F: drivers/media/video/gspca/pac207.c
GSPCA SN9C20X SUBDRIVER
-P: Brian Johnson
-M: brijohn@gmail.com
+M: Brian Johnson <brijohn@gmail.com>
L: linux-media@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
static int __init dma_init(void)
{
- dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+ return 0;
}
fs_initcall(dma_init);
GLOBAL_ENTRY(csum_ipv6_magic)
ld4 r20=[in0],4
ld4 r21=[in1],4
- dep r15=in3,in2,32,16
+ zxt4 in2=in2
;;
ld4 r22=[in0],4
ld4 r23=[in1],4
- mux1 r15=r15,@rev
+ dep r15=in3,in2,32,16
;;
ld4 r24=[in0],4
ld4 r25=[in1],4
- shr.u r15=r15,16
+ mux1 r15=r15,@rev
add r16=r20,r21
add r17=r22,r23
+ zxt4 in4=in4
;;
ld4 r26=[in0],4
ld4 r27=[in1],4
+ shr.u r15=r15,16
add r18=r24,r25
add r8=r16,r17
;;
*/
static int power7_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
- [C(OP_READ)] = { 0x400f0, 0xc880 },
+ [C(OP_READ)] = { 0xc880, 0x400f0 },
[C(OP_WRITE)] = { 0, 0x300f0 },
[C(OP_PREFETCH)] = { 0xd8b8, 0 },
},
[C(OP_PREFETCH)] = { 0x408a, 0 },
},
[C(LL)] = { /* RESULT_ACCESS RESULT_MISS */
- [C(OP_READ)] = { 0x6080, 0x6084 },
- [C(OP_WRITE)] = { 0x6082, 0x6086 },
+ [C(OP_READ)] = { 0x16080, 0x26080 },
+ [C(OP_WRITE)] = { 0x16082, 0x26082 },
[C(OP_PREFETCH)] = { 0, 0 },
},
[C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */
* Therefore you cannot make any OBP calls, not even prom_printf,
* from these two routines.
*/
-static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
+static void __cpuinit notrace register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask)
{
unsigned long num_entries = (qmask + 1) / 64;
unsigned long status;
}
if (!touched && __get_cpu_var(last_irq_sum) == sum) {
local_inc(&__get_cpu_var(alert_counter));
- if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+ if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz)
die_nmi("BUG: NMI Watchdog detected LOCKUP",
regs, panic_on_timeout);
} else {
/* Drop into the prom, but completely terminate the program.
* No chance of continuing.
*/
-void prom_halt(void)
+void notrace prom_halt(void)
{
#ifdef CONFIG_SUN_LDOMS
if (ldom_domaining_enabled)
*/
#include <linux/kernel.h>
+#include <linux/compiler.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
static char ppbuf[1024];
-void
-prom_write(const char *buf, unsigned int n)
+void notrace prom_write(const char *buf, unsigned int n)
{
char ch;
}
}
-void
-prom_printf(const char *fmt, ...)
+void notrace prom_printf(const char *fmt, ...)
{
va_list args;
int i;
}
EXPORT_SYMBOL_GPL(crypto_enqueue_request);
-struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset)
{
struct list_head *request;
request = queue->list.next;
list_del(request);
- return list_entry(request, struct crypto_async_request, list);
+ return (char *)list_entry(request, struct crypto_async_request, list) -
+ offset;
+}
+EXPORT_SYMBOL_GPL(__crypto_dequeue_request);
+
+struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue)
+{
+ return __crypto_dequeue_request(queue, 0);
}
EXPORT_SYMBOL_GPL(crypto_dequeue_request);
return ata_sff_prereset(link, deadline);
}
+static DEFINE_SPINLOCK(piix_lock);
+
/**
* piix_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
+ unsigned int pio = adev->pio_mode - XFER_PIO_0;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ spin_lock_irqsave(&piix_lock, flags);
+
/* PIO configuration clears DTE unconditionally. It will be
* programmed in set_dmamode which is guaranteed to be called
* after set_piomode if any DMA mode is available.
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);
}
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, int isich)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
{ 2, 1 },
{ 2, 3 }, };
+ spin_lock_irqsave(&piix_lock, flags);
+
pci_read_config_word(dev, master_port, &master_data);
if (ap->udma_mask)
pci_read_config_byte(dev, 0x48, &udma_enable);
/* Don't scribble on 0x48 if the controller does not support UDMA */
if (ap->udma_mask)
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&piix_lock, flags);
}
/**
if (space < 2)
return -1;
tty->canon_column = tty->column = 0;
- tty_put_char(tty, '\r');
- tty_put_char(tty, c);
+ tty->ops->write(tty, "\r\n", 2);
return 2;
}
tty->canon_column = tty->column;
* the other side of the pty/tty pair.
*/
-static int pty_write(struct tty_struct *tty, const unsigned char *buf,
- int count)
+static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
{
struct tty_struct *to = tty->link;
- int c;
if (tty->stopped)
return 0;
- /* This isn't locked but our 8K is quite sloppy so no
- big deal */
-
- c = pty_space(to);
- if (c > count)
- c = count;
if (c > 0) {
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to, buf, c);
{
int ret = 0;
-#ifdef __powerpc__
int cpu = sysdev->id;
- unsigned int cur_freq = 0;
struct cpufreq_policy *cpu_policy;
dprintk("suspending cpu %u\n", cpu);
- /*
- * This whole bogosity is here because Powerbooks are made of fail.
- * No sane platform should need any of the code below to be run.
- * (it's entirely the wrong thing to do, as driver->get may
- * reenable interrupts on some architectures).
- */
-
if (!cpu_online(cpu))
return 0;
if (cpufreq_driver->suspend) {
ret = cpufreq_driver->suspend(cpu_policy, pmsg);
- if (ret) {
+ if (ret)
printk(KERN_ERR "cpufreq: suspend failed in ->suspend "
"step on CPU %u\n", cpu_policy->cpu);
- goto out;
- }
- }
-
- if (cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)
- goto out;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: suspend failed to assert current "
- "frequency is what timing core thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency is %u, "
- "cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
- CPUFREQ_SUSPENDCHANGE, &freqs);
- adjust_jiffies(CPUFREQ_SUSPENDCHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
}
out:
cpufreq_cpu_put(cpu_policy);
-#endif /* __powerpc__ */
return ret;
}
* cpufreq_resume - restore proper CPU frequency handling after resume
*
* 1.) resume CPUfreq hardware support (cpufreq_driver->resume())
- * 2.) if ->target and !CPUFREQ_CONST_LOOPS: verify we're in sync
- * 3.) schedule call cpufreq_update_policy() ASAP as interrupts are
- * restored.
+ * 2.) schedule call cpufreq_update_policy() ASAP as interrupts are
+ * restored. It will verify that the current freq is in sync with
+ * what we believe it to be. This is a bit later than when it
+ * should be, but nonethteless it's better than calling
+ * cpufreq_driver->get() here which might re-enable interrupts...
*/
static int cpufreq_resume(struct sys_device *sysdev)
{
int ret = 0;
-#ifdef __powerpc__
int cpu = sysdev->id;
struct cpufreq_policy *cpu_policy;
dprintk("resuming cpu %u\n", cpu);
- /* As with the ->suspend method, all the code below is
- * only necessary because Powerbooks suck.
- * See commit 42d4dc3f4e1e for jokes. */
-
if (!cpu_online(cpu))
return 0;
}
}
- if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
- unsigned int cur_freq = 0;
-
- if (cpufreq_driver->get)
- cur_freq = cpufreq_driver->get(cpu_policy->cpu);
-
- if (!cur_freq || !cpu_policy->cur) {
- printk(KERN_ERR "cpufreq: resume failed to assert "
- "current frequency is what timing core "
- "thinks it is.\n");
- goto out;
- }
-
- if (unlikely(cur_freq != cpu_policy->cur)) {
- struct cpufreq_freqs freqs;
-
- if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN))
- dprintk("Warning: CPU frequency "
- "is %u, cpufreq assumed %u kHz.\n",
- cur_freq, cpu_policy->cur);
-
- freqs.cpu = cpu;
- freqs.old = cpu_policy->cur;
- freqs.new = cur_freq;
-
- srcu_notifier_call_chain(
- &cpufreq_transition_notifier_list,
- CPUFREQ_RESUMECHANGE, &freqs);
- adjust_jiffies(CPUFREQ_RESUMECHANGE, &freqs);
-
- cpu_policy->cur = cur_freq;
- }
- }
-
-out:
schedule_work(&cpu_policy->update);
+
fail:
cpufreq_cpu_put(cpu_policy);
-#endif /* __powerpc__ */
return ret;
}
unsigned int edp_support:1;
int lvds_ssc_freq;
+ int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
*/
struct list_head inactive_list;
+ /** LRU list of objects with fence regs on them. */
+ struct list_head fence_list;
+
/**
* List of breadcrumbs associated with GPU requests currently
* outstanding.
/** This object's place on the active/flushing/inactive lists */
struct list_head list;
+ /** This object's place on the fenced object LRU */
+ struct list_head fence_list;
+
/**
* This is set if the object is on the active or flushing lists
* (has pending rendering), and is not set if it's on inactive (ready
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_set_domain *args = data;
struct drm_gem_object *obj;
uint32_t read_domains = args->read_domains;
obj, obj->size, read_domains, write_domain);
#endif
if (read_domains & I915_GEM_DOMAIN_GTT) {
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+ /* Update the LRU on the fence for the CPU access that's
+ * about to occur.
+ */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list,
+ &dev_priv->mm.fence_list);
+ }
+
/* Silently promote "you're not bound, there was nothing to do"
* to success, since the client was just asking us to
* make sure everything was done.
