sky2: rename BMU register

This register is more of a test and control register on Yukon2.
So rename it to Q_TEST and give some bit definitions.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 0bd74fe..5b3a866 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1140,7 +1140,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
        if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
            (hw->chip_rev == CHIP_REV_YU_EC_U_A1
             || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
-               sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
+               sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
 
        sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
 

diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 3caeddf..00907f5 100644 (file)
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -592,23 +592,15 @@ enum {
 enum {
        B8_Q_REGS = 0x0400, /* base of Queue registers */
        Q_D     = 0x00, /* 8*32 bit     Current Descriptor */
-       Q_DA_L  = 0x20, /* 32 bit       Current Descriptor Address Low dWord */
-       Q_DA_H  = 0x24, /* 32 bit       Current Descriptor Address High dWord */
+       Q_VLAN  = 0x20, /* 16 bit       Current VLAN Tag */
+       Q_DONE  = 0x24, /* 16 bit       Done Index */
        Q_AC_L  = 0x28, /* 32 bit       Current Address Counter Low dWord */
        Q_AC_H  = 0x2c, /* 32 bit       Current Address Counter High dWord */
        Q_BC    = 0x30, /* 32 bit       Current Byte Counter */
        Q_CSR   = 0x34, /* 32 bit       BMU Control/Status Register */
-       Q_F     = 0x38, /* 32 bit       Flag Register */
-       Q_T1    = 0x3c, /* 32 bit       Test Register 1 */
-       Q_T1_TR = 0x3c, /*  8 bit       Test Register 1 Transfer SM */
-       Q_T1_WR = 0x3d, /*  8 bit       Test Register 1 Write Descriptor SM */
-       Q_T1_RD = 0x3e, /*  8 bit       Test Register 1 Read Descriptor SM */
-       Q_T1_SV = 0x3f, /*  8 bit       Test Register 1 Supervisor SM */
-       Q_T2    = 0x40, /* 32 bit       Test Register 2 */
-       Q_T3    = 0x44, /* 32 bit       Test Register 3 */
+       Q_TEST  = 0x38, /* 32 bit       Test/Control Register */
 
 /* Yukon-2 */
-       Q_DONE  = 0x24, /* 16 bit       Done Index              (Yukon-2 only) */
        Q_WM    = 0x40, /* 16 bit       FIFO Watermark */
        Q_AL    = 0x42, /*  8 bit       FIFO Alignment */
        Q_RSP   = 0x44, /* 16 bit       FIFO Read Shadow Pointer */
@@ -622,15 +614,16 @@ enum {
 };
 #define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
 
-/*     Q_F                             32 bit  Flag Register */
+/*     Q_TEST                          32 bit  Test Register */
 enum {
-       F_ALM_FULL      = 1<<27, /* Rx FIFO: almost full */
-       F_EMPTY         = 1<<27, /* Tx FIFO: empty flag */
-       F_FIFO_EOF      = 1<<26, /* Tag (EOF Flag) bit in FIFO */
-       F_WM_REACHED    = 1<<25, /* Watermark reached */
+       /* Transmit */
+       F_TX_CHK_AUTO_OFF = 1<<31, /* Tx checksum auto calc off (Yukon EX) */
+       F_TX_CHK_AUTO_ON  = 1<<30, /* Tx checksum auto calc off (Yukon EX) */
+
+       /* Receive */
        F_M_RX_RAM_DIS  = 1<<24, /* MAC Rx RAM Read Port disable */
-       F_FIFO_LEVEL    = 0x1fL<<16, /* Bit 23..16:     # of Qwords in FIFO */
-       F_WATER_MARK    = 0x0007ffL, /* Bit 10.. 0:     Watermark */
+
+       /* Hardware testbits not used */
 };
 
 /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/