[PATCH] cciss: new disk register/deregister routines
authorMike Miller <mike.miller@hp.com>
Tue, 13 Sep 2005 08:25:22 +0000 (01:25 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Tue, 13 Sep 2005 15:22:30 +0000 (08:22 -0700)
This patch removes a couple of functions dealing with configuration and
replaces them with new functions.  This implementation fixes some bugs
associated with the ACUXE.  It also allows a logical volume to be removed from
the middle without deleting all volumes behind it.

If a user has 5 logical volumes and decides he wants to reconfigure volume
number 3, he can now do that without removing volumes 4 & 5 first.  This code
has been tested in our labs against all application software.

Signed-off-by: Chase Maupin <chase.maupin@hp.com>
Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/block/cciss.c
drivers/block/cciss.h

index 8bcd6c4..3c6a6a2 100644 (file)
@@ -155,15 +155,24 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 
 static int revalidate_allvol(ctlr_info_t *host);
 static int cciss_revalidate(struct gendisk *disk);
-static int deregister_disk(struct gendisk *disk);
-static int register_new_disk(ctlr_info_t *h);
+static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
+static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, int clear_all);
 
+static void cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
+       int withirq, unsigned int *total_size, unsigned int *block_size);
+static void cciss_geometry_inquiry(int ctlr, int logvol,
+                       int withirq, unsigned int total_size,
+                       unsigned int block_size, InquiryData_struct *inq_buff,
+                       drive_info_struct *drv);
 static void cciss_getgeometry(int cntl_num);
 
 static void start_io( ctlr_info_t *h);
 static int sendcmd( __u8 cmd, int ctlr, void *buff, size_t size,
        unsigned int use_unit_num, unsigned int log_unit, __u8 page_code,
        unsigned char *scsi3addr, int cmd_type);
+static int sendcmd_withirq(__u8        cmd, int ctlr, void *buff, size_t size,
+       unsigned int use_unit_num, unsigned int log_unit, __u8  page_code,
+       int cmd_type);
 
 #ifdef CONFIG_PROC_FS
 static int cciss_proc_get_info(char *buffer, char **start, off_t offset, 
@@ -280,7 +289,7 @@ static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
        for(i=0; i<=h->highest_lun; i++) {
 
                 drv = &h->drv[i];
-               if (drv->block_size == 0)
+               if (drv->heads == 0)
                        continue;
 
                vol_sz = drv->nr_blocks;
@@ -471,6 +480,8 @@ static int cciss_open(struct inode *inode, struct file *filep)
        if (host->busy_initializing)
                return -EBUSY;
 
+       if (host->busy_initializing || drv->busy_configuring)
+               return -EBUSY;
        /*
         * Root is allowed to open raw volume zero even if it's not configured
         * so array config can still work. Root is also allowed to open any
@@ -814,10 +825,10 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
                return(0);
        }
        case CCISS_DEREGDISK:
-               return deregister_disk(disk);
+               return rebuild_lun_table(host, disk);
 
        case CCISS_REGNEWD:
-               return register_new_disk(host);
+               return rebuild_lun_table(host, NULL);
 
        case CCISS_PASSTHRU:
        {
@@ -1161,48 +1172,323 @@ static int revalidate_allvol(ctlr_info_t *host)
         return 0;
 }
 