}
/* Need a new fence register? */
- if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret) {
mutex_unlock(&dev->struct_mutex);
struct drm_i915_gem_object *old_obj_priv = NULL;
int i, ret, avail;
+ /* Just update our place in the LRU if our fence is getting used. */
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE) {
+ list_move_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+ return 0;
+ }
+
switch (obj_priv->tiling_mode) {
case I915_TILING_NONE:
WARN(1, "allocating a fence for non-tiled object?\n");
}
/* First try to find a free reg */
-try_again:
avail = 0;
for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
reg = &dev_priv->fence_regs[i];
/* None available, try to steal one or wait for a user to finish */
if (i == dev_priv->num_fence_regs) {
- uint32_t seqno = dev_priv->mm.next_gem_seqno;
+ struct drm_gem_object *old_obj = NULL;
if (avail == 0)
return -ENOSPC;
- for (i = dev_priv->fence_reg_start;
- i < dev_priv->num_fence_regs; i++) {
- uint32_t this_seqno;
+ list_for_each_entry(old_obj_priv, &dev_priv->mm.fence_list,
+ fence_list) {
+ old_obj = old_obj_priv->obj;
- reg = &dev_priv->fence_regs[i];
- old_obj_priv = reg->obj->driver_private;
+ reg = &dev_priv->fence_regs[old_obj_priv->fence_reg];
if (old_obj_priv->pin_count)
continue;
+ /* Take a reference, as otherwise the wait_rendering
+ * below may cause the object to get freed out from
+ * under us.
+ */
+ drm_gem_object_reference(old_obj);
+
/* i915 uses fences for GPU access to tiled buffers */
if (IS_I965G(dev) || !old_obj_priv->active)
break;
- /* find the seqno of the first available fence */
- this_seqno = old_obj_priv->last_rendering_seqno;
- if (this_seqno != 0 &&
- reg->obj->write_domain == 0 &&
- i915_seqno_passed(seqno, this_seqno))
- seqno = this_seqno;
- }
-
- /*
- * Now things get ugly... we have to wait for one of the
- * objects to finish before trying again.
- */
- if (i == dev_priv->num_fence_regs) {
- if (seqno == dev_priv->mm.next_gem_seqno) {
- i915_gem_flush(dev,
- I915_GEM_GPU_DOMAINS,
- I915_GEM_GPU_DOMAINS);
- seqno = i915_add_request(dev, NULL,
- I915_GEM_GPU_DOMAINS);
- if (seqno == 0)
- return -ENOMEM;
- }
-
- ret = i915_wait_request(dev, seqno);
- if (ret)
+ /* This brings the object to the head of the LRU if it
+ * had been written to. The only way this should
+ * result in us waiting longer than the expected
+ * optimal amount of time is if there was a
+ * fence-using buffer later that was read-only.
+ */
+ i915_gem_object_flush_gpu_write_domain(old_obj);
+ ret = i915_gem_object_wait_rendering(old_obj);
+ if (ret != 0)
return ret;
- goto try_again;
+ break;
}
/*
* for this object next time we need it.
*/
i915_gem_release_mmap(reg->obj);
+ i = old_obj_priv->fence_reg;
old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&old_obj_priv->fence_list);
+ drm_gem_object_unreference(old_obj);
}
obj_priv->fence_reg = i;
+ list_add_tail(&obj_priv->fence_list, &dev_priv->mm.fence_list);
+
reg->obj = obj;
if (IS_I965G(dev))
dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
+ list_del_init(&obj_priv->fence_list);
}
/**
* Pre-965 chips need a fence register set up in order to
* properly handle tiled surfaces.
*/
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
- obj_priv->tiling_mode != I915_TILING_NONE) {
+ if (!IS_I965G(dev) && obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
if (ret != -EBUSY && ret != -ERESTARTSYS)
obj_priv->obj = obj;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj_priv->list);
+ INIT_LIST_HEAD(&obj_priv->fence_list);
return 0;
}
INIT_LIST_HEAD(&dev_priv->mm.flushing_list);
INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
INIT_LIST_HEAD(&dev_priv->mm.request_list);
+ INIT_LIST_HEAD(&dev_priv->mm.fence_list);
INIT_DELAYED_WORK(&dev_priv->mm.retire_work,
i915_gem_retire_work_handler);
dev_priv->mm.next_gem_seqno = 1;
return NULL;
}
+static u16
+get_blocksize(void *p)
+{
+ u16 *block_ptr, block_size;
+
+ block_ptr = (u16 *)((char *)p - 2);
+ block_size = *block_ptr;
+ return block_size;
+}
+
static void
fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
struct lvds_dvo_timing *dvo_timing)
}
}
+static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct bdb_general_definitions *general;
+ const int crt_bus_map_table[] = {
+ GPIOB,
+ GPIOA,
+ GPIOC,
+ GPIOD,
+ GPIOE,
+ GPIOF,
+ };
+
+ /* Set sensible defaults in case we can't find the general block
+ or it is the wrong chipset */
+ dev_priv->crt_ddc_bus = -1;
+
+ general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+ if (general) {
+ u16 block_size = get_blocksize(general);
+ if (block_size >= sizeof(*general)) {
+ int bus_pin = general->crt_ddc_gmbus_pin;
+ DRM_DEBUG("crt_ddc_bus_pin: %d\n", bus_pin);
+ if ((bus_pin >= 1) && (bus_pin <= 6)) {
+ dev_priv->crt_ddc_bus =
+ crt_bus_map_table[bus_pin-1];
+ }
+ } else {
+ DRM_DEBUG("BDB_GD too small (%d). Invalid.\n",
+ block_size);
+ }
+ }
+}
+
static void
parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
struct bdb_header *bdb)
struct bdb_general_definitions *p_defs;
struct child_device_config *p_child;
int i, child_device_num, count;
- u16 block_size, *block_ptr;
+ u16 block_size;
p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
if (!p_defs) {
return;
}
/* get the block size of general definitions */
- block_ptr = (u16 *)((char *)p_defs - 2);
- block_size = *block_ptr;
+ block_size = get_blocksize(p_defs);
/* get the number of child device */
child_device_num = (block_size - sizeof(*p_defs)) /
sizeof(*p_child);
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
+ parse_general_definitions(dev_priv, bdb);
parse_lfp_panel_data(dev_priv, bdb);
parse_sdvo_panel_data(dev_priv, bdb);
parse_sdvo_device_mapping(dev_priv, bdb);
{
struct drm_connector *connector;
struct intel_output *intel_output;
+ struct drm_i915_private *dev_priv = dev->dev_private;
u32 i2c_reg;
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
/* Set up the DDC bus. */
if (IS_IGDNG(dev))
i2c_reg = PCH_GPIOA;
- else
+ else {
i2c_reg = GPIOA;
+ /* Use VBT information for CRT DDC if available */
+ if (dev_priv->crt_ddc_bus != -1)
+ i2c_reg = dev_priv->crt_ddc_bus;
+ }
intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
}
intel_output->type = INTEL_OUTPUT_ANALOG;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
intel_clock_t clock;
int err = target;
- if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
(I915_READ(LVDS)) != 0) {
/*
* For LVDS, if the panel is on, just rely on its current
if (is_sdvo) {
dpll |= DPLL_DVO_HIGH_SPEED;
sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- if (IS_I945G(dev) || IS_I945GM(dev))
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
else if (IS_IGDNG(dev))
dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
- if (type_mask & (1 << intel_output->type))
+ if (type_mask & intel_output->clone_mask)
index_mask |= (1 << entry);
entry++;
}
intel_dp_init(dev, PCH_DP_D);
} else if (IS_I9XX(dev)) {
- int found;
- u32 reg;
+ bool found = false;
if (I915_READ(SDVOB) & SDVO_DETECTED) {
found = intel_sdvo_init(dev, SDVOB);
if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOB);
+
if (!found && SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_B);
}
/* Before G4X SDVOC doesn't have its own detect register */
- if (IS_G4X(dev))
- reg = SDVOC;
- else
- reg = SDVOB;
- if (I915_READ(reg) & SDVO_DETECTED) {
+ if (I915_READ(SDVOB) & SDVO_DETECTED)
found = intel_sdvo_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
+
+ if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+ if (SUPPORTS_INTEGRATED_HDMI(dev))
intel_hdmi_init(dev, SDVOC);
- if (!found && SUPPORTS_INTEGRATED_DP(dev))
+ if (SUPPORTS_INTEGRATED_DP(dev))
intel_dp_init(dev, DP_C);
}
+
if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev, DP_D);
} else
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct intel_output *intel_output = to_intel_output(connector);
struct drm_encoder *encoder = &intel_output->enc;
- int crtc_mask = 0, clone_mask = 0;
- /* valid crtcs */
- switch(intel_output->type) {
- case INTEL_OUTPUT_HDMI:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_HDMI));
- break;
- case INTEL_OUTPUT_DVO:
- case INTEL_OUTPUT_SDVO:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_ANALOG:
- crtc_mask = ((1 << 0)|
- (1 << 1));
- clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
- (1 << INTEL_OUTPUT_DVO) |
- (1 << INTEL_OUTPUT_SDVO));
- break;
- case INTEL_OUTPUT_LVDS:
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_LVDS);
- break;
- case INTEL_OUTPUT_TVOUT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_TVOUT);
- break;
- case INTEL_OUTPUT_DISPLAYPORT:
- crtc_mask = ((1 << 0) |
- (1 << 1));
- clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
- break;
- case INTEL_OUTPUT_EDP:
- crtc_mask = (1 << 1);
- clone_mask = (1 << INTEL_OUTPUT_EDP);
- break;
- }
- encoder->possible_crtcs = crtc_mask;
- encoder->possible_clones = intel_connector_clones(dev, clone_mask);
+ encoder->possible_crtcs = intel_output->crtc_mask;
+ encoder->possible_clones = intel_connector_clones(dev,
+ intel_output->clone_mask);
}
}
else
intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+ if (output_reg == DP_B)
+ intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+ else if (output_reg == DP_C)
+ intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+ else if (output_reg == DP_D)
+ intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+
+ if (IS_eDP(intel_output)) {
+ intel_output->crtc_mask = (1 << 1);
+ intel_output->clone_mask = (1 << INTEL_OUTPUT_EDP);
+ } else
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
#define INTEL_OUTPUT_DISPLAYPORT 7
#define INTEL_OUTPUT_EDP 8
+/* Intel Pipe Clone Bit */
