ixgbe: fix setting of promisc mode when using mac-vlans

Introduce uc_set_promisc flag to fix enabling of promisc mode
when exceeding the number of supported RAR entries.

Issue discovered by Ben Greear when using mac-vlans.

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 6eb5814..753f2ab 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1392,14 +1392,17 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw,
                        fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
                        fctrl |= IXGBE_FCTRL_UPE;
                        IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+                       hw->addr_ctrl.uc_set_promisc = true;
                }
        } else {
                /* only disable if set by overflow, not by user */
-               if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
+               if ((old_promisc_setting && hw->addr_ctrl.uc_set_promisc) &&
+                  !(hw->addr_ctrl.user_set_promisc)) {
                        hw_dbg(hw, " Leaving address overflow promisc mode\n");
                        fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
                        fctrl &= ~IXGBE_FCTRL_UPE;
                        IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+                       hw->addr_ctrl.uc_set_promisc = false;
                }
        }
 

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index d1a1868..15032c7 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2952,7 +2952,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
        fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
 
        if (netdev->flags & IFF_PROMISC) {
-               hw->addr_ctrl.user_set_promisc = 1;
+               hw->addr_ctrl.user_set_promisc = true;
                fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
                /* don't hardware filter vlans in promisc mode */
                ixgbe_vlan_filter_disable(adapter);
@@ -2960,11 +2960,11 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
                if (netdev->flags & IFF_ALLMULTI) {
                        fctrl |= IXGBE_FCTRL_MPE;
                        fctrl &= ~IXGBE_FCTRL_UPE;
-               } else {
+               } else if (!hw->addr_ctrl.uc_set_promisc) {
                        fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
                }
                ixgbe_vlan_filter_enable(adapter);
-               hw->addr_ctrl.user_set_promisc = 0;
+               hw->addr_ctrl.user_set_promisc = false;
        }
 
        IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);

diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 4277cbb..8fc59ac 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -2268,6 +2268,7 @@ struct ixgbe_addr_filter_info {
        u32 mc_addr_in_rar_count;
        u32 mta_in_use;
        u32 overflow_promisc;
+       bool uc_set_promisc;
        bool user_set_promisc;
 };