Blackfin: move SPORT UART resources to boards files

Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file.  This lets people easily select the specific pins/ports for
the normal emulated UART as well as GPIOs for CTS/RTS.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0d1b021..06e4316 100644 (file)
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -562,16 +562,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -678,9 +737,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 2d93c1f..3543bdf 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -800,16 +800,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -926,9 +985,13 @@ static struct platform_device *cmbf527_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,

diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 3a981e8..a99955d 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -631,16 +631,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -766,9 +825,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 0750e65..f93323d 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -844,16 +844,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -1007,9 +1066,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,

diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 50ce3ec..4d92946 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -270,16 +270,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -385,9 +444,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,

diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index f707faf..33ff27a 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -317,16 +317,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 static struct resource isp1362_hcd_resources[] = {
@@ -473,9 +532,13 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
        &rtc_device,

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 2683e5f..428f724 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -397,16 +397,75 @@ static struct platform_device bfin_sir0_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
@@ -536,9 +595,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index abb32dd..b483777 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -526,16 +526,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -647,9 +706,13 @@ static struct platform_device *cm_bf537e_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
        &isp1362_hcd_device,

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index b3182fa..c6802be 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -491,16 +491,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -612,9 +671,13 @@ static struct platform_device *cm_bf537u_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
        &isp1362_hcd_device,

diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 58d6a20..6403964 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -377,16 +377,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 static struct platform_device *minotaur_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
@@ -433,9 +492,13 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 };
 

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 554f82d..df4b6b5 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1677,16 +1677,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
@@ -1867,9 +1926,13 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
        &bfin_pata_device,
@@ -1895,10 +1958,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 static int __init stamp_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-       i2c_register_board_info(0, bfin_i2c_board_info,
-                               ARRAY_SIZE(bfin_i2c_board_info));
        bfin_plat_nand_init();
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+       i2c_register_board_info(0, bfin_i2c_board_info,
+                               ARRAY_SIZE(bfin_i2c_board_info));
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
        return 0;

diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index d77ca5b..69a2fb8 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -493,16 +493,75 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
 static struct platform_device bfin_sport0_uart_device = {
        .name = "bfin-sport-uart",
        .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
 };
 
 static struct platform_device bfin_sport1_uart_device = {
        .name = "bfin-sport-uart",
        .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
 };
 #endif
+#endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
@@ -614,9 +673,13 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
        &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
        &bfin_sport1_uart_device,
 #endif
+#endif
 
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
        &isp1362_hcd_device,

diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 1912bc4..d7c6b9f 100644 (file)
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -262,6 +262,145 @@ static struct platform_device bfin_sir2_device = {
 #endif
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+       {
+               .start = SPORT2_TCR1,
+               .end = SPORT2_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT2_RX,
+               .end = IRQ_SPORT2_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT2_ERROR,
+               .end = IRQ_SPORT2_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+       P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+       P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 2,
+       .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+       .resource = bfin_sport2_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+       {
+               .start = SPORT3_TCR1,
+               .end = SPORT3_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT3_RX,
+               .end = IRQ_SPORT3_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT3_ERROR,
+               .end = IRQ_SPORT3_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+       P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+       P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 3,
+       .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+       .resource = bfin_sport3_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 unsigned short bfin_can_peripherals[] = {
        P_CAN0_RX, P_CAN0_TX, 0
@@ -767,6 +906,21 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+       &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+       &bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+       &bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+       &bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
        &bfin_can_device,
 #endif

diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 635f927..cb74587 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -526,6 +526,145 @@ static struct platform_device musb_device = {
 };
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+       {
+               .start = SPORT2_TCR1,
+               .end = SPORT2_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT2_RX,
+               .end = IRQ_SPORT2_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT2_ERROR,
+               .end = IRQ_SPORT2_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+       P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+       P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 2,
+       .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+       .resource = bfin_sport2_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+       {
+               .start = SPORT3_TCR1,
+               .end = SPORT3_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT3_RX,
+               .end = IRQ_SPORT3_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT3_ERROR,
+               .end = IRQ_SPORT3_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+       P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+       P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 3,
+       .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+       .resource = bfin_sport3_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 static struct resource bfin_atapi_resources[] = {
        {
@@ -960,6 +1099,21 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
        &musb_device,
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+       &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+       &bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+       &bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+       &bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
        &bfin_atapi_device,
 #endif

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 1ed0261..97033fe 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -631,6 +631,145 @@ static struct platform_device musb_device = {
 };
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+       {
+               .start = SPORT0_TCR1,
+               .end = SPORT0_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT0_RX,
+               .end = IRQ_SPORT0_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT0_ERROR,
+               .end = IRQ_SPORT0_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+       P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+       P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 0,
+       .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+       .resource = bfin_sport0_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+       {
+               .start = SPORT1_TCR1,
+               .end = SPORT1_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT1_RX,
+               .end = IRQ_SPORT1_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT1_ERROR,
+               .end = IRQ_SPORT1_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+       P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+       P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 1,
+       .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+       .resource = bfin_sport1_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+static struct resource bfin_sport2_uart_resources[] = {
+       {
+               .start = SPORT2_TCR1,
+               .end = SPORT2_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT2_RX,
+               .end = IRQ_SPORT2_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT2_ERROR,
+               .end = IRQ_SPORT2_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport2_peripherals[] = {
+       P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
+       P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
+};
+
+static struct platform_device bfin_sport2_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 2,
+       .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
+       .resource = bfin_sport2_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport2_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+static struct resource bfin_sport3_uart_resources[] = {
+       {
+               .start = SPORT3_TCR1,
+               .end = SPORT3_MRCS3+4,
+               .flags = IORESOURCE_MEM,
+       },
+       {
+               .start = IRQ_SPORT3_RX,
+               .end = IRQ_SPORT3_RX+1,
+               .flags = IORESOURCE_IRQ,
+       },
+       {
+               .start = IRQ_SPORT3_ERROR,
+               .end = IRQ_SPORT3_ERROR,
+               .flags = IORESOURCE_IRQ,
+       },
+};
+
+unsigned short bfin_sport3_peripherals[] = {
+       P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
+       P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
+};
+
+static struct platform_device bfin_sport3_uart_device = {
+       .name = "bfin-sport-uart",
+       .id = 3,
+       .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
+       .resource = bfin_sport3_uart_resources,
+       .dev = {
+               .platform_data = &bfin_sport3_peripherals, /* Passed to driver */
+       },
+};
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 unsigned short bfin_can_peripherals[] = {
        P_CAN0_RX, P_CAN0_TX, 0
@@ -1172,6 +1311,21 @@ static struct platform_device *ezkit_devices[] __initdata = {
        &bfin_isp1760_device,
 #endif
 
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+       &bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+       &bfin_sport1_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
+       &bfin_sport2_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
+       &bfin_sport3_uart_device,
+#endif
+#endif
+
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
        &bfin_can_device,
 #endif