return NULL;
}
+
+/*
+ * Extract the DRAM CS base address from selected csrow register.
+ */
+static u64 base_from_dct_base(struct amd64_pvt *pvt, int csrow)
+{
+ return ((u64) (amd64_get_dct_base(pvt, 0, csrow) & pvt->dcsb_base)) <<
+ pvt->dcs_shift;
+}
+
+/*
+ * Extract the mask from the dcsb0[csrow] entry in a CPU revision-specific way.
+ */
+static u64 mask_from_dct_mask(struct amd64_pvt *pvt, int csrow)
+{
+ u64 dcsm_bits, other_bits;
+ u64 mask;
+
+ /* Extract bits from DRAM CS Mask. */
+ dcsm_bits = amd64_get_dct_mask(pvt, 0, csrow) & pvt->dcsm_mask;
+
+ other_bits = pvt->dcsm_mask;
+ other_bits = ~(other_bits << pvt->dcs_shift);
+
+ /*
+ * The extracted bits from DCSM belong in the spaces represented by
+ * the cleared bits in other_bits.
+ */
+ mask = (dcsm_bits << pvt->dcs_shift) | other_bits;
+
+ return mask;
+}
+
+/*
+ * @input_addr is an InputAddr associated with the node given by mci. Return the
+ * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr).
+ */
+static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr)
+{
+ struct amd64_pvt *pvt;
+ int csrow;
+ u64 base, mask;
+
+ pvt = mci->pvt_info;
+
+ /*
+ * Here we use the DRAM CS Base and DRAM CS Mask registers. For each CS
+ * base/mask register pair, test the condition shown near the start of
+ * section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
+ */
+ for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+
+ /* This DRAM chip select is disabled on this node */
+ if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
+ continue;
+
+ base = base_from_dct_base(pvt, csrow);
+ mask = ~mask_from_dct_mask(pvt, csrow);
+
+ if ((input_addr & mask) == (base & mask)) {
+ debugf2("InputAddr 0x%lx matches csrow %d (node %d)\n",
+ (unsigned long)input_addr, csrow,
+ pvt->mc_node_id);
+
+ return csrow;
+ }
+ }
+
+ debugf2("no matching csrow for InputAddr 0x%lx (MC node %d)\n",
+ (unsigned long)input_addr, pvt->mc_node_id);
+
+ return -1;
+}
+
+/*
+ * Return the base value defined by the DRAM Base register for the node
+ * represented by mci. This function returns the full 40-bit value despite the
+ * fact that the register only stores bits 39-24 of the value. See section
+ * 3.4.4.1 (BKDG #26094, K8, revA-E)
+ */
+static inline u64 get_dram_base(struct mem_ctl_info *mci)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+
+ return pvt->dram_base[pvt->mc_node_id];
+}
+
+/*
+ * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094)
+ * for the node represented by mci. Info is passed back in *hole_base,
+ * *hole_offset, and *hole_size. Function returns 0 if info is valid or 1 if
+ * info is invalid. Info may be invalid for either of the following reasons:
+ *
+ * - The revision of the node is not E or greater. In this case, the DRAM Hole
+ * Address Register does not exist.
+ *
+ * - The DramHoleValid bit is cleared in the DRAM Hole Address Register,
+ * indicating that its contents are not valid.
+ *
+ * The values passed back in *hole_base, *hole_offset, and *hole_size are
+ * complete 32-bit values despite the fact that the bitfields in the DHAR
+ * only represent bits 31-24 of the base and offset values.
+ */
+int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
+ u64 *hole_offset, u64 *hole_size)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+ u64 base;
+
+ /* only revE and later have the DRAM Hole Address Register */
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_E) {
+ debugf1(" revision %d for node %d does not support DHAR\n",
+ pvt->ext_model, pvt->mc_node_id);
+ return 1;
+ }
+
+ /* only valid for Fam10h */
+ if (boot_cpu_data.x86 == 0x10 &&
+ (pvt->dhar & F10_DRAM_MEM_HOIST_VALID) == 0) {
+ debugf1(" Dram Memory Hoisting is DISABLED on this system\n");
+ return 1;
+ }
+
+ if ((pvt->dhar & DHAR_VALID) == 0) {
+ debugf1(" Dram Memory Hoisting is DISABLED on this node %d\n",
+ pvt->mc_node_id);
+ return 1;
+ }
+
+ /* This node has Memory Hoisting */
+
+ /* +------------------+--------------------+--------------------+-----
+ * | memory | DRAM hole | relocated |
+ * | [0, (x - 1)] | [x, 0xffffffff] | addresses from |
+ * | | | DRAM hole |
+ * | | | [0x100000000, |
+ * | | | (0x100000000+ |
+ * | | | (0xffffffff-x))] |
+ * +------------------+--------------------+--------------------+-----
+ *
+ * Above is a diagram of physical memory showing the DRAM hole and the
+ * relocated addresses from the DRAM hole. As shown, the DRAM hole
+ * starts at address x (the base address) and extends through address
+ * 0xffffffff. The DRAM Hole Address Register (DHAR) relocates the
+ * addresses in the hole so that they start at 0x100000000.
+ */
+
+ base = dhar_base(pvt->dhar);
+
+ *hole_base = base;
+ *hole_size = (0x1ull << 32) - base;
+
+ if (boot_cpu_data.x86 > 0xf)
+ *hole_offset = f10_dhar_offset(pvt->dhar);
+ else
+ *hole_offset = k8_dhar_offset(pvt->dhar);
+
+ debugf1(" DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n",
+ pvt->mc_node_id, (unsigned long)*hole_base,
+ (unsigned long)*hole_offset, (unsigned long)*hole_size);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(amd64_get_dram_hole_info);
+
+
git.openpandora.org / pandora-kernel.git / commitdiff