config INFINIBAND_IPATH
- tristate "QLogic InfiniPath Driver"
- depends on 64BIT && NET
+ tristate "QLogic HTX HCA support"
+ depends on 64BIT && NET && HT_IRQ
---help---
- This is a driver for QLogic InfiniPath host channel adapters,
+ This is a driver for the obsolete QLogic Hyper-Transport
+ IB host channel adapter (model QHT7140),
including InfiniBand verbs support. This driver allows these
devices to be used with both kernel upper level protocols such
as IP-over-InfiniBand as well as with userspace applications
(in conjunction with InfiniBand userspace access).
+ For QLogic PCIe QLE based cards, use the QIB driver instead.
ipath_user_pages.o \
ipath_user_sdma.o \
ipath_verbs_mcast.o \
- ipath_verbs.o \
- ipath_iba7220.o \
- ipath_sd7220.o \
- ipath_sd7220_img.o
+ ipath_verbs.o
ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
-ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o
ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
+++ /dev/null
-#ifndef _IPATH_7220_H
-#define _IPATH_7220_H
-/*
- * Copyright (c) 2007 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This header file provides the declarations and common definitions
- * for (mostly) manipulation of the SerDes blocks within the IBA7220.
- * the functions declared should only be called from within other
- * 7220-related files such as ipath_iba7220.c or ipath_sd7220.c.
- */
-int ipath_sd7220_presets(struct ipath_devdata *dd);
-int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset);
-int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum, u8 *img,
- int len, int offset);
-int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum, const u8 *img,
- int len, int offset);
-/*
- * Below used for sdnum parameter, selecting one of the two sections
- * used for PCIe, or the single SerDes used for IB, which is the
- * only one currently used
- */
-#define IB_7220_SERDES 2
-
-int ipath_sd7220_ib_load(struct ipath_devdata *dd);
-int ipath_sd7220_ib_vfy(struct ipath_devdata *dd);
-
-#endif /* _IPATH_7220_H */
/* Only needed for registration, nothing else needs this info */
#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
-#define PCI_VENDOR_ID_QLOGIC 0x1077
#define PCI_DEVICE_ID_INFINIPATH_HT 0xd
-#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
-#define PCI_DEVICE_ID_INFINIPATH_7220 0x7220
/* Number of seconds before our card status check... */
#define STATUS_TIMEOUT 60
static const struct pci_device_id ipath_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
- { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
- { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_INFINIPATH_7220) },
{ 0, }
};
/* setup the chip-specific functions, as early as possible. */
switch (ent->device) {
case PCI_DEVICE_ID_INFINIPATH_HT:
-#ifdef CONFIG_HT_IRQ
ipath_init_iba6110_funcs(dd);
break;
-#else
- ipath_dev_err(dd, "QLogic HT device 0x%x cannot work if "
- "CONFIG_HT_IRQ is not enabled\n", ent->device);
- return -ENODEV;
-#endif
- case PCI_DEVICE_ID_INFINIPATH_PE800:
-#ifdef CONFIG_PCI_MSI
- ipath_init_iba6120_funcs(dd);
- break;
-#else
- ipath_dev_err(dd, "QLogic PCIE device 0x%x cannot work if "
- "CONFIG_PCI_MSI is not enabled\n", ent->device);
- return -ENODEV;
-#endif
- case PCI_DEVICE_ID_INFINIPATH_7220:
-#ifndef CONFIG_PCI_MSI
- ipath_dbg("CONFIG_PCI_MSI is not enabled, "
- "using INTx for unit %u\n", dd->ipath_unit);
-#endif
- ipath_init_iba7220_funcs(dd);
- break;
+
default:
ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
"failing\n", ent->device);
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-/*
- * This file contains all of the code that is specific to the
- * InfiniPath PCIe chip.
- */
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_kernel.h"
-#include "ipath_registers.h"
-
-static void ipath_setup_pe_setextled(struct ipath_devdata *, u64, u64);
-
-/*
- * This file contains all the chip-specific register information and
- * access functions for the QLogic InfiniPath PCI-Express chip.
- *
- * This lists the InfiniPath registers, in the actual chip layout.
- * This structure should never be directly accessed.
- */
-struct _infinipath_do_not_use_kernel_regs {
- unsigned long long Revision;
- unsigned long long Control;
- unsigned long long PageAlign;
- unsigned long long PortCnt;
- unsigned long long DebugPortSelect;
- unsigned long long Reserved0;
- unsigned long long SendRegBase;
- unsigned long long UserRegBase;
- unsigned long long CounterRegBase;
- unsigned long long Scratch;
- unsigned long long Reserved1;
- unsigned long long Reserved2;
- unsigned long long IntBlocked;
- unsigned long long IntMask;
- unsigned long long IntStatus;
- unsigned long long IntClear;
- unsigned long long ErrorMask;
- unsigned long long ErrorStatus;
- unsigned long long ErrorClear;
- unsigned long long HwErrMask;
- unsigned long long HwErrStatus;
- unsigned long long HwErrClear;
- unsigned long long HwDiagCtrl;
- unsigned long long MDIO;
- unsigned long long IBCStatus;
- unsigned long long IBCCtrl;
- unsigned long long ExtStatus;
- unsigned long long ExtCtrl;
- unsigned long long GPIOOut;
- unsigned long long GPIOMask;
- unsigned long long GPIOStatus;
- unsigned long long GPIOClear;
- unsigned long long RcvCtrl;
- unsigned long long RcvBTHQP;
- unsigned long long RcvHdrSize;
- unsigned long long RcvHdrCnt;
- unsigned long long RcvHdrEntSize;
- unsigned long long RcvTIDBase;
- unsigned long long RcvTIDCnt;
- unsigned long long RcvEgrBase;
- unsigned long long RcvEgrCnt;
- unsigned long long RcvBufBase;
- unsigned long long RcvBufSize;
- unsigned long long RxIntMemBase;
- unsigned long long RxIntMemSize;
- unsigned long long RcvPartitionKey;
- unsigned long long Reserved3;
- unsigned long long RcvPktLEDCnt;
- unsigned long long Reserved4[8];
- unsigned long long SendCtrl;
- unsigned long long SendPIOBufBase;
- unsigned long long SendPIOSize;
- unsigned long long SendPIOBufCnt;
- unsigned long long SendPIOAvailAddr;
- unsigned long long TxIntMemBase;
- unsigned long long TxIntMemSize;
- unsigned long long Reserved5;
- unsigned long long PCIeRBufTestReg0;
- unsigned long long PCIeRBufTestReg1;
- unsigned long long Reserved51[6];
- unsigned long long SendBufferError;
- unsigned long long SendBufferErrorCONT1;
- unsigned long long Reserved6SBE[6];
- unsigned long long RcvHdrAddr0;
- unsigned long long RcvHdrAddr1;
- unsigned long long RcvHdrAddr2;
- unsigned long long RcvHdrAddr3;
- unsigned long long RcvHdrAddr4;
- unsigned long long Reserved7RHA[11];
- unsigned long long RcvHdrTailAddr0;
- unsigned long long RcvHdrTailAddr1;
- unsigned long long RcvHdrTailAddr2;
- unsigned long long RcvHdrTailAddr3;
- unsigned long long RcvHdrTailAddr4;
- unsigned long long Reserved8RHTA[11];
- unsigned long long Reserved9SW[8];
- unsigned long long SerdesConfig0;
- unsigned long long SerdesConfig1;
- unsigned long long SerdesStatus;
- unsigned long long XGXSConfig;
- unsigned long long IBPLLCfg;
- unsigned long long Reserved10SW2[3];
- unsigned long long PCIEQ0SerdesConfig0;
- unsigned long long PCIEQ0SerdesConfig1;
- unsigned long long PCIEQ0SerdesStatus;
- unsigned long long Reserved11;
- unsigned long long PCIEQ1SerdesConfig0;
- unsigned long long PCIEQ1SerdesConfig1;
- unsigned long long PCIEQ1SerdesStatus;
- unsigned long long Reserved12;
-};
-
-struct _infinipath_do_not_use_counters {
- __u64 LBIntCnt;
- __u64 LBFlowStallCnt;
- __u64 Reserved1;
- __u64 TxUnsupVLErrCnt;
- __u64 TxDataPktCnt;
- __u64 TxFlowPktCnt;
- __u64 TxDwordCnt;
- __u64 TxLenErrCnt;
- __u64 TxMaxMinLenErrCnt;
- __u64 TxUnderrunCnt;
- __u64 TxFlowStallCnt;
- __u64 TxDroppedPktCnt;
- __u64 RxDroppedPktCnt;
- __u64 RxDataPktCnt;
- __u64 RxFlowPktCnt;
- __u64 RxDwordCnt;
- __u64 RxLenErrCnt;
- __u64 RxMaxMinLenErrCnt;
- __u64 RxICRCErrCnt;
- __u64 RxVCRCErrCnt;
- __u64 RxFlowCtrlErrCnt;
- __u64 RxBadFormatCnt;
- __u64 RxLinkProblemCnt;
- __u64 RxEBPCnt;
- __u64 RxLPCRCErrCnt;
- __u64 RxBufOvflCnt;
- __u64 RxTIDFullErrCnt;
- __u64 RxTIDValidErrCnt;
- __u64 RxPKeyMismatchCnt;
- __u64 RxP0HdrEgrOvflCnt;
- __u64 RxP1HdrEgrOvflCnt;
- __u64 RxP2HdrEgrOvflCnt;
- __u64 RxP3HdrEgrOvflCnt;
- __u64 RxP4HdrEgrOvflCnt;
- __u64 RxP5HdrEgrOvflCnt;
- __u64 RxP6HdrEgrOvflCnt;
- __u64 RxP7HdrEgrOvflCnt;
- __u64 RxP8HdrEgrOvflCnt;
- __u64 Reserved6;
- __u64 Reserved7;
- __u64 IBStatusChangeCnt;
- __u64 IBLinkErrRecoveryCnt;
- __u64 IBLinkDownedCnt;
- __u64 IBSymbolErrCnt;
-};
-
-#define IPATH_KREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
-#define IPATH_CREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_counters, field) / sizeof(u64))
-
-static const struct ipath_kregs ipath_pe_kregs = {
- .kr_control = IPATH_KREG_OFFSET(Control),
- .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
- .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
- .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
- .kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
- .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
- .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
- .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
- .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
- .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
- .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
- .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
- .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
- .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
- .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
- .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
- .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
- .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
- .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
- .kr_intclear = IPATH_KREG_OFFSET(IntClear),
- .kr_intmask = IPATH_KREG_OFFSET(IntMask),
- .kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
- .kr_mdio = IPATH_KREG_OFFSET(MDIO),
- .kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
- .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
- .kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
- .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
- .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
- .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
- .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
- .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
- .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
- .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
- .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
- .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
- .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
- .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
- .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
- .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
- .kr_revision = IPATH_KREG_OFFSET(Revision),
- .kr_scratch = IPATH_KREG_OFFSET(Scratch),
- .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
- .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
- .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendPIOAvailAddr),
- .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendPIOBufBase),
- .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendPIOBufCnt),
- .kr_sendpiosize = IPATH_KREG_OFFSET(SendPIOSize),
- .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
- .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
- .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
- .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
- .kr_serdesconfig0 = IPATH_KREG_OFFSET(SerdesConfig0),
- .kr_serdesconfig1 = IPATH_KREG_OFFSET(SerdesConfig1),
- .kr_serdesstatus = IPATH_KREG_OFFSET(SerdesStatus),
- .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
- .kr_ibpllcfg = IPATH_KREG_OFFSET(IBPLLCfg),
-
- /*
- * These should not be used directly via ipath_write_kreg64(),
- * use them with ipath_write_kreg64_port(),
- */
- .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
- .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0),
-
- /* The rcvpktled register controls one of the debug port signals, so
- * a packet activity LED can be connected to it. */
- .kr_rcvpktledcnt = IPATH_KREG_OFFSET(RcvPktLEDCnt),
- .kr_pcierbuftestreg0 = IPATH_KREG_OFFSET(PCIeRBufTestReg0),
- .kr_pcierbuftestreg1 = IPATH_KREG_OFFSET(PCIeRBufTestReg1),
- .kr_pcieq0serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig0),
- .kr_pcieq0serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ0SerdesConfig1),
- .kr_pcieq0serdesstatus = IPATH_KREG_OFFSET(PCIEQ0SerdesStatus),
- .kr_pcieq1serdesconfig0 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig0),
- .kr_pcieq1serdesconfig1 = IPATH_KREG_OFFSET(PCIEQ1SerdesConfig1),
- .kr_pcieq1serdesstatus = IPATH_KREG_OFFSET(PCIEQ1SerdesStatus)
-};
-
-static const struct ipath_cregs ipath_pe_cregs = {
- .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
- .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
- .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
- .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
- .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
- .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
- .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
- .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
- .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
- .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
- .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
- .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
- .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
- .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
- .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
- .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
- .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
- .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
- .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
- .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
- .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
- .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
- .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
- .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
- .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
- .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
- .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
- .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
- .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
- .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
- .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
- .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
- .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
-};
-
-/* kr_control bits */
-#define INFINIPATH_C_RESET 1U
-
-/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_RCVURG_MASK ((1U<<5)-1)
-#define INFINIPATH_I_RCVURG_SHIFT 0
-#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<5)-1)
-#define INFINIPATH_I_RCVAVAIL_SHIFT 12
-
-/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
-#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK 0x000000000000003fULL
-#define INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT 0
-#define INFINIPATH_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL
-#define INFINIPATH_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL
-#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
-#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
-#define INFINIPATH_HWE_PCIE1PLLFAILED 0x0400000000000000ULL
-#define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL
-#define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL
-
-#define IBA6120_IBCS_LINKTRAININGSTATE_MASK 0xf
-#define IBA6120_IBCS_LINKSTATE_SHIFT 4
-
-/* kr_extstatus bits */
-#define INFINIPATH_EXTS_FREQSEL 0x2
-#define INFINIPATH_EXTS_SERDESSEL 0x4
-#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
-#define INFINIPATH_EXTS_MEMBIST_FOUND 0x0000000000008000
-
-/* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET 0x5ULL
-
-#define _IPATH_GPIO_SDA_NUM 1
-#define _IPATH_GPIO_SCL_NUM 0
-
-#define IPATH_GPIO_SDA (1ULL << \
- (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-#define IPATH_GPIO_SCL (1ULL << \
- (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-
-#define INFINIPATH_RT_BUFSIZE_MASK 0xe0000000ULL
-#define INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid) \
- ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) >> 29) + 11 - 1)
-#define INFINIPATH_RT_BUFSIZE(tid) (1 << INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid))
-#define INFINIPATH_RT_IS_VALID(tid) \
- (((tid) & INFINIPATH_RT_BUFSIZE_MASK) && \
- ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) != INFINIPATH_RT_BUFSIZE_MASK)))
-#define INFINIPATH_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */
-#define INFINIPATH_RT_ADDR_SHIFT 10
-
-#define INFINIPATH_R_INTRAVAIL_SHIFT 16
-#define INFINIPATH_R_TAILUPD_SHIFT 31
-
-/* 6120 specific hardware errors... */
-static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = {
- INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"),
- INFINIPATH_HWE_MSG(PCIECPLTIMEOUT, "PCIe completion timeout"),
- /*
- * In practice, it's unlikely wthat we'll see PCIe PLL, or bus
- * parity or memory parity error failures, because most likely we
- * won't be able to talk to the core of the chip. Nonetheless, we
- * might see them, if they are in parts of the PCIe core that aren't
- * essential.
- */
- INFINIPATH_HWE_MSG(PCIE1PLLFAILED, "PCIePLL1"),
- INFINIPATH_HWE_MSG(PCIE0PLLFAILED, "PCIePLL0"),
- INFINIPATH_HWE_MSG(PCIEBUSPARITYXTLH, "PCIe XTLH core parity"),
- INFINIPATH_HWE_MSG(PCIEBUSPARITYXADM, "PCIe ADM TX core parity"),
- INFINIPATH_HWE_MSG(PCIEBUSPARITYRADM, "PCIe ADM RX core parity"),
- INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"),
- INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
-};
-
-#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
-#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
- << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
-
-static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *,
- u32, unsigned long);
-
-/*
- * On platforms using this chip, and not having ordered WC stores, we
- * can get TXE parity errors due to speculative reads to the PIO buffers,
- * and this, due to a chip bug can result in (many) false parity error
- * reports. So it's a debug print on those, and an info print on systems
- * where the speculative reads don't occur.
- */
-static void ipath_pe_txe_recover(struct ipath_devdata *dd)
-{
- if (ipath_unordered_wc())
- ipath_dbg("Recovering from TXE PIO parity error\n");
- else {
- ++ipath_stats.sps_txeparity;
- dev_info(&dd->pcidev->dev,
- "Recovering from TXE PIO parity error\n");
- }
-}
-
-
-/**
- * ipath_pe_handle_hwerrors - display hardware errors.
- * @dd: the infinipath device
- * @msg: the output buffer
- * @msgl: the size of the output buffer
- *
- * Use same msg buffer as regular errors to avoid excessive stack
- * use. Most hardware errors are catastrophic, but for right now,
- * we'll print them and continue. We reuse the same message buffer as
- * ipath_handle_errors() to avoid excessive stack usage.
- */
-static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
- size_t msgl)
-{
- ipath_err_t hwerrs;
- u32 bits, ctrl;
- int isfatal = 0;
- char bitsmsg[64];
- int log_idx;
-
- hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
- if (!hwerrs) {
- /*
- * better than printing cofusing messages
- * This seems to be related to clearing the crc error, or
- * the pll error during init.
- */
- ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
- return;
- } else if (hwerrs == ~0ULL) {
- ipath_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
- return;
- }
- ipath_stats.sps_hwerrs++;
-
- /* Always clear the error status register, except MEMBISTFAIL,
- * regardless of whether we continue or stop using the chip.
- * We want that set so we know it failed, even across driver reload.
- * We'll still ignore it in the hwerrmask. We do this partly for
- * diagnostics, but also for support */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
-
- hwerrs &= dd->ipath_hwerrmask;
-
- /* We log some errors to EEPROM, check if we have any of those. */
- for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx)
- if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log)
- ipath_inc_eeprom_err(dd, log_idx, 1);
-
- /*
- * make sure we get this much out, unless told to be quiet,
- * or it's occurred within the last 5 seconds
- */
- if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
- RXE_EAGER_PARITY)) ||
- (ipath_debug & __IPATH_VERBDBG))
- dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
- dd->ipath_lasthwerror |= hwerrs;
-
- if (hwerrs & ~dd->ipath_hwe_bitsextant)
- ipath_dev_err(dd, "hwerror interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (hwerrs & ~dd->ipath_hwe_bitsextant));
-
- ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
- if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
- /*
- * parity errors in send memory are recoverable,
- * just cancel the send (if indicated in * sendbuffererror),
- * count the occurrence, unfreeze (if no other handled
- * hardware error bits are set), and continue. They can
- * occur if a processor speculative read is done to the PIO
- * buffer while we are sending a packet, for example.
- */
- if (hwerrs & TXE_PIO_PARITY) {
- ipath_pe_txe_recover(dd);
- hwerrs &= ~TXE_PIO_PARITY;
- }
- if (!hwerrs) {
- static u32 freeze_cnt;
-
- freeze_cnt++;
- ipath_dbg("Clearing freezemode on ignored or recovered "
- "hardware error (%u)\n", freeze_cnt);
- ipath_clear_freeze(dd);
- }
- }
-
- *msg = '\0';
-
- if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
- strlcat(msg, "[Memory BIST test failed, InfiniPath hardware unusable]",
- msgl);
- /* ignore from now on, so disable until driver reloaded */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- ipath_format_hwerrors(hwerrs,
- ipath_6120_hwerror_msgs,
- sizeof(ipath_6120_hwerror_msgs)/
- sizeof(ipath_6120_hwerror_msgs[0]),
- msg, msgl);
-
- if (hwerrs & (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK
- << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT)) {
- bits = (u32) ((hwerrs >>
- INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) &
- INFINIPATH_HWE_PCIEMEMPARITYERR_MASK);
- snprintf(bitsmsg, sizeof bitsmsg,
- "[PCIe Mem Parity Errs %x] ", bits);
- strlcat(msg, bitsmsg, msgl);
- }
-
-#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
- INFINIPATH_HWE_COREPLL_RFSLIP )
-
- if (hwerrs & _IPATH_PLL_FAIL) {
- snprintf(bitsmsg, sizeof bitsmsg,
- "[PLL failed (%llx), InfiniPath hardware unusable]",
- (unsigned long long) hwerrs & _IPATH_PLL_FAIL);
- strlcat(msg, bitsmsg, msgl);
- /* ignore from now on, so disable until driver reloaded */
- dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
- /*
- * If it occurs, it is left masked since the external
- * interface is unused
- */
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- if (hwerrs) {
- /*
- * if any set that we aren't ignoring; only
- * make the complaint once, in case it's stuck
- * or recurring, and we get here multiple
- * times.
- */
- ipath_dev_err(dd, "%s hardware error\n", msg);
- if (dd->ipath_flags & IPATH_INITTED) {
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
- ipath_setup_pe_setextled(dd,
- INFINIPATH_IBCS_L_STATE_DOWN,
- INFINIPATH_IBCS_LT_STATE_DISABLED);
- ipath_dev_err(dd, "Fatal Hardware Error (freeze "
- "mode), no longer usable, SN %.16s\n",
- dd->ipath_serial);
- isfatal = 1;
- }
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- /* mark as having had error */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- /*
- * mark as not usable, at a minimum until driver
- * is reloaded, probably until reboot, since no
- * other reset is possible.
- */
- dd->ipath_flags &= ~IPATH_INITTED;
- } else
- *msg = 0; /* recovered from all of them */
-
- if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg && msg) {
- /*
- * for /sys status file ; if no trailing brace is copied,
- * we'll know it was truncated.
- */
- snprintf(dd->ipath_freezemsg, dd->ipath_freezelen,
- "{%s}", msg);
- }
-}
-
-/**
- * ipath_pe_boardname - fill in the board name
- * @dd: the infinipath device
- * @name: the output buffer
- * @namelen: the size of the output buffer
- *
- * info is based on the board revision register
- */
-static int ipath_pe_boardname(struct ipath_devdata *dd, char *name,
- size_t namelen)
-{
- char *n = NULL;
- u8 boardrev = dd->ipath_boardrev;
- int ret;
-
- switch (boardrev) {
- case 0:
- n = "InfiniPath_Emulation";
- break;
- case 1:
- n = "InfiniPath_QLE7140-Bringup";
- break;
- case 2:
- n = "InfiniPath_QLE7140";
- break;
- case 3:
- n = "InfiniPath_QMI7140";
- break;
- case 4:
- n = "InfiniPath_QEM7140";
- break;
- case 5:
- n = "InfiniPath_QMH7140";
- break;
- case 6:
- n = "InfiniPath_QLE7142";
- break;
- default:
- ipath_dev_err(dd,
- "Don't yet know about board with ID %u\n",
- boardrev);
- snprintf(name, namelen, "Unknown_InfiniPath_PCIe_%u",
- boardrev);
- break;
- }
- if (n)
- snprintf(name, namelen, "%s", n);
-
- if (dd->ipath_majrev != 4 || !dd->ipath_minrev || dd->ipath_minrev>2) {
- ipath_dev_err(dd, "Unsupported InfiniPath hardware revision %u.%u!\n",
- dd->ipath_majrev, dd->ipath_minrev);
- ret = 1;
- } else {
- ret = 0;
- if (dd->ipath_minrev >= 2)
- dd->ipath_f_put_tid = ipath_pe_put_tid_2;
- }
-
- /*
- * set here, not in ipath_init_*_funcs because we have to do
- * it after we can read chip registers.
- */
- dd->ipath_ureg_align =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_pagealign);
-
- return ret;
-}
-
-/**
- * ipath_pe_init_hwerrors - enable hardware errors
- * @dd: the infinipath device
- *
- * now that we have finished initializing everything that might reasonably
- * cause a hardware error, and cleared those errors bits as they occur,
- * we can enable hardware errors in the mask (potentially enabling
- * freeze mode), and enable hardware errors as errors (along with
- * everything else) in errormask
- */
-static void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
-{
- ipath_err_t val;
- u64 extsval;
-
- extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
-
- if (!(extsval & INFINIPATH_EXTS_MEMBIST_ENDTEST))
- ipath_dev_err(dd, "MemBIST did not complete!\n");
- if (extsval & INFINIPATH_EXTS_MEMBIST_FOUND)
- ipath_dbg("MemBIST corrected\n");
-
- val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */
-
- if (!dd->ipath_boardrev) // no PLL for Emulator
- val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
-
- if (dd->ipath_minrev < 2) {
- /* workaround bug 9460 in internal interface bus parity
- * checking. Fixed (HW bug 9490) in Rev2.
- */
- val &= ~INFINIPATH_HWE_PCIEBUSPARITYRADM;
- }
- dd->ipath_hwerrmask = val;
-}
-
-/**
- * ipath_pe_bringup_serdes - bring up the serdes
- * @dd: the infinipath device
- */
-static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
-{
- u64 val, config1, prev_val;
- int ret = 0;
-
- ipath_dbg("Trying to bringup serdes\n");
-
- if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
- INFINIPATH_HWE_SERDESPLLFAILED) {
- ipath_dbg("At start, serdes PLL failed bit set "
- "in hwerrstatus, clearing and continuing\n");
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- INFINIPATH_HWE_SERDESPLLFAILED);
- }
-
- dd->ibdeltainprog = 1;
- dd->ibsymsnap =
- ipath_read_creg32(dd, dd->ipath_cregs->cr_ibsymbolerrcnt);
- dd->iblnkerrsnap =
- ipath_read_creg32(dd, dd->ipath_cregs->cr_iblinkerrrecovcnt);
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
- config1 = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig1);
-
- ipath_cdbg(VERBOSE, "SerDes status config0=%llx config1=%llx, "
- "xgxsconfig %llx\n", (unsigned long long) val,
- (unsigned long long) config1, (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
- /*
- * Force reset on, also set rxdetect enable. Must do before reading
- * serdesstatus at least for simulation, or some of the bits in
- * serdes status will come back as undefined and cause simulation
- * failures
- */
- val |= INFINIPATH_SERDC0_RESET_PLL | INFINIPATH_SERDC0_RXDETECT_EN
- | INFINIPATH_SERDC0_L1PWR_DN;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
- /* be sure chip saw it */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- udelay(5); /* need pll reset set at least for a bit */
- /*
- * after PLL is reset, set the per-lane Resets and TxIdle and
- * clear the PLL reset and rxdetect (to get falling edge).
- * Leave L1PWR bits set (permanently)
- */
- val &= ~(INFINIPATH_SERDC0_RXDETECT_EN | INFINIPATH_SERDC0_RESET_PLL
- | INFINIPATH_SERDC0_L1PWR_DN);
- val |= INFINIPATH_SERDC0_RESET_MASK | INFINIPATH_SERDC0_TXIDLE;
- ipath_cdbg(VERBOSE, "Clearing pll reset and setting lane resets "
- "and txidle (%llx)\n", (unsigned long long) val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
- /* be sure chip saw it */
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- /* need PLL reset clear for at least 11 usec before lane
- * resets cleared; give it a few more to be sure */
- udelay(15);
- val &= ~(INFINIPATH_SERDC0_RESET_MASK | INFINIPATH_SERDC0_TXIDLE);
-
- ipath_cdbg(VERBOSE, "Clearing lane resets and txidle "
- "(writing %llx)\n", (unsigned long long) val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
- /* be sure chip saw it */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- prev_val = val;
- if (val & INFINIPATH_XGXS_RESET)
- val &= ~INFINIPATH_XGXS_RESET;
- if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) &
- INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) {
- /* need to compensate for Tx inversion in partner */
- val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
- INFINIPATH_XGXS_RX_POL_SHIFT);
- val |= dd->ipath_rx_pol_inv <<
- INFINIPATH_XGXS_RX_POL_SHIFT;
- }
- if (val != prev_val)
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
-
- /* clear current and de-emphasis bits */
- config1 &= ~0x0ffffffff00ULL;
- /* set current to 20ma */
- config1 |= 0x00000000000ULL;
- /* set de-emphasis to -5.68dB */
- config1 |= 0x0cccc000000ULL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig1, config1);
-
- ipath_cdbg(VERBOSE, "done: SerDes status config0=%llx "
- "config1=%llx, sstatus=%llx xgxs=%llx\n",
- (unsigned long long) val, (unsigned long long) config1,
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesstatus),
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
- return ret;
-}
-
-/**
- * ipath_pe_quiet_serdes - set serdes to txidle
- * @dd: the infinipath device
- * Called when driver is being unloaded
- */
-static void ipath_pe_quiet_serdes(struct ipath_devdata *dd)
-{
- u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
-
- if (dd->ibsymdelta || dd->iblnkerrdelta ||
- dd->ibdeltainprog) {
- u64 diagc;
- /* enable counter writes */
- diagc = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwdiagctrl);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl,
- diagc | INFINIPATH_DC_COUNTERWREN);
-
- if (dd->ibsymdelta || dd->ibdeltainprog) {
- val = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt);
- if (dd->ibdeltainprog)
- val -= val - dd->ibsymsnap;
- val -= dd->ibsymdelta;
- ipath_write_creg(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt, val);
- }
- if (dd->iblnkerrdelta || dd->ibdeltainprog) {
- val = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- if (dd->ibdeltainprog)
- val -= val - dd->iblnkerrsnap;
- val -= dd->iblnkerrdelta;
- ipath_write_creg(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt, val);
- }
-
- /* and disable counter writes */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl, diagc);
- }
- val |= INFINIPATH_SERDC0_TXIDLE;
- ipath_dbg("Setting TxIdleEn on serdes (config0 = %llx)\n",
- (unsigned long long) val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val);
-}
-
-static int ipath_pe_intconfig(struct ipath_devdata *dd)
-{
- u32 chiprev;
-
- /*
- * If the chip supports added error indication via GPIO pins,
- * enable interrupts on those bits so the interrupt routine
- * can count the events. Also set flag so interrupt routine
- * can know they are expected.
- */
- chiprev = dd->ipath_revision >> INFINIPATH_R_CHIPREVMINOR_SHIFT;
- if ((chiprev & INFINIPATH_R_CHIPREVMINOR_MASK) > 1) {
- /* Rev2+ reports extra errors via internal GPIO pins */
- dd->ipath_flags |= IPATH_GPIO_ERRINTRS;
- dd->ipath_gpio_mask |= IPATH_GPIO_ERRINTR_MASK;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_mask,
- dd->ipath_gpio_mask);
- }
- return 0;
-}
-
-/**
- * ipath_setup_pe_setextled - set the state of the two external LEDs
- * @dd: the infinipath device
- * @lst: the L state
- * @ltst: the LT state
-
- * These LEDs indicate the physical and logical state of IB link.
- * For this chip (at least with recommended board pinouts), LED1
- * is Yellow (logical state) and LED2 is Green (physical state),
- *
- * Note: We try to match the Mellanox HCA LED behavior as best
- * we can. Green indicates physical link state is OK (something is
- * plugged in, and we can train).
- * Amber indicates the link is logically up (ACTIVE).
- * Mellanox further blinks the amber LED to indicate data packet
- * activity, but we have no hardware support for that, so it would
- * require waking up every 10-20 msecs and checking the counters
- * on the chip, and then turning the LED off if appropriate. That's
- * visible overhead, so not something we will do.
- *
- */
-static void ipath_setup_pe_setextled(struct ipath_devdata *dd, u64 lst,
- u64 ltst)
-{
- u64 extctl;
- unsigned long flags = 0;
-
- /* the diags use the LED to indicate diag info, so we leave
- * the external LED alone when the diags are running */
- if (ipath_diag_inuse)
- return;
-
- /* Allow override of LED display for, e.g. Locating system in rack */
- if (dd->ipath_led_override) {
- ltst = (dd->ipath_led_override & IPATH_LED_PHYS)
- ? INFINIPATH_IBCS_LT_STATE_LINKUP
- : INFINIPATH_IBCS_LT_STATE_DISABLED;
- lst = (dd->ipath_led_override & IPATH_LED_LOG)
- ? INFINIPATH_IBCS_L_STATE_ACTIVE
- : INFINIPATH_IBCS_L_STATE_DOWN;
- }
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- extctl = dd->ipath_extctrl & ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
- INFINIPATH_EXTC_LED2PRIPORT_ON);
-
- if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
- extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
- if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
- extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
- dd->ipath_extctrl = extctl;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-}
-
-/**
- * ipath_setup_pe_cleanup - clean up any per-chip chip-specific stuff
- * @dd: the infinipath device
- *
- * This is called during driver unload.
- * We do the pci_disable_msi here, not in generic code, because it
- * isn't used for the HT chips. If we do end up needing pci_enable_msi
- * at some point in the future for HT, we'll move the call back
- * into the main init_one code.
- */
-static void ipath_setup_pe_cleanup(struct ipath_devdata *dd)
-{
- dd->ipath_msi_lo = 0; /* just in case unload fails */
- pci_disable_msi(dd->pcidev);
-}
-
-static void ipath_6120_pcie_params(struct ipath_devdata *dd)
-{
- u16 linkstat, speed;
- int pos;
-
- pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP);
- if (!pos) {
- ipath_dev_err(dd, "Can't find PCI Express capability!\n");
- goto bail;
- }
-
- pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA,
- &linkstat);
- /*
- * speed is bits 0-4, linkwidth is bits 4-8
- * no defines for them in headers
- */
- speed = linkstat & 0xf;
- linkstat >>= 4;
- linkstat &= 0x1f;
- dd->ipath_lbus_width = linkstat;
-
- switch (speed) {
- case 1:
- dd->ipath_lbus_speed = 2500; /* Gen1, 2.5GHz */
- break;
- case 2:
- dd->ipath_lbus_speed = 5000; /* Gen1, 5GHz */
- break;
- default: /* not defined, assume gen1 */
- dd->ipath_lbus_speed = 2500;
- break;
- }
-
- if (linkstat < 8)
- ipath_dev_err(dd,
- "PCIe width %u (x8 HCA), performance reduced\n",
- linkstat);
- else
- ipath_cdbg(VERBOSE, "PCIe speed %u width %u (x8 HCA)\n",
- dd->ipath_lbus_speed, linkstat);
-
- if (speed != 1)
- ipath_dev_err(dd,
- "PCIe linkspeed %u is incorrect; "
- "should be 1 (2500)!\n", speed);
-bail:
- /* fill in string, even on errors */
- snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
- "PCIe,%uMHz,x%u\n",
- dd->ipath_lbus_speed,
- dd->ipath_lbus_width);
-
- return;
-}
-
-/**
- * ipath_setup_pe_config - setup PCIe config related stuff
- * @dd: the infinipath device
- * @pdev: the PCI device
- *
- * The pci_enable_msi() call will fail on systems with MSI quirks
- * such as those with AMD8131, even if the device of interest is not
- * attached to that device, (in the 2.6.13 - 2.6.15 kernels, at least, fixed
- * late in 2.6.16).
- * All that can be done is to edit the kernel source to remove the quirk
- * check until that is fixed.
- * We do not need to call enable_msi() for our HyperTransport chip,
- * even though it uses MSI, and we want to avoid the quirk warning, so
- * So we call enable_msi only for PCIe. If we do end up needing
- * pci_enable_msi at some point in the future for HT, we'll move the
- * call back into the main init_one code.
- * We save the msi lo and hi values, so we can restore them after
- * chip reset (the kernel PCI infrastructure doesn't yet handle that
- * correctly).
- */
-static int ipath_setup_pe_config(struct ipath_devdata *dd,
- struct pci_dev *pdev)
-{
- int pos, ret;
-
- dd->ipath_msi_lo = 0; /* used as a flag during reset processing */
- ret = pci_enable_msi(dd->pcidev);
- if (ret)
- ipath_dev_err(dd, "pci_enable_msi failed: %d, "
- "interrupts may not work\n", ret);
- /* continue even if it fails, we may still be OK... */
- dd->ipath_irq = pdev->irq;
-
- if ((pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) {
- u16 control;
- pci_read_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO,
- &dd->ipath_msi_lo);
- pci_read_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI,
- &dd->ipath_msi_hi);
- pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS,
- &control);
- /* now save the data (vector) info */
- pci_read_config_word(dd->pcidev,
- pos + ((control & PCI_MSI_FLAGS_64BIT)
- ? 12 : 8),
- &dd->ipath_msi_data);
- ipath_cdbg(VERBOSE, "Read msi data 0x%x from config offset "
- "0x%x, control=0x%x\n", dd->ipath_msi_data,
- pos + ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8),
- control);
- /* we save the cachelinesize also, although it doesn't
- * really matter */
- pci_read_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE,
- &dd->ipath_pci_cacheline);
- } else
- ipath_dev_err(dd, "Can't find MSI capability, "
- "can't save MSI settings for reset\n");
-
- ipath_6120_pcie_params(dd);
-
- dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
- dd->ipath_link_speed_supported = IPATH_IB_SDR;
- dd->ipath_link_width_enabled = IB_WIDTH_4X;
- dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
- /* these can't change for this chip, so set once */
- dd->ipath_link_width_active = dd->ipath_link_width_enabled;
- dd->ipath_link_speed_active = dd->ipath_link_speed_enabled;
- return 0;
-}
-
-static void ipath_init_pe_variables(struct ipath_devdata *dd)
-{
- /*
- * setup the register offsets, since they are different for each
- * chip
- */
- dd->ipath_kregs = &ipath_pe_kregs;
- dd->ipath_cregs = &ipath_pe_cregs;
-
- /*
- * bits for selecting i2c direction and values,
- * used for I2C serial flash
- */
- dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
- dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
- dd->ipath_gpio_sda = IPATH_GPIO_SDA;
- dd->ipath_gpio_scl = IPATH_GPIO_SCL;
-
- /*
- * Fill in data for field-values that change in newer chips.
- * We dynamically specify only the mask for LINKTRAININGSTATE
- * and only the shift for LINKSTATE, as they are the only ones
- * that change. Also precalculate the 3 link states of interest
- * and the combined mask.
