[PATCH] ahci: clean up AHCI constants in preparation for NCQ

* Rename CMD_TBL_HDR to CMD_TBL_HDR_SZ as it's size not offset.

* Define MAX_CMDS and CMD_SZ and use them in calculation of other
  constants.

* Define CMD_TBL_AR_SZ as product of CMD_TBL_SZ and MAX_CMDS, and use
  it when calculating PRIV_DMA_SZ.

* CMD_SLOT_SZ is also dependent on MAX_CMDS but hasn't been changed
  because I didn't want to change the value used by the original code
  (32 commands).  Later NCQ change will bump MAX_CMDS to 32 anyway and
  the hard coded 32 can be changed to MAX_CMDS then.

* Reorder HOST_CAP_* flags.

Signed-off-by: Tejun Heo <htejun@gmail.com>

diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index 35487e3..b25373f 100644 (file)
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -56,12 +56,15 @@ enum {
        AHCI_MAX_SG             = 168, /* hardware max is 64K */
        AHCI_DMA_BOUNDARY       = 0xffffffff,
        AHCI_USE_CLUSTERING     = 0,
-       AHCI_CMD_SLOT_SZ        = 32 * 32,
+       AHCI_MAX_CMDS           = 1,
+       AHCI_CMD_SZ             = 32,
+       AHCI_CMD_SLOT_SZ        = 32 * AHCI_CMD_SZ,
        AHCI_RX_FIS_SZ          = 256,
-       AHCI_CMD_TBL_HDR        = 0x80,
        AHCI_CMD_TBL_CDB        = 0x40,
-       AHCI_CMD_TBL_SZ         = AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16),
-       AHCI_PORT_PRIV_DMA_SZ   = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ +
+       AHCI_CMD_TBL_HDR_SZ     = 0x80,
+       AHCI_CMD_TBL_SZ         = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
+       AHCI_CMD_TBL_AR_SZ      = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
+       AHCI_PORT_PRIV_DMA_SZ   = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
                                  AHCI_RX_FIS_SZ,
        AHCI_IRQ_ON_SG          = (1 << 31),
        AHCI_CMD_ATAPI          = (1 << 5),
@@ -89,8 +92,8 @@ enum {
        HOST_AHCI_EN            = (1 << 31), /* AHCI enabled */
 
        /* HOST_CAP bits */
-       HOST_CAP_64             = (1 << 31), /* PCI DAC (64-bit DMA) support */
        HOST_CAP_CLO            = (1 << 24), /* Command List Override support */
+       HOST_CAP_64             = (1 << 31), /* PCI DAC (64-bit DMA) support */
 
        /* registers for each SATA port */
        PORT_LST_ADDR           = 0x00, /* command list DMA addr */
@@ -398,7 +401,7 @@ static int ahci_port_start(struct ata_port *ap)
        pp->cmd_tbl = mem;
        pp->cmd_tbl_dma = mem_dma;
 
-       pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR;
+       pp->cmd_tbl_sg = mem + AHCI_CMD_TBL_HDR_SZ;
 
        ap->private_data = pp;