sh: Add LCDC Panel support for EcoVec24

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 55ff735..428d118 100644 (file)
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -219,7 +219,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
                .interface_type = RGB18,
                .chan = LCDC_CHAN_MAINLCD,
                .bpp = 16,
-               .clock_divider = 1,
                .lcd_cfg = {
                        .sync = 0, /* hsync and vsync are active low */
                },
@@ -337,6 +336,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
 };
 
 #define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
 static int __init devices_setup(void)
 {
        /* enable SCIFA0 */
@@ -422,9 +422,13 @@ static int __init devices_setup(void)
        gpio_direction_output(GPIO_PTR1, 0);
        gpio_direction_output(GPIO_PTA2, 0);
 
+       /* I/O buffer drive ability is low */
+       ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+
        if (gpio_get_value(GPIO_PTE6)) {
                /* DVI */
                lcdc_info.clock_source                  = LCDC_CLK_EXTERNAL;
+               lcdc_info.ch[0].clock_divider           = 1,
                lcdc_info.ch[0].lcd_cfg.name            = "DVI";
                lcdc_info.ch[0].lcd_cfg.xres            = 1280;
                lcdc_info.ch[0].lcd_cfg.yres            = 720;
@@ -439,7 +443,29 @@ static int __init devices_setup(void)
                gpio_set_value(GPIO_PTU1, 1);
        } else {
                /* Panel */
-               /* not supported */
+
+               lcdc_info.clock_source                  = LCDC_CLK_PERIPHERAL;
+               lcdc_info.ch[0].clock_divider           = 2,
+               lcdc_info.ch[0].lcd_cfg.name            = "Panel";
+               lcdc_info.ch[0].lcd_cfg.xres            = 800;
+               lcdc_info.ch[0].lcd_cfg.yres            = 480;
+               lcdc_info.ch[0].lcd_cfg.left_margin     = 220;
+               lcdc_info.ch[0].lcd_cfg.right_margin    = 110;
+               lcdc_info.ch[0].lcd_cfg.hsync_len       = 70;
+               lcdc_info.ch[0].lcd_cfg.upper_margin    = 20;
+               lcdc_info.ch[0].lcd_cfg.lower_margin    = 5;
+               lcdc_info.ch[0].lcd_cfg.vsync_len       = 5;
+
+               gpio_set_value(GPIO_PTR1, 1);
+
+               /* FIXME
+                *
+                * LCDDON control is needed for Panel,
+                * but current sh_mobile_lcdc driver doesn't control it.
+                * It is temporary correspondence
+                */
+               gpio_request(GPIO_PTF4, NULL);
+               gpio_direction_output(GPIO_PTF4, 1);
        }
 
        /* enable CEU0 */