- */
- dd->ibcs_ls_shift = IBA6120_IBCS_LINKSTATE_SHIFT;
- dd->ibcs_lts_mask = IBA6120_IBCS_LINKTRAININGSTATE_MASK;
- dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
- dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
- dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
- dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
- dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
-
- /*
- * Fill in data for ibcc field-values that change in newer chips.
- * We dynamically specify only the mask for LINKINITCMD
- * and only the shift for LINKCMD and MAXPKTLEN, as they are
- * the only ones that change.
- */
- dd->ibcc_lic_mask = INFINIPATH_IBCC_LINKINITCMD_MASK;
- dd->ibcc_lc_shift = INFINIPATH_IBCC_LINKCMD_SHIFT;
- dd->ibcc_mpl_shift = INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
-
- /* Fill in shifts for RcvCtrl. */
- dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
- dd->ipath_r_intravail_shift = INFINIPATH_R_INTRAVAIL_SHIFT;
- dd->ipath_r_tailupd_shift = INFINIPATH_R_TAILUPD_SHIFT;
- dd->ipath_r_portcfg_shift = 0; /* Not on IBA6120 */
-
- /* variables for sanity checking interrupt and errors */
- dd->ipath_hwe_bitsextant =
- (INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) |
- INFINIPATH_HWE_PCIE1PLLFAILED |
- INFINIPATH_HWE_PCIE0PLLFAILED |
- INFINIPATH_HWE_PCIEPOISONEDTLP |
- INFINIPATH_HWE_PCIECPLTIMEOUT |
- INFINIPATH_HWE_PCIEBUSPARITYXTLH |
- INFINIPATH_HWE_PCIEBUSPARITYXADM |
- INFINIPATH_HWE_PCIEBUSPARITYRADM |
- INFINIPATH_HWE_MEMBISTFAILED |
- INFINIPATH_HWE_COREPLL_FBSLIP |
- INFINIPATH_HWE_COREPLL_RFSLIP |
- INFINIPATH_HWE_SERDESPLLFAILED |
- INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
- INFINIPATH_HWE_IBCBUSFRSPCPARITYERR;
- dd->ipath_i_bitsextant =
- (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
- (INFINIPATH_I_RCVAVAIL_MASK <<
- INFINIPATH_I_RCVAVAIL_SHIFT) |
- INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
- INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO;
- dd->ipath_e_bitsextant =
- INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
- INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
- INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
- INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
- INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
- INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
- INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
- INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
- INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SMAXPKTLEN |
- INFINIPATH_E_SUNDERRUN | INFINIPATH_E_SPKTLEN |
- INFINIPATH_E_SDROPPEDSMPPKT | INFINIPATH_E_SDROPPEDDATAPKT |
- INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
- INFINIPATH_E_SUNSUPVL | INFINIPATH_E_IBSTATUSCHANGED |
- INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET |
- INFINIPATH_E_HARDWARE;
-
- dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
- dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
- dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
- dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
-
- /*
- * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
- * 2 is Some Misc, 3 is reserved for future.
- */
- dd->ipath_eep_st_masks[0].hwerrs_to_log =
- INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT;
-
- /* Ignore errors in PIO/PBC on systems with unordered write-combining */
- if (ipath_unordered_wc())
- dd->ipath_eep_st_masks[0].hwerrs_to_log &= ~TXE_PIO_PARITY;
-
- dd->ipath_eep_st_masks[1].hwerrs_to_log =
- INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
-
- dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
- dd->delay_mult = 2; /* SDR, 4X, can't change */
-}
-
-/* setup the MSI stuff again after a reset. I'd like to just call
- * pci_enable_msi() and request_irq() again, but when I do that,
- * the MSI enable bit doesn't get set in the command word, and
- * we switch to to a different interrupt vector, which is confusing,
- * so I instead just do it all inline. Perhaps somehow can tie this
- * into the PCIe hotplug support at some point
- * Note, because I'm doing it all here, I don't call pci_disable_msi()
- * or free_irq() at the start of ipath_setup_pe_reset().
- */
-static int ipath_reinit_msi(struct ipath_devdata *dd)
-{
- int pos;
- u16 control;
- int ret;
-
- if (!dd->ipath_msi_lo) {
- dev_info(&dd->pcidev->dev, "Can't restore MSI config, "
- "initial setup failed?\n");
- ret = 0;
- goto bail;
- }
-
- if (!(pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI))) {
- ipath_dev_err(dd, "Can't find MSI capability, "
- "can't restore MSI settings\n");
- ret = 0;
- goto bail;
- }
- ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n",
- dd->ipath_msi_lo, pos + PCI_MSI_ADDRESS_LO);
- pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO,
- dd->ipath_msi_lo);
- ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n",
- dd->ipath_msi_hi, pos + PCI_MSI_ADDRESS_HI);
- pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI,
- dd->ipath_msi_hi);
- pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, &control);
- if (!(control & PCI_MSI_FLAGS_ENABLE)) {
- ipath_cdbg(VERBOSE, "MSI control at off %x was %x, "
- "setting MSI enable (%x)\n", pos + PCI_MSI_FLAGS,
- control, control | PCI_MSI_FLAGS_ENABLE);
- control |= PCI_MSI_FLAGS_ENABLE;
- pci_write_config_word(dd->pcidev, pos + PCI_MSI_FLAGS,
- control);
- }
- /* now rewrite the data (vector) info */
- pci_write_config_word(dd->pcidev, pos +
- ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8),
- dd->ipath_msi_data);
- /* we restore the cachelinesize also, although it doesn't really
- * matter */
- pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE,
- dd->ipath_pci_cacheline);
- /* and now set the pci master bit again */
- pci_set_master(dd->pcidev);
- ret = 1;
-
-bail:
- return ret;
-}
-
-/* This routine sleeps, so it can only be called from user context, not
- * from interrupt context. If we need interrupt context, we can split
- * it into two routines.
-*/
-static int ipath_setup_pe_reset(struct ipath_devdata *dd)
-{
- u64 val;
- int i;
- int ret;
- u16 cmdval;
-
- pci_read_config_word(dd->pcidev, PCI_COMMAND, &cmdval);
-
- /* Use ERROR so it shows up in logs, etc. */
- ipath_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->ipath_unit);
- /* keep chip from being accessed in a few places */
- dd->ipath_flags &= ~(IPATH_INITTED|IPATH_PRESENT);
- val = dd->ipath_control | INFINIPATH_C_RESET;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val);
- mb();
-
- for (i = 1; i <= 5; i++) {
- int r;
- /* allow MBIST, etc. to complete; longer on each retry.
- * We sometimes get machine checks from bus timeout if no
- * response, so for now, make it *really* long.
- */
- msleep(1000 + (1 + i) * 2000);
- if ((r =
- pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0,
- dd->ipath_pcibar0)))
- ipath_dev_err(dd, "rewrite of BAR0 failed: %d\n",
- r);
- if ((r =
- pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1,
- dd->ipath_pcibar1)))
- ipath_dev_err(dd, "rewrite of BAR1 failed: %d\n",
- r);
- /* now re-enable memory access */
- pci_write_config_word(dd->pcidev, PCI_COMMAND, cmdval);
- if ((r = pci_enable_device(dd->pcidev)))
- ipath_dev_err(dd, "pci_enable_device failed after "
- "reset: %d\n", r);
- /*
- * whether it fully enabled or not, mark as present,
- * again (but not INITTED)
- */
- dd->ipath_flags |= IPATH_PRESENT;
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
- if (val == dd->ipath_revision) {
- ipath_cdbg(VERBOSE, "Got matching revision "
- "register %llx on try %d\n",
- (unsigned long long) val, i);
- ret = ipath_reinit_msi(dd);
- goto bail;
- }
- /* Probably getting -1 back */
- ipath_dbg("Didn't get expected revision register, "
- "got %llx, try %d\n", (unsigned long long) val,
- i + 1);
- }
- ret = 0; /* failed */
-
-bail:
- if (ret)
- ipath_6120_pcie_params(dd);
- return ret;
-}
-
-/**
- * ipath_pe_put_tid - write a TID in chip
- * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to update
- * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
- * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
- *
- * This exists as a separate routine to allow for special locking etc.
- * It's used for both the full cleanup on exit, as well as the normal
- * setup and teardown.
- */
-static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
- u32 type, unsigned long pa)
-{
- u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
- unsigned long flags = 0; /* keep gcc quiet */
- int tidx;
- spinlock_t *tidlockp;
-
- if (!dd->ipath_kregbase)
- return;
-
- if (pa != dd->ipath_tidinvalid) {
- if (pa & ((1U << 11) - 1)) {
- dev_info(&dd->pcidev->dev, "BUG: physaddr %lx "
- "not 2KB aligned!\n", pa);
- return;
- }
- pa >>= 11;
- /* paranoia check */
- if (pa & ~INFINIPATH_RT_ADDR_MASK)
- ipath_dev_err(dd,
- "BUG: Physical page address 0x%lx "
- "has bits set in 31-29\n", pa);
-
- if (type == RCVHQ_RCV_TYPE_EAGER)
- pa |= dd->ipath_tidtemplate;
- else /* for now, always full 4KB page */
- pa |= 2 << 29;
- }
-
- /*
- * Workaround chip bug 9437 by writing the scratch register
- * before and after the TID, and with an io write barrier.
- * We use a spinlock around the writes, so they can't intermix
- * with other TID (eager or expected) writes (the chip bug
- * is triggered by back to back TID writes). Unfortunately, this
- * call can be done from interrupt level for the port 0 eager TIDs,
- * so we have to use irqsave locks.
- */
- /*
- * Assumes tidptr always > ipath_egrtidbase
- * if type == RCVHQ_RCV_TYPE_EAGER.
- */
- tidx = tidptr - dd->ipath_egrtidbase;
-
- tidlockp = (type == RCVHQ_RCV_TYPE_EAGER && tidx < dd->ipath_rcvegrcnt)
- ? &dd->ipath_kernel_tid_lock : &dd->ipath_user_tid_lock;
- spin_lock_irqsave(tidlockp, flags);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xfeeddeaf);
- writel(pa, tidp32);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xdeadbeef);
- mmiowb();
- spin_unlock_irqrestore(tidlockp, flags);
-}
-
-/**
- * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher
- * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to update
- * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
- * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
- *
- * This exists as a separate routine to allow for selection of the
- * appropriate "flavor". The static calls in cleanup just use the
- * revision-agnostic form, as they are not performance critical.
- */
-static void ipath_pe_put_tid_2(struct ipath_devdata *dd, u64 __iomem *tidptr,
- u32 type, unsigned long pa)
-{
- u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
- u32 tidx;
-
- if (!dd->ipath_kregbase)
- return;
-
- if (pa != dd->ipath_tidinvalid) {
- if (pa & ((1U << 11) - 1)) {
- dev_info(&dd->pcidev->dev, "BUG: physaddr %lx "
- "not 2KB aligned!\n", pa);
- return;
- }
- pa >>= 11;
- /* paranoia check */
- if (pa & ~INFINIPATH_RT_ADDR_MASK)
- ipath_dev_err(dd,
- "BUG: Physical page address 0x%lx "
- "has bits set in 31-29\n", pa);
-
- if (type == RCVHQ_RCV_TYPE_EAGER)
- pa |= dd->ipath_tidtemplate;
- else /* for now, always full 4KB page */
- pa |= 2 << 29;
- }
- tidx = tidptr - dd->ipath_egrtidbase;
- writel(pa, tidp32);
- mmiowb();
-}
-
-
-/**
- * ipath_pe_clear_tid - clear all TID entries for a port, expected and eager
- * @dd: the infinipath device
- * @port: the port
- *
- * clear all TID entries for a port, expected and eager.
- * Used from ipath_close(). On this chip, TIDs are only 32 bits,
- * not 64, but they are still on 64 bit boundaries, so tidbase
- * is declared as u64 * for the pointer math, even though we write 32 bits
- */
-static void ipath_pe_clear_tids(struct ipath_devdata *dd, unsigned port)
-{
- u64 __iomem *tidbase;
- unsigned long tidinv;
- int i;
-
- if (!dd->ipath_kregbase)
- return;
-
- ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
-
- tidinv = dd->ipath_tidinvalid;
- tidbase = (u64 __iomem *)
- ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- port * dd->ipath_rcvtidcnt * sizeof(*tidbase));
-
- for (i = 0; i < dd->ipath_rcvtidcnt; i++)
- dd->ipath_f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
- tidinv);
-
- tidbase = (u64 __iomem *)
- ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvegrbase +
- port * dd->ipath_rcvegrcnt * sizeof(*tidbase));
-
- for (i = 0; i < dd->ipath_rcvegrcnt; i++)
- dd->ipath_f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
- tidinv);
-}
-
-/**
- * ipath_pe_tidtemplate - setup constants for TID updates
- * @dd: the infinipath device
- *
- * We setup stuff that we use a lot, to avoid calculating each time
- */
-static void ipath_pe_tidtemplate(struct ipath_devdata *dd)
-{
- u32 egrsize = dd->ipath_rcvegrbufsize;
-
- /* For now, we always allocate 4KB buffers (at init) so we can
- * receive max size packets. We may want a module parameter to
- * specify 2KB or 4KB and/or make be per port instead of per device
- * for those who want to reduce memory footprint. Note that the
- * ipath_rcvhdrentsize size must be large enough to hold the largest
- * IB header (currently 96 bytes) that we expect to handle (plus of
- * course the 2 dwords of RHF).
- */
- if (egrsize == 2048)
- dd->ipath_tidtemplate = 1U << 29;
- else if (egrsize == 4096)
- dd->ipath_tidtemplate = 2U << 29;
- else {
- egrsize = 4096;
- dev_info(&dd->pcidev->dev, "BUG: unsupported egrbufsize "
- "%u, using %u\n", dd->ipath_rcvegrbufsize,
- egrsize);
- dd->ipath_tidtemplate = 2U << 29;
- }
- dd->ipath_tidinvalid = 0;
-}
-
-static int ipath_pe_early_init(struct ipath_devdata *dd)
-{
- dd->ipath_flags |= IPATH_4BYTE_TID;
- if (ipath_unordered_wc())
- dd->ipath_flags |= IPATH_PIO_FLUSH_WC;
-
- /*
- * For openfabrics, we need to be able to handle an IB header of
- * 24 dwords. HT chip has arbitrary sized receive buffers, so we
- * made them the same size as the PIO buffers. This chip does not
- * handle arbitrary size buffers, so we need the header large enough
- * to handle largest IB header, but still have room for a 2KB MTU
- * standard IB packet.
- */
- dd->ipath_rcvhdrentsize = 24;
- dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
- dd->ipath_rhf_offset = 0;
- dd->ipath_egrtidbase = (u64 __iomem *)
- ((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase);
-
- dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048;
- /*
- * the min() check here is currently a nop, but it may not always
- * be, depending on just how we do ipath_rcvegrbufsize
- */
- dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k :
- dd->ipath_piosize2k,
- dd->ipath_rcvegrbufsize +
- (dd->ipath_rcvhdrentsize << 2));
- dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
-
- /*
- * We can request a receive interrupt for 1 or
- * more packets from current offset. For now, we set this
- * up for a single packet.
- */
- dd->ipath_rhdrhead_intr_off = 1ULL<<32;
-
- ipath_get_eeprom_info(dd);
-
- return 0;
-}
-
-int __attribute__((weak)) ipath_unordered_wc(void)
-{
- return 0;
-}
-
-/**
- * ipath_init_pe_get_base_info - set chip-specific flags for user code
- * @pd: the infinipath port
- * @kbase: ipath_base_info pointer
- *
- * We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithms.
- */
-static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase)
-{
- struct ipath_base_info *kinfo = kbase;
- struct ipath_devdata *dd;
-
- if (ipath_unordered_wc()) {
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_FORCE_WC_ORDER;
- ipath_cdbg(PROC, "Intel processor, forcing WC order\n");
- }
- else
- ipath_cdbg(PROC, "Not Intel processor, WC ordered\n");
-
- if (pd == NULL)
- goto done;
-
- dd = pd->port_dd;
-
-done:
- kinfo->spi_runtime_flags |= IPATH_RUNTIME_PCIE |
- IPATH_RUNTIME_FORCE_PIOAVAIL | IPATH_RUNTIME_PIO_REGSWAPPED;
- return 0;
-}
-
-static void ipath_pe_free_irq(struct ipath_devdata *dd)
-{
- free_irq(dd->ipath_irq, dd);
- dd->ipath_irq = 0;
-}
-
-
-static struct ipath_message_header *
-ipath_pe_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
-{
- return (struct ipath_message_header *)
- &rhf_addr[sizeof(u64) / sizeof(u32)];
-}
-
-static void ipath_pe_config_ports(struct ipath_devdata *dd, ushort cfgports)
-{
- dd->ipath_portcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
- dd->ipath_p0_rcvegrcnt =
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvegrcnt);
-}
-
-static void ipath_pe_read_counters(struct ipath_devdata *dd,
- struct infinipath_counters *cntrs)
-{
- cntrs->LBIntCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBIntCnt));
- cntrs->LBFlowStallCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(LBFlowStallCnt));
- cntrs->TxSDmaDescCnt = 0;
- cntrs->TxUnsupVLErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnsupVLErrCnt));
- cntrs->TxDataPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDataPktCnt));
- cntrs->TxFlowPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowPktCnt));
- cntrs->TxDwordCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDwordCnt));
- cntrs->TxLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxLenErrCnt));
- cntrs->TxMaxMinLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxMaxMinLenErrCnt));
- cntrs->TxUnderrunCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxUnderrunCnt));
- cntrs->TxFlowStallCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxFlowStallCnt));
- cntrs->TxDroppedPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(TxDroppedPktCnt));
- cntrs->RxDroppedPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDroppedPktCnt));
- cntrs->RxDataPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDataPktCnt));
- cntrs->RxFlowPktCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowPktCnt));
- cntrs->RxDwordCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxDwordCnt));
- cntrs->RxLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLenErrCnt));
- cntrs->RxMaxMinLenErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxMaxMinLenErrCnt));
- cntrs->RxICRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxICRCErrCnt));
- cntrs->RxVCRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxVCRCErrCnt));
- cntrs->RxFlowCtrlErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxFlowCtrlErrCnt));
- cntrs->RxBadFormatCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBadFormatCnt));
- cntrs->RxLinkProblemCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLinkProblemCnt));
- cntrs->RxEBPCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxEBPCnt));
- cntrs->RxLPCRCErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxLPCRCErrCnt));
- cntrs->RxBufOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxBufOvflCnt));
- cntrs->RxTIDFullErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDFullErrCnt));
- cntrs->RxTIDValidErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxTIDValidErrCnt));
- cntrs->RxPKeyMismatchCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxPKeyMismatchCnt));
- cntrs->RxP0HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt));
- cntrs->RxP1HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP1HdrEgrOvflCnt));
- cntrs->RxP2HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP2HdrEgrOvflCnt));
- cntrs->RxP3HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP3HdrEgrOvflCnt));
- cntrs->RxP4HdrEgrOvflCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(RxP4HdrEgrOvflCnt));
- cntrs->RxP5HdrEgrOvflCnt = 0;
- cntrs->RxP6HdrEgrOvflCnt = 0;
- cntrs->RxP7HdrEgrOvflCnt = 0;
- cntrs->RxP8HdrEgrOvflCnt = 0;
- cntrs->RxP9HdrEgrOvflCnt = 0;
- cntrs->RxP10HdrEgrOvflCnt = 0;
- cntrs->RxP11HdrEgrOvflCnt = 0;
- cntrs->RxP12HdrEgrOvflCnt = 0;
- cntrs->RxP13HdrEgrOvflCnt = 0;
- cntrs->RxP14HdrEgrOvflCnt = 0;
- cntrs->RxP15HdrEgrOvflCnt = 0;
- cntrs->RxP16HdrEgrOvflCnt = 0;
- cntrs->IBStatusChangeCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBStatusChangeCnt));
- cntrs->IBLinkErrRecoveryCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt));
- cntrs->IBLinkDownedCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBLinkDownedCnt));
- cntrs->IBSymbolErrCnt =
- ipath_snap_cntr(dd, IPATH_CREG_OFFSET(IBSymbolErrCnt));
- cntrs->RxVL15DroppedPktCnt = 0;
- cntrs->RxOtherLocalPhyErrCnt = 0;
- cntrs->PcieRetryBufDiagQwordCnt = 0;
- cntrs->ExcessBufferOvflCnt = dd->ipath_overrun_thresh_errs;
- cntrs->LocalLinkIntegrityErrCnt = dd->ipath_lli_errs;
- cntrs->RxVlErrCnt = 0;
- cntrs->RxDlidFltrCnt = 0;
-}
-
-
-/* no interrupt fallback for these chips */
-static int ipath_pe_nointr_fallback(struct ipath_devdata *dd)
-{
- return 0;
-}
-
-
-/*
- * reset the XGXS (between serdes and IBC). Slightly less intrusive
- * than resetting the IBC or external link state, and useful in some
- * cases to cause some retraining. To do this right, we reset IBC
- * as well.
- */
-static void ipath_pe_xgxs_reset(struct ipath_devdata *dd)
-{
- u64 val, prev_val;
-
- prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- val = prev_val | INFINIPATH_XGXS_RESET;
- prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
-}
-
-
-static int ipath_pe_get_ib_cfg(struct ipath_devdata *dd, int which)
-{
- int ret;
-
- switch (which) {
- case IPATH_IB_CFG_LWID:
- ret = dd->ipath_link_width_active;
- break;
- case IPATH_IB_CFG_SPD:
- ret = dd->ipath_link_speed_active;
- break;
- case IPATH_IB_CFG_LWID_ENB:
- ret = dd->ipath_link_width_enabled;
- break;
- case IPATH_IB_CFG_SPD_ENB:
- ret = dd->ipath_link_speed_enabled;
- break;
- default:
- ret = -ENOTSUPP;
- break;
- }
- return ret;
-}
-
-
-/* we assume range checking is already done, if needed */
-static int ipath_pe_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
-{
- int ret = 0;
-
- if (which == IPATH_IB_CFG_LWID_ENB)
- dd->ipath_link_width_enabled = val;
- else if (which == IPATH_IB_CFG_SPD_ENB)
- dd->ipath_link_speed_enabled = val;
- else
- ret = -ENOTSUPP;
- return ret;
-}
-
-static void ipath_pe_config_jint(struct ipath_devdata *dd, u16 a, u16 b)
-{
-}
-
-
-static int ipath_pe_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
-{
- if (ibup) {
- if (dd->ibdeltainprog) {
- dd->ibdeltainprog = 0;
- dd->ibsymdelta +=
- ipath_read_creg32(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt) -
- dd->ibsymsnap;
- dd->iblnkerrdelta +=
- ipath_read_creg32(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt) -
- dd->iblnkerrsnap;
- }
- } else {
- dd->ipath_lli_counter = 0;
- if (!dd->ibdeltainprog) {
- dd->ibdeltainprog = 1;
- dd->ibsymsnap =
- ipath_read_creg32(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt);
- dd->iblnkerrsnap =
- ipath_read_creg32(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- }
- }
-
- ipath_setup_pe_setextled(dd, ipath_ib_linkstate(dd, ibcs),
- ipath_ib_linktrstate(dd, ibcs));
- return 0;
-}
-
-
-/**
- * ipath_init_iba6120_funcs - set up the chip-specific function pointers
- * @dd: the infinipath device
- *
- * This is global, and is called directly at init to set up the
- * chip-specific function pointers for later use.
- */
-void ipath_init_iba6120_funcs(struct ipath_devdata *dd)
-{
- dd->ipath_f_intrsetup = ipath_pe_intconfig;
- dd->ipath_f_bus = ipath_setup_pe_config;
- dd->ipath_f_reset = ipath_setup_pe_reset;
- dd->ipath_f_get_boardname = ipath_pe_boardname;
- dd->ipath_f_init_hwerrors = ipath_pe_init_hwerrors;
- dd->ipath_f_early_init = ipath_pe_early_init;
- dd->ipath_f_handle_hwerrors = ipath_pe_handle_hwerrors;
- dd->ipath_f_quiet_serdes = ipath_pe_quiet_serdes;
- dd->ipath_f_bringup_serdes = ipath_pe_bringup_serdes;
- dd->ipath_f_clear_tids = ipath_pe_clear_tids;
- /*
- * _f_put_tid may get changed after we read the chip revision,
- * but we start with the safe version for all revs
- */
- dd->ipath_f_put_tid = ipath_pe_put_tid;
- dd->ipath_f_cleanup = ipath_setup_pe_cleanup;
- dd->ipath_f_setextled = ipath_setup_pe_setextled;
- dd->ipath_f_get_base_info = ipath_pe_get_base_info;
- dd->ipath_f_free_irq = ipath_pe_free_irq;
- dd->ipath_f_tidtemplate = ipath_pe_tidtemplate;
- dd->ipath_f_intr_fallback = ipath_pe_nointr_fallback;
- dd->ipath_f_xgxs_reset = ipath_pe_xgxs_reset;
- dd->ipath_f_get_msgheader = ipath_pe_get_msgheader;
- dd->ipath_f_config_ports = ipath_pe_config_ports;
- dd->ipath_f_read_counters = ipath_pe_read_counters;
- dd->ipath_f_get_ib_cfg = ipath_pe_get_ib_cfg;
- dd->ipath_f_set_ib_cfg = ipath_pe_set_ib_cfg;
- dd->ipath_f_config_jint = ipath_pe_config_jint;
- dd->ipath_f_ib_updown = ipath_pe_ib_updown;
-
-
- /* initialize chip-specific variables */
- ipath_init_pe_variables(dd);
-}
-
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-/*
- * This file contains all of the code that is specific to the
- * InfiniPath 7220 chip (except that specific to the SerDes)
- */
-
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <rdma/ib_verbs.h>
-
-#include "ipath_kernel.h"
-#include "ipath_registers.h"
-#include "ipath_7220.h"
-
-static void ipath_setup_7220_setextled(struct ipath_devdata *, u64, u64);
-
-static unsigned ipath_compat_ddr_negotiate = 1;
-
-module_param_named(compat_ddr_negotiate, ipath_compat_ddr_negotiate, uint,
- S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(compat_ddr_negotiate,
- "Attempt pre-IBTA 1.2 DDR speed negotiation");
-
-static unsigned ipath_sdma_fetch_arb = 1;
-module_param_named(fetch_arb, ipath_sdma_fetch_arb, uint, S_IRUGO);
-MODULE_PARM_DESC(fetch_arb, "IBA7220: change SDMA descriptor arbitration");
-
-/*
- * This file contains almost all the chip-specific register information and
- * access functions for the QLogic InfiniPath 7220 PCI-Express chip, with the
- * exception of SerDes support, which in in ipath_sd7220.c.
- *
- * This lists the InfiniPath registers, in the actual chip layout.
- * This structure should never be directly accessed.
- */
-struct _infinipath_do_not_use_kernel_regs {
- unsigned long long Revision;
- unsigned long long Control;
- unsigned long long PageAlign;
- unsigned long long PortCnt;
- unsigned long long DebugPortSelect;
- unsigned long long DebugSigsIntSel; /* was Reserved0;*/
- unsigned long long SendRegBase;
- unsigned long long UserRegBase;
- unsigned long long CounterRegBase;
- unsigned long long Scratch;
- unsigned long long EEPROMAddrCmd; /* was Reserved1; */
- unsigned long long EEPROMData; /* was Reserved2; */
- unsigned long long IntBlocked;
- unsigned long long IntMask;
- unsigned long long IntStatus;
- unsigned long long IntClear;
- unsigned long long ErrorMask;
- unsigned long long ErrorStatus;
- unsigned long long ErrorClear;
- unsigned long long HwErrMask;
- unsigned long long HwErrStatus;
- unsigned long long HwErrClear;
- unsigned long long HwDiagCtrl;
- unsigned long long MDIO;
- unsigned long long IBCStatus;
- unsigned long long IBCCtrl;
- unsigned long long ExtStatus;
- unsigned long long ExtCtrl;
- unsigned long long GPIOOut;
- unsigned long long GPIOMask;
- unsigned long long GPIOStatus;
- unsigned long long GPIOClear;
- unsigned long long RcvCtrl;
- unsigned long long RcvBTHQP;
- unsigned long long RcvHdrSize;
- unsigned long long RcvHdrCnt;
- unsigned long long RcvHdrEntSize;
- unsigned long long RcvTIDBase;
- unsigned long long RcvTIDCnt;
- unsigned long long RcvEgrBase;
- unsigned long long RcvEgrCnt;
- unsigned long long RcvBufBase;
- unsigned long long RcvBufSize;
- unsigned long long RxIntMemBase;
- unsigned long long RxIntMemSize;
- unsigned long long RcvPartitionKey;
- unsigned long long RcvQPMulticastPort;
- unsigned long long RcvPktLEDCnt;
- unsigned long long IBCDDRCtrl;
- unsigned long long HRTBT_GUID;
- unsigned long long IB_SDTEST_IF_TX;
- unsigned long long IB_SDTEST_IF_RX;
- unsigned long long IBCDDRCtrl2;
- unsigned long long IBCDDRStatus;
- unsigned long long JIntReload;
- unsigned long long IBNCModeCtrl;
- unsigned long long SendCtrl;
- unsigned long long SendBufBase;
- unsigned long long SendBufSize;
- unsigned long long SendBufCnt;
- unsigned long long SendAvailAddr;
- unsigned long long TxIntMemBase;
- unsigned long long TxIntMemSize;
- unsigned long long SendDmaBase;
- unsigned long long SendDmaLenGen;
- unsigned long long SendDmaTail;
- unsigned long long SendDmaHead;
- unsigned long long SendDmaHeadAddr;
- unsigned long long SendDmaBufMask0;
- unsigned long long SendDmaBufMask1;
- unsigned long long SendDmaBufMask2;
- unsigned long long SendDmaStatus;
- unsigned long long SendBufferError;
- unsigned long long SendBufferErrorCONT1;
- unsigned long long SendBufErr2; /* was Reserved6SBE[0/6] */
- unsigned long long Reserved6L[2];
- unsigned long long AvailUpdCount;
- unsigned long long RcvHdrAddr0;
- unsigned long long RcvHdrAddrs[16]; /* Why enumerate? */
- unsigned long long Reserved7hdtl; /* Align next to 300 */
- unsigned long long RcvHdrTailAddr0; /* 300, like others */
- unsigned long long RcvHdrTailAddrs[16];
- unsigned long long Reserved9SW[7]; /* was [8]; we have 17 ports */
- unsigned long long IbsdEpbAccCtl; /* IB Serdes EPB access control */
- unsigned long long IbsdEpbTransReg; /* IB Serdes EPB Transaction */
- unsigned long long Reserved10sds; /* was SerdesStatus on */
- unsigned long long XGXSConfig;
- unsigned long long IBSerDesCtrl; /* Was IBPLLCfg on Monty */
- unsigned long long EEPCtlStat; /* for "boot" EEPROM/FLASH */
- unsigned long long EEPAddrCmd;
- unsigned long long EEPData;
- unsigned long long PcieEpbAccCtl;
- unsigned long long PcieEpbTransCtl;
- unsigned long long EfuseCtl; /* E-Fuse control */
- unsigned long long EfuseData[4];
- unsigned long long ProcMon;
- /* this chip moves following two from previous 200, 208 */
- unsigned long long PCIeRBufTestReg0;
- unsigned long long PCIeRBufTestReg1;
- /* added for this chip */
- unsigned long long PCIeRBufTestReg2;
- unsigned long long PCIeRBufTestReg3;
- /* added for this chip, debug only */
- unsigned long long SPC_JTAG_ACCESS_REG;
- unsigned long long LAControlReg;
- unsigned long long GPIODebugSelReg;
- unsigned long long DebugPortValueReg;
- /* added for this chip, DMA */
- unsigned long long SendDmaBufUsed[3];
- unsigned long long SendDmaReqTagUsed;
- /*
- * added for this chip, EFUSE: note that these program 64-bit
- * words 2 and 3 */
- unsigned long long efuse_pgm_data[2];
- unsigned long long Reserved11LAalign[10]; /* Skip 4B0..4F8 */
- /* we have 30 regs for DDS and RXEQ in IB SERDES */
- unsigned long long SerDesDDSRXEQ[30];
- unsigned long long Reserved12LAalign[2]; /* Skip 5F0, 5F8 */
- /* added for LA debug support */
- unsigned long long LAMemory[32];
-};
-
-struct _infinipath_do_not_use_counters {
- __u64 LBIntCnt;
- __u64 LBFlowStallCnt;
- __u64 TxSDmaDescCnt; /* was Reserved1 */
- __u64 TxUnsupVLErrCnt;
- __u64 TxDataPktCnt;
- __u64 TxFlowPktCnt;
- __u64 TxDwordCnt;
- __u64 TxLenErrCnt;
- __u64 TxMaxMinLenErrCnt;
- __u64 TxUnderrunCnt;
- __u64 TxFlowStallCnt;
- __u64 TxDroppedPktCnt;
- __u64 RxDroppedPktCnt;
- __u64 RxDataPktCnt;
- __u64 RxFlowPktCnt;
- __u64 RxDwordCnt;
- __u64 RxLenErrCnt;
- __u64 RxMaxMinLenErrCnt;
- __u64 RxICRCErrCnt;
- __u64 RxVCRCErrCnt;
- __u64 RxFlowCtrlErrCnt;
- __u64 RxBadFormatCnt;
- __u64 RxLinkProblemCnt;
- __u64 RxEBPCnt;
- __u64 RxLPCRCErrCnt;
- __u64 RxBufOvflCnt;
- __u64 RxTIDFullErrCnt;
- __u64 RxTIDValidErrCnt;
- __u64 RxPKeyMismatchCnt;
- __u64 RxP0HdrEgrOvflCnt;
- __u64 RxP1HdrEgrOvflCnt;
- __u64 RxP2HdrEgrOvflCnt;
- __u64 RxP3HdrEgrOvflCnt;
- __u64 RxP4HdrEgrOvflCnt;
- __u64 RxP5HdrEgrOvflCnt;
- __u64 RxP6HdrEgrOvflCnt;
- __u64 RxP7HdrEgrOvflCnt;
- __u64 RxP8HdrEgrOvflCnt;
- __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */
- __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */
- __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */
- __u64 IBStatusChangeCnt;
- __u64 IBLinkErrRecoveryCnt;
- __u64 IBLinkDownedCnt;
- __u64 IBSymbolErrCnt;
- /* The following are new for IBA7220 */
- __u64 RxVL15DroppedPktCnt;
- __u64 RxOtherLocalPhyErrCnt;
- __u64 PcieRetryBufDiagQwordCnt;
- __u64 ExcessBufferOvflCnt;
- __u64 LocalLinkIntegrityErrCnt;
- __u64 RxVlErrCnt;
- __u64 RxDlidFltrCnt;
- __u64 Reserved8[7];
- __u64 PSStat;
- __u64 PSStart;
- __u64 PSInterval;
- __u64 PSRcvDataCount;
- __u64 PSRcvPktsCount;
- __u64 PSXmitDataCount;
- __u64 PSXmitPktsCount;
- __u64 PSXmitWaitCount;
-};
-
-#define IPATH_KREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
-#define IPATH_CREG_OFFSET(field) (offsetof( \
- struct _infinipath_do_not_use_counters, field) / sizeof(u64))
-
-static const struct ipath_kregs ipath_7220_kregs = {
- .kr_control = IPATH_KREG_OFFSET(Control),
- .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
- .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
- .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
- .kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
- .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
- .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
- .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
- .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
- .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
- .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
- .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
- .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
- .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
- .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
- .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
- .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
- .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
- .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
- .kr_intclear = IPATH_KREG_OFFSET(IntClear),
- .kr_intmask = IPATH_KREG_OFFSET(IntMask),
- .kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
- .kr_mdio = IPATH_KREG_OFFSET(MDIO),
- .kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
- .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
- .kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
- .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
- .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
- .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
- .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
- .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
- .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
- .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
- .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
- .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
- .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
- .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
- .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
- .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
- .kr_revision = IPATH_KREG_OFFSET(Revision),
- .kr_scratch = IPATH_KREG_OFFSET(Scratch),
- .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
- .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
- .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendAvailAddr),
- .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendBufBase),
- .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendBufCnt),
- .kr_sendpiosize = IPATH_KREG_OFFSET(SendBufSize),
- .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
- .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
- .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
- .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
-
- .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
-
- /* send dma related regs */
- .kr_senddmabase = IPATH_KREG_OFFSET(SendDmaBase),
- .kr_senddmalengen = IPATH_KREG_OFFSET(SendDmaLenGen),
- .kr_senddmatail = IPATH_KREG_OFFSET(SendDmaTail),
- .kr_senddmahead = IPATH_KREG_OFFSET(SendDmaHead),
- .kr_senddmaheadaddr = IPATH_KREG_OFFSET(SendDmaHeadAddr),
- .kr_senddmabufmask0 = IPATH_KREG_OFFSET(SendDmaBufMask0),
- .kr_senddmabufmask1 = IPATH_KREG_OFFSET(SendDmaBufMask1),
- .kr_senddmabufmask2 = IPATH_KREG_OFFSET(SendDmaBufMask2),
- .kr_senddmastatus = IPATH_KREG_OFFSET(SendDmaStatus),
-
- /* SerDes related regs */
- .kr_ibserdesctrl = IPATH_KREG_OFFSET(IBSerDesCtrl),
- .kr_ib_epbacc = IPATH_KREG_OFFSET(IbsdEpbAccCtl),
- .kr_ib_epbtrans = IPATH_KREG_OFFSET(IbsdEpbTransReg),
- .kr_pcie_epbacc = IPATH_KREG_OFFSET(PcieEpbAccCtl),
- .kr_pcie_epbtrans = IPATH_KREG_OFFSET(PcieEpbTransCtl),
- .kr_ib_ddsrxeq = IPATH_KREG_OFFSET(SerDesDDSRXEQ),
-
- /*
- * These should not be used directly via ipath_read_kreg64(),
- * use them with ipath_read_kreg64_port()
- */
- .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
- .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0),
-
- /*
- * The rcvpktled register controls one of the debug port signals, so
- * a packet activity LED can be connected to it.
