--- /dev/null
+What: /sys/class/regulator/.../state
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ state. This holds the regulator output state.
+
+ This will be one of the following strings:
+
+ 'enabled'
+ 'disabled'
+ 'unknown'
+
+ 'enabled' means the regulator output is ON and is supplying
+ power to the system.
+
+ 'disabled' means the regulator output is OFF and is not
+ supplying power to the system..
+
+ 'unknown' means software cannot determine the state.
+
+ NOTE: this field can be used in conjunction with microvolts
+ and microamps to determine regulator output levels.
+
+
+What: /sys/class/regulator/.../type
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ type. This holds the regulator type.
+
+ This will be one of the following strings:
+
+ 'voltage'
+ 'current'
+ 'unknown'
+
+ 'voltage' means the regulator output voltage can be controlled
+ by software.
+
+ 'current' means the regulator output current limit can be
+ controlled by software.
+
+ 'unknown' means software cannot control either voltage or
+ current limit.
+
+
+What: /sys/class/regulator/.../microvolts
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ microvolts. This holds the regulator output voltage setting
+ measured in microvolts (i.e. E-6 Volts).
+
+ NOTE: This value should not be used to determine the regulator
+ output voltage level as this value is the same regardless of
+ whether the regulator is enabled or disabled.
+
+
+What: /sys/class/regulator/.../microamps
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ microamps. This holds the regulator output current limit
+ setting measured in microamps (i.e. E-6 Amps).
+
+ NOTE: This value should not be used to determine the regulator
+ output current level as this value is the same regardless of
+ whether the regulator is enabled or disabled.
+
+
+What: /sys/class/regulator/.../opmode
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ opmode. This holds the regulator operating mode setting.
+
+ The opmode value can be one of the following strings:
+
+ 'fast'
+ 'normal'
+ 'idle'
+ 'standby'
+ 'unknown'
+
+ The modes are described in include/linux/regulator/regulator.h
+
+ NOTE: This value should not be used to determine the regulator
+ output operating mode as this value is the same regardless of
+ whether the regulator is enabled or disabled.
+
+
+What: /sys/class/regulator/.../min_microvolts
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ min_microvolts. This holds the minimum safe working regulator
+ output voltage setting for this domain measured in microvolts.
+
+ NOTE: this will return the string 'constraint not defined' if
+ the power domain has no min microvolts constraint defined by
+ platform code.
+
+
+What: /sys/class/regulator/.../max_microvolts
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ max_microvolts. This holds the maximum safe working regulator
+ output voltage setting for this domain measured in microvolts.
+
+ NOTE: this will return the string 'constraint not defined' if
+ the power domain has no max microvolts constraint defined by
+ platform code.
+
+
+What: /sys/class/regulator/.../min_microamps
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ min_microamps. This holds the minimum safe working regulator
+ output current limit setting for this domain measured in
+ microamps.
+
+ NOTE: this will return the string 'constraint not defined' if
+ the power domain has no min microamps constraint defined by
+ platform code.
+
+
+What: /sys/class/regulator/.../max_microamps
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ max_microamps. This holds the maximum safe working regulator
+ output current limit setting for this domain measured in
+ microamps.
+
+ NOTE: this will return the string 'constraint not defined' if
+ the power domain has no max microamps constraint defined by
+ platform code.
+
+
+What: /sys/class/regulator/.../num_users
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ num_users. This holds the number of consumer devices that
+ have called regulator_enable() on this regulator.
+
+
+What: /sys/class/regulator/.../requested_microamps
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ requested_microamps. This holds the total requested load
+ current in microamps for this regulator from all its consumer
+ devices.
+
+
+What: /sys/class/regulator/.../parent
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Some regulator directories will contain a link called parent.
+ This points to the parent or supply regulator if one exists.
+
+What: /sys/class/regulator/.../suspend_mem_microvolts
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_mem_microvolts. This holds the regulator output
+ voltage setting for this domain measured in microvolts when
+ the system is suspended to memory.
+
+ NOTE: this will return the string 'not defined' if
+ the power domain has no suspend to memory voltage defined by
+ platform code.
+
+What: /sys/class/regulator/.../suspend_disk_microvolts
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_disk_microvolts. This holds the regulator output
+ voltage setting for this domain measured in microvolts when
+ the system is suspended to disk.
+
+ NOTE: this will return the string 'not defined' if
+ the power domain has no suspend to disk voltage defined by
+ platform code.
+
+What: /sys/class/regulator/.../suspend_standby_microvolts
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_standby_microvolts. This holds the regulator output
+ voltage setting for this domain measured in microvolts when
+ the system is suspended to standby.
+
+ NOTE: this will return the string 'not defined' if
+ the power domain has no suspend to standby voltage defined by
+ platform code.
+
+What: /sys/class/regulator/.../suspend_mem_mode
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_mem_mode. This holds the regulator operating mode
+ setting for this domain when the system is suspended to
+ memory.
+
+ NOTE: this will return the string 'not defined' if
+ the power domain has no suspend to memory mode defined by
+ platform code.
+
+What: /sys/class/regulator/.../suspend_disk_mode
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_disk_mode. This holds the regulator operating mode
+ setting for this domain when the system is suspended to disk.
+
+ NOTE: this will return the string 'not defined' if
+ the power domain has no suspend to disk mode defined by
+ platform code.
+
+What: /sys/class/regulator/.../suspend_standby_mode
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_standby_mode. This holds the regulator operating mode
+ setting for this domain when the system is suspended to
+ standby.
+
+ NOTE: this will return the string 'not defined' if
+ the power domain has no suspend to standby mode defined by
+ platform code.
+
+What: /sys/class/regulator/.../suspend_mem_state
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_mem_state. This holds the regulator operating state
+ when suspended to memory.
+
+ This will be one of the following strings:
+
+ 'enabled'
+ 'disabled'
+ 'not defined'
+
+What: /sys/class/regulator/.../suspend_disk_state
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_disk_state. This holds the regulator operating state
+ when suspended to disk.
+
+ This will be one of the following strings:
+
+ 'enabled'
+ 'disabled'
+ 'not defined'
+
+What: /sys/class/regulator/.../suspend_standby_state
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Description:
+ Each regulator directory will contain a field called
+ suspend_standby_state. This holds the regulator operating
+ state when suspended to standby.
+
+ This will be one of the following strings:
+
+ 'enabled'
+ 'disabled'
+ 'not defined'
charge when battery considered full/empty at given conditions (temperature,
age)". I.e. these attributes represents real thresholds, not design values.
+CHARGE_COUNTER - the current charge counter (in µAh). This could easily
+be negative; there is no empty or full value. It is only useful for
+relative, time-based measurements.
+
ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
CAPACITY - capacity in percents.
--- /dev/null
+Regulator Consumer Driver Interface
+===================================
+
+This text describes the regulator interface for consumer device drivers.
+Please see overview.txt for a description of the terms used in this text.
+
+
+1. Consumer Regulator Access (static & dynamic drivers)
+=======================================================
+
+A consumer driver can get access to it's supply regulator by calling :-
+
+regulator = regulator_get(dev, "Vcc");
+
+The consumer passes in it's struct device pointer and power supply ID. The core
+then finds the correct regulator by consulting a machine specific lookup table.
+If the lookup is successful then this call will return a pointer to the struct
+regulator that supplies this consumer.
+
+To release the regulator the consumer driver should call :-
+
+regulator_put(regulator);
+
+Consumers can be supplied by more than one regulator e.g. codec consumer with
+analog and digital supplies :-
+
+digital = regulator_get(dev, "Vcc"); /* digital core */
+analog = regulator_get(dev, "Avdd"); /* analog */
+
+The regulator access functions regulator_get() and regulator_put() will
+usually be called in your device drivers probe() and remove() respectively.
+
+
+2. Regulator Output Enable & Disable (static & dynamic drivers)
+====================================================================
+
+A consumer can enable it's power supply by calling:-
+
+int regulator_enable(regulator);
+
+NOTE: The supply may already be enabled before regulator_enabled() is called.
+This may happen if the consumer shares the regulator or the regulator has been
+previously enabled by bootloader or kernel board initialization code.
+
+A consumer can determine if a regulator is enabled by calling :-
+
+int regulator_is_enabled(regulator);
+
+This will return > zero when the regulator is enabled.
+
+
+A consumer can disable it's supply when no longer needed by calling :-
+
+int regulator_disable(regulator);
+
+NOTE: This may not disable the supply if it's shared with other consumers. The
+regulator will only be disabled when the enabled reference count is zero.
+
+Finally, a regulator can be forcefully disabled in the case of an emergency :-
+
+int regulator_force_disable(regulator);
+
+NOTE: this will immediately and forcefully shutdown the regulator output. All
+consumers will be powered off.
+
+
+3. Regulator Voltage Control & Status (dynamic drivers)
+======================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+voltage to match system operating points. e.g. CPUfreq drivers can scale
+voltage along with frequency to save power, SD drivers may need to select the
+correct card voltage, etc.
+
+Consumers can control their supply voltage by calling :-
+
+int regulator_set_voltage(regulator, min_uV, max_uV);
+
+Where min_uV and max_uV are the minimum and maximum acceptable voltages in
+microvolts.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the voltage changes instantly, otherwise the voltage
+configuration changes and the voltage is physically set when the regulator is
+next enabled.
+
+The regulators configured voltage output can be found by calling :-
+
+int regulator_get_voltage(regulator);
+
+NOTE: get_voltage() will return the configured output voltage whether the
+regulator is enabled or disabled and should NOT be used to determine regulator
+output state. However this can be used in conjunction with is_enabled() to
+determine the regulator physical output voltage.
+
+
+4. Regulator Current Limit Control & Status (dynamic drivers)
+===========================================================
+
+Some consumer drivers need to be able to dynamically change their supply
+current limit to match system operating points. e.g. LCD backlight driver can
+change the current limit to vary the backlight brightness, USB drivers may want
+to set the limit to 500mA when supplying power.
+
+Consumers can control their supply current limit by calling :-
+
+int regulator_set_current_limit(regulator, min_uV, max_uV);
+
+Where min_uA and max_uA are the minimum and maximum acceptable current limit in
+microamps.
+
+NOTE: this can be called when the regulator is enabled or disabled. If called
+when enabled, then the current limit changes instantly, otherwise the current
+limit configuration changes and the current limit is physically set when the
+regulator is next enabled.
+
+A regulators current limit can be found by calling :-
+
+int regulator_get_current_limit(regulator);
+
+NOTE: get_current_limit() will return the current limit whether the regulator
+is enabled or disabled and should not be used to determine regulator current
+load.
+
+
+5. Regulator Operating Mode Control & Status (dynamic drivers)
+=============================================================
+
+Some consumers can further save system power by changing the operating mode of
+their supply regulator to be more efficient when the consumers operating state
+changes. e.g. consumer driver is idle and subsequently draws less current
+
+Regulator operating mode can be changed indirectly or directly.
+
+Indirect operating mode control.
+--------------------------------
+Consumer drivers can request a change in their supply regulator operating mode
+by calling :-
+
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+This will cause the core to recalculate the total load on the regulator (based
+on all it's consumers) and change operating mode (if necessary and permitted)
+to best match the current operating load.
+
+The load_uA value can be determined from the consumers datasheet. e.g.most
+datasheets have tables showing the max current consumed in certain situations.
+
+Most consumers will use indirect operating mode control since they have no
+knowledge of the regulator or whether the regulator is shared with other
+consumers.
+
+Direct operating mode control.
+------------------------------
+Bespoke or tightly coupled drivers may want to directly control regulator
+operating mode depending on their operating point. This can be achieved by
+calling :-
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+
+Direct mode will only be used by consumers that *know* about the regulator and
+are not sharing the regulator with other consumers.
+
+
+6. Regulator Events
+===================
+Regulators can notify consumers of external events. Events could be received by
+consumers under regulator stress or failure conditions.
+
+Consumers can register interest in regulator events by calling :-
+
+int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+
+Consumers can uregister interest by calling :-
+
+int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+
+Regulators use the kernel notifier framework to send event to thier interested
+consumers.
--- /dev/null
+Regulator Machine Driver Interface
+===================================
+
+The regulator machine driver interface is intended for board/machine specific
+initialisation code to configure the regulator subsystem. Typical things that
+machine drivers would do are :-
+
+ 1. Regulator -> Device mapping.
+ 2. Regulator supply configuration.
+ 3. Power Domain constraint setting.
+
+
+
+1. Regulator -> device mapping
+==============================
+Consider the following machine :-
+
+ Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+ |
+ +-> [Consumer B @ 3.3V]
+
+The drivers for consumers A & B must be mapped to the correct regulator in
+order to control their power supply. This mapping can be achieved in machine
+initialisation code by calling :-
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+ const char *supply);
+
+and is shown with the following code :-
+
+regulator_set_device_supply("Regulator-1", devB, "Vcc");
+regulator_set_device_supply("Regulator-2", devA, "Vcc");
+
+This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
+to the 'Vcc' supply for Consumer A.
+
+
+2. Regulator supply configuration.
+==================================
+Consider the following machine (again) :-
+
+ Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+ |
+ +-> [Consumer B @ 3.3V]
+
+Regulator-1 supplies power to Regulator-2. This relationship must be registered
+with the core so that Regulator-1 is also enabled when Consumer A enables it's
+supply (Regulator-2).
+
+This relationship can be register with the core via :-
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+In this example we would use the following code :-
+
+regulator_set_supply("Regulator-2", "Regulator-1");
+
+Relationships can be queried by calling :-
+
+const char *regulator_get_supply(const char *regulator);
+
+
+3. Power Domain constraint setting.
+===================================
+Each power domain within a system has physical constraints on voltage and
+current. This must be defined in software so that the power domain is always
+operated within specifications.
+
+Consider the following machine (again) :-
+
+ Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
+ |
+ +-> [Consumer B @ 3.3V]
+
+This gives us two regulators and two power domains:
+
+ Domain 1: Regulator-2, Consumer B.
+ Domain 2: Consumer A.
+
+Constraints can be registered by calling :-
+
+int regulator_set_platform_constraints(const char *regulator,
+ struct regulation_constraints *constraints);
+
+The example is defined as follows :-
+
+struct regulation_constraints domain_1 = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+struct regulation_constraints domain_2 = {
+ .min_uV = 1800000,
+ .max_uV = 2000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+};
+
+regulator_set_platform_constraints("Regulator-1", &domain_1);
+regulator_set_platform_constraints("Regulator-2", &domain_2);
--- /dev/null
+Linux voltage and current regulator framework
+=============================================
+
+About
+=====
+
+This framework is designed to provide a standard kernel interface to control
+voltage and current regulators.
+
+The intention is to allow systems to dynamically control regulator power output
+in order to save power and prolong battery life. This applies to both voltage
+regulators (where voltage output is controllable) and current sinks (where
+current limit is controllable).
+
+(C) 2008 Wolfson Microelectronics PLC.
+Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+
+
+Nomenclature
+============
+
+Some terms used in this document:-
+
+ o Regulator - Electronic device that supplies power to other devices.
+ Most regulators can enable and disable their output whilst
+ some can control their output voltage and or current.
+
+ Input Voltage -> Regulator -> Output Voltage
+
+
+ o PMIC - Power Management IC. An IC that contains numerous regulators
+ and often contains other susbsystems.
+
+
+ o Consumer - Electronic device that is supplied power by a regulator.
+ Consumers can be classified into two types:-
+
+ Static: consumer does not change it's supply voltage or
+ current limit. It only needs to enable or disable it's
+ power supply. It's supply voltage is set by the hardware,
+ bootloader, firmware or kernel board initialisation code.
+
+ Dynamic: consumer needs to change it's supply voltage or
+ current limit to meet operation demands.
+
+
+ o Power Domain - Electronic circuit that is supplied it's input power by the
+ output power of a regulator, switch or by another power
+ domain.
+
+ The supply regulator may be behind a switch(s). i.e.
+
+ Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
+ | |
+ | +-> [Consumer B], [Consumer C]
+ |
+ +-> [Consumer D], [Consumer E]
+
+ That is one regulator and three power domains:
+
+ Domain 1: Switch-1, Consumers D & E.
+ Domain 2: Switch-2, Consumers B & C.
+ Domain 3: Consumer A.
+
+ and this represents a "supplies" relationship:
+
+ Domain-1 --> Domain-2 --> Domain-3.
+
+ A power domain may have regulators that are supplied power
+ by other regulators. i.e.
+
+ Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
+ |
+ +-> [Consumer B]
+
+ This gives us two regulators and two power domains:
+
+ Domain 1: Regulator-2, Consumer B.
+ Domain 2: Consumer A.
+
+ and a "supplies" relationship:
+
+ Domain-1 --> Domain-2
+
+
+ o Constraints - Constraints are used to define power levels for performance
+ and hardware protection. Constraints exist at three levels:
+
+ Regulator Level: This is defined by the regulator hardware
+ operating parameters and is specified in the regulator
+ datasheet. i.e.
+
+ - voltage output is in the range 800mV -> 3500mV.
+ - regulator current output limit is 20mA @ 5V but is
+ 10mA @ 10V.
+
+ Power Domain Level: This is defined in software by kernel
+ level board initialisation code. It is used to constrain a
+ power domain to a particular power range. i.e.
+
+ - Domain-1 voltage is 3300mV
+ - Domain-2 voltage is 1400mV -> 1600mV
+ - Domain-3 current limit is 0mA -> 20mA.
+
+ Consumer Level: This is defined by consumer drivers
+ dynamically setting voltage or current limit levels.
+
+ e.g. a consumer backlight driver asks for a current increase
+ from 5mA to 10mA to increase LCD illumination. This passes
+ to through the levels as follows :-
+
+ Consumer: need to increase LCD brightness. Lookup and
+ request next current mA value in brightness table (the
+ consumer driver could be used on several different
+ personalities based upon the same reference device).
+
+ Power Domain: is the new current limit within the domain
+ operating limits for this domain and system state (e.g.
+ battery power, USB power)
+
+ Regulator Domains: is the new current limit within the
+ regulator operating parameters for input/ouput voltage.
+
+ If the regulator request passes all the constraint tests
+ then the new regulator value is applied.
+
+
+Design
+======
+
+The framework is designed and targeted at SoC based devices but may also be
+relevant to non SoC devices and is split into the following four interfaces:-
+
+
+ 1. Consumer driver interface.
+
+ This uses a similar API to the kernel clock interface in that consumer
+ drivers can get and put a regulator (like they can with clocks atm) and
+ get/set voltage, current limit, mode, enable and disable. This should
+ allow consumers complete control over their supply voltage and current
+ limit. This also compiles out if not in use so drivers can be reused in
+ systems with no regulator based power control.
+
+ See Documentation/power/regulator/consumer.txt
+
+ 2. Regulator driver interface.
+
+ This allows regulator drivers to register their regulators and provide
+ operations to the core. It also has a notifier call chain for propagating
+ regulator events to clients.
+
+ See Documentation/power/regulator/regulator.txt
+
+ 3. Machine interface.
+
+ This interface is for machine specific code and allows the creation of
+ voltage/current domains (with constraints) for each regulator. It can
+ provide regulator constraints that will prevent device damage through
+ overvoltage or over current caused by buggy client drivers. It also
+ allows the creation of a regulator tree whereby some regulators are
+ supplied by others (similar to a clock tree).
+
+ See Documentation/power/regulator/machine.txt
+
+ 4. Userspace ABI.
+
+ The framework also exports a lot of useful voltage/current/opmode data to
+ userspace via sysfs. This could be used to help monitor device power
+ consumption and status.
+
+ See Documentation/ABI/testing/regulator-sysfs.txt
--- /dev/null
+Regulator Driver Interface
+==========================
+
+The regulator driver interface is relatively simple and designed to allow
+regulator drivers to register their services with the core framework.
