x25
-
-# Aliases for backward compatibility.
-setalias:
- movw $VIDEO_80x25, %ax
- incw %bx
- jz mode_set
-
- movb $VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al
- incw %bx
- jnz setbad # Fall-through!
-
-# Setting of user mode (AX=mode ID) => CF=success
-mode_set:
- movw %ax, %fs:(0x01fa) # Store mode for use in acpi_wakeup.S
- movw %ax, %bx
- cmpb $0xff, %ah
- jz setalias
-
- testb $VIDEO_RECALC>>8, %ah
- jnz _setrec
-
- cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
- jnc setres
-
- cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
- jz setspc
-
- cmpb $VIDEO_FIRST_V7>>8, %ah
- jz setv7
-
- cmpb $VIDEO_FIRST_VESA>>8, %ah
- jnc check_vesa
-
- orb %ah, %ah
- jz setmenu
-
- decb %ah
- jz setbios
-
-setbad: clc
- movb $0, do_restore # The screen needn't be restored
- ret
-
-setvesa:
- DO_STORE
- subb $VIDEO_FIRST_VESA>>8, %bh
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
-setbios:
- DO_STORE
- int $0x10 # Standard BIOS mode set call
- pushw %bx
- movb $0x0f, %ah # Check if really set
- int $0x10
- popw %bx
- cmpb %bl, %al
- jnz setbad
-
- stc
- ret
-
-setspc: xorb %bh, %bh # Set special mode
- cmpb $VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl
- jnc setbad
-
- addw %bx, %bx
- jmp *spec_inits(%bx)
-
-setmenu:
- orb %al, %al # 80x25 is an exception
- jz _set_80x25
-
- pushw %bx # Set mode chosen from menu
- call mode_table # Build the mode table
- popw %ax
- shlw $2, %ax
- addw %ax, %si
- cmpw %di, %si
- jnc setbad
-
- movw (%si), %ax # Fetch mode ID
-_m_s: jmp mode_set
-
-setres: pushw %bx # Set mode chosen by resolution
- call mode_table
- popw %bx
- xchgb %bl, %bh
-setr1: lodsw
- cmpw $ASK_VGA, %ax # End of the list?
- jz setbad
-
- lodsw
- cmpw %bx, %ax
- jnz setr1
-
- movw -4(%si), %ax # Fetch mode ID
- jmp _m_s
-
-check_vesa:
-#ifdef CONFIG_FIRMWARE_EDID
- leaw modelist+1024, %di
- movw $0x4f00, %ax
- int $0x10
- cmpw $0x004f, %ax
- jnz setbad
-
- movw 4(%di), %ax
- movw %ax, vbe_version
-#endif
- leaw modelist+1024, %di
- subb $VIDEO_FIRST_VESA>>8, %bh
- movw %bx, %cx # Get mode information structure
- movw $0x4f01, %ax
- int $0x10
- addb $VIDEO_FIRST_VESA>>8, %bh
- cmpw $0x004f, %ax
- jnz setbad
-
- movb (%di), %al # Check capabilities.
- andb $0x19, %al
- cmpb $0x09, %al
- jz setvesa # This is a text mode
-
- movb (%di), %al # Check capabilities.
- andb $0x99, %al
- cmpb $0x99, %al
- jnz _setbad # Doh! No linear frame buffer.
-
- subb $VIDEO_FIRST_VESA>>8, %bh
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz _setbad # AH=0 if OK
-
- movb $1, graphic_mode # flag graphic mode
- movb $0, do_restore # no screen restore
- stc
- ret
-
-_setbad: jmp setbad # Ugly...
-
-# Recalculate vertical display end registers -- this fixes various
-# inconsistencies of extended modes on many adapters. Called when
-# the VIDEO_RECALC flag is set in the mode ID.
-
-setrec: subb $VIDEO_RECALC>>8, %ah # Set the base mode
- call mode_set
- jnc rct3
-
- movw %gs:(0x485), %ax # Font size in pixels
- movb %gs:(0x484), %bl # Number of rows
- incb %bl
- mulb %bl # Number of visible
- decw %ax # scan lines - 1
- movw $0x3d4, %dx
- movw %ax, %bx
- movb $0x12, %al # Lower 8 bits
- movb %bl, %ah
- outw %ax, %dx
- movb $0x07, %al # Bits 8 and 9 in the overflow register
- call inidx
- xchgb %al, %ah
- andb $0xbd, %ah
- shrb %bh
- jnc rct1
- orb $0x02, %ah
-rct1: shrb %bh
- jnc rct2
- orb $0x40, %ah
-rct2: movb $0x07, %al
- outw %ax, %dx
- stc
-rct3: ret
-
-# Table of routines for setting of the special modes.
-spec_inits:
- .word set_80x25
- .word set_8pixel
- .word set_80x43
- .word set_80x28
- .word set_current
- .word set_80x30
- .word set_80x34
- .word set_80x60
- .word set_gfx
-
-# Set the 80x25 mode. If already set, do nothing.
-set_80x25:
- movw $0x5019, force_size # Override possibly broken BIOS
-use_80x25:
-#ifdef CONFIG_VIDEO_400_HACK
- movw $0x1202, %ax # Force 400 scan lines
- movb $0x30, %bl
- int $0x10
-#else
- movb $0x0f, %ah # Get current mode ID
- int $0x10
- cmpw $0x5007, %ax # Mode 7 (80x25 mono) is the only one available
- jz st80 # on CGA/MDA/HGA and is also available on EGAM
-
- cmpw $0x5003, %ax # Unknown mode, force 80x25 color
- jnz force3
-
-st80: cmpb $0, adapter # CGA/MDA/HGA => mode 3/7 is always 80x25
- jz set80
-
- movb %gs:(0x0484), %al # This is EGA+ -- beware of 80x50 etc.