+#define INTEL_HDMIB_CLONE_BIT 1
+#define INTEL_HDMIC_CLONE_BIT 2
+#define INTEL_HDMID_CLONE_BIT 3
+#define INTEL_HDMIE_CLONE_BIT 4
+#define INTEL_HDMIF_CLONE_BIT 5
+#define INTEL_SDVO_NON_TV_CLONE_BIT 6
+#define INTEL_SDVO_TV_CLONE_BIT 7
+#define INTEL_SDVO_LVDS_CLONE_BIT 8
+#define INTEL_ANALOG_CLONE_BIT 9
+#define INTEL_TV_CLONE_BIT 10
+#define INTEL_DP_B_CLONE_BIT 11
+#define INTEL_DP_C_CLONE_BIT 12
+#define INTEL_DP_D_CLONE_BIT 13
+#define INTEL_LVDS_CLONE_BIT 14
+#define INTEL_DVO_TMDS_CLONE_BIT 15
+#define INTEL_DVO_LVDS_CLONE_BIT 16
+
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
bool needs_tv_clock;
void *dev_priv;
void (*hot_plug)(struct intel_output *);
+ int crtc_mask;
+ int clone_mask;
};
struct intel_crtc {
continue;
intel_output->type = INTEL_OUTPUT_DVO;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_TMDS_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_DVII);
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS:
+ intel_output->clone_mask =
+ (1 << INTEL_DVO_LVDS_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
/* Set up the DDC bus. */
- if (sdvox_reg == SDVOB)
+ if (sdvox_reg == SDVOB) {
+ intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
- else if (sdvox_reg == SDVOC)
+ } else if (sdvox_reg == SDVOC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
- else if (sdvox_reg == HDMIB)
+ } else if (sdvox_reg == HDMIB) {
+ intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
- else if (sdvox_reg == HDMIC)
+ } else if (sdvox_reg == HDMIC) {
+ intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
- else if (sdvox_reg == HDMID)
+ } else if (sdvox_reg == HDMID) {
+ intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
-
+ }
if (!intel_output->ddc_bus)
goto err_connector;
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
intel_output->type = INTEL_OUTPUT_LVDS;
+ intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 1);
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
(SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1))
caps++;
if (sdvo_priv->caps.output_flags &
- (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID0))
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_SVID1))
caps++;
if (sdvo_priv->caps.output_flags &
(SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_CVBS1))
intel_sdvo_set_colorimetry(intel_output,
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ intel_output->clone_mask =
+ (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
}
} else if (flags & SDVO_OUTPUT_SVID0) {
connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
sdvo_priv->is_tv = true;
intel_output->needs_tv_clock = true;
+ intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
} else if (flags & SDVO_OUTPUT_RGB0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_RGB1) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_LVDS1) {
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
+ intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else {
unsigned char bytes[2];
bytes[0], bytes[1]);
ret = false;
}
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
if (ret && registered)
ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
if (!intel_output) {
return;
}
+
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
tv_priv = (struct intel_tv_priv *)(intel_output + 1);
intel_output->type = INTEL_OUTPUT_TVOUT;
+ intel_output->clone_mask = (1 << INTEL_TV_CLONE_BIT);
intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
intel_output->dev_priv = tv_priv;
0xae, 0xb0, -1U
};
+/*
+ * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate
+ * release for their volume buttons
+ */
+static unsigned int atkbd_hp_r4000_forced_release_keys[] = {
+ 0xae, 0xb0, -1U
+};
+
/*
* Samsung NC10,NC20 with Fn+F? key release not working
*/
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_hp_zv6100_forced_release_keys,
},
+ {
+ .ident = "HP Presario R4000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
+ {
+ .ident = "HP Presario R4100",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
+ {
+ .ident = "HP Presario R4200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_r4000_forced_release_keys,
+ },
{
.ident = "Inventec Symphony",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
},
},
+ {
+ .ident = "Acer Aspire 5536",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+ },
+ },
{ }
};
*/
chunk_size_ulong = round_up(chunk_size_ulong, PAGE_SIZE >> 9);
+ return dm_exception_store_set_chunk_size(store, chunk_size_ulong,
+ error);
+}
+
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+ unsigned long chunk_size_ulong,
+ char **error)
+{
/* Check chunk_size is a power of 2 */
if (!is_power_of_2(chunk_size_ulong)) {
*error = "Chunk size is not a power of 2";
return -EINVAL;
}
+ if (chunk_size_ulong > INT_MAX >> SECTOR_SHIFT) {
+ *error = "Chunk size is too high";
+ return -EINVAL;
+ }
+
store->chunk_size = chunk_size_ulong;
store->chunk_mask = chunk_size_ulong - 1;
store->chunk_shift = ffs(chunk_size_ulong) - 1;
int dm_exception_store_type_register(struct dm_exception_store_type *type);
int dm_exception_store_type_unregister(struct dm_exception_store_type *type);
+int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
+ unsigned long chunk_size_ulong,
+ char **error);
+
int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
unsigned *args_used,
struct dm_exception_store **store);
struct dm_target *ti;
uint32_t region_size;
region_t region_count;
+ uint64_t luid;
char uuid[DM_UUID_LEN];
char *usr_argv_str;
* restored.
*/
retry:
- r = dm_consult_userspace(uuid, request_type, data,
+ r = dm_consult_userspace(uuid, lc->luid, request_type, data,
data_size, rdata, rdata_size);
if (r != -ESRCH)
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(2*HZ);
DMWARN("Attempting to contact userspace log server...");
- r = dm_consult_userspace(uuid, DM_ULOG_CTR, lc->usr_argv_str,
+ r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_CTR,
+ lc->usr_argv_str,
strlen(lc->usr_argv_str) + 1,
NULL, NULL);
if (!r)
break;
}
DMINFO("Reconnected to userspace log server... DM_ULOG_CTR complete");
- r = dm_consult_userspace(uuid, DM_ULOG_RESUME, NULL,
+ r = dm_consult_userspace(uuid, lc->luid, DM_ULOG_RESUME, NULL,
0, NULL, NULL);
if (!r)
goto retry;
return -ENOMEM;
}
- for (i = 0, str_size = 0; i < argc; i++)
- str_size += sprintf(str + str_size, "%s ", argv[i]);
- str_size += sprintf(str + str_size, "%llu",
- (unsigned long long)ti->len);
+ str_size = sprintf(str, "%llu", (unsigned long long)ti->len);
+ for (i = 0; i < argc; i++)
+ str_size += sprintf(str + str_size, " %s", argv[i]);
*ctr_str = str;
return str_size;
return -ENOMEM;
}
+ /* The ptr value is sufficient for local unique id */
+ lc->luid = (uint64_t)lc;
+
lc->ti = ti;
if (strlen(argv[0]) > (DM_UUID_LEN - 1)) {
}
/* Send table string */
- r = dm_consult_userspace(lc->uuid, DM_ULOG_CTR,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR,
ctr_str, str_size, NULL, NULL);
if (r == -ESRCH) {
/* Since the region size does not change, get it now */
rdata_size = sizeof(rdata);
- r = dm_consult_userspace(lc->uuid, DM_ULOG_GET_REGION_SIZE,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_GET_REGION_SIZE,
NULL, 0, (char *)&rdata, &rdata_size);
if (r) {
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_DTR,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_DTR,
NULL, 0,
NULL, NULL);
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_PRESUSPEND,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_PRESUSPEND,
NULL, 0,
NULL, NULL);
int r;
struct log_c *lc = log->context;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_POSTSUSPEND,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_POSTSUSPEND,
NULL, 0,
NULL, NULL);
struct log_c *lc = log->context;
lc->in_sync_hint = 0;
- r = dm_consult_userspace(lc->uuid, DM_ULOG_RESUME,
+ r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_RESUME,
NULL, 0,
NULL, NULL);
char *result, unsigned maxlen)
{
int r = 0;
+ char *table_args;
size_t sz = (size_t)maxlen;
struct log_c *lc = log->context;
break;
case STATUSTYPE_TABLE:
sz = 0;
- DMEMIT("%s %u %s %s", log->type->name, lc->usr_argc + 1,
- lc->uuid, lc->usr_argv_str);
+ table_args = strstr(lc->usr_argv_str, " ");
+ BUG_ON(!table_args); /* There will always be a ' ' */
+ table_args++;
+
+ DMEMIT("%s %u %s %s ", log->type->name, lc->usr_argc,
+ lc->uuid, table_args);
break;
}
return (r) ? 0 : (int)sz;
/**
* dm_consult_userspace
- * @uuid: log's uuid (must be DM_UUID_LEN in size)
+ * @uuid: log's universal unique identifier (must be DM_UUID_LEN in size)
+ * @luid: log's local unique identifier
* @request_type: found in include/linux/dm-log-userspace.h
* @data: data to tx to the server
* @data_size: size of data in bytes
*
* Returns: 0 on success, -EXXX on failure
**/
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
char *data, size_t data_size,
char *rdata, size_t *rdata_size)
{
memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
memcpy(tfr->uuid, uuid, DM_UUID_LEN);
+ tfr->luid = luid;
tfr->seq = dm_ulog_seq++;
/*
int dm_ulog_tfr_init(void);
void dm_ulog_tfr_exit(void);
-int dm_consult_userspace(const char *uuid, int request_type,
+int dm_consult_userspace(const char *uuid, uint64_t luid, int request_type,
char *data, size_t data_size,
char *rdata, size_t *rdata_size);
*/
dm_rh_inc_pending(ms->rh, &sync);
dm_rh_inc_pending(ms->rh, &nosync);
- ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0;
+
+ /*
+ * If the flush fails on a previous call and succeeds here,
+ * we must not reset the log_failure variable. We need
+ * userspace interaction to do that.
+ */
+ ms->log_failure = dm_rh_flush(ms->rh) ? 1 : ms->log_failure;
/*
* Dispatch io.
