#
CONFIG_ARCH_IQ80321=y
CONFIG_ARCH_IQ31244=y
+CONFIG_MACH_N2100=y
CONFIG_PLAT_IOP=y
#
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
#
# USB Gadget Support
#
--- /dev/null
+/*
+ * arch/arm/mach-iop32x/n2100.c
+ *
+ * Board support code for the Thecus N2100 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * N2100 timer tick configuration.
+ */
+static void __init n2100_timer_init(void)
+{
+ /* 33.000 MHz crystal. */
+ iop3xx_init_time(198000000);
+}
+
+static struct sys_timer n2100_timer = {
+ .init = n2100_timer_init,
+ .offset = iop3xx_gettimeoffset,
+};
+
+
+/*
+ * N2100 I/O.
+ */
+static struct map_desc n2100_io_desc[] __initdata = {
+ { /* on-board devices */
+ .virtual = N2100_UART,
+ .pfn = __phys_to_pfn(N2100_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
+};
+
+void __init n2100_map_io(void)
+{
+ iop3xx_map_io();
+ iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
+}
+
+
+/*
+ * N2100 PCI.
+ */
+static inline int __init
+n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ if (PCI_SLOT(dev->devfn) == 1) {
+ /* RTL8110SB #1 */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (PCI_SLOT(dev->devfn) == 2) {
+ /* RTL8110SB #2 */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (PCI_SLOT(dev->devfn) == 3) {
+ /* Sil3512 */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
+ /* VT6212 INTA */
+ irq = IRQ_IOP32X_XINT1;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
+ /* VT6212 INTB */
+ irq = IRQ_IOP32X_XINT0;
+ } else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
+ /* VT6212 INTC */
+ irq = IRQ_IOP32X_XINT2;
+ } else if (PCI_SLOT(dev->devfn) == 5) {
+ /* Mini-PCI slot */
+ irq = IRQ_IOP32X_XINT3;
+ } else {
+ printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
+ "device PCI:%d:%d:%d\n", dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+ irq = -1;
+ }
+
+ return irq;
+}
+
+static struct hw_pci n2100_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .nr_controllers = 1,
+ .setup = iop3xx_pci_setup,
+ .preinit = iop3xx_pci_preinit,
+ .scan = iop3xx_pci_scan_bus,
+ .map_irq = n2100_pci_map_irq,
+};
+
+static int __init n2100_pci_init(void)
+{
+ if (machine_is_n2100())
+ pci_common_init(&n2100_pci);
+
+ return 0;
+}
+
+subsys_initcall(n2100_pci_init);
+
+
+/*
+ * N2100 machine initialisation.
+ */
+static struct physmap_flash_data n2100_flash_data = {
+ .width = 2,
+};
+
+static struct resource n2100_flash_resource = {
+ .start = 0xf0000000,
+ .end = 0xf0ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &n2100_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &n2100_flash_resource,
+};
+
+
+static struct plat_serial8250_port n2100_serial_port[] = {
+ {
+ .mapbase = N2100_UART,
+ .membase = (char *)N2100_UART,
+ .irq = 0,
+ .flags = UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 0,
+ .uartclk = 1843200,
+ },
+ { },
+};
+
+static struct resource n2100_uart_resource = {
+ .start = N2100_UART,
+ .end = N2100_UART + 7,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device n2100_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = n2100_serial_port,
+ },
+ .num_resources = 1,
+ .resource = &n2100_uart_resource,
+};
+
+
+/*
+ * Pull PCA9532 GPIO #8 low to power off the machine.
+ */
+static void n2100_power_off(void)
+{
+ local_irq_disable();
+
+ /* Start condition, I2C address of PCA9532, write transaction. */
+ *IOP3XX_IDBR0 = 0xc0;
+ *IOP3XX_ICR0 = 0xe9;
+ mdelay(1);
+
+ /* Write address 0x08. */
+ *IOP3XX_IDBR0 = 0x08;
+ *IOP3XX_ICR0 = 0xe8;
+ mdelay(1);
+
+ /* Write data 0x01, stop condition. */
+ *IOP3XX_IDBR0 = 0x01;
+ *IOP3XX_ICR0 = 0xea;
+
+ while (1)
+ ;
+}
+
+
+static struct timer_list power_button_poll_timer;
+
+static void power_button_poll(unsigned long dummy)
+{
+ if (gpio_line_get(N2100_POWER_BUTTON) == 0) {
+ ctrl_alt_del();
+ return;
+ }
+
+ power_button_poll_timer.expires = jiffies + (HZ / 10);
+ add_timer(&power_button_poll_timer);
+}
+
+
+static void __init n2100_init_machine(void)
+{
+ platform_device_register(&iop3xx_i2c0_device);
+ platform_device_register(&n2100_flash_device);
+ platform_device_register(&n2100_serial_device);
+
+ pm_power_off = n2100_power_off;
+
+ init_timer(&power_button_poll_timer);
+ power_button_poll_timer.function = power_button_poll;
+ power_button_poll_timer.expires = jiffies + (HZ / 10);
+ add_timer(&power_button_poll_timer);
+}
+
+MACHINE_START(N2100, "Thecus N2100")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = N2100_UART,
+ .io_pg_offst = ((N2100_UART) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = n2100_map_io,
+ .init_irq = iop32x_init_irq,
+ .timer = &n2100_timer,
+ .init_machine = n2100_init_machine,
+MACHINE_END
git.openpandora.org / pandora-kernel.git / commitdiff