- orb %al, %al # Some buggy BIOS'es set 0 rows
- jz set80
-
- cmpb $24, %al # It's hopefully correct
- jz set80
-#endif /* CONFIG_VIDEO_400_HACK */
-force3: DO_STORE
- movw $0x0003, %ax # Forced set
- int $0x10
-set80: stc
- ret
-
-# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls.
-set_8pixel:
- DO_STORE
- call use_80x25 # The base is 80x25
-set_8pt:
- movw $0x1112, %ax # Use 8x8 font
- xorb %bl, %bl
- int $0x10
- movw $0x1200, %ax # Use alternate print screen
- movb $0x20, %bl
- int $0x10
- movw $0x1201, %ax # Turn off cursor emulation
- movb $0x34, %bl
- int $0x10
- movb $0x01, %ah # Define cursor scan lines 6-7
- movw $0x0607, %cx
- int $0x10
-set_current:
- stc
- ret
-
-# Set the 80x28 mode. This mode works on all VGA's, because it's a standard
-# 80x25 mode with 14-point fonts instead of 16-point.
-set_80x28:
- DO_STORE
- call use_80x25 # The base is 80x25
-set14: movw $0x1111, %ax # Use 9x14 font
- xorb %bl, %bl
- int $0x10
- movb $0x01, %ah # Define cursor scan lines 11-12
- movw $0x0b0c, %cx
- int $0x10
- stc
- ret
-
-# Set the 80x43 mode. This mode is works on all VGA's.
-# It's a 350-scanline mode with 8-pixel font.
-set_80x43:
- DO_STORE
- movw $0x1201, %ax # Set 350 scans
- movb $0x30, %bl
- int $0x10
- movw $0x0003, %ax # Reset video mode
- int $0x10
- jmp set_8pt # Use 8-pixel font
-
-# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font.
-set_80x30:
- call use_80x25 # Start with real 80x25
- DO_STORE
- movw $0x3cc, %dx # Get CRTC port
- inb %dx, %al
- movb $0xd4, %dl
- rorb %al # Mono or color?
- jc set48a
-
- movb $0xb4, %dl
-set48a: movw $0x0c11, %ax # Vertical sync end (also unlocks CR0-7)
- call outidx
- movw $0x0b06, %ax # Vertical total
- call outidx
- movw $0x3e07, %ax # (Vertical) overflow
- call outidx
- movw $0xea10, %ax # Vertical sync start
- call outidx
- movw $0xdf12, %ax # Vertical display end
- call outidx
- movw $0xe715, %ax # Vertical blank start
- call outidx
- movw $0x0416, %ax # Vertical blank end
- call outidx
- pushw %dx
- movb $0xcc, %dl # Misc output register (read)
- inb %dx, %al
- movb $0xc2, %dl # (write)
- andb $0x0d, %al # Preserve clock select bits and color bit
- orb $0xe2, %al # Set correct sync polarity
- outb %al, %dx
- popw %dx
- movw $0x501e, force_size
- stc # That's all.
- ret
-
-# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font.
-set_80x34:
- call set_80x30 # Set 480 scans
- call set14 # And 14-pt font
- movw $0xdb12, %ax # VGA vertical display end
- movw $0x5022, force_size
-setvde: call outidx
- stc
- ret
-
-# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font.
-set_80x60:
- call set_80x30 # Set 480 scans
- call set_8pt # And 8-pt font
- movw $0xdf12, %ax # VGA vertical display end
- movw $0x503c, force_size
- jmp setvde
-
-# Special hack for ThinkPad graphics
-set_gfx:
-#ifdef CONFIG_VIDEO_GFX_HACK
- movw $VIDEO_GFX_BIOS_AX, %ax
- movw $VIDEO_GFX_BIOS_BX, %bx
- int $0x10
- movw $VIDEO_GFX_DUMMY_RESOLUTION, force_size
- stc
-#endif
- ret
-
-#ifdef CONFIG_VIDEO_RETAIN
-
-# Store screen contents to temporary buffer.
-store_screen:
- cmpb $0, do_restore # Already stored?
- jnz stsr
-
- testb $CAN_USE_HEAP, loadflags # Have we space for storing?
- jz stsr
-
- pushw %ax
- pushw %bx
- pushw force_size # Don't force specific size
- movw $0, force_size
- call mode_params # Obtain params of current mode
- popw force_size
- movb %fs:(PARAM_VIDEO_LINES), %ah
- movb %fs:(PARAM_VIDEO_COLS), %al
- movw %ax, %bx # BX=dimensions
- mulb %ah
- movw %ax, %cx # CX=number of characters
- addw %ax, %ax # Calculate image size
- addw $modelist+1024+4, %ax
- cmpw heap_end_ptr, %ax
- jnc sts1 # Unfortunately, out of memory
-
- movw %fs:(PARAM_CURSOR_POS), %ax # Store mode params
- leaw modelist+1024, %di
- stosw
- movw %bx, %ax
- stosw
- pushw %ds # Store the screen
- movw video_segment, %ds
- xorw %si, %si
- rep
- movsw
- popw %ds
- incb do_restore # Screen will be restored later
-sts1: popw %bx
- popw %ax
-stsr: ret
-
-# Restore screen contents from temporary buffer.
-restore_screen:
- cmpb $0, do_restore # Has the screen been stored?