- */
- .kr_rcvpktledcnt = IPATH_KREG_OFFSET(RcvPktLEDCnt),
- .kr_pcierbuftestreg0 = IPATH_KREG_OFFSET(PCIeRBufTestReg0),
- .kr_pcierbuftestreg1 = IPATH_KREG_OFFSET(PCIeRBufTestReg1),
-
- .kr_hrtbt_guid = IPATH_KREG_OFFSET(HRTBT_GUID),
- .kr_ibcddrctrl = IPATH_KREG_OFFSET(IBCDDRCtrl),
- .kr_ibcddrstatus = IPATH_KREG_OFFSET(IBCDDRStatus),
- .kr_jintreload = IPATH_KREG_OFFSET(JIntReload)
-};
-
-static const struct ipath_cregs ipath_7220_cregs = {
- .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
- .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
- .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
- .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
- .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
- .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
- .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
- .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
- .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
- .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
- .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
- .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
- .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
- .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
- .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
- .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
- .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
- .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
- .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
- .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
- .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
- .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
- .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
- .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
- .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
- .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
- .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
- .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
- .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
- .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
- .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
- .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
- .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt),
- .cr_vl15droppedpktcnt = IPATH_CREG_OFFSET(RxVL15DroppedPktCnt),
- .cr_rxotherlocalphyerrcnt =
- IPATH_CREG_OFFSET(RxOtherLocalPhyErrCnt),
- .cr_excessbufferovflcnt = IPATH_CREG_OFFSET(ExcessBufferOvflCnt),
- .cr_locallinkintegrityerrcnt =
- IPATH_CREG_OFFSET(LocalLinkIntegrityErrCnt),
- .cr_rxvlerrcnt = IPATH_CREG_OFFSET(RxVlErrCnt),
- .cr_rxdlidfltrcnt = IPATH_CREG_OFFSET(RxDlidFltrCnt),
- .cr_psstat = IPATH_CREG_OFFSET(PSStat),
- .cr_psstart = IPATH_CREG_OFFSET(PSStart),
- .cr_psinterval = IPATH_CREG_OFFSET(PSInterval),
- .cr_psrcvdatacount = IPATH_CREG_OFFSET(PSRcvDataCount),
- .cr_psrcvpktscount = IPATH_CREG_OFFSET(PSRcvPktsCount),
- .cr_psxmitdatacount = IPATH_CREG_OFFSET(PSXmitDataCount),
- .cr_psxmitpktscount = IPATH_CREG_OFFSET(PSXmitPktsCount),
- .cr_psxmitwaitcount = IPATH_CREG_OFFSET(PSXmitWaitCount),
-};
-
-/* kr_control bits */
-#define INFINIPATH_C_RESET (1U<<7)
-
-/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_RCVURG_MASK ((1ULL<<17)-1)
-#define INFINIPATH_I_RCVURG_SHIFT 32
-#define INFINIPATH_I_RCVAVAIL_MASK ((1ULL<<17)-1)
-#define INFINIPATH_I_RCVAVAIL_SHIFT 0
-#define INFINIPATH_I_SERDESTRIMDONE (1ULL<<27)
-
-/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
-#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK 0x00000000000000ffULL
-#define INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT 0
-#define INFINIPATH_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL
-#define INFINIPATH_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL
-#define INFINIPATH_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL
-#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
-#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
-#define INFINIPATH_HWE_PCIE1PLLFAILED 0x0400000000000000ULL
-#define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL
-#define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL
-/* specific to this chip */
-#define INFINIPATH_HWE_PCIECPLDATAQUEUEERR 0x0000000000000040ULL
-#define INFINIPATH_HWE_PCIECPLHDRQUEUEERR 0x0000000000000080ULL
-#define INFINIPATH_HWE_SDMAMEMREADERR 0x0000000010000000ULL
-#define INFINIPATH_HWE_CLK_UC_PLLNOTLOCKED 0x2000000000000000ULL
-#define INFINIPATH_HWE_PCIESERDESQ0PCLKNOTDETECT 0x0100000000000000ULL
-#define INFINIPATH_HWE_PCIESERDESQ1PCLKNOTDETECT 0x0200000000000000ULL
-#define INFINIPATH_HWE_PCIESERDESQ2PCLKNOTDETECT 0x0400000000000000ULL
-#define INFINIPATH_HWE_PCIESERDESQ3PCLKNOTDETECT 0x0800000000000000ULL
-#define INFINIPATH_HWE_DDSRXEQMEMORYPARITYERR 0x0000008000000000ULL
-#define INFINIPATH_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL
-#define INFINIPATH_HWE_PCIE_UC_OCT0MEMORYPARITYERR 0x0000001000000000ULL
-#define INFINIPATH_HWE_PCIE_UC_OCT1MEMORYPARITYERR 0x0000002000000000ULL
-
-#define IBA7220_IBCS_LINKTRAININGSTATE_MASK 0x1F
-#define IBA7220_IBCS_LINKSTATE_SHIFT 5
-#define IBA7220_IBCS_LINKSPEED_SHIFT 8
-#define IBA7220_IBCS_LINKWIDTH_SHIFT 9
-
-#define IBA7220_IBCC_LINKINITCMD_MASK 0x7ULL
-#define IBA7220_IBCC_LINKCMD_SHIFT 19
-#define IBA7220_IBCC_MAXPKTLEN_SHIFT 21
-
-/* kr_ibcddrctrl bits */
-#define IBA7220_IBC_DLIDLMC_MASK 0xFFFFFFFFUL
-#define IBA7220_IBC_DLIDLMC_SHIFT 32
-#define IBA7220_IBC_HRTBT_MASK 3
-#define IBA7220_IBC_HRTBT_SHIFT 16
-#define IBA7220_IBC_HRTBT_ENB 0x10000UL
-#define IBA7220_IBC_LANE_REV_SUPPORTED (1<<8)
-#define IBA7220_IBC_LREV_MASK 1
-#define IBA7220_IBC_LREV_SHIFT 8
-#define IBA7220_IBC_RXPOL_MASK 1
-#define IBA7220_IBC_RXPOL_SHIFT 7
-#define IBA7220_IBC_WIDTH_SHIFT 5
-#define IBA7220_IBC_WIDTH_MASK 0x3
-#define IBA7220_IBC_WIDTH_1X_ONLY (0<<IBA7220_IBC_WIDTH_SHIFT)
-#define IBA7220_IBC_WIDTH_4X_ONLY (1<<IBA7220_IBC_WIDTH_SHIFT)
-#define IBA7220_IBC_WIDTH_AUTONEG (2<<IBA7220_IBC_WIDTH_SHIFT)
-#define IBA7220_IBC_SPEED_AUTONEG (1<<1)
-#define IBA7220_IBC_SPEED_SDR (1<<2)
-#define IBA7220_IBC_SPEED_DDR (1<<3)
-#define IBA7220_IBC_SPEED_AUTONEG_MASK (0x7<<1)
-#define IBA7220_IBC_IBTA_1_2_MASK (1)
-
-/* kr_ibcddrstatus */
-/* link latency shift is 0, don't bother defining */
-#define IBA7220_DDRSTAT_LINKLAT_MASK 0x3ffffff
-
-/* kr_extstatus bits */
-#define INFINIPATH_EXTS_FREQSEL 0x2
-#define INFINIPATH_EXTS_SERDESSEL 0x4
-#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
-#define INFINIPATH_EXTS_MEMBIST_DISABLED 0x0000000000008000
-
-/* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET 0x5ULL
-#define INFINIPATH_XGXS_FC_SAFE (1ULL<<63)
-
-/* kr_rcvpktledcnt */
-#define IBA7220_LEDBLINK_ON_SHIFT 32 /* 4ns period on after packet */
-#define IBA7220_LEDBLINK_OFF_SHIFT 0 /* 4ns period off before next on */
-
-#define _IPATH_GPIO_SDA_NUM 1
-#define _IPATH_GPIO_SCL_NUM 0
-
-#define IPATH_GPIO_SDA (1ULL << \
- (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-#define IPATH_GPIO_SCL (1ULL << \
- (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-
-#define IBA7220_R_INTRAVAIL_SHIFT 17
-#define IBA7220_R_TAILUPD_SHIFT 35
-#define IBA7220_R_PORTCFG_SHIFT 36
-
-#define INFINIPATH_JINT_PACKETSHIFT 16
-#define INFINIPATH_JINT_DEFAULT_IDLE_TICKS 0
-#define INFINIPATH_JINT_DEFAULT_MAX_PACKETS 0
-
-#define IBA7220_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */
-
-/*
- * the size bits give us 2^N, in KB units. 0 marks as invalid,
- * and 7 is reserved. We currently use only 2KB and 4KB
- */
-#define IBA7220_TID_SZ_SHIFT 37 /* shift to 3bit size selector */
-#define IBA7220_TID_SZ_2K (1UL<<IBA7220_TID_SZ_SHIFT) /* 2KB */
-#define IBA7220_TID_SZ_4K (2UL<<IBA7220_TID_SZ_SHIFT) /* 4KB */
-#define IBA7220_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */
-
-#define IPATH_AUTONEG_TRIES 5 /* sequential retries to negotiate DDR */
-
-static char int_type[16] = "auto";
-module_param_string(interrupt_type, int_type, sizeof(int_type), 0444);
-MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx");
-
-/* packet rate matching delay; chip has support */
-static u8 rate_to_delay[2][2] = {
- /* 1x, 4x */
- { 8, 2 }, /* SDR */
- { 4, 1 } /* DDR */
-};
-
-/* 7220 specific hardware errors... */
-static const struct ipath_hwerror_msgs ipath_7220_hwerror_msgs[] = {
- INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"),
- INFINIPATH_HWE_MSG(PCIECPLTIMEOUT, "PCIe completion timeout"),
- /*
- * In practice, it's unlikely wthat we'll see PCIe PLL, or bus
- * parity or memory parity error failures, because most likely we
- * won't be able to talk to the core of the chip. Nonetheless, we
- * might see them, if they are in parts of the PCIe core that aren't
- * essential.
- */
- INFINIPATH_HWE_MSG(PCIE1PLLFAILED, "PCIePLL1"),
- INFINIPATH_HWE_MSG(PCIE0PLLFAILED, "PCIePLL0"),
- INFINIPATH_HWE_MSG(PCIEBUSPARITYXTLH, "PCIe XTLH core parity"),
- INFINIPATH_HWE_MSG(PCIEBUSPARITYXADM, "PCIe ADM TX core parity"),
- INFINIPATH_HWE_MSG(PCIEBUSPARITYRADM, "PCIe ADM RX core parity"),
- INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"),
- INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
- INFINIPATH_HWE_MSG(PCIECPLDATAQUEUEERR, "PCIe cpl header queue"),
- INFINIPATH_HWE_MSG(PCIECPLHDRQUEUEERR, "PCIe cpl data queue"),
- INFINIPATH_HWE_MSG(SDMAMEMREADERR, "Send DMA memory read"),
- INFINIPATH_HWE_MSG(CLK_UC_PLLNOTLOCKED, "uC PLL clock not locked"),
- INFINIPATH_HWE_MSG(PCIESERDESQ0PCLKNOTDETECT,
- "PCIe serdes Q0 no clock"),
- INFINIPATH_HWE_MSG(PCIESERDESQ1PCLKNOTDETECT,
- "PCIe serdes Q1 no clock"),
- INFINIPATH_HWE_MSG(PCIESERDESQ2PCLKNOTDETECT,
- "PCIe serdes Q2 no clock"),
- INFINIPATH_HWE_MSG(PCIESERDESQ3PCLKNOTDETECT,
- "PCIe serdes Q3 no clock"),
- INFINIPATH_HWE_MSG(DDSRXEQMEMORYPARITYERR,
- "DDS RXEQ memory parity"),
- INFINIPATH_HWE_MSG(IB_UC_MEMORYPARITYERR, "IB uC memory parity"),
- INFINIPATH_HWE_MSG(PCIE_UC_OCT0MEMORYPARITYERR,
- "PCIe uC oct0 memory parity"),
- INFINIPATH_HWE_MSG(PCIE_UC_OCT1MEMORYPARITYERR,
- "PCIe uC oct1 memory parity"),
-};
-
-static void autoneg_work(struct work_struct *);
-
-/*
- * the offset is different for different configured port numbers, since
- * port0 is fixed in size, but others can vary. Make it a function to
- * make the issue more obvious.
-*/
-static inline u32 port_egrtid_idx(struct ipath_devdata *dd, unsigned port)
-{
- return port ? dd->ipath_p0_rcvegrcnt +
- (port-1) * dd->ipath_rcvegrcnt : 0;
-}
-
-static void ipath_7220_txe_recover(struct ipath_devdata *dd)
-{
- ++ipath_stats.sps_txeparity;
-
- dev_info(&dd->pcidev->dev,
- "Recovering from TXE PIO parity error\n");
- ipath_disarm_senderrbufs(dd);
-}
-
-
-/**
- * ipath_7220_handle_hwerrors - display hardware errors.
- * @dd: the infinipath device
- * @msg: the output buffer
- * @msgl: the size of the output buffer
- *
- * Use same msg buffer as regular errors to avoid excessive stack
- * use. Most hardware errors are catastrophic, but for right now,
- * we'll print them and continue. We reuse the same message buffer as
- * ipath_handle_errors() to avoid excessive stack usage.
- */
-static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg,
- size_t msgl)
-{
- ipath_err_t hwerrs;
- u32 bits, ctrl;
- int isfatal = 0;
- char bitsmsg[64];
- int log_idx;
-
- hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
- if (!hwerrs) {
- /*
- * better than printing cofusing messages
- * This seems to be related to clearing the crc error, or
- * the pll error during init.
- */
- ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
- goto bail;
- } else if (hwerrs == ~0ULL) {
- ipath_dev_err(dd, "Read of hardware error status failed "
- "(all bits set); ignoring\n");
- goto bail;
- }
- ipath_stats.sps_hwerrs++;
-
- /*
- * Always clear the error status register, except MEMBISTFAIL,
- * regardless of whether we continue or stop using the chip.
- * We want that set so we know it failed, even across driver reload.
- * We'll still ignore it in the hwerrmask. We do this partly for
- * diagnostics, but also for support.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
-
- hwerrs &= dd->ipath_hwerrmask;
-
- /* We log some errors to EEPROM, check if we have any of those. */
- for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx)
- if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log)
- ipath_inc_eeprom_err(dd, log_idx, 1);
- /*
- * Make sure we get this much out, unless told to be quiet,
- * or it's occurred within the last 5 seconds.
- */
- if ((hwerrs & ~(dd->ipath_lasthwerror |
- ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
- (ipath_debug & __IPATH_VERBDBG))
- dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
- "(cleared)\n", (unsigned long long) hwerrs);
- dd->ipath_lasthwerror |= hwerrs;
-
- if (hwerrs & ~dd->ipath_hwe_bitsextant)
- ipath_dev_err(dd, "hwerror interrupt with unknown errors "
- "%llx set\n", (unsigned long long)
- (hwerrs & ~dd->ipath_hwe_bitsextant));
-
- if (hwerrs & INFINIPATH_HWE_IB_UC_MEMORYPARITYERR)
- ipath_sd7220_clr_ibpar(dd);
-
- ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
- if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
- /*
- * Parity errors in send memory are recoverable by h/w
- * just do housekeeping, exit freeze mode and continue.
- */
- if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
- ipath_7220_txe_recover(dd);
- hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
- }
- if (hwerrs) {
- /*
- * If any set that we aren't ignoring only make the
- * complaint once, in case it's stuck or recurring,
- * and we get here multiple times
- * Force link down, so switch knows, and
- * LEDs are turned off.
- */
- if (dd->ipath_flags & IPATH_INITTED) {
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
- ipath_setup_7220_setextled(dd,
- INFINIPATH_IBCS_L_STATE_DOWN,
- INFINIPATH_IBCS_LT_STATE_DISABLED);
- ipath_dev_err(dd, "Fatal Hardware Error "
- "(freeze mode), no longer"
- " usable, SN %.16s\n",
- dd->ipath_serial);
- isfatal = 1;
- }
- /*
- * Mark as having had an error for driver, and also
- * for /sys and status word mapped to user programs.
- * This marks unit as not usable, until reset.
- */
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- dd->ipath_flags &= ~IPATH_INITTED;
- } else {
- ipath_dbg("Clearing freezemode on ignored or "
- "recovered hardware error\n");
- ipath_clear_freeze(dd);
- }
- }
-
- *msg = '\0';
-
- if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
- strlcat(msg, "[Memory BIST test failed, "
- "InfiniPath hardware unusable]", msgl);
- /* ignore from now on, so disable until driver reloaded */
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- ipath_format_hwerrors(hwerrs,
- ipath_7220_hwerror_msgs,
- ARRAY_SIZE(ipath_7220_hwerror_msgs),
- msg, msgl);
-
- if (hwerrs & (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK
- << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT)) {
- bits = (u32) ((hwerrs >>
- INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) &
- INFINIPATH_HWE_PCIEMEMPARITYERR_MASK);
- snprintf(bitsmsg, sizeof bitsmsg,
- "[PCIe Mem Parity Errs %x] ", bits);
- strlcat(msg, bitsmsg, msgl);
- }
-
-#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
- INFINIPATH_HWE_COREPLL_RFSLIP)
-
- if (hwerrs & _IPATH_PLL_FAIL) {
- snprintf(bitsmsg, sizeof bitsmsg,
- "[PLL failed (%llx), InfiniPath hardware unusable]",
- (unsigned long long) hwerrs & _IPATH_PLL_FAIL);
- strlcat(msg, bitsmsg, msgl);
- /* ignore from now on, so disable until driver reloaded */
- dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
- /*
- * If it occurs, it is left masked since the eternal
- * interface is unused.
- */
- dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
- ipath_dev_err(dd, "%s hardware error\n", msg);
- /*
- * For /sys status file. if no trailing } is copied, we'll
- * know it was truncated.
- */
- if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
- snprintf(dd->ipath_freezemsg, dd->ipath_freezelen,
- "{%s}", msg);
-bail:;
-}
-
-/**
- * ipath_7220_boardname - fill in the board name
- * @dd: the infinipath device
- * @name: the output buffer
- * @namelen: the size of the output buffer
- *
- * info is based on the board revision register
- */
-static int ipath_7220_boardname(struct ipath_devdata *dd, char *name,
- size_t namelen)
-{
- char *n = NULL;
- u8 boardrev = dd->ipath_boardrev;
- int ret;
-
- if (boardrev == 15) {
- /*
- * Emulator sometimes comes up all-ones, rather than zero.
- */
- boardrev = 0;
- dd->ipath_boardrev = boardrev;
- }
- switch (boardrev) {
- case 0:
- n = "InfiniPath_7220_Emulation";
- break;
- case 1:
- n = "InfiniPath_QLE7240";
- break;
- case 2:
- n = "InfiniPath_QLE7280";
- break;
- case 3:
- n = "InfiniPath_QLE7242";
- break;
- case 4:
- n = "InfiniPath_QEM7240";
- break;
- case 5:
- n = "InfiniPath_QMI7240";
- break;
- case 6:
- n = "InfiniPath_QMI7264";
- break;
- case 7:
- n = "InfiniPath_QMH7240";
- break;
- case 8:
- n = "InfiniPath_QME7240";
- break;
- case 9:
- n = "InfiniPath_QLE7250";
- break;
- case 10:
- n = "InfiniPath_QLE7290";
- break;
- case 11:
- n = "InfiniPath_QEM7250";
- break;
- case 12:
- n = "InfiniPath_QLE-Bringup";
- break;
- default:
- ipath_dev_err(dd,
- "Don't yet know about board with ID %u\n",
- boardrev);
- snprintf(name, namelen, "Unknown_InfiniPath_PCIe_%u",
- boardrev);
- break;
- }
- if (n)
- snprintf(name, namelen, "%s", n);
-
- if (dd->ipath_majrev != 5 || !dd->ipath_minrev ||
- dd->ipath_minrev > 2) {
- ipath_dev_err(dd, "Unsupported InfiniPath hardware "
- "revision %u.%u!\n",
- dd->ipath_majrev, dd->ipath_minrev);
- ret = 1;
- } else if (dd->ipath_minrev == 1 &&
- !(dd->ipath_flags & IPATH_INITTED)) {
- /* Rev1 chips are prototype. Complain at init, but allow use */
- ipath_dev_err(dd, "Unsupported hardware "
- "revision %u.%u, Contact support@qlogic.com\n",
- dd->ipath_majrev, dd->ipath_minrev);
- ret = 0;
- } else
- ret = 0;
-
- /*
- * Set here not in ipath_init_*_funcs because we have to do
- * it after we can read chip registers.
- */
- dd->ipath_ureg_align = 0x10000; /* 64KB alignment */
-
- return ret;
-}
-
-/**
- * ipath_7220_init_hwerrors - enable hardware errors
- * @dd: the infinipath device
- *
- * now that we have finished initializing everything that might reasonably
- * cause a hardware error, and cleared those errors bits as they occur,
- * we can enable hardware errors in the mask (potentially enabling
- * freeze mode), and enable hardware errors as errors (along with
- * everything else) in errormask
- */
-static void ipath_7220_init_hwerrors(struct ipath_devdata *dd)
-{
- ipath_err_t val;
- u64 extsval;
-
- extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
-
- if (!(extsval & (INFINIPATH_EXTS_MEMBIST_ENDTEST |
- INFINIPATH_EXTS_MEMBIST_DISABLED)))
- ipath_dev_err(dd, "MemBIST did not complete!\n");
- if (extsval & INFINIPATH_EXTS_MEMBIST_DISABLED)
- dev_info(&dd->pcidev->dev, "MemBIST is disabled.\n");
-
- val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */
-
- if (!dd->ipath_boardrev) /* no PLL for Emulator */
- val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
-
- if (dd->ipath_minrev == 1)
- val &= ~(1ULL << 42); /* TXE LaunchFIFO Parity rev1 issue */
-
- val &= ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR;
- dd->ipath_hwerrmask = val;
-
- /*
- * special trigger "error" is for debugging purposes. It
- * works around a processor/chipset problem. The error
- * interrupt allows us to count occurrences, but we don't
- * want to pay the overhead for normal use. Emulation only
- */
- if (!dd->ipath_boardrev)
- dd->ipath_maskederrs = INFINIPATH_E_SENDSPECIALTRIGGER;
-}
-
-/*
- * All detailed interaction with the SerDes has been moved to ipath_sd7220.c
- *
- * The portion of IBA7220-specific bringup_serdes() that actually deals with
- * registers and memory within the SerDes itself is ipath_sd7220_init().
- */
-
-/**
- * ipath_7220_bringup_serdes - bring up the serdes
- * @dd: the infinipath device
- */
-static int ipath_7220_bringup_serdes(struct ipath_devdata *dd)
-{
- int ret = 0;
- u64 val, prev_val, guid;
- int was_reset; /* Note whether uC was reset */
-
- ipath_dbg("Trying to bringup serdes\n");
-
- if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
- INFINIPATH_HWE_SERDESPLLFAILED) {
- ipath_dbg("At start, serdes PLL failed bit set "
- "in hwerrstatus, clearing and continuing\n");
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- INFINIPATH_HWE_SERDESPLLFAILED);
- }
-
- dd->ibdeltainprog = 1;
- dd->ibsymsnap =
- ipath_read_creg32(dd, dd->ipath_cregs->cr_ibsymbolerrcnt);
- dd->iblnkerrsnap =
- ipath_read_creg32(dd, dd->ipath_cregs->cr_iblinkerrrecovcnt);
-
- if (!dd->ipath_ibcddrctrl) {
- /* not on re-init after reset */
- dd->ipath_ibcddrctrl =
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcddrctrl);
-
- if (dd->ipath_link_speed_enabled ==
- (IPATH_IB_SDR | IPATH_IB_DDR))
- dd->ipath_ibcddrctrl |=
- IBA7220_IBC_SPEED_AUTONEG_MASK |
- IBA7220_IBC_IBTA_1_2_MASK;
- else
- dd->ipath_ibcddrctrl |=
- dd->ipath_link_speed_enabled == IPATH_IB_DDR
- ? IBA7220_IBC_SPEED_DDR :
- IBA7220_IBC_SPEED_SDR;
- if ((dd->ipath_link_width_enabled & (IB_WIDTH_1X |
- IB_WIDTH_4X)) == (IB_WIDTH_1X | IB_WIDTH_4X))
- dd->ipath_ibcddrctrl |= IBA7220_IBC_WIDTH_AUTONEG;
- else
- dd->ipath_ibcddrctrl |=
- dd->ipath_link_width_enabled == IB_WIDTH_4X
- ? IBA7220_IBC_WIDTH_4X_ONLY :
- IBA7220_IBC_WIDTH_1X_ONLY;
-
- /* always enable these on driver reload, not sticky */
- dd->ipath_ibcddrctrl |=
- IBA7220_IBC_RXPOL_MASK << IBA7220_IBC_RXPOL_SHIFT;
- dd->ipath_ibcddrctrl |=
- IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
- /*
- * automatic lane reversal detection for receive
- * doesn't work correctly in rev 1, so disable it
- * on that rev, otherwise enable (disabling not
- * sticky across reload for >rev1)
- */
- if (dd->ipath_minrev == 1)
- dd->ipath_ibcddrctrl &=
- ~IBA7220_IBC_LANE_REV_SUPPORTED;
- else
- dd->ipath_ibcddrctrl |=
- IBA7220_IBC_LANE_REV_SUPPORTED;
- }
-
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl,
- dd->ipath_ibcddrctrl);
-
- ipath_write_kreg(dd, IPATH_KREG_OFFSET(IBNCModeCtrl), 0Ull);
-
- /* IBA7220 has SERDES MPU reset in D0 of what _was_ IBPLLCfg */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl);
- /* remember if uC was in Reset or not, for dactrim */
- was_reset = (val & 1);
- ipath_cdbg(VERBOSE, "IBReset %s xgxsconfig %llx\n",
- was_reset ? "Asserted" : "Negated", (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
-
- if (dd->ipath_boardrev) {
- /*
- * Hardware is not emulator, and may have been reset. Init it.
- * Below will release reset, but needs to know if chip was
- * originally in reset, to only trim DACs on first time
- * after chip reset or powercycle (not driver reload)
- */
- ret = ipath_sd7220_init(dd, was_reset);
- }
-
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- prev_val = val;
- val |= INFINIPATH_XGXS_FC_SAFE;
- if (val != prev_val) {
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- }
- if (val & INFINIPATH_XGXS_RESET)
- val &= ~INFINIPATH_XGXS_RESET;
- if (val != prev_val)
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
-
- ipath_cdbg(VERBOSE, "done: xgxs=%llx from %llx\n",
- (unsigned long long)
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig),
- (unsigned long long) prev_val);
-
- guid = be64_to_cpu(dd->ipath_guid);
-
- if (!guid) {
- /* have to have something, so use likely unique tsc */
- guid = get_cycles();
- ipath_dbg("No GUID for heartbeat, faking %llx\n",
- (unsigned long long)guid);
- } else
- ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n",
- (unsigned long long) guid);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hrtbt_guid, guid);
- return ret;
-}
-
-static void ipath_7220_config_jint(struct ipath_devdata *dd,
- u16 idle_ticks, u16 max_packets)
-{
-
- /*
- * We can request a receive interrupt for 1 or more packets
- * from current offset.
- */
- if (idle_ticks == 0 || max_packets == 0)
- /* interrupt after one packet if no mitigation */
- dd->ipath_rhdrhead_intr_off =
- 1ULL << IBA7220_HDRHEAD_PKTINT_SHIFT;
- else
- /* Turn off RcvHdrHead interrupts if using mitigation */
- dd->ipath_rhdrhead_intr_off = 0ULL;
-
- /* refresh kernel RcvHdrHead registers... */
- ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off |
- dd->ipath_pd[0]->port_head, 0);
-
- dd->ipath_jint_max_packets = max_packets;
- dd->ipath_jint_idle_ticks = idle_ticks;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_jintreload,
- ((u64) max_packets << INFINIPATH_JINT_PACKETSHIFT) |
- idle_ticks);
-}
-
-/**
- * ipath_7220_quiet_serdes - set serdes to txidle
- * @dd: the infinipath device
- * Called when driver is being unloaded
- */
-static void ipath_7220_quiet_serdes(struct ipath_devdata *dd)
-{
- u64 val;
- if (dd->ibsymdelta || dd->iblnkerrdelta ||
- dd->ibdeltainprog) {
- u64 diagc;
- /* enable counter writes */
- diagc = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwdiagctrl);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl,
- diagc | INFINIPATH_DC_COUNTERWREN);
-
- if (dd->ibsymdelta || dd->ibdeltainprog) {
- val = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt);
- if (dd->ibdeltainprog)
- val -= val - dd->ibsymsnap;
- val -= dd->ibsymdelta;
- ipath_write_creg(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt, val);
- }
- if (dd->iblnkerrdelta || dd->ibdeltainprog) {
- val = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- if (dd->ibdeltainprog)
- val -= val - dd->iblnkerrsnap;
- val -= dd->iblnkerrdelta;
- ipath_write_creg(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt, val);
- }
-
- /* and disable counter writes */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwdiagctrl, diagc);
- }
-
- dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG;
- wake_up(&dd->ipath_autoneg_wait);
- cancel_delayed_work(&dd->ipath_autoneg_work);
- flush_scheduled_work();
- ipath_shutdown_relock_poll(dd);
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- val |= INFINIPATH_XGXS_RESET;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
-}
-
-static int ipath_7220_intconfig(struct ipath_devdata *dd)
-{
- ipath_7220_config_jint(dd, dd->ipath_jint_idle_ticks,
- dd->ipath_jint_max_packets);
- return 0;
-}
-
-/**
- * ipath_setup_7220_setextled - set the state of the two external LEDs
- * @dd: the infinipath device
- * @lst: the L state
- * @ltst: the LT state
- *
- * These LEDs indicate the physical and logical state of IB link.
- * For this chip (at least with recommended board pinouts), LED1
- * is Yellow (logical state) and LED2 is Green (physical state),
- *
- * Note: We try to match the Mellanox HCA LED behavior as best
- * we can. Green indicates physical link state is OK (something is
- * plugged in, and we can train).
- * Amber indicates the link is logically up (ACTIVE).
- * Mellanox further blinks the amber LED to indicate data packet
- * activity, but we have no hardware support for that, so it would
- * require waking up every 10-20 msecs and checking the counters
- * on the chip, and then turning the LED off if appropriate. That's
- * visible overhead, so not something we will do.
- *
- */
-static void ipath_setup_7220_setextled(struct ipath_devdata *dd, u64 lst,
- u64 ltst)
-{
- u64 extctl, ledblink = 0;
- unsigned long flags = 0;
-
- /* the diags use the LED to indicate diag info, so we leave
- * the external LED alone when the diags are running */
- if (ipath_diag_inuse)
- return;
-
- /* Allow override of LED display for, e.g. Locating system in rack */
- if (dd->ipath_led_override) {
- ltst = (dd->ipath_led_override & IPATH_LED_PHYS)
- ? INFINIPATH_IBCS_LT_STATE_LINKUP
- : INFINIPATH_IBCS_LT_STATE_DISABLED;
- lst = (dd->ipath_led_override & IPATH_LED_LOG)
- ? INFINIPATH_IBCS_L_STATE_ACTIVE
- : INFINIPATH_IBCS_L_STATE_DOWN;
- }
-
- spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
- extctl = dd->ipath_extctrl & ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
- INFINIPATH_EXTC_LED2PRIPORT_ON);
- if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP) {
- extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
- /*
- * counts are in chip clock (4ns) periods.
- * This is 1/16 sec (66.6ms) on,
- * 3/16 sec (187.5 ms) off, with packets rcvd
- */
- ledblink = ((66600*1000UL/4) << IBA7220_LEDBLINK_ON_SHIFT)
- | ((187500*1000UL/4) << IBA7220_LEDBLINK_OFF_SHIFT);
- }
- if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
- extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
- dd->ipath_extctrl = extctl;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
- spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
-
- if (ledblink) /* blink the LED on packet receive */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvpktledcnt,
- ledblink);
-}
-
-/*
- * Similar to pci_intx(pdev, 1), except that we make sure
- * msi is off...
- */
-static void ipath_enable_intx(struct pci_dev *pdev)
-{
- u16 cw, new;
- int pos;
-
- /* first, turn on INTx */
- pci_read_config_word(pdev, PCI_COMMAND, &cw);
- new = cw & ~PCI_COMMAND_INTX_DISABLE;
- if (new != cw)
- pci_write_config_word(pdev, PCI_COMMAND, new);
-
- /* then turn off MSI */
- pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
- if (pos) {
- pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &cw);
- new = cw & ~PCI_MSI_FLAGS_ENABLE;
- if (new != cw)
- pci_write_config_word(pdev, pos + PCI_MSI_FLAGS, new);
- }
-}
-
-static int ipath_msi_enabled(struct pci_dev *pdev)
-{
- int pos, ret = 0;
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
- if (pos) {
- u16 cw;
-
- pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &cw);
- ret = !!(cw & PCI_MSI_FLAGS_ENABLE);
- }
- return ret;
-}
-
-/*
- * disable msi interrupt if enabled, and clear the flag.
- * flag is used primarily for the fallback to INTx, but
- * is also used in reinit after reset as a flag.
- */
-static void ipath_7220_nomsi(struct ipath_devdata *dd)
-{
- dd->ipath_msi_lo = 0;
-
- if (ipath_msi_enabled(dd->pcidev)) {
- /*
- * free, but don't zero; later kernels require
- * it be freed before disable_msi, so the intx
- * setup has to request it again.
- */
- if (dd->ipath_irq)
- free_irq(dd->ipath_irq, dd);
- pci_disable_msi(dd->pcidev);
- }
-}
-
-/*
- * ipath_setup_7220_cleanup - clean up any per-chip chip-specific stuff
- * @dd: the infinipath device
- *
- * Nothing but msi interrupt cleanup for now.
- *
- * This is called during driver unload.
- */
-static void ipath_setup_7220_cleanup(struct ipath_devdata *dd)
-{
- ipath_7220_nomsi(dd);
-}
-
-
-static void ipath_7220_pcie_params(struct ipath_devdata *dd, u32 boardrev)
-{
- u16 linkstat, minwidth, speed;
- int pos;
-
- pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP);
- if (!pos) {
- ipath_dev_err(dd, "Can't find PCI Express capability!\n");
- goto bail;
- }
-
- pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA,
- &linkstat);
- /*
- * speed is bits 0-4, linkwidth is bits 4-8
- * no defines for them in headers
- */
- speed = linkstat & 0xf;
- linkstat >>= 4;
- linkstat &= 0x1f;
- dd->ipath_lbus_width = linkstat;
- switch (boardrev) {
- case 0:
- case 2:
- case 10:
- case 12:
- minwidth = 16; /* x16 capable boards */
- break;
- default:
- minwidth = 8; /* x8 capable boards */
- break;
- }
-
- switch (speed) {
- case 1:
- dd->ipath_lbus_speed = 2500; /* Gen1, 2.5GHz */
- break;
- case 2:
- dd->ipath_lbus_speed = 5000; /* Gen1, 5GHz */
- break;
- default: /* not defined, assume gen1 */
- dd->ipath_lbus_speed = 2500;
- break;
- }
-
- if (linkstat < minwidth)
- ipath_dev_err(dd,
- "PCIe width %u (x%u HCA), performance "
- "reduced\n", linkstat, minwidth);
- else
- ipath_cdbg(VERBOSE, "PCIe speed %u width %u (x%u HCA)\n",
- dd->ipath_lbus_speed, linkstat, minwidth);
-
- if (speed != 1)
- ipath_dev_err(dd,
- "PCIe linkspeed %u is incorrect; "
- "should be 1 (2500)!\n", speed);
-
-bail:
- /* fill in string, even on errors */
- snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
- "PCIe,%uMHz,x%u\n",
- dd->ipath_lbus_speed,
- dd->ipath_lbus_width);
- return;
-}
-
-
-/**
- * ipath_setup_7220_config - setup PCIe config related stuff
- * @dd: the infinipath device
- * @pdev: the PCI device
- *
- * The pci_enable_msi() call will fail on systems with MSI quirks
- * such as those with AMD8131, even if the device of interest is not
- * attached to that device, (in the 2.6.13 - 2.6.15 kernels, at least, fixed
- * late in 2.6.16).
- * All that can be done is to edit the kernel source to remove the quirk
- * check until that is fixed.
- * We do not need to call enable_msi() for our HyperTransport chip,
- * even though it uses MSI, and we want to avoid the quirk warning, so
- * So we call enable_msi only for PCIe. If we do end up needing
- * pci_enable_msi at some point in the future for HT, we'll move the
- * call back into the main init_one code.
- * We save the msi lo and hi values, so we can restore them after
- * chip reset (the kernel PCI infrastructure doesn't yet handle that
- * correctly).
- */
-static int ipath_setup_7220_config(struct ipath_devdata *dd,
- struct pci_dev *pdev)
-{
- int pos, ret = -1;
- u32 boardrev;
-
- dd->ipath_msi_lo = 0; /* used as a flag during reset processing */
-
- pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
- if (!strcmp(int_type, "force_msi") || !strcmp(int_type, "auto"))
- ret = pci_enable_msi(pdev);
- if (ret) {
- if (!strcmp(int_type, "force_msi")) {
- ipath_dev_err(dd, "pci_enable_msi failed: %d, "
- "force_msi is on, so not continuing.\n",
- ret);
- return ret;
- }
-
- ipath_enable_intx(pdev);
- if (!strcmp(int_type, "auto"))
- ipath_dev_err(dd, "pci_enable_msi failed: %d, "
- "falling back to INTx\n", ret);
- } else if (pos) {
- u16 control;
- pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO,
- &dd->ipath_msi_lo);
- pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI,
- &dd->ipath_msi_hi);
- pci_read_config_word(pdev, pos + PCI_MSI_FLAGS,
- &control);
- /* now save the data (vector) info */
- pci_read_config_word(pdev,
- pos + ((control & PCI_MSI_FLAGS_64BIT)
- ? PCI_MSI_DATA_64 :
- PCI_MSI_DATA_32),
- &dd->ipath_msi_data);
- } else
- ipath_dev_err(dd, "Can't find MSI capability, "
- "can't save MSI settings for reset\n");
-
- dd->ipath_irq = pdev->irq;
-
- /*
- * We save the cachelinesize also, although it doesn't
- * really matter.