*/
void *zero_area;
+ /*
+ * An area used for header. The header can be written
+ * concurrently with metadata (when invalidating the snapshot),
+ * so it needs a separate buffer.
+ */
+ void *header_area;
+
/*
* Used to keep track of which metadata area the data in
* 'chunk' refers to.
*/
ps->area = vmalloc(len);
if (!ps->area)
- return r;
+ goto err_area;
ps->zero_area = vmalloc(len);
- if (!ps->zero_area) {
- vfree(ps->area);
- return r;
- }
+ if (!ps->zero_area)
+ goto err_zero_area;
memset(ps->zero_area, 0, len);
+ ps->header_area = vmalloc(len);
+ if (!ps->header_area)
+ goto err_header_area;
+
return 0;
+
+err_header_area:
+ vfree(ps->zero_area);
+
+err_zero_area:
+ vfree(ps->area);
+
+err_area:
+ return r;
}
static void free_area(struct pstore *ps)
if (ps->zero_area)
vfree(ps->zero_area);
ps->zero_area = NULL;
+
+ if (ps->header_area)
+ vfree(ps->header_area);
+ ps->header_area = NULL;
}
struct mdata_req {
/*
* Read or write a chunk aligned and sized block of data from a device.
*/
-static int chunk_io(struct pstore *ps, chunk_t chunk, int rw, int metadata)
+static int chunk_io(struct pstore *ps, void *area, chunk_t chunk, int rw,
+ int metadata)
{
struct dm_io_region where = {
.bdev = ps->store->cow->bdev,
struct dm_io_request io_req = {
.bi_rw = rw,
.mem.type = DM_IO_VMA,
- .mem.ptr.vma = ps->area,
+ .mem.ptr.vma = area,
.client = ps->io_client,
.notify.fn = NULL,
};
chunk = area_location(ps, ps->current_area);
- r = chunk_io(ps, chunk, rw, 0);
+ r = chunk_io(ps, ps->area, chunk, rw, 0);
if (r)
return r;
static int zero_disk_area(struct pstore *ps, chunk_t area)
{
- struct dm_io_region where = {
- .bdev = ps->store->cow->bdev,
- .sector = ps->store->chunk_size * area_location(ps, area),
- .count = ps->store->chunk_size,
- };
- struct dm_io_request io_req = {
- .bi_rw = WRITE,
- .mem.type = DM_IO_VMA,
- .mem.ptr.vma = ps->zero_area,
- .client = ps->io_client,
- .notify.fn = NULL,
- };
-
- return dm_io(&io_req, 1, &where, NULL);
+ return chunk_io(ps, ps->zero_area, area_location(ps, area), WRITE, 0);
}
static int read_header(struct pstore *ps, int *new_snapshot)
struct disk_header *dh;
chunk_t chunk_size;
int chunk_size_supplied = 1;
+ char *chunk_err;
/*
* Use default chunk size (or hardsect_size, if larger) if none supplied
if (r)
return r;
- r = chunk_io(ps, 0, READ, 1);
+ r = chunk_io(ps, ps->header_area, 0, READ, 1);
if (r)
goto bad;
- dh = (struct disk_header *) ps->area;
+ dh = ps->header_area;
if (le32_to_cpu(dh->magic) == 0) {
*new_snapshot = 1;
ps->version = le32_to_cpu(dh->version);
chunk_size = le32_to_cpu(dh->chunk_size);
- if (!chunk_size_supplied || ps->store->chunk_size == chunk_size)
+ if (ps->store->chunk_size == chunk_size)
return 0;
- DMWARN("chunk size %llu in device metadata overrides "
- "table chunk size of %llu.",
- (unsigned long long)chunk_size,
- (unsigned long long)ps->store->chunk_size);
+ if (chunk_size_supplied)
+ DMWARN("chunk size %llu in device metadata overrides "
+ "table chunk size of %llu.",
+ (unsigned long long)chunk_size,
+ (unsigned long long)ps->store->chunk_size);
/* We had a bogus chunk_size. Fix stuff up. */
free_area(ps);
- ps->store->chunk_size = chunk_size;
- ps->store->chunk_mask = chunk_size - 1;
- ps->store->chunk_shift = ffs(chunk_size) - 1;
+ r = dm_exception_store_set_chunk_size(ps->store, chunk_size,
+ &chunk_err);
+ if (r) {
+ DMERR("invalid on-disk chunk size %llu: %s.",
+ (unsigned long long)chunk_size, chunk_err);
+ return r;
+ }
r = dm_io_client_resize(sectors_to_pages(ps->store->chunk_size),
ps->io_client);
{
struct disk_header *dh;
- memset(ps->area, 0, ps->store->chunk_size << SECTOR_SHIFT);
+ memset(ps->header_area, 0, ps->store->chunk_size << SECTOR_SHIFT);
- dh = (struct disk_header *) ps->area;
+ dh = ps->header_area;
dh->magic = cpu_to_le32(SNAP_MAGIC);
dh->valid = cpu_to_le32(ps->valid);
dh->version = cpu_to_le32(ps->version);
dh->chunk_size = cpu_to_le32(ps->store->chunk_size);
- return chunk_io(ps, 0, WRITE, 1);
+ return chunk_io(ps, ps->header_area, 0, WRITE, 1);
}
/*
ps->valid = 1;
ps->version = SNAPSHOT_DISK_VERSION;
ps->area = NULL;
+ ps->zero_area = NULL;
+ ps->header_area = NULL;
ps->next_free = 2; /* skipping the header and first area */
ps->current_committed = 0;
return 0;
}
+static int snapshot_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct dm_snapshot *snap = ti->private;
+
+ return fn(ti, snap->origin, 0, ti->len, data);
+}
+
+
/*-----------------------------------------------------------------
* Origin methods
*---------------------------------------------------------------*/
return 0;
}
+static int origin_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct dm_dev *dev = ti->private;
+
+ return fn(ti, dev, 0, ti->len, data);
+}
+
static struct target_type origin_target = {
.name = "snapshot-origin",
- .version = {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = origin_ctr,
.dtr = origin_dtr,
.map = origin_map,
.resume = origin_resume,
.status = origin_status,
+ .iterate_devices = origin_iterate_devices,
};
static struct target_type snapshot_target = {
.name = "snapshot",
- .version = {1, 6, 0},
+ .version = {1, 7, 0},
.module = THIS_MODULE,
.ctr = snapshot_ctr,
.dtr = snapshot_dtr,
.end_io = snapshot_end_io,
.resume = snapshot_resume,
.status = snapshot_status,
+ .iterate_devices = snapshot_iterate_devices,
};
static int __init dm_snapshot_init(void)
return ret;
}
+static void stripe_io_hints(struct dm_target *ti,
+ struct queue_limits *limits)
+{
+ struct stripe_c *sc = ti->private;
+ unsigned chunk_size = (sc->chunk_mask + 1) << 9;
+
+ blk_limits_io_min(limits, chunk_size);
+ limits->io_opt = chunk_size * sc->stripes;
+}
+
static struct target_type stripe_target = {
.name = "striped",
- .version = {1, 2, 0},
+ .version = {1, 3, 0},
.module = THIS_MODULE,
.ctr = stripe_ctr,
.dtr = stripe_dtr,
.end_io = stripe_end_io,
.status = stripe_status,
.iterate_devices = stripe_iterate_devices,
+ .io_hints = stripe_io_hints,
};
int __init dm_stripe_init(void)
}
/*
- * If possible, this checks an area of a destination device is valid.
+ * If possible, this checks an area of a destination device is invalid.
*/
-static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
- sector_t start, sector_t len, void *data)
+static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
{
struct queue_limits *limits = data;
struct block_device *bdev = dev->bdev;
char b[BDEVNAME_SIZE];
if (!dev_size)
- return 1;
+ return 0;
if ((start >= dev_size) || (start + len > dev_size)) {
- DMWARN("%s: %s too small for target",
- dm_device_name(ti->table->md), bdevname(bdev, b));
- return 0;
+ DMWARN("%s: %s too small for target: "
+ "start=%llu, len=%llu, dev_size=%llu",
+ dm_device_name(ti->table->md), bdevname(bdev, b),
+ (unsigned long long)start,
+ (unsigned long long)len,
+ (unsigned long long)dev_size);
+ return 1;
}
if (logical_block_size_sectors <= 1)
- return 1;
+ return 0;
if (start & (logical_block_size_sectors - 1)) {
DMWARN("%s: start=%llu not aligned to h/w "
- "logical block size %hu of %s",
+ "logical block size %u of %s",
dm_device_name(ti->table->md),
(unsigned long long)start,
limits->logical_block_size, bdevname(bdev, b));
- return 0;
+ return 1;
}
if (len & (logical_block_size_sectors - 1)) {
DMWARN("%s: len=%llu not aligned to h/w "
- "logical block size %hu of %s",
+ "logical block size %u of %s",
dm_device_name(ti->table->md),
(unsigned long long)len,
limits->logical_block_size, bdevname(bdev, b));
- return 0;
+ return 1;
}
- return 1;
+ return 0;
}
/*
}
if (blk_stack_limits(limits, &q->limits, start << 9) < 0)
- DMWARN("%s: target device %s is misaligned",
- dm_device_name(ti->table->md), bdevname(bdev, b));
+ DMWARN("%s: target device %s is misaligned: "
+ "physical_block_size=%u, logical_block_size=%u, "
+ "alignment_offset=%u, start=%llu",
+ dm_device_name(ti->table->md), bdevname(bdev, b),
+ q->limits.physical_block_size,
+ q->limits.logical_block_size,
+ q->limits.alignment_offset,
+ (unsigned long long) start << 9);
+
/*
* Check if merge fn is supported.
if (remaining) {
DMWARN("%s: table line %u (start sect %llu len %llu) "
- "not aligned to h/w logical block size %hu",
+ "not aligned to h/w logical block size %u",
dm_device_name(table->md), i,
(unsigned long long) ti->begin,
(unsigned long long) ti->len,
ti->type->iterate_devices(ti, dm_set_device_limits,
&ti_limits);
+ /* Set I/O hints portion of queue limits */
+ if (ti->type->io_hints)
+ ti->type->io_hints(ti, &ti_limits);
+
/*
* Check each device area is consistent with the target's
* overall queue limits.