-static int deregister_disk(struct gendisk *disk)
+/* This function will check the usage_count of the drive to be updated/added.
+ * If the usage_count is zero then the drive information will be updated and
+ * the disk will be re-registered with the kernel.  If not then it will be
+ * left alone for the next reboot.  The exception to this is disk 0 which
+ * will always be left registered with the kernel since it is also the
+ * controller node.  Any changes to disk 0 will show up on the next
+ * reboot.
+*/
+static void cciss_update_drive_info(int ctlr, int drv_index)
+  {
+       ctlr_info_t *h = hba[ctlr];
+       struct gendisk *disk;
+       ReadCapdata_struct *size_buff = NULL;
+       InquiryData_struct *inq_buff = NULL;
+       unsigned int block_size;
+       unsigned int total_size;
+       unsigned long flags = 0;
+       int ret = 0;
+
+       /* if the disk already exists then deregister it before proceeding*/
+       if (h->drv[drv_index].raid_level != -1){
+               spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+               h->drv[drv_index].busy_configuring = 1;
+               spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+               ret = deregister_disk(h->gendisk[drv_index],
+                       &h->drv[drv_index], 0);
+               h->drv[drv_index].busy_configuring = 0;
+       }
+
+       /* If the disk is in use return */
+       if (ret)
+               return;
+
+
+       /* Get information about the disk and modify the driver sturcture */
+       size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
+        if (size_buff == NULL)
+               goto mem_msg;
+       inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL);
+       if (inq_buff == NULL)
+               goto mem_msg;
+
+       cciss_read_capacity(ctlr, drv_index, size_buff, 1,
+               &total_size, &block_size);
+       cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+               inq_buff, &h->drv[drv_index]);
+
+       ++h->num_luns;
+       disk = h->gendisk[drv_index];
+       set_capacity(disk, h->drv[drv_index].nr_blocks);
+
+
+       /* if it's the controller it's already added */
+       if (drv_index){
+               disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+
+               /* Set up queue information */
+               disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
+               blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
+
+               /* This is a hardware imposed limit. */
+               blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+
+               /* This is a limit in the driver and could be eliminated. */
+               blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+
+               blk_queue_max_sectors(disk->queue, 512);
+
+               disk->queue->queuedata = hba[ctlr];
+
+               blk_queue_hardsect_size(disk->queue,
+                       hba[ctlr]->drv[drv_index].block_size);
+
+               h->drv[drv_index].queue = disk->queue;
+               add_disk(disk);
+       }
+
+freeret:
+       kfree(size_buff);
+       kfree(inq_buff);
+       return;
+mem_msg:
+       printk(KERN_ERR "cciss: out of memory\n");
+       goto freeret;
+}
+
+/* This function will find the first index of the controllers drive array
+ * that has a -1 for the raid_level and will return that index.  This is
+ * where new drives will be added.  If the index to be returned is greater
+ * than the highest_lun index for the controller then highest_lun is set
+ * to this new index.  If there are no available indexes then -1 is returned.
+*/
+static int cciss_find_free_drive_index(int ctlr)
+{
+       int i;
+
+       for (i=0; i < CISS_MAX_LUN; i++){
+               if (hba[ctlr]->drv[i].raid_level == -1){
+                       if (i > hba[ctlr]->highest_lun)
+                               hba[ctlr]->highest_lun = i;
+                       return i;
+               }
+       }
+       return -1;
+}
+
+/* This function will add and remove logical drives from the Logical
+ * drive array of the controller and maintain persistancy of ordering
+ * so that mount points are preserved until the next reboot.  This allows
+ * for the removal of logical drives in the middle of the drive array
+ * without a re-ordering of those drives.
+ * INPUT
+ * h           = The controller to perform the operations on
+ * del_disk    = The disk to remove if specified.  If the value given
+ *               is NULL then no disk is removed.
+*/
+static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
 {
+       int ctlr = h->ctlr;
+       int num_luns;
+       ReportLunData_struct *ld_buff = NULL;
+       drive_info_struct *drv = NULL;
+       int return_code;
+       int listlength = 0;
+       int i;
+       int drv_found;
+       int drv_index = 0;
+       __u32 lunid = 0;
        unsigned long flags;
+
+       /* Set busy_configuring flag for this operation */
+       spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+       if (h->num_luns >= CISS_MAX_LUN){
+               spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+               return -EINVAL;
+       }
+
+       if (h->busy_configuring){
+               spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+               return -EBUSY;
+       }
+       h->busy_configuring = 1;
+
+       /* if del_disk is NULL then we are being called to add a new disk