- */
- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE,
- &dd->ipath_pci_cacheline);
-
- /*
- * this function called early, ipath_boardrev not set yet. Can't
- * use ipath_read_kreg64() yet, too early in init, so use readq()
- */
- boardrev = (readq(&dd->ipath_kregbase[dd->ipath_kregs->kr_revision])
- >> INFINIPATH_R_BOARDID_SHIFT) & INFINIPATH_R_BOARDID_MASK;
-
- ipath_7220_pcie_params(dd, boardrev);
-
- dd->ipath_flags |= IPATH_NODMA_RTAIL | IPATH_HAS_SEND_DMA |
- IPATH_HAS_PBC_CNT | IPATH_HAS_THRESH_UPDATE;
- dd->ipath_pioupd_thresh = 4U; /* set default update threshold */
- return 0;
-}
-
-static void ipath_init_7220_variables(struct ipath_devdata *dd)
-{
- /*
- * setup the register offsets, since they are different for each
- * chip
- */
- dd->ipath_kregs = &ipath_7220_kregs;
- dd->ipath_cregs = &ipath_7220_cregs;
-
- /*
- * bits for selecting i2c direction and values,
- * used for I2C serial flash
- */
- dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
- dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
- dd->ipath_gpio_sda = IPATH_GPIO_SDA;
- dd->ipath_gpio_scl = IPATH_GPIO_SCL;
-
- /*
- * Fill in data for field-values that change in IBA7220.
- * We dynamically specify only the mask for LINKTRAININGSTATE
- * and only the shift for LINKSTATE, as they are the only ones
- * that change. Also precalculate the 3 link states of interest
- * and the combined mask.
- */
- dd->ibcs_ls_shift = IBA7220_IBCS_LINKSTATE_SHIFT;
- dd->ibcs_lts_mask = IBA7220_IBCS_LINKTRAININGSTATE_MASK;
- dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
- dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
- dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
- dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
- dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
- (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
-
- /*
- * Fill in data for ibcc field-values that change in IBA7220.
- * We dynamically specify only the mask for LINKINITCMD
- * and only the shift for LINKCMD and MAXPKTLEN, as they are
- * the only ones that change.
- */
- dd->ibcc_lic_mask = IBA7220_IBCC_LINKINITCMD_MASK;
- dd->ibcc_lc_shift = IBA7220_IBCC_LINKCMD_SHIFT;
- dd->ibcc_mpl_shift = IBA7220_IBCC_MAXPKTLEN_SHIFT;
-
- /* Fill in shifts for RcvCtrl. */
- dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
- dd->ipath_r_intravail_shift = IBA7220_R_INTRAVAIL_SHIFT;
- dd->ipath_r_tailupd_shift = IBA7220_R_TAILUPD_SHIFT;
- dd->ipath_r_portcfg_shift = IBA7220_R_PORTCFG_SHIFT;
-
- /* variables for sanity checking interrupt and errors */
- dd->ipath_hwe_bitsextant =
- (INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
- (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) |
- INFINIPATH_HWE_PCIE1PLLFAILED |
- INFINIPATH_HWE_PCIE0PLLFAILED |
- INFINIPATH_HWE_PCIEPOISONEDTLP |
- INFINIPATH_HWE_PCIECPLTIMEOUT |
- INFINIPATH_HWE_PCIEBUSPARITYXTLH |
- INFINIPATH_HWE_PCIEBUSPARITYXADM |
- INFINIPATH_HWE_PCIEBUSPARITYRADM |
- INFINIPATH_HWE_MEMBISTFAILED |
- INFINIPATH_HWE_COREPLL_FBSLIP |
- INFINIPATH_HWE_COREPLL_RFSLIP |
- INFINIPATH_HWE_SERDESPLLFAILED |
- INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
- INFINIPATH_HWE_IBCBUSFRSPCPARITYERR |
- INFINIPATH_HWE_PCIECPLDATAQUEUEERR |
- INFINIPATH_HWE_PCIECPLHDRQUEUEERR |
- INFINIPATH_HWE_SDMAMEMREADERR |
- INFINIPATH_HWE_CLK_UC_PLLNOTLOCKED |
- INFINIPATH_HWE_PCIESERDESQ0PCLKNOTDETECT |
- INFINIPATH_HWE_PCIESERDESQ1PCLKNOTDETECT |
- INFINIPATH_HWE_PCIESERDESQ2PCLKNOTDETECT |
- INFINIPATH_HWE_PCIESERDESQ3PCLKNOTDETECT |
- INFINIPATH_HWE_DDSRXEQMEMORYPARITYERR |
- INFINIPATH_HWE_IB_UC_MEMORYPARITYERR |
- INFINIPATH_HWE_PCIE_UC_OCT0MEMORYPARITYERR |
- INFINIPATH_HWE_PCIE_UC_OCT1MEMORYPARITYERR;
- dd->ipath_i_bitsextant =
- INFINIPATH_I_SDMAINT | INFINIPATH_I_SDMADISABLED |
- (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
- (INFINIPATH_I_RCVAVAIL_MASK <<
- INFINIPATH_I_RCVAVAIL_SHIFT) |
- INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
- INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO |
- INFINIPATH_I_JINT | INFINIPATH_I_SERDESTRIMDONE;
- dd->ipath_e_bitsextant =
- INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
- INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
- INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
- INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
- INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
- INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
- INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
- INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
- INFINIPATH_E_SENDSPECIALTRIGGER |
- INFINIPATH_E_SDMADISABLED | INFINIPATH_E_SMINPKTLEN |
- INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNDERRUN |
- INFINIPATH_E_SPKTLEN | INFINIPATH_E_SDROPPEDSMPPKT |
- INFINIPATH_E_SDROPPEDDATAPKT |
- INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
- INFINIPATH_E_SUNSUPVL | INFINIPATH_E_SENDBUFMISUSE |
- INFINIPATH_E_SDMAGENMISMATCH | INFINIPATH_E_SDMAOUTOFBOUND |
- INFINIPATH_E_SDMATAILOUTOFBOUND | INFINIPATH_E_SDMABASE |
- INFINIPATH_E_SDMA1STDESC | INFINIPATH_E_SDMARPYTAG |
- INFINIPATH_E_SDMADWEN | INFINIPATH_E_SDMAMISSINGDW |
- INFINIPATH_E_SDMAUNEXPDATA |
- INFINIPATH_E_IBSTATUSCHANGED | INFINIPATH_E_INVALIDADDR |
- INFINIPATH_E_RESET | INFINIPATH_E_HARDWARE |
- INFINIPATH_E_SDMADESCADDRMISALIGN |
- INFINIPATH_E_INVALIDEEPCMD;
-
- dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
- dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
- dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
- dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
- dd->ipath_flags |= IPATH_INTREG_64 | IPATH_HAS_MULT_IB_SPEED
- | IPATH_HAS_LINK_LATENCY;
-
- /*
- * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
- * 2 is Some Misc, 3 is reserved for future.
- */
- dd->ipath_eep_st_masks[0].hwerrs_to_log =
- INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT;
-
- dd->ipath_eep_st_masks[1].hwerrs_to_log =
- INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
- INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
-
- dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
-
- ipath_linkrecovery = 0;
-
- init_waitqueue_head(&dd->ipath_autoneg_wait);
- INIT_DELAYED_WORK(&dd->ipath_autoneg_work, autoneg_work);
-
- dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
- dd->ipath_link_speed_supported = IPATH_IB_SDR | IPATH_IB_DDR;
-
- dd->ipath_link_width_enabled = dd->ipath_link_width_supported;
- dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
- /*
- * set the initial values to reasonable default, will be set
- * for real when link is up.
- */
- dd->ipath_link_width_active = IB_WIDTH_4X;
- dd->ipath_link_speed_active = IPATH_IB_SDR;
- dd->delay_mult = rate_to_delay[0][1];
-}
-
-
-/*
- * Setup the MSI stuff again after a reset. I'd like to just call
- * pci_enable_msi() and request_irq() again, but when I do that,
- * the MSI enable bit doesn't get set in the command word, and
- * we switch to to a different interrupt vector, which is confusing,
- * so I instead just do it all inline. Perhaps somehow can tie this
- * into the PCIe hotplug support at some point
- * Note, because I'm doing it all here, I don't call pci_disable_msi()
- * or free_irq() at the start of ipath_setup_7220_reset().
- */
-static int ipath_reinit_msi(struct ipath_devdata *dd)
-{
- int ret = 0;
-
- int pos;
- u16 control;
- if (!dd->ipath_msi_lo) /* Using intX, or init problem */
- goto bail;
-
- pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI);
- if (!pos) {
- ipath_dev_err(dd, "Can't find MSI capability, "
- "can't restore MSI settings\n");
- goto bail;
- }
- ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n",
- dd->ipath_msi_lo, pos + PCI_MSI_ADDRESS_LO);
- pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO,
- dd->ipath_msi_lo);
- ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n",
- dd->ipath_msi_hi, pos + PCI_MSI_ADDRESS_HI);
- pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI,
- dd->ipath_msi_hi);
- pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, &control);
- if (!(control & PCI_MSI_FLAGS_ENABLE)) {
- ipath_cdbg(VERBOSE, "MSI control at off %x was %x, "
- "setting MSI enable (%x)\n", pos + PCI_MSI_FLAGS,
- control, control | PCI_MSI_FLAGS_ENABLE);
- control |= PCI_MSI_FLAGS_ENABLE;
- pci_write_config_word(dd->pcidev, pos + PCI_MSI_FLAGS,
- control);
- }
- /* now rewrite the data (vector) info */
- pci_write_config_word(dd->pcidev, pos +
- ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8),
- dd->ipath_msi_data);
- ret = 1;
-
-bail:
- if (!ret) {
- ipath_dbg("Using INTx, MSI disabled or not configured\n");
- ipath_enable_intx(dd->pcidev);
- ret = 1;
- }
- /*
- * We restore the cachelinesize also, although it doesn't really
- * matter.
- */
- pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE,
- dd->ipath_pci_cacheline);
- /* and now set the pci master bit again */
- pci_set_master(dd->pcidev);
-
- return ret;
-}
-
-/*
- * This routine sleeps, so it can only be called from user context, not
- * from interrupt context. If we need interrupt context, we can split
- * it into two routines.
- */
-static int ipath_setup_7220_reset(struct ipath_devdata *dd)
-{
- u64 val;
- int i;
- int ret;
- u16 cmdval;
-
- pci_read_config_word(dd->pcidev, PCI_COMMAND, &cmdval);
-
- /* Use dev_err so it shows up in logs, etc. */
- ipath_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->ipath_unit);
-
- /* keep chip from being accessed in a few places */
- dd->ipath_flags &= ~(IPATH_INITTED | IPATH_PRESENT);
- val = dd->ipath_control | INFINIPATH_C_RESET;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val);
- mb();
-
- for (i = 1; i <= 5; i++) {
- int r;
-
- /*
- * Allow MBIST, etc. to complete; longer on each retry.
- * We sometimes get machine checks from bus timeout if no
- * response, so for now, make it *really* long.
- */
- msleep(1000 + (1 + i) * 2000);
- r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0,
- dd->ipath_pcibar0);
- if (r)
- ipath_dev_err(dd, "rewrite of BAR0 failed: %d\n", r);
- r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1,
- dd->ipath_pcibar1);
- if (r)
- ipath_dev_err(dd, "rewrite of BAR1 failed: %d\n", r);
- /* now re-enable memory access */
- pci_write_config_word(dd->pcidev, PCI_COMMAND, cmdval);
- r = pci_enable_device(dd->pcidev);
- if (r)
- ipath_dev_err(dd, "pci_enable_device failed after "
- "reset: %d\n", r);
- /*
- * whether it fully enabled or not, mark as present,
- * again (but not INITTED)
- */
- dd->ipath_flags |= IPATH_PRESENT;
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
- if (val == dd->ipath_revision) {
- ipath_cdbg(VERBOSE, "Got matching revision "
- "register %llx on try %d\n",
- (unsigned long long) val, i);
- ret = ipath_reinit_msi(dd);
- goto bail;
- }
- /* Probably getting -1 back */
- ipath_dbg("Didn't get expected revision register, "
- "got %llx, try %d\n", (unsigned long long) val,
- i + 1);
- }
- ret = 0; /* failed */
-
-bail:
- if (ret)
- ipath_7220_pcie_params(dd, dd->ipath_boardrev);
-
- return ret;
-}
-
-/**
- * ipath_7220_put_tid - write a TID to the chip
- * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to update
- * @tidtype: 0 for eager, 1 for expected
- * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
- *
- * This exists as a separate routine to allow for selection of the
- * appropriate "flavor". The static calls in cleanup just use the
- * revision-agnostic form, as they are not performance critical.
- */
-static void ipath_7220_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
- u32 type, unsigned long pa)
-{
- if (pa != dd->ipath_tidinvalid) {
- u64 chippa = pa >> IBA7220_TID_PA_SHIFT;
-
- /* paranoia checks */
- if (pa != (chippa << IBA7220_TID_PA_SHIFT)) {
- dev_info(&dd->pcidev->dev, "BUG: physaddr %lx "
- "not 2KB aligned!\n", pa);
- return;
- }
- if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
- ipath_dev_err(dd,
- "BUG: Physical page address 0x%lx "
- "larger than supported\n", pa);
- return;
- }
-
- if (type == RCVHQ_RCV_TYPE_EAGER)
- chippa |= dd->ipath_tidtemplate;
- else /* for now, always full 4KB page */
- chippa |= IBA7220_TID_SZ_4K;
- writeq(chippa, tidptr);
- } else
- writeq(pa, tidptr);
- mmiowb();
-}
-
-/**
- * ipath_7220_clear_tid - clear all TID entries for a port, expected and eager
- * @dd: the infinipath device
- * @port: the port
- *
- * clear all TID entries for a port, expected and eager.
- * Used from ipath_close(). On this chip, TIDs are only 32 bits,
- * not 64, but they are still on 64 bit boundaries, so tidbase
- * is declared as u64 * for the pointer math, even though we write 32 bits
- */
-static void ipath_7220_clear_tids(struct ipath_devdata *dd, unsigned port)
-{
- u64 __iomem *tidbase;
- unsigned long tidinv;
- int i;
-
- if (!dd->ipath_kregbase)
- return;
-
- ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
-
- tidinv = dd->ipath_tidinvalid;
- tidbase = (u64 __iomem *)
- ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvtidbase +
- port * dd->ipath_rcvtidcnt * sizeof(*tidbase));
-
- for (i = 0; i < dd->ipath_rcvtidcnt; i++)
- ipath_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
- tidinv);
-
- tidbase = (u64 __iomem *)
- ((char __iomem *)(dd->ipath_kregbase) +
- dd->ipath_rcvegrbase + port_egrtid_idx(dd, port)
- * sizeof(*tidbase));
-
- for (i = port ? dd->ipath_rcvegrcnt : dd->ipath_p0_rcvegrcnt; i; i--)
- ipath_7220_put_tid(dd, &tidbase[i-1], RCVHQ_RCV_TYPE_EAGER,
- tidinv);
-}
-
-/**
- * ipath_7220_tidtemplate - setup constants for TID updates
- * @dd: the infinipath device
- *
- * We setup stuff that we use a lot, to avoid calculating each time
- */
-static void ipath_7220_tidtemplate(struct ipath_devdata *dd)
-{
- /* For now, we always allocate 4KB buffers (at init) so we can
- * receive max size packets. We may want a module parameter to
- * specify 2KB or 4KB and/or make be per port instead of per device
- * for those who want to reduce memory footprint. Note that the
- * ipath_rcvhdrentsize size must be large enough to hold the largest
- * IB header (currently 96 bytes) that we expect to handle (plus of
- * course the 2 dwords of RHF).
- */
- if (dd->ipath_rcvegrbufsize == 2048)
- dd->ipath_tidtemplate = IBA7220_TID_SZ_2K;
- else if (dd->ipath_rcvegrbufsize == 4096)
- dd->ipath_tidtemplate = IBA7220_TID_SZ_4K;
- else {
- dev_info(&dd->pcidev->dev, "BUG: unsupported egrbufsize "
- "%u, using %u\n", dd->ipath_rcvegrbufsize,
- 4096);
- dd->ipath_tidtemplate = IBA7220_TID_SZ_4K;
- }
- dd->ipath_tidinvalid = 0;
-}
-
-static int ipath_7220_early_init(struct ipath_devdata *dd)
-{
- u32 i, s;
-
- if (strcmp(int_type, "auto") &&
- strcmp(int_type, "force_msi") &&
- strcmp(int_type, "force_intx")) {
- ipath_dev_err(dd, "Invalid interrupt_type: '%s', expecting "
- "auto, force_msi or force_intx\n", int_type);
- return -EINVAL;
- }
-
- /*
- * Control[4] has been added to change the arbitration within
- * the SDMA engine between favoring data fetches over descriptor
- * fetches. ipath_sdma_fetch_arb==0 gives data fetches priority.
- */
- if (ipath_sdma_fetch_arb && (dd->ipath_minrev > 1))
- dd->ipath_control |= 1<<4;
-
- dd->ipath_flags |= IPATH_4BYTE_TID;
-
- /*
- * For openfabrics, we need to be able to handle an IB header of
- * 24 dwords. HT chip has arbitrary sized receive buffers, so we
- * made them the same size as the PIO buffers. This chip does not
- * handle arbitrary size buffers, so we need the header large enough
- * to handle largest IB header, but still have room for a 2KB MTU
- * standard IB packet.
- */
- dd->ipath_rcvhdrentsize = 24;
- dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
- dd->ipath_rhf_offset =
- dd->ipath_rcvhdrentsize - sizeof(u64) / sizeof(u32);
-
- dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048;
- /*
- * the min() check here is currently a nop, but it may not always
- * be, depending on just how we do ipath_rcvegrbufsize
- */
- dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k :
- dd->ipath_piosize2k,
- dd->ipath_rcvegrbufsize +
- (dd->ipath_rcvhdrentsize << 2));
- dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
-
- ipath_7220_config_jint(dd, INFINIPATH_JINT_DEFAULT_IDLE_TICKS,
- INFINIPATH_JINT_DEFAULT_MAX_PACKETS);
-
- if (dd->ipath_boardrev) /* no eeprom on emulator */
- ipath_get_eeprom_info(dd);
-
- /* start of code to check and print procmon */
- s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon));
- s &= ~(1U<<31); /* clear done bit */
- s |= 1U<<14; /* clear counter (write 1 to clear) */
- ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s);
- /* make sure clear_counter low long enough before start */
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
-
- s &= ~(1U<<14); /* allow counter to count (before starting) */
- ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon));
-
- s |= 1U<<15; /* start the counter */
- s &= ~(1U<<31); /* clear done bit */
- s &= ~0x7ffU; /* clear frequency bits */
- s |= 0xe29; /* set frequency bits, in case cleared */
- ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s);
-
- s = 0;
- for (i = 500; i > 0 && !(s&(1ULL<<31)); i--) {
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon));
- }
- if (!(s&(1U<<31)))
- ipath_dev_err(dd, "ProcMon register not valid: 0x%x\n", s);
- else
- ipath_dbg("ProcMon=0x%x, count=0x%x\n", s, (s>>16)&0x1ff);
-
- return 0;
-}
-
-/**
- * ipath_init_7220_get_base_info - set chip-specific flags for user code
- * @pd: the infinipath port
- * @kbase: ipath_base_info pointer
- *
- * We set the PCIE flag because the lower bandwidth on PCIe vs
- * HyperTransport can affect some user packet algorithims.
- */
-static int ipath_7220_get_base_info(struct ipath_portdata *pd, void *kbase)
-{
- struct ipath_base_info *kinfo = kbase;
-
- kinfo->spi_runtime_flags |=
- IPATH_RUNTIME_PCIE | IPATH_RUNTIME_NODMA_RTAIL |
- IPATH_RUNTIME_SDMA;
-
- return 0;
-}
-
-static void ipath_7220_free_irq(struct ipath_devdata *dd)
-{
- free_irq(dd->ipath_irq, dd);
- dd->ipath_irq = 0;
-}
-
-static struct ipath_message_header *
-ipath_7220_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
-{
- u32 offset = ipath_hdrget_offset(rhf_addr);
-
- return (struct ipath_message_header *)
- (rhf_addr - dd->ipath_rhf_offset + offset);
-}
-
-static void ipath_7220_config_ports(struct ipath_devdata *dd, ushort cfgports)
-{
- u32 nchipports;
-
- nchipports = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
- if (!cfgports) {
- int ncpus = num_online_cpus();
-
- if (ncpus <= 4)
- dd->ipath_portcnt = 5;
- else if (ncpus <= 8)
- dd->ipath_portcnt = 9;
- if (dd->ipath_portcnt)
- ipath_dbg("Auto-configured for %u ports, %d cpus "
- "online\n", dd->ipath_portcnt, ncpus);
- } else if (cfgports <= nchipports)
- dd->ipath_portcnt = cfgports;
- if (!dd->ipath_portcnt) /* none of the above, set to max */
- dd->ipath_portcnt = nchipports;
- /*
- * chip can be configured for 5, 9, or 17 ports, and choice
- * affects number of eager TIDs per port (1K, 2K, 4K).
- */
- if (dd->ipath_portcnt > 9)
- dd->ipath_rcvctrl |= 2ULL << IBA7220_R_PORTCFG_SHIFT;
- else if (dd->ipath_portcnt > 5)
- dd->ipath_rcvctrl |= 1ULL << IBA7220_R_PORTCFG_SHIFT;
- /* else configure for default 5 receive ports */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
- dd->ipath_rcvctrl);
- dd->ipath_p0_rcvegrcnt = 2048; /* always */
- if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- dd->ipath_pioreserved = 3; /* kpiobufs used for PIO */
-}
-
-
-static int ipath_7220_get_ib_cfg(struct ipath_devdata *dd, int which)
-{
- int lsb, ret = 0;
- u64 maskr; /* right-justified mask */
-
- switch (which) {
- case IPATH_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
- lsb = IBA7220_IBC_HRTBT_SHIFT;
- maskr = IBA7220_IBC_HRTBT_MASK;
- break;
-
- case IPATH_IB_CFG_LWID_ENB: /* Get allowed Link-width */
- ret = dd->ipath_link_width_enabled;
- goto done;
-
- case IPATH_IB_CFG_LWID: /* Get currently active Link-width */
- ret = dd->ipath_link_width_active;
- goto done;
-
- case IPATH_IB_CFG_SPD_ENB: /* Get allowed Link speeds */
- ret = dd->ipath_link_speed_enabled;
- goto done;
-
- case IPATH_IB_CFG_SPD: /* Get current Link spd */
- ret = dd->ipath_link_speed_active;
- goto done;
-
- case IPATH_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */
- lsb = IBA7220_IBC_RXPOL_SHIFT;
- maskr = IBA7220_IBC_RXPOL_MASK;
- break;
-
- case IPATH_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */
- lsb = IBA7220_IBC_LREV_SHIFT;
- maskr = IBA7220_IBC_LREV_MASK;
- break;
-
- case IPATH_IB_CFG_LINKLATENCY:
- ret = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcddrstatus)
- & IBA7220_DDRSTAT_LINKLAT_MASK;
- goto done;
-
- default:
- ret = -ENOTSUPP;
- goto done;
- }
- ret = (int)((dd->ipath_ibcddrctrl >> lsb) & maskr);
-done:
- return ret;
-}
-
-static int ipath_7220_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
-{
- int lsb, ret = 0, setforce = 0;
- u64 maskr; /* right-justified mask */
-
- switch (which) {
- case IPATH_IB_CFG_LIDLMC:
- /*
- * Set LID and LMC. Combined to avoid possible hazard
- * caller puts LMC in 16MSbits, DLID in 16LSbits of val
- */
- lsb = IBA7220_IBC_DLIDLMC_SHIFT;
- maskr = IBA7220_IBC_DLIDLMC_MASK;
- break;
-
- case IPATH_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
- if (val & IPATH_IB_HRTBT_ON &&
- (dd->ipath_flags & IPATH_NO_HRTBT))
- goto bail;
- lsb = IBA7220_IBC_HRTBT_SHIFT;
- maskr = IBA7220_IBC_HRTBT_MASK;
- break;
-
- case IPATH_IB_CFG_LWID_ENB: /* set allowed Link-width */
- /*
- * As with speed, only write the actual register if
- * the link is currently down, otherwise takes effect
- * on next link change.
- */
- dd->ipath_link_width_enabled = val;
- if ((dd->ipath_flags & (IPATH_LINKDOWN|IPATH_LINKINIT)) !=
- IPATH_LINKDOWN)
- goto bail;
- /*
- * We set the IPATH_IB_FORCE_NOTIFY bit so updown
- * will get called because we want update
- * link_width_active, and the change may not take
- * effect for some time (if we are in POLL), so this
- * flag will force the updown routine to be called
- * on the next ibstatuschange down interrupt, even
- * if it's not an down->up transition.
- */
- val--; /* convert from IB to chip */
- maskr = IBA7220_IBC_WIDTH_MASK;
- lsb = IBA7220_IBC_WIDTH_SHIFT;
- setforce = 1;
- dd->ipath_flags |= IPATH_IB_FORCE_NOTIFY;
- break;
-
- case IPATH_IB_CFG_SPD_ENB: /* set allowed Link speeds */
- /*
- * If we turn off IB1.2, need to preset SerDes defaults,
- * but not right now. Set a flag for the next time
- * we command the link down. As with width, only write the
- * actual register if the link is currently down, otherwise
- * takes effect on next link change. Since setting is being
- * explictly requested (via MAD or sysfs), clear autoneg
- * failure status if speed autoneg is enabled.
- */
- dd->ipath_link_speed_enabled = val;
- if (dd->ipath_ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK &&
- !(val & (val - 1)))
- dd->ipath_presets_needed = 1;
- if ((dd->ipath_flags & (IPATH_LINKDOWN|IPATH_LINKINIT)) !=
- IPATH_LINKDOWN)
- goto bail;
- /*
- * We set the IPATH_IB_FORCE_NOTIFY bit so updown
- * will get called because we want update
- * link_speed_active, and the change may not take
- * effect for some time (if we are in POLL), so this
- * flag will force the updown routine to be called
- * on the next ibstatuschange down interrupt, even
- * if it's not an down->up transition. When setting
- * speed autoneg, clear AUTONEG_FAILED.
- */
- if (val == (IPATH_IB_SDR | IPATH_IB_DDR)) {
- val = IBA7220_IBC_SPEED_AUTONEG_MASK |
- IBA7220_IBC_IBTA_1_2_MASK;
- dd->ipath_flags &= ~IPATH_IB_AUTONEG_FAILED;
- } else
- val = val == IPATH_IB_DDR ? IBA7220_IBC_SPEED_DDR
- : IBA7220_IBC_SPEED_SDR;
- maskr = IBA7220_IBC_SPEED_AUTONEG_MASK |
- IBA7220_IBC_IBTA_1_2_MASK;
- lsb = 0; /* speed bits are low bits */
- setforce = 1;
- break;
-
- case IPATH_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */
- lsb = IBA7220_IBC_RXPOL_SHIFT;
- maskr = IBA7220_IBC_RXPOL_MASK;
- break;
-
- case IPATH_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */
- lsb = IBA7220_IBC_LREV_SHIFT;
- maskr = IBA7220_IBC_LREV_MASK;
- break;
-
- default:
- ret = -ENOTSUPP;
- goto bail;
- }
- dd->ipath_ibcddrctrl &= ~(maskr << lsb);
- dd->ipath_ibcddrctrl |= (((u64) val & maskr) << lsb);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl,
- dd->ipath_ibcddrctrl);
- if (setforce)
- dd->ipath_flags |= IPATH_IB_FORCE_NOTIFY;
-bail:
- return ret;
-}
-
-static void ipath_7220_read_counters(struct ipath_devdata *dd,
- struct infinipath_counters *cntrs)
-{
- u64 *counters = (u64 *) cntrs;
- int i;
-
- for (i = 0; i < sizeof(*cntrs) / sizeof(u64); i++)
- counters[i] = ipath_snap_cntr(dd, i);
-}
-
-/* if we are using MSI, try to fallback to INTx */
-static int ipath_7220_intr_fallback(struct ipath_devdata *dd)
-{
- if (dd->ipath_msi_lo) {
- dev_info(&dd->pcidev->dev, "MSI interrupt not detected,"
- " trying INTx interrupts\n");
- ipath_7220_nomsi(dd);
- ipath_enable_intx(dd->pcidev);
- /*
- * some newer kernels require free_irq before disable_msi,
- * and irq can be changed during disable and intx enable
- * and we need to therefore use the pcidev->irq value,
- * not our saved MSI value.
- */
- dd->ipath_irq = dd->pcidev->irq;
- if (request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
- IPATH_DRV_NAME, dd))
- ipath_dev_err(dd,
- "Could not re-request_irq for INTx\n");
- return 1;
- }
- return 0;
-}
-
-/*
- * reset the XGXS (between serdes and IBC). Slightly less intrusive
- * than resetting the IBC or external link state, and useful in some
- * cases to cause some retraining. To do this right, we reset IBC
- * as well.
- */
-static void ipath_7220_xgxs_reset(struct ipath_devdata *dd)
-{
- u64 val, prev_val;
-
- prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
- val = prev_val | INFINIPATH_XGXS_RESET;
- prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
- dd->ipath_control);
-}
-
-
-/* Still needs cleanup, too much hardwired stuff */
-static void autoneg_send(struct ipath_devdata *dd,
- u32 *hdr, u32 dcnt, u32 *data)
-{
- int i;
- u64 cnt;
- u32 __iomem *piobuf;
- u32 pnum;
-
- i = 0;
- cnt = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */
- while (!(piobuf = ipath_getpiobuf(dd, cnt, &pnum))) {
- if (i++ > 15) {
- ipath_dbg("Couldn't get pio buffer for send\n");
- return;
- }
- udelay(2);
- }
- if (dd->ipath_flags&IPATH_HAS_PBC_CNT)
- cnt |= 0x80000000UL<<32; /* mark as VL15 */
- writeq(cnt, piobuf);
- ipath_flush_wc();
- __iowrite32_copy(piobuf + 2, hdr, 7);
- __iowrite32_copy(piobuf + 9, data, dcnt);
- ipath_flush_wc();
-}
-
-/*
- * _start packet gets sent twice at start, _done gets sent twice at end
- */
-static void ipath_autoneg_send(struct ipath_devdata *dd, int which)
-{
- static u32 swapped;
- u32 dw, i, hcnt, dcnt, *data;
- static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba };
- static u32 madpayload_start[0x40] = {
- 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
- 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
- 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */
- };
- static u32 madpayload_done[0x40] = {
- 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
- 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
- 0x40000001, 0x1388, 0x15e, /* rest 0's */
- };
- dcnt = ARRAY_SIZE(madpayload_start);
- hcnt = ARRAY_SIZE(hdr);
- if (!swapped) {
- /* for maintainability, do it at runtime */
- for (i = 0; i < hcnt; i++) {
- dw = (__force u32) cpu_to_be32(hdr[i]);
- hdr[i] = dw;
- }
- for (i = 0; i < dcnt; i++) {
- dw = (__force u32) cpu_to_be32(madpayload_start[i]);
- madpayload_start[i] = dw;
- dw = (__force u32) cpu_to_be32(madpayload_done[i]);
- madpayload_done[i] = dw;
- }
- swapped = 1;
- }
-
- data = which ? madpayload_done : madpayload_start;
- ipath_cdbg(PKT, "Sending %s special MADs\n", which?"done":"start");
-
- autoneg_send(dd, hdr, dcnt, data);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- udelay(2);
- autoneg_send(dd, hdr, dcnt, data);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- udelay(2);
-}
-
-
-
-/*
- * Do the absolute minimum to cause an IB speed change, and make it
- * ready, but don't actually trigger the change. The caller will
- * do that when ready (if link is in Polling training state, it will
- * happen immediately, otherwise when link next goes down)
- *
- * This routine should only be used as part of the DDR autonegotation
- * code for devices that are not compliant with IB 1.2 (or code that
- * fixes things up for same).
- *
- * When link has gone down, and autoneg enabled, or autoneg has
- * failed and we give up until next time we set both speeds, and
- * then we want IBTA enabled as well as "use max enabled speed.
- */
-static void set_speed_fast(struct ipath_devdata *dd, u32 speed)
-{
- dd->ipath_ibcddrctrl &= ~(IBA7220_IBC_SPEED_AUTONEG_MASK |
- IBA7220_IBC_IBTA_1_2_MASK |
- (IBA7220_IBC_WIDTH_MASK << IBA7220_IBC_WIDTH_SHIFT));
-
- if (speed == (IPATH_IB_SDR | IPATH_IB_DDR))
- dd->ipath_ibcddrctrl |= IBA7220_IBC_SPEED_AUTONEG_MASK |
- IBA7220_IBC_IBTA_1_2_MASK;
- else
- dd->ipath_ibcddrctrl |= speed == IPATH_IB_DDR ?
- IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
-
- /*
- * Convert from IB-style 1 = 1x, 2 = 4x, 3 = auto
- * to chip-centric 0 = 1x, 1 = 4x, 2 = auto
- */
- dd->ipath_ibcddrctrl |= (u64)(dd->ipath_link_width_enabled - 1) <<
- IBA7220_IBC_WIDTH_SHIFT;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl,
- dd->ipath_ibcddrctrl);
- ipath_cdbg(VERBOSE, "setup for IB speed (%x) done\n", speed);
-}
-
-
-/*
- * this routine is only used when we are not talking to another
- * IB 1.2-compliant device that we think can do DDR.
- * (This includes all existing switch chips as of Oct 2007.)
- * 1.2-compliant devices go directly to DDR prior to reaching INIT
- */
-static void try_auto_neg(struct ipath_devdata *dd)
-{
- /*
- * required for older non-IB1.2 DDR switches. Newer
- * non-IB-compliant switches don't need it, but so far,
- * aren't bothered by it either. "Magic constant"
- */
- ipath_write_kreg(dd, IPATH_KREG_OFFSET(IBNCModeCtrl),
- 0x3b9dc07);
- dd->ipath_flags |= IPATH_IB_AUTONEG_INPROG;
- ipath_autoneg_send(dd, 0);
- set_speed_fast(dd, IPATH_IB_DDR);
- ipath_toggle_rclkrls(dd);
- /* 2 msec is minimum length of a poll cycle */
- schedule_delayed_work(&dd->ipath_autoneg_work,
- msecs_to_jiffies(2));
-}
-
-
-static int ipath_7220_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
-{
- int ret = 0, symadj = 0;
- u32 ltstate = ipath_ib_linkstate(dd, ibcs);
-
- dd->ipath_link_width_active =
- ((ibcs >> IBA7220_IBCS_LINKWIDTH_SHIFT) & 1) ?
- IB_WIDTH_4X : IB_WIDTH_1X;
- dd->ipath_link_speed_active =
- ((ibcs >> IBA7220_IBCS_LINKSPEED_SHIFT) & 1) ?
- IPATH_IB_DDR : IPATH_IB_SDR;
-
- if (!ibup) {
- /*
- * when link goes down we don't want aeq running, so it
- * won't't interfere with IBC training, etc., and we need
- * to go back to the static SerDes preset values
- */
- if (dd->ipath_x1_fix_tries &&
- ltstate <= INFINIPATH_IBCS_LT_STATE_SLEEPQUIET &&
- ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP)
- dd->ipath_x1_fix_tries = 0;
- if (!(dd->ipath_flags & (IPATH_IB_AUTONEG_FAILED |
- IPATH_IB_AUTONEG_INPROG)))
- set_speed_fast(dd, dd->ipath_link_speed_enabled);
- if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)) {
- ipath_cdbg(VERBOSE, "Setting RXEQ defaults\n");
- ipath_sd7220_presets(dd);
- }
- /* this might better in ipath_sd7220_presets() */
- ipath_set_relock_poll(dd, ibup);
- } else {
- if (ipath_compat_ddr_negotiate &&
- !(dd->ipath_flags & (IPATH_IB_AUTONEG_FAILED |
- IPATH_IB_AUTONEG_INPROG)) &&
- dd->ipath_link_speed_active == IPATH_IB_SDR &&
- (dd->ipath_link_speed_enabled &
- (IPATH_IB_DDR | IPATH_IB_SDR)) ==
- (IPATH_IB_DDR | IPATH_IB_SDR) &&
- dd->ipath_autoneg_tries < IPATH_AUTONEG_TRIES) {
- /* we are SDR, and DDR auto-negotiation enabled */
- ++dd->ipath_autoneg_tries;
- ipath_dbg("DDR negotiation try, %u/%u\n",
- dd->ipath_autoneg_tries,
- IPATH_AUTONEG_TRIES);
- if (!dd->ibdeltainprog) {
- dd->ibdeltainprog = 1;
- dd->ibsymsnap = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt);
- dd->iblnkerrsnap = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- }
- try_auto_neg(dd);
- ret = 1; /* no other IB status change processing */
- } else if ((dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)
- && dd->ipath_link_speed_active == IPATH_IB_SDR) {
- ipath_autoneg_send(dd, 1);
- set_speed_fast(dd, IPATH_IB_DDR);
- udelay(2);
- ipath_toggle_rclkrls(dd);
- ret = 1; /* no other IB status change processing */
- } else {
- if ((dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) &&
- (dd->ipath_link_speed_active & IPATH_IB_DDR)) {
- ipath_dbg("Got to INIT with DDR autoneg\n");
- dd->ipath_flags &= ~(IPATH_IB_AUTONEG_INPROG
- | IPATH_IB_AUTONEG_FAILED);
- dd->ipath_autoneg_tries = 0;
- /* re-enable SDR, for next link down */
- set_speed_fast(dd,
- dd->ipath_link_speed_enabled);
- wake_up(&dd->ipath_autoneg_wait);
- symadj = 1;
- } else if (dd->ipath_flags & IPATH_IB_AUTONEG_FAILED) {
- /*
- * clear autoneg failure flag, and do setup
- * so we'll try next time link goes down and
- * back to INIT (possibly connected to different
- * device).