*/
- if (!ti->type->iterate_devices(ti, device_area_is_valid,
- &ti_limits))
+ if (ti->type->iterate_devices(ti, device_area_is_invalid,
+ &ti_limits))
return -EINVAL;
combine_limits:
dm_put(md);
}
+static void free_rq_clone(struct request *clone)
+{
+ struct dm_rq_target_io *tio = clone->end_io_data;
+
+ blk_rq_unprep_clone(clone);
+ free_rq_tio(tio);
+}
+
static void dm_unprep_request(struct request *rq)
{
struct request *clone = rq->special;
- struct dm_rq_target_io *tio = clone->end_io_data;
rq->special = NULL;
rq->cmd_flags &= ~REQ_DONTPREP;
- blk_rq_unprep_clone(clone);
- free_rq_tio(tio);
+ free_rq_clone(clone);
}
/*
rq->sense_len = clone->sense_len;
}
- BUG_ON(clone->bio);
- free_rq_tio(tio);
+ free_rq_clone(clone);
blk_end_request_all(rq, error);
# Siano Mobile Silicon Digital TV device configuration
#
-config DVB_SIANO_SMS1XXX
- tristate "Siano SMS1XXX USB dongle support"
- depends on DVB_CORE && USB && INPUT
+config SMS_SIANO_MDTV
+ tristate "Siano SMS1xxx based MDTV receiver"
+ depends on DVB_CORE && INPUT
---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset.
+ Choose Y or M here if you have MDTV receiver with a Siano chipset.
- To compile this driver as a module, choose M here: the
- module will be called sms1xxx.
+ To compile this driver as a module, choose M here
+ (The module will be called smsmdtv).
-config DVB_SIANO_SMS1XXX_SMS_IDS
- bool "Enable support for Siano Mobile Silicon default USB IDs"
- depends on DVB_SIANO_SMS1XXX
- default y
- ---help---
- Choose Y here if you have a USB dongle with a SMS1XXX chipset
- that uses Siano Mobile Silicon's default usb vid:pid.
+ Further documentation on this driver can be found on the WWW
+ at http://www.siano-ms.com/
+
+if SMS_SIANO_MDTV
+menu "Siano module components"
- Choose N here if you would prefer to use Siano's external driver.
+# Hardware interfaces support
- Further documentation on this driver can be found on the WWW at
- <http://www.siano-ms.com/>.
+config SMS_USB_DRV
+ tristate "USB interface support"
+ depends on DVB_CORE && USB
+ ---help---
+ Choose if you would like to have Siano's support for USB interface
+config SMS_SDIO_DRV
+ tristate "SDIO interface support"
+ depends on DVB_CORE && MMC
+ ---help---
+ Choose if you would like to have Siano's support for SDIO interface
+endmenu
+endif # SMS_SIANO_MDTV
-sms1xxx-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += sms1xxx.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsusb.o
-obj-$(CONFIG_DVB_SIANO_SMS1XXX) += smsdvb.o
+smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
+
+obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
+obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
+obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
0 : -ETIME;
}
+static inline int led_feedback(struct smsdvb_client_t *client)
+{
+ if (client->fe_status & FE_HAS_LOCK)
+ return sms_board_led_feedback(client->coredev,
+ (client->sms_stat_dvb.ReceptionData.BER
+ == 0) ? SMS_LED_HI : SMS_LED_LO);
+ else
+ return sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+}
+
static int smsdvb_read_status(struct dvb_frontend *fe, fe_status_t *stat)
{
struct smsdvb_client_t *client;
*stat = client->fe_status;
+ led_feedback(client);
+
return 0;
}
*ber = client->sms_stat_dvb.ReceptionData.BER;
+ led_feedback(client);
+
return 0;
}
(client->sms_stat_dvb.ReceptionData.InBandPwr
+ 95) * 3 / 2;
+ led_feedback(client);
+
return 0;
}
*snr = client->sms_stat_dvb.ReceptionData.SNR;
+ led_feedback(client);
+
return 0;
}
*ucblocks = client->sms_stat_dvb.ReceptionData.ErrorTSPackets;
+ led_feedback(client);
+
return 0;
}
u32 Data[3];
} Msg;
+ int ret;
+
client->fe_status = FE_HAS_SIGNAL;
client->event_fe_state = -1;
client->event_unc_state = -1;
case BANDWIDTH_AUTO: return -EOPNOTSUPP;
default: return -EINVAL;
}
+ /* Disable LNA, if any. An error is returned if no LNA is present */
+ ret = sms_board_lna_control(client->coredev, 0);
+ if (ret == 0) {
+ fe_status_t status;
+
+ /* tune with LNA off at first */
+ ret = smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
+ &client->tune_done);
+
+ smsdvb_read_status(fe, &status);
+
+ if (status & FE_HAS_LOCK)
+ return ret;
+
+ /* previous tune didnt lock - enable LNA and tune again */
+ sms_board_lna_control(client->coredev, 1);
+ }
return smsdvb_sendrequest_and_wait(client, &Msg, sizeof(Msg),
&client->tune_done);
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_power(client->coredev, 1);
+
sms_board_dvb3_event(client, DVB3_EVENT_INIT);
return 0;
}
struct smsdvb_client_t *client =
container_of(fe, struct smsdvb_client_t, frontend);
+ sms_board_led_feedback(client->coredev, SMS_LED_OFF);
+ sms_board_power(client->coredev, 0);
+
sms_board_dvb3_event(client, DVB3_EVENT_SLEEP);
return 0;
#define SMSSDIO_DATA 0x00
#define SMSSDIO_INT 0x04
+#define SMSSDIO_BLOCK_SIZE 128
static const struct sdio_device_id smssdio_ids[] = {
{SDIO_DEVICE(SDIO_VENDOR_ID_SIANO, SDIO_DEVICE_ID_SIANO_STELLAR),
sdio_claim_host(smsdev->func);
while (size >= smsdev->func->cur_blksize) {
- ret = sdio_write_blocks(smsdev->func, SMSSDIO_DATA, buffer, 1);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, smsdev->func->cur_blksize);
if (ret)
goto out;
}
if (size) {
- ret = sdio_write_bytes(smsdev->func, SMSSDIO_DATA,
- buffer, size);
+ ret = sdio_memcpy_toio(smsdev->func, SMSSDIO_DATA,
+ buffer, size);
}
out:
*/
isr = sdio_readb(func, SMSSDIO_INT, &ret);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Unable to read interrupt register!\n");
+ sms_err("Unable to read interrupt register!\n");
return;
}
if (smsdev->split_cb == NULL) {
cb = smscore_getbuffer(smsdev->coredev);
if (!cb) {
- dev_err(&smsdev->func->dev,
- "Unable to allocate data buffer!\n");
+ sms_err("Unable to allocate data buffer!\n");
return;
}
- ret = sdio_read_blocks(smsdev->func, cb->p, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ cb->p,
+ SMSSDIO_DATA,
+ SMSSDIO_BLOCK_SIZE);
if (ret) {
- dev_err(&smsdev->func->dev,
- "Error %d reading initial block!\n", ret);
+ sms_err("Error %d reading initial block!\n", ret);
return;
}
return;
}
- size = hdr->msgLength - smsdev->func->cur_blksize;
+ if (hdr->msgLength > smsdev->func->cur_blksize)
+ size = hdr->msgLength - smsdev->func->cur_blksize;
+ else
+ size = 0;
} else {
cb = smsdev->split_cb;
hdr = cb->p;
smsdev->split_cb = NULL;
}
- if (hdr->msgLength > smsdev->func->cur_blksize) {
+ if (size) {
void *buffer;
- size = ALIGN(size, 128);
- buffer = cb->p + hdr->msgLength;
+ buffer = cb->p + (hdr->msgLength - size);
+ size = ALIGN(size, SMSSDIO_BLOCK_SIZE);
- BUG_ON(smsdev->func->cur_blksize != 128);
+ BUG_ON(smsdev->func->cur_blksize != SMSSDIO_BLOCK_SIZE);
/*
* First attempt to transfer all of it in one go...