+
+
+Registration
+============
+
+Drivers can register a regulator by calling :-
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+ void *reg_data);
+
+This will register the regulators capabilities and operations the regulator
+core. The core does not touch reg_data (private to regulator driver).
+
+Regulators can be unregistered by calling :-
+
+void regulator_unregister(struct regulator_dev *rdev);
+
+
+Regulator Events
+================
+Regulators can send events (e.g. over temp, under voltage, etc) to consumer
+drivers by calling :-
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+ unsigned long event, void *data);
L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
-S: Maintained
+S: Supported
SUN3/3X
P: Sam Creasey
L: netdev@vger.kernel.org
S: Maintained
+VOLTAGE AND CURRENT REGULATOR FRAMEWORK
+P: Liam Girdwood
+M: lg@opensource.wolfsonmicro.com
+P: Mark Brown
+M: broonie@opensource.wolfsonmicro.com
+W: http://opensource.wolfsonmicro.com/node/15
+T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
+S: Supported
+
VT1211 HARDWARE MONITOR DRIVER
P: Juerg Haefliger
M: juergh@gmail.com
source "drivers/dca/Kconfig"
+source "drivers/regulator/Kconfig"
+
source "drivers/uio/Kconfig"
endmenu
default y
select HAVE_IDE
select HAVE_OPROFILE
+ select HAVE_ARCH_KGDB
# Horrible source of confusion. Die, die, die ...
select EMBEDDED
select RTC_LIB
select SYS_HAS_CPU_RM9000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
help
The eXcite is a smart camera platform manufactured by
Basler Vision Technologies AG.
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
select IRQ_CPU
select SERIAL_8250
select SERIAL_8250_CONSOLE
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_SMP
help
Yosemite is an evaluation board for the RM9000x2 processor
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_SMP
select GENERIC_HARDIRQS_NO__DO_IRQ
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
- select SYS_SUPPORTS_KGDB
select SYS_SUPPORTS_LITTLE_ENDIAN
select ZONE_DMA32 if 64BIT
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select GENERIC_HARDIRQS_NO__DO_IRQ
- select SYS_SUPPORTS_KGDB
select GENERIC_GPIO
config SWAP_IO_SPACE
arch/mips/kernel/smtc.c. This debugging option result in significant
overhead so should be disabled in production kernels.
-config KGDB
- bool "Remote GDB kernel debugging"
- depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
- select DEBUG_INFO
- help
- If you say Y here, it will be possible to remotely debug the MIPS
- kernel using gdb. This enlarges your kernel image disk size by
- several megabytes and requires a machine with more than 16 MB,
- better 32 MB RAM to avoid excessive linking time. This is only
- useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
- bool
-
-config GDB_CONSOLE
- bool "Console output to GDB"
- depends on KGDB
- help
- If you are using GDB for remote debugging over a serial port and
- would like kernel messages to be formatted into GDB $O packets so
- that GDB prints them as program output, say 'Y'.
-
config SB1XXX_CORELIS
bool "Corelis Debugger"
depends on SIBYTE_SB1xxx_SOC
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
- select SYS_SUPPORTS_KGDB
au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
sleeper.o cputable.o dma.o dbdma.o gpio.o
-obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_PCI) += pci.o
EXTRA_CFLAGS += -Werror
+++ /dev/null
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE UART_DEBUG_BASE
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-
-#define UART_RX 0 /* Receive buffer */
-#define UART_TX 4 /* Transmit buffer */
-#define UART_IER 8 /* Interrupt Enable Register */
-#define UART_IIR 0xC /* Interrupt ID Register */
-#define UART_FCR 0x10 /* FIFO Control Register */
-#define UART_LCR 0x14 /* Line Control Register */
-#define UART_MCR 0x18 /* Modem Control Register */
-#define UART_LSR 0x1C /* Line Status Register */
-#define UART_MSR 0x20 /* Modem Status Register */
-#define UART_CLK 0x28 /* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL 0x100 /* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
- if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
- UART16550_WRITE(UART_MOD_CNTRL, 3);
- calc_clock();
-
- /* disable interrupts */
- UART16550_WRITE(UART_IER, 0);
-
- /* set up baud rate */
- {
- u32 divisor;
-
- /* set divisor */
- divisor = get_au1x00_uart_baud_base() / baud;
- UART16550_WRITE(UART_CLK, divisor & 0xffff);
- }
-
- /* set data format */
- UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_115200,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE,
- UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(UART_LSR) & 0x1) == 0);
- return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(UART16550_BAUD_115200,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE,
- UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(UART_LSR) & 0x40) == 0);
- UART16550_WRITE(UART_TX, byte);
-
- return 1;
-}
-
-#endif
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
if (!memsize_str)
memsize = 0x08000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
if (!memsize_str)
memsize = 0x08000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = strict_strtol(memsize_str, 0, NULL);
+ strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
excite_device.o excite_procfs.o
-obj-$(CONFIG_KGDB) += excite_dbg_io.o
obj-m += excite_iodev.o
+++ /dev/null
-/*
- * Copyright (C) 2004 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK 25000000
-#define BASE_BAUD (UART_CLK / 16)
-#define REGISTER_BASE_0 0x0208UL
-#define REGISTER_BASE_1 0x0238UL
-
-#define REGISTER_BASE_DBG REGISTER_BASE_1
-
-#define CPRR 0x0004
-#define UACFG 0x0200
-#define UAINTS 0x0204
-#define UARBR (REGISTER_BASE_DBG + 0x0000)
-#define UATHR (REGISTER_BASE_DBG + 0x0004)
-#define UADLL (REGISTER_BASE_DBG + 0x0008)
-#define UAIER (REGISTER_BASE_DBG + 0x000c)
-#define UADLH (REGISTER_BASE_DBG + 0x0010)
-#define UAIIR (REGISTER_BASE_DBG + 0x0014)
-#define UAFCR (REGISTER_BASE_DBG + 0x0018)
-#define UALCR (REGISTER_BASE_DBG + 0x001c)
-#define UAMCR (REGISTER_BASE_DBG + 0x0020)
-#define UALSR (REGISTER_BASE_DBG + 0x0024)
-#define UAMSR (REGISTER_BASE_DBG + 0x0028)
-#define UASCR (REGISTER_BASE_DBG + 0x002c)
-
-#define PARITY_NONE 0
-#define PARITY_ODD 0x08
-#define PARITY_EVEN 0x18
-#define PARITY_MARK 0x28
-#define PARITY_SPACE 0x38
-
-#define DATA_5BIT 0x0
-#define DATA_6BIT 0x1
-#define DATA_7BIT 0x2
-#define DATA_8BIT 0x3
-
-#define STOP_1BIT 0x0
-#define STOP_2BIT 0x4
-
-#define BAUD_DBG 57600
-#define PARITY_DBG PARITY_NONE
-#define DATA_DBG DATA_8BIT
-#define STOP_DBG STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
- const u32 divisor = BASE_BAUD / BAUD_DBG;
-
- /* Take the UART out of reset */
- titan_writel(0x00ff1cff, CPRR);
- titan_writel(0x00000000, UACFG);
- titan_writel(0x00000002, UACFG);
-
- titan_writel(0x0, UALCR);
- titan_writel(0x0, UAIER);
-
- /* Disable FIFOs */
- titan_writel(0x00, UAFCR);
-
- titan_writel(0x80, UALCR);
- titan_writel(divisor & 0xff, UADLL);
- titan_writel((divisor & 0xff00) >> 8, UADLH);
- titan_writel(0x0, UALCR);
-
- titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
- /* Enable receiver interrupt */
- titan_readl(UARBR);
- titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
- while (!(titan_readl(UALSR) & 0x1));
- return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
- while (!(titan_readl(UALSR) & 0x20));
- titan_writel(data, UATHR);
- return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
- if (unlikely(
- ((titan_readl(UAIIR) & 0x7) == 4)
- && ((titan_readl(UARBR) & 0xff) == 0x3)))
- set_async_breakpoint(®s->cp0_epc);
-}
mips_cpu_irq_init();
rm7k_cpu_irq_init();
rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
- excite_kgdb_init();
-#endif
}
asmlinkage void plat_irq_dispatch(void)
msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
if ((pending & (1 << TITAN_IRQ)) && msgint) {
ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
- excite_kgdb_inthdl();
-#endif
do_IRQ(TITAN_IRQ);
return;
}
/* Take the DUART out of reset */
titan_writel(0x00ff1cff, CPRR);
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
/* Enable both ports */
titan_writel(MASK_SER0 | MASK_SER1, UACFG);
#else
/* Enable port #0 only */
titan_writel(MASK_SER0, UACFG);
-#endif /* defined(CONFIG_KGDB) */
+#endif
/*
* Set up serial port #0. Do not use autodetection; the result is
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep 6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
#
CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
+# CONFIG_FUSION is not set
#
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
# CONFIG_DEBUG_KERNEL is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
# CONFIG_MIPS_UNCACHED is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_LOG_BUF_SHIFT=14
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
#
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
#
# Security options
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_SB1XXX_CORELIS is not set
#
CONFIG_CROSSCOMPILE=y
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
# CONFIG_RUNTIME_DEBUG is not set
#
#include <asm/bcache.h>
#include <asm/irq.h>
#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
#include <asm/traps.h>
#include <asm/debug.h>
#include <asm/bcache.h>
#include <asm/irq.h>
#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
#include <asm/traps.h>
#include <asm/debug.h>
obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o
obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o
-obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_64BIT) += cpu-bugs64.o
+++ /dev/null
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0 mfc0
-#define DMTC0 mtc0
-#define LDC1 lwc1
-#define SDC1 lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0 dmfc0
-#define DMTC0 dmtc0
-#define LDC1 ldc1
-#define SDC1 ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
- .align 5
- NESTED(trap_low, GDB_FR_SIZE, sp)
- .set noat
- .set noreorder
-
- mfc0 k0, CP0_STATUS
- sll k0, 3 /* extract cu0 bit */
- bltz k0, 1f
- move k1, sp
-
- /*
- * Called from user mode, go somewhere else.
- */
- mfc0 k0, CP0_CAUSE
- andi k0, k0, 0x7c
-#ifdef CONFIG_64BIT
- dsll k0, k0, 1
-#endif
- PTR_L k1, saved_vectors(k0)
- jr k1
- nop
-1:
- move k0, sp
- PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above
- LONG_S k0, GDB_FR_REG29(sp)
- LONG_S $2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
- mfc0 v0, CP0_STATUS
- LONG_S v0, GDB_FR_STATUS(sp)
- mfc0 v0, CP0_CAUSE
- LONG_S v0, GDB_FR_CAUSE(sp)
- DMFC0 v0, CP0_EPC
- LONG_S v0, GDB_FR_EPC(sp)
- DMFC0 v0, CP0_BADVADDR
- LONG_S v0, GDB_FR_BADVADDR(sp)
- mfhi v0
- LONG_S v0, GDB_FR_HI(sp)
- mflo v0
- LONG_S v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
- LONG_S zero, GDB_FR_REG0(sp) /* I know... */
- LONG_S $1, GDB_FR_REG1(sp)
- /* v0 already saved */
- LONG_S $3, GDB_FR_REG3(sp)
- LONG_S $4, GDB_FR_REG4(sp)
- LONG_S $5, GDB_FR_REG5(sp)
- LONG_S $6, GDB_FR_REG6(sp)
- LONG_S $7, GDB_FR_REG7(sp)
- LONG_S $8, GDB_FR_REG8(sp)
- LONG_S $9, GDB_FR_REG9(sp)
- LONG_S $10, GDB_FR_REG10(sp)
- LONG_S $11, GDB_FR_REG11(sp)
- LONG_S $12, GDB_FR_REG12(sp)
- LONG_S $13, GDB_FR_REG13(sp)
- LONG_S $14, GDB_FR_REG14(sp)
- LONG_S $15, GDB_FR_REG15(sp)
- LONG_S $16, GDB_FR_REG16(sp)
- LONG_S $17, GDB_FR_REG17(sp)
- LONG_S $18, GDB_FR_REG18(sp)
- LONG_S $19, GDB_FR_REG19(sp)
- LONG_S $20, GDB_FR_REG20(sp)
- LONG_S $21, GDB_FR_REG21(sp)
- LONG_S $22, GDB_FR_REG22(sp)
- LONG_S $23, GDB_FR_REG23(sp)
- LONG_S $24, GDB_FR_REG24(sp)
- LONG_S $25, GDB_FR_REG25(sp)
- LONG_S $26, GDB_FR_REG26(sp)
- LONG_S $27, GDB_FR_REG27(sp)
- LONG_S $28, GDB_FR_REG28(sp)
- /* sp already saved */
- LONG_S $30, GDB_FR_REG30(sp)
- LONG_S $31, GDB_FR_REG31(sp)
-
- CLI /* disable interrupts */
- TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
- mfc0 v0, CP0_STATUS /* FPU enabled? */
- srl v0, v0, 16
- andi v0, v0, (ST0_CU1 >> 16)
-
- beqz v0,2f /* disabled, skip */
- nop
-
- SDC1 $0, GDB_FR_FPR0(sp)
- SDC1 $1, GDB_FR_FPR1(sp)
- SDC1 $2, GDB_FR_FPR2(sp)
- SDC1 $3, GDB_FR_FPR3(sp)
- SDC1 $4, GDB_FR_FPR4(sp)
- SDC1 $5, GDB_FR_FPR5(sp)
- SDC1 $6, GDB_FR_FPR6(sp)
- SDC1 $7, GDB_FR_FPR7(sp)
- SDC1 $8, GDB_FR_FPR8(sp)
- SDC1 $9, GDB_FR_FPR9(sp)
- SDC1 $10, GDB_FR_FPR10(sp)
- SDC1 $11, GDB_FR_FPR11(sp)
- SDC1 $12, GDB_FR_FPR12(sp)
- SDC1 $13, GDB_FR_FPR13(sp)
- SDC1 $14, GDB_FR_FPR14(sp)
- SDC1 $15, GDB_FR_FPR15(sp)
- SDC1 $16, GDB_FR_FPR16(sp)
- SDC1 $17, GDB_FR_FPR17(sp)
- SDC1 $18, GDB_FR_FPR18(sp)
- SDC1 $19, GDB_FR_FPR19(sp)
- SDC1 $20, GDB_FR_FPR20(sp)
- SDC1 $21, GDB_FR_FPR21(sp)
- SDC1 $22, GDB_FR_FPR22(sp)
- SDC1 $23, GDB_FR_FPR23(sp)
- SDC1 $24, GDB_FR_FPR24(sp)
- SDC1 $25, GDB_FR_FPR25(sp)
- SDC1 $26, GDB_FR_FPR26(sp)
- SDC1 $27, GDB_FR_FPR27(sp)
- SDC1 $28, GDB_FR_FPR28(sp)
- SDC1 $29, GDB_FR_FPR29(sp)
- SDC1 $30, GDB_FR_FPR30(sp)
- SDC1 $31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
- cfc1 v0, CP1_STATUS
- LONG_S v0, GDB_FR_FSR(sp)
- cfc1 v0, CP1_REVISION
- LONG_S v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
- LONG_S sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
- mfc0 v0, CP0_INDEX
- LONG_S v0, GDB_FR_CP0_INDEX(sp)
- mfc0 v0, CP0_RANDOM
- LONG_S v0, GDB_FR_CP0_RANDOM(sp)
- DMFC0 v0, CP0_ENTRYLO0
- LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp)
- DMFC0 v0, CP0_ENTRYLO1
- LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp)
- DMFC0 v0, CP0_CONTEXT
- LONG_S v0, GDB_FR_CP0_CONTEXT(sp)
- mfc0 v0, CP0_PAGEMASK
- LONG_S v0, GDB_FR_CP0_PAGEMASK(sp)
- mfc0 v0, CP0_WIRED
- LONG_S v0, GDB_FR_CP0_WIRED(sp)
- DMFC0 v0, CP0_ENTRYHI
- LONG_S v0, GDB_FR_CP0_ENTRYHI(sp)
- mfc0 v0, CP0_PRID
- LONG_S v0, GDB_FR_CP0_PRID(sp)
-
- .set at
-
-/*
- * Continue with the higher level handler
- */
-
- move a0,sp
-
- jal handle_exception
- nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
- .set noat
-
- LONG_L v0, GDB_FR_CP0_ENTRYHI(sp)
- LONG_L v1, GDB_FR_CP0_WIRED(sp)
- DMTC0 v0, CP0_ENTRYHI
- mtc0 v1, CP0_WIRED
- LONG_L v0, GDB_FR_CP0_PAGEMASK(sp)
- LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp)
- mtc0 v0, CP0_PAGEMASK
- DMTC0 v1, CP0_ENTRYLO1
- LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp)
- LONG_L v1, GDB_FR_CP0_INDEX(sp)
- DMTC0 v0, CP0_ENTRYLO0
- LONG_L v0, GDB_FR_CP0_CONTEXT(sp)
- mtc0 v1, CP0_INDEX
- DMTC0 v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
- mfc0 v0, CP0_STATUS /* check if the FPU is enabled */
- srl v0, v0, 16
- andi v0, v0, (ST0_CU1 >> 16)
-
- beqz v0, 3f /* disabled, skip */
- nop
-
- LDC1 $31, GDB_FR_FPR31(sp)
- LDC1 $30, GDB_FR_FPR30(sp)
- LDC1 $29, GDB_FR_FPR29(sp)
- LDC1 $28, GDB_FR_FPR28(sp)
- LDC1 $27, GDB_FR_FPR27(sp)
- LDC1 $26, GDB_FR_FPR26(sp)
- LDC1 $25, GDB_FR_FPR25(sp)
- LDC1 $24, GDB_FR_FPR24(sp)
- LDC1 $23, GDB_FR_FPR23(sp)
- LDC1 $22, GDB_FR_FPR22(sp)
- LDC1 $21, GDB_FR_FPR21(sp)
- LDC1 $20, GDB_FR_FPR20(sp)
- LDC1 $19, GDB_FR_FPR19(sp)
- LDC1 $18, GDB_FR_FPR18(sp)
- LDC1 $17, GDB_FR_FPR17(sp)
- LDC1 $16, GDB_FR_FPR16(sp)
- LDC1 $15, GDB_FR_FPR15(sp)
- LDC1 $14, GDB_FR_FPR14(sp)
- LDC1 $13, GDB_FR_FPR13(sp)
- LDC1 $12, GDB_FR_FPR12(sp)
- LDC1 $11, GDB_FR_FPR11(sp)
- LDC1 $10, GDB_FR_FPR10(sp)
- LDC1 $9, GDB_FR_FPR9(sp)
- LDC1 $8, GDB_FR_FPR8(sp)
- LDC1 $7, GDB_FR_FPR7(sp)
- LDC1 $6, GDB_FR_FPR6(sp)
- LDC1 $5, GDB_FR_FPR5(sp)
- LDC1 $4, GDB_FR_FPR4(sp)
- LDC1 $3, GDB_FR_FPR3(sp)
- LDC1 $2, GDB_FR_FPR2(sp)
- LDC1 $1, GDB_FR_FPR1(sp)
- LDC1 $0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
- /* Read-modify write of Status must be atomic */
- mfc0 t2, CP0_TCSTATUS
- ori t1, t2, TCSTATUS_IXMT
- mtc0 t1, CP0_TCSTATUS
- andi t2, t2, TCSTATUS_IXMT
- _ehb
- DMT 9 # dmt t1
- jal mips_ihb
- nop
-#endif /* CONFIG_MIPS_MT_SMTC */
- mfc0 t0, CP0_STATUS
- ori t0, 0x1f
- xori t0, 0x1f
- mtc0 t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
- andi t1, t1, VPECONTROL_TE
- beqz t1, 9f
- nop
- EMT # emt
-9:
- mfc0 t1, CP0_TCSTATUS
- xori t1, t1, TCSTATUS_IXMT
- or t1, t1, t2
- mtc0 t1, CP0_TCSTATUS
- _ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
- LONG_L v0, GDB_FR_STATUS(sp)
- LONG_L v1, GDB_FR_EPC(sp)
- mtc0 v0, CP0_STATUS
- DMTC0 v1, CP0_EPC
- LONG_L v0, GDB_FR_HI(sp)
- LONG_L v1, GDB_FR_LO(sp)
- mthi v0
- mtlo v1
- LONG_L $31, GDB_FR_REG31(sp)
- LONG_L $30, GDB_FR_REG30(sp)
- LONG_L $28, GDB_FR_REG28(sp)
- LONG_L $27, GDB_FR_REG27(sp)
- LONG_L $26, GDB_FR_REG26(sp)
- LONG_L $25, GDB_FR_REG25(sp)
- LONG_L $24, GDB_FR_REG24(sp)
- LONG_L $23, GDB_FR_REG23(sp)
- LONG_L $22, GDB_FR_REG22(sp)
- LONG_L $21, GDB_FR_REG21(sp)
- LONG_L $20, GDB_FR_REG20(sp)
- LONG_L $19, GDB_FR_REG19(sp)
- LONG_L $18, GDB_FR_REG18(sp)
- LONG_L $17, GDB_FR_REG17(sp)
- LONG_L $16, GDB_FR_REG16(sp)
- LONG_L $15, GDB_FR_REG15(sp)
- LONG_L $14, GDB_FR_REG14(sp)
- LONG_L $13, GDB_FR_REG13(sp)
- LONG_L $12, GDB_FR_REG12(sp)
- LONG_L $11, GDB_FR_REG11(sp)
- LONG_L $10, GDB_FR_REG10(sp)
- LONG_L $9, GDB_FR_REG9(sp)
- LONG_L $8, GDB_FR_REG8(sp)
- LONG_L $7, GDB_FR_REG7(sp)
- LONG_L $6, GDB_FR_REG6(sp)
- LONG_L $5, GDB_FR_REG5(sp)
- LONG_L $4, GDB_FR_REG4(sp)
- LONG_L $3, GDB_FR_REG3(sp)
- LONG_L $2, GDB_FR_REG2(sp)
- LONG_L $1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
- LONG_L k0, GDB_FR_EPC(sp)
- LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */
- jr k0
- rfe
-#else
- LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */
-
- .set mips3
- eret
- .set mips0
-#endif
- .set at
- .set reorder
- END(trap_low)
-
-LEAF(kgdb_read_byte)
-4: lb t0, (a0)
- sb t0, (a1)
- li v0, 0
- jr ra
- .section __ex_table,"a"
- PTR 4b, kgdbfault
- .previous
- END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5: sb a0, (a1)
- li v0, 0
- jr ra
- .section __ex_table,"a"
- PTR 5b, kgdbfault
- .previous
- END(kgdb_write_byte)
-
- .type kgdbfault@function
- .ent kgdbfault
-
-kgdbfault: li v0, -EFAULT
- jr ra
- .end kgdbfault
+++ /dev/null
-/*
- * arch/mips/kernel/gdb-stub.c
- *
- * Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- * Contributed by HP Systems
- *
- * Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- * Copyright (C) 1995 Andreas Busse
- *
- * Copyright (C) 2003 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- * To enable debugger support, two things need to happen. One, a
- * call to set_debug_traps() is necessary in order to allow any breakpoints
- * or error conditions to be properly intercepted and reported to gdb.