- */
- ipath_dbg("INIT %sDR after autoneg failure\n",
- (dd->ipath_link_speed_active &
- IPATH_IB_DDR) ? "D" : "S");
- dd->ipath_flags &= ~IPATH_IB_AUTONEG_FAILED;
- dd->ipath_ibcddrctrl |=
- IBA7220_IBC_IBTA_1_2_MASK;
- ipath_write_kreg(dd,
- IPATH_KREG_OFFSET(IBNCModeCtrl), 0);
- symadj = 1;
- }
- }
- /*
- * if we are in 1X on rev1 only, and are in autoneg width,
- * it could be due to an xgxs problem, so if we haven't
- * already tried, try twice to get to 4X; if we
- * tried, and couldn't, report it, since it will
- * probably not be what is desired.
- */
- if (dd->ipath_minrev == 1 &&
- (dd->ipath_link_width_enabled & (IB_WIDTH_1X |
- IB_WIDTH_4X)) == (IB_WIDTH_1X | IB_WIDTH_4X)
- && dd->ipath_link_width_active == IB_WIDTH_1X
- && dd->ipath_x1_fix_tries < 3) {
- if (++dd->ipath_x1_fix_tries == 3) {
- dev_info(&dd->pcidev->dev,
- "IB link is in 1X mode\n");
- if (!(dd->ipath_flags &
- IPATH_IB_AUTONEG_INPROG))
- symadj = 1;
- }
- else {
- ipath_cdbg(VERBOSE, "IB 1X in "
- "auto-width, try %u to be "
- "sure it's really 1X; "
- "ltstate %u\n",
- dd->ipath_x1_fix_tries,
- ltstate);
- dd->ipath_f_xgxs_reset(dd);
- ret = 1; /* skip other processing */
- }
- } else if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG))
- symadj = 1;
-
- if (!ret) {
- dd->delay_mult = rate_to_delay
- [(ibcs >> IBA7220_IBCS_LINKSPEED_SHIFT) & 1]
- [(ibcs >> IBA7220_IBCS_LINKWIDTH_SHIFT) & 1];
-
- ipath_set_relock_poll(dd, ibup);
- }
- }
-
- if (symadj) {
- if (dd->ibdeltainprog) {
- dd->ibdeltainprog = 0;
- dd->ibsymdelta += ipath_read_creg32(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt) -
- dd->ibsymsnap;
- dd->iblnkerrdelta += ipath_read_creg32(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt) -
- dd->iblnkerrsnap;
- }
- } else if (!ibup && !dd->ibdeltainprog
- && !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)) {
- dd->ibdeltainprog = 1;
- dd->ibsymsnap = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_ibsymbolerrcnt);
- dd->iblnkerrsnap = ipath_read_creg32(dd,
- dd->ipath_cregs->cr_iblinkerrrecovcnt);
- }
-
- if (!ret)
- ipath_setup_7220_setextled(dd, ipath_ib_linkstate(dd, ibcs),
- ltstate);
- return ret;
-}
-
-
-/*
- * Handle the empirically determined mechanism for auto-negotiation
- * of DDR speed with switches.
- */
-static void autoneg_work(struct work_struct *work)
-{
- struct ipath_devdata *dd;
- u64 startms;
- u32 lastlts, i;
-
- dd = container_of(work, struct ipath_devdata,
- ipath_autoneg_work.work);
-
- startms = jiffies_to_msecs(jiffies);
-
- /*
- * busy wait for this first part, it should be at most a
- * few hundred usec, since we scheduled ourselves for 2msec.
- */
- for (i = 0; i < 25; i++) {
- lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
- if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN_DISABLE);
- break;
- }
- udelay(100);
- }
-
- if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG))
- goto done; /* we got there early or told to stop */
-
- /* we expect this to timeout */
- if (wait_event_timeout(dd->ipath_autoneg_wait,
- !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG),
- msecs_to_jiffies(90)))
- goto done;
-
- ipath_toggle_rclkrls(dd);
-
- /* we expect this to timeout */
- if (wait_event_timeout(dd->ipath_autoneg_wait,
- !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG),
- msecs_to_jiffies(1700)))
- goto done;
-
- set_speed_fast(dd, IPATH_IB_SDR);
- ipath_toggle_rclkrls(dd);
-
- /*
- * wait up to 250 msec for link to train and get to INIT at DDR;
- * this should terminate early
- */
- wait_event_timeout(dd->ipath_autoneg_wait,
- !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG),
- msecs_to_jiffies(250));
-done:
- if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
- ipath_dbg("Did not get to DDR INIT (%x) after %Lu msecs\n",
- ipath_ib_state(dd, dd->ipath_lastibcstat),
- (unsigned long long) jiffies_to_msecs(jiffies)-startms);
- dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG;
- if (dd->ipath_autoneg_tries == IPATH_AUTONEG_TRIES) {
- dd->ipath_flags |= IPATH_IB_AUTONEG_FAILED;
- ipath_dbg("Giving up on DDR until next IB "
- "link Down\n");
- dd->ipath_autoneg_tries = 0;
- }
- set_speed_fast(dd, dd->ipath_link_speed_enabled);
- }
-}
-
-
-/**
- * ipath_init_iba7220_funcs - set up the chip-specific function pointers
- * @dd: the infinipath device
- *
- * This is global, and is called directly at init to set up the
- * chip-specific function pointers for later use.
- */
-void ipath_init_iba7220_funcs(struct ipath_devdata *dd)
-{
- dd->ipath_f_intrsetup = ipath_7220_intconfig;
- dd->ipath_f_bus = ipath_setup_7220_config;
- dd->ipath_f_reset = ipath_setup_7220_reset;
- dd->ipath_f_get_boardname = ipath_7220_boardname;
- dd->ipath_f_init_hwerrors = ipath_7220_init_hwerrors;
- dd->ipath_f_early_init = ipath_7220_early_init;
- dd->ipath_f_handle_hwerrors = ipath_7220_handle_hwerrors;
- dd->ipath_f_quiet_serdes = ipath_7220_quiet_serdes;
- dd->ipath_f_bringup_serdes = ipath_7220_bringup_serdes;
- dd->ipath_f_clear_tids = ipath_7220_clear_tids;
- dd->ipath_f_put_tid = ipath_7220_put_tid;
- dd->ipath_f_cleanup = ipath_setup_7220_cleanup;
- dd->ipath_f_setextled = ipath_setup_7220_setextled;
- dd->ipath_f_get_base_info = ipath_7220_get_base_info;
- dd->ipath_f_free_irq = ipath_7220_free_irq;
- dd->ipath_f_tidtemplate = ipath_7220_tidtemplate;
- dd->ipath_f_intr_fallback = ipath_7220_intr_fallback;
- dd->ipath_f_xgxs_reset = ipath_7220_xgxs_reset;
- dd->ipath_f_get_ib_cfg = ipath_7220_get_ib_cfg;
- dd->ipath_f_set_ib_cfg = ipath_7220_set_ib_cfg;
- dd->ipath_f_config_jint = ipath_7220_config_jint;
- dd->ipath_f_config_ports = ipath_7220_config_ports;
- dd->ipath_f_read_counters = ipath_7220_read_counters;
- dd->ipath_f_get_msgheader = ipath_7220_get_msgheader;
- dd->ipath_f_ib_updown = ipath_7220_ib_updown;
-
- /* initialize chip-specific variables */
- ipath_init_7220_variables(dd);
-}
u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *);
void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
unsigned len, int avail);
-void ipath_init_iba7220_funcs(struct ipath_devdata *);
-void ipath_init_iba6120_funcs(struct ipath_devdata *);
void ipath_init_iba6110_funcs(struct ipath_devdata *);
void ipath_get_eeprom_info(struct ipath_devdata *);
int ipath_update_eeprom_log(struct ipath_devdata *dd);
+++ /dev/null
-/*
- * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
- * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-/*
- * This file contains all of the code that is specific to the SerDes
- * on the InfiniPath 7220 chip.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "ipath_kernel.h"
-#include "ipath_registers.h"
-#include "ipath_7220.h"
-
-/*
- * The IBSerDesMappTable is a memory that holds values to be stored in
- * various SerDes registers by IBC. It is not part of the normal kregs
- * map and is used in exactly one place, hence the #define below.
- */
-#define KR_IBSerDesMappTable (0x94000 / (sizeof(uint64_t)))
-
-/*
- * Below used for sdnum parameter, selecting one of the two sections
- * used for PCIe, or the single SerDes used for IB.
- */
-#define PCIE_SERDES0 0
-#define PCIE_SERDES1 1
-
-/*
- * The EPB requires addressing in a particular form. EPB_LOC() is intended
- * to make #definitions a little more readable.
- */
-#define EPB_ADDR_SHF 8
-#define EPB_LOC(chn, elt, reg) \
- (((elt & 0xf) | ((chn & 7) << 4) | ((reg & 0x3f) << 9)) << \
- EPB_ADDR_SHF)
-#define EPB_IB_QUAD0_CS_SHF (25)
-#define EPB_IB_QUAD0_CS (1U << EPB_IB_QUAD0_CS_SHF)
-#define EPB_IB_UC_CS_SHF (26)
-#define EPB_PCIE_UC_CS_SHF (27)
-#define EPB_GLOBAL_WR (1U << (EPB_ADDR_SHF + 8))
-
-/* Forward declarations. */
-static int ipath_sd7220_reg_mod(struct ipath_devdata *dd, int sdnum, u32 loc,
- u32 data, u32 mask);
-static int ibsd_mod_allchnls(struct ipath_devdata *dd, int loc, int val,
- int mask);
-static int ipath_sd_trimdone_poll(struct ipath_devdata *dd);
-static void ipath_sd_trimdone_monitor(struct ipath_devdata *dd,
- const char *where);
-static int ipath_sd_setvals(struct ipath_devdata *dd);
-static int ipath_sd_early(struct ipath_devdata *dd);
-static int ipath_sd_dactrim(struct ipath_devdata *dd);
-/* Set the registers that IBC may muck with to their default "preset" values */
-int ipath_sd7220_presets(struct ipath_devdata *dd);
-static int ipath_internal_presets(struct ipath_devdata *dd);
-/* Tweak the register (CMUCTRL5) that contains the TRIMSELF controls */
-static int ipath_sd_trimself(struct ipath_devdata *dd, int val);
-static int epb_access(struct ipath_devdata *dd, int sdnum, int claim);
-
-void ipath_set_relock_poll(struct ipath_devdata *dd, int ibup);
-
-/*
- * Below keeps track of whether the "once per power-on" initialization has
- * been done, because uC code Version 1.32.17 or higher allows the uC to
- * be reset at will, and Automatic Equalization may require it. So the
- * state of the reset "pin", as reflected in was_reset parameter to
- * ipath_sd7220_init() is no longer valid. Instead, we check for the
- * actual uC code having been loaded.
- */
-static int ipath_ibsd_ucode_loaded(struct ipath_devdata *dd)
-{
- if (!dd->serdes_first_init_done && (ipath_sd7220_ib_vfy(dd) > 0))
- dd->serdes_first_init_done = 1;
- return dd->serdes_first_init_done;
-}
-
-/* repeat #define for local use. "Real" #define is in ipath_iba7220.c */
-#define INFINIPATH_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL
-#define IB_MPREG5 (EPB_LOC(6, 0, 0xE) | (1L << EPB_IB_UC_CS_SHF))
-#define IB_MPREG6 (EPB_LOC(6, 0, 0xF) | (1U << EPB_IB_UC_CS_SHF))
-#define UC_PAR_CLR_D 8
-#define UC_PAR_CLR_M 0xC
-#define IB_CTRL2(chn) (EPB_LOC(chn, 7, 3) | EPB_IB_QUAD0_CS)
-#define START_EQ1(chan) EPB_LOC(chan, 7, 0x27)
-
-void ipath_sd7220_clr_ibpar(struct ipath_devdata *dd)
-{
- int ret;
-
- /* clear, then re-enable parity errs */
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6,
- UC_PAR_CLR_D, UC_PAR_CLR_M);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed clearing IBSerDes Parity err\n");
- goto bail;
- }
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0,
- UC_PAR_CLR_M);
-
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- udelay(4);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
- INFINIPATH_HWE_IB_UC_MEMORYPARITYERR);
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
-bail:
- return;
-}
-
-/*
- * After a reset or other unusual event, the epb interface may need
- * to be re-synchronized, between the host and the uC.
- * returns <0 for failure to resync within IBSD_RESYNC_TRIES (not expected)
- */
-#define IBSD_RESYNC_TRIES 3
-#define IB_PGUDP(chn) (EPB_LOC((chn), 2, 1) | EPB_IB_QUAD0_CS)
-#define IB_CMUDONE(chn) (EPB_LOC((chn), 7, 0xF) | EPB_IB_QUAD0_CS)
-
-static int ipath_resync_ibepb(struct ipath_devdata *dd)
-{
- int ret, pat, tries, chn;
- u32 loc;
-
- ret = -1;
- chn = 0;
- for (tries = 0; tries < (4 * IBSD_RESYNC_TRIES); ++tries) {
- loc = IB_PGUDP(chn);
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed read in resync\n");
- continue;
- }
- if (ret != 0xF0 && ret != 0x55 && tries == 0)
- ipath_dev_err(dd, "unexpected pattern in resync\n");
- pat = ret ^ 0xA5; /* alternate F0 and 55 */
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, pat, 0xFF);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed write in resync\n");
- continue;
- }
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed re-read in resync\n");
- continue;
- }
- if (ret != pat) {
- ipath_dev_err(dd, "Failed compare1 in resync\n");
- continue;
- }
- loc = IB_CMUDONE(chn);
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed CMUDONE rd in resync\n");
- continue;
- }
- if ((ret & 0x70) != ((chn << 4) | 0x40)) {
- ipath_dev_err(dd, "Bad CMUDONE value %02X, chn %d\n",
- ret, chn);
- continue;
- }
- if (++chn == 4)
- break; /* Success */
- }
- ipath_cdbg(VERBOSE, "Resync in %d tries\n", tries);
- return (ret > 0) ? 0 : ret;
-}
-
-/*
- * Localize the stuff that should be done to change IB uC reset
- * returns <0 for errors.
- */
-static int ipath_ibsd_reset(struct ipath_devdata *dd, int assert_rst)
-{
- u64 rst_val;
- int ret = 0;
- unsigned long flags;
-
- rst_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl);
- if (assert_rst) {
- /*
- * Vendor recommends "interrupting" uC before reset, to
- * minimize possible glitches.
- */
- spin_lock_irqsave(&dd->ipath_sdepb_lock, flags);
- epb_access(dd, IB_7220_SERDES, 1);
- rst_val |= 1ULL;
- /* Squelch possible parity error from _asserting_ reset */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask &
- ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, rst_val);
- /* flush write, delay to ensure it took effect */
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- udelay(2);
- /* once it's reset, can remove interrupt */
- epb_access(dd, IB_7220_SERDES, -1);
- spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
- } else {
- /*
- * Before we de-assert reset, we need to deal with
- * possible glitch on the Parity-error line.
- * Suppress it around the reset, both in chip-level
- * hwerrmask and in IB uC control reg. uC will allow
- * it again during startup.
- */
- u64 val;
- rst_val &= ~(1ULL);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask &
- ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR);
-
- ret = ipath_resync_ibepb(dd);
- if (ret < 0)
- ipath_dev_err(dd, "unable to re-sync IB EPB\n");
-
- /* set uC control regs to suppress parity errs */
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG5, 1, 1);
- if (ret < 0)
- goto bail;
- /* IB uC code past Version 1.32.17 allow suppression of wdog */
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80,
- 0x80);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed to set WDOG disable\n");
- goto bail;
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, rst_val);
- /* flush write, delay for startup */
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- udelay(1);
- /* clear, then re-enable parity errs */
- ipath_sd7220_clr_ibpar(dd);
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
- if (val & INFINIPATH_HWE_IB_UC_MEMORYPARITYERR) {
- ipath_dev_err(dd, "IBUC Parity still set after RST\n");
- dd->ipath_hwerrmask &=
- ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR;
- }
- ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
- dd->ipath_hwerrmask);
- }
-
-bail:
- return ret;
-}
-
-static void ipath_sd_trimdone_monitor(struct ipath_devdata *dd,
- const char *where)
-{
- int ret, chn, baduns;
- u64 val;
-
- if (!where)
- where = "?";
-
- /* give time for reset to settle out in EPB */
- udelay(2);
-
- ret = ipath_resync_ibepb(dd);
- if (ret < 0)
- ipath_dev_err(dd, "not able to re-sync IB EPB (%s)\n", where);
-
- /* Do "sacrificial read" to get EPB in sane state after reset */
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_CTRL2(0), 0, 0);
- if (ret < 0)
- ipath_dev_err(dd, "Failed TRIMDONE 1st read, (%s)\n", where);
-
- /* Check/show "summary" Trim-done bit in IBCStatus */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- if (val & (1ULL << 11))
- ipath_cdbg(VERBOSE, "IBCS TRIMDONE set (%s)\n", where);
- else
- ipath_dev_err(dd, "IBCS TRIMDONE clear (%s)\n", where);
-
- udelay(2);
-
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80, 0x80);
- if (ret < 0)
- ipath_dev_err(dd, "Failed Dummy RMW, (%s)\n", where);
- udelay(10);
-
- baduns = 0;
-
- for (chn = 3; chn >= 0; --chn) {
- /* Read CTRL reg for each channel to check TRIMDONE */
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
- IB_CTRL2(chn), 0, 0);
- if (ret < 0)
- ipath_dev_err(dd, "Failed checking TRIMDONE, chn %d"
- " (%s)\n", chn, where);
-
- if (!(ret & 0x10)) {
- int probe;
- baduns |= (1 << chn);
- ipath_dev_err(dd, "TRIMDONE cleared on chn %d (%02X)."
- " (%s)\n", chn, ret, where);
- probe = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
- IB_PGUDP(0), 0, 0);
- ipath_dev_err(dd, "probe is %d (%02X)\n",
- probe, probe);
- probe = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
- IB_CTRL2(chn), 0, 0);
- ipath_dev_err(dd, "re-read: %d (%02X)\n",
- probe, probe);
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
- IB_CTRL2(chn), 0x10, 0x10);
- if (ret < 0)
- ipath_dev_err(dd,
- "Err on TRIMDONE rewrite1\n");
- }
- }
- for (chn = 3; chn >= 0; --chn) {
- /* Read CTRL reg for each channel to check TRIMDONE */
- if (baduns & (1 << chn)) {
- ipath_dev_err(dd,
- "Reseting TRIMDONE on chn %d (%s)\n",
- chn, where);
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
- IB_CTRL2(chn), 0x10, 0x10);
- if (ret < 0)
- ipath_dev_err(dd, "Failed re-setting "
- "TRIMDONE, chn %d (%s)\n",
- chn, where);
- }
- }
-}
-
-/*
- * Below is portion of IBA7220-specific bringup_serdes() that actually
- * deals with registers and memory within the SerDes itself.
- * Post IB uC code version 1.32.17, was_reset being 1 is not really
- * informative, so we double-check.
- */
-int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset)
-{
- int ret = 1; /* default to failure */
- int first_reset;
- int val_stat;
-
- if (!was_reset) {
- /* entered with reset not asserted, we need to do it */
- ipath_ibsd_reset(dd, 1);
- ipath_sd_trimdone_monitor(dd, "Driver-reload");
- }
-
- /* Substitute our deduced value for was_reset */
- ret = ipath_ibsd_ucode_loaded(dd);
- if (ret < 0) {
- ret = 1;
- goto done;
- }
- first_reset = !ret; /* First reset if IBSD uCode not yet loaded */
-
- /*
- * Alter some regs per vendor latest doc, reset-defaults
- * are not right for IB.
- */
- ret = ipath_sd_early(dd);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed to set IB SERDES early defaults\n");
- ret = 1;
- goto done;
- }
-
- /*
- * Set DAC manual trim IB.
- * We only do this once after chip has been reset (usually
- * same as once per system boot).
- */
- if (first_reset) {
- ret = ipath_sd_dactrim(dd);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed IB SERDES DAC trim\n");
- ret = 1;
- goto done;
- }
- }
-
- /*
- * Set various registers (DDS and RXEQ) that will be
- * controlled by IBC (in 1.2 mode) to reasonable preset values
- * Calling the "internal" version avoids the "check for needed"
- * and "trimdone monitor" that might be counter-productive.
- */
- ret = ipath_internal_presets(dd);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed to set IB SERDES presets\n");
- ret = 1;
- goto done;
- }
- ret = ipath_sd_trimself(dd, 0x80);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed to set IB SERDES TRIMSELF\n");
- ret = 1;
- goto done;
- }
-
- /* Load image, then try to verify */
- ret = 0; /* Assume success */
- if (first_reset) {
- int vfy;
- int trim_done;
- ipath_dbg("SerDes uC was reset, reloading PRAM\n");
- ret = ipath_sd7220_ib_load(dd);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed to load IB SERDES image\n");
- ret = 1;
- goto done;
- }
-
- /* Loaded image, try to verify */
- vfy = ipath_sd7220_ib_vfy(dd);
- if (vfy != ret) {
- ipath_dev_err(dd, "SERDES PRAM VFY failed\n");
- ret = 1;
- goto done;
- }
- /*
- * Loaded and verified. Almost good...
- * hold "success" in ret
- */
- ret = 0;
-
- /*
- * Prev steps all worked, continue bringup
- * De-assert RESET to uC, only in first reset, to allow
- * trimming.
- *
- * Since our default setup sets START_EQ1 to
- * PRESET, we need to clear that for this very first run.
- */
- ret = ibsd_mod_allchnls(dd, START_EQ1(0), 0, 0x38);
- if (ret < 0) {
- ipath_dev_err(dd, "Failed clearing START_EQ1\n");
- ret = 1;
- goto done;
- }
-
- ipath_ibsd_reset(dd, 0);
- /*
- * If this is not the first reset, trimdone should be set
- * already.
- */
- trim_done = ipath_sd_trimdone_poll(dd);
- /*
- * Whether or not trimdone succeeded, we need to put the
- * uC back into reset to avoid a possible fight with the
- * IBC state-machine.
- */
- ipath_ibsd_reset(dd, 1);
-
- if (!trim_done) {
- ipath_dev_err(dd, "No TRIMDONE seen\n");
- ret = 1;
- goto done;
- }
-
- ipath_sd_trimdone_monitor(dd, "First-reset");
- /* Remember so we do not re-do the load, dactrim, etc. */
- dd->serdes_first_init_done = 1;
- }
- /*
- * Setup for channel training and load values for
- * RxEq and DDS in tables used by IBC in IB1.2 mode
- */
-
- val_stat = ipath_sd_setvals(dd);
- if (val_stat < 0)
- ret = 1;
-done:
- /* start relock timer regardless, but start at 1 second */
- ipath_set_relock_poll(dd, -1);
- return ret;
-}
-
-#define EPB_ACC_REQ 1
-#define EPB_ACC_GNT 0x100
-#define EPB_DATA_MASK 0xFF
-#define EPB_RD (1ULL << 24)
-#define EPB_TRANS_RDY (1ULL << 31)
-#define EPB_TRANS_ERR (1ULL << 30)
-#define EPB_TRANS_TRIES 5
-
-/*
- * query, claim, release ownership of the EPB (External Parallel Bus)
- * for a specified SERDES.
- * the "claim" parameter is >0 to claim, <0 to release, 0 to query.
- * Returns <0 for errors, >0 if we had ownership, else 0.
- */
-static int epb_access(struct ipath_devdata *dd, int sdnum, int claim)
-{
- u16 acc;
- u64 accval;
- int owned = 0;
- u64 oct_sel = 0;
-
- switch (sdnum) {
- case IB_7220_SERDES :
- /*
- * The IB SERDES "ownership" is fairly simple. A single each
- * request/grant.
- */
- acc = dd->ipath_kregs->kr_ib_epbacc;
- break;
- case PCIE_SERDES0 :
- case PCIE_SERDES1 :
- /* PCIe SERDES has two "octants", need to select which */
- acc = dd->ipath_kregs->kr_pcie_epbacc;
- oct_sel = (2 << (sdnum - PCIE_SERDES0));
- break;
- default :
- return 0;
- }
-
- /* Make sure any outstanding transaction was seen */
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- udelay(15);
-
- accval = ipath_read_kreg32(dd, acc);
-
- owned = !!(accval & EPB_ACC_GNT);
- if (claim < 0) {
- /* Need to release */
- u64 pollval;
- /*
- * The only writeable bits are the request and CS.
- * Both should be clear
- */
- u64 newval = 0;
- ipath_write_kreg(dd, acc, newval);
- /* First read after write is not trustworthy */
- pollval = ipath_read_kreg32(dd, acc);
- udelay(5);
- pollval = ipath_read_kreg32(dd, acc);
- if (pollval & EPB_ACC_GNT)
- owned = -1;
- } else if (claim > 0) {
- /* Need to claim */
- u64 pollval;
- u64 newval = EPB_ACC_REQ | oct_sel;
- ipath_write_kreg(dd, acc, newval);
- /* First read after write is not trustworthy */
- pollval = ipath_read_kreg32(dd, acc);
- udelay(5);
- pollval = ipath_read_kreg32(dd, acc);
- if (!(pollval & EPB_ACC_GNT))
- owned = -1;
- }
- return owned;
-}
-
-/*
- * Lemma to deal with race condition of write..read to epb regs
- */
-static int epb_trans(struct ipath_devdata *dd, u16 reg, u64 i_val, u64 *o_vp)
-{
- int tries;
- u64 transval;
-
-
- ipath_write_kreg(dd, reg, i_val);
- /* Throw away first read, as RDY bit may be stale */
- transval = ipath_read_kreg64(dd, reg);
-
- for (tries = EPB_TRANS_TRIES; tries; --tries) {
- transval = ipath_read_kreg32(dd, reg);
- if (transval & EPB_TRANS_RDY)
- break;
- udelay(5);
- }
- if (transval & EPB_TRANS_ERR)
- return -1;
- if (tries > 0 && o_vp)
- *o_vp = transval;
- return tries;
-}
-
-/**
- *
- * ipath_sd7220_reg_mod - modify SERDES register
- * @dd: the infinipath device
- * @sdnum: which SERDES to access
- * @loc: location - channel, element, register, as packed by EPB_LOC() macro.
- * @wd: Write Data - value to set in register
- * @mask: ones where data should be spliced into reg.
- *
- * Basic register read/modify/write, with un-needed accesses elided. That is,
- * a mask of zero will prevent write, while a mask of 0xFF will prevent read.
- * returns current (presumed, if a write was done) contents of selected
- * register, or <0 if errors.
- */
-static int ipath_sd7220_reg_mod(struct ipath_devdata *dd, int sdnum, u32 loc,
- u32 wd, u32 mask)
-{
- u16 trans;
- u64 transval;
- int owned;
- int tries, ret;
- unsigned long flags;
-
- switch (sdnum) {
- case IB_7220_SERDES :
- trans = dd->ipath_kregs->kr_ib_epbtrans;
- break;
- case PCIE_SERDES0 :
- case PCIE_SERDES1 :
- trans = dd->ipath_kregs->kr_pcie_epbtrans;
- break;
- default :
- return -1;
- }
-
- /*
- * All access is locked in software (vs other host threads) and
- * hardware (vs uC access).
- */
- spin_lock_irqsave(&dd->ipath_sdepb_lock, flags);
-
- owned = epb_access(dd, sdnum, 1);
- if (owned < 0) {
- spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
- return -1;
- }
- ret = 0;
- for (tries = EPB_TRANS_TRIES; tries; --tries) {
- transval = ipath_read_kreg32(dd, trans);
- if (transval & EPB_TRANS_RDY)
- break;
- udelay(5);
- }
-
- if (tries > 0) {
- tries = 1; /* to make read-skip work */
- if (mask != 0xFF) {
- /*
- * Not a pure write, so need to read.
- * loc encodes chip-select as well as address
- */
- transval = loc | EPB_RD;
- tries = epb_trans(dd, trans, transval, &transval);
- }
- if (tries > 0 && mask != 0) {
- /*
- * Not a pure read, so need to write.
- */
- wd = (wd & mask) | (transval & ~mask);
- transval = loc | (wd & EPB_DATA_MASK);
- tries = epb_trans(dd, trans, transval, &transval);
- }
- }
- /* else, failed to see ready, what error-handling? */
-
- /*
- * Release bus. Failure is an error.
- */
- if (epb_access(dd, sdnum, -1) < 0)
- ret = -1;
- else
- ret = transval & EPB_DATA_MASK;
-
- spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
- if (tries <= 0)
- ret = -1;
- return ret;
-}
-
-#define EPB_ROM_R (2)
-#define EPB_ROM_W (1)
-/*
- * Below, all uC-related, use appropriate UC_CS, depending
- * on which SerDes is used.
- */
-#define EPB_UC_CTL EPB_LOC(6, 0, 0)
-#define EPB_MADDRL EPB_LOC(6, 0, 2)
-#define EPB_MADDRH EPB_LOC(6, 0, 3)
-#define EPB_ROMDATA EPB_LOC(6, 0, 4)
-#define EPB_RAMDATA EPB_LOC(6, 0, 5)
-
-/* Transfer date to/from uC Program RAM of IB or PCIe SerDes */
-static int ipath_sd7220_ram_xfer(struct ipath_devdata *dd, int sdnum, u32 loc,
- u8 *buf, int cnt, int rd_notwr)
-{
- u16 trans;
- u64 transval;
- u64 csbit;
- int owned;
- int tries;
- int sofar;
- int addr;
- int ret;
- unsigned long flags;
- const char *op;
-
- /* Pick appropriate transaction reg and "Chip select" for this serdes */
- switch (sdnum) {
- case IB_7220_SERDES :
- csbit = 1ULL << EPB_IB_UC_CS_SHF;
- trans = dd->ipath_kregs->kr_ib_epbtrans;
- break;
- case PCIE_SERDES0 :
- case PCIE_SERDES1 :
- /* PCIe SERDES has uC "chip select" in different bit, too */
- csbit = 1ULL << EPB_PCIE_UC_CS_SHF;
- trans = dd->ipath_kregs->kr_pcie_epbtrans;
- break;
- default :
- return -1;
- }
-
- op = rd_notwr ? "Rd" : "Wr";
- spin_lock_irqsave(&dd->ipath_sdepb_lock, flags);
-
- owned = epb_access(dd, sdnum, 1);
- if (owned < 0) {
- spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
- ipath_dbg("Could not get %s access to %s EPB: %X, loc %X\n",
- op, (sdnum == IB_7220_SERDES) ? "IB" : "PCIe",
- owned, loc);
- return -1;
- }
-
- /*
- * In future code, we may need to distinguish several address ranges,
- * and select various memories based on this. For now, just trim
- * "loc" (location including address and memory select) to
- * "addr" (address within memory). we will only support PRAM
- * The memory is 8KB.
- */
- addr = loc & 0x1FFF;
- for (tries = EPB_TRANS_TRIES; tries; --tries) {
- transval = ipath_read_kreg32(dd, trans);
- if (transval & EPB_TRANS_RDY)
- break;
- udelay(5);
- }
-
- sofar = 0;
- if (tries <= 0)
- ipath_dbg("No initial RDY on EPB access request\n");
- else {
- /*
- * Every "memory" access is doubly-indirect.
- * We set two bytes of address, then read/write
- * one or mores bytes of data.
- */
-
- /* First, we set control to "Read" or "Write" */
- transval = csbit | EPB_UC_CTL |
- (rd_notwr ? EPB_ROM_R : EPB_ROM_W);
- tries = epb_trans(dd, trans, transval, &transval);
- if (tries <= 0)
- ipath_dbg("No EPB response to uC %s cmd\n", op);
- while (tries > 0 && sofar < cnt) {
- if (!sofar) {
- /* Only set address at start of chunk */
- int addrbyte = (addr + sofar) >> 8;
- transval = csbit | EPB_MADDRH | addrbyte;
- tries = epb_trans(dd, trans, transval,
- &transval);
- if (tries <= 0) {
- ipath_dbg("No EPB response ADDRH\n");
- break;
- }
- addrbyte = (addr + sofar) & 0xFF;
- transval = csbit | EPB_MADDRL | addrbyte;
- tries = epb_trans(dd, trans, transval,
- &transval);
- if (tries <= 0) {
- ipath_dbg("No EPB response ADDRL\n");
- break;
- }
- }
-
- if (rd_notwr)
- transval = csbit | EPB_ROMDATA | EPB_RD;
- else
- transval = csbit | EPB_ROMDATA | buf[sofar];
- tries = epb_trans(dd, trans, transval, &transval);
- if (tries <= 0) {
- ipath_dbg("No EPB response DATA\n");
- break;
- }
- if (rd_notwr)
- buf[sofar] = transval & EPB_DATA_MASK;
- ++sofar;
- }
- /* Finally, clear control-bit for Read or Write */
- transval = csbit | EPB_UC_CTL;
- tries = epb_trans(dd, trans, transval, &transval);
- if (tries <= 0)
- ipath_dbg("No EPB response to drop of uC %s cmd\n", op);
- }
-
- ret = sofar;
- /* Release bus. Failure is an error */
- if (epb_access(dd, sdnum, -1) < 0)
- ret = -1;
-
- spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
- if (tries <= 0) {
- ipath_dbg("SERDES PRAM %s failed after %d bytes\n", op, sofar);
- ret = -1;
- }
- return ret;
-}
-
-#define PROG_CHUNK 64
-
-int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum,
- u8 *img, int len, int offset)
-{
- int cnt, sofar, req;
-
- sofar = 0;
- while (sofar < len) {
- req = len - sofar;
- if (req > PROG_CHUNK)
- req = PROG_CHUNK;
- cnt = ipath_sd7220_ram_xfer(dd, sdnum, offset + sofar,
- img + sofar, req, 0);
- if (cnt < req) {
- sofar = -1;
- break;
- }
- sofar += req;
- }
- return sofar;
-}
-
-#define VFY_CHUNK 64
-#define SD_PRAM_ERROR_LIMIT 42
-
-int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum,
- const u8 *img, int len, int offset)
-{
- int cnt, sofar, req, idx, errors;
- unsigned char readback[VFY_CHUNK];
-
- errors = 0;
- sofar = 0;
- while (sofar < len) {
- req = len - sofar;
- if (req > VFY_CHUNK)
- req = VFY_CHUNK;
- cnt = ipath_sd7220_ram_xfer(dd, sdnum, sofar + offset,
- readback, req, 1);
- if (cnt < req) {
- /* failed in read itself */
- sofar = -1;
- break;
- }
- for (idx = 0; idx < cnt; ++idx) {
- if (readback[idx] != img[idx+sofar])
- ++errors;
- }
- sofar += cnt;
- }
- return errors ? -errors : sofar;
-}
-
-/* IRQ not set up at this point in init, so we poll. */
-#define IB_SERDES_TRIM_DONE (1ULL << 11)
-#define TRIM_TMO (30)
-
-static int ipath_sd_trimdone_poll(struct ipath_devdata *dd)
-{
- int trim_tmo, ret;
- uint64_t val;
-
- /*
- * Default to failure, so IBC will not start
- * without IB_SERDES_TRIM_DONE.
- */
- ret = 0;
- for (trim_tmo = 0; trim_tmo < TRIM_TMO; ++trim_tmo) {
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- if (val & IB_SERDES_TRIM_DONE) {
- ipath_cdbg(VERBOSE, "TRIMDONE after %d\n", trim_tmo);
- ret = 1;
- break;
- }
- msleep(10);
- }
- if (trim_tmo >= TRIM_TMO) {
- ipath_dev_err(dd, "No TRIMDONE in %d tries\n", trim_tmo);
- ret = 0;
- }
- return ret;
-}
-
-#define TX_FAST_ELT (9)
-
-/*
- * Set the "negotiation" values for SERDES. These are used by the IB1.2
- * link negotiation. Macros below are attempt to keep the values a
- * little more human-editable.
- * First, values related to Drive De-emphasis Settings.
- */
-
-#define NUM_DDS_REGS 6
-#define DDS_REG_MAP 0x76A910 /* LSB-first list of regs (in elt 9) to mod */
-
-#define DDS_VAL(amp_d, main_d, ipst_d, ipre_d, amp_s, main_s, ipst_s, ipre_s) \
- { { ((amp_d & 0x1F) << 1) | 1, ((amp_s & 0x1F) << 1) | 1, \
- (main_d << 3) | 4 | (ipre_d >> 2), \
- (main_s << 3) | 4 | (ipre_s >> 2), \
- ((ipst_d & 0xF) << 1) | ((ipre_d & 3) << 6) | 0x21, \
- ((ipst_s & 0xF) << 1) | ((ipre_s & 3) << 6) | 0x21 } }
-
-static struct dds_init {
- uint8_t reg_vals[NUM_DDS_REGS];
-} dds_init_vals[] = {
- /* DDR(FDR) SDR(HDR) */
- /* Vendor recommends below for 3m cable */
-#define DDS_3M 0
- DDS_VAL(31, 19, 12, 0, 29, 22, 9, 0),
- DDS_VAL(31, 12, 15, 4, 31, 15, 15, 1),
- DDS_VAL(31, 13, 15, 3, 31, 16, 15, 0),
- DDS_VAL(31, 14, 15, 2, 31, 17, 14, 0),
- DDS_VAL(31, 15, 15, 1, 31, 18, 13, 0),
- DDS_VAL(31, 16, 15, 0, 31, 19, 12, 0),
- DDS_VAL(31, 17, 14, 0, 31, 20, 11, 0),
- DDS_VAL(31, 18, 13, 0, 30, 21, 10, 0),
- DDS_VAL(31, 20, 11, 0, 28, 23, 8, 0),
- DDS_VAL(31, 21, 10, 0, 27, 24, 7, 0),
- DDS_VAL(31, 22, 9, 0, 26, 25, 6, 0),
- DDS_VAL(30, 23, 8, 0, 25, 26, 5, 0),
- DDS_VAL(29, 24, 7, 0, 23, 27, 4, 0),
- /* Vendor recommends below for 1m cable */
-#define DDS_1M 13
- DDS_VAL(28, 25, 6, 0, 21, 28, 3, 0),
- DDS_VAL(27, 26, 5, 0, 19, 29, 2, 0),
- DDS_VAL(25, 27, 4, 0, 17, 30, 1, 0)
-};
-
-/*
- * Next, values related to Receive Equalization.