- jz res1
-
- call mode_params # Get parameters of current mode
- movb %fs:(PARAM_VIDEO_LINES), %cl
- movb %fs:(PARAM_VIDEO_COLS), %ch
- leaw modelist+1024, %si # Screen buffer
- lodsw # Set cursor position
- movw %ax, %dx
- cmpb %cl, %dh
- jc res2
-
- movb %cl, %dh
- decb %dh
-res2: cmpb %ch, %dl
- jc res3
-
- movb %ch, %dl
- decb %dl
-res3: movb $0x02, %ah
- movb $0x00, %bh
- int $0x10
- lodsw # Display size
- movb %ah, %dl # DL=number of lines
- movb $0, %ah # BX=phys. length of orig. line
- movw %ax, %bx
- cmpb %cl, %dl # Too many?
- jc res4
-
- pushw %ax
- movb %dl, %al
- subb %cl, %al
- mulb %bl
- addw %ax, %si
- addw %ax, %si
- popw %ax
- movb %cl, %dl
-res4: cmpb %ch, %al # Too wide?
- jc res5
-
- movb %ch, %al # AX=width of src. line
-res5: movb $0, %cl
- xchgb %ch, %cl
- movw %cx, %bp # BP=width of dest. line
- pushw %es
- movw video_segment, %es
- xorw %di, %di # Move the data
- addw %bx, %bx # Convert BX and BP to _bytes_
- addw %bp, %bp
-res6: pushw %si
- pushw %di
- movw %ax, %cx
- rep
- movsw
- popw %di
- popw %si
- addw %bp, %di
- addw %bx, %si
- decb %dl
- jnz res6
-
- popw %es # Done
-res1: ret
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port)
-outidx: outb %al, %dx
- pushw %ax
- movb %ah, %al
- incw %dx
- outb %al, %dx
- decw %dx
- popw %ax
- ret
-
-# Build the table of video modes (stored after the setup.S code at the
-# `modelist' label. Each video mode record looks like:
-# .word MODE-ID (our special mode ID (see above))
-# .byte rows (number of rows)
-# .byte columns (number of columns)
-# Returns address of the end of the table in DI, the end is marked
-# with a ASK_VGA ID.
-mode_table:
- movw mt_end, %di # Already filled?
- orw %di, %di
- jnz mtab1x
-
- leaw modelist, %di # Store standard modes:
- movl $VIDEO_80x25 + 0x50190000, %eax # The 80x25 mode (ALL)
- stosl
- movb adapter, %al # CGA/MDA/HGA -- no more modes
- orb %al, %al
- jz mtabe
-
- decb %al
- jnz mtabv
-
- movl $VIDEO_8POINT + 0x502b0000, %eax # The 80x43 EGA mode
- stosl
- jmp mtabe
-
-mtab1x: jmp mtab1
-
-mtabv: leaw vga_modes, %si # All modes for std VGA
- movw $vga_modes_end-vga_modes, %cx
- rep # I'm unable to use movsw as I don't know how to store a half
- movsb # of the expression above to cx without using explicit shr.
-
- cmpb $0, scanning # Mode scan requested?
- jz mscan1
-
- call mode_scan
-mscan1:
-
-#ifdef CONFIG_VIDEO_LOCAL
- call local_modes
-#endif /* CONFIG_VIDEO_LOCAL */
-
-#ifdef CONFIG_VIDEO_VESA
- call vesa_modes # Detect VESA VGA modes
-#endif /* CONFIG_VIDEO_VESA */
-
-#ifdef CONFIG_VIDEO_SVGA
- cmpb $0, scanning # Bypass when scanning
- jnz mscan2
-
- call svga_modes # Detect SVGA cards & modes
-mscan2:
-#endif /* CONFIG_VIDEO_SVGA */
-
-mtabe:
-
-#ifdef CONFIG_VIDEO_COMPACT
- leaw modelist, %si
- movw %di, %dx
- movw %si, %di
-cmt1: cmpw %dx, %si # Scan all modes
- jz cmt2
-
- leaw modelist, %bx # Find in previous entries
- movw 2(%si), %cx
-cmt3: cmpw %bx, %si
- jz cmt4
-
- cmpw 2(%bx), %cx # Found => don't copy this entry
- jz cmt5
-
- addw $4, %bx
- jmp cmt3
-
-cmt4: movsl # Copy entry
- jmp cmt1
-
-cmt5: addw $4, %si # Skip entry
- jmp cmt1
-
-cmt2:
-#endif /* CONFIG_VIDEO_COMPACT */
-
- movw $ASK_VGA, (%di) # End marker
- movw %di, mt_end
-mtab1: leaw modelist, %si # SI=mode list, DI=list end
-ret0: ret
-
-# Modes usable on all standard VGAs
-vga_modes:
- .word VIDEO_8POINT
- .word 0x5032 # 80x50
- .word VIDEO_80x43
- .word 0x502b # 80x43
- .word VIDEO_80x28
- .word 0x501c # 80x28
- .word VIDEO_80x30
- .word 0x501e # 80x30
- .word VIDEO_80x34
- .word 0x5022 # 80x34
- .word VIDEO_80x60
- .word 0x503c # 80x60
-#ifdef CONFIG_VIDEO_GFX_HACK
- .word VIDEO_GFX_HACK
- .word VIDEO_GFX_DUMMY_RESOLUTION
-#endif
-
-vga_modes_end:
-# Detect VESA modes.
-
-#ifdef CONFIG_VIDEO_VESA
-vesa_modes:
- cmpb $2, adapter # VGA only
- jnz ret0
-
- movw %di, %bp # BP=original mode table end
- addw $0x200, %di # Buffer space
- movw $0x4f00, %ax # VESA Get card info call
- int $0x10
- movw %bp, %di
- cmpw $0x004f, %ax # Successful?