+        * and update the logical drive table.  If it is not NULL then
+        * we will check if the disk is in use or not.
+        */
+       if (del_disk != NULL){
+               drv = get_drv(del_disk);
+               drv->busy_configuring = 1;
+               spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+               return_code = deregister_disk(del_disk, drv, 1);
+               drv->busy_configuring = 0;
+               h->busy_configuring = 0;
+               return return_code;
+       } else {
+               spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+               if (!capable(CAP_SYS_RAWIO))
+                       return -EPERM;
+
+               ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+               if (ld_buff == NULL)
+                       goto mem_msg;
+
+               return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+                               sizeof(ReportLunData_struct), 0, 0, 0,
+                               TYPE_CMD);
+
+               if (return_code == IO_OK){
+                       listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
+                       listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
+                       listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
+                       listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
+               } else{ /* reading number of logical volumes failed */
+                       printk(KERN_WARNING "cciss: report logical volume"
+                               " command failed\n");
+                       listlength = 0;
+                       goto freeret;
+               }
+
+               num_luns = listlength / 8;      /* 8 bytes per entry */
+               if (num_luns > CISS_MAX_LUN){
+                       num_luns = CISS_MAX_LUN;
+                       printk(KERN_WARNING "cciss: more luns configured"
+                               " on controller than can be handled by"
+                               " this driver.\n");
+               }
+
+               /* Compare controller drive array to drivers drive array.
+               * Check for updates in the drive information and any new drives
+               * on the controller.
+               */
+               for (i=0; i < num_luns; i++){
+                       int j;
+
+                       drv_found = 0;
+
+                       lunid = (0xff &
+                               (unsigned int)(ld_buff->LUN[i][3])) << 24;
+                       lunid |= (0xff &
+                               (unsigned int)(ld_buff->LUN[i][2])) << 16;
+                       lunid |= (0xff &
+                               (unsigned int)(ld_buff->LUN[i][1])) << 8;
+                       lunid |= 0xff &
+                               (unsigned int)(ld_buff->LUN[i][0]);
+
+                       /* Find if the LUN is already in the drive array
+                        * of the controller.  If so then update its info
+                        * if not is use.  If it does not exist then find
+                        * the first free index and add it.
+                       */
+                       for (j=0; j <= h->highest_lun; j++){
+                               if (h->drv[j].LunID == lunid){
+                                       drv_index = j;
+                                       drv_found = 1;
+                               }
+                       }
+
+                       /* check if the drive was found already in the array */
+                       if (!drv_found){
+                               drv_index = cciss_find_free_drive_index(ctlr);
+                               if (drv_index == -1)
+                                       goto freeret;
+
+                       }
+                       h->drv[drv_index].LunID = lunid;
+                       cciss_update_drive_info(ctlr, drv_index);
+               } /* end for */
+       } /* end else */
+
+freeret:
+       kfree(ld_buff);
+       h->busy_configuring = 0;
+       /* We return -1 here to tell the ACU that we have registered/updated
+        * all of the drives that we can and to keep it from calling us
+        * additional times.
+       */
+       return -1;
+mem_msg:
+       printk(KERN_ERR "cciss: out of memory\n");
+       goto freeret;
+}
+
+/* This function will deregister the disk and it's queue from the
+ * kernel.  It must be called with the controller lock held and the
+ * drv structures busy_configuring flag set.  It's parameters are:
+ *
+ * disk = This is the disk to be deregistered
+ * drv  = This is the drive_info_struct associated with the disk to be
+ *        deregistered.  It contains information about the disk used
+ *        by the driver.
+ * clear_all = This flag determines whether or not the disk information
+ *             is going to be completely cleared out and the highest_lun
+ *             reset.  Sometimes we want to clear out information about
+ *             the disk in preperation for re-adding it.  In this case
+ *             the highest_lun should be left unchanged and the LunID
+ *             should not be cleared.
+*/
+static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
+                          int clear_all)
+{
        ctlr_info_t *h = get_host(disk);
-       drive_info_struct *drv = get_drv(disk);
-       int ctlr = h->ctlr;
 