- * In comments, FDR (Full) is IB DDR, HDR (Half) is IB SDR
- */
-/* Hardware packs an element number and register address thus: */
-#define RXEQ_INIT_RDESC(elt, addr) (((elt) & 0xF) | ((addr) << 4))
-#define RXEQ_VAL(elt, adr, val0, val1, val2, val3) \
- {RXEQ_INIT_RDESC((elt), (adr)), {(val0), (val1), (val2), (val3)} }
-
-#define RXEQ_VAL_ALL(elt, adr, val) \
- {RXEQ_INIT_RDESC((elt), (adr)), {(val), (val), (val), (val)} }
-
-#define RXEQ_SDR_DFELTH 0
-#define RXEQ_SDR_TLTH 0
-#define RXEQ_SDR_G1CNT_Z1CNT 0x11
-#define RXEQ_SDR_ZCNT 23
-
-static struct rxeq_init {
- u16 rdesc; /* in form used in SerDesDDSRXEQ */
- u8 rdata[4];
-} rxeq_init_vals[] = {
- /* Set Rcv Eq. to Preset node */
- RXEQ_VAL_ALL(7, 0x27, 0x10),
- /* Set DFELTHFDR/HDR thresholds */
- RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */
- RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */
- /* Set TLTHFDR/HDR threshold */
- RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */
- RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */
- /* Set Preamp setting 2 (ZFR/ZCNT) */
- RXEQ_VAL(7, 0x1B, 12, 12, 12, 12), /* FDR */
- RXEQ_VAL(7, 0x1C, 12, 12, 12, 12), /* HDR */
- /* Set Preamp DC gain and Setting 1 (GFR/GHR) */
- RXEQ_VAL(7, 0x1E, 0x10, 0x10, 0x10, 0x10), /* FDR */
- RXEQ_VAL(7, 0x1F, 0x10, 0x10, 0x10, 0x10), /* HDR */
- /* Toggle RELOCK (in VCDL_CTRL0) to lock to data */
- RXEQ_VAL_ALL(6, 6, 0x20), /* Set D5 High */
- RXEQ_VAL_ALL(6, 6, 0), /* Set D5 Low */
-};
-
-/* There are 17 values from vendor, but IBC only accesses the first 16 */
-#define DDS_ROWS (16)
-#define RXEQ_ROWS ARRAY_SIZE(rxeq_init_vals)
-
-static int ipath_sd_setvals(struct ipath_devdata *dd)
-{
- int idx, midx;
- int min_idx; /* Minimum index for this portion of table */
- uint32_t dds_reg_map;
- u64 __iomem *taddr, *iaddr;
- uint64_t data;
- uint64_t sdctl;
-
- taddr = dd->ipath_kregbase + KR_IBSerDesMappTable;
- iaddr = dd->ipath_kregbase + dd->ipath_kregs->kr_ib_ddsrxeq;
-
- /*
- * Init the DDS section of the table.
- * Each "row" of the table provokes NUM_DDS_REG writes, to the
- * registers indicated in DDS_REG_MAP.
- */
- sdctl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl);
- sdctl = (sdctl & ~(0x1f << 8)) | (NUM_DDS_REGS << 8);
- sdctl = (sdctl & ~(0x1f << 13)) | (RXEQ_ROWS << 13);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, sdctl);
-
- /*
- * Iterate down table within loop for each register to store.
- */
- dds_reg_map = DDS_REG_MAP;
- for (idx = 0; idx < NUM_DDS_REGS; ++idx) {
- data = ((dds_reg_map & 0xF) << 4) | TX_FAST_ELT;
- writeq(data, iaddr + idx);
- mmiowb();
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- dds_reg_map >>= 4;
- for (midx = 0; midx < DDS_ROWS; ++midx) {
- u64 __iomem *daddr = taddr + ((midx << 4) + idx);
- data = dds_init_vals[midx].reg_vals[idx];
- writeq(data, daddr);
- mmiowb();
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- } /* End inner for (vals for this reg, each row) */
- } /* end outer for (regs to be stored) */
-
- /*
- * Init the RXEQ section of the table. As explained above the table
- * rxeq_init_vals[], this runs in a different order, as the pattern
- * of register references is more complex, but there are only
- * four "data" values per register.
- */
- min_idx = idx; /* RXEQ indices pick up where DDS left off */
- taddr += 0x100; /* RXEQ data is in second half of table */
- /* Iterate through RXEQ register addresses */
- for (idx = 0; idx < RXEQ_ROWS; ++idx) {
- int didx; /* "destination" */
- int vidx;
-
- /* didx is offset by min_idx to address RXEQ range of regs */
- didx = idx + min_idx;
- /* Store the next RXEQ register address */
- writeq(rxeq_init_vals[idx].rdesc, iaddr + didx);
- mmiowb();
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- /* Iterate through RXEQ values */
- for (vidx = 0; vidx < 4; vidx++) {
- data = rxeq_init_vals[idx].rdata[vidx];
- writeq(data, taddr + (vidx << 6) + idx);
- mmiowb();
- ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
- }
- } /* end outer for (Reg-writes for RXEQ) */
- return 0;
-}
-
-#define CMUCTRL5 EPB_LOC(7, 0, 0x15)
-#define RXHSCTRL0(chan) EPB_LOC(chan, 6, 0)
-#define VCDL_DAC2(chan) EPB_LOC(chan, 6, 5)
-#define VCDL_CTRL0(chan) EPB_LOC(chan, 6, 6)
-#define VCDL_CTRL2(chan) EPB_LOC(chan, 6, 8)
-#define START_EQ2(chan) EPB_LOC(chan, 7, 0x28)
-
-static int ibsd_sto_noisy(struct ipath_devdata *dd, int loc, int val, int mask)
-{
- int ret = -1;
- int sloc; /* shifted loc, for messages */
-
- loc |= (1U << EPB_IB_QUAD0_CS_SHF);
- sloc = loc >> EPB_ADDR_SHF;
-
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, mask);
- if (ret < 0)
- ipath_dev_err(dd, "Write failed: elt %d,"
- " addr 0x%X, chnl %d, val 0x%02X, mask 0x%02X\n",
- (sloc & 0xF), (sloc >> 9) & 0x3f, (sloc >> 4) & 7,
- val & 0xFF, mask & 0xFF);
- return ret;
-}
-
-/*
- * Repeat a "store" across all channels of the IB SerDes.
- * Although nominally it inherits the "read value" of the last
- * channel it modified, the only really useful return is <0 for
- * failure, >= 0 for success. The parameter 'loc' is assumed to
- * be the location for the channel-0 copy of the register to
- * be modified.
- */
-static int ibsd_mod_allchnls(struct ipath_devdata *dd, int loc, int val,
- int mask)
-{
- int ret = -1;
- int chnl;
-
- if (loc & EPB_GLOBAL_WR) {
- /*
- * Our caller has assured us that we can set all four
- * channels at once. Trust that. If mask is not 0xFF,
- * we will read the _specified_ channel for our starting
- * value.
- */
- loc |= (1U << EPB_IB_QUAD0_CS_SHF);
- chnl = (loc >> (4 + EPB_ADDR_SHF)) & 7;
- if (mask != 0xFF) {
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
- loc & ~EPB_GLOBAL_WR, 0, 0);
- if (ret < 0) {
- int sloc = loc >> EPB_ADDR_SHF;
- ipath_dev_err(dd, "pre-read failed: elt %d,"
- " addr 0x%X, chnl %d\n", (sloc & 0xF),
- (sloc >> 9) & 0x3f, chnl);
- return ret;
- }
- val = (ret & ~mask) | (val & mask);
- }
- loc &= ~(7 << (4+EPB_ADDR_SHF));
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, 0xFF);
- if (ret < 0) {
- int sloc = loc >> EPB_ADDR_SHF;
- ipath_dev_err(dd, "Global WR failed: elt %d,"
- " addr 0x%X, val %02X\n",
- (sloc & 0xF), (sloc >> 9) & 0x3f, val);
- }
- return ret;
- }
- /* Clear "channel" and set CS so we can simply iterate */
- loc &= ~(7 << (4+EPB_ADDR_SHF));
- loc |= (1U << EPB_IB_QUAD0_CS_SHF);
- for (chnl = 0; chnl < 4; ++chnl) {
- int cloc;
- cloc = loc | (chnl << (4+EPB_ADDR_SHF));
- ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, cloc, val, mask);
- if (ret < 0) {
- int sloc = loc >> EPB_ADDR_SHF;
- ipath_dev_err(dd, "Write failed: elt %d,"
- " addr 0x%X, chnl %d, val 0x%02X,"
- " mask 0x%02X\n",
- (sloc & 0xF), (sloc >> 9) & 0x3f, chnl,
- val & 0xFF, mask & 0xFF);
- break;
- }
- }
- return ret;
-}
-
-/*
- * Set the Tx values normally modified by IBC in IB1.2 mode to default
- * values, as gotten from first row of init table.
- */
-static int set_dds_vals(struct ipath_devdata *dd, struct dds_init *ddi)
-{
- int ret;
- int idx, reg, data;
- uint32_t regmap;
-
- regmap = DDS_REG_MAP;
- for (idx = 0; idx < NUM_DDS_REGS; ++idx) {
- reg = (regmap & 0xF);
- regmap >>= 4;
- data = ddi->reg_vals[idx];
- /* Vendor says RMW not needed for these regs, use 0xFF mask */
- ret = ibsd_mod_allchnls(dd, EPB_LOC(0, 9, reg), data, 0xFF);
- if (ret < 0)
- break;
- }
- return ret;
-}
-
-/*
- * Set the Rx values normally modified by IBC in IB1.2 mode to default
- * values, as gotten from selected column of init table.
- */
-static int set_rxeq_vals(struct ipath_devdata *dd, int vsel)
-{
- int ret;
- int ridx;
- int cnt = ARRAY_SIZE(rxeq_init_vals);
-
- for (ridx = 0; ridx < cnt; ++ridx) {
- int elt, reg, val, loc;
- elt = rxeq_init_vals[ridx].rdesc & 0xF;
- reg = rxeq_init_vals[ridx].rdesc >> 4;
- loc = EPB_LOC(0, elt, reg);
- val = rxeq_init_vals[ridx].rdata[vsel];
- /* mask of 0xFF, because hardware does full-byte store. */
- ret = ibsd_mod_allchnls(dd, loc, val, 0xFF);
- if (ret < 0)
- break;
- }
- return ret;
-}
-
-/*
- * Set the default values (row 0) for DDR Driver Demphasis.
- * we do this initially and whenever we turn off IB-1.2
- * The "default" values for Rx equalization are also stored to
- * SerDes registers. Formerly (and still default), we used set 2.
- * For experimenting with cables and link-partners, we allow changing
- * that via a module parameter.
- */
-static unsigned ipath_rxeq_set = 2;
-module_param_named(rxeq_default_set, ipath_rxeq_set, uint,
- S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(rxeq_default_set,
- "Which set [0..3] of Rx Equalization values is default");
-
-static int ipath_internal_presets(struct ipath_devdata *dd)
-{
- int ret = 0;
-
- ret = set_dds_vals(dd, dds_init_vals + DDS_3M);
-
- if (ret < 0)
- ipath_dev_err(dd, "Failed to set default DDS values\n");
- ret = set_rxeq_vals(dd, ipath_rxeq_set & 3);
- if (ret < 0)
- ipath_dev_err(dd, "Failed to set default RXEQ values\n");
- return ret;
-}
-
-int ipath_sd7220_presets(struct ipath_devdata *dd)
-{
- int ret = 0;
-
- if (!dd->ipath_presets_needed)
- return ret;
- dd->ipath_presets_needed = 0;
- /* Assert uC reset, so we don't clash with it. */
- ipath_ibsd_reset(dd, 1);
- udelay(2);
- ipath_sd_trimdone_monitor(dd, "link-down");
-
- ret = ipath_internal_presets(dd);
-return ret;
-}
-
-static int ipath_sd_trimself(struct ipath_devdata *dd, int val)
-{
- return ibsd_sto_noisy(dd, CMUCTRL5, val, 0xFF);
-}
-
-static int ipath_sd_early(struct ipath_devdata *dd)
-{
- int ret = -1; /* Default failed */
- int chnl;
-
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, RXHSCTRL0(chnl), 0xD4, 0xFF);
- if (ret < 0)
- goto bail;
- }
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, VCDL_DAC2(chnl), 0x2D, 0xFF);
- if (ret < 0)
- goto bail;
- }
- /* more fine-tuning of what will be default */
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, VCDL_CTRL2(chnl), 3, 0xF);
- if (ret < 0)
- goto bail;
- }
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, START_EQ1(chnl), 0x10, 0xFF);
- if (ret < 0)
- goto bail;
- }
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, START_EQ2(chnl), 0x30, 0xFF);
- if (ret < 0)
- goto bail;
- }
-bail:
- return ret;
-}
-
-#define BACTRL(chnl) EPB_LOC(chnl, 6, 0x0E)
-#define LDOUTCTRL1(chnl) EPB_LOC(chnl, 7, 6)
-#define RXHSSTATUS(chnl) EPB_LOC(chnl, 6, 0xF)
-
-static int ipath_sd_dactrim(struct ipath_devdata *dd)
-{
- int ret = -1; /* Default failed */
- int chnl;
-
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, BACTRL(chnl), 0x40, 0xFF);
- if (ret < 0)
- goto bail;
- }
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, LDOUTCTRL1(chnl), 0x04, 0xFF);
- if (ret < 0)
- goto bail;
- }
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, RXHSSTATUS(chnl), 0x04, 0xFF);
- if (ret < 0)
- goto bail;
- }
- /*
- * delay for max possible number of steps, with slop.
- * Each step is about 4usec.
- */
- udelay(415);
- for (chnl = 0; chnl < 4; ++chnl) {
- ret = ibsd_sto_noisy(dd, LDOUTCTRL1(chnl), 0x00, 0xFF);
- if (ret < 0)
- goto bail;
- }
-bail:
- return ret;
-}
-
-#define RELOCK_FIRST_MS 3
-#define RXLSPPM(chan) EPB_LOC(chan, 0, 2)
-void ipath_toggle_rclkrls(struct ipath_devdata *dd)
-{
- int loc = RXLSPPM(0) | EPB_GLOBAL_WR;
- int ret;
-
- ret = ibsd_mod_allchnls(dd, loc, 0, 0x80);
- if (ret < 0)
- ipath_dev_err(dd, "RCLKRLS failed to clear D7\n");
- else {
- udelay(1);
- ibsd_mod_allchnls(dd, loc, 0x80, 0x80);
- }
- /* And again for good measure */
- udelay(1);
- ret = ibsd_mod_allchnls(dd, loc, 0, 0x80);
- if (ret < 0)
- ipath_dev_err(dd, "RCLKRLS failed to clear D7\n");
- else {
- udelay(1);
- ibsd_mod_allchnls(dd, loc, 0x80, 0x80);
- }
- /* Now reset xgxs and IBC to complete the recovery */
- dd->ipath_f_xgxs_reset(dd);
-}
-
-/*
- * Shut down the timer that polls for relock occasions, if needed
- * this is "hooked" from ipath_7220_quiet_serdes(), which is called
- * just before ipath_shutdown_device() in ipath_driver.c shuts down all
- * the other timers
- */
-void ipath_shutdown_relock_poll(struct ipath_devdata *dd)
-{
- struct ipath_relock *irp = &dd->ipath_relock_singleton;
- if (atomic_read(&irp->ipath_relock_timer_active)) {
- del_timer_sync(&irp->ipath_relock_timer);
- atomic_set(&irp->ipath_relock_timer_active, 0);
- }
-}
-
-static unsigned ipath_relock_by_timer = 1;
-module_param_named(relock_by_timer, ipath_relock_by_timer, uint,
- S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(relock_by_timer, "Allow relock attempt if link not up");
-
-static void ipath_run_relock(unsigned long opaque)
-{
- struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
- struct ipath_relock *irp = &dd->ipath_relock_singleton;
- u64 val, ltstate;
-
- if (!(dd->ipath_flags & IPATH_INITTED)) {
- /* Not yet up, just reenable the timer for later */
- irp->ipath_relock_interval = HZ;
- mod_timer(&irp->ipath_relock_timer, jiffies + HZ);
- return;
- }
-
- /*
- * Check link-training state for "stuck" state.
- * if found, try relock and schedule another try at
- * exponentially growing delay, maxed at one second.
- * if not stuck, our work is done.
- */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- ltstate = ipath_ib_linktrstate(dd, val);
-
- if (ltstate <= INFINIPATH_IBCS_LT_STATE_CFGWAITRMT
- && ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
- int timeoff;
- /* Not up yet. Try again, if allowed by module-param */
- if (ipath_relock_by_timer) {
- if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)
- ipath_cdbg(VERBOSE, "Skip RELOCK in AUTONEG\n");
- else if (!(dd->ipath_flags & IPATH_IB_LINK_DISABLED)) {
- ipath_cdbg(VERBOSE, "RELOCK\n");
- ipath_toggle_rclkrls(dd);
- }
- }
- /* re-set timer for next check */
- timeoff = irp->ipath_relock_interval << 1;
- if (timeoff > HZ)
- timeoff = HZ;
- irp->ipath_relock_interval = timeoff;
-
- mod_timer(&irp->ipath_relock_timer, jiffies + timeoff);
- } else {
- /* Up, so no more need to check so often */
- mod_timer(&irp->ipath_relock_timer, jiffies + HZ);
- }
-}
-
-void ipath_set_relock_poll(struct ipath_devdata *dd, int ibup)
-{
- struct ipath_relock *irp = &dd->ipath_relock_singleton;
-
- if (ibup > 0) {
- /* we are now up, so relax timer to 1 second interval */
- if (atomic_read(&irp->ipath_relock_timer_active))
- mod_timer(&irp->ipath_relock_timer, jiffies + HZ);
- } else {
- /* Transition to down, (re-)set timer to short interval. */
- int timeout;
- timeout = (HZ * ((ibup == -1) ? 1000 : RELOCK_FIRST_MS))/1000;
- if (timeout == 0)
- timeout = 1;
- /* If timer has not yet been started, do so. */
- if (atomic_inc_return(&irp->ipath_relock_timer_active) == 1) {
- init_timer(&irp->ipath_relock_timer);
- irp->ipath_relock_timer.function = ipath_run_relock;
- irp->ipath_relock_timer.data = (unsigned long) dd;
- irp->ipath_relock_interval = timeout;
- irp->ipath_relock_timer.expires = jiffies + timeout;
- add_timer(&irp->ipath_relock_timer);
- } else {
- irp->ipath_relock_interval = timeout;
- mod_timer(&irp->ipath_relock_timer, jiffies + timeout);
- atomic_dec(&irp->ipath_relock_timer_active);
- }
- }
-}
-
+++ /dev/null
-/*
- * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses. You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the
- * OpenIB.org BSD license below:
- *
- * Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * - Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- *
- * - Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * This file contains the memory image from the vendor, to be copied into
- * the IB SERDES of the IBA7220 during initialization.
- * The file also includes the two functions which use this image.
- */
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "ipath_kernel.h"
-#include "ipath_registers.h"
-#include "ipath_7220.h"
-
-static unsigned char ipath_sd7220_ib_img[] = {
-/*0000*/0x02, 0x0A, 0x29, 0x02, 0x0A, 0x87, 0xE5, 0xE6,
- 0x30, 0xE6, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
-/*0010*/0x00, 0xE5, 0xE2, 0x30, 0xE4, 0x04, 0x7E, 0x01,
- 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x08,
-/*0020*/0x53, 0xF9, 0xF7, 0xE4, 0xF5, 0xFE, 0x80, 0x08,
- 0x7F, 0x0A, 0x12, 0x17, 0x31, 0x12, 0x0E, 0xA2,
-/*0030*/0x75, 0xFC, 0x08, 0xE4, 0xF5, 0xFD, 0xE5, 0xE7,
- 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0x22, 0x00,
-/*0040*/0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x75,
- 0x51, 0x01, 0xE4, 0xF5, 0x52, 0xF5, 0x53, 0xF5,
-/*0050*/0x52, 0xF5, 0x7E, 0x7F, 0x04, 0x02, 0x04, 0x38,
- 0xC2, 0x36, 0x05, 0x52, 0xE5, 0x52, 0xD3, 0x94,
-/*0060*/0x0C, 0x40, 0x05, 0x75, 0x52, 0x01, 0xD2, 0x36,
- 0x90, 0x07, 0x0C, 0x74, 0x07, 0xF0, 0xA3, 0x74,
-/*0070*/0xFF, 0xF0, 0xE4, 0xF5, 0x0C, 0xA3, 0xF0, 0x90,
- 0x07, 0x14, 0xF0, 0xA3, 0xF0, 0x75, 0x0B, 0x20,
-/*0080*/0xF5, 0x09, 0xE4, 0xF5, 0x08, 0xE5, 0x08, 0xD3,
- 0x94, 0x30, 0x40, 0x03, 0x02, 0x04, 0x04, 0x12,
-/*0090*/0x00, 0x06, 0x15, 0x0B, 0xE5, 0x08, 0x70, 0x04,
- 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x09,
-/*00A0*/0x70, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00,
- 0xEE, 0x5F, 0x60, 0x05, 0x12, 0x18, 0x71, 0xD2,
-/*00B0*/0x35, 0x53, 0xE1, 0xF7, 0xE5, 0x08, 0x45, 0x09,
- 0xFF, 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*00C0*/0x83, 0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83,
- 0xEF, 0xF0, 0x85, 0xE2, 0x20, 0xE5, 0x52, 0xD3,
-/*00D0*/0x94, 0x01, 0x40, 0x0D, 0x12, 0x19, 0xF3, 0xE0,
- 0x54, 0xA0, 0x64, 0x40, 0x70, 0x03, 0x02, 0x03,
-/*00E0*/0xFB, 0x53, 0xF9, 0xF8, 0x90, 0x94, 0x70, 0xE4,
- 0xF0, 0xE0, 0xF5, 0x10, 0xAF, 0x09, 0x12, 0x1E,
-/*00F0*/0xB3, 0xAF, 0x08, 0xEF, 0x44, 0x08, 0xF5, 0x82,
- 0x75, 0x83, 0x80, 0xE0, 0xF5, 0x29, 0xEF, 0x44,
-/*0100*/0x07, 0x12, 0x1A, 0x3C, 0xF5, 0x22, 0x54, 0x40,
- 0xD3, 0x94, 0x00, 0x40, 0x1E, 0xE5, 0x29, 0x54,
-/*0110*/0xF0, 0x70, 0x21, 0x12, 0x19, 0xF3, 0xE0, 0x44,
- 0x80, 0xF0, 0xE5, 0x22, 0x54, 0x30, 0x65, 0x08,
-/*0120*/0x70, 0x09, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xBF,
- 0xF0, 0x80, 0x09, 0x12, 0x19, 0xF3, 0x74, 0x40,
-/*0130*/0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12, 0x75,
- 0x83, 0xAE, 0x74, 0xFF, 0xF0, 0xAF, 0x08, 0x7E,
-/*0140*/0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0xE0, 0xFD,
- 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24, 0x81,
-/*0150*/0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83, 0xED,
- 0xF0, 0x90, 0x07, 0x0E, 0xE0, 0x04, 0xF0, 0xEF,
-/*0160*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0x98, 0xE0,
- 0xF5, 0x28, 0x12, 0x1A, 0x23, 0x40, 0x0C, 0x12,
-/*0170*/0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12, 0x1A, 0x32,
- 0x02, 0x03, 0xF6, 0xAF, 0x08, 0x7E, 0x00, 0x74,
-/*0180*/0x80, 0xCD, 0xEF, 0xCD, 0x8D, 0x82, 0xF5, 0x83,
- 0xE0, 0x30, 0xE0, 0x0A, 0x12, 0x19, 0xF3, 0xE0,
-/*0190*/0x44, 0x20, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x19,
- 0xF3, 0xE0, 0x54, 0xDF, 0xF0, 0xEE, 0x44, 0xAE,
-/*01A0*/0x12, 0x1A, 0x43, 0x30, 0xE4, 0x03, 0x02, 0x03,
- 0xFB, 0x74, 0x9E, 0x12, 0x1A, 0x05, 0x20, 0xE0,
-/*01B0*/0x03, 0x02, 0x03, 0xFB, 0x8F, 0x82, 0x8E, 0x83,
- 0xE0, 0x20, 0xE0, 0x03, 0x02, 0x03, 0xFB, 0x12,
-/*01C0*/0x19, 0xF3, 0xE0, 0x44, 0x10, 0xF0, 0xE5, 0xE3,
- 0x20, 0xE7, 0x08, 0xE5, 0x08, 0x12, 0x1A, 0x3A,
-/*01D0*/0x44, 0x04, 0xF0, 0xAF, 0x08, 0x7E, 0x00, 0xEF,
- 0x12, 0x1A, 0x3A, 0x20, 0xE2, 0x34, 0x12, 0x19,
-/*01E0*/0xF3, 0xE0, 0x44, 0x08, 0xF0, 0xE5, 0xE4, 0x30,
- 0xE6, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*01F0*/0xE5, 0x7E, 0xC3, 0x94, 0x04, 0x50, 0x04, 0x7C,
- 0x01, 0x80, 0x02, 0x7C, 0x00, 0xEC, 0x4D, 0x60,
-/*0200*/0x05, 0xC2, 0x35, 0x02, 0x03, 0xFB, 0xEE, 0x44,
- 0xD2, 0x12, 0x1A, 0x43, 0x44, 0x40, 0xF0, 0x02,
-/*0210*/0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xF7,
- 0xF0, 0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0,
-/*0220*/0x54, 0xBF, 0xF0, 0x90, 0x07, 0x14, 0xE0, 0x04,
- 0xF0, 0xE5, 0x7E, 0x70, 0x03, 0x75, 0x7E, 0x01,
-/*0230*/0xAF, 0x08, 0x7E, 0x00, 0x12, 0x1A, 0x23, 0x40,
- 0x12, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12,
-/*0240*/0x19, 0xF2, 0xE0, 0x54, 0x02, 0x12, 0x1A, 0x32,
- 0x02, 0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x44,
-/*0250*/0x02, 0x12, 0x19, 0xF2, 0xE0, 0x54, 0xFE, 0xF0,
- 0xC2, 0x35, 0xEE, 0x44, 0x8A, 0x8F, 0x82, 0xF5,
-/*0260*/0x83, 0xE0, 0xF5, 0x17, 0x54, 0x8F, 0x44, 0x40,
- 0xF0, 0x74, 0x90, 0xFC, 0xE5, 0x08, 0x44, 0x07,
-/*0270*/0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0x54, 0x3F,
- 0x90, 0x07, 0x02, 0xF0, 0xE0, 0x54, 0xC0, 0x8D,
-/*0280*/0x82, 0x8C, 0x83, 0xF0, 0x74, 0x92, 0x12, 0x1A,
- 0x05, 0x90, 0x07, 0x03, 0x12, 0x1A, 0x19, 0x74,
-/*0290*/0x82, 0x12, 0x1A, 0x05, 0x90, 0x07, 0x04, 0x12,
- 0x1A, 0x19, 0x74, 0xB4, 0x12, 0x1A, 0x05, 0x90,
-/*02A0*/0x07, 0x05, 0x12, 0x1A, 0x19, 0x74, 0x94, 0xFE,
- 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A, 0xF5,
-/*02B0*/0x10, 0x30, 0xE0, 0x04, 0xD2, 0x37, 0x80, 0x02,
- 0xC2, 0x37, 0xE5, 0x10, 0x54, 0x7F, 0x8F, 0x82,
-/*02C0*/0x8E, 0x83, 0xF0, 0x30, 0x44, 0x30, 0x12, 0x1A,
- 0x03, 0x54, 0x80, 0xD3, 0x94, 0x00, 0x40, 0x04,
-/*02D0*/0xD2, 0x39, 0x80, 0x02, 0xC2, 0x39, 0x8F, 0x82,
- 0x8E, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x12, 0x1A,
-/*02E0*/0x03, 0x54, 0x40, 0xD3, 0x94, 0x00, 0x40, 0x04,
- 0xD2, 0x3A, 0x80, 0x02, 0xC2, 0x3A, 0x8F, 0x82,
-/*02F0*/0x8E, 0x83, 0xE0, 0x44, 0x40, 0xF0, 0x74, 0x92,
- 0xFE, 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A,
-/*0300*/0x30, 0xE7, 0x04, 0xD2, 0x38, 0x80, 0x02, 0xC2,
- 0x38, 0x8F, 0x82, 0x8E, 0x83, 0xE0, 0x54, 0x7F,
-/*0310*/0xF0, 0x12, 0x1E, 0x46, 0xE4, 0xF5, 0x0A, 0x20,
- 0x03, 0x02, 0x80, 0x03, 0x30, 0x43, 0x03, 0x12,
-/*0320*/0x19, 0x95, 0x20, 0x02, 0x02, 0x80, 0x03, 0x30,
- 0x42, 0x03, 0x12, 0x0C, 0x8F, 0x30, 0x30, 0x06,
-/*0330*/0x12, 0x19, 0x95, 0x12, 0x0C, 0x8F, 0x12, 0x0D,
- 0x47, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xFB, 0xF0,
-/*0340*/0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, 0x46, 0x43,
- 0xE1, 0x08, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x04,
-/*0350*/0xF0, 0xE5, 0xE4, 0x20, 0xE7, 0x2A, 0x12, 0x1A,
- 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0360*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
- 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0370*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
- 0x5E, 0x60, 0x05, 0x12, 0x1D, 0xD7, 0x80, 0x17,
-/*0380*/0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x44,
- 0x08, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12,
-/*0390*/0x75, 0x83, 0xD2, 0xE0, 0x54, 0xF7, 0xF0, 0x12,
- 0x1E, 0x46, 0x7F, 0x08, 0x12, 0x17, 0x31, 0x74,
-/*03A0*/0x8E, 0xFE, 0x12, 0x1A, 0x12, 0x8E, 0x83, 0xE0,
- 0xF5, 0x10, 0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44,
-/*03B0*/0x01, 0xFF, 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07,
- 0xF5, 0x82, 0xEF, 0xF0, 0xE5, 0x10, 0x54, 0xFE,
-/*03C0*/0xFF, 0xED, 0x44, 0x07, 0xF5, 0x82, 0xEF, 0x12,
- 0x1A, 0x11, 0x75, 0x83, 0x86, 0xE0, 0x44, 0x10,
-/*03D0*/0x12, 0x1A, 0x11, 0xE0, 0x44, 0x10, 0xF0, 0x12,
- 0x19, 0xF3, 0xE0, 0x54, 0xFD, 0x44, 0x01, 0xFF,
-/*03E0*/0x12, 0x19, 0xF3, 0xEF, 0x12, 0x1A, 0x32, 0x30,
- 0x32, 0x0C, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*03F0*/0x75, 0x83, 0x82, 0x74, 0x05, 0xF0, 0xAF, 0x0B,
- 0x12, 0x18, 0xD7, 0x74, 0x10, 0x25, 0x08, 0xF5,
-/*0400*/0x08, 0x02, 0x00, 0x85, 0x05, 0x09, 0xE5, 0x09,
- 0xD3, 0x94, 0x07, 0x50, 0x03, 0x02, 0x00, 0x82,
-/*0410*/0xE5, 0x7E, 0xD3, 0x94, 0x00, 0x40, 0x04, 0x7F,
- 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x7E, 0xC3,
-/*0420*/0x94, 0xFA, 0x50, 0x04, 0x7E, 0x01, 0x80, 0x02,
- 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x02, 0x05, 0x7E,
-/*0430*/0x30, 0x35, 0x0B, 0x43, 0xE1, 0x01, 0x7F, 0x09,
- 0x12, 0x17, 0x31, 0x02, 0x00, 0x58, 0x53, 0xE1,
-/*0440*/0xFE, 0x02, 0x00, 0x58, 0x8E, 0x6A, 0x8F, 0x6B,
- 0x8C, 0x6C, 0x8D, 0x6D, 0x75, 0x6E, 0x01, 0x75,
-/*0450*/0x6F, 0x01, 0x75, 0x70, 0x01, 0xE4, 0xF5, 0x73,
- 0xF5, 0x74, 0xF5, 0x75, 0x90, 0x07, 0x2F, 0xF0,
-/*0460*/0xF5, 0x3C, 0xF5, 0x3E, 0xF5, 0x46, 0xF5, 0x47,
- 0xF5, 0x3D, 0xF5, 0x3F, 0xF5, 0x6F, 0xE5, 0x6F,
-/*0470*/0x70, 0x0F, 0xE5, 0x6B, 0x45, 0x6A, 0x12, 0x07,
- 0x2A, 0x75, 0x83, 0x80, 0x74, 0x3A, 0xF0, 0x80,
-/*0480*/0x09, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74,
- 0x1A, 0xF0, 0xE4, 0xF5, 0x6E, 0xC3, 0x74, 0x3F,
-/*0490*/0x95, 0x6E, 0xFF, 0x12, 0x08, 0x65, 0x75, 0x83,
- 0x82, 0xEF, 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x08,
-/*04A0*/0xC6, 0xE5, 0x33, 0xF0, 0x12, 0x08, 0xFA, 0x12,
- 0x08, 0xB1, 0x40, 0xE1, 0xE5, 0x6F, 0x70, 0x0B,
-/*04B0*/0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74, 0x36,
- 0xF0, 0x80, 0x09, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*04C0*/0x80, 0x74, 0x16, 0xF0, 0x75, 0x6E, 0x01, 0x12,