- jnz ret0
-
- cmpw $0x4556, 0x200(%di)
- jnz ret0
-
- cmpw $0x4153, 0x202(%di)
- jnz ret0
-
- movw $vesa_name, card_name # Set name to "VESA VGA"
- pushw %gs
- lgsw 0x20e(%di), %si # GS:SI=mode list
- movw $128, %cx # Iteration limit
-vesa1:
-# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst.
-# XXX: lodsw %gs:(%si), %ax # Get next mode in the list
- gs; lodsw
- cmpw $0xffff, %ax # End of the table?
- jz vesar
-
- cmpw $0x0080, %ax # Check validity of mode ID
- jc vesa2
-
- orb %ah, %ah # Valid IDs: 0x0000-0x007f/0x0100-0x07ff
- jz vesan # Certain BIOSes report 0x80-0xff!
-
- cmpw $0x0800, %ax
- jnc vesae
-
-vesa2: pushw %cx
- movw %ax, %cx # Get mode information structure
- movw $0x4f01, %ax
- int $0x10
- movw %cx, %bx # BX=mode number
- addb $VIDEO_FIRST_VESA>>8, %bh
- popw %cx
- cmpw $0x004f, %ax
- jnz vesan # Don't report errors (buggy BIOSES)
-
- movb (%di), %al # Check capabilities. We require
- andb $0x19, %al # a color text mode.
- cmpb $0x09, %al
- jnz vesan
-
- cmpw $0xb800, 8(%di) # Standard video memory address required
- jnz vesan
-
- testb $2, (%di) # Mode characteristics supplied?
- movw %bx, (%di) # Store mode number
- jz vesa3
-
- xorw %dx, %dx
- movw 0x12(%di), %bx # Width
- orb %bh, %bh
- jnz vesan
-
- movb %bl, 0x3(%di)
- movw 0x14(%di), %ax # Height
- orb %ah, %ah
- jnz vesan
-
- movb %al, 2(%di)
- mulb %bl
- cmpw $8193, %ax # Small enough for Linux console driver?
- jnc vesan
-
- jmp vesaok
-
-vesa3: subw $0x8108, %bx # This mode has no detailed info specified,
- jc vesan # so it must be a standard VESA mode.
-
- cmpw $5, %bx
- jnc vesan
-
- movw vesa_text_mode_table(%bx), %ax
- movw %ax, 2(%di)
-vesaok: addw $4, %di # The mode is valid. Store it.
-vesan: loop vesa1 # Next mode. Limit exceeded => error
-vesae: leaw vesaer, %si
- call prtstr
- movw %bp, %di # Discard already found modes.
-vesar: popw %gs
- ret
-
-# Dimensions of standard VESA text modes
-vesa_text_mode_table:
- .byte 60, 80 # 0108
- .byte 25, 132 # 0109
- .byte 43, 132 # 010A
- .byte 50, 132 # 010B
- .byte 60, 132 # 010C
-#endif /* CONFIG_VIDEO_VESA */
-
-# Scan for video modes. A bit dirty, but should work.
-mode_scan:
- movw $0x0100, %cx # Start with mode 0
-scm1: movb $0, %ah # Test the mode
- movb %cl, %al
- int $0x10
- movb $0x0f, %ah
- int $0x10
- cmpb %cl, %al
- jnz scm2 # Mode not set
-
- movw $0x3c0, %dx # Test if it's a text mode
- movb $0x10, %al # Mode bits
- call inidx
- andb $0x03, %al
- jnz scm2
-
- movb $0xce, %dl # Another set of mode bits
- movb $0x06, %al
- call inidx
- shrb %al
- jc scm2
-
- movb $0xd4, %dl # Cursor location
- movb $0x0f, %al
- call inidx
- orb %al, %al
- jnz scm2
-
- movw %cx, %ax # Ok, store the mode
- stosw
- movb %gs:(0x484), %al # Number of rows
- incb %al
- stosb
- movw %gs:(0x44a), %ax # Number of columns
- stosb
-scm2: incb %cl
- jns scm1
-
- movw $0x0003, %ax # Return back to mode 3
- int $0x10
- ret
-
-tstidx: outw %ax, %dx # OUT DX,AX and inidx
-inidx: outb %al, %dx # Read from indexed VGA register
- incw %dx # AL=index, DX=index reg port -> AL=data
- inb %dx, %al
- decw %dx
- ret
-
-# Try to detect type of SVGA card and supply (usually approximate) video
-# mode table for it.
-
-#ifdef CONFIG_VIDEO_SVGA
-svga_modes:
- leaw svga_table, %si # Test all known SVGA adapters
-dosvga: lodsw
- movw %ax, %bp # Default mode table
- orw %ax, %ax
- jz didsv1
-
- lodsw # Pointer to test routine
- pushw %si
- pushw %di
- pushw %es
- movw $0xc000, %bx
- movw %bx, %es
- call *%ax # Call test routine
- popw %es
- popw %di
- popw %si
- orw %bp, %bp
- jz dosvga
-
- movw %bp, %si # Found, copy the modes
- movb svga_prefix, %ah
-cpsvga: lodsb
- orb %al, %al
- jz didsv
-
- stosw
- movsw
- jmp cpsvga
-
-didsv: movw %si, card_name # Store pointer to card name
-didsv1: ret
-
-# Table of all known SVGA cards. For each card, we store a pointer to
-# a table of video modes supported by the card and a pointer to a routine
-# used for testing of presence of the card. The video mode table is always
-# followed by the name of the card or the chipset.