        if (!capable(CAP_SYS_RAWIO))
                return -EPERM;
 
-       spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
        /* make sure logical volume is NOT is use */
-       if( drv->usage_count > 1) {
-               spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+       if(clear_all || (h->gendisk[0] == disk)) {
+       if (drv->usage_count > 1)
                 return -EBUSY;
        }
-       drv->usage_count++;
-       spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+        else
+               if( drv->usage_count > 0 )
+                       return -EBUSY;
 
-       /* invalidate the devices and deregister the disk */ 
-       if (disk->flags & GENHD_FL_UP)
+       /* invalidate the devices and deregister the disk.  If it is disk
+        * zero do not deregister it but just zero out it's values.  This
+        * allows us to delete disk zero but keep the controller registered.
+       */
+       if (h->gendisk[0] != disk){
+               if (disk->flags & GENHD_FL_UP){
+                       blk_cleanup_queue(disk->queue);
                del_gendisk(disk);
+                       drv->queue = NULL;
+               }
+       }
+
+       --h->num_luns;
+       /* zero out the disk size info */
+       drv->nr_blocks = 0;
+       drv->block_size = 0;
+       drv->heads = 0;
+       drv->sectors = 0;
+       drv->cylinders = 0;
+       drv->raid_level = -1;   /* This can be used as a flag variable to
+                                * indicate that this element of the drive
+                                * array is free.
+                               */
+
+       if (clear_all){
        /* check to see if it was the last disk */
        if (drv == h->drv + h->highest_lun) {
                /* if so, find the new hightest lun */
                int i, newhighest =-1;
                for(i=0; i<h->highest_lun; i++) {
                        /* if the disk has size > 0, it is available */
-                       if (h->drv[i].nr_blocks)
+                               if (h->drv[i].heads)
                                newhighest = i;
                }
                h->highest_lun = newhighest;
-                               
        }
-       --h->num_luns;
-       /* zero out the disk size info */ 
-       drv->nr_blocks = 0;
-       drv->block_size = 0;
-       drv->cylinders = 0;
+
        drv->LunID = 0;
+       }
        return(0);
 }
+
 static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
        size_t size,
        unsigned int use_unit_num, /* 0: address the controller,
@@ -1513,164 +1799,6 @@ cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
        return;
 }
 
-static int register_new_disk(ctlr_info_t *h)
-{
-        struct gendisk *disk;
-       int ctlr = h->ctlr;
-        int i;
-       int num_luns;
-       int logvol;
-       int new_lun_found = 0;
-       int new_lun_index = 0;
-       int free_index_found = 0;
-       int free_index = 0;
-       ReportLunData_struct *ld_buff = NULL;
-       ReadCapdata_struct *size_buff = NULL;
-       InquiryData_struct *inq_buff = NULL;
-       int return_code;
-       int listlength = 0;
-       __u32 lunid = 0;
-       unsigned int block_size;
-       unsigned int total_size;
-
-        if (!capable(CAP_SYS_RAWIO))
-                return -EPERM;
-       /* if we have no space in our disk array left to add anything */
-       if(  h->num_luns >= CISS_MAX_LUN)
-               return -EINVAL;
-       
-       ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
-       if (ld_buff == NULL)
-               goto mem_msg;
-       memset(ld_buff, 0, sizeof(ReportLunData_struct));
-       size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
-        if (size_buff == NULL)
-               goto mem_msg;
-       inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL);
-        if (inq_buff == NULL)
-               goto mem_msg;
-       
-       return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, 
-                       sizeof(ReportLunData_struct), 0, 0, 0, TYPE_CMD);
-
-       if( return_code == IO_OK)
-       {
-               
-               // printk("LUN Data\n--------------------------\n");
-
-               listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
-               listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
-               listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;  
-               listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
-       } else /* reading number of logical volumes failed */
-       {
-               printk(KERN_WARNING "cciss: report logical volume"
-                       " command failed\n");
-               listlength = 0;
-               goto free_err;
-       }
-       num_luns = listlength / 8; // 8 bytes pre entry
-       if (num_luns > CISS_MAX_LUN)
-       {
-               num_luns = CISS_MAX_LUN;
-       }
-#ifdef CCISS_DEBUG
-       printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", ld_buff->LUNListLength[0],
-               ld_buff->LUNListLength[1], ld_buff->LUNListLength[2],
-               ld_buff->LUNListLength[3],  num_luns);
-#endif 
-       for(i=0; i<  num_luns; i++)
-       {
-               int j;
-               int lunID_found = 0;
-
-               lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24;
-               lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16;
-               lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8;
-               lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-               
-               /* check to see if this is a new lun */ 
-               for(j=0; j <= h->highest_lun; j++)
-               {
-#ifdef CCISS_DEBUG
-                       printk("Checking %d %x against %x\n", j,h->drv[j].LunID,
-                                               lunid);
-#endif /* CCISS_DEBUG */
-                       if (h->drv[j].LunID == lunid)
-                       {
-                               lunID_found = 1;
-                               break;
-                       }
-                       
-               }
-               if( lunID_found == 1)
-                       continue;
-               else
-               {       /* It is the new lun we have been looking for */
-#ifdef CCISS_DEBUG
-                       printk("new lun found at %d\n", i);
-#endif /* CCISS_DEBUG */
-                       new_lun_index = i;
-                       new_lun_found = 1;
-                       break;  
-               }
-        }
-        if (!new_lun_found)
-        {
-               printk(KERN_WARNING "cciss:  New Logical Volume not found\n");
-               goto free_err;
-        }
-        /* Now find the free index     */
-       for(i=0; i <CISS_MAX_LUN; i++)
-       {
-#ifdef CCISS_DEBUG
-               printk("Checking Index %d\n", i);
-#endif /* CCISS_DEBUG */
-               if(h->drv[i].LunID == 0)
-               {
-#ifdef CCISS_DEBUG
-                       printk("free index found at %d\n", i);
-#endif /* CCISS_DEBUG */
-                       free_index_found = 1;
-                       free_index = i;
-                       break;
-               }
-       }
-       if (!free_index_found)
-       {
-               printk(KERN_WARNING "cciss: unable to find free slot for disk\n");
-               goto free_err;
-         }
-
-       logvol = free_index;
-       h->drv[logvol].LunID = lunid;
-               /* there could be gaps in lun numbers, track hightest */
-       if(h->highest_lun < lunid)
-               h->highest_lun = logvol;
-       cciss_read_capacity(ctlr, logvol, size_buff, 1,
-               &total_size, &block_size);
-       cciss_geometry_inquiry(ctlr, logvol, 1, total_size, block_size,
-                       inq_buff, &h->drv[logvol]);
-       h->drv[logvol].usage_count = 0;
-       ++h->num_luns;
-       /* setup partitions per disk */
-        disk = h->gendisk[logvol];
-       set_capacity(disk, h->drv[logvol].nr_blocks);
-       /* if it's the controller it's already added */
-       if(logvol)
-               add_disk(disk);
-freeret:
-       kfree(ld_buff);
-       kfree(size_buff);
-       kfree(inq_buff);
-       return (logvol);
-mem_msg:
-       printk(KERN_ERR "cciss: out of memory\n");
-free_err:
-       logvol = -1;
-       goto freeret;
-}
-
 static int cciss_revalidate(struct gendisk *disk)
 {
        ctlr_info_t *h = get_host(disk);
@@ -2652,12 +2780,16 @@ static void cciss_getgeometry(int cntl_num)
 #endif /* CCISS_DEBUG */
 
        hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns-1;
-       for(i=0; i<  hba[cntl_num]->num_luns; i++)
+//     for(i=0; i<  hba[cntl_num]->num_luns; i++)
+       for(i=0; i < CISS_MAX_LUN; i++)
        {
-
-               lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) << 24;
-               lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) << 16;
-               lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) << 8;
+               if (i < hba[cntl_num]->num_luns){
+                       lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
+                                << 24;
+                       lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
+                                << 16;
+                       lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
+                                << 8;
                lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
                
                hba[cntl_num]->drv[i].LunID = lunid;
@@ -2665,13 +2797,18 @@ static void cciss_getgeometry(int cntl_num)
 
 #ifdef CCISS_DEBUG
                printk(KERN_DEBUG "LUN[%d]:  %x %x %x %x = %x\n", i, 
-               ld_buff->LUN[i][0], ld_buff->LUN[i][1],ld_buff->LUN[i][2], 
-               ld_buff->LUN[i][3], hba[cntl_num]->drv[i].LunID);
+                       ld_buff->LUN[i][0], ld_buff->LUN[i][1],
+                       ld_buff->LUN[i][2], ld_buff->LUN[i][3],
+                       hba[cntl_num]->drv[i].LunID);
 #endif /* CCISS_DEBUG */
                cciss_read_capacity(cntl_num, i, size_buff, 0,
                        &total_size, &block_size);
-               cciss_geometry_inquiry(cntl_num, i, 0, total_size, block_size,
-                       inq_buff, &hba[cntl_num]->drv[i]);
+                       cciss_geometry_inquiry(cntl_num, i, 0, total_size,
+                               block_size, inq_buff, &hba[cntl_num]->drv[i]);
+               } else {
+                       /* initialize raid_level to indicate a free space */
+                       hba[cntl_num]->drv[i].raid_level = -1;
+               }
        }
        kfree(ld_buff);
        kfree(size_buff);
index 11ee835..dec27a9 100644 (file)
@@ -35,7 +35,13 @@ typedef struct _drive_info_struct
        int     heads;
        int     sectors;
        int     cylinders;
-       int     raid_level;
+       int     raid_level; /* set to -1 to indicate that
+                            * the drive is not in use/configured
+                           */
+       int     busy_configuring; /*This is set when the drive is being removed
+                                  *to prevent it from being opened or it's queue
+                                  *from being started.
+                                 */
 } drive_info_struct;
 
 struct ctlr_info