- 0x07, 0x2A, 0x75, 0x83, 0xB4, 0xE5, 0x6E, 0xF0,
-/*04D0*/0x12, 0x1A, 0x4D, 0x74, 0x3F, 0x25, 0x6E, 0xF5,
- 0x82, 0xE4, 0x34, 0x00, 0xF5, 0x83, 0xE5, 0x33,
-/*04E0*/0xF0, 0x74, 0xBF, 0x25, 0x6E, 0xF5, 0x82, 0xE4,
- 0x34, 0x00, 0x12, 0x08, 0xB1, 0x40, 0xD8, 0xE4,
-/*04F0*/0xF5, 0x70, 0xF5, 0x46, 0xF5, 0x47, 0xF5, 0x6E,
- 0x12, 0x08, 0xFA, 0xF5, 0x83, 0xE0, 0xFE, 0x12,
-/*0500*/0x08, 0xC6, 0xE0, 0x7C, 0x00, 0x24, 0x00, 0xFF,
- 0xEC, 0x3E, 0xFE, 0xAD, 0x3B, 0xD3, 0xEF, 0x9D,
-/*0510*/0xEE, 0x9C, 0x50, 0x04, 0x7B, 0x01, 0x80, 0x02,
- 0x7B, 0x00, 0xE5, 0x70, 0x70, 0x04, 0x7A, 0x01,
-/*0520*/0x80, 0x02, 0x7A, 0x00, 0xEB, 0x5A, 0x60, 0x06,
- 0x85, 0x6E, 0x46, 0x75, 0x70, 0x01, 0xD3, 0xEF,
-/*0530*/0x9D, 0xEE, 0x9C, 0x50, 0x04, 0x7F, 0x01, 0x80,
- 0x02, 0x7F, 0x00, 0xE5, 0x70, 0xB4, 0x01, 0x04,
-/*0540*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, 0x5E,
- 0x60, 0x03, 0x85, 0x6E, 0x47, 0x05, 0x6E, 0xE5,
-/*0550*/0x6E, 0x64, 0x7F, 0x70, 0xA3, 0xE5, 0x46, 0x60,
- 0x05, 0xE5, 0x47, 0xB4, 0x7E, 0x03, 0x85, 0x46,
-/*0560*/0x47, 0xE5, 0x6F, 0x70, 0x08, 0x85, 0x46, 0x76,
- 0x85, 0x47, 0x77, 0x80, 0x0E, 0xC3, 0x74, 0x7F,
-/*0570*/0x95, 0x46, 0xF5, 0x78, 0xC3, 0x74, 0x7F, 0x95,
- 0x47, 0xF5, 0x79, 0xE5, 0x6F, 0x70, 0x37, 0xE5,
-/*0580*/0x46, 0x65, 0x47, 0x70, 0x0C, 0x75, 0x73, 0x01,
- 0x75, 0x74, 0x01, 0xF5, 0x3C, 0xF5, 0x3D, 0x80,
-/*0590*/0x35, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5, 0x47, 0x95,
- 0x46, 0xF5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
-/*05A0*/0x46, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
- 0xE4, 0xF5, 0x3D, 0x80, 0x40, 0xC3, 0x74, 0x3F,
-/*05B0*/0x95, 0x72, 0xF5, 0x3D, 0x80, 0x37, 0xE5, 0x46,
- 0x65, 0x47, 0x70, 0x0F, 0x75, 0x73, 0x01, 0x75,
-/*05C0*/0x75, 0x01, 0xF5, 0x3E, 0xF5, 0x3F, 0x75, 0x4E,
- 0x01, 0x80, 0x22, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5,
-/*05D0*/0x47, 0x95, 0x46, 0xF5, 0x3E, 0xC3, 0x13, 0xF5,
- 0x71, 0x25, 0x46, 0xF5, 0x72, 0xD3, 0x94, 0x3F,
-/*05E0*/0x50, 0x05, 0xE4, 0xF5, 0x3F, 0x80, 0x06, 0xE5,
- 0x72, 0x24, 0xC1, 0xF5, 0x3F, 0x05, 0x6F, 0xE5,
-/*05F0*/0x6F, 0xC3, 0x94, 0x02, 0x50, 0x03, 0x02, 0x04,
- 0x6E, 0xE5, 0x6D, 0x45, 0x6C, 0x70, 0x02, 0x80,
-/*0600*/0x04, 0xE5, 0x74, 0x45, 0x75, 0x90, 0x07, 0x2F,
- 0xF0, 0x7F, 0x01, 0xE5, 0x3E, 0x60, 0x04, 0xE5,
-/*0610*/0x3C, 0x70, 0x14, 0xE4, 0xF5, 0x3C, 0xF5, 0x3D,
- 0xF5, 0x3E, 0xF5, 0x3F, 0x12, 0x08, 0xD2, 0x70,
-/*0620*/0x04, 0xF0, 0x02, 0x06, 0xA4, 0x80, 0x7A, 0xE5,
- 0x3C, 0xC3, 0x95, 0x3E, 0x40, 0x07, 0xE5, 0x3C,
-/*0630*/0x95, 0x3E, 0xFF, 0x80, 0x06, 0xC3, 0xE5, 0x3E,
- 0x95, 0x3C, 0xFF, 0xE5, 0x76, 0xD3, 0x95, 0x79,
-/*0640*/0x40, 0x05, 0x85, 0x76, 0x7A, 0x80, 0x03, 0x85,
- 0x79, 0x7A, 0xE5, 0x77, 0xC3, 0x95, 0x78, 0x50,
-/*0650*/0x05, 0x85, 0x77, 0x7B, 0x80, 0x03, 0x85, 0x78,
- 0x7B, 0xE5, 0x7B, 0xD3, 0x95, 0x7A, 0x40, 0x30,
-/*0660*/0xE5, 0x7B, 0x95, 0x7A, 0xF5, 0x3C, 0xF5, 0x3E,
- 0xC3, 0xE5, 0x7B, 0x95, 0x7A, 0x90, 0x07, 0x19,
-/*0670*/0xF0, 0xE5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
- 0x7A, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
-/*0680*/0xE4, 0xF5, 0x3D, 0x80, 0x1F, 0xC3, 0x74, 0x3F,
- 0x95, 0x72, 0xF5, 0x3D, 0xF5, 0x3F, 0x80, 0x14,
-/*0690*/0xE4, 0xF5, 0x3C, 0xF5, 0x3E, 0x90, 0x07, 0x19,
- 0xF0, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06A0*/0x03, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x65, 0x75,
- 0x83, 0xD0, 0xE0, 0x54, 0x0F, 0xFE, 0xAD, 0x3C,
-/*06B0*/0x70, 0x02, 0x7E, 0x07, 0xBE, 0x0F, 0x02, 0x7E,
- 0x80, 0xEE, 0xFB, 0xEF, 0xD3, 0x9B, 0x74, 0x80,
-/*06C0*/0xF8, 0x98, 0x40, 0x1F, 0xE4, 0xF5, 0x3C, 0xF5,
- 0x3E, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
-/*06D0*/0x12, 0x74, 0x01, 0xF0, 0xE5, 0x08, 0xFB, 0xEB,
- 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xD2, 0xE0,
-/*06E0*/0x44, 0x10, 0xF0, 0xE5, 0x08, 0xFB, 0xEB, 0x44,
- 0x09, 0xF5, 0x82, 0x75, 0x83, 0x9E, 0xED, 0xF0,
-/*06F0*/0xEB, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xCA,
- 0xED, 0xF0, 0x12, 0x08, 0x65, 0x75, 0x83, 0xCC,
-/*0700*/0xEF, 0xF0, 0x22, 0xE5, 0x08, 0x44, 0x07, 0xF5,
- 0x82, 0x75, 0x83, 0xBC, 0xE0, 0x54, 0xF0, 0xF0,
-/*0710*/0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83,
- 0xBE, 0xE0, 0x54, 0xF0, 0xF0, 0xE5, 0x08, 0x44,
-/*0720*/0x07, 0xF5, 0x82, 0x75, 0x83, 0xC0, 0xE0, 0x54,
- 0xF0, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
-/*0730*/0x22, 0xF0, 0x90, 0x07, 0x28, 0xE0, 0xFE, 0xA3,
- 0xE0, 0xF5, 0x82, 0x8E, 0x83, 0x22, 0x85, 0x42,
-/*0740*/0x42, 0x85, 0x41, 0x41, 0x85, 0x40, 0x40, 0x74,
- 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E, 0xF5,
-/*0750*/0x83, 0xE5, 0x42, 0xF0, 0x74, 0xE0, 0x2F, 0xF5,
- 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xE5,
-/*0760*/0x42, 0x29, 0xFD, 0xE4, 0x33, 0xFC, 0xE5, 0x3C,
- 0xC3, 0x9D, 0xEC, 0x64, 0x80, 0xF8, 0x74, 0x80,
-/*0770*/0x98, 0x22, 0xF5, 0x83, 0xE0, 0x90, 0x07, 0x22,
- 0x54, 0x1F, 0xFD, 0xE0, 0xFA, 0xA3, 0xE0, 0xF5,
-/*0780*/0x82, 0x8A, 0x83, 0xED, 0xF0, 0x22, 0x90, 0x07,
- 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xF5, 0x82, 0x8C,
-/*0790*/0x83, 0x22, 0x90, 0x07, 0x24, 0xFF, 0xED, 0x44,
- 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22, 0x85,
-/*07A0*/0x38, 0x38, 0x85, 0x39, 0x39, 0x85, 0x3A, 0x3A,
- 0x74, 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E,
-/*07B0*/0xF5, 0x83, 0x22, 0x90, 0x07, 0x26, 0xFF, 0xED,
- 0x44, 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22,
-/*07C0*/0xF0, 0x74, 0xA0, 0x2F, 0xF5, 0x82, 0x74, 0x02,
- 0x3E, 0xF5, 0x83, 0x22, 0x74, 0xC0, 0x25, 0x11,
-/*07D0*/0xF5, 0x82, 0xE4, 0x34, 0x01, 0xF5, 0x83, 0x22,
- 0x74, 0x00, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*07E0*/0x02, 0xF5, 0x83, 0x22, 0x74, 0x60, 0x25, 0x11,
- 0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
-/*07F0*/0x74, 0x80, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
- 0x03, 0xF5, 0x83, 0x22, 0x74, 0xE0, 0x25, 0x11,
-/*0800*/0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
- 0x74, 0x40, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
-/*0810*/0x06, 0xF5, 0x83, 0x22, 0x74, 0x80, 0x2F, 0xF5,
- 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xAF,
-/*0820*/0x08, 0x7E, 0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82,
- 0x22, 0xF5, 0x83, 0xE5, 0x82, 0x44, 0x07, 0xF5,
-/*0830*/0x82, 0xE5, 0x40, 0xF0, 0x22, 0x74, 0x40, 0x25,
- 0x11, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
-/*0840*/0x22, 0x74, 0xC0, 0x25, 0x11, 0xF5, 0x82, 0xE4,
- 0x34, 0x03, 0xF5, 0x83, 0x22, 0x74, 0x00, 0x25,
-/*0850*/0x11, 0xF5, 0x82, 0xE4, 0x34, 0x06, 0xF5, 0x83,
- 0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
-/*0860*/0x34, 0x06, 0xF5, 0x83, 0x22, 0xE5, 0x08, 0xFD,
- 0xED, 0x44, 0x07, 0xF5, 0x82, 0x22, 0xE5, 0x41,
-/*0870*/0xF0, 0xE5, 0x65, 0x64, 0x01, 0x45, 0x64, 0x22,
- 0x7E, 0x00, 0xFB, 0x7A, 0x00, 0xFD, 0x7C, 0x00,
-/*0880*/0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
- 0x34, 0x02, 0x22, 0x74, 0xA0, 0x25, 0x11, 0xF5,
-/*0890*/0x82, 0xE4, 0x34, 0x03, 0x22, 0x85, 0x3E, 0x42,
- 0x85, 0x3F, 0x41, 0x8F, 0x40, 0x22, 0x85, 0x3C,
-/*08A0*/0x42, 0x85, 0x3D, 0x41, 0x8F, 0x40, 0x22, 0x75,
- 0x45, 0x3F, 0x90, 0x07, 0x20, 0xE4, 0xF0, 0xA3,
-/*08B0*/0x22, 0xF5, 0x83, 0xE5, 0x32, 0xF0, 0x05, 0x6E,
- 0xE5, 0x6E, 0xC3, 0x94, 0x40, 0x22, 0xF0, 0xE5,
-/*08C0*/0x08, 0x44, 0x06, 0xF5, 0x82, 0x22, 0x74, 0x00,
- 0x25, 0x6E, 0xF5, 0x82, 0xE4, 0x34, 0x00, 0xF5,
-/*08D0*/0x83, 0x22, 0xE5, 0x6D, 0x45, 0x6C, 0x90, 0x07,
- 0x2F, 0x22, 0xE4, 0xF9, 0xE5, 0x3C, 0xD3, 0x95,
-/*08E0*/0x3E, 0x22, 0x74, 0x80, 0x2E, 0xF5, 0x82, 0xE4,
- 0x34, 0x02, 0xF5, 0x83, 0xE0, 0x22, 0x74, 0xA0,
-/*08F0*/0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
- 0xE0, 0x22, 0x74, 0x80, 0x25, 0x6E, 0xF5, 0x82,
-/*0900*/0xE4, 0x34, 0x00, 0x22, 0x25, 0x42, 0xFD, 0xE4,
- 0x33, 0xFC, 0x22, 0x85, 0x42, 0x42, 0x85, 0x41,
-/*0910*/0x41, 0x85, 0x40, 0x40, 0x22, 0xED, 0x4C, 0x60,
- 0x03, 0x02, 0x09, 0xE5, 0xEF, 0x4E, 0x70, 0x37,
-/*0920*/0x90, 0x07, 0x26, 0x12, 0x07, 0x89, 0xE0, 0xFD,
- 0x12, 0x07, 0xCC, 0xED, 0xF0, 0x90, 0x07, 0x28,
-/*0930*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xD8,
- 0xED, 0xF0, 0x12, 0x07, 0x86, 0xE0, 0x54, 0x1F,
-/*0940*/0xFD, 0x12, 0x08, 0x81, 0xF5, 0x83, 0xED, 0xF0,
- 0x90, 0x07, 0x24, 0x12, 0x07, 0x89, 0xE0, 0x54,
-/*0950*/0x1F, 0xFD, 0x12, 0x08, 0x35, 0xED, 0xF0, 0xEF,
- 0x64, 0x04, 0x4E, 0x70, 0x37, 0x90, 0x07, 0x26,
-/*0960*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xE4,
- 0xED, 0xF0, 0x90, 0x07, 0x28, 0x12, 0x07, 0x89,
-/*0970*/0xE0, 0xFD, 0x12, 0x07, 0xF0, 0xED, 0xF0, 0x12,
- 0x07, 0x86, 0xE0, 0x54, 0x1F, 0xFD, 0x12, 0x08,
-/*0980*/0x8B, 0xF5, 0x83, 0xED, 0xF0, 0x90, 0x07, 0x24,
- 0x12, 0x07, 0x89, 0xE0, 0x54, 0x1F, 0xFD, 0x12,
-/*0990*/0x08, 0x41, 0xED, 0xF0, 0xEF, 0x64, 0x01, 0x4E,
- 0x70, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
-/*09A0*/0xEF, 0x64, 0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01,
- 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x78,
-/*09B0*/0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE0, 0xFF,
- 0x12, 0x07, 0xFC, 0xEF, 0x12, 0x07, 0x31, 0xE0,
-/*09C0*/0xFF, 0x12, 0x08, 0x08, 0xEF, 0xF0, 0x90, 0x07,
- 0x22, 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF,
-/*09D0*/0x12, 0x08, 0x4D, 0xEF, 0xF0, 0x90, 0x07, 0x24,
- 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*09E0*/0x08, 0x59, 0xEF, 0xF0, 0x22, 0x12, 0x07, 0xCC,
- 0xE4, 0xF0, 0x12, 0x07, 0xD8, 0xE4, 0xF0, 0x12,
-/*09F0*/0x08, 0x81, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08,
- 0x35, 0x74, 0x14, 0xF0, 0x12, 0x07, 0xE4, 0xE4,
-/*0A00*/0xF0, 0x12, 0x07, 0xF0, 0xE4, 0xF0, 0x12, 0x08,
- 0x8B, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08, 0x41,
-/*0A10*/0x74, 0x14, 0xF0, 0x12, 0x07, 0xFC, 0xE4, 0xF0,
- 0x12, 0x08, 0x08, 0xE4, 0xF0, 0x12, 0x08, 0x4D,
-/*0A20*/0xE4, 0xF0, 0x12, 0x08, 0x59, 0x74, 0x14, 0xF0,
- 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFC, 0x10, 0xE4,
-/*0A30*/0xF5, 0xFD, 0x75, 0xFE, 0x30, 0xF5, 0xFF, 0xE5,
- 0xE7, 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0xE5,
-/*0A40*/0xE6, 0x20, 0xE7, 0x0B, 0x78, 0xFF, 0xE4, 0xF6,
- 0xD8, 0xFD, 0x53, 0xE6, 0xFE, 0x80, 0x09, 0x78,
-/*0A50*/0x08, 0xE4, 0xF6, 0xD8, 0xFD, 0x53, 0xE6, 0xFE,
- 0x75, 0x81, 0x80, 0xE4, 0xF5, 0xA8, 0xD2, 0xA8,
-/*0A60*/0xC2, 0xA9, 0xD2, 0xAF, 0xE5, 0xE2, 0x20, 0xE5,
- 0x05, 0x20, 0xE6, 0x02, 0x80, 0x03, 0x43, 0xE1,
-/*0A70*/0x02, 0xE5, 0xE2, 0x20, 0xE0, 0x0E, 0x90, 0x00,
- 0x00, 0x7F, 0x00, 0x7E, 0x08, 0xE4, 0xF0, 0xA3,
-/*0A80*/0xDF, 0xFC, 0xDE, 0xFA, 0x02, 0x0A, 0xDB, 0x43,
- 0xFA, 0x01, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83,
-/*0A90*/0xC0, 0x82, 0xC0, 0xD0, 0x12, 0x1C, 0xE7, 0xD0,
- 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0,
-/*0AA0*/0xE0, 0x53, 0xFA, 0xFE, 0x32, 0x02, 0x1B, 0x55,
- 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xF6,
-/*0AB0*/0x08, 0xDF, 0xF9, 0x80, 0x29, 0xE4, 0x93, 0xA3,
- 0xF8, 0x54, 0x07, 0x24, 0x0C, 0xC8, 0xC3, 0x33,
-/*0AC0*/0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40,
- 0x04, 0xF4, 0x56, 0x80, 0x01, 0x46, 0xF6, 0xDF,
-/*0AD0*/0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10,
- 0x20, 0x40, 0x80, 0x90, 0x00, 0x3F, 0xE4, 0x7E,
-/*0AE0*/0x01, 0x93, 0x60, 0xC1, 0xA3, 0xFF, 0x54, 0x3F,
- 0x30, 0xE5, 0x09, 0x54, 0x1F, 0xFE, 0xE4, 0x93,
-/*0AF0*/0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25,
- 0xE0, 0x60, 0xAD, 0x40, 0xB8, 0x80, 0xFE, 0x8C,
-/*0B00*/0x64, 0x8D, 0x65, 0x8A, 0x66, 0x8B, 0x67, 0xE4,
- 0xF5, 0x69, 0xEF, 0x4E, 0x70, 0x03, 0x02, 0x1D,
-/*0B10*/0x55, 0xE4, 0xF5, 0x68, 0xE5, 0x67, 0x45, 0x66,
- 0x70, 0x32, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90,
-/*0B20*/0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE4,
- 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4, 0x12,
-/*0B30*/0x08, 0x70, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0x92, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*0B40*/0xC6, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8,
- 0xE4, 0xF0, 0x80, 0x11, 0x90, 0x07, 0x26, 0x12,
-/*0B50*/0x07, 0x35, 0xE4, 0x12, 0x08, 0x70, 0x70, 0x05,
- 0x12, 0x07, 0x32, 0xE4, 0xF0, 0x12, 0x1D, 0x55,
-/*0B60*/0x12, 0x1E, 0xBF, 0xE5, 0x67, 0x45, 0x66, 0x70,
- 0x33, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90, 0xE5,
-/*0B70*/0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
- 0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x12,
-/*0B80*/0x08, 0x6E, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0x92, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
-/*0B90*/0x83, 0xC6, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
- 0x83, 0xC8, 0x80, 0x0E, 0x90, 0x07, 0x26, 0x12,
-/*0BA0*/0x07, 0x35, 0x12, 0x08, 0x6E, 0x70, 0x06, 0x12,
- 0x07, 0x32, 0xE5, 0x40, 0xF0, 0xAF, 0x69, 0x7E,
-/*0BB0*/0x00, 0xAD, 0x67, 0xAC, 0x66, 0x12, 0x04, 0x44,
- 0x12, 0x07, 0x2A, 0x75, 0x83, 0xCA, 0xE0, 0xD3,
-/*0BC0*/0x94, 0x00, 0x50, 0x0C, 0x05, 0x68, 0xE5, 0x68,
- 0xC3, 0x94, 0x05, 0x50, 0x03, 0x02, 0x0B, 0x14,
-/*0BD0*/0x22, 0x8C, 0x60, 0x8D, 0x61, 0x12, 0x08, 0xDA,
- 0x74, 0x20, 0x40, 0x0D, 0x2F, 0xF5, 0x82, 0x74,
-/*0BE0*/0x03, 0x3E, 0xF5, 0x83, 0xE5, 0x3E, 0xF0, 0x80,
- 0x0B, 0x2F, 0xF5, 0x82, 0x74, 0x03, 0x3E, 0xF5,
-/*0BF0*/0x83, 0xE5, 0x3C, 0xF0, 0xE5, 0x3C, 0xD3, 0x95,
- 0x3E, 0x40, 0x3C, 0xE5, 0x61, 0x45, 0x60, 0x70,
-/*0C00*/0x10, 0xE9, 0x12, 0x09, 0x04, 0xE5, 0x3E, 0x12,
- 0x07, 0x68, 0x40, 0x3B, 0x12, 0x08, 0x95, 0x80,
-/*0C10*/0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40, 0x1D,
- 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05, 0x85,
-/*0C20*/0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F,
- 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x3E, 0x12, 0x07,
-/*0C30*/0xC0, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x43, 0xE5,
- 0x61, 0x45, 0x60, 0x70, 0x19, 0x12, 0x07, 0x5F,
-/*0C40*/0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x27, 0x12,
- 0x09, 0x0B, 0x12, 0x08, 0x14, 0xE5, 0x42, 0x12,
-/*0C50*/0x07, 0xC0, 0xE5, 0x41, 0xF0, 0x22, 0xE5, 0x3C,
- 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C, 0x38,
-/*0C60*/0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39, 0x80,
- 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x08,
-/*0C70*/0x14, 0xE5, 0x3C, 0x12, 0x07, 0xC0, 0xE5, 0x3D,
- 0xF0, 0x22, 0x85, 0x38, 0x38, 0x85, 0x39, 0x39,
-/*0C80*/0x85, 0x3A, 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x38,
- 0x12, 0x07, 0xC0, 0xE5, 0x39, 0xF0, 0x22, 0x7F,
-/*0C90*/0x06, 0x12, 0x17, 0x31, 0x12, 0x1D, 0x23, 0x12,
- 0x0E, 0x04, 0x12, 0x0E, 0x33, 0xE0, 0x44, 0x0A,
-/*0CA0*/0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E, 0x04, 0x12,
- 0x0E, 0x0B, 0xEF, 0xF0, 0xE5, 0x28, 0x30, 0xE5,
-/*0CB0*/0x03, 0xD3, 0x80, 0x01, 0xC3, 0x40, 0x05, 0x75,
- 0x14, 0x20, 0x80, 0x03, 0x75, 0x14, 0x08, 0x12,
-/*0CC0*/0x0E, 0x04, 0x75, 0x83, 0x8A, 0xE5, 0x14, 0xF0,
- 0xB4, 0xFF, 0x05, 0x75, 0x12, 0x80, 0x80, 0x06,
-/*0CD0*/0xE5, 0x14, 0xC3, 0x13, 0xF5, 0x12, 0xE4, 0xF5,
- 0x16, 0xF5, 0x7F, 0x12, 0x19, 0x36, 0x12, 0x13,
-/*0CE0*/0xA3, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x50, 0x09,
- 0x05, 0x16, 0xE5, 0x16, 0xC3, 0x94, 0x14, 0x40,
-/*0CF0*/0xEA, 0xE5, 0xE4, 0x20, 0xE7, 0x28, 0x12, 0x0E,
- 0x04, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
-/*0D00*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
- 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
-/*0D10*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
- 0x5E, 0x60, 0x03, 0x12, 0x1D, 0xD7, 0xE5, 0x7F,
-/*0D20*/0xC3, 0x94, 0x11, 0x40, 0x14, 0x12, 0x0E, 0x04,
- 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x80, 0xF0, 0xE5,
-/*0D30*/0xE4, 0x20, 0xE7, 0x0F, 0x12, 0x1D, 0xD7, 0x80,
- 0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0xD2, 0xE0,
-/*0D40*/0x54, 0x7F, 0xF0, 0x12, 0x1D, 0x23, 0x22, 0x74,
- 0x8A, 0x85, 0x08, 0x82, 0xF5, 0x83, 0xE5, 0x17,
-/*0D50*/0xF0, 0x12, 0x0E, 0x3A, 0xE4, 0xF0, 0x90, 0x07,
- 0x02, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x90,
-/*0D60*/0xEF, 0xF0, 0x74, 0x92, 0xFE, 0xE5, 0x08, 0x44,
- 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x54,
-/*0D70*/0xC0, 0xFD, 0x90, 0x07, 0x03, 0xE0, 0x54, 0x3F,
- 0x4D, 0x8F, 0x82, 0x8E, 0x83, 0xF0, 0x90, 0x07,
-/*0D80*/0x04, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x82,
- 0xEF, 0xF0, 0x90, 0x07, 0x05, 0xE0, 0xFF, 0xED,
-/*0D90*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xB4, 0xEF,
- 0x12, 0x0E, 0x03, 0x75, 0x83, 0x80, 0xE0, 0x54,
-/*0DA0*/0xBF, 0xF0, 0x30, 0x37, 0x0A, 0x12, 0x0E, 0x91,
- 0x75, 0x83, 0x94, 0xE0, 0x44, 0x80, 0xF0, 0x30,
-/*0DB0*/0x38, 0x0A, 0x12, 0x0E, 0x91, 0x75, 0x83, 0x92,
- 0xE0, 0x44, 0x80, 0xF0, 0xE5, 0x28, 0x30, 0xE4,
-/*0DC0*/0x1A, 0x20, 0x39, 0x0A, 0x12, 0x0E, 0x04, 0x75,
- 0x83, 0x88, 0xE0, 0x54, 0x7F, 0xF0, 0x20, 0x3A,
-/*0DD0*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x88, 0xE0,
- 0x54, 0xBF, 0xF0, 0x74, 0x8C, 0xFE, 0x12, 0x0E,
-/*0DE0*/0x04, 0x8E, 0x83, 0xE0, 0x54, 0x0F, 0x12, 0x0E,
- 0x03, 0x75, 0x83, 0x86, 0xE0, 0x54, 0xBF, 0xF0,
-/*0DF0*/0xE5, 0x08, 0x44, 0x06, 0x12, 0x0D, 0xFD, 0x75,
- 0x83, 0x8A, 0xE4, 0xF0, 0x22, 0xF5, 0x82, 0x75,
-/*0E00*/0x83, 0x82, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07,
- 0xF5, 0x82, 0x22, 0x8E, 0x83, 0xE0, 0xF5, 0x10,
-/*0E10*/0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44, 0x01, 0xFF,
- 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07, 0xF5, 0x82,
-/*0E20*/0x22, 0xE5, 0x15, 0xC4, 0x54, 0x07, 0xFF, 0xE5,
- 0x08, 0xFD, 0xED, 0x44, 0x08, 0xF5, 0x82, 0x75,
-/*0E30*/0x83, 0x82, 0x22, 0x75, 0x83, 0x80, 0xE0, 0x44,
- 0x40, 0xF0, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
-/*0E40*/0x75, 0x83, 0x8A, 0x22, 0xE5, 0x16, 0x25, 0xE0,
- 0x25, 0xE0, 0x24, 0xAF, 0xF5, 0x82, 0xE4, 0x34,
-/*0E50*/0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0D, 0x22,
- 0x43, 0xE1, 0x10, 0x43, 0xE1, 0x80, 0x53, 0xE1,
-/*0E60*/0xFD, 0x85, 0xE1, 0x10, 0x22, 0xE5, 0x16, 0x25,
- 0xE0, 0x25, 0xE0, 0x24, 0xB2, 0xF5, 0x82, 0xE4,
-/*0E70*/0x34, 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0x85,
- 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15, 0xF0,
-/*0E80*/0x22, 0xE5, 0xE2, 0x54, 0x20, 0xD3, 0x94, 0x00,
- 0x22, 0xE5, 0xE2, 0x54, 0x40, 0xD3, 0x94, 0x00,
-/*0E90*/0x22, 0xE5, 0x08, 0x44, 0x06, 0xF5, 0x82, 0x22,
- 0xFD, 0xE5, 0x08, 0xFB, 0xEB, 0x44, 0x07, 0xF5,
-/*0EA0*/0x82, 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFE, 0x30,
- 0x22, 0xEF, 0x4E, 0x70, 0x26, 0x12, 0x07, 0xCC,
-/*0EB0*/0xE0, 0xFD, 0x90, 0x07, 0x26, 0x12, 0x07, 0x7B,
- 0x12, 0x07, 0xD8, 0xE0, 0xFD, 0x90, 0x07, 0x28,
-/*0EC0*/0x12, 0x07, 0x7B, 0x12, 0x08, 0x81, 0x12, 0x07,
- 0x72, 0x12, 0x08, 0x35, 0xE0, 0x90, 0x07, 0x24,
-/*0ED0*/0x12, 0x07, 0x78, 0xEF, 0x64, 0x04, 0x4E, 0x70,
- 0x29, 0x12, 0x07, 0xE4, 0xE0, 0xFD, 0x90, 0x07,
-/*0EE0*/0x26, 0x12, 0x07, 0x7B, 0x12, 0x07, 0xF0, 0xE0,
- 0xFD, 0x90, 0x07, 0x28, 0x12, 0x07, 0x7B, 0x12,
-/*0EF0*/0x08, 0x8B, 0x12, 0x07, 0x72, 0x12, 0x08, 0x41,
- 0xE0, 0x54, 0x1F, 0xFD, 0x90, 0x07, 0x24, 0x12,
-/*0F00*/0x07, 0x7B, 0xEF, 0x64, 0x01, 0x4E, 0x70, 0x04,
- 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0xEF, 0x64,
-/*0F10*/0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02,
- 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x35, 0x12, 0x07,
-/*0F20*/0xFC, 0xE0, 0xFF, 0x90, 0x07, 0x26, 0x12, 0x07,
- 0x89, 0xEF, 0xF0, 0x12, 0x08, 0x08, 0xE0, 0xFF,
-/*0F30*/0x90, 0x07, 0x28, 0x12, 0x07, 0x89, 0xEF, 0xF0,
- 0x12, 0x08, 0x4D, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
-/*0F40*/0x07, 0x86, 0xEF, 0xF0, 0x12, 0x08, 0x59, 0xE0,
- 0x54, 0x1F, 0xFF, 0x90, 0x07, 0x24, 0x12, 0x07,
-/*0F50*/0x89, 0xEF, 0xF0, 0x22, 0xE4, 0xF5, 0x53, 0x12,
- 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
-/*0F60*/0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40, 0x04, 0x7E,
- 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x70,
-/*0F70*/0x03, 0x02, 0x0F, 0xF6, 0x85, 0xE1, 0x10, 0x43,
- 0xE1, 0x02, 0x53, 0xE1, 0x0F, 0x85, 0xE1, 0x10,
-/*0F80*/0xE4, 0xF5, 0x51, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
- 0x52, 0x12, 0x0E, 0x89, 0x40, 0x1D, 0xAD, 0x52,
-/*0F90*/0xAF, 0x51, 0x12, 0x11, 0x18, 0xEF, 0x60, 0x08,
- 0x85, 0xE1, 0x10, 0x43, 0xE1, 0x40, 0x80, 0x0B,
-/*0FA0*/0x53, 0xE1, 0xBF, 0x12, 0x0E, 0x58, 0x12, 0x00,
- 0x06, 0x80, 0xFB, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
-/*0FB0*/0x51, 0xE5, 0xE4, 0x54, 0x3F, 0xF5, 0x52, 0x12,
- 0x0E, 0x81, 0x40, 0x1D, 0xAD, 0x52, 0xAF, 0x51,
-/*0FC0*/0x12, 0x11, 0x18, 0xEF, 0x60, 0x08, 0x85, 0xE1,
- 0x10, 0x43, 0xE1, 0x20, 0x80, 0x0B, 0x53, 0xE1,
-/*0FD0*/0xDF, 0x12, 0x0E, 0x58, 0x12, 0x00, 0x06, 0x80,
- 0xFB, 0x12, 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01,
-/*0FE0*/0x80, 0x02, 0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40,
- 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*0FF0*/0x4F, 0x60, 0x03, 0x12, 0x0E, 0x5B, 0x22, 0x12,
- 0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x22,
-/*1000*/0x02, 0x11, 0x00, 0x02, 0x10, 0x40, 0x02, 0x10,
- 0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1010*/0x01, 0x20, 0x01, 0x20, 0xE4, 0xF5, 0x57, 0x12,
- 0x16, 0xBD, 0x12, 0x16, 0x44, 0xE4, 0x12, 0x10,
-/*1020*/0x56, 0x12, 0x14, 0xB7, 0x90, 0x07, 0x26, 0x12,
- 0x07, 0x35, 0xE4, 0x12, 0x07, 0x31, 0xE4, 0xF0,
-/*1030*/0x12, 0x10, 0x56, 0x12, 0x14, 0xB7, 0x90, 0x07,
- 0x26, 0x12, 0x07, 0x35, 0xE5, 0x41, 0x12, 0x07,
-/*1040*/0x31, 0xE5, 0x40, 0xF0, 0xAF, 0x57, 0x7E, 0x00,
- 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
-/*1050*/0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xFF, 0x90,
- 0x07, 0x20, 0xA3, 0xE0, 0xFD, 0xE4, 0xF5, 0x56,
-/*1060*/0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x12,
- 0x11, 0x51, 0x7F, 0x0F, 0x7D, 0x18, 0xE4, 0xF5,
-/*1070*/0x56, 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA,
- 0x12, 0x15, 0x41, 0xAF, 0x56, 0x7E, 0x00, 0x12,
-/*1080*/0x1A, 0xFF, 0xE4, 0xFF, 0xF5, 0x56, 0x7D, 0x1F,
- 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x22,
-/*1090*/0x22, 0xE4, 0xF5, 0x55, 0xE5, 0x08, 0xFD, 0x74,
- 0xA0, 0xF5, 0x56, 0xED, 0x44, 0x07, 0xF5, 0x57,
-/*10A0*/0xE5, 0x28, 0x30, 0xE5, 0x03, 0xD3, 0x80, 0x01,
- 0xC3, 0x40, 0x05, 0x7F, 0x28, 0xEF, 0x80, 0x04,
-/*10B0*/0x7F, 0x14, 0xEF, 0xC3, 0x13, 0xF5, 0x54, 0xE4,
- 0xF9, 0x12, 0x0E, 0x18, 0x75, 0x83, 0x8E, 0xE0,
-/*10C0*/0xF5, 0x10, 0xCE, 0xEF, 0xCE, 0xEE, 0xD3, 0x94,
- 0x00, 0x40, 0x26, 0xE5, 0x10, 0x54, 0xFE, 0x12,
-/*10D0*/0x0E, 0x98, 0x75, 0x83, 0x8E, 0xED, 0xF0, 0xE5,
- 0x10, 0x44, 0x01, 0xFD, 0xEB, 0x44, 0x07, 0xF5,
-/*10E0*/0x82, 0xED, 0xF0, 0x85, 0x57, 0x82, 0x85, 0x56,
- 0x83, 0xE0, 0x30, 0xE3, 0x01, 0x09, 0x1E, 0x80,
-/*10F0*/0xD4, 0xC2, 0x34, 0xE9, 0xC3, 0x95, 0x54, 0x40,
- 0x02, 0xD2, 0x34, 0x22, 0x02, 0x00, 0x06, 0x22,
-/*1100*/0x30, 0x30, 0x11, 0x90, 0x10, 0x00, 0xE4, 0x93,
- 0xF5, 0x10, 0x90, 0x10, 0x10, 0xE4, 0x93, 0xF5,
-/*1110*/0x10, 0x12, 0x10, 0x90, 0x12, 0x11, 0x50, 0x22,
- 0xE4, 0xFC, 0xC3, 0xED, 0x9F, 0xFA, 0xEF, 0xF5,
-/*1120*/0x83, 0x75, 0x82, 0x00, 0x79, 0xFF, 0xE4, 0x93,
- 0xCC, 0x6C, 0xCC, 0xA3, 0xD9, 0xF8, 0xDA, 0xF6,
-/*1130*/0xE5, 0xE2, 0x30, 0xE4, 0x02, 0x8C, 0xE5, 0xED,
- 0x24, 0xFF, 0xFF, 0xEF, 0x75, 0x82, 0xFF, 0xF5,
-/*1140*/0x83, 0xE4, 0x93, 0x6C, 0x70, 0x03, 0x7F, 0x01,
- 0x22, 0x7F, 0x00, 0x22, 0x22, 0x11, 0x00, 0x00,
-/*1150*/0x22, 0x8E, 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D,
- 0x5B, 0x8A, 0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01,
-/*1160*/0xE4, 0xF5, 0x5F, 0xF5, 0x60, 0xF5, 0x62, 0x12,
- 0x07, 0x2A, 0x75, 0x83, 0xD0, 0xE0, 0xFF, 0xC4,
-/*1170*/0x54, 0x0F, 0xF5, 0x61, 0x12, 0x1E, 0xA5, 0x85,
- 0x59, 0x5E, 0xD3, 0xE5, 0x5E, 0x95, 0x5B, 0xE5,
-/*1180*/0x5A, 0x12, 0x07, 0x6B, 0x50, 0x4B, 0x12, 0x07,
- 0x03, 0x75, 0x83, 0xBC, 0xE0, 0x45, 0x5E, 0x12,
-/*1190*/0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x45, 0x5E,
- 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0, 0x45,
-/*11A0*/0x5E, 0xF0, 0xAF, 0x5F, 0xE5, 0x60, 0x12, 0x08,
- 0x78, 0x12, 0x0A, 0xFF, 0xAF, 0x62, 0x7E, 0x00,
-/*11B0*/0xAD, 0x5D, 0xAC, 0x5C, 0x12, 0x04, 0x44, 0xE5,
- 0x61, 0xAF, 0x5E, 0x7E, 0x00, 0xB4, 0x03, 0x05,
-/*11C0*/0x12, 0x1E, 0x21, 0x80, 0x07, 0xAD, 0x5D, 0xAC,
- 0x5C, 0x12, 0x13, 0x17, 0x05, 0x5E, 0x02, 0x11,
-/*11D0*/0x7A, 0x12, 0x07, 0x03, 0x75, 0x83, 0xBC, 0xE0,
- 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBE,
-/*11E0*/0xE0, 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xC0, 0xE0, 0x45, 0x40, 0xF0, 0x22, 0x8E, 0x58,
-/*11F0*/0x8F, 0x59, 0x75, 0x5A, 0x01, 0x79, 0x01, 0x75,
- 0x5B, 0x01, 0xE4, 0xFB, 0x12, 0x07, 0x2A, 0x75,
-/*1200*/0x83, 0xAE, 0xE0, 0x54, 0x1A, 0xFF, 0x12, 0x08,
- 0x65, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0xFE, 0xEF,