*/
- ret = sdio_read_blocks(smsdev->func, buffer,
- SMSSDIO_DATA, size / 128);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer,
+ SMSSDIO_DATA,
+ size);
if (ret && ret != -EINVAL) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading data from card!\n", ret);
+ sms_err("Error %d reading data from card!\n", ret);
return;
}
*/
if (ret == -EINVAL) {
while (size) {
- ret = sdio_read_blocks(smsdev->func,
- buffer, SMSSDIO_DATA, 1);
+ ret = sdio_memcpy_fromio(smsdev->func,
+ buffer, SMSSDIO_DATA,
+ smsdev->func->cur_blksize);
if (ret) {
smscore_putbuffer(smsdev->coredev, cb);
- dev_err(&smsdev->func->dev,
- "Error %d reading "
+ sms_err("Error %d reading "
"data from card!\n", ret);
return;
}
if (ret)
goto release;
- ret = sdio_set_block_size(func, 128);
+ ret = sdio_set_block_size(func, SMSSDIO_BLOCK_SIZE);
if (ret)
goto disable;
EM28XX_I2C_FREQ_100_KHZ;
}
+
+/* FIXME: Should be replaced by a proper mt9m111 driver */
+static int em28xx_initialize_mt9m111(struct em28xx *dev)
+{
+ int i;
+ unsigned char regs[][3] = {
+ { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
+ { 0x0d, 0x00, 0x00, },
+ { 0x0a, 0x00, 0x21, },
+ { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
+ };
+
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ i2c_master_send(&dev->i2c_client, ®s[i][0], 3);
+
+ return 0;
+}
+
+
/* FIXME: Should be replaced by a proper mt9m001 driver */
static int em28xx_initialize_mt9m001(struct em28xx *dev)
{
/* HINT method: webcam I2C chips
*
- * This method work for webcams with Micron sensors
+ * This method works for webcams with Micron sensors
*/
static int em28xx_hint_sensor(struct em28xx *dev)
{
dev->vinctl = 0x00;
break;
+
+ case 0x143a: /* MT9M111 as found in the ECS G200 */
+ dev->model = EM2750_BOARD_UNKNOWN;
+ em28xx_set_model(dev);
+
+ sensor_name = "mt9m111";
+ dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
+ dev->em28xx_sensor = EM28XX_MT9M111;
+ em28xx_initialize_mt9m111(dev);
+ dev->sensor_xres = 640;
+ dev->sensor_yres = 512;
+
+ dev->vinmode = 0x0a;
+ dev->vinctl = 0x00;
+
+ break;
+
case 0x8431:
dev->model = EM2750_BOARD_UNKNOWN;
em28xx_set_model(dev);
break;
default:
- printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
+ printk("Unknown Micron Sensor 0x%04x\n", version);
return -EINVAL;
}
}
em28xx_tuner_setup(dev);
- em28xx_ir_init(dev);
+
+ if(!disable_ir)
+ em28xx_ir_init(dev);
}
EM28XX_NOSENSOR = 0,
EM28XX_MT9V011,
EM28XX_MT9M001,
+ EM28XX_MT9M111,
};
enum em28xx_adecoder {
config USB_GSPCA_SN9C20X_EVDEV
bool "Enable evdev support"
- depends on USB_GSPCA_SN9C20X
+ depends on USB_GSPCA_SN9C20X && INPUT
---help---
Say Y here in order to enable evdev support for sn9c20x webcam button.
for (i = 0; i < 2; i++) {
err =
send_control_msg(udev, 1, init[cam->method][i].value,
- 0, init[i][cam->method].bytes,
+ 0, init[cam->method][i].bytes,
init[cam->method][i].size);
if (err < 0) {
dev_err(&udev->dev, "error during release sequence\n");
dev_set_drvdata(&ofdev->dev, NULL);
+ unregister_netdev(dev);
iounmap(priv->regs);
free_netdev(priv->ndev);
return 0;
}
-static int ipw_fw_dma_add_buffer(struct ipw_priv *priv,
- u32 src_phys, u32 dest_address, u32 length)
+static int ipw_fw_dma_add_buffer(struct ipw_priv *priv, dma_addr_t *src_address,
+ int nr, u32 dest_address, u32 len)
{
- u32 bytes_left = length;
- u32 src_offset = 0;
- u32 dest_offset = 0;
- int status = 0;
+ int ret, i;
+ u32 size;
+
IPW_DEBUG_FW(">> \n");
- IPW_DEBUG_FW_INFO("src_phys=0x%x dest_address=0x%x length=0x%x\n",
- src_phys, dest_address, length);
- while (bytes_left > CB_MAX_LENGTH) {
- status = ipw_fw_dma_add_command_block(priv,
- src_phys + src_offset,
- dest_address +
- dest_offset,
- CB_MAX_LENGTH, 0, 0);
- if (status) {
+ IPW_DEBUG_FW_INFO("nr=%d dest_address=0x%x len=0x%x\n",
+ nr, dest_address, len);
+
+ for (i = 0; i < nr; i++) {
+ size = min_t(u32, len - i * CB_MAX_LENGTH, CB_MAX_LENGTH);
+ ret = ipw_fw_dma_add_command_block(priv, src_address[i],
+ dest_address +
+ i * CB_MAX_LENGTH, size,
+ 0, 0);
+ if (ret) {
IPW_DEBUG_FW_INFO(": Failed\n");
return -1;
} else
IPW_DEBUG_FW_INFO(": Added new cb\n");
-
- src_offset += CB_MAX_LENGTH;
- dest_offset += CB_MAX_LENGTH;
- bytes_left -= CB_MAX_LENGTH;
- }
-
- /* add the buffer tail */
- if (bytes_left > 0) {
- status =
- ipw_fw_dma_add_command_block(priv, src_phys + src_offset,
- dest_address + dest_offset,
- bytes_left, 0, 0);
- if (status) {
- IPW_DEBUG_FW_INFO(": Failed on the buffer tail\n");
- return -1;
- } else
- IPW_DEBUG_FW_INFO
- (": Adding new cb - the buffer tail\n");
}
IPW_DEBUG_FW("<< \n");
static int ipw_load_firmware(struct ipw_priv *priv, u8 * data, size_t len)
{
- int rc = -1;
+ int ret = -1;
int offset = 0;
struct fw_chunk *chunk;
- dma_addr_t shared_phys;
- u8 *shared_virt;
+ int total_nr = 0;
+ int i;
+ struct pci_pool *pool;
+ u32 *virts[CB_NUMBER_OF_ELEMENTS_SMALL];
+ dma_addr_t phys[CB_NUMBER_OF_ELEMENTS_SMALL];
IPW_DEBUG_TRACE("<< : \n");
- shared_virt = pci_alloc_consistent(priv->pci_dev, len, &shared_phys);
- if (!shared_virt)
+ pool = pci_pool_create("ipw2200", priv->pci_dev, CB_MAX_LENGTH, 0, 0);
+ if (!pool) {
+ IPW_ERROR("pci_pool_create failed\n");
return -ENOMEM;
-
- memmove(shared_virt, data, len);
+ }
/* Start the Dma */
- rc = ipw_fw_dma_enable(priv);
+ ret = ipw_fw_dma_enable(priv);
/* the DMA is already ready this would be a bug. */
BUG_ON(priv->sram_desc.last_cb_index > 0);
do {
+ u32 chunk_len;
+ u8 *start;
+ int size;
+ int nr = 0;
+
chunk = (struct fw_chunk *)(data + offset);
offset += sizeof(struct fw_chunk);
+ chunk_len = le32_to_cpu(chunk->length);
+ start = data + offset;
+
+ nr = (chunk_len + CB_MAX_LENGTH - 1) / CB_MAX_LENGTH;
+ for (i = 0; i < nr; i++) {
+ virts[total_nr] = pci_pool_alloc(pool, GFP_KERNEL,
+ &phys[total_nr]);
+ if (!virts[total_nr]) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ size = min_t(u32, chunk_len - i * CB_MAX_LENGTH,
+ CB_MAX_LENGTH);
+ memcpy(virts[total_nr], start, size);
+ start += size;
+ total_nr++;
+ /* We don't support fw chunk larger than 64*8K */
+ BUG_ON(total_nr > CB_NUMBER_OF_ELEMENTS_SMALL);
+ }
+
/* build DMA packet and queue up for sending */
/* dma to chunk->address, the chunk->length bytes from data +
* offeset*/
/* Dma loading */
- rc = ipw_fw_dma_add_buffer(priv, shared_phys + offset,
- le32_to_cpu(chunk->address),
- le32_to_cpu(chunk->length));
- if (rc) {
+ ret = ipw_fw_dma_add_buffer(priv, &phys[total_nr - nr],
+ nr, le32_to_cpu(chunk->address),
+ chunk_len);
+ if (ret) {
IPW_DEBUG_INFO("dmaAddBuffer Failed\n");
goto out;
}
- offset += le32_to_cpu(chunk->length);
+ offset += chunk_len;
} while (offset < len);
/* Run the DMA and wait for the answer */
- rc = ipw_fw_dma_kick(priv);
- if (rc) {
+ ret = ipw_fw_dma_kick(priv);
+ if (ret) {
IPW_ERROR("dmaKick Failed\n");
goto out;
}
- rc = ipw_fw_dma_wait(priv);
- if (rc) {
+ ret = ipw_fw_dma_wait(priv);
+ if (ret) {
IPW_ERROR("dmaWaitSync Failed\n");
goto out;
}
- out:
- pci_free_consistent(priv->pci_dev, len, shared_virt, shared_phys);
- return rc;
+ out:
+ for (i = 0; i < total_nr; i++)
+ pci_pool_free(pool, virts[i], phys[i]);
+
+ pci_pool_destroy(pool);
+
+ return ret;
}
/* stop nic */
4 * (resno - PCI_IOV_RESOURCES);
}
+/**
+ * pci_sriov_resource_alignment - get resource alignment for VF BAR
+ * @dev: the PCI device
+ * @resno: the resource number
+ *
+ * Returns the alignment of the VF BAR found in the SR-IOV capability.
+ * This is not the same as the resource size which is defined as
+ * the VF BAR size multiplied by the number of VFs. The alignment
+ * is just the VF BAR size.