-svga_table:
- .word ati_md, ati_test
- .word oak_md, oak_test
- .word paradise_md, paradise_test
- .word realtek_md, realtek_test
- .word s3_md, s3_test
- .word chips_md, chips_test
- .word video7_md, video7_test
- .word cirrus5_md, cirrus5_test
- .word cirrus6_md, cirrus6_test
- .word cirrus1_md, cirrus1_test
- .word ahead_md, ahead_test
- .word everex_md, everex_test
- .word genoa_md, genoa_test
- .word trident_md, trident_test
- .word tseng_md, tseng_test
- .word 0
-
-# Test routines and mode tables:
-
-# S3 - The test algorithm was taken from the SuperProbe package
-# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org
-s3_test:
- movw $0x0f35, %cx # we store some constants in cl/ch
- movw $0x03d4, %dx
- movb $0x38, %al
- call inidx
- movb %al, %bh # store current CRT-register 0x38
- movw $0x0038, %ax
- call outidx # disable writing to special regs
- movb %cl, %al # check whether we can write special reg 0x35
- call inidx
- movb %al, %bl # save the current value of CRT reg 0x35
- andb $0xf0, %al # clear bits 0-3
- movb %al, %ah
- movb %cl, %al # and write it to CRT reg 0x35
- call outidx
- call inidx # now read it back
- andb %ch, %al # clear the upper 4 bits
- jz s3_2 # the first test failed. But we have a
-
- movb %bl, %ah # second chance
- movb %cl, %al
- call outidx
- jmp s3_1 # do the other tests
-
-s3_2: movw %cx, %ax # load ah with 0xf and al with 0x35
- orb %bl, %ah # set the upper 4 bits of ah with the orig value
- call outidx # write ...
- call inidx # ... and reread
- andb %cl, %al # turn off the upper 4 bits
- pushw %ax
- movb %bl, %ah # restore old value in register 0x35
- movb %cl, %al
- call outidx
- popw %ax
- cmpb %ch, %al # setting lower 4 bits was successful => bad
- je no_s3 # writing is allowed => this is not an S3
-
-s3_1: movw $0x4838, %ax # allow writing to special regs by putting
- call outidx # magic number into CRT-register 0x38
- movb %cl, %al # check whether we can write special reg 0x35
- call inidx
- movb %al, %bl
- andb $0xf0, %al
- movb %al, %ah
- movb %cl, %al
- call outidx
- call inidx
- andb %ch, %al
- jnz no_s3 # no, we can't write => no S3
-
- movw %cx, %ax
- orb %bl, %ah
- call outidx
- call inidx
- andb %ch, %al
- pushw %ax
- movb %bl, %ah # restore old value in register 0x35
- movb %cl, %al
- call outidx
- popw %ax
- cmpb %ch, %al
- jne no_s31 # writing not possible => no S3
- movb $0x30, %al
- call inidx # now get the S3 id ...
- leaw idS3, %di
- movw $0x10, %cx
- repne
- scasb
- je no_s31
-
- movb %bh, %ah
- movb $0x38, %al
- jmp s3rest
-
-no_s3: movb $0x35, %al # restore CRT register 0x35
- movb %bl, %ah
- call outidx
-no_s31: xorw %bp, %bp # Detection failed
-s3rest: movb %bh, %ah
- movb $0x38, %al # restore old value of CRT register 0x38
- jmp outidx
-
-idS3: .byte 0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95
- .byte 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0
-
-s3_md: .byte 0x54, 0x2b, 0x84
- .byte 0x55, 0x19, 0x84
- .byte 0
- .ascii "S3"
- .byte 0
-
-# ATI cards.
-ati_test:
- leaw idati, %si
- movw $0x31, %di
- movw $0x09, %cx
- repe
- cmpsb
- je atiok
-
- xorw %bp, %bp
-atiok: ret
-
-idati: .ascii "761295520"
-
-ati_md: .byte 0x23, 0x19, 0x84
- .byte 0x33, 0x2c, 0x84
- .byte 0x22, 0x1e, 0x64
- .byte 0x21, 0x19, 0x64
- .byte 0x58, 0x21, 0x50
- .byte 0x5b, 0x1e, 0x50
- .byte 0
- .ascii "ATI"
- .byte 0
-
-# AHEAD
-ahead_test:
- movw $0x200f, %ax
- movw $0x3ce, %dx
- outw %ax, %dx
- incw %dx
- inb %dx, %al
- cmpb $0x20, %al
- je isahed
-
- cmpb $0x21, %al
- je isahed
-
- xorw %bp, %bp
-isahed: ret
-
-ahead_md:
- .byte 0x22, 0x2c, 0x84
- .byte 0x23, 0x19, 0x84
- .byte 0x24, 0x1c, 0x84
- .byte 0x2f, 0x32, 0xa0
- .byte 0x32, 0x22, 0x50
- .byte 0x34, 0x42, 0x50
- .byte 0
- .ascii "Ahead"
- .byte 0
-
-# Chips & Tech.