- * Two, a breakpoint needs to be generated to begin communication. This
- * is most easily accomplished by a call to breakpoint(). Breakpoint()
- * simulates a breakpoint by executing a BREAK instruction.
- *
- *
- * The following gdb commands are supported:
- *
- * command function Return value
- *
- * g return the value of the CPU registers hex data or ENN
- * G set the value of the CPU registers OK or ENN
- *
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
- *
- * c Resume at current address SNN ( signal NN)
- * cAA..AA Continue at address AA..AA SNN
- *
- * s Step one instruction SNN
- * sAA..AA Step one instruction from AA..AA SNN
- *
- * k kill
- *
- * ? What was the last sigval ? SNN (signal NN)
- *
- * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
- * baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum. A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer. '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host: Reply:
- * $m0,10#2a +$00010203040506070809101112131415#42
- *
- *
- * ==============
- * MORE EXAMPLES:
- * ==============
- *
- * For reference -- the following are the steps that one
- * company took (RidgeRun Inc) to get remote gdb debugging
- * going. In this scenario the host machine was a PC and the
- * target platform was a Galileo EVB64120A MIPS evaluation
- * board.
- *
- * Step 1:
- * First download gdb-5.0.tar.gz from the internet.
- * and then build/install the package.
- *
- * Example:
- * $ tar zxf gdb-5.0.tar.gz
- * $ cd gdb-5.0
- * $ ./configure --target=mips-linux-elf
- * $ make
- * $ install
- * $ which mips-linux-elf-gdb
- * /usr/local/bin/mips-linux-elf-gdb
- *
- * Step 2:
- * Configure linux for remote debugging and build it.
- *
- * Example:
- * $ cd ~/linux
- * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- * $ make
- *
- * Step 3:
- * Download the kernel to the remote target and start
- * the kernel running. It will promptly halt and wait
- * for the host gdb session to connect. It does this
- * since the "Kernel Hacking" option has defined
- * CONFIG_KGDB which in turn enables your calls
- * to:
- * set_debug_traps();
- * breakpoint();
- *
- * Step 4:
- * Start the gdb session on the host.
- *
- * Example:
- * $ mips-linux-elf-gdb vmlinux
- * (gdb) set remotebaud 115200
- * (gdb) target remote /dev/ttyS1
- * ...at this point you are connected to
- * the remote target and can use gdb
- * in the normal fasion. Setting
- * breakpoints, single stepping,
- * printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c); /* write a single character */
-extern char getDebugChar(void); /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
- [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized; /* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access. Note that they'll crash anyway if
- we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
- if (ch >= 'a' && ch <= 'f')
- return ch-'a'+10;
- if (ch >= '0' && ch <= '9')
- return ch-'0';
- if (ch >= 'A' && ch <= 'F')
- return ch-'A'+10;
- return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
- unsigned char checksum;
- unsigned char xmitcsum;
- int i;
- int count;
- unsigned char ch;
-
- do {
- /*
- * wait around for the start character,
- * ignore all other characters
- */
- while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
- checksum = 0;
- xmitcsum = -1;
- count = 0;
-
- /*
- * now, read until a # or end of buffer is found
- */
- while (count < BUFMAX) {
- ch = getDebugChar();
- if (ch == '#')
- break;
- checksum = checksum + ch;
- buffer[count] = ch;
- count = count + 1;
- }
-
- if (count >= BUFMAX)
- continue;
-
- buffer[count] = 0;
-
- if (ch == '#') {
- xmitcsum = hex(getDebugChar() & 0x7f) << 4;
- xmitcsum |= hex(getDebugChar() & 0x7f);
-
- if (checksum != xmitcsum)
- putDebugChar('-'); /* failed checksum */
- else {
- putDebugChar('+'); /* successful transfer */
-
- /*
- * if a sequence char is present,
- * reply the sequence ID
- */
- if (buffer[2] == ':') {
- putDebugChar(buffer[0]);
- putDebugChar(buffer[1]);
-
- /*
- * remove sequence chars from buffer
- */
- count = strlen(buffer);
- for (i=3; i <= count; i++)
- buffer[i-3] = buffer[i];
- }
- }
- }
- }
- while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
- unsigned char checksum;
- int count;
- unsigned char ch;
-
- /*
- * $<packet info>#<checksum>.
- */
-
- do {
- putDebugChar('$');
- checksum = 0;
- count = 0;
-
- while ((ch = buffer[count]) != 0) {
- if (!(putDebugChar(ch)))
- return;
- checksum += ch;
- count += 1;
- }
-
- putDebugChar('#');
- putDebugChar(hexchars[checksum >> 4]);
- putDebugChar(hexchars[checksum & 0xf]);
-
- }
- while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
- unsigned char ch;
-
- while (count-- > 0) {
- if (kgdb_read_byte(mem++, &ch) != 0)
- return 0;
- *buf++ = hexchars[ch >> 4];
- *buf++ = hexchars[ch & 0xf];
- }
-
- *buf = 0;
-
- return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
- int i;
- unsigned char ch;
-
- for (i=0; i<count; i++)
- {
- if (binary) {
- ch = *buf++;
- if (ch == 0x7d)
- ch = 0x20 ^ *buf++;
- }
- else {
- ch = hex(*buf++) << 4;
- ch |= hex(*buf++);
- }
- if (kgdb_write_byte(ch, mem++) != 0)
- return 0;
- }
-
- return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands. It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
- unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */
- unsigned char signo; /* Signal that we map this trap into */
-} hard_trap_info[] = {
- { 6, SIGBUS }, /* instruction bus error */
- { 7, SIGBUS }, /* data bus error */
- { 9, SIGTRAP }, /* break */
- { 10, SIGILL }, /* reserved instruction */
-/* { 11, SIGILL }, */ /* CPU unusable */
- { 12, SIGFPE }, /* overflow */
- { 13, SIGTRAP }, /* trap */
- { 14, SIGSEGV }, /* virtual instruction cache coherency */
- { 15, SIGFPE }, /* floating point exception */
- { 23, SIGSEGV }, /* watch */
- { 31, SIGSEGV }, /* virtual data cache coherency */
- { 0, 0} /* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
- struct hard_trap_info *ht;
- unsigned long flags;
- unsigned char c;
-
- local_irq_save(flags);
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
- putDebugChar('+'); /* 'hello world' */
- /*
- * In case GDB is started before us, ack any packets
- * (presumably "$?#xx") sitting there.
- */
- while((c = getDebugChar()) != '$');
- while((c = getDebugChar()) != '#');
- c = getDebugChar(); /* eat first csum byte */
- c = getDebugChar(); /* eat second csum byte */
- putDebugChar('+'); /* ack it */
-
- initialized = 1;
- local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
- struct hard_trap_info *ht;
- unsigned long flags;
-
- local_irq_save(flags);
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- set_except_vector(ht->tt, saved_vectors[ht->tt]);
- local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
- struct hard_trap_info *ht;
-
- for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
- if (ht->tt == tt)
- return ht->signo;
-
- return SIGHUP; /* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
- int numChars = 0;
- int hexValue;
-
- *intValue = 0;
-
- while (**ptr) {
- hexValue = hex(**ptr);
- if (hexValue < 0)
- break;
-
- *intValue = (*intValue << 4) | hexValue;
- numChars ++;
-
- (*ptr)++;
- }
-
- return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
- int numChars = 0;
- int hexValue;
-
- *longValue = 0;
-
- while (**ptr) {
- hexValue = hex(**ptr);
- if (hexValue < 0)
- break;
-
- *longValue = (*longValue << 4) | hexValue;
- numChars ++;
-
- (*ptr)++;
- }
-
- return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
- /*
- * Saved main processor registers
- */
- printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg0, regs->reg1, regs->reg2, regs->reg3,
- regs->reg4, regs->reg5, regs->reg6, regs->reg7);
- printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg8, regs->reg9, regs->reg10, regs->reg11,
- regs->reg12, regs->reg13, regs->reg14, regs->reg15);
- printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg16, regs->reg17, regs->reg18, regs->reg19,
- regs->reg20, regs->reg21, regs->reg22, regs->reg23);
- printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
- regs->reg24, regs->reg25, regs->reg26, regs->reg27,
- regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
- /*
- * Saved cp0 registers
- */
- printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\n",
- regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
- unsigned long addr;
- unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
- union mips_instruction insn;
- unsigned long targ;
- int is_branch, is_cond, i;
-
- targ = regs->cp0_epc;
- insn.word = *(unsigned int *)targ;
- is_branch = is_cond = 0;
-
- switch (insn.i_format.opcode) {
- /*
- * jr and jalr are in r_format format.
- */
- case spec_op:
- switch (insn.r_format.func) {
- case jalr_op:
- case jr_op:
- targ = *(®s->reg0 + insn.r_format.rs);
- is_branch = 1;
- break;
- }
- break;
-
- /*
- * This group contains:
- * bltz_op, bgez_op, bltzl_op, bgezl_op,
- * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
- */
- case bcond_op:
- is_branch = is_cond = 1;
- targ += 4 + (insn.i_format.simmediate << 2);
- break;
-
- /*
- * These are unconditional and in j_format.
- */
- case jal_op:
- case j_op:
- is_branch = 1;
- targ += 4;
- targ >>= 28;
- targ <<= 28;
- targ |= (insn.j_format.target << 2);
- break;
-
- /*
- * These are conditional.
- */
- case beq_op:
- case beql_op:
- case bne_op:
- case bnel_op:
- case blez_op:
- case blezl_op:
- case bgtz_op:
- case bgtzl_op:
- case cop0_op:
- case cop1_op:
- case cop2_op:
- case cop1x_op:
- is_branch = is_cond = 1;
- targ += 4 + (insn.i_format.simmediate << 2);
- break;
- }
-
- if (is_branch) {
- i = 0;
- if (is_cond && targ != (regs->cp0_epc + 8)) {
- step_bp[i].addr = regs->cp0_epc + 8;
- step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
- *(unsigned *)(regs->cp0_epc + 8) = BP;
- }
- step_bp[i].addr = targ;
- step_bp[i].val = *(unsigned *)targ;
- *(unsigned *)targ = BP;
- } else {
- step_bp[0].addr = regs->cp0_epc + 4;
- step_bp[0].val = *(unsigned *)(regs->cp0_epc + 4);
- *(unsigned *)(regs->cp0_epc + 4) = BP;
- }
-}
-
-/*
- * If asynchronously interrupted by gdb, then we need to set a breakpoint
- * at the interrupted instruction so that we wind up stopped with a
- * reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required. The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
- /* skip breaking into userland */
- if ((*epc & 0x80000000) == 0)
- return;
-
-#ifdef CONFIG_SMP
- /* avoid deadlock if someone is make IPC */
- if (spin_is_locked(&smp_call_lock))
- return;
-#endif
-
- async_bp.addr = *epc;
- *epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
- unsigned flags;
- int cpu = smp_processor_id();
-
- local_irq_save(flags);
-
- __raw_spin_lock(&kgdb_cpulock[cpu]);
- __raw_spin_unlock(&kgdb_cpulock[cpu]);
-
- local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
- cpumask_t mask = cpu_online_map;
- struct call_data_struct data;
- int cpu = smp_processor_id();
- int cpus;
-
- /*
- * Can die spectacularly if this CPU isn't yet marked online
- */
- BUG_ON(!cpu_online(cpu));
-
- cpu_clear(cpu, mask);
- cpus = cpus_weight(mask);
- if (!cpus)
- return 0;
-
- if (spin_is_locked(&smp_call_lock)) {
- /*
- * Some other processor is trying to make us do something
- * but we're not going to respond... give up
- */
- return -1;
- }
-
- /*
- * We will continue here, accepting the fact that
- * the kernel may deadlock if another CPU attempts
- * to call smp_call_function now...
- */
-
- data.func = kgdb_wait;
- data.info = NULL;
- atomic_set(&data.started, 0);
- data.wait = 0;
-
- spin_lock(&smp_call_lock);
- call_data = &data;
- mb();
-
- core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
- /* Wait for response */
- /* FIXME: lock-up detection, backtrace on lock-up */
- while (atomic_read(&data.started) != cpus)
- barrier();
-
- call_data = NULL;
- spin_unlock(&smp_call_lock);
-#endif
-
- return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb. It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
- int trap; /* Trap type */
- int sigval;
- long addr;
- int length;
- char *ptr;
- unsigned long *stack;
- int i;
- int bflag = 0;
-
- kgdb_started = 1;
-
- /*
- * acquire the big kgdb spinlock
- */
- if (!spin_trylock(&kgdb_lock)) {
- /*
- * some other CPU has the lock, we should go back to
- * receive the gdb_wait IPC
- */
- return;
- }
-
- /*
- * If we're in async_breakpoint(), restore the real EPC from
- * the breakpoint.
- */
- if (regs->cp0_epc == (unsigned long)async_breakinst) {
- regs->cp0_epc = async_bp.addr;
- async_bp.addr = 0;
- }
-
- /*
- * acquire the CPU spinlocks
- */
- for_each_online_cpu(i)
- if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
- panic("kgdb: couldn't get cpulock %d\n", i);
-
- /*
- * force other cpus to enter kgdb
- */
- kgdb_smp_call_kgdb_wait();
-
- /*
- * If we're in breakpoint() increment the PC
- */
- trap = (regs->cp0_cause & 0x7c) >> 2;
- if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
- regs->cp0_epc += 4;
-
- /*
- * If we were single_stepping, restore the opcodes hoisted
- * for the breakpoint[s].
- */
- if (step_bp[0].addr) {
- *(unsigned *)step_bp[0].addr = step_bp[0].val;
- step_bp[0].addr = 0;
-
- if (step_bp[1].addr) {
- *(unsigned *)step_bp[1].addr = step_bp[1].val;
- step_bp[1].addr = 0;
- }
- }
-
- stack = (long *)regs->reg29; /* stack ptr */
- sigval = computeSignal(trap);
-
- /*
- * reply to host that an exception has occurred
- */
- ptr = output_buffer;
-
- /*
- * Send trap type (converted to signal)
- */
- *ptr++ = 'T';
- *ptr++ = hexchars[sigval >> 4];
- *ptr++ = hexchars[sigval & 0xf];
-
- /*
- * Send Error PC
- */
- *ptr++ = hexchars[REG_EPC >> 4];
- *ptr++ = hexchars[REG_EPC & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)®s->cp0_epc, ptr, sizeof(long), 0);
- *ptr++ = ';';
-
- /*
- * Send frame pointer
- */
- *ptr++ = hexchars[REG_FP >> 4];
- *ptr++ = hexchars[REG_FP & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)®s->reg30, ptr, sizeof(long), 0);
- *ptr++ = ';';
-
- /*
- * Send stack pointer
- */
- *ptr++ = hexchars[REG_SP >> 4];
- *ptr++ = hexchars[REG_SP & 0xf];
- *ptr++ = ':';
- ptr = mem2hex((char *)®s->reg29, ptr, sizeof(long), 0);
- *ptr++ = ';';
-
- *ptr++ = 0;
- putpacket(output_buffer); /* send it off... */
-
- /*
- * Wait for input from remote GDB
- */
- while (1) {
- output_buffer[0] = 0;
- getpacket(input_buffer);
-
- switch (input_buffer[0])
- {
- case '?':
- output_buffer[0] = 'S';
- output_buffer[1] = hexchars[sigval >> 4];
- output_buffer[2] = hexchars[sigval & 0xf];
- output_buffer[3] = 0;
- break;
-
- /*
- * Detach debugger; let CPU run
- */
- case 'D':
- putpacket(output_buffer);
- goto finish_kgdb;
- break;
-
- case 'd':
- /* toggle debug flag */
- break;
-
- /*
- * Return the value of the CPU registers
- */
- case 'g':
- ptr = output_buffer;
- ptr = mem2hex((char *)®s->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
- ptr = mem2hex((char *)®s->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
- ptr = mem2hex((char *)®s->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
- ptr = mem2hex((char *)®s->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
- ptr = mem2hex((char *)®s->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
- ptr = mem2hex((char *)®s->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
- break;
-
- /*
- * set the value of the CPU registers - return OK
- */
- case 'G':
- {
- ptr = &input_buffer[1];
- hex2mem(ptr, (char *)®s->reg0, 32*sizeof(long), 0, 0);
- ptr += 32*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->cp0_status, 6*sizeof(long), 0, 0);
- ptr += 6*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->fpr0, 32*sizeof(long), 0, 0);
- ptr += 32*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->cp1_fsr, 2*sizeof(long), 0, 0);
- ptr += 2*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->frame_ptr, 2*sizeof(long), 0, 0);
- ptr += 2*(2*sizeof(long));
- hex2mem(ptr, (char *)®s->cp0_index, 16*sizeof(long), 0, 0);
- strcpy(output_buffer, "OK");
- }
- break;
-
- /*
- * mAA..AA,LLLL Read LLLL bytes at address AA..AA
- */
- case 'm':
- ptr = &input_buffer[1];
-
- if (hexToLong(&ptr, &addr)
- && *ptr++ == ','
- && hexToInt(&ptr, &length)) {
- if (mem2hex((char *)addr, output_buffer, length, 1))
- break;
- strcpy(output_buffer, "E03");
- } else
- strcpy(output_buffer, "E01");
- break;
-
- /*
- * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
- */
- case 'X':
- bflag = 1;
- /* fall through */
-
- /*
- * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
- */
- case 'M':
- ptr = &input_buffer[1];
-
- if (hexToLong(&ptr, &addr)
- && *ptr++ == ','
- && hexToInt(&ptr, &length)
- && *ptr++ == ':') {
- if (hex2mem(ptr, (char *)addr, length, bflag, 1))
- strcpy(output_buffer, "OK");
- else
- strcpy(output_buffer, "E03");
- }
- else
- strcpy(output_buffer, "E02");
- break;
-
- /*
- * cAA..AA Continue at address AA..AA(optional)
- */
- case 'c':
- /* try to read optional parameter, pc unchanged if no parm */
-
- ptr = &input_buffer[1];
- if (hexToLong(&ptr, &addr))
- regs->cp0_epc = addr;
-
- goto exit_kgdb_exception;
- break;
-
- /*
- * kill the program; let us try to restart the machine
- * Reset the whole machine.