+ */
+int pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
+{
+ struct resource tmp;
+ enum pci_bar_type type;
+ int reg = pci_iov_resource_bar(dev, resno, &type);
+
+ if (!reg)
+ return 0;
+
+ __pci_read_base(dev, type, &tmp, reg);
+ return resource_alignment(&tmp);
+}
+
/**
* pci_restore_iov_state - restore the state of the IOV capability
* @dev: the PCI device
extern void pci_iov_release(struct pci_dev *dev);
extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
enum pci_bar_type *type);
+extern int pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
extern void pci_restore_iov_state(struct pci_dev *dev);
extern int pci_iov_bus_range(struct pci_bus *bus);
}
#endif /* CONFIG_PCI_IOV */
+static inline int pci_resource_alignment(struct pci_dev *dev,
+ struct resource *res)
+{
+#ifdef CONFIG_PCI_IOV
+ int resno = res - dev->resource;
+
+ if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END)
+ return pci_sriov_resource_alignment(dev, resno);
+#endif
+ return resource_alignment(res);
+}
+
#endif /* DRIVERS_PCI_H */
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
-
+#include "pci.h"
static void pbus_assign_resources_sorted(const struct pci_bus *bus)
{
continue;
r_size = resource_size(r);
/* For bridges size != alignment */
- align = resource_alignment(r);
+ align = pci_resource_alignment(dev, r);
order = __ffs(align) - 20;
if (order > 11) {
dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
size = resource_size(res);
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
- align = resource_alignment(res);
+ align = pci_resource_alignment(dev, res);
/* First, try exact prefetching match.. */
ret = pci_bus_alloc_resource(bus, res, size, align, min,
struct pci_bus *bus;
int ret;
- align = resource_alignment(res);
+ align = pci_resource_alignment(dev, res);
if (!align) {
dev_info(&dev->dev, "BAR %d: can't allocate resource (bogus "
"alignment) %pR flags %#lx\n",
if (!(r->flags) || r->parent)
continue;
- r_align = resource_alignment(r);
+ r_align = pci_resource_alignment(dev, r);
if (!r_align) {
dev_warn(&dev->dev, "BAR %d: bogus alignment "
"%pR flags %#lx\n",
struct resource_list *ln = list->next;
if (ln)
- align = resource_alignment(ln->res);
+ align = pci_resource_alignment(ln->dev, ln->res);
if (r_align > align) {
tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
}
/* Update the expiry counter if fs is busy */
- if (!may_umount_tree(mnt)) {
+ if (!may_umount_tree(path.mnt)) {
struct autofs_info *ino = autofs4_dentry_ino(top);
ino->last_used = jiffies;
goto done;
if (!bprm)
goto out_files;
- retval = -ERESTARTNOINTR;
- if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ retval = prepare_bprm_creds(bprm);
+ if (retval)
goto out_free;
- current->in_execve = 1;
-
- retval = -ENOMEM;
- bprm->cred = prepare_exec_creds();
- if (!bprm->cred)
- goto out_unlock;
retval = check_unsafe_exec(bprm);
if (retval < 0)
- goto out_unlock;
+ goto out_free;
clear_in_exec = retval;
+ current->in_execve = 1;
file = open_exec(filename);
retval = PTR_ERR(file);
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
acct_update_integrals(current);
free_bprm(bprm);
if (displaced)
out_unmark:
if (clear_in_exec)
current->fs->in_exec = 0;
-
-out_unlock:
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
out_free:
free_bprm(bprm);
EXPORT_SYMBOL(flush_old_exec);
+/*
+ * Prepare credentials and lock ->cred_guard_mutex.
+ * install_exec_creds() commits the new creds and drops the lock.
+ * Or, if exec fails before, free_bprm() should release ->cred and
+ * and unlock.
+ */
+int prepare_bprm_creds(struct linux_binprm *bprm)
+{
+ if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ return -ERESTARTNOINTR;
+
+ bprm->cred = prepare_exec_creds();
+ if (likely(bprm->cred))
+ return 0;
+
+ mutex_unlock(¤t->cred_guard_mutex);
+ return -ENOMEM;
+}
+
+void free_bprm(struct linux_binprm *bprm)
+{
+ free_arg_pages(bprm);
+ if (bprm->cred) {
+ mutex_unlock(¤t->cred_guard_mutex);
+ abort_creds(bprm->cred);
+ }
+ kfree(bprm);
+}
+
/*
* install the new credentials for this executable
*/
commit_creds(bprm->cred);
bprm->cred = NULL;
-
- /* cred_guard_mutex must be held at least to this point to prevent
+ /*
+ * cred_guard_mutex must be held at least to this point to prevent
* ptrace_attach() from altering our determination of the task's
- * credentials; any time after this it may be unlocked */
-
+ * credentials; any time after this it may be unlocked.
+ */
security_bprm_committed_creds(bprm);
+ mutex_unlock(¤t->cred_guard_mutex);
}
EXPORT_SYMBOL(install_exec_creds);
EXPORT_SYMBOL(search_binary_handler);
-void free_bprm(struct linux_binprm *bprm)
-{
- free_arg_pages(bprm);
- if (bprm->cred)
- abort_creds(bprm->cred);
- kfree(bprm);
-}
-
/*
* sys_execve() executes a new program.
*/
if (!bprm)
goto out_files;
- retval = -ERESTARTNOINTR;
- if (mutex_lock_interruptible(¤t->cred_guard_mutex))
+ retval = prepare_bprm_creds(bprm);
+ if (retval)
goto out_free;
- current->in_execve = 1;
-
- retval = -ENOMEM;
- bprm->cred = prepare_exec_creds();
- if (!bprm->cred)
- goto out_unlock;
retval = check_unsafe_exec(bprm);
if (retval < 0)
- goto out_unlock;
+ goto out_free;
clear_in_exec = retval;
+ current->in_execve = 1;
file = open_exec(filename);
retval = PTR_ERR(file);
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
acct_update_integrals(current);
free_bprm(bprm);
if (displaced)
out_unmark:
if (clear_in_exec)
current->fs->in_exec = 0;
-
-out_unlock:
current->in_execve = 0;
- mutex_unlock(¤t->cred_guard_mutex);
out_free:
free_bprm(bprm);
if (dir_de) {
if (old_dir != new_dir)
ext2_set_link(old_inode, dir_de, dir_page, new_dir, 0);
+ else {
+ kunmap(dir_page);
+ page_cache_release(dir_page);
+ }
inode_dec_link_count(old_dir);
}
return 0;
* We cannot call radix_tree_preload for the kernels older
* than 2.6.23, because it is not exported for modules.
*/
+retry:
err = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
if (err)
goto failed_unlock;
(unsigned long long)oldkey,
(unsigned long long)newkey);
-retry:
spin_lock_irq(&btnc->tree_lock);
err = radix_tree_insert(&btnc->page_tree, newkey, obh->b_page);
spin_unlock_irq(&btnc->tree_lock);
* we know zeros will only be needed in the first and/or last cluster.
*/
if (clusters_to_alloc || extents_to_split ||
- wc->w_desc[0].c_needs_zero ||
- wc->w_desc[wc->w_clen - 1].c_needs_zero)
+ (wc->w_clen && (wc->w_desc[0].c_needs_zero ||
+ wc->w_desc[wc->w_clen - 1].c_needs_zero)))
cluster_of_pages = 1;
else
cluster_of_pages = 0;
goto bail;
}
+ /*
+ * If the last lookup failed to create dentry lock, let us
+ * redo it.
+ */
+ if (!dentry->d_fsdata) {
+ mlog(0, "Inode %llu doesn't have dentry lock, "
+ "returning false\n",
+ (unsigned long long)OCFS2_I(inode)->ip_blkno);
+ goto bail;
+ }
+
ret = 1;
bail:
case XFS_IOC_GETVERSION_32:
cmd = _NATIVE_IOC(cmd, long);
return xfs_file_ioctl(filp, cmd, p);
- case XFS_IOC_SWAPEXT: {
+ case XFS_IOC_SWAPEXT_32: {
struct xfs_swapext sxp;
struct compat_xfs_swapext __user *sxu = arg;
void crypto_init_queue(struct crypto_queue *queue, unsigned int max_qlen);
int crypto_enqueue_request(struct crypto_queue *queue,
struct crypto_async_request *request);
+void *__crypto_dequeue_request(struct crypto_queue *queue, unsigned int offset);
struct crypto_async_request *crypto_dequeue_request(struct crypto_queue *queue);
int crypto_tfm_in_queue(struct crypto_queue *queue, struct crypto_tfm *tfm);
static inline struct skcipher_givcrypt_request *skcipher_dequeue_givcrypt(
struct crypto_queue *queue)
{
- return container_of(ablkcipher_dequeue_request(queue),
- struct skcipher_givcrypt_request, creq);
+ return __crypto_dequeue_request(
+ queue, offsetof(struct skcipher_givcrypt_request, creq.base));
}
static inline void *skcipher_givcrypt_reqctx(
int executable_stack);
extern int bprm_mm_init(struct linux_binprm *bprm);
extern int copy_strings_kernel(int argc,char ** argv,struct linux_binprm *bprm);
+extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
extern int set_binfmt(struct linux_binfmt *new);
iterate_devices_callout_fn fn,
void *data);
+typedef void (*dm_io_hints_fn) (struct dm_target *ti,
+ struct queue_limits *limits);
+
/*
* Returns:
* 0: The target can handle the next I/O immediately.
dm_merge_fn merge;
dm_busy_fn busy;
dm_iterate_devices_fn iterate_devices;
+ dm_io_hints_fn io_hints;
/* For internal device-mapper use. */
struct list_head list;
(DM_ULOG_REQUEST_MASK & (request_type))
struct dm_ulog_request {
- char uuid[DM_UUID_LEN]; /* Ties a request to a specific mirror log */
+ /*
+ * The local unique identifier (luid) and the universally unique
+ * identifier (uuid) are used to tie a request to a specific
+ * mirror log. A single machine log could probably make due with
+ * just the 'luid', but a cluster-aware log must use the 'uuid' and
+ * the 'luid'. The uuid is what is required for node to node
+ * communication concerning a particular log, but the 'luid' helps
+ * differentiate between logs that are being swapped and have the
+ * same 'uuid'. (Think "live" and "inactive" device-mapper tables.)
+ */
+ uint64_t luid;
+ char uuid[DM_UUID_LEN];
char padding[7]; /* Padding because DM_UUID_LEN = 129 */
int32_t error; /* Used to report back processing errors */
extern u64 __init __lmb_alloc_base(u64 size,
u64 align, u64 max_addr);
extern u64 __init lmb_phys_mem_size(void);
-extern u64 __init lmb_end_of_DRAM(void);
+extern u64 lmb_end_of_DRAM(void);
extern void __init lmb_enforce_memory_limit(u64 memory_limit);
extern int __init lmb_is_reserved(u64 addr);
extern int lmb_find(struct lmb_property *res);
return ret;
}
+/*
+ * Like above, but uses del_timer() instead of del_timer_sync(). This means,
+ * if it returns 0 the timer function may be running and the queueing is in
+ * progress.