-chips_test:
- movw $0x3c3, %dx
- inb %dx, %al
- orb $0x10, %al
- outb %al, %dx
- movw $0x104, %dx
- inb %dx, %al
- movb %al, %bl
- movw $0x3c3, %dx
- inb %dx, %al
- andb $0xef, %al
- outb %al, %dx
- cmpb $0xa5, %bl
- je cantok
-
- xorw %bp, %bp
-cantok: ret
-
-chips_md:
- .byte 0x60, 0x19, 0x84
- .byte 0x61, 0x32, 0x84
- .byte 0
- .ascii "Chips & Technologies"
- .byte 0
-
-# Cirrus Logic 5X0
-cirrus1_test:
- movw $0x3d4, %dx
- movb $0x0c, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bl
- xorb %al, %al
- outb %al, %dx
- decw %dx
- movb $0x1f, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bh
- xorb %ah, %ah
- shlb $4, %al
- movw %ax, %cx
- movb %bh, %al
- shrb $4, %al
- addw %ax, %cx
- shlw $8, %cx
- addw $6, %cx
- movw %cx, %ax
- movw $0x3c4, %dx
- outw %ax, %dx
- incw %dx
- inb %dx, %al
- andb %al, %al
- jnz nocirr
-
- movb %bh, %al
- outb %al, %dx
- inb %dx, %al
- cmpb $0x01, %al
- je iscirr
-
-nocirr: xorw %bp, %bp
-iscirr: movw $0x3d4, %dx
- movb %bl, %al
- xorb %ah, %ah
- shlw $8, %ax
- addw $0x0c, %ax
- outw %ax, %dx
- ret
-
-cirrus1_md:
- .byte 0x1f, 0x19, 0x84
- .byte 0x20, 0x2c, 0x84
- .byte 0x22, 0x1e, 0x84
- .byte 0x31, 0x25, 0x64
- .byte 0
- .ascii "Cirrus Logic 5X0"
- .byte 0
-
-# Cirrus Logic 54XX
-cirrus5_test:
- movw $0x3c4, %dx
- movb $6, %al
- call inidx
- movb %al, %bl # BL=backup
- movw $6, %ax
- call tstidx
- cmpb $0x0f, %al
- jne c5fail
-
- movw $0x1206, %ax
- call tstidx
- cmpb $0x12, %al
- jne c5fail
-
- movb $0x1e, %al
- call inidx
- movb %al, %bh
- movb %bh, %ah
- andb $0xc0, %ah
- movb $0x1e, %al
- call tstidx
- andb $0x3f, %al
- jne c5xx
-
- movb $0x1e, %al
- movb %bh, %ah
- orb $0x3f, %ah
- call tstidx
- xorb $0x3f, %al
- andb $0x3f, %al
-c5xx: pushf
- movb $0x1e, %al
- movb %bh, %ah
- outw %ax, %dx
- popf
- je c5done
-
-c5fail: xorw %bp, %bp
-c5done: movb $6, %al
- movb %bl, %ah
- outw %ax, %dx
- ret
-
-cirrus5_md:
- .byte 0x14, 0x19, 0x84
- .byte 0x54, 0x2b, 0x84
- .byte 0
- .ascii "Cirrus Logic 54XX"
- .byte 0
-
-# Cirrus Logic 64XX -- no known extra modes, but must be identified, because
-# it's misidentified by the Ahead test.
-cirrus6_test:
- movw $0x3ce, %dx
- movb $0x0a, %al
- call inidx
- movb %al, %bl # BL=backup
- movw $0xce0a, %ax
- call tstidx
- orb %al, %al
- jne c2fail
-
- movw $0xec0a, %ax
- call tstidx
- cmpb $0x01, %al
- jne c2fail
-
- movb $0xaa, %al
- call inidx # 4X, 5X, 7X and 8X are valid 64XX chip ID's.
- shrb $4, %al
- subb $4, %al
- jz c6done
-
- decb %al
- jz c6done
-
- subb $2, %al
- jz c6done
-
- decb %al
- jz c6done
-
-c2fail: xorw %bp, %bp
-c6done: movb $0x0a, %al
- movb %bl, %ah
- outw %ax, %dx
- ret
-
-cirrus6_md:
- .byte 0
- .ascii "Cirrus Logic 64XX"
- .byte 0
-
-# Everex / Trident
-everex_test:
- movw $0x7000, %ax
- xorw %bx, %bx
- int $0x10
- cmpb $0x70, %al
- jne noevrx
-
- shrw $4, %dx
- cmpw $0x678, %dx
- je evtrid
-
- cmpw $0x236, %dx
- jne evrxok
-
-evtrid: leaw trident_md, %bp
-evrxok: ret
-
-noevrx: xorw %bp, %bp
- ret
-
-everex_md:
- .byte 0x03, 0x22, 0x50
- .byte 0x04, 0x3c, 0x50
- .byte 0x07, 0x2b, 0x64
- .byte 0x08, 0x4b, 0x64
- .byte 0x0a, 0x19, 0x84
- .byte 0x0b, 0x2c, 0x84
- .byte 0x16, 0x1e, 0x50
- .byte 0x18, 0x1b, 0x64
- .byte 0x21, 0x40, 0xa0
- .byte 0x40, 0x1e, 0x84
- .byte 0
- .ascii "Everex/Trident"
- .byte 0
-
-# Genoa.