- */
- case 'k':
- case 'r':
- machine_restart("kgdb restarts machine");
- break;
-
- /*
- * Step to next instruction
- */
- case 's':
- /*
- * There is no single step insn in the MIPS ISA, so we
- * use breakpoints and continue, instead.
- */
- single_step(regs);
- goto exit_kgdb_exception;
- /* NOTREACHED */
- break;
-
- /*
- * Set baud rate (bBB)
- * FIXME: Needs to be written
- */
- case 'b':
- {
-#if 0
- int baudrate;
- extern void set_timer_3();
-
- ptr = &input_buffer[1];
- if (!hexToInt(&ptr, &baudrate))
- {
- strcpy(output_buffer, "B01");
- break;
- }
-
- /* Convert baud rate to uart clock divider */
-
- switch (baudrate)
- {
- case 38400:
- baudrate = 16;
- break;
- case 19200:
- baudrate = 33;
- break;
- case 9600:
- baudrate = 65;
- break;
- default:
- baudrate = 0;
- strcpy(output_buffer, "B02");
- goto x1;
- }
-
- if (baudrate) {
- putpacket("OK"); /* Ack before changing speed */
- set_timer_3(baudrate); /* Set it */
- }
-#endif
- }
- break;
-
- } /* switch */
-
- /*
- * reply to the request
- */
-
- putpacket(output_buffer);
-
- } /* while */
-
- return;
-
-finish_kgdb:
- restore_debug_traps();
-
-exit_kgdb_exception:
- /* release locks so other CPUs can go */
- for_each_online_cpu(i)
- __raw_spin_unlock(&kgdb_cpulock[i]);
- spin_unlock(&kgdb_lock);
-
- __flush_cache_all();
- return;
-}
-
-/*
- * This function will generate a breakpoint exception. It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
- if (!initialized)
- return;
-
- __asm__ __volatile__(
- ".globl breakinst\n\t"
- ".set\tnoreorder\n\t"
- "nop\n"
- "breakinst:\tbreak\n\t"
- "nop\n\t"
- ".set\treorder"
- );
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
- __asm__ __volatile__(
- ".globl async_breakinst\n\t"
- ".set\tnoreorder\n\t"
- "nop\n"
- "async_breakinst:\tbreak\n\t"
- "nop\n\t"
- ".set\treorder"
- );
-}
-
-void adel(void)
-{
- __asm__ __volatile__(
- ".globl\tadel\n\t"
- "lui\t$8,0x8000\n\t"
- "lw\t$9,1($8)\n\t"
- );
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
- return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
- kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
- char outbuf[18];
-
- if (!kgdb_started)
- return;
-
- outbuf[0]='O';
-
- while(l) {
- int i = (l>8)?8:l;
- mem2hex((char *)str, &outbuf[1], i, 0);
- outbuf[(i*2)+1]=0;
- putpacket(outbuf);
- str += i;
- l -= i;
- }
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
- gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
- .name = "gdb",
- .write = gdb_console_write,
- .flags = CON_PRINTBUFFER,
- .index = -1
-};
-
-static int __init register_gdb_console(void)
-{
- register_console(&gdb_console);
-
- return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/kallsyms.h>
+#include <linux/kgdb.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
int allocate_irqno(void)
atomic_inc(&irq_err_count);
}
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
- kgdb_flag = 0;
- return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
void __init init_IRQ(void)
{
int i;
+#ifdef CONFIG_KGDB
+ if (kgdb_early_setup)
+ return;
+#endif
+
for (i = 0; i < NR_IRQS; i++)
set_irq_noprobe(i);
arch_init_irq();
#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- printk("Wait for gdb client connection ...\n");
- set_debug_traps();
- breakpoint();
- }
+ if (!kgdb_early_setup)
+ kgdb_early_setup = 1;
#endif
}
--- /dev/null
+/*
+ * Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ * Contributed by HP Systems
+ *
+ * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ * Copyright (C) 1995 Andreas Busse
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2004-2005 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ * Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h> /* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+ unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */
+ unsigned char signo; /* Signal that we map this trap into */
+} hard_trap_info[] = {
+ { 6, SIGBUS }, /* instruction bus error */
+ { 7, SIGBUS }, /* data bus error */
+ { 9, SIGTRAP }, /* break */
+/* { 11, SIGILL }, */ /* CPU unusable */
+ { 12, SIGFPE }, /* overflow */
+ { 13, SIGTRAP }, /* trap */
+ { 14, SIGSEGV }, /* virtual instruction cache coherency */
+ { 15, SIGFPE }, /* floating point exception */
+ { 23, SIGSEGV }, /* watch */
+ { 31, SIGSEGV }, /* virtual data cache coherency */
+ { 0, 0} /* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+ __asm__ __volatile__(
+ ".globl breakinst\n\t"
+ ".set\tnoreorder\n\t"
+ "nop\n"
+ "breakinst:\tbreak\n\t"
+ "nop\n\t"
+ ".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+ kgdb_nmicallback(raw_smp_processor_id(), (void *)0);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+ local_irq_enable();
+ smp_call_function(kgdb_call_nmi_hook, NULL, NULL);
+ local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+ struct hard_trap_info *ht;
+
+ for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+ if (ht->tt == tt)
+ return ht->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+ u32 *ptr = (u32 *)gdb_regs;
+#else
+ u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+ for (reg = 0; reg < 32; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ *(ptr++) = regs->cp0_status;
+ *(ptr++) = regs->lo;
+ *(ptr++) = regs->hi;
+ *(ptr++) = regs->cp0_badvaddr;
+ *(ptr++) = regs->cp0_cause;
+ *(ptr++) = regs->cp0_epc;
+
+ /* FP REGS */
+ if (!(current && (regs->cp0_status & ST0_CU1)))
+ return;
+
+ save_fp(current);
+ for (reg = 0; reg < 32; reg++)
+ *(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+ const u32 *ptr = (u32 *)gdb_regs;
+#else
+ const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+ for (reg = 0; reg < 32; reg++)
+ regs->regs[reg] = *(ptr++);
+
+ regs->cp0_status = *(ptr++);
+ regs->lo = *(ptr++);
+ regs->hi = *(ptr++);
+ regs->cp0_badvaddr = *(ptr++);
+ regs->cp0_cause = *(ptr++);
+ regs->cp0_epc = *(ptr++);
+
+ /* FP REGS from current */
+ if (!(current && (regs->cp0_status & ST0_CU1)))
+ return;
+
+ for (reg = 0; reg < 32; reg++)
+ current->thread.fpu.fpr[reg] = *(ptr++);
+ restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ int reg;
+ struct thread_info *ti = task_thread_info(p);
+ unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+ struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+ u32 *ptr = (u32 *)gdb_regs;
+#else
+ u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+ for (reg = 0; reg < 16; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ /* S0 - S7 */
+ for (reg = 16; reg < 24; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ for (reg = 24; reg < 28; reg++)
+ *(ptr++) = 0;
+
+ /* GP, SP, FP, RA */
+ for (reg = 28; reg < 32; reg++)
+ *(ptr++) = regs->regs[reg];
+
+ *(ptr++) = regs->cp0_status;
+ *(ptr++) = regs->lo;
+ *(ptr++) = regs->hi;
+ *(ptr++) = regs->cp0_badvaddr;
+ *(ptr++) = regs->cp0_cause;
+ *(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+ void *ptr)
+{
+ struct die_args *args = (struct die_args *)ptr;
+ struct pt_regs *regs = args->regs;
+ int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+ if (fixup_exception(regs))
+ return NOTIFY_DONE;
+
+ /* Userpace events, ignore. */
+ if (user_mode(regs))
+ return NOTIFY_DONE;
+
+ if (atomic_read(&kgdb_active) != -1)
+ kgdb_nmicallback(smp_processor_id(), regs);
+
+ if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+ return NOTIFY_DONE;
+
+ if (atomic_read(&kgdb_setting_breakpoint))
+ if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+ regs->cp0_epc += 4;
+
+ /* In SMP mode, __flush_cache_all does IPI */
+ local_irq_enable();
+ __flush_cache_all();
+
+ return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+ .notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+ char *remcom_in_buffer, char *remcom_out_buffer,
+ struct pt_regs *regs)
+{
+ char *ptr;
+ unsigned long address;
+ int cpu = smp_processor_id();
+
+ switch (remcom_in_buffer[0]) {
+ case 's':
+ case 'c':
+ /* handle the optional parameter */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &address))
+ regs->cp0_epc = address;
+
+ atomic_set(&kgdb_cpu_doing_single_step, -1);
+ if (remcom_in_buffer[0] == 's')
+ if (kgdb_contthread)
+ atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+ return 0;
+ }
+
+ return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+ union mips_instruction insn = {
+ .r_format = {
+ .opcode = spec_op,
+ .func = break_op,
+ }
+ };
+ memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+ register_die_notifier(&kgdb_notifier);
+
+ return 0;
+}
+
+/*
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+ unregister_die_notifier(&kgdb_notifier);
+}
#include <linux/bootmem.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
#include <asm/bootinfo.h>
#include <asm/branch.h>
printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
data ? "Data" : "Instruction",
field, regs->cp0_epc, field, regs->regs[31]);
+ if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+ == NOTIFY_STOP)
+ return;
+
die_if_kernel("Oops", regs);
force_sig(SIGBUS, current);
}
{
siginfo_t info;
+ if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+ == NOTIFY_STOP)
+ return;
die_if_kernel("FP exception in kernel code", regs);
if (fcr31 & FPU_CSR_UNI_X) {
siginfo_t info;
char b[40];
+ if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+ return;
+
/*
* A short test says that IRIX 5.3 sends SIGTRAP for all trap
* insns, even for trap and break codes that indicate arithmetic
unsigned int opcode = 0;
int status = -1;
+ if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+ == NOTIFY_STOP)
+ return;
+
die_if_kernel("Reserved instruction in kernel code", regs);
if (unlikely(compute_return_epc(regs) < 0))
extern char except_vec4;
unsigned long i;
+#if defined(CONFIG_KGDB)
+ if (kgdb_early_setup)
+ return; /* Already done */
+#endif
+
if (cpu_has_veic || cpu_has_vint)
ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
else
old_pagemask = read_c0_pagemask();
w = read_c0_wired();
write_c0_wired(w + 1);
- if (read_c0_wired() != w + 1) {
- printk("[tlbwired] No WIRED reg?\n");
- return;
- }
write_c0_index(w << 8);
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
-obj-$(CONFIG_KGDB) += malta-kgdb.o
# FIXME FIXME FIXME
obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
#include <asm/mips-boards/malta.h>
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
int prom_argc;
int *_prom_argv, *_prom_envp;
}
#endif
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
- extern int (*generic_putDebugChar)(char);
- extern char (*generic_getDebugChar)(void);
- char *argptr;
- int line, speed;
-
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
- argptr += strlen("kgdb=ttyS");
- if (*argptr != '0' && *argptr != '1')
- printk("KGDB: Unknown serial line /dev/ttyS%c, "
- "falling back to /dev/ttyS1\n", *argptr);
- line = *argptr == '0' ? 0 : 1;
- printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
- speed = 0;
- if (*++argptr == ',')
- {
- int c;
- while ((c = *++argptr) && ('0' <= c && c <= '9'))
- speed = speed * 10 + c - '0';
- }
- {
- speed = rs_kgdb_hook(line, speed);
- generic_putDebugChar = rs_putDebugChar;
- generic_getDebugChar = rs_getDebugChar;
- }
-
- pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
- "session, please connect your debugger\n",
- line ? 1 : 0, speed);
-
- {
- char *s;
- for (s = "Please connect GDB to this port\r\n"; *s; )
- generic_putDebugChar(*s++);
- }
-
- /* Breakpoint is invoked after interrupts are initialised */
- }
-}
-#endif
-
static void __init mips_nmi_setup(void)
{
void *base;
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
- SERIAL_PORT_DFNS /* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
- return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
- int value)
-{
- outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
- int t;
- struct serial_state *ser = &rs_table[tty_no];
-
- kdb_port_info.state = ser;
- kdb_port_info.magic = SERIAL_MAGIC;
- kdb_port_info.port = ser->port;
- kdb_port_info.flags = ser->flags;
-
- /*
- * Clear all interrupts
- */
- serial_in(&kdb_port_info, UART_LSR);
- serial_in(&kdb_port_info, UART_RX);
- serial_in(&kdb_port_info, UART_IIR);
- serial_in(&kdb_port_info, UART_MSR);
-
- /*
- * Now, initialize the UART
- */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
- if (kdb_port_info.flags & ASYNC_FOURPORT) {
- kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
- t = UART_MCR_DTR | UART_MCR_OUT1;
- } else {
- kdb_port_info.MCR
- = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
- t = UART_MCR_DTR | UART_MCR_RTS;
- }
-
- kdb_port_info.MCR = t; /* no interrupts, please */
- serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
- /*
- * and set the speed of the serial port
- */
- if (speed == 0)
- speed = 9600;
-
- t = kdb_port_info.state->baud_base / speed;
- /* set DLAB */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
- serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
- serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */
- /* reset DLAB */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
- return speed;
-}
-
-int putDebugChar(char c)
-{
- return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
- return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
- if (!kdb_port_info.state) { /* need to init device first */
- return 0;
- }
-
- while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
- ;
-
- serial_out(&kdb_port_info, UART_TX, c);
-
- return 1;
-}
-
-char rs_getDebugChar(void)
-{
- if (!kdb_port_info.state) { /* need to init device first */
- return 0;
- }
-
- while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
- ;
-
- return serial_in(&kdb_port_info, UART_RX);
-}
*/
enable_dma(4);
-#ifdef CONFIG_KGDB
- kgdb_config();
-#endif
-
#ifdef CONFIG_DMA_COHERENT
if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
panic("Hardware DMA cache coherency not supported");
obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
EXTRA_CFLAGS += -Werror
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
- struct serial_state *ser = &rs_table[tty_no];
-
- kdb_port_info.state = ser;
- kdb_port_info.magic = SERIAL_MAGIC;
- kdb_port_info.port = tty_no;
- kdb_port_info.flags = ser->flags;
-
- /*
- * Clear all interrupts
- */
- /* Clear all the transmitter FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
- /* Clear all the receiver FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
- /* Clear all interrupts */
- ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
- IP3106_UART_INT_ALLTX;
-
- /*
- * Now, initialize the UART
- */
- ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
- ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
- /* Wait until FIFO not full */
- while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
- ;
- /* Send one char */
- ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
- return 1;
-}
-
-char getDebugChar(void)
-{
- char ch;
-
- /* Wait until there is a char in the FIFO */
- while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
- IP3106_UART_FIFO_RXFIFO) >> 8))
- ;
- /* Read one char */
- ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
- IP3106_UART_FIFO_RBRTHR;
- /* Advance the RX FIFO read pointer */
- ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
- return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
- ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
- /* Clear all the transmitter FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
- /* Clear all the receiver FIFO counters (pointer and status) */
- ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
- /* Clear all interrupts */
- ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
- IP3106_UART_INT_ALLTX;
- ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
#include <linux/module.h>
#include <asm/io.h>
-#include <asm/gdb-stub.h>
#include <int.h>
#include <uart.h>
#include <linux/random.h>
#include <asm/io.h>
-#include <asm/gdb-stub.h>
#include <int.h>
#include <uart.h>
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
extern char *prom_getcmdline(void);
struct resource standard_io_resources[] = {
ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
}
-#ifdef CONFIG_KGDB
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
- int line;
- argptr += strlen("kgdb=ttyS");
- line = *argptr == '0' ? 0 : 1;
- rs_kgdb_hook(line);
- pr_info("KGDB: Using ttyS%i for session, "
- "please connect your debugger\n", line ? 1 : 0);
- }
-#endif
return;
}
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
#include <asm/txx9/tx3927.h>
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
- unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
{
- if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
- ((dev_fn & 0xff) << 0x08) |
- (where & 0xfc);
+ if (bus->parent == NULL &&
+ devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+ return -1;
+ tx3927_pcicptr->ica =
+ ((bus->number & 0xff) << 0x10) |
+ ((devfn & 0xff) << 0x08) |
+ (where & 0xfc) | (bus->parent ? 1 : 0);
/* clear M_ABORT and Disable M_ABORT Int. */
tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
- return PCIBIOS_SUCCESSFUL;
+ return 0;
}
static inline int check_abort(void)
{
- if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+ if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+ /* flush write buffer */
+ iob();
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ }
return PCIBIOS_SUCCESSFUL;
}
static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 * val)
{
- int ret;
-
- ret = mkaddr(bus->number, devfn, where);
- if (ret)
- return ret;
+ if (mkaddr(bus, devfn, where)) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
switch (size) {
case 1:
static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
- int ret;
-
- ret = mkaddr(bus->number, devfn, where);
- if (ret)
- return ret;
+ if (mkaddr(bus, devfn, where))
+ return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
tx3927_pcicptr->icd = cpu_to_le32(val);
}
- if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
- tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
- tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
- return PCIBIOS_DEVICE_NOT_FOUND;
-
return check_abort();
}
PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
local_irq_restore(flags);
}
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+
+ if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+ printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+ regs->cp0_epc);
+ printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+ tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+ }
+ if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+ /* clear all pci errors */
+ tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+ tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+ tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+ tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+ return IRQ_HANDLED;
+ }
+ console_verbose();
+ panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+ if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+ tx3927_pcierr_interrupt,
+ IRQF_DISABLED, "PCI error",
+ (void *)TX3927_PCIC_REG))
+ printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
* option) any later version.