-/*1210*/0x70, 0x0C, 0xEE, 0x65, 0x35, 0x70, 0x07, 0x90,
- 0x07, 0x2F, 0xE0, 0xB4, 0x01, 0x0D, 0xAF, 0x35,
-/*1220*/0x7E, 0x00, 0x12, 0x0E, 0xA9, 0xCF, 0xEB, 0xCF,
- 0x02, 0x1E, 0x60, 0xE5, 0x59, 0x64, 0x02, 0x45,
-/*1230*/0x58, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
- 0x00, 0xE5, 0x59, 0x45, 0x58, 0x70, 0x04, 0x7E,
-/*1240*/0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60,
- 0x23, 0x85, 0x41, 0x49, 0x85, 0x40, 0x4B, 0xE5,
-/*1250*/0x59, 0x45, 0x58, 0x70, 0x2C, 0xAF, 0x5A, 0xFE,
- 0xCD, 0xE9, 0xCD, 0xFC, 0xAB, 0x59, 0xAA, 0x58,
-/*1260*/0x12, 0x0A, 0xFF, 0xAF, 0x5B, 0x7E, 0x00, 0x12,
- 0x1E, 0x60, 0x80, 0x15, 0xAF, 0x5B, 0x7E, 0x00,
-/*1270*/0x12, 0x1E, 0x60, 0x90, 0x07, 0x26, 0x12, 0x07,
- 0x35, 0xE5, 0x49, 0x12, 0x07, 0x31, 0xE5, 0x4B,
-/*1280*/0xF0, 0xE4, 0xFD, 0xAF, 0x35, 0xFE, 0xFC, 0x12,
- 0x09, 0x15, 0x22, 0x8C, 0x64, 0x8D, 0x65, 0x12,
-/*1290*/0x08, 0xDA, 0x40, 0x3C, 0xE5, 0x65, 0x45, 0x64,
- 0x70, 0x10, 0x12, 0x09, 0x04, 0xC3, 0xE5, 0x3E,
-/*12A0*/0x12, 0x07, 0x69, 0x40, 0x3B, 0x12, 0x08, 0x95,
- 0x80, 0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40,
-/*12B0*/0x1D, 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05,
- 0x85, 0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39,
-/*12C0*/0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3E, 0x12,
- 0x07, 0x53, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x3B,
-/*12D0*/0xE5, 0x65, 0x45, 0x64, 0x70, 0x11, 0x12, 0x07,
- 0x5F, 0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x1F,
-/*12E0*/0x12, 0x07, 0x3E, 0xE5, 0x41, 0xF0, 0x22, 0xE5,
- 0x3C, 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C,
-/*12F0*/0x38, 0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39,
- 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12,
-/*1300*/0x07, 0xA8, 0xE5, 0x3C, 0x12, 0x07, 0x53, 0xE5,
- 0x3D, 0xF0, 0x22, 0x12, 0x07, 0x9F, 0xE5, 0x38,
-/*1310*/0x12, 0x07, 0x53, 0xE5, 0x39, 0xF0, 0x22, 0x8C,
- 0x63, 0x8D, 0x64, 0x12, 0x08, 0xDA, 0x40, 0x3C,
-/*1320*/0xE5, 0x64, 0x45, 0x63, 0x70, 0x10, 0x12, 0x09,
- 0x04, 0xC3, 0xE5, 0x3E, 0x12, 0x07, 0x69, 0x40,
-/*1330*/0x3B, 0x12, 0x08, 0x95, 0x80, 0x18, 0xE5, 0x3E,
- 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3E, 0x38,
-/*1340*/0xE5, 0x3E, 0x60, 0x05, 0x85, 0x3F, 0x39, 0x80,
- 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x07,
-/*1350*/0xA8, 0xE5, 0x3E, 0x12, 0x07, 0x53, 0xE5, 0x3F,
- 0xF0, 0x22, 0x80, 0x3B, 0xE5, 0x64, 0x45, 0x63,
-/*1360*/0x70, 0x11, 0x12, 0x07, 0x5F, 0x40, 0x05, 0x12,
- 0x08, 0x9E, 0x80, 0x1F, 0x12, 0x07, 0x3E, 0xE5,
-/*1370*/0x41, 0xF0, 0x22, 0xE5, 0x3C, 0xC3, 0x95, 0x38,
- 0x40, 0x1D, 0x85, 0x3C, 0x38, 0xE5, 0x3C, 0x60,
-/*1380*/0x05, 0x85, 0x3D, 0x39, 0x80, 0x03, 0x85, 0x39,
- 0x39, 0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3C,
-/*1390*/0x12, 0x07, 0x53, 0xE5, 0x3D, 0xF0, 0x22, 0x12,
- 0x07, 0x9F, 0xE5, 0x38, 0x12, 0x07, 0x53, 0xE5,
-/*13A0*/0x39, 0xF0, 0x22, 0xE5, 0x0D, 0xFE, 0xE5, 0x08,
- 0x8E, 0x54, 0x44, 0x05, 0xF5, 0x55, 0x75, 0x15,
-/*13B0*/0x0F, 0xF5, 0x82, 0x12, 0x0E, 0x7A, 0x12, 0x17,
- 0xA3, 0x20, 0x31, 0x05, 0x75, 0x15, 0x03, 0x80,
-/*13C0*/0x03, 0x75, 0x15, 0x0B, 0xE5, 0x0A, 0xC3, 0x94,
- 0x01, 0x50, 0x38, 0x12, 0x14, 0x20, 0x20, 0x31,
-/*13D0*/0x06, 0x05, 0x15, 0x05, 0x15, 0x80, 0x04, 0x15,
- 0x15, 0x15, 0x15, 0xE5, 0x0A, 0xC3, 0x94, 0x01,
-/*13E0*/0x50, 0x21, 0x12, 0x14, 0x20, 0x20, 0x31, 0x04,
- 0x05, 0x15, 0x80, 0x02, 0x15, 0x15, 0xE5, 0x0A,
-/*13F0*/0xC3, 0x94, 0x01, 0x50, 0x0E, 0x12, 0x0E, 0x77,
- 0x12, 0x17, 0xA3, 0x20, 0x31, 0x05, 0x05, 0x15,
-/*1400*/0x12, 0x0E, 0x77, 0xE5, 0x15, 0xB4, 0x08, 0x04,
- 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x15,
-/*1410*/0xB4, 0x07, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E,
- 0x00, 0xEE, 0x4F, 0x60, 0x02, 0x05, 0x7F, 0x22,
-/*1420*/0x85, 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15,
- 0xF0, 0x12, 0x17, 0xA3, 0x22, 0x12, 0x07, 0x2A,
-/*1430*/0x75, 0x83, 0xAE, 0x74, 0xFF, 0x12, 0x07, 0x29,
- 0xE0, 0x54, 0x1A, 0xF5, 0x34, 0xE0, 0xC4, 0x13,
-/*1440*/0x54, 0x07, 0xF5, 0x35, 0x24, 0xFE, 0x60, 0x24,
- 0x24, 0xFE, 0x60, 0x3C, 0x24, 0x04, 0x70, 0x63,
-/*1450*/0x75, 0x31, 0x2D, 0xE5, 0x08, 0xFD, 0x74, 0xB6,
- 0x12, 0x07, 0x92, 0x74, 0xBC, 0x90, 0x07, 0x22,
-/*1460*/0x12, 0x07, 0x95, 0x74, 0x90, 0x12, 0x07, 0xB3,
- 0x74, 0x92, 0x80, 0x3C, 0x75, 0x31, 0x3A, 0xE5,
-/*1470*/0x08, 0xFD, 0x74, 0xBA, 0x12, 0x07, 0x92, 0x74,
- 0xC0, 0x90, 0x07, 0x22, 0x12, 0x07, 0xB6, 0x74,
-/*1480*/0xC4, 0x12, 0x07, 0xB3, 0x74, 0xC8, 0x80, 0x20,
- 0x75, 0x31, 0x35, 0xE5, 0x08, 0xFD, 0x74, 0xB8,
-/*1490*/0x12, 0x07, 0x92, 0x74, 0xBE, 0xFF, 0xED, 0x44,
- 0x07, 0x90, 0x07, 0x22, 0xCF, 0xF0, 0xA3, 0xEF,
-/*14A0*/0xF0, 0x74, 0xC2, 0x12, 0x07, 0xB3, 0x74, 0xC6,
- 0xFF, 0xED, 0x44, 0x07, 0xA3, 0xCF, 0xF0, 0xA3,
-/*14B0*/0xEF, 0xF0, 0x22, 0x75, 0x34, 0x01, 0x22, 0x8E,
- 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D, 0x5B, 0x8A,
-/*14C0*/0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01, 0xE4, 0xF5,
- 0x5F, 0x12, 0x1E, 0xA5, 0x85, 0x59, 0x5E, 0xD3,
-/*14D0*/0xE5, 0x5E, 0x95, 0x5B, 0xE5, 0x5A, 0x12, 0x07,
- 0x6B, 0x50, 0x57, 0xE5, 0x5D, 0x45, 0x5C, 0x70,
-/*14E0*/0x30, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x92, 0xE5,
- 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE5,
-/*14F0*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8, 0xE5,
- 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0x90, 0xE5,
-/*1500*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
- 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x80,
-/*1510*/0x03, 0x12, 0x07, 0x32, 0xE5, 0x5E, 0xF0, 0xAF,
- 0x5F, 0x7E, 0x00, 0xAD, 0x5D, 0xAC, 0x5C, 0x12,
-/*1520*/0x04, 0x44, 0xAF, 0x5E, 0x7E, 0x00, 0xAD, 0x5D,
- 0xAC, 0x5C, 0x12, 0x0B, 0xD1, 0x05, 0x5E, 0x02,
-/*1530*/0x14, 0xCF, 0xAB, 0x5D, 0xAA, 0x5C, 0xAD, 0x5B,
- 0xAC, 0x5A, 0xAF, 0x59, 0xAE, 0x58, 0x02, 0x1B,
-/*1540*/0xFB, 0x8C, 0x5C, 0x8D, 0x5D, 0x8A, 0x5E, 0x8B,
- 0x5F, 0x75, 0x60, 0x01, 0xE4, 0xF5, 0x61, 0xF5,
-/*1550*/0x62, 0xF5, 0x63, 0x12, 0x1E, 0xA5, 0x8F, 0x60,
- 0xD3, 0xE5, 0x60, 0x95, 0x5D, 0xE5, 0x5C, 0x12,
-/*1560*/0x07, 0x6B, 0x50, 0x61, 0xE5, 0x5F, 0x45, 0x5E,
- 0x70, 0x27, 0x12, 0x07, 0x2A, 0x75, 0x83, 0xB6,
-/*1570*/0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xB8,
- 0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBA,
-/*1580*/0xE5, 0x60, 0xF0, 0xAF, 0x61, 0x7E, 0x00, 0xE5,
- 0x62, 0x12, 0x08, 0x7A, 0x12, 0x0A, 0xFF, 0x80,
-/*1590*/0x19, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE5,
- 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0x8E, 0xE4,
-/*15A0*/0x12, 0x07, 0x29, 0x74, 0x01, 0x12, 0x07, 0x29,
- 0xE4, 0xF0, 0xAF, 0x63, 0x7E, 0x00, 0xAD, 0x5F,
-/*15B0*/0xAC, 0x5E, 0x12, 0x04, 0x44, 0xAF, 0x60, 0x7E,
- 0x00, 0xAD, 0x5F, 0xAC, 0x5E, 0x12, 0x12, 0x8B,
-/*15C0*/0x05, 0x60, 0x02, 0x15, 0x58, 0x22, 0x90, 0x11,
- 0x4D, 0xE4, 0x93, 0x90, 0x07, 0x2E, 0xF0, 0x12,
-/*15D0*/0x08, 0x1F, 0x75, 0x83, 0xAE, 0xE0, 0x54, 0x1A,
- 0xF5, 0x34, 0x70, 0x67, 0xEF, 0x44, 0x07, 0xF5,
-/*15E0*/0x82, 0x75, 0x83, 0xCE, 0xE0, 0xFF, 0x13, 0x13,
- 0x13, 0x54, 0x07, 0xF5, 0x36, 0x54, 0x0F, 0xD3,
-/*15F0*/0x94, 0x00, 0x40, 0x06, 0x12, 0x14, 0x2D, 0x12,
- 0x1B, 0xA9, 0xE5, 0x36, 0x54, 0x0F, 0x24, 0xFE,
-/*1600*/0x60, 0x0C, 0x14, 0x60, 0x0C, 0x14, 0x60, 0x19,
- 0x24, 0x03, 0x70, 0x37, 0x80, 0x10, 0x02, 0x1E,
-/*1610*/0x91, 0x12, 0x1E, 0x91, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0xCE, 0xE0, 0x54, 0xEF, 0xF0, 0x02, 0x1D,
-/*1620*/0xAE, 0x12, 0x10, 0x14, 0xE4, 0xF5, 0x55, 0x12,
- 0x1D, 0x85, 0x05, 0x55, 0xE5, 0x55, 0xC3, 0x94,
-/*1630*/0x05, 0x40, 0xF4, 0x12, 0x07, 0x2A, 0x75, 0x83,
- 0xCE, 0xE0, 0x54, 0xC7, 0x12, 0x07, 0x29, 0xE0,
-/*1640*/0x44, 0x08, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
- 0x59, 0xAF, 0x08, 0xEF, 0x44, 0x07, 0xF5, 0x82,
-/*1650*/0x75, 0x83, 0xD0, 0xE0, 0xFD, 0xC4, 0x54, 0x0F,
- 0xF5, 0x5A, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0x75,
-/*1660*/0x83, 0x80, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x21,
- 0x75, 0x83, 0x82, 0xE5, 0x45, 0xF0, 0xEF, 0x44,
-/*1670*/0x07, 0xF5, 0x82, 0x75, 0x83, 0x8A, 0x74, 0xFF,
- 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x07, 0x2A, 0x75,
-/*1680*/0x83, 0xBC, 0xE0, 0x54, 0xEF, 0x12, 0x07, 0x29,
- 0x75, 0x83, 0xBE, 0xE0, 0x54, 0xEF, 0x12, 0x07,
-/*1690*/0x29, 0x75, 0x83, 0xC0, 0xE0, 0x54, 0xEF, 0x12,
- 0x07, 0x29, 0x75, 0x83, 0xBC, 0xE0, 0x44, 0x10,
-/*16A0*/0x12, 0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x44,
- 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0,
-/*16B0*/0x44, 0x10, 0xF0, 0xAF, 0x58, 0xE5, 0x59, 0x12,
- 0x08, 0x78, 0x02, 0x0A, 0xFF, 0xE4, 0xF5, 0x58,
-/*16C0*/0x7D, 0x01, 0xF5, 0x59, 0xAF, 0x35, 0xFE, 0xFC,
- 0x12, 0x09, 0x15, 0x12, 0x07, 0x2A, 0x75, 0x83,
-/*16D0*/0xB6, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xB8, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16E0*/0xBA, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xBC, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*16F0*/0xBE, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
- 0xC0, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
-/*1700*/0x90, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2,
- 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4,
-/*1710*/0x12, 0x07, 0x29, 0x75, 0x83, 0x92, 0xE4, 0x12,
- 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE4, 0x12, 0x07,
-/*1720*/0x29, 0x75, 0x83, 0xC8, 0xE4, 0xF0, 0xAF, 0x58,
- 0xFE, 0xE5, 0x59, 0x12, 0x08, 0x7A, 0x02, 0x0A,
-/*1730*/0xFF, 0xE5, 0xE2, 0x30, 0xE4, 0x6C, 0xE5, 0xE7,
- 0x54, 0xC0, 0x64, 0x40, 0x70, 0x64, 0xE5, 0x09,
-/*1740*/0xC4, 0x54, 0x30, 0xFE, 0xE5, 0x08, 0x25, 0xE0,
- 0x25, 0xE0, 0x54, 0xC0, 0x4E, 0xFE, 0xEF, 0x54,
-/*1750*/0x3F, 0x4E, 0xFD, 0xE5, 0x2B, 0xAE, 0x2A, 0x78,
- 0x02, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
-/*1760*/0xF5, 0x82, 0x8E, 0x83, 0xED, 0xF0, 0xE5, 0x2B,
- 0xAE, 0x2A, 0x78, 0x02, 0xC3, 0x33, 0xCE, 0x33,
-/*1770*/0xCE, 0xD8, 0xF9, 0xFF, 0xF5, 0x82, 0x8E, 0x83,
- 0xA3, 0xE5, 0xFE, 0xF0, 0x8F, 0x82, 0x8E, 0x83,
-/*1780*/0xA3, 0xA3, 0xE5, 0xFD, 0xF0, 0x8F, 0x82, 0x8E,
- 0x83, 0xA3, 0xA3, 0xA3, 0xE5, 0xFC, 0xF0, 0xC3,
-/*1790*/0xE5, 0x2B, 0x94, 0xFA, 0xE5, 0x2A, 0x94, 0x00,
- 0x50, 0x08, 0x05, 0x2B, 0xE5, 0x2B, 0x70, 0x02,
-/*17A0*/0x05, 0x2A, 0x22, 0xE4, 0xFF, 0xE4, 0xF5, 0x58,
- 0xF5, 0x56, 0xF5, 0x57, 0x74, 0x82, 0xFC, 0x12,
-/*17B0*/0x0E, 0x04, 0x8C, 0x83, 0xE0, 0xF5, 0x10, 0x54,
- 0x7F, 0xF0, 0xE5, 0x10, 0x44, 0x80, 0x12, 0x0E,
-/*17C0*/0x98, 0xED, 0xF0, 0x7E, 0x0A, 0x12, 0x0E, 0x04,
- 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0, 0x26, 0xDE,
-/*17D0*/0xF4, 0x05, 0x57, 0xE5, 0x57, 0x70, 0x02, 0x05,
- 0x56, 0xE5, 0x14, 0x24, 0x01, 0xFD, 0xE4, 0x33,
-/*17E0*/0xFC, 0xD3, 0xE5, 0x57, 0x9D, 0xE5, 0x56, 0x9C,
- 0x40, 0xD9, 0xE5, 0x0A, 0x94, 0x20, 0x50, 0x02,
-/*17F0*/0x05, 0x0A, 0x43, 0xE1, 0x08, 0xC2, 0x31, 0x12,
- 0x0E, 0x04, 0x75, 0x83, 0xA6, 0xE0, 0x55, 0x12,
-/*1800*/0x65, 0x12, 0x70, 0x03, 0xD2, 0x31, 0x22, 0xC2,
- 0x31, 0x22, 0x90, 0x07, 0x26, 0xE0, 0xFA, 0xA3,
-/*1810*/0xE0, 0xF5, 0x82, 0x8A, 0x83, 0xE0, 0xF5, 0x41,
- 0xE5, 0x39, 0xC3, 0x95, 0x41, 0x40, 0x26, 0xE5,
-/*1820*/0x39, 0x95, 0x41, 0xC3, 0x9F, 0xEE, 0x12, 0x07,
- 0x6B, 0x40, 0x04, 0x7C, 0x01, 0x80, 0x02, 0x7C,
-/*1830*/0x00, 0xE5, 0x41, 0x64, 0x3F, 0x60, 0x04, 0x7B,
- 0x01, 0x80, 0x02, 0x7B, 0x00, 0xEC, 0x5B, 0x60,
-/*1840*/0x29, 0x05, 0x41, 0x80, 0x28, 0xC3, 0xE5, 0x41,
- 0x95, 0x39, 0xC3, 0x9F, 0xEE, 0x12, 0x07, 0x6B,
-/*1850*/0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00,
- 0xE5, 0x41, 0x60, 0x04, 0x7E, 0x01, 0x80, 0x02,
-/*1860*/0x7E, 0x00, 0xEF, 0x5E, 0x60, 0x04, 0x15, 0x41,
- 0x80, 0x03, 0x85, 0x39, 0x41, 0x85, 0x3A, 0x40,
-/*1870*/0x22, 0xE5, 0xE2, 0x30, 0xE4, 0x60, 0xE5, 0xE1,
- 0x30, 0xE2, 0x5B, 0xE5, 0x09, 0x70, 0x04, 0x7F,
-/*1880*/0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x08, 0x70,
- 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
-/*1890*/0x5F, 0x60, 0x43, 0x53, 0xF9, 0xF8, 0xE5, 0xE2,
- 0x30, 0xE4, 0x3B, 0xE5, 0xE1, 0x30, 0xE2, 0x2E,
-/*18A0*/0x43, 0xFA, 0x02, 0x53, 0xFA, 0xFB, 0xE4, 0xF5,
- 0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0xE5,
-/*18B0*/0xE1, 0x30, 0xE2, 0xE7, 0x90, 0x94, 0x70, 0xE0,
- 0x65, 0x10, 0x60, 0x03, 0x43, 0xFA, 0x04, 0x05,
-/*18C0*/0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0x70,
- 0xE6, 0x12, 0x00, 0x06, 0x80, 0xE1, 0x53, 0xFA,
-/*18D0*/0xFD, 0x53, 0xFA, 0xFB, 0x80, 0xC0, 0x22, 0x8F,
- 0x54, 0x12, 0x00, 0x06, 0xE5, 0xE1, 0x30, 0xE0,
-/*18E0*/0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5,
- 0x7E, 0xD3, 0x94, 0x05, 0x40, 0x04, 0x7E, 0x01,
-/*18F0*/0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60, 0x3D,
- 0x85, 0x54, 0x11, 0xE5, 0xE2, 0x20, 0xE1, 0x32,
-/*1900*/0x74, 0xCE, 0x12, 0x1A, 0x05, 0x30, 0xE7, 0x04,
- 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0x8F, 0x82,
-/*1910*/0x8E, 0x83, 0xE0, 0x30, 0xE6, 0x04, 0x7F, 0x01,
- 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x5D, 0x70, 0x15,
-/*1920*/0x12, 0x15, 0xC6, 0x74, 0xCE, 0x12, 0x1A, 0x05,
- 0x30, 0xE6, 0x07, 0xE0, 0x44, 0x80, 0xF0, 0x43,
-/*1930*/0xF9, 0x80, 0x12, 0x18, 0x71, 0x22, 0x12, 0x0E,
- 0x44, 0xE5, 0x16, 0x25, 0xE0, 0x25, 0xE0, 0x24,
-/*1940*/0xB0, 0xF5, 0x82, 0xE4, 0x34, 0x1A, 0xF5, 0x83,
- 0xE4, 0x93, 0xF5, 0x0F, 0xE5, 0x16, 0x25, 0xE0,
-/*1950*/0x25, 0xE0, 0x24, 0xB1, 0xF5, 0x82, 0xE4, 0x34,
- 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0E, 0x12,
-/*1960*/0x0E, 0x65, 0xF5, 0x10, 0xE5, 0x0F, 0x54, 0xF0,
- 0x12, 0x0E, 0x17, 0x75, 0x83, 0x8C, 0xEF, 0xF0,
-/*1970*/0xE5, 0x0F, 0x30, 0xE0, 0x0C, 0x12, 0x0E, 0x04,
- 0x75, 0x83, 0x86, 0xE0, 0x44, 0x40, 0xF0, 0x80,
-/*1980*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x86, 0xE0,
- 0x54, 0xBF, 0xF0, 0x12, 0x0E, 0x91, 0x75, 0x83,
-/*1990*/0x82, 0xE5, 0x0E, 0xF0, 0x22, 0x7F, 0x05, 0x12,
- 0x17, 0x31, 0x12, 0x0E, 0x04, 0x12, 0x0E, 0x33,
-/*19A0*/0x74, 0x02, 0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E,
- 0x04, 0x12, 0x0E, 0x0B, 0xEF, 0xF0, 0x75, 0x15,
-/*19B0*/0x70, 0x12, 0x0F, 0xF7, 0x20, 0x34, 0x05, 0x75,
- 0x15, 0x10, 0x80, 0x03, 0x75, 0x15, 0x50, 0x12,
-/*19C0*/0x0F, 0xF7, 0x20, 0x34, 0x04, 0x74, 0x10, 0x80,
- 0x02, 0x74, 0xF0, 0x25, 0x15, 0xF5, 0x15, 0x12,
-/*19D0*/0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x20,
- 0x34, 0x17, 0xE5, 0x15, 0x64, 0x30, 0x60, 0x0C,
-/*19E0*/0x74, 0x10, 0x25, 0x15, 0xF5, 0x15, 0xB4, 0x80,
- 0x03, 0xE4, 0xF5, 0x15, 0x12, 0x0E, 0x21, 0xEF,
-/*19F0*/0xF0, 0x22, 0xF0, 0xE5, 0x0B, 0x25, 0xE0, 0x25,
- 0xE0, 0x24, 0x82, 0xF5, 0x82, 0xE4, 0x34, 0x07,
-/*1A00*/0xF5, 0x83, 0x22, 0x74, 0x88, 0xFE, 0xE5, 0x08,
- 0x44, 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0,
-/*1A10*/0x22, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
- 0x22, 0xF0, 0xE0, 0x54, 0xC0, 0x8F, 0x82, 0x8E,
-/*1A20*/0x83, 0xF0, 0x22, 0xEF, 0x44, 0x07, 0xF5, 0x82,
- 0x75, 0x83, 0x86, 0xE0, 0x54, 0x10, 0xD3, 0x94,
-/*1A30*/0x00, 0x22, 0xF0, 0x90, 0x07, 0x15, 0xE0, 0x04,
- 0xF0, 0x22, 0x44, 0x06, 0xF5, 0x82, 0x75, 0x83,
-/*1A40*/0x9E, 0xE0, 0x22, 0xFE, 0xEF, 0x44, 0x07, 0xF5,
- 0x82, 0x8E, 0x83, 0xE0, 0x22, 0xE4, 0x90, 0x07,
-/*1A50*/0x2A, 0xF0, 0xA3, 0xF0, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0x82, 0xE0, 0x54, 0x7F, 0x12, 0x07, 0x29,
-/*1A60*/0xE0, 0x44, 0x80, 0xF0, 0x12, 0x10, 0xFC, 0x12,
- 0x08, 0x1F, 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0,
-/*1A70*/0x1A, 0x90, 0x07, 0x2B, 0xE0, 0x04, 0xF0, 0x70,
- 0x06, 0x90, 0x07, 0x2A, 0xE0, 0x04, 0xF0, 0x90,
-/*1A80*/0x07, 0x2A, 0xE0, 0xB4, 0x10, 0xE1, 0xA3, 0xE0,
- 0xB4, 0x00, 0xDC, 0xEE, 0x44, 0xA6, 0xFC, 0xEF,
-/*1A90*/0x44, 0x07, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0xF5,
- 0x32, 0xEE, 0x44, 0xA8, 0xFE, 0xEF, 0x44, 0x07,
-/*1AA0*/0xF5, 0x82, 0x8E, 0x83, 0xE0, 0xF5, 0x33, 0x22,
- 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x90,
-/*1AB0*/0x00, 0x20, 0x0F, 0x92, 0x00, 0x21, 0x0F, 0x94,
- 0x00, 0x22, 0x0F, 0x96, 0x00, 0x23, 0x0F, 0x98,
-/*1AC0*/0x00, 0x24, 0x0F, 0x9A, 0x00, 0x25, 0x0F, 0x9C,
- 0x00, 0x26, 0x0F, 0x9E, 0x00, 0x27, 0x0F, 0xA0,
-/*1AD0*/0x01, 0x20, 0x01, 0xA2, 0x01, 0x21, 0x01, 0xA4,
- 0x01, 0x22, 0x01, 0xA6, 0x01, 0x23, 0x01, 0xA8,
-/*1AE0*/0x01, 0x24, 0x01, 0xAA, 0x01, 0x25, 0x01, 0xAC,
- 0x01, 0x26, 0x01, 0xAE, 0x01, 0x27, 0x01, 0xB0,
-/*1AF0*/0x01, 0x28, 0x01, 0xB4, 0x00, 0x28, 0x0F, 0xB6,
- 0x40, 0x28, 0x0F, 0xB8, 0x61, 0x28, 0x01, 0xCB,
-/*1B00*/0xEF, 0xCB, 0xCA, 0xEE, 0xCA, 0x7F, 0x01, 0xE4,
- 0xFD, 0xEB, 0x4A, 0x70, 0x24, 0xE5, 0x08, 0xF5,
-/*1B10*/0x82, 0x74, 0xB6, 0x12, 0x08, 0x29, 0xE5, 0x08,
- 0xF5, 0x82, 0x74, 0xB8, 0x12, 0x08, 0x29, 0xE5,
-/*1B20*/0x08, 0xF5, 0x82, 0x74, 0xBA, 0x12, 0x08, 0x29,
- 0x7E, 0x00, 0x7C, 0x00, 0x12, 0x0A, 0xFF, 0x80,
-/*1B30*/0x12, 0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE5,
- 0x41, 0xF0, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35,
-/*1B40*/0xE5, 0x40, 0xF0, 0x12, 0x07, 0x2A, 0x75, 0x83,
- 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74, 0x01, 0x12,
-/*1B50*/0x07, 0x29, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x26,
- 0xF5, 0x27, 0x53, 0xE1, 0xFE, 0xF5, 0x2A, 0x75,
-/*1B60*/0x2B, 0x01, 0xF5, 0x08, 0x7F, 0x01, 0x12, 0x17,
- 0x31, 0x30, 0x30, 0x1C, 0x90, 0x1A, 0xA9, 0xE4,
-/*1B70*/0x93, 0xF5, 0x10, 0x90, 0x1F, 0xF9, 0xE4, 0x93,
- 0xF5, 0x10, 0x90, 0x00, 0x41, 0xE4, 0x93, 0xF5,
-/*1B80*/0x10, 0x90, 0x1E, 0xCA, 0xE4, 0x93, 0xF5, 0x10,
- 0x7F, 0x02, 0x12, 0x17, 0x31, 0x12, 0x0F, 0x54,
-/*1B90*/0x7F, 0x03, 0x12, 0x17, 0x31, 0x12, 0x00, 0x06,
- 0xE5, 0xE2, 0x30, 0xE7, 0x09, 0x12, 0x10, 0x00,
-/*1BA0*/0x30, 0x30, 0x03, 0x12, 0x11, 0x00, 0x02, 0x00,
- 0x47, 0x12, 0x08, 0x1F, 0x75, 0x83, 0xD0, 0xE0,
-/*1BB0*/0xC4, 0x54, 0x0F, 0xFD, 0x75, 0x43, 0x01, 0x75,
- 0x44, 0xFF, 0x12, 0x08, 0xAA, 0x74, 0x04, 0xF0,
-/*1BC0*/0x75, 0x3B, 0x01, 0xED, 0x14, 0x60, 0x0C, 0x14,
- 0x60, 0x0B, 0x14, 0x60, 0x0F, 0x24, 0x03, 0x70,
-/*1BD0*/0x0B, 0x80, 0x09, 0x80, 0x00, 0x12, 0x08, 0xA7,
- 0x04, 0xF0, 0x80, 0x06, 0x12, 0x08, 0xA7, 0x74,
-/*1BE0*/0x04, 0xF0, 0xEE, 0x44, 0x82, 0xFE, 0xEF, 0x44,
- 0x07, 0xF5, 0x82, 0x8E, 0x83, 0xE5, 0x45, 0x12,
-/*1BF0*/0x08, 0xBE, 0x75, 0x83, 0x82, 0xE5, 0x31, 0xF0,
- 0x02, 0x11, 0x4C, 0x8E, 0x60, 0x8F, 0x61, 0x12,
-/*1C00*/0x1E, 0xA5, 0xE4, 0xFF, 0xCE, 0xED, 0xCE, 0xEE,
- 0xD3, 0x95, 0x61, 0xE5, 0x60, 0x12, 0x07, 0x6B,
-/*1C10*/0x40, 0x39, 0x74, 0x20, 0x2E, 0xF5, 0x82, 0xE4,
- 0x34, 0x03, 0xF5, 0x83, 0xE0, 0x70, 0x03, 0xFF,
-/*1C20*/0x80, 0x26, 0x12, 0x08, 0xE2, 0xFD, 0xC3, 0x9F,
- 0x40, 0x1E, 0xCF, 0xED, 0xCF, 0xEB, 0x4A, 0x70,
-/*1C30*/0x0B, 0x8D, 0x42, 0x12, 0x08, 0xEE, 0xF5, 0x41,
- 0x8E, 0x40, 0x80, 0x0C, 0x12, 0x08, 0xE2, 0xF5,
-/*1C40*/0x38, 0x12, 0x08, 0xEE, 0xF5, 0x39, 0x8E, 0x3A,
- 0x1E, 0x80, 0xBC, 0x22, 0x75, 0x58, 0x01, 0xE5,
-/*1C50*/0x35, 0x70, 0x0C, 0x12, 0x07, 0xCC, 0xE0, 0xF5,
- 0x4A, 0x12, 0x07, 0xD8, 0xE0, 0xF5, 0x4C, 0xE5,
-/*1C60*/0x35, 0xB4, 0x04, 0x0C, 0x12, 0x07, 0xE4, 0xE0,
- 0xF5, 0x4A, 0x12, 0x07, 0xF0, 0xE0, 0xF5, 0x4C,
-/*1C70*/0xE5, 0x35, 0xB4, 0x01, 0x04, 0x7F, 0x01, 0x80,
- 0x02, 0x7F, 0x00, 0xE5, 0x35, 0xB4, 0x02, 0x04,
-/*1C80*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F,
- 0x60, 0x0C, 0x12, 0x07, 0xFC, 0xE0, 0xF5, 0x4A,
-/*1C90*/0x12, 0x08, 0x08, 0xE0, 0xF5, 0x4C, 0x85, 0x41,
- 0x49, 0x85, 0x40, 0x4B, 0x22, 0x75, 0x5B, 0x01,
-/*1CA0*/0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE0, 0x54,
- 0x1F, 0xFF, 0xD3, 0x94, 0x02, 0x50, 0x04, 0x8F,
-/*1CB0*/0x58, 0x80, 0x05, 0xEF, 0x24, 0xFE, 0xF5, 0x58,
- 0xEF, 0xC3, 0x94, 0x18, 0x40, 0x05, 0x75, 0x59,
-/*1CC0*/0x18, 0x80, 0x04, 0xEF, 0x04, 0xF5, 0x59, 0x85,
- 0x43, 0x5A, 0xAF, 0x58, 0x7E, 0x00, 0xAD, 0x59,
-/*1CD0*/0x7C, 0x00, 0xAB, 0x5B, 0x7A, 0x00, 0x12, 0x15,
- 0x41, 0xAF, 0x5A, 0x7E, 0x00, 0x12, 0x18, 0x0A,
-/*1CE0*/0xAF, 0x5B, 0x7E, 0x00, 0x02, 0x1A, 0xFF, 0xE5,
- 0xE2, 0x30, 0xE7, 0x0E, 0x12, 0x10, 0x03, 0xC2,
-/*1CF0*/0x30, 0x30, 0x30, 0x03, 0x12, 0x10, 0xFF, 0x20,
- 0x33, 0x28, 0xE5, 0xE7, 0x30, 0xE7, 0x05, 0x12,
-/*1D00*/0x0E, 0xA2, 0x80, 0x0D, 0xE5, 0xFE, 0xC3, 0x94,
- 0x20, 0x50, 0x06, 0x12, 0x0E, 0xA2, 0x43, 0xF9,
-/*1D10*/0x08, 0xE5, 0xF2, 0x30, 0xE7, 0x03, 0x53, 0xF9,
- 0x7F, 0xE5, 0xF1, 0x54, 0x70, 0xD3, 0x94, 0x00,
-/*1D20*/0x50, 0xD8, 0x22, 0x12, 0x0E, 0x04, 0x75, 0x83,
- 0x80, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0x12,
-/*1D30*/0x0D, 0xFD, 0x75, 0x83, 0x84, 0x12, 0x0E, 0x02,
- 0x75, 0x83, 0x86, 0x12, 0x0E, 0x02, 0x75, 0x83,
-/*1D40*/0x8C, 0xE0, 0x54, 0xF3, 0x12, 0x0E, 0x03, 0x75,
- 0x83, 0x8E, 0x12, 0x0E, 0x02, 0x75, 0x83, 0x94,
-/*1D50*/0xE0, 0x54, 0xFB, 0xF0, 0x22, 0x12, 0x07, 0x2A,
- 0x75, 0x83, 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74,
-/*1D60*/0x01, 0x12, 0x07, 0x29, 0xE4, 0x12, 0x08, 0xBE,
- 0x75, 0x83, 0x8C, 0xE0, 0x44, 0x20, 0x12, 0x08,
-/*1D70*/0xBE, 0xE0, 0x54, 0xDF, 0xF0, 0x74, 0x84, 0x85,
- 0x08, 0x82, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0xF0,
-/*1D80*/0xE0, 0x44, 0x80, 0xF0, 0x22, 0x75, 0x56, 0x01,
- 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE, 0xFC,
-/*1D90*/0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12, 0x1E,
- 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E, 0x00,
-/*1DA0*/0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
- 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0x75, 0x56,
-/*1DB0*/0x01, 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE,
- 0xFC, 0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12,
-/*1DC0*/0x1E, 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E,
- 0x00, 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44,
-/*1DD0*/0xAF, 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xE4,
- 0xF5, 0x16, 0x12, 0x0E, 0x44, 0xFE, 0xE5, 0x08,
-/*1DE0*/0x44, 0x05, 0xFF, 0x12, 0x0E, 0x65, 0x8F, 0x82,
- 0x8E, 0x83, 0xF0, 0x05, 0x16, 0xE5, 0x16, 0xC3,
-/*1DF0*/0x94, 0x14, 0x40, 0xE6, 0xE5, 0x08, 0x12, 0x0E,
- 0x2B, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
-/*1E00*/0x59, 0xF5, 0x5A, 0xFF, 0xFE, 0xAD, 0x58, 0xFC,
- 0x12, 0x09, 0x15, 0x7F, 0x04, 0x7E, 0x00, 0xAD,
-/*1E10*/0x58, 0x7C, 0x00, 0x12, 0x09, 0x15, 0x7F, 0x02,
- 0x7E, 0x00, 0xAD, 0x58, 0x7C, 0x00, 0x02, 0x09,
-/*1E20*/0x15, 0xE5, 0x3C, 0x25, 0x3E, 0xFC, 0xE5, 0x42,
- 0x24, 0x00, 0xFB, 0xE4, 0x33, 0xFA, 0xEC, 0xC3,
-/*1E30*/0x9B, 0xEA, 0x12, 0x07, 0x6B, 0x40, 0x0B, 0x8C,
- 0x42, 0xE5, 0x3D, 0x25, 0x3F, 0xF5, 0x41, 0x8F,
-/*1E40*/0x40, 0x22, 0x12, 0x09, 0x0B, 0x22, 0x74, 0x84,
- 0xF5, 0x18, 0x85, 0x08, 0x19, 0x85, 0x19, 0x82,
-/*1E50*/0x85, 0x18, 0x83, 0xE0, 0x54, 0x7F, 0xF0, 0xE0,
- 0x44, 0x80, 0xF0, 0xE0, 0x44, 0x80, 0xF0, 0x22,
-/*1E60*/0xEF, 0x4E, 0x70, 0x0B, 0x12, 0x07, 0x2A, 0x75,
- 0x83, 0xD2, 0xE0, 0x54, 0xDF, 0xF0, 0x22, 0x12,
-/*1E70*/0x07, 0x2A, 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x20,
- 0xF0, 0x22, 0x75, 0x58, 0x01, 0x90, 0x07, 0x26,
-/*1E80*/0x12, 0x07, 0x35, 0xE0, 0x54, 0x3F, 0xF5, 0x41,
- 0x12, 0x07, 0x32, 0xE0, 0x54, 0x3F, 0xF5, 0x40,
-/*1E90*/0x22, 0x75, 0x56, 0x02, 0xE4, 0xF5, 0x57, 0x12,
- 0x1D, 0xFC, 0xAF, 0x57, 0x7E, 0x00, 0xAD, 0x56,
-/*1EA0*/0x7C, 0x00, 0x02, 0x04, 0x44, 0xE4, 0xF5, 0x42,
- 0xF5, 0x41, 0xF5, 0x40, 0xF5, 0x38, 0xF5, 0x39,
-/*1EB0*/0xF5, 0x3A, 0x22, 0xEF, 0x54, 0x07, 0xFF, 0xE5,
- 0xF9, 0x54, 0xF8, 0x4F, 0xF5, 0xF9, 0x22, 0x7F,
-/*1EC0*/0x01, 0xE4, 0xFE, 0x0F, 0x0E, 0xBE, 0xFF, 0xFB,
- 0x22, 0x01, 0x20, 0x00, 0x01, 0x04, 0x20, 0x00,
-/*1ED0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1EF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F00*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F10*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F20*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F30*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F40*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F50*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F60*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F70*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F80*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1F90*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FA0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FB0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FC0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FD0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-/*1FF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x81
-};
-
-int ipath_sd7220_ib_load(struct ipath_devdata *dd)
-{
- return ipath_sd7220_prog_ld(dd, IB_7220_SERDES, ipath_sd7220_ib_img,
- sizeof(ipath_sd7220_ib_img), 0);
-}
-
-int ipath_sd7220_ib_vfy(struct ipath_devdata *dd)
-{
- return ipath_sd7220_prog_vfy(dd, IB_7220_SERDES, ipath_sd7220_ib_img,
- sizeof(ipath_sd7220_ib_img), 0);
-}
git.openpandora.org / pandora-kernel.git / commitdiff