+ */
+static inline int __cancel_delayed_work(struct delayed_work *work)
+{
+ int ret;
+
+ ret = del_timer(&work->timer);
+ if (ret)
+ work_clear_pending(&work->work);
+ return ret;
+}
+
extern int cancel_delayed_work_sync(struct delayed_work *work);
/* Obsolete. use cancel_delayed_work_sync() */
}
struct qdisc_watchdog {
- struct tasklet_hrtimer timer;
- struct Qdisc *qdisc;
+ struct hrtimer timer;
+ struct Qdisc *qdisc;
};
extern void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc);
* 1 - disallow cpu counters to unpriv
* 2 - disallow kernel profiling to unpriv
*/
-int sysctl_perf_counter_paranoid __read_mostly;
+int sysctl_perf_counter_paranoid __read_mostly = 1;
static inline bool perf_paranoid_cpu(void)
{
hwc->sample_period = attr->sample_period;
if (attr->freq && attr->sample_freq)
hwc->sample_period = 1;
+ hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
}
vma->vm_region = region;
+ add_nommu_region(region);
/* set up the mapping */
if (file && vma->vm_flags & VM_SHARED)
if (ret < 0)
goto error_put_region;
- add_nommu_region(region);
-
/* okay... we have a mapping; now we have to register it */
result = vma->vm_start;
* agressive about taking ownership of free pages
*/
if (unlikely(current_order >= (pageblock_order >> 1)) ||
- start_migratetype == MIGRATE_RECLAIMABLE) {
+ start_migratetype == MIGRATE_RECLAIMABLE ||
+ page_group_by_mobility_disabled) {
unsigned long pages;
pages = move_freepages_block(zone, page,
start_migratetype);
/* Claim the whole block if over half of it is free */
- if (pages >= (1 << (pageblock_order-1)))
+ if (pages >= (1 << (pageblock_order-1)) ||
+ page_group_by_mobility_disabled)
set_pageblock_migratetype(page,
start_migratetype);
static bool pcpu_chunk_page_occupied(struct pcpu_chunk *chunk,
int page_idx)
{
- return *pcpu_chunk_pagep(chunk, 0, page_idx) != NULL;
+ /*
+ * Any possible cpu id can be used here, so there's no need to
+ * worry about preemption or cpu hotplug.
+ */
+ return *pcpu_chunk_pagep(chunk, raw_smp_processor_id(),
+ page_idx) != NULL;
}
/* set the pointer to a chunk in a page struct */
return pcpu_first_chunk;
}
+ /*
+ * The address is relative to unit0 which might be unused and
+ * thus unmapped. Offset the address to the unit space of the
+ * current processor before looking it up in the vmalloc
+ * space. Note that any possible cpu id can be used here, so
+ * there's no need to worry about preemption or cpu hotplug.
+ */
+ addr += raw_smp_processor_id() * pcpu_unit_size;
return pcpu_get_page_chunk(vmalloc_to_page(addr));
}
*/
void kmem_cache_destroy(struct kmem_cache *s)
{
- if (s->flags & SLAB_DESTROY_BY_RCU)
- rcu_barrier();
down_write(&slub_lock);
s->refcount--;
if (!s->refcount) {
"still has objects.\n", s->name, __func__);
dump_stack();
}
+ if (s->flags & SLAB_DESTROY_BY_RCU)
+ rcu_barrier();
sysfs_slab_remove(s);
} else
up_write(&slub_lock);
sk->sk_prot = sk->sk_prot_creator = prot;
sock_lock_init(sk);
sock_net_set(sk, get_net(net));
+ atomic_set(&sk->sk_wmem_alloc, 1);
}
return sk;
*/
smp_wmb();
atomic_set(&sk->sk_refcnt, 1);
- atomic_set(&sk->sk_wmem_alloc, 1);
atomic_set(&sk->sk_drops, 0);
}
EXPORT_SYMBOL(sock_init_data);
static enum hrtimer_restart qdisc_watchdog(struct hrtimer *timer)
{
struct qdisc_watchdog *wd = container_of(timer, struct qdisc_watchdog,
- timer.timer);
+ timer);
wd->qdisc->flags &= ~TCQ_F_THROTTLED;
__netif_schedule(qdisc_root(wd->qdisc));
void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc)
{
- tasklet_hrtimer_init(&wd->timer, qdisc_watchdog,
- CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ hrtimer_init(&wd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ wd->timer.function = qdisc_watchdog;
wd->qdisc = qdisc;
}
EXPORT_SYMBOL(qdisc_watchdog_init);
wd->qdisc->flags |= TCQ_F_THROTTLED;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_TICKS2NS(expires));
- tasklet_hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
+ hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS);
}
EXPORT_SYMBOL(qdisc_watchdog_schedule);
void qdisc_watchdog_cancel(struct qdisc_watchdog *wd)
{
- tasklet_hrtimer_cancel(&wd->timer);
+ hrtimer_cancel(&wd->timer);
wd->qdisc->flags &= ~TCQ_F_THROTTLED;
}
EXPORT_SYMBOL(qdisc_watchdog_cancel);
nlh = NLMSG_NEW(skb, pid, seq, event, sizeof(*tcm), flags);
tcm = NLMSG_DATA(nlh);
tcm->tcm_family = AF_UNSPEC;
+ tcm->tcm__pad1 = 0;
+ tcm->tcm__pad2 = 0;
tcm->tcm_ifindex = qdisc_dev(q)->ifindex;
tcm->tcm_parent = q->handle;
tcm->tcm_handle = q->handle;
psched_time_t now_rt; /* Cached real time */
unsigned pmask;
- struct tasklet_hrtimer delay_timer;
+ struct hrtimer delay_timer;
struct qdisc_watchdog watchdog; /* Watchdog timer,
started when CBQ has
backlog, but cannot
cl->undertime = q->now + delay;
if (delay > 0) {
- struct hrtimer *ht;
-
sched += delay + cl->penalty;
cl->penalized = sched;
cl->cpriority = TC_CBQ_MAXPRIO;
expires = ktime_set(0, 0);
expires = ktime_add_ns(expires, PSCHED_TICKS2NS(sched));
- ht = &q->delay_timer.timer;
- if (hrtimer_try_to_cancel(ht) &&
- ktime_to_ns(ktime_sub(hrtimer_get_expires(ht),
- expires)) > 0)
- hrtimer_set_expires(ht, expires);
- hrtimer_restart(ht);
+ if (hrtimer_try_to_cancel(&q->delay_timer) &&
+ ktime_to_ns(ktime_sub(
+ hrtimer_get_expires(&q->delay_timer),
+ expires)) > 0)
+ hrtimer_set_expires(&q->delay_timer, expires);
+ hrtimer_restart(&q->delay_timer);
cl->delayed = 1;
cl->xstats.overactions++;
return;
static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
{
struct cbq_sched_data *q = container_of(timer, struct cbq_sched_data,
- delay_timer.timer);
+ delay_timer);
struct Qdisc *sch = q->watchdog.qdisc;
psched_time_t now;
psched_tdiff_t delay = 0;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_TICKS2NS(now + delay));
- tasklet_hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
+ hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS);
}
sch->flags &= ~TCQ_F_THROTTLED;
q->tx_class = NULL;
q->tx_borrowed = NULL;
qdisc_watchdog_cancel(&q->watchdog);
- tasklet_hrtimer_cancel(&q->delay_timer);
+ hrtimer_cancel(&q->delay_timer);
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
q->now_rt = q->now;
q->link.minidle = -0x7FFFFFFF;
qdisc_watchdog_init(&q->watchdog, sch);
- tasklet_hrtimer_init(&q->delay_timer, cbq_undelay,
- CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+ hrtimer_init(&q->delay_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
q->delay_timer.function = cbq_undelay;
q->toplevel = TC_CBQ_MAXLEVEL;
q->now = psched_get_time();
};
/*
- * 6ch mode
+ * 4ch mode
*/
-static struct hda_verb alc885_mbp_ch6_init[] = {
+static struct hda_verb alc885_mbp_ch4_init[] = {
{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
{ } /* end */
};
-static struct hda_channel_mode alc885_mbp_6ch_modes[2] = {
+static struct hda_channel_mode alc885_mbp_4ch_modes[2] = {
{ 2, alc885_mbp_ch2_init },
- { 6, alc885_mbp_ch6_init },
+ { 4, alc885_mbp_ch4_init },
};
/*
};
static struct snd_kcontrol_new alc885_mbp3_mixer[] = {
- HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Headphone Playback Switch", 0x0e, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* HP mixer */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
/* Front Pin: output 0 (0x0c) */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* HP Pin: output 0 (0x0d) */
+ /* HP Pin: output 0 (0x0e) */
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
- {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x02},
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
/* Mic (rear) pin: input vref at 80% */
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
.mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
.init_verbs = { alc885_mbp3_init_verbs,
alc880_gpio1_init_verbs },
- .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .num_dacs = 2,
.dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mbp_6ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mbp_6ch_modes),
+ .hp_nid = 0x04,
+ .channel_mode = alc885_mbp_4ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
.input_mux = &alc882_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
if (!spec->adc_nids && spec->input_mux) {
spec->adc_nids = vt1708_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(vt1708_adc_nids);
+ get_mux_nids(codec);
spec->mixers[spec->num_mixers] = vt1708_capture_mixer;
spec->num_mixers++;
}
* chip didn't if the first EEPROM word was overwritten.
*/
subdevice = oxygen_read_eeprom(chip, 2);
+ /* use default ID if EEPROM is missing */
+ if (subdevice == 0xffff)
+ subdevice = 0x8788;
/*
* We use only the subsystem device ID for searching because it is
* unique even without the subsystem vendor ID, which may have been
oxygen_write16_masked(chip, OXYGEN_I2S_MULTICH_FORMAT,
oxygen_rate(hw_params) |
chip->model.dac_i2s_format |
+ oxygen_i2s_mclk(hw_params) |
oxygen_i2s_bits(hw_params),
OXYGEN_I2S_RATE_MASK |
OXYGEN_I2S_FORMAT_MASK |
+ OXYGEN_I2S_MCLK_MASK |
OXYGEN_I2S_BITS_MASK);
oxygen_update_dac_routing(chip);
oxygen_update_spdif_source(chip);
git.openpandora.org / pandora-kernel.git / commitdiff