*/
#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
#include <asm/txx9/tx4927pcic.h>
static struct {
__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
| (PCI_STATUS_REC_MASTER_ABORT << 16),
&pcicptr->pcistatus);
+ /* flush write buffer */
+ iob();
code = PCIBIOS_DEVICE_NOT_FOUND;
}
return code;
.gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */
};
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+ unsigned long val;
+
+ if (!strncmp(str, "trdyto=", 7)) {
+ if (strict_strtoul(str + 7, 0, &val) == 0)
+ tx4927_pci_opts.trdyto = val;
+ return NULL;
+ }
+ if (!strncmp(str, "retryto=", 8)) {
+ if (strict_strtoul(str + 8, 0, &val) == 0)
+ tx4927_pci_opts.retryto = val;
+ return NULL;
+ }
+ if (!strncmp(str, "gbwc=", 5)) {
+ if (strict_strtoul(str + 5, 0, &val) == 0)
+ tx4927_pci_opts.gbwc = val;
+ return NULL;
+ }
+ return str;
+}
+
void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
struct pci_controller *channel, int extarb)
{
tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
}
}
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+ int i;
+ __u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+ printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+ for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+ if (i % 32 == 0) {
+ printk(KERN_CONT "\n");
+ printk(KERN_INFO "%04x:", i);
+ }
+ /* skip registers with side-effects */
+ if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+ || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+ || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+ || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+ printk(KERN_CONT " XXXXXXXX");
+ continue;
+ }
+ printk(KERN_CONT " %08x", __raw_readl(preg));
+ }
+ printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+ if (pcicptrs[i].pcicptr)
+ tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+ }
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ struct tx4927_pcic_reg __iomem *pcicptr =
+ (struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+ if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+ printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+ (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+ tx4927_report_pcic_status1(pcicptr);
+ }
+ if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+ /* clear all pci errors */
+ __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+ | (TX4927_PCIC_PCISTATUS_ALL << 16),
+ &pcicptr->pcistatus);
+ __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+ __raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+ __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+ return IRQ_HANDLED;
+ }
+ console_verbose();
+ tx4927_dump_pcic_settings1(pcicptr);
+ panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+ struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+ if (!pcicptr)
+ return;
+ if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+ /* Reset Bus Arbiter */
+ __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+ /*
+ * swap reqBP and reqXP (raise priority of SLC90E66).
+ * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+ * PCI Backplane board.
+ */
+ __raw_writel(0x72543610, &pcicptr->pbareqport);
+ __raw_writel(0, &pcicptr->pbabm);
+ /* Use Fixed ParkMaster (required by SLC90E66) */
+ __raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+ /* Enable Bus Arbiter */
+ __raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+ TX4927_PCIC_PBACFG_PBAEN,
+ &pcicptr->pbacfg);
+ printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+ __raw_readl(&pcicptr->pbareqport));
+ }
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+ tx4927_quirk_slc90e66_bridge);
+#endif
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/kernel.h>
+#include <linux/interrupt.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4927.h>
pciclk = -1;
return pciclk;
}
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+ if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+ tx4927_pcierr_interrupt,
+ IRQF_DISABLED, "PCI error",
+ (void *)TX4927_PCIC_REG))
+ printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/kernel.h>
+#include <linux/interrupt.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4938.h>
}
return -1;
}
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+ if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+ tx4927_pcierr_interrupt,
+ IRQF_DISABLED, "PCI error",
+ (void *)TX4927_PCIC_REG))
+ printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
#endif
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
{
+ if (pcibios_plat_setup)
+ return pcibios_plat_setup(str);
return str;
}
#include <msp_int.h>
#include <msp_regs.h>
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
- volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
- uint32_t val = (uint32_t)c;
-
- local_irq_disable();
- while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
- uart[0] = val;
- while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
- local_irq_enable();
-
- return 1;
-}
-
-char getDebugChar(void)
-{
- volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
- uint32_t val;
-
- while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
- val = uart[0];
-
- return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
- unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
- /* Enable FIFOs */
- writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
- UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
- (char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
- /* Select brtc divisor */
- writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
- /* Store divisor lsb */
- writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
- /* Store divisor msb */
- writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
- /* Set 8N1 mode */
- writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
- /* Disable flow control */
- writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
- /* Disable receive interrupt(!) */
- writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
void __init msp_serial_setup(void)
{
char *s;
case MACH_MSP7120_FPGA:
/* Enable UART1 on MSP4200 and MSP7120 */
*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
- /* Initialize UART1 for kgdb since PMON doesn't */
- if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
- if( mips_machtype == MACH_MSP4200_FPGA
- || mips_machtype == MACH_MSP7120_FPGA )
- initDebugPort(uartclk, 19200);
- else
- initDebugPort(uartclk, 57600);
- }
-#endif
break;
default:
obj-y += irq.o prom.o py-console.o setup.o
-obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_SMP) += smp.o
EXTRA_CFLAGS += -Werror
+++ /dev/null
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define YOSEMITE_BAUD_2400 2400
-#define YOSEMITE_BAUD_4800 4800
-#define YOSEMITE_BAUD_9600 9600
-#define YOSEMITE_BAUD_19200 19200
-#define YOSEMITE_BAUD_38400 38400
-#define YOSEMITE_BAUD_57600 57600
-#define YOSEMITE_BAUD_115200 115200
-
-#define YOSEMITE_PARITY_NONE 0
-#define YOSEMITE_PARITY_ODD 0x08
-#define YOSEMITE_PARITY_EVEN 0x18
-#define YOSEMITE_PARITY_MARK 0x28
-#define YOSEMITE_PARITY_SPACE 0x38
-
-#define YOSEMITE_DATA_5BIT 0x0
-#define YOSEMITE_DATA_6BIT 0x1
-#define YOSEMITE_DATA_7BIT 0x2
-#define YOSEMITE_DATA_8BIT 0x3
-
-#define YOSEMITE_STOP_1BIT 0x0
-#define YOSEMITE_STOP_2BIT 0x4
-
-/* This is crucial */
-#define SERIAL_REG_OFS 0x1
-
-#define SERIAL_RCV_BUFFER 0x0
-#define SERIAL_TRANS_HOLD 0x0
-#define SERIAL_SEND_BUFFER 0x0
-#define SERIAL_INTR_ENABLE (1 * SERIAL_REG_OFS)
-#define SERIAL_INTR_ID (2 * SERIAL_REG_OFS)
-#define SERIAL_DATA_FORMAT (3 * SERIAL_REG_OFS)
-#define SERIAL_LINE_CONTROL (3 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_CONTROL (4 * SERIAL_REG_OFS)
-#define SERIAL_RS232_OUTPUT (4 * SERIAL_REG_OFS)
-#define SERIAL_LINE_STATUS (5 * SERIAL_REG_OFS)
-#define SERIAL_MODEM_STATUS (6 * SERIAL_REG_OFS)
-#define SERIAL_RS232_INPUT (6 * SERIAL_REG_OFS)
-#define SERIAL_SCRATCH_PAD (7 * SERIAL_REG_OFS)
-
-#define SERIAL_DIVISOR_LSB (0 * SERIAL_REG_OFS)
-#define SERIAL_DIVISOR_MSB (1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define SERIAL_READ(ofs) (*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE + ofs)))
-
-#define SERIAL_WRITE(ofs, val) ((*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE_1 + ofs)))
-
-#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
- /* Disable Interrupts */
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
- SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
- {
- unsigned int divisor;
-
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
- divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
- SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
- SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
- (divisor & 0xff00) >> 8);
- SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
- }
-
- SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
- YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
- /* Enable Interrupts */
- SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
- unsigned char stop)
-{
- /* Disable Interrupts */
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
- SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
- {
- unsigned int divisor;
-
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
- divisor = TITAN_SERIAL_BASE_BAUD / baud;
- SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
- SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
- SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
- }
-
- SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(YOSEMITE_BAUD_115200,
- YOSEMITE_DATA_8BIT,
- YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
- }
-
- while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
- return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(YOSEMITE_BAUD_115200,
- YOSEMITE_DATA_8BIT,
- YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
- }
-
- while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
- SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
- return 1;
-}
}
}
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
/*
* Initialize the next level interrupt handler
*/
rm7k_cpu_irq_init();
rm9k_cpu_irq_init();
-#ifdef CONFIG_KGDB
- /* At this point, initialize the second serial port */
- init_second_port();
-#endif
-
#ifdef CONFIG_GDB_CONSOLE
register_gdb_console();
#endif
void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
{
- unsigned flags, data;
+ unsigned long flags;
+ unsigned data;
unsigned i = 0;
spin_lock_irqsave(&dev3.lock, flags);
void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
{
- unsigned flags;
+ unsigned long flags;
spin_lock_irqsave(&dev3.lock, flags);
void __init plat_time_init(void)
{
- unsigned int est_freq, flags;
- unsigned long r4k_offset;
+ unsigned int est_freq;
+ unsigned long flags, r4k_offset;
local_irq_save(flags);
#include <asm/irq.h>
#include <asm/reboot.h>
#include <asm/time.h>
-#include <asm/gdb-stub.h>
#include <asm/io.h>
#include <asm/traps.h>
#include <asm/sgialib.h>
add_preferred_console("arc", 0, NULL);
}
-#ifdef CONFIG_KGDB
- {
- char *kgdb_ttyd = prom_getcmdline();
-
- if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
- int line;
- kgdb_ttyd += strlen("kgdb=ttyd");
- if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
- printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
- ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
- line = *kgdb_ttyd == '2' ? 0 : 1;
- printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
- "session\n", line ? 1 : 2);
- rs_kgdb_hook(line);
-
- printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
- "session, please connect your debugger\n", line ? 1:2);
-
- kgdb_enabled = 1;
- /* Breakpoints and stuff are in sgi_irq_setup() */
- }
- }
-#endif
-
#if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
{
ULONG *gfxinfo;
ip27-xtalk.o
obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o
-obj-$(CONFIG_KGDB) += ip27-dbgio.o
obj-$(CONFIG_SMP) += ip27-smp.o
EXTRA_CFLAGS += -Werror
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK (22000000 / 3)
-#define IOC3_FLAGS (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
- struct ioc3 *ioc3;
-
- ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
- return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
- struct ioc3_uartregs *uart = console_uart();
-
- while ((uart->iu_lsr & UART_LSR_DR) == 0);
- return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
- struct ioc3_uartregs *uart = console_uart();
-
- while ((uart->iu_lsr & UART_LSR_THRE) == 0);
- uart->iu_thr = c;
-}
extern unsigned long ht_eoi_space;
#endif
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
- kgdb_flag = 0;
- return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
static struct irq_chip bcm1480_irq_type = {
.name = "BCM1480-IMR",
.ack = ack_bcm1480_irq,
* does its own management of IP7.
*/
-#ifdef CONFIG_KGDB
- imask |= STATUSF_IP6;
-#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
- sb1250_duart_present[kgdb_port] = 0;
-#endif
- /* Setup uart 1 settings, mapper */
- /* QQQ FIXME */
- __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
- __raw_writeq(IMR_IP6_VAL,
- IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
- (kgdb_irq << 3)));
- bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
- register_gdb_console();
-#endif
- printk("Waiting for GDB on UART port %d\n", kgdb_port);
- set_debug_traps();
- breakpoint();
- }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
- /*
- * Clear break-change status (allow some time for the remote
- * host to stop the break, since we would see another
- * interrupt on the end-of-break too)
- */
- kstat.irqs[smp_processor_id()][kgdb_irq]++;
- mdelay(500);
- duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
- M_DUART_RX_EN | M_DUART_TX_EN);
- set_async_breakpoint(&get_irq_regs()->cp0_epc);
}
-#endif /* CONFIG_KGDB */
-
extern void bcm1480_mailbox_interrupt(void);
static inline void dispatch_ip2(void)
bcm1480_mailbox_interrupt();
#endif
-#ifdef CONFIG_KGDB
- else if (pending & CAUSEF_IP6)
- bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */
-#endif
-
else if (pending & CAUSEF_IP2)
dispatch_ip2();
}
extern unsigned long initrd_start, initrd_end;
#endif
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
static void __noreturn cfe_linux_exit(void *arg)
{
int warm = *(int *)arg;
int argc = fw_arg0;
char **envp = (char **) fw_arg2;
int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
- char *arg;
-#endif
_machine_restart = cfe_linux_restart;
_machine_halt = cfe_linux_halt;
}
}
-#ifdef CONFIG_KGDB
- if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
- kgdb_port = (arg[10] == '0') ? 0 : 1;
- else
- kgdb_port = 1;
-#endif
-
#ifdef CONFIG_BLK_DEV_INITRD
{
char *ptr;
extern unsigned long ldt_eoi_space;
#endif
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
static struct irq_chip sb1250_irq_type = {
.name = "SB1250-IMR",
.ack = ack_sb1250_irq,
* does its own management of IP7.
*/
-#ifdef CONFIG_KGDB
- imask |= STATUSF_IP6;
-#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
- if (kgdb_flag) {
- kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
- sb1250_duart_present[kgdb_port] = 0;
-#endif
- /* Setup uart 1 settings, mapper */
- __raw_writeq(M_DUART_IMR_BRK,
- IOADDR(A_DUART_IMRREG(kgdb_port)));
-
- __raw_writeq(IMR_IP6_VAL,
- IOADDR(A_IMR_REGISTER(0,
- R_IMR_INTERRUPT_MAP_BASE) +
- (kgdb_irq << 3)));
- sb1250_unmask_irq(0, kgdb_irq);
- }
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
- /*
- * Clear break-change status (allow some time for the remote
- * host to stop the break, since we would see another
- * interrupt on the end-of-break too)
- */
- kstat_this_cpu.irqs[kgdb_irq]++;
- mdelay(500);
- duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
- M_DUART_RX_EN | M_DUART_TX_EN);
- set_async_breakpoint(&get_irq_regs()->cp0_epc);
}
-#endif /* CONFIG_KGDB */
-
extern void sb1250_mailbox_interrupt(void);
static inline void dispatch_ip2(void)
sb1250_mailbox_interrupt();
#endif
-#ifdef CONFIG_KGDB
- else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */
- sb1250_kgdb_interrupt();
-#endif
-
else if (pending & CAUSEF_IP2)
dispatch_ip2();
else
obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o
obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o
-obj-$(CONFIG_KGDB) += dbg_io.o
+++ /dev/null
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 115200, 8, N, 1.
- */
-
-#define BAUD_RATE 115200
-#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE)
-#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */
-#define PARITY V_DUART_PARITY_MODE_NONE /* or even */
-#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */
-
-static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
- duart_out(R_DUART_MODE_REG_1, data | parity);
- duart_out(R_DUART_MODE_REG_2, stop);
- duart_out(R_DUART_CLK_SEL, clk_divisor);
-
- duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
- if (!duart_initialized) {
- duart_initialized = 1;
- duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
- }
- while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
- duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
- if (!duart_initialized) {
- duart_initialized = 1;
- duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
- }
- while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
- return duart_in(R_DUART_RX_HOLD);
-}
-
+config MACH_TX39XX
+ bool
+ select MACH_TXX9
+ select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+ bool
+ select MACH_TXX9
+ select CEVT_R4K
+ select CSRC_R4K
+ select IRQ_CPU
+ select SYS_HAS_CPU_TX49XX
+ select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+ bool
+ select DMA_NONCOHERENT
+ select SWAP_IO_SPACE
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+
config TOSHIBA_JMR3927
bool "Toshiba JMR-TX3927 board"
depends on MACH_TX39XX
config SOC_TX3927
bool
select CEVT_TXX9
- select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
select IRQ_TXX9
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX39XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config SOC_TX4927
bool
- select CEVT_R4K
- select CSRC_R4K
select CEVT_TXX9
- select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX49XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config SOC_TX4938
bool
- select CEVT_R4K
- select CSRC_R4K
select CEVT_TXX9
- select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
- select IRQ_CPU
select IRQ_TXX9
select PCI_TX4927
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_TX49XX
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_KGDB
- select GENERIC_HARDIRQS_NO__DO_IRQ
select GPIO_TXX9
config TOSHIBA_FPCIB0
bool "FPCIB0 Backplane Support"
- depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+ depends on PCI && MACH_TXX9
select I8259
config PICMG_PCI_BACKPLANE_DEFAULT
bool "Support for PICMG PCI Backplane"
- depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+ depends on PCI && MACH_TXX9
default y if !TOSHIBA_FPCIB0
if TOSHIBA_RBTX4938
obj-y += setup.o
obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o
obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o
obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o
obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB) += dbgio.o
EXTRA_CFLAGS += -Werror
+++ /dev/null
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
- return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
- return (txx9_sio_kdbg_wr(byte));
-}
-
--- /dev/null
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+ int i;
+
+ txx9_irq_init(TX3927_IRC_REG);
+ /* raise priority for timers, sio */
+ for (i = 0; i < TX3927_NR_TMR; i++)
+ txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+ for (i = 0; i < TX3927_NR_SIO; i++)
+ txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
{
return txx9_board_vec->pci_map_irq(dev, slot, pin);
}
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+ if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+ return NULL;
+ if (!strcmp(str, "picmg")) {
+ /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+ (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+ txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+ return NULL;
+ } else if (!strcmp(str, "nopicmg")) {
+ /* non-PICMG compliant backplane (TOSHIBA
+ RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+ txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+ return NULL;
+ } else if (!strncmp(str, "clk=", 4)) {
+ char *val = str + 4;
+ txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+ if (strcmp(val, "33") == 0)
+ txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+ else if (strcmp(val, "66") == 0)
+ txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+ else /* "auto" */
+ txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+ return NULL;
+ } else if (!strncmp(str, "err=", 4)) {
+ if (!strcmp(str + 4, "panic"))
+ txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+ else if (!strcmp(str + 4, "ignore"))
+ txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+ return NULL;
+ }
+ return str;
+}
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
+#include <asm/reboot.h>
#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
#ifdef CONFIG_CPU_TX49XX
#include <asm/txx9/tx4938.h>
#endif
return &(arcs_cmdline[0]);
}
+static void __noreturn txx9_machine_halt(void)
+{
+ local_irq_disable();
+ clear_c0_status(ST0_IM);
+ while (1) {
+ if (cpu_wait) {
+ (*cpu_wait)();
+ if (cpu_has_counter) {
+ /*
+ * Clear counter interrupt while it
+ * breaks WAIT instruction even if
+ * masked.
+ */
+ write_c0_compare(0);
+ }
+ }
+ }
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+ struct resource res = {
+ .start = base,
+ .end = base + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ };
+ platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+ struct resource res[] = {
+ {
+ .start = base,
+ .end = base + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ platform_device_register_simple("spi_txx9", busid,
+ res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+ struct platform_device *pdev =
+ platform_device_alloc("tc35815-mac", id);
+ if (!pdev ||
+ platform_device_add_data(pdev, ethaddr, 6) ||
+ platform_device_add(pdev))
+ platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+ unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+ struct uart_port req;
+
+ memset(&req, 0, sizeof(req));
+ req.line = line;
+ req.iotype = UPIO_MEM;
+ req.membase = ioremap(baseaddr, 0x24);
+ req.mapbase = baseaddr;
+ req.irq = irq;
+ if (!nocts)
+ req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+ if (sclk) {
+ req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+ req.uartclk = sclk;
+ } else
+ req.uartclk = TXX9_IMCLK;
+ early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+ txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR 0x0c
+#define TXX9_SITFIFO 0x1c
+#define TXX9_SICISR_TXALS 0x00000002
+ while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+ TXX9_SICISR_TXALS))
+ ;
+ __raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+ early_txx9_sio_port = ioremap(baseaddr, 0x24);
+ txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
/* wrappers */
void __init plat_mem_setup(void)
{
ioport_resource.end = ~0UL; /* no limit */
iomem_resource.start = 0;
iomem_resource.end = ~0UL; /* no limit */
+
+ /* fallback restart/halt routines */
+ _machine_restart = (void (*)(char *))txx9_machine_halt;
+ _machine_halt = txx9_machine_halt;
+ pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+ pcibios_plat_setup = txx9_pcibios_setup;
+#endif
txx9_board_vec->mem_setup();
}
--- /dev/null
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+ txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+ int i;
+ unsigned int conf;
+
+ /* don't enable - see errata */
+ txx9_ccfg_toeon = 0;
+ if (strstr(prom_getcmdline(), "toeon") != NULL)
+ txx9_ccfg_toeon = 1;
+
+ txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+ TX3927_REG_SIZE);
+
+ /* SDRAMC,ROMC are configured by PROM */
+ for (i = 0; i < 8; i++) {
+ if (!(tx3927_romcptr->cr[i] & 0x8))
+ continue; /* disabled */
+ txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+ txx9_ce_res[i].end =
+ txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+ request_resource(&iomem_resource, &txx9_ce_res[i]);
+ }
+
+ /* clocks */
+ txx9_gbus_clock = txx9_cpu_clock / 2;
+ /* change default value to udelay/mdelay take reasonable time */
+ loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+ /* CCFG */
+ /* enable Timeout BusError */
+ if (txx9_ccfg_toeon)
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+ /* clear BusErrorOnWrite flag */
+ tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+ if (read_c0_conf() & TX39_CONF_WBON)
+ /* Disable PCI snoop */
+ tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+ else
+ /* Enable PCI SNOOP - with write through only */
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+ /* do reset on watchdog */
+ tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+ printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+ tx3927_ccfgptr->crir,
+ tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+ /* TMR */
+ for (i = 0; i < TX3927_NR_TMR; i++)
+ txx9_tmr_init(TX3927_TMR_REG(i));
+
+ /* DMA */
+ tx3927_dmaptr->mcr = 0;
+ for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+ /* reset channel */
+ tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+ tx3927_dmaptr->ch[i].ccr = 0;
+ }
+ /* enable DMA */
+#ifdef __BIG_ENDIAN
+ tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+ tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+ /* PIO */
+ __raw_writel(0, &tx3927_pioptr->maskcpu);
+ __raw_writel(0, &tx3927_pioptr->maskext);
+ txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+ conf = read_c0_conf();
+ if (!(conf & TX39_CONF_ICE))
+ printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+ if (!(conf & TX39_CONF_DCE))
+ printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+ else if (!(conf & TX39_CONF_WBON))
+ printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+ else if (!(conf & TX39_CONF_CWFON))
+ printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+ else
+ printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+ txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+ TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+ TXX9_IMCLK);
+ txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+ int i;
+
+ for (i = 0; i < 2; i++)
+ txx9_sio_init(TX3927_SIO_REG(i),
+ TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+ i, sclk, (1 << i) & cts_mask);
+}
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/serial_core.h>
#include <linux/param.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4927.h>
-void __init tx4927_wdr_init(void)
+static void __init tx4927_wdr_init(void)
{
/* clear WatchDogReset (W1C) */
tx4927_ccfg_set(TX4927_CCFG_WDRST);
tx4927_ccfg_set(TX4927_CCFG_WR);
}
+void __init tx4927_wdt_init(void)
+{
+ txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
static struct resource tx4927_sdram_resource[4];
void __init tx4927_setup(void)
TXX9_IMCLK);
}
-void __init tx4927_setup_serial(void)
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
{
-#ifdef CONFIG_SERIAL_TXX9
int i;
- struct uart_port req;
-
- for (i = 0; i < 2; i++) {
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
- req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
- req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = TXX9_IMCLK;
- early_serial_txx9_setup(&req);
- }
-#endif /* CONFIG_SERIAL_TXX9 */
+
+ for (i = 0; i < 2; i++)
+ txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+ i, sclk, (1 << i) & cts_mask);
}
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/serial_core.h>
#include <linux/param.h>
#include <asm/txx9irq.h>
#include <asm/txx9tmr.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/tx4938.h>
-void __init tx4938_wdr_init(void)
+static void __init tx4938_wdr_init(void)
{
/* clear WatchDogReset (W1C) */
tx4938_ccfg_set(TX4938_CCFG_WDRST);
tx4938_ccfg_set(TX4938_CCFG_WR);
}
+void __init tx4938_wdt_init(void)
+{
+ txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
static struct resource tx4938_sdram_resource[4];
static struct resource tx4938_sram_resource;
TXX9_IMCLK);
}
-void __init tx4938_setup_serial(void)
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
{
-#ifdef CONFIG_SERIAL_TXX9
int i;
- struct uart_port req;
unsigned int ch_mask = 0;
if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
for (i = 0; i < 2; i++) {
if ((1 << i) & ch_mask)
continue;
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
- req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
- req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = TXX9_IMCLK;
- early_serial_txx9_setup(&req);
+ txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+ i, sclk, (1 << i) & cts_mask);
}
-#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+void __init tx4938_spi_init(int busid)
+{
+ txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+ TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+ u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+ if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+ txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+ if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+ txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
}
#include <asm/io.h>
#include <asm/txx9/smsc_fdc37m81x.h>
-#define DEBUG
-
/* Common Registers */
#define SMSC_FDC37M81X_CONFIG_INDEX 0x00
#define SMSC_FDC37M81X_CONFIG_DATA 0x01
#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa
#define SMSC_FDC37M81X_CHIP_ID 0x4d
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
{
u8 chip_id;
if (g_smsc_fdc37m81x_base)
- printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+ printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+ __func__,
field, g_smsc_fdc37m81x_base);
g_smsc_fdc37m81x_base = port;
if (chip_id == SMSC_FDC37M81X_CHIP_ID)
smsc_fdc37m81x_config_end();
else {
- printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+ printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
chip_id);
g_smsc_fdc37m81x_base = 0;
}
}
#ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
{
- printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+ printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+ key, dev, reg,
smsc_fdc37m81x_rd(reg));
}
void smsc_fdc37m81x_config_dump(void)
{
u8 orig;
- char *fname = "smsc_fdc37m81x_config_dump()";
+ const char *fname = __func__;
smsc_fdc37m81x_config_beg();
orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
- printk("%s: common\n", fname);
+ printk(KERN_INFO "%s: common\n", fname);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
SMSC_FDC37M81X_DNUM);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
SMSC_FDC37M81X_PMGT);
- printk("%s: keyboard\n", fname);
+ printk(KERN_INFO "%s: keyboard\n", fname);
smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
SMSC_FDC37M81X_ACTIVE);
#
obj-y += prom.o irq.o setup.o
-obj-$(CONFIG_KGDB) += kgdb_io.o
EXTRA_CFLAGS += -Werror
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
-#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
#error JMR3927_IRQ_END > NR_IRQS
#endif
-static unsigned char irc_level[TX3927_NUM_IR] = {
- 5, 5, 5, 5, 5, 5, /* INT[5:0] */
- 7, 7, /* SIO */
- 5, 5, 5, 0, 0, /* DMA, PIO, PCI */
- 6, 6, 6 /* TMR */
-};
-
/*
* CP0_STATUS is a thread's resource (saved/restored on context switch).
* So disable_irq/enable_irq MUST handle IOC/IRC registers.
return irq;
}
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
- printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
- printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
- tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
- return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
- .handler = jmr3927_pcierr_interrupt,
- .mask = CPU_MASK_NONE,
- .name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+ .name = "jmr3927_ioc",
+ .ack = mask_irq_ioc,
+ .mask = mask_irq_ioc,
+ .mask_ack = mask_irq_ioc,
+ .unmask = unmask_irq_ioc,
};
-#endif
-
-static void __init jmr3927_irq_init(void);
void __init jmr3927_irq_setup(void)
{
+ int i;
+
txx9_irq_dispatch = jmr3927_irq_dispatch;
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
/* clear PCI Reset interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
- jmr3927_irq_init();
+ tx3927_irq_init();
+ for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+ set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
/* setup IOC interrupt 1 (PCI, MODEM) */
set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
- setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
- /* enable all CPU interrupt bits. */
- set_c0_status(ST0_IM); /* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
- .name = "jmr3927_ioc",
- .ack = mask_irq_ioc,
- .mask = mask_irq_ioc,
- .mask_ack = mask_irq_ioc,
- .unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
- u32 i;
-
- txx9_irq_init(TX3927_IRC_REG);
- for (i = 0; i < TXx9_MAX_IR; i++)
- txx9_irq_set_pri(i, irc_level[i]);
- for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
- set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
}
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT 0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
- int i = 0;
-
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(38400);
- }
-
- do {
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
- tx3927_sioptr(0)->tfifo = c;
-
- return 1;
-}
-
-unsigned char getDebugChar(void)
-{
- int i = 0;
- int dicr;
- char c;
-
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(38400);
- }
-
- /* diable RX int. */
- dicr = tx3927_sioptr(0)->dicr;
- tx3927_sioptr(0)->dicr = 0;
-
- do {
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
- ;
- c = tx3927_sioptr(0)->rfifo;
-
- /* clear RX int. status */
- tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
- /* enable RX int. */
- tx3927_sioptr(0)->dicr = dicr;
-
- return c;
-}
-
-static void debugInit(int baud)
-{
- tx3927_sioptr(0)->lcr = 0x020;
- tx3927_sioptr(0)->dicr = 0;
- tx3927_sioptr(0)->disr = 0x4100;
- tx3927_sioptr(0)->cisr = 0x014;
- tx3927_sioptr(0)->fcr = 0;
- tx3927_sioptr(0)->flcr = 0x02;
- tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
- TXx927_SIBGR_BCLK_T0;
-}
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
+#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
-#define TIMEOUT 0xffffff
-
-void
-prom_putchar(char c)
-{
- int i = 0;
-
- do {
- i++;
- if (i>TIMEOUT)
- break;
- } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
- tx3927_sioptr(1)->tfifo = c;
- return;
-}
-
-void
-puts(const char *cp)
-{
- while (*cp)
- prom_putchar(*cp++);
- prom_putchar('\r');
- prom_putchar('\n');
-}
-
void __init jmr3927_prom_init(void)
{
/* CCFG */
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
- puts("Warning: TX3927 TLB off\n");
+ printk(KERN_ERR "TX3927 TLB off\n");
prom_init_cmdline();
add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+ txx9_sio_putchar_init(TX3927_SIO_REG(1));
}
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
#include <asm/reboot.h>
+#include <asm/txx9pio.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
#include <asm/mipsregs.h>
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
{
+ local_irq_disable();
#if 1 /* Resetting PCI bus */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
#endif
jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
- local_irq_disable();
- puts("Rebooting...");
- do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
- puts("JMR-TX3927 halted.\n");
- while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
- puts("JMR-TX3927 halted. Please turn off the power.\n");
- while (1);
+ /* fallback */
+ (*_machine_halt)();
}
static void __init jmr3927_time_init(void)
{
- txx9_clockevent_init(TX3927_TMR_REG(0),
- TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
- JMR3927_IMCLK);
- txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+ tx3927_time_init(0, 1);
}
#define DO_WRITE_THROUGH
set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
_machine_restart = jmr3927_machine_restart;
- _machine_halt = jmr3927_machine_halt;
- pm_power_off = jmr3927_machine_power_off;
-
- /* Reboot on panic */
- panic_timeout = 180;
/* cache setup */
{
#endif
conf = read_c0_conf();
- conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+ conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+ TX39_CONF_WBON | TX39_CONF_CWFON);
conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
/* initialize board */
jmr3927_board_init();
- argptr = prom_getcmdline();
-
- if ((argptr = strstr(argptr, "toeon")) != NULL)
- jmr3927_ccfg_toeon = 1;
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "ip=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " ip=bootp");
- }
-
-#ifdef CONFIG_SERIAL_TXX9
- {
- extern int early_serial_txx9_setup(struct uart_port *port);
- int i;
- struct uart_port req;
- for(i = 0; i < 2; i++) {
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
- req.mapbase = TX3927_SIO_REG(i);
- req.irq = i == 0 ?
- JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
- if (i == 0)
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = JMR3927_IMCLK;
- early_serial_txx9_setup(&req);
- }
- }
+ tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=")) == NULL) {
- argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
strcat(argptr, " console=ttyS1,115200");
- }
-#endif
#endif
}
-static void tx3927_setup(void);
-
static void __init jmr3927_pci_setup(void)
{
#ifdef CONFIG_PCI
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
}
tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+ tx3927_setup_pcierr_irq();
#endif /* CONFIG_PCI */
}
static void __init jmr3927_board_init(void)
{
- tx3927_setup();
- jmr3927_pci_setup();
-
- /* SIO0 DTR on */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
- jmr3927_led_set(0);
-
- printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
- jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
- jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
- jmr3927_dipsw1(), jmr3927_dipsw2(),
- jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
- int i;
-
txx9_cpu_clock = JMR3927_CORECLK;
- txx9_gbus_clock = JMR3927_GBUSCLK;
/* SDRAMC are configured by PROM */
/* ROMC */
tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
- /* CCFG */
- /* enable Timeout BusError */
- if (jmr3927_ccfg_toeon)
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
- /* clear BusErrorOnWrite flag */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
- /* Disable PCI snoop */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
- /* do reset on watchdog */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
- /* Enable PCI SNOOP - with write through only */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
/* Pin selection */
tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
tx3927_ccfgptr->pcfg |=
TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
- printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
- tx3927_ccfgptr->crir,
- tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
- /* TMR */
- for (i = 0; i < TX3927_NR_TMR; i++)
- txx9_tmr_init(TX3927_TMR_REG(i));
-
- /* DMA */
- tx3927_dmaptr->mcr = 0;
- for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
- /* reset channel */
- tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
- tx3927_dmaptr->ch[i].ccr = 0;
- }
- /* enable DMA */
-#ifdef __BIG_ENDIAN
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+ tx3927_setup();
- /* PIO */
/* PIO[15:12] connected to LEDs */
__raw_writel(0x0000f000, &tx3927_pioptr->dir);
- __raw_writel(0, &tx3927_pioptr->maskcpu);
- __raw_writel(0, &tx3927_pioptr->maskext);
- txx9_gpio_init(TX3927_PIO_REG, 0, 16);
gpio_request(11, "dipsw1");
gpio_request(10, "dipsw2");
- {
- unsigned int conf;
- conf = read_c0_conf();
- if (!(conf & TX39_CONF_ICE))
- printk("TX3927 I-Cache disabled.\n");
- if (!(conf & TX39_CONF_DCE))
- printk("TX3927 D-Cache disabled.\n");
- else if (!(conf & TX39_CONF_WBON))
- printk("TX3927 D-Cache WriteThrough.\n");
- else if (!(conf & TX39_CONF_CWFON))
- printk("TX3927 D-Cache WriteBack.\n");
- else
- printk("TX3927 D-Cache WriteBack (CWF) .\n");
- }
+ jmr3927_pci_setup();
+
+ /* SIO0 DTR on */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+ jmr3927_led_set(0);
+
+ printk(KERN_INFO
+ "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+ jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_dipsw1(), jmr3927_dipsw2(),
+ jmr3927_dipsw3(), jmr3927_dipsw4());
}
/* This trick makes rtc-ds1742 driver usable as is. */
#endif
}
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
{
static struct resource __initdata res = {
.start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
.end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
- struct platform_device *dev;
- dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
- return txx9_wdt_init(TX3927_TMR_REG(2));
+ platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
static void __init jmr3927_device_init(void)
{
__swizzle_addr_b = jmr3927_swizzle_addr_b;
jmr3927_rtc_init();
- jmr3927_wdt_init();
+ tx3927_wdt_init();
}
struct txx9_board_vec jmr3927_vec __initdata = {
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
-IRQ Device
-00 RBTX4927-ISA/00
-01 RBTX4927-ISA/01 PS2/Keyboard
-02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03 RBTX4927-ISA/03
-04 RBTX4927-ISA/04
-05 RBTX4927-ISA/05
-06 RBTX4927-ISA/06
-07 RBTX4927-ISA/07
-08 RBTX4927-ISA/08
-09 RBTX4927-ISA/09
-10 RBTX4927-ISA/10
-11 RBTX4927-ISA/11
-12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13 RBTX4927-ISA/13
-14 RBTX4927-ISA/14 IDE
-15 RBTX4927-ISA/15
-
-16 TX4927-CP0/00 Software 0
-17 TX4927-CP0/01 Software 1
-18 TX4927-CP0/02 Cascade TX4927-CP0
-19 TX4927-CP0/03 Multiplexed -- do not use
-20 TX4927-CP0/04 Multiplexed -- do not use
-21 TX4927-CP0/05 Multiplexed -- do not use
-22 TX4927-CP0/06 Multiplexed -- do not use
-23 TX4927-CP0/07 CPU TIMER
-
-24 TX4927-PIC/00
-25 TX4927-PIC/01
-26 TX4927-PIC/02
-27 TX4927-PIC/03 Cascade RBTX4927-IOC
-28 TX4927-PIC/04
-29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30 TX4927-PIC/06
-31 TX4927-PIC/07
-32 TX4927-PIC/08 TX4927 SerialIO Channel 0
-33 TX4927-PIC/09 TX4927 SerialIO Channel 1
-34 TX4927-PIC/10
-35 TX4927-PIC/11
-36 TX4927-PIC/12
-37 TX4927-PIC/13
-38 TX4927-PIC/14
-39 TX4927-PIC/15
-40 TX4927-PIC/16 TX4927 PCI PCI-C
-41 TX4927-PIC/17
-42 TX4927-PIC/18
-43 TX4927-PIC/19
-44 TX4927-PIC/20
-45 TX4927-PIC/21
-46 TX4927-PIC/22 TX4927 PCI PCI-ERR
-47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48 TX4927-PIC/24
-49 TX4927-PIC/25
-50 TX4927-PIC/26
-51 TX4927-PIC/27
-52 TX4927-PIC/28
-53 TX4927-PIC/29
-54 TX4927-PIC/30
-55 TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
#include <linux/init.h>
#include <linux/types.h>
level3 = readb(rbtx4927_imstat_addr) & 0x1f;
if (level3)
sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
- return (sw_irq);
+ return sw_irq;
}
static void __init toshiba_rbtx4927_irq_ioc_init(void)
{
prom_init_cmdline();
add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+ txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
}
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/io.h>
-#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
tx4927_report_pciclk();
tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
}
+ tx4927_setup_pcierr_irq();
}
static void __init tx4937_pci_setup(void)
tx4938_report_pciclk();
tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
}
+ tx4938_setup_pcierr_irq();
}
static void __init rbtx4927_arch_init(void)
#define rbtx4937_arch_init NULL
#endif /* CONFIG_PCI */
-static void __noreturn wait_forever(void)
-{
- while (1)
- if (cpu_wait)
- (*cpu_wait)();
-}
-
static void toshiba_rbtx4927_restart(char *command)
{
- printk(KERN_NOTICE "System Rebooting...\n");
-
/* enable the s/w reset register */
writeb(1, rbtx4927_softresetlock_addr);
/* do a s/w reset */
writeb(1, rbtx4927_softreset_addr);
- /* do something passive while waiting for reset */
- local_irq_disable();
- wait_forever();
- /* no return */
-}
-
-static void toshiba_rbtx4927_halt(void)
-{
- printk(KERN_NOTICE "System Halted\n");
- local_irq_disable();
- wait_forever();
- /* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
- toshiba_rbtx4927_halt();
- /* no return */
+ /* fallback */
+ (*_machine_halt)();
}
static void __init rbtx4927_clock_init(void);
u32 cp0_config;
char *argptr;
- /* f/w leaves this on at startup */
- clear_c0_status(ST0_ERL);
-
/* enable caches -- HCP5 does this, pmon does not */
cp0_config = read_c0_config();
cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
}
_machine_restart = toshiba_rbtx4927_restart;
- _machine_halt = toshiba_rbtx4927_halt;
- pm_power_off = toshiba_rbtx4927_power_off;
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic,
RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+ txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
#endif
- tx4927_setup_serial();
+ tx4927_sio_init(0, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (strstr(argptr, "console=") == NULL) {
- strcat(argptr, " console=ttyS0,38400");
- }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
- argptr = prom_getcmdline();
- if (strstr(argptr, "root=") == NULL) {
- strcat(argptr, " root=/dev/nfs rw");
- }
-#endif
-
-#ifdef CONFIG_IP_PNP
- argptr = prom_getcmdline();
- if (strstr(argptr, "ip=") == NULL) {
- strcat(argptr, " ip=any");
- }
+ argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
+ strcat(argptr, " console=ttyS0,38400");
#endif
}
tx4927_time_init(0);
}
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
{
struct resource res = {
.start = RBTX4927_BRAMRTC_BASE - IO_BASE,
.end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
- struct platform_device *dev =
- platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
{
struct resource res[] = {
{
.flags = IORESOURCE_IRQ,
}
};
- struct platform_device *dev =
- platform_device_register_simple("ne", -1,
- res, ARRAY_SIZE(res));
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
- return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+ platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static void __init rbtx4927_device_init(void)
{
toshiba_rbtx4927_rtc_init();
rbtx4927_ne_init();
- rbtx4927_wdt_init();
+ tx4927_wdt_init();
}
struct txx9_board_vec rbtx4927_vec __initdata = {
*/
/*
-IRQ Device
-
-16 TX4938-CP0/00 Software 0
-17 TX4938-CP0/01 Software 1
-18 TX4938-CP0/02 Cascade TX4938-CP0
-19 TX4938-CP0/03 Multiplexed -- do not use
-20 TX4938-CP0/04 Multiplexed -- do not use
-21 TX4938-CP0/05 Multiplexed -- do not use
-22 TX4938-CP0/06 Multiplexed -- do not use
-23 TX4938-CP0/07 CPU TIMER
-
-24 TX4938-PIC/00
-25 TX4938-PIC/01
-26 TX4938-PIC/02 Cascade RBTX4938-IOC
-27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28 TX4938-PIC/04
-29 TX4938-PIC/05 TX4938 ETH1
-30 TX4938-PIC/06 TX4938 ETH0
-31 TX4938-PIC/07
-32 TX4938-PIC/08 TX4938 SIO 0
-33 TX4938-PIC/09 TX4938 SIO 1
-34 TX4938-PIC/10 TX4938 DMA0
-35 TX4938-PIC/11 TX4938 DMA1
-36 TX4938-PIC/12 TX4938 DMA2
-37 TX4938-PIC/13 TX4938 DMA3
-38 TX4938-PIC/14
-39 TX4938-PIC/15
-40 TX4938-PIC/16 TX4938 PCIC
-41 TX4938-PIC/17 TX4938 TMR0
-42 TX4938-PIC/18 TX4938 TMR1
-43 TX4938-PIC/19 TX4938 TMR2
-44 TX4938-PIC/20
-45 TX4938-PIC/21
-46 TX4938-PIC/22 TX4938 PCIERR
-47 TX4938-PIC/23
-48 TX4938-PIC/24
-49 TX4938-PIC/25
-50 TX4938-PIC/26
-51 TX4938-PIC/27
-52 TX4938-PIC/28
-53 TX4938-PIC/29
-54 TX4938-PIC/30
-55 TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mipsregs.h>
return sw_irq;
}
-/**********************************************************************************/
-/* Functions for ioc */
-/**********************************************************************************/
static void __init
toshiba_rbtx4938_irq_ioc_init(void)
{
prom_init_cmdline();
#endif
add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+ txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
}
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/txx9/spi.h>
#include <asm/txx9pio.h>
-static void rbtx4938_machine_halt(void)
-{
- printk(KERN_NOTICE "System Halted\n");
- local_irq_disable();
-
- while (1)
- __asm__(".set\tmips3\n\t"
- "wait\n\t"
- ".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
- rbtx4938_machine_halt();
- /* no return */
-}
-
static void rbtx4938_machine_restart(char *command)
{
local_irq_disable();
-
- printk("Rebooting...");
writeb(1, rbtx4938_softresetlock_addr);
writeb(1, rbtx4938_sfvol_addr);
writeb(1, rbtx4938_softreset_addr);
- while(1)
- ;
+ /* fallback */
+ (*_machine_halt)();
}
static void __init rbtx4938_pci_setup(void)
register_pci_controller(c);
tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
}
+ tx4938_setup_pcierr_irq();
#endif /* CONFIG_PCI */
}
if (sum)
printk(KERN_WARNING "seeprom: bad checksum.\n");
}
- for (i = 0; i < 2; i++) {
- unsigned int id =
- TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
- struct platform_device *pdev;
- if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
- (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
- continue;
- pdev = platform_device_alloc("tc35815-mac", id);
- if (!pdev ||
- platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
- platform_device_add(pdev))
- platform_device_put(pdev);
- }
+ tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
#endif /* CONFIG_PCI */
return 0;
}
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+ txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(RBTX4938_ETHER_BASE);
#endif
- tx4938_setup_serial();
+ tx4938_sio_init(7372800, 0);
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (strstr(argptr, "console=") == NULL) {
- strcat(argptr, " console=ttyS0,38400");
- }
+ argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
+ strcat(argptr, " console=ttyS0,38400");
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
- printk("PIOSEL: disabling both ata and nand selection\n");
- local_irq_disable();
+ printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
txx9_clear64(&tx4938_ccfgptr->pcfg,
TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
- printk("PIOSEL: enabling nand selection\n");
+ printk(KERN_INFO "PIOSEL: enabling nand selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
- printk("PIOSEL: enabling ata selection\n");
+ printk(KERN_INFO "PIOSEL: enabling ata selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
#endif
-#ifdef CONFIG_IP_PNP
- argptr = prom_getcmdline();
- if (strstr(argptr, "ip=") == NULL) {
- strcat(argptr, " ip=any");
- }
-#endif
-
-
-#ifdef CONFIG_FB
- {
- conswitchp = &dummy_con;
- }
-#endif
-
rbtx4938_spi_setup();
pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */
/* fixup piosel */
rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
- printk("request resource for fpga failed\n");
+ printk(KERN_ERR "request resource for fpga failed\n");
_machine_restart = rbtx4938_machine_restart;
- _machine_halt = rbtx4938_machine_halt;
- pm_power_off = rbtx4938_machine_power_off;
writeb(0xff, rbtx4938_led_addr);
printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
}
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
{
struct resource res[] = {
{
.flags = IORESOURCE_IRQ,
}
};
- struct platform_device *dev =
- platform_device_register_simple("ne", -1,
- res, ARRAY_SIZE(res));
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
.ngpio = 3,
};
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
- struct resource res[] = {
- {
- .start = base,
- .end = base + 0x20 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = irq,
- .flags = IORESOURCE_IRQ,
- },
- };
- platform_device_register_simple("spi_txx9", 0,
- res, ARRAY_SIZE(res));
-}
-
static int __init rbtx4938_spi_init(void)
{
struct spi_board_info srtc_info = {
gpio_direction_output(16 + SEEPROM2_CS, 1);
gpio_request(16 + SEEPROM3_CS, "seeprom3");
gpio_direction_output(16 + SEEPROM3_CS, 1);
- txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+ tx4938_spi_init(0);
return 0;
}
rbtx4938_spi_init();
}
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
- return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
static void __init rbtx4938_device_init(void)
{
rbtx4938_ethaddr_init();
rbtx4938_ne_init();
- rbtx4938_wdt_init();
+ tx4938_wdt_init();
}
struct txx9_board_vec rbtx4938_vec __initdata = {
def_bool y
depends on SPARSEMEM
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ def_bool y
+
source "mm/Kconfig"
comment "I/O subsystem configuration"
lgfr %r2,%r2 # int
llgtr %r3,%r3 # struct compat_itimerspec *
jg compat_sys_timerfd_gettime
+
+ .globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+ lgfr %r2,%r2 # int
+ llgtr %r3,%r3 # compat_sigset_t *
+ llgfr %r4,%r4 # compat_size_t
+ lgfr %r5,%r5 # int
+ jg compat_sys_signalfd4
+
+ .globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ lgfr %r3,%r3 # int
+ jg sys_eventfd2
+
+ .globl sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+ lgfr %r2,%r2 # int
+ jg sys_inotify_init1
+
+ .globl sys_pipe2_wrapper
+sys_pipe2_wrapper:
+ llgtr %r2,%r2 # u32 *
+ lgfr %r3,%r3 # int
+ jg sys_pipe2 # branch to system call
+
+ .globl sys_dup3_wrapper
+sys_dup3_wrapper:
+ llgfr %r2,%r2 # unsigned int
+ llgfr %r3,%r3 # unsigned int
+ lgfr %r4,%r4 # int
+ jg sys_dup3 # branch to system call
+
+ .globl sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+ lgfr %r2,%r2 # int
+ jg sys_epoll_create1 # branch to system call
void __init ipl_update_parameters(void)
{
- if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+ int rc;
+
+ rc = diag308(DIAG308_STORE, &ipl_block);
+ if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
diag308_set_works = 1;
}
#include <asm/sclp.h>
#include <asm/setup.h>
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
- unsigned long val0 = 0;
- unsigned long val1 = 0xc;
- int rc = -EOPNOTSUPP;
-
- if (ipl_flags & IPL_NSS_VALID)
- return -EOPNOTSUPP;
- asm volatile(
- " diag %1,%2,0x260\n"
- "0: lhi %0,0\n"
- "1:\n"
- EX_TABLE(0b,1b)
- : "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
- if (rc || val0 != val1)
- return -EOPNOTSUPP;
- chunk->size = val0 + 1;
- return 0;
-}
-
static inline int tprot(unsigned long addr)
{
int rc = -EFAULT;
unsigned long flags, cr0;
memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
- if (memory_fast_detect(&chunk[0]) == 0)
- return;
/* Disable IRQs, DAT and low address protection so tprot does the
* right thing and we don't get scheduled away with low address
* protection disabled.
SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
/*
* Reset STP attachment.
*/
-static void stp_reset(void)
+static void __init stp_reset(void)
{
int rc;
local_bh_disable();
local_irq_save(flags);
if (raw_irqs_disabled_flags(flags)) {
- old_cc = S390_lowcore.clock_comparator;
+ old_cc = local_tick_disable();
S390_lowcore.clock_comparator = -1ULL;
__ctl_store(cr0, 0, 0);
dummy = (cr0 & 0xffff00e0) | 0x00000800;
if (raw_irqs_disabled_flags(flags)) {
__ctl_load(cr0, 0, 0);
- S390_lowcore.clock_comparator = old_cc;
+ local_tick_enable(old_cc);
}
if (!irq_context)
_local_bh_enable();
int rc;
pgdat = NODE_DATA(nid);
- zone = pgdat->node_zones + ZONE_NORMAL;
+ zone = pgdat->node_zones + ZONE_MOVABLE;
rc = vmem_add_mapping(start, size);
if (rc)
return rc;
return rc;
}
#endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+ unsigned long start_pfn, end_pfn;
+
+ start_pfn = PFN_DOWN(start);
+ end_pfn = start_pfn + PFN_DOWN(size);
+ return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
config SUPERH64
def_bool y if CPU_SH5
+config ARCH_DEFCONFIG
+ string
+ default "arch/sh/configs/shx3_defconfig" if SUPERH32
+ default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
config RWSEM_GENERIC_SPINLOCK
def_bool y
endchoice
source "arch/sh/mm/Kconfig"
+
source "arch/sh/Kconfig.cpu"
-menu "Board support"
-
-config SOLUTION_ENGINE
- bool
-
-config SH_SOLUTION_ENGINE
- bool "SolutionEngine"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
- CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
- CPU_SUBTYPE_SH7750R
- help
- Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
- SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
- bool "SolutionEngine7206"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7206
- help
- Select 7206 SolutionEngine if configuring for a Hitachi SH7206
- evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
- bool "SolutionEngine7619"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7619
- help
- Select 7619 SolutionEngine if configuring for a Hitachi SH7619
- evaluation board.
-
-config SH_7721_SOLUTION_ENGINE
- bool "SolutionEngine7721"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7721
- help
- Select 7721 SolutionEngine if configuring for a Hitachi SH7721
- evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
- bool "SolutionEngine7722"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7722
- help
- Select 7722 SolutionEngine if configuring for a Hitachi SH772
- evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
- bool "SolutionEngine7751"
- select SOLUTION_ENGINE
- select CPU_HAS_IPR_IRQ
- depends on CPU_SUBTYPE_SH7751
- help
- Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evaluation board.
-
-config SH_7780_SOLUTION_ENGINE
- bool "SolutionEngine7780"
- select SOLUTION_ENGINE
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7780
- help
- Select 7780 SolutionEngine if configuring for a Renesas SH7780
- evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
- bool "SolutionEngine7343"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7343
- help
- Select 7343 SolutionEngine if configuring for a Hitachi
- SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
- bool "SystemH7751R"
- depends on CPU_SUBTYPE_SH7751R
- help
- Select SystemH if you are configuring for a Renesas SystemH
- 7751R evaluation board.
-
-config SH_HP6XX
- bool "HP6XX"
- select SYS_SUPPORTS_APM_EMULATION
- select HD6446X_SERIES
- depends on CPU_SUBTYPE_SH7709
- help
- Select HP6XX if configuring for a HP jornada HP6xx.
- More information (hardware only) at
- <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
- bool "Dreamcast"
- select SYS_SUPPORTS_PCI
- depends on CPU_SUBTYPE_SH7091
- help
- Select Dreamcast if configuring for a SEGA Dreamcast.
- More information at <http://www.linux-sh.org>
-
-config SH_SH03
- bool "Interface CTP/PCI-SH03"
- depends on CPU_SUBTYPE_SH7751
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- CTP/PCI-SH03 is a CPU module computer that is produced
- by Interface Corporation.
- More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
- bool "SecureEdge5410"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select SecureEdge5410 if configuring for a SnapGear SH board.
- This includes both the OEM SecureEdge products as well as the
- SME product line.
-
-config SH_RTS7751R2D
- bool "RTS7751R2D"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
- help
- Select RTS7751R2D if configuring for a Renesas Technology
- Sales SH-Graphics board.
-
-config SH_RSK7203
- bool "RSK7203"
- depends on CPU_SUBTYPE_SH7203
-
-config SH_SDK7780
- bool "SDK7780R3"
- depends on CPU_SUBTYPE_SH7780
- select SYS_SUPPORTS_PCI
- help
- Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
- evaluation board.
-
-config SH_HIGHLANDER
- bool "Highlander"
- depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
-
-config SH_SH7785LCR
- bool "SH7785LCR"
- depends on CPU_SUBTYPE_SH7785
- select SYS_SUPPORTS_PCI
- select IO_TRAPPED
-
-config SH_SH7785LCR_29BIT_PHYSMAPS
- bool "SH7785LCR 29bit physmaps"
- depends on SH_SH7785LCR
- default y
- help
- This board has 2 physical memory maps. It can be changed with
- DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
- you can access all on-board device in 29bit address mode.
-
-config SH_MIGOR
- bool "Migo-R"
- depends on CPU_SUBTYPE_SH7722
- help
- Select Migo-R if configuring for the SH7722 Migo-R platform
- by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_AP325RXA
- bool "AP-325RXA"
- depends on CPU_SUBTYPE_SH7723
- help
- Renesas "AP-325RXA" support.
- Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
-
-config SH_SH7763RDP
- bool "SH7763RDP"
- depends on CPU_SUBTYPE_SH7763
- help
- Select SH7763RDP if configuring for a Renesas SH7763
- evaluation board.
-
-config SH_EDOSK7705
- bool "EDOSK7705"
- depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
- bool "SH4-202 MicroDev"
- depends on CPU_SUBTYPE_SH4_202
- help
- Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
- with an SH4-202 CPU.
-
-config SH_LANDISK
- bool "LANDISK"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
- bool "TITAN"
- depends on CPU_SUBTYPE_SH7751R
- select CPU_HAS_IPR_IRQ
- select SYS_SUPPORTS_PCI
- help
- Select Titan if you are configuring for a Nimble Microsystems
- NetEngine NP51R.
-
-config SH_SHMIN
- bool "SHMIN"
- depends on CPU_SUBTYPE_SH7706
- select CPU_HAS_IPR_IRQ
- help
- Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
- bool "L-BOX RE2"
- depends on CPU_SUBTYPE_SH7751R
- select SYS_SUPPORTS_PCI
- help
- Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
- bool "SH-X3 Prototype board"
- depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
- bool "Magic Panel R2"
- depends on CPU_SUBTYPE_SH7720
- help
- Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
- bool "Hitachi Cayman"
- depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
- select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/renesas/migor/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
defaultimage-$(CONFIG_SUPERH32) := zImage
# Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG := r7780mp_defconfig
+KBUILD_DEFCONFIG := shx3_defconfig
KBUILD_IMAGE := $(defaultimage-y)
#
LDFLAGS += -EB
endif
-KBUILD_CFLAGS += -pipe $(cflags-y)
-KBUILD_AFLAGS += $(cflags-y)
-
head-y := arch/sh/kernel/init_task.o
head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o
head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o
LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-core-y += arch/sh/kernel/ arch/sh/mm/
+core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721
-machdir-$(CONFIG_SH_HP6XX) += hp6xx
-machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
-machdir-$(CONFIG_SH_SH03) += sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
-machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR) += renesas/migor
-machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto
-machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203
-machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa
-machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp
-machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr
-machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev
-machdir-$(CONFIG_SH_LANDISK) += landisk
-machdir-$(CONFIG_SH_TITAN) += titan
-machdir-$(CONFIG_SH_SHMIN) += shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619
-machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN) += cayman
-
-incdir-y := $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
+machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
+machdir-$(CONFIG_SH_SH03) += mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
+machdir-$(CONFIG_SH_MIGOR) += mach-migor
+machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
+machdir-$(CONFIG_SH_LANDISK) += mach-landisk
+machdir-$(CONFIG_SH_TITAN) += mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
ifneq ($(machdir-y),)
core-y += $(addprefix arch/sh/boards/, \
# Companion chips
core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/
-cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5) := cpu-sh5
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5
+cpuincdir-y += cpu-common # Must be last
libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y)
libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
boot := arch/sh/boot
-ifneq ($(KBUILD_SRC),)
-incdir-prefix := $(srctree)/include/asm-sh/
-else
-incdir-prefix :=
-endif
-
-# Update machine arch and proc symlinks if something which affects
-# them changed. We use .arch and .mach to indicate when they were
-# updated last, otherwise make uses the target directory mtime.
-
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
- include/config/auto.conf FORCE
- @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
- $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
- $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
- @touch $@
+cflags-y += $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+ $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
-# Most boards have their own mach directories. For the ones that
-# don't, just reference the parent directory so the semantics are
-# kept roughly the same.
-#
-# When multiple boards are compiled in at the same time, preference
-# for the mach link is given to whichever has a directory for its
-# headers. However, this is only a workaround until platforms that
-# can live in the same kernel image back away from relying on the
-# mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
- include/config/auto.conf FORCE
- $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
- $(Q)rm -f include/asm-sh/mach
- $(Q)for i in $(incdir-y); do \
- if [ -d $(srctree)/include/asm-sh/$$i ]; then \
- echo -n ' SYMLINK include/asm-sh/mach -> '; \
- echo -e "include/asm-sh/$$i"; \
- ln -fsn $(incdir-prefix)$$i \
- include/asm-sh/mach; \
- else \
- if [ ! -d include/asm-sh/mach ]; then \
- echo -n ' SYMLINK include/asm-sh/mach -> '; \
- echo -e 'include/asm-sh'; \
- ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
- fi; \
- fi; \
- done
- @touch $@
+KBUILD_CFLAGS += -pipe $(cflags-y)
+KBUILD_CPPFLAGS += $(cflags-y)
+KBUILD_AFLAGS += $(cflags-y)
PHONY += maketools FORCE
maketools: include/linux/version.h FORCE
- $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
+ $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h
all: $(KBUILD_IMAGE)
compressed: zImage
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
- arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
$(call filechk,gen-syscalltab)
CLEAN_FILES += arch/sh/lib64/syscalltab.h \
- include/asm-sh/machtypes.h \
- include/asm-sh/cpu include/asm-sh/.cpu \
- include/asm-sh/mach include/asm-sh/.mach
+ arch/sh/include/asm/machtypes.h
--- /dev/null
+menu "Board support"
+
+config SOLUTION_ENGINE
+ bool
+
+config SH_SOLUTION_ENGINE
+ bool "SolutionEngine"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+ CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+ CPU_SUBTYPE_SH7750R
+ help
+ Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+ SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+ bool "SolutionEngine7206"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7206
+ help
+ Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+ evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+ bool "SolutionEngine7619"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7619
+ help
+ Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+ evaluation board.
+
+config SH_7721_SOLUTION_ENGINE
+ bool "SolutionEngine7721"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7721
+ help
+ Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+ evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+ bool "SolutionEngine7722"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7722
+ help
+ Select 7722 SolutionEngine if configuring for a Hitachi SH772
+ evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+ bool "SolutionEngine7751"
+ select SOLUTION_ENGINE
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7751
+ help
+ Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+ evaluation board.
+
+config SH_7780_SOLUTION_ENGINE
+ bool "SolutionEngine7780"
+ select SOLUTION_ENGINE
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7780
+ help
+ Select 7780 SolutionEngine if configuring for a Renesas SH7780
+ evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+ bool "SolutionEngine7343"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7343
+ help
+ Select 7343 SolutionEngine if configuring for a Hitachi
+ SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+ bool "SystemH7751R"
+ depends on CPU_SUBTYPE_SH7751R
+ help
+ Select SystemH if you are configuring for a Renesas SystemH
+ 7751R evaluation board.
+
+config SH_HP6XX
+ bool "HP6XX"
+ select SYS_SUPPORTS_APM_EMULATION
+ select HD6446X_SERIES
+ depends on CPU_SUBTYPE_SH7709
+ help
+ Select HP6XX if configuring for a HP jornada HP6xx.
+ More information (hardware only) at
+ <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+ bool "Dreamcast"
+ select SYS_SUPPORTS_PCI
+ depends on CPU_SUBTYPE_SH7091
+ help
+ Select Dreamcast if configuring for a SEGA Dreamcast.
+ More information at <http://www.linux-sh.org>
+
+config SH_SH03
+ bool "Interface CTP/PCI-SH03"
+ depends on CPU_SUBTYPE_SH7751
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ CTP/PCI-SH03 is a CPU module computer that is produced
+ by Interface Corporation.
+ More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+ bool "SecureEdge5410"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select SecureEdge5410 if configuring for a SnapGear SH board.
+ This includes both the OEM SecureEdge products as well as the
+ SME product line.
+
+config SH_RTS7751R2D
+ bool "RTS7751R2D"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+ help
+ Select RTS7751R2D if configuring for a Renesas Technology
+ Sales SH-Graphics board.
+
+config SH_RSK7203
+ bool "RSK7203"
+ depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+ bool "SDK7780R3"
+ depends on CPU_SUBTYPE_SH7780
+ select SYS_SUPPORTS_PCI
+ help
+ Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+ evaluation board.
+
+config SH_HIGHLANDER
+ bool "Highlander"
+ depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+
+config SH_SH7785LCR
+ bool "SH7785LCR"
+ depends on CPU_SUBTYPE_SH7785
+ select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+ bool "SH7785LCR 29bit physmaps"
+ depends on SH_SH7785LCR
+ default y
+ help
+ This board has 2 physical memory maps. It can be changed with
+ DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+ you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+ bool "Migo-R"
+ depends on CPU_SUBTYPE_SH7722
+ help
+ Select Migo-R if configuring for the SH7722 Migo-R platform
+ by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+ bool "AP-325RXA"
+ depends on CPU_SUBTYPE_SH7723
+ help
+ Renesas "AP-325RXA" support.
+ Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+ bool "SH7763RDP"
+ depends on CPU_SUBTYPE_SH7763
+ help
+ Select SH7763RDP if configuring for a Renesas SH7763
+ evaluation board.
+
+config SH_EDOSK7705
+ bool "EDOSK7705"
+ depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+ bool "SH4-202 MicroDev"
+ depends on CPU_SUBTYPE_SH4_202
+ help
+ Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+ with an SH4-202 CPU.
+
+config SH_LANDISK
+ bool "LANDISK"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+ bool "TITAN"
+ depends on CPU_SUBTYPE_SH7751R
+ select CPU_HAS_IPR_IRQ
+ select SYS_SUPPORTS_PCI
+ help
+ Select Titan if you are configuring for a Nimble Microsystems
+ NetEngine NP51R.
+
+config SH_SHMIN
+ bool "SHMIN"
+ depends on CPU_SUBTYPE_SH7706
+ select CPU_HAS_IPR_IRQ
+ help
+ Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+ bool "L-BOX RE2"
+ depends on CPU_SUBTYPE_SH7751R
+ select SYS_SUPPORTS_PCI
+ help
+ Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+ bool "SH-X3 Prototype board"
+ depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+ bool "Magic Panel R2"
+ depends on CPU_SUBTYPE_SH7720
+ help
+ Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+ bool "Hitachi Cayman"
+ depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+ select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+ int SH_MAGIC_PANEL_R2_VERSION
+ default "3"
+ help
+ Set the version of the Magic Panel R2
+
+endmenu
+
+endif
--- /dev/null
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN) += board-shmin..o
},
};
+#ifdef CONFIG_I2C
static unsigned char camera_ncm03j_magic[] =
{
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
.platform_data = &camera_info,
},
};
+#endif /* CONFIG_I2C */
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
+#ifdef CONFIG_I2C
&camera_device,
+#endif
};
static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
#include <linux/init.h>
#include <linux/types.h>
#include <linux/platform_device.h>
+#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/map.h>
+#include <linux/smc911x.h>
#include <asm/machvec.h>
#include <asm/io.h>
+static struct smc911x_platdata smc911x_info = {
+ .flags = SMC911X_USE_16BIT,
+ .irq_flags = IRQF_TRIGGER_LOW,
+};
+
static struct resource smc911x_resources[] = {
[0] = {
.start = 0x24000000,
.id = -1,
.num_resources = ARRAY_SIZE(smc911x_resources),
.resource = smc911x_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
};
static const char *probes[] = { "cmdlinepart", NULL };
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/signal.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include <asm/page.h>
/* Setup for the SMSC FDC37C935 / LAN91C100FD */
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
/*
* Platform Dependent Interrupt Priorities.
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
/* Dreamcast System ASIC Hardware Events -
#include <asm/irq.h>
#include <asm/rtc.h>
#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach/sysasic.h>
extern struct hw_interrupt_type systemasic_int;
extern void aica_time_init(void);
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
+#include <asm/r7780rp.h>
#include <asm/push-switch.h>
static irqreturn_t psw_irq_handler(int irq, void *arg)
#include <asm/io.h>
#include <asm/hd64461.h>
#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#include <asm/pm.h>
#define STBCR 0xffffff82
*/
#include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#define k0 r0
#define k1 r1
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#define SCPCR 0xa4000116
#define SCPDR 0xa4000136
#include <linux/fs.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
#define DEVCOUNT 4
#define GIO_MINOR 2 /* GIO minor no. */
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
static void disable_landisk_irq(unsigned int irq)
{
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
#include <asm/push-switch.h>
static irqreturn_t psw_irq_handler(int irq, void *arg)
#include <linux/pm.h>
#include <linux/mm.h>
#include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
+#include <mach-landisk/mach/iodata_landisk.h>
#include <asm/io.h>
void init_landisk_IRQ(void);
ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
}
+#ifdef CONFIG_I2C
static unsigned char camera_ov772x_magic[] =
{
0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
.platform_data = &ov772x_info,
},
};
+#endif /* CONFIG_I2C */
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
&sh_keysc_device,
&migor_lcdc_device,
&migor_ceu_device,
+#ifdef CONFIG_I2C
&migor_camera_device,
+#endif
&migor_nor_flash_device,
&migor_nand_flash_device,
};
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
static inline void delay(void)
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
#define INTSTS0 0x31800000
#define INTSTS1 0x31800002
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
-#include <asm/se7206.h>
+#include <mach-se/mach/se7206.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/heartbeat.h>
*/
#include <linux/kernel.h>
#include <asm/io.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7343.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
static void disable_se7343_irq(unsigned int irq)
{
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <asm/machvec.h>
-#include <asm/mach/se7343.h>
+#include <mach-se/mach/se7343.h>
#include <asm/heartbeat.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
/* MS7750 requires special versions of in*, out* routines, since
PC-like io ports are located at upper half byte of 16-bit word which
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
static struct ipr_data ipr_irq_table[] = {
/*
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
#include <asm/io.h>
#include <asm/smc37c93x.h>
#include <asm/heartbeat.h>
.resource = heartbeat_resources,
};
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7712)
/* SH771X Ethernet driver */
static struct resource sh_eth0_resources[] = {
[0] = {
.num_resources = ARRAY_SIZE(sh_eth1_resources),
.resource = sh_eth1_resources,
};
+#endif
static struct platform_device *se_devices[] __initdata = {
&heartbeat_device,
&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7712)
&sh_eth0_device,
&sh_eth1_device,
+#endif
};
static int __init se_devices_setup(void)
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
enum {
UNUSED = 0,
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
static void disable_se7722_irq(unsigned int irq)
{
#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/clock.h>
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <asm/io.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
#include <asm/addrspace.h>
static inline volatile u16 *port2adr(unsigned int port)
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/irq.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
static struct ipr_data ipr_irq_table[] = {
{ 13, 3, 3, 2 },
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7751.h>
+#include <mach-se/mach/se7751.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
/*
* Initialize IRQ setting
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
--- /dev/null
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
#include <asm/addrspace.h>
static void __init init_sh03_IRQ(void)
#include <asm/snapgear.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
/*
* EraseConfig handling functions
+++ /dev/null
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
- int SH_MAGIC_PANEL_R2_VERSION
- default "3"
- help
- Set the version of the Magic Panel R2
-
-endmenu
-
-endif
+++ /dev/null
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y := setup.o
\ No newline at end of file
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o
+++ /dev/null
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y := setup.o
CONFIG_MEMORY_START ?= 0x0c000000
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
+CONFIG_ENTRY_OFFSET ?= 0x00001000
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_ZERO_PAGE_OFFSET
+ CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
targets := zImage vmlinux.srec uImage uImage.srec
subdir- := compressed
* Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
*/
#include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
/*
* Fixed TLB entries to identity map the beginning of RAM
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed Jun 4 17:30:00 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:18:59 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:34:24 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH4=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
CONFIG_CPU_SUBTYPE_SH7091=y
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
+# CONFIG_FUSION is not set
#
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
#
-# CONFIG_FUSION is not set
#
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_MAPLE is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
#
-# SPI support
+# Sonics Silicon Backplane
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_SH_KGDB is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0d000000
CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
#
CONFIG_ISA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
#
# Power management options (EXPERIMENTAL)
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_QDI is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_SH_KGDB is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec 7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
#
# Additional SuperH Device Drivers
#
+CONFIG_HEARTBEAT=y
# CONFIG_PUSH_SWITCH is not set
#
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
#
# Bus options
#
-CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
#
# Networking
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_AEC62XX=y
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=y
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
-# PCMCIA network device support
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
#
-# Video Capture Adapters
+# Multimedia core support
#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
#
-# Video Capture Adapters
+# Multimedia drivers
#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# Open Sound System
+# USB Input Devices
#
-CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
#
-# USB support
+# USB HID Boot Protocol drivers
#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
-# Cryptographic options
+# Compression
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
#
# Timer and clock configuration
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
#
# Bus options
#
-CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
#
# Networking
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
CONFIG_8139TOO_TUNE_TWISTER=y
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Console display driver support
+# Display device support
#
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
+# Console display driver support
#
+CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
#
-# DMA Devices
+# SPI RTC drivers
#
#
-# Auxiliary Display support
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Virtualization
+# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
-# Cryptographic options
+# Compression
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH3=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0C000000
CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_SH_DSP=y
CONFIG_SH_ADC=y
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
CONFIG_CPU_HAS_DSP=y
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
# Bus options
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_START=0x0000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_PLATRAM is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
CONFIG_SH_KGDB=y
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
#
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# DMA support
#
+CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_NR_ONCHIP_DMA_CHANNELS=4
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
# Bus options
#
CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
#
# Networking
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=1
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
#
-# Hardware crypto devices
+# Compression
#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:44:41 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
#
# CONFIG_SH_7722_SOLUTION_ENGINE is not set
CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
#
# Timer and clock configuration
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
CONFIG_SUPERH_BUILT_IN_M66592=y
CONFIG_USB_G_SERIAL=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar 6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
#
# System type
CONFIG_CPU_SH4A=y
CONFIG_CPU_SHX2=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7785=y
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_HUGETLB_PAGE_SIZE_64K is not set
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
CONFIG_HUGETLB_PAGE_SIZE_1MB=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# Board support
#
CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
# CONFIG_SH_R7780RP is not set
# CONFIG_SH_R7780MP is not set
CONFIG_SH_R7785RP=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun 3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
#
# Board support
#
+CONFIG_SH_RSK7203=y
#
# Timer and clock configuration
#
# Executable file formats
#
+CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# Multimedia drivers
#
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb 7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb 7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
# CONFIG_GUSA_RB is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
# CONFIG_SH_7780_SOLUTION_ENGINE is not set
CONFIG_SH_SDK7780=y
# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
CONFIG_SH_SDK7780_BASE=y
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
CONFIG_GUSA=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
CONFIG_NET_SCH_FIFO=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_LOGO_SUPERH_MONO=y
CONFIG_LOGO_SUPERH_VGA16=y
CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun 3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
#
# Executable file formats
#
+CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_93CX6=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul 7 13:12:45 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_TINY_SHMEM=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_DAB is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# SUPERH devices
-#
-
-#
-# System on Chip audio support
-#
+CONFIG_SND_SUPERH=y
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
#
# System type
#
CONFIG_CPU_SH2=y
CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
#
# Processor features
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
#
# Board support
#
# DMA support
#
-# CONFIG_SH_DMA is not set
#
# Companion Chips
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
#
# Boot options
#
# Bus options
#
+# CONFIG_CF_ENABLER is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
#
# Executable file formats
#
+CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
# CONFIG_BINFMT_SHARED_FLAT is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
#
# Miscellaneous filesystems
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# Security options
#
# CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
#include <linux/module.h>
#include <linux/interrupt.h>
#include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
#include <asm/dma.h>
struct g2_channel {
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
#include <asm/dma.h>
#include <asm/io.h>
#include "dma-sh.h"
#ifndef __DMA_SH_H
#define __DMA_SH_H
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
/* Definitions for the SuperH DMAC */
#define REQ_L 0x00000000
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
static void __init gapspci_fixup_resources(struct pci_dev *dev)
{
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include "pci-sh5.h"
static inline u8 bridge_swizzle(u8 pin, u8 slot)
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
static struct resource gapspci_io_resource = {
.name = "GAPSPCI IO",
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
#include <asm/io.h>
#include "pci-sh4.h"
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include <asm/pci.h>
#include <asm/io.h>
#include "pci-sh5.h"
* Copyright (C) 2004 Andriy Skulysh
*/
-#include <asm/cpu/adc.h>
+#include <cpu/adc.h>
int adc_single(unsigned int channel);
#ifdef __KERNEL__
-#include <asm/cpu/addrspace.h>
+#include <cpu/addrspace.h>
/* If this CPU supports segmentation, hook up the helpers */
#ifdef P1SEG
*/
#define AT_FPUCW 18 /* Used FPU control word. */
-#ifdef CONFIG_VSYSCALL
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
/*
* Only define this in the vsyscall case, the entry point to
* the vsyscall page gets placed here. The kernel will attempt
#ifdef __KERNEL__
#include <linux/init.h>
-#include <asm/cpu/cache.h>
+#include <cpu/cache.h>
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define __flush_purge_region(start, size) do { (void)(start); } while (0)
#define __flush_invalidate_region(start, size) do { (void)(start); } while (0)
#else
-#include <asm/cpu/cacheflush.h>
+#include <cpu/cacheflush.h>
/*
* Consistent DMA requires that the __flush_xxx() primitives must be set
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/sysdev.h>
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
/* The maximum address that we can perform a DMA transfer to on this platform */
/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
#define __ASM_SH_FREQ_H
#ifdef __KERNEL__
-#include <asm/cpu/freq.h>
+#include <cpu/freq.h>
#endif /* __KERNEL__ */
#endif /* __ASM_SH_FREQ_H */
#define __ASM_SH_GPIO_H
#if defined(CONFIG_CPU_SH3)
-#include <asm/cpu/gpio.h>
+#include <cpu/gpio.h>
#endif
#endif /* __ASM_SH_GPIO_H */
#endif
#ifdef CONFIG_CPU_SH5
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#endif
#endif /* __ASM_SH_IRQ_H */
#ifndef __ASM_SH_IRQFLAGS_64_H
#define __ASM_SH_IRQFLAGS_64_H
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
#define SR_MASK_LL 0x00000000000000f0LL
#define SR_BL_LL 0x0000000010000000LL
#define __ASM_SH_MMU_CONTEXT_H
#ifdef __KERNEL__
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/tlbflush.h>
#include <asm/uaccess.h>
#include <asm/io.h>
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
#include <asm/cacheflush.h>
#define SR_ASID_MASK 0xffffffffff00ffffULL
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
-#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n1:":"=z" (pc)); pc; })
+#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
/* Core Processor Version Register */
#define CCN_PVR 0xff000030
#include <asm/types.h>
#include <asm/cache.h>
#include <asm/ptrace.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
/*
* Default implementation of macro that returns current
unsigned long capabilities;
};
-#include <asm/cpu/rtc.h>
+#include <cpu/rtc.h>
#endif /* _ASM_RTC_H */
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
#ifdef CONFIG_HD64465
-#include <asm/hd64465.h>
+#include <asm/hd64465/hd64465.h>
#define SERIAL_PORT_DFNS \
/* UART CLK PORT IRQ FLAGS */ \
#include <linux/sysdev.h>
#include <linux/clocksource.h>
-#include <asm/cpu/timer.h>
+#include <cpu/timer.h>
struct sys_timer_ops {
int (*init)(void);
({ \
long __pu_err; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = x; \
__chk_user_ptr(ptr); \
- __put_user_size((x), __pu_addr, (size), __pu_err); \
+ __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \
__pu_err; \
})
({ \
long __pu_err = -EFAULT; \
__typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = x; \
if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \
- __put_user_size((x), __pu_addr, (size), \
+ __put_user_size(__pu_val, __pu_addr, (size), \
__pu_err); \
__pu_err; \
})
__put_user_asm(x, ptr, retval, "w"); \
break; \
case 4: \
- __put_user_asm((u32)x, ptr, \
- retval, "l"); \
+ __put_user_asm(x, ptr, retval, "l"); \
break; \
case 8: \
__put_user_u64(x, ptr, retval); \
#define __ASM_SH_UBC_H
#ifdef __KERNEL__
-#include <asm/cpu/ubc.h>
+#include <cpu/ubc.h>
/* User Break Controller */
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
#ifdef __KERNEL__
#include <linux/types.h>
-#include <asm/cpu/watchdog.h>
+#include <cpu/watchdog.h>
#include <asm/io.h>
/*
- * See asm/cpu-sh2/watchdog.h for explanation of this stupidity..
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
*/
#ifndef WTCNT_R
# define WTCNT_R WTCNT
#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
#define __ASM_CPU_SH2_CACHEFLUSH_H
-/*
+/*
* Cache flushing:
*
* - flush_cache_all() flushes entire cache
#define flush_cache_sigtramp(vaddr) do { } while (0)
#define p3_cache_init() do { } while (0)
-#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
--- /dev/null
+#include <cpu-sh2/cpu/dma.h>
--- /dev/null
+#include <cