xhci: change xhci 1.0 only restrictions to support xhci 1.1

Some changes between xhci 0.96 and xhci 1.0 specifications forced us to
check the hci version in code, some of these checks were implemented as
hci_version == 1.0, which will not work with new xhci 1.1 controllers.

xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these
checks to hci_version >= 1.0

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9a8c936..8497fb8 100644 (file)
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1498,10 +1498,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
         * use Event Data TRBs, and we don't chain in a link TRB on short
         * transfers, we're basically dividing by 1.
         *
-        * xHCI 1.0 specification indicates that the Average TRB Length should
-        * be set to 8 for control endpoints.
+        * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
+        * should be set to 8 for control endpoints.
         */
-       if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100)
+       if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
                ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
        else
                ep_ctx->tx_info |=

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1c61e5e..43291f9 100644 (file)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3470,8 +3470,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
        if (start_cycle == 0)
                field |= 0x1;
 
-       /* xHCI 1.0 6.4.1.2.1: Transfer Type field */
-       if (xhci->hci_version == 0x100) {
+       /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
+       if (xhci->hci_version >= 0x100) {
                if (urb->transfer_buffer_length > 0) {
                        if (setup->bRequestType & USB_DIR_IN)
                                field |= TRB_TX_TYPE(TRB_DATA_IN);