-genoa_test:
- leaw idgenoa, %si # Check Genoa 'clues'
- xorw %ax, %ax
- movb %es:(0x37), %al
- movw %ax, %di
- movw $0x04, %cx
- decw %si
- decw %di
-l1: incw %si
- incw %di
- movb (%si), %al
- testb %al, %al
- jz l2
-
- cmpb %es:(%di), %al
-l2: loope l1
- orw %cx, %cx
- je isgen
-
- xorw %bp, %bp
-isgen: ret
-
-idgenoa: .byte 0x77, 0x00, 0x99, 0x66
-
-genoa_md:
- .byte 0x58, 0x20, 0x50
- .byte 0x5a, 0x2a, 0x64
- .byte 0x60, 0x19, 0x84
- .byte 0x61, 0x1d, 0x84
- .byte 0x62, 0x20, 0x84
- .byte 0x63, 0x2c, 0x84
- .byte 0x64, 0x3c, 0x84
- .byte 0x6b, 0x4f, 0x64
- .byte 0x72, 0x3c, 0x50
- .byte 0x74, 0x42, 0x50
- .byte 0x78, 0x4b, 0x64
- .byte 0
- .ascii "Genoa"
- .byte 0
-
-# OAK
-oak_test:
- leaw idoakvga, %si
- movw $0x08, %di
- movw $0x08, %cx
- repe
- cmpsb
- je isoak
-
- xorw %bp, %bp
-isoak: ret
-
-idoakvga: .ascii "OAK VGA "
-
-oak_md: .byte 0x4e, 0x3c, 0x50
- .byte 0x4f, 0x3c, 0x84
- .byte 0x50, 0x19, 0x84
- .byte 0x51, 0x2b, 0x84
- .byte 0
- .ascii "OAK"
- .byte 0
-
-# WD Paradise.
-paradise_test:
- leaw idparadise, %si
- movw $0x7d, %di
- movw $0x04, %cx
- repe
- cmpsb
- je ispara
-
- xorw %bp, %bp
-ispara: ret
-
-idparadise: .ascii "VGA="
-
-paradise_md:
- .byte 0x41, 0x22, 0x50
- .byte 0x47, 0x1c, 0x84
- .byte 0x55, 0x19, 0x84
- .byte 0x54, 0x2c, 0x84
- .byte 0
- .ascii "Paradise"
- .byte 0
-
-# Trident.
-trident_test:
- movw $0x3c4, %dx
- movb $0x0e, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- xchgb %al, %ah
- xorb %al, %al
- outb %al, %dx
- inb %dx, %al
- xchgb %ah, %al
- movb %al, %bl # Strange thing ... in the book this wasn't
- andb $0x02, %bl # necessary but it worked on my card which
- jz setb2 # is a trident. Without it the screen goes
- # blurred ...
- andb $0xfd, %al
- jmp clrb2
-
-setb2: orb $0x02, %al
-clrb2: outb %al, %dx
- andb $0x0f, %ah
- cmpb $0x02, %ah
- je istrid
-
- xorw %bp, %bp
-istrid: ret
-
-trident_md:
- .byte 0x50, 0x1e, 0x50
- .byte 0x51, 0x2b, 0x50
- .byte 0x52, 0x3c, 0x50
- .byte 0x57, 0x19, 0x84
- .byte 0x58, 0x1e, 0x84
- .byte 0x59, 0x2b, 0x84
- .byte 0x5a, 0x3c, 0x84
- .byte 0
- .ascii "Trident"
- .byte 0
-
-# Tseng.
-tseng_test:
- movw $0x3cd, %dx
- inb %dx, %al # Could things be this simple ! :-)
- movb %al, %bl
- movb $0x55, %al
- outb %al, %dx
- inb %dx, %al
- movb %al, %ah
- movb %bl, %al
- outb %al, %dx
- cmpb $0x55, %ah
- je istsen
-
-isnot: xorw %bp, %bp
-istsen: ret
-
-tseng_md:
- .byte 0x26, 0x3c, 0x50
- .byte 0x2a, 0x28, 0x64
- .byte 0x23, 0x19, 0x84
- .byte 0x24, 0x1c, 0x84
- .byte 0x22, 0x2c, 0x84
- .byte 0x21, 0x3c, 0x84
- .byte 0
- .ascii "Tseng"
- .byte 0
-
-# Video7.
-video7_test:
- movw $0x3cc, %dx
- inb %dx, %al
- movw $0x3b4, %dx
- andb $0x01, %al
- jz even7
-
- movw $0x3d4, %dx
-even7: movb $0x0c, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bl
- movb $0x55, %al
- outb %al, %dx
- inb %dx, %al
- decw %dx
- movb $0x1f, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bh
- decw %dx
- movb $0x0c, %al
- outb %al, %dx
- incw %dx
- movb %bl, %al
- outb %al, %dx
- movb $0x55, %al
- xorb $0xea, %al
- cmpb %bh, %al
- jne isnot
-
- movb $VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching
- ret
-
-video7_md:
- .byte 0x40, 0x2b, 0x50
- .byte 0x43, 0x3c, 0x50
- .byte 0x44, 0x3c, 0x64
- .byte 0x41, 0x19, 0x84
- .byte 0x42, 0x2c, 0x84
- .byte 0x45, 0x1c, 0x84
- .byte 0
- .ascii "Video 7"
- .byte 0
-
-# Realtek VGA
-realtek_test:
- leaw idrtvga, %si
- movw $0x45, %di
- movw $0x0b, %cx
- repe
- cmpsb
- je isrt
-
- xorw %bp, %bp
-isrt: ret
-
-idrtvga: .ascii "REALTEK VGA"
-
-realtek_md:
- .byte 0x1a, 0x3c, 0x50
- .byte 0x1b, 0x19, 0x84
- .byte 0x1c, 0x1e, 0x84
- .byte 0x1d, 0x2b, 0x84
- .byte 0x1e, 0x3c, 0x84
- .byte 0
- .ascii "REALTEK"
- .byte 0
-
-#endif /* CONFIG_VIDEO_SVGA */
-
-# User-defined local mode table (VGA only)
-#ifdef CONFIG_VIDEO_LOCAL
-local_modes:
- leaw local_mode_table, %si
-locm1: lodsw
- orw %ax, %ax
- jz locm2
-
- stosw
- movsw
- jmp locm1
-
-locm2: ret
-
-# This is the table of local video modes which can be supplied manually
-# by the user. Each entry consists of mode ID (word) and dimensions
-# (byte for column count and another byte for row count). These modes
-# are placed before all SVGA and VESA modes and override them if table
-# compacting is enabled. The table must end with a zero word followed
-# by NUL-terminated video adapter name.
-local_mode_table:
- .word 0x0100 # Example: 40x25
- .byte 25,40
- .word 0
- .ascii "Local"
- .byte 0
-#endif /* CONFIG_VIDEO_LOCAL */
-
-# Read a key and return the ASCII code in al, scan code in ah
-getkey: xorb %ah, %ah
- int $0x16
- ret
-
-# Read a key with a timeout of 30 seconds.
-# The hardware clock is used to get the time.
-getkt: call gettime
- addb $30, %al # Wait 30 seconds
- cmpb $60, %al
- jl lminute
-
- subb $60, %al
-lminute:
- movb %al, %cl
-again: movb $0x01, %ah
- int $0x16
- jnz getkey # key pressed, so get it
-
- call gettime
- cmpb %cl, %al
- jne again
-
- movb $0x20, %al # timeout, return `space'
- ret
-
-# Flush the keyboard buffer
-flush: movb $0x01, %ah
- int $0x16
- jz empty
-
- xorb %ah, %ah
- int $0x16
- jmp flush
-
-empty: ret
-
-# Print hexadecimal number.
-prthw: pushw %ax
- movb %ah, %al
- call prthb
- popw %ax
-prthb: pushw %ax
- shrb $4, %al
- call prthn
- popw %ax
- andb $0x0f, %al
-prthn: cmpb $0x0a, %al
- jc prth1
-
- addb $0x07, %al
-prth1: addb $0x30, %al
- jmp prtchr
-
-# Print decimal number in al
-prtdec: pushw %ax
- pushw %cx
- xorb %ah, %ah
- movb $0x0a, %cl
- idivb %cl
- cmpb $0x09, %al
- jbe lt100
-
- call prtdec
- jmp skip10
-
-lt100: addb $0x30, %al
- call prtchr
-skip10: movb %ah, %al
- addb $0x30, %al
- call prtchr
- popw %cx
- popw %ax
- ret
-
-store_edid:
-#ifdef CONFIG_FIRMWARE_EDID
- pushw %es # just save all registers
- pushw %ax
- pushw %bx
- pushw %cx
- pushw %dx
- pushw %di
-
- pushw %fs
- popw %es
-
- movl $0x13131313, %eax # memset block with 0x13
- movw $32, %cx
- movw $0x140, %di
- cld
- rep
- stosl
-
- cmpw $0x0200, vbe_version # only do EDID on >= VBE2.0
- jl no_edid
-
- pushw %es # save ES
- xorw %di, %di # Report Capability
- pushw %di
- popw %es # ES:DI must be 0:0
- movw $0x4f15, %ax
- xorw %bx, %bx
- xorw %cx, %cx
- int $0x10
- popw %es # restore ES
-
- cmpb $0x00, %ah # call successful
- jne no_edid
-
- cmpb $0x4f, %al # function supported
- jne no_edid
-
- movw $0x4f15, %ax # do VBE/DDC
- movw $0x01, %bx
- movw $0x00, %cx
- movw $0x00, %dx
- movw $0x140, %di
- int $0x10
-
-no_edid:
- popw %di # restore all registers
- popw %dx
- popw %cx
- popw %bx
- popw %ax
- popw %es
-#endif
- ret
-
-# VIDEO_SELECT-only variables
-mt_end: .word 0 # End of video mode table if built
-edit_buf: .space 6 # Line editor buffer
-card_name: .word 0 # Pointer to adapter name
-scanning: .byte 0 # Performing mode scan
-do_restore: .byte 0 # Screen contents altered during mode change
-svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes
-graphic_mode: .byte 0 # Graphic mode with a linear frame buffer
-dac_size: .byte 6 # DAC bit depth
-vbe_version: .word 0 # VBE bios version
-
-# Status messages
-keymsg: .ascii "Press <RETURN> to see video modes available, "
- .ascii "<SPACE> to continue or wait 30 secs"
- .byte 0x0d, 0x0a, 0
-
-listhdr: .byte 0x0d, 0x0a
- .ascii "Mode: COLSxROWS:"
-
-crlft: .byte 0x0d, 0x0a, 0
-
-prompt: .byte 0x0d, 0x0a
- .asciz "Enter mode number or `scan': "
-
-unknt: .asciz "Unknown mode ID. Try again."
-
-badmdt: .ascii "You passed an undefined mode number."
- .byte 0x0d, 0x0a, 0
-
-vesaer: .ascii "Error: Scanning of VESA modes failed. Please "
- .ascii "report to <mj@ucw.cz>."
- .byte 0x0d, 0x0a, 0
-
-old_name: .asciz "CGA/MDA/HGA"
-
-ega_name: .asciz "EGA"
-
-svga_name: .ascii " "
-
-vga_name: .asciz "VGA"
-
-vesa_name: .asciz "VESA"
-
-name_bann: .asciz "Video adapter: "
-#endif /* CONFIG_VIDEO_SELECT */
-
-# Other variables:
-adapter: .byte 0 # Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA
-video_segment: .word 0xb800 # Video memory segment
-force_size: .word 0 # Use this size instead of the one in BIOS vars
git.openpandora.org / pandora-kernel.git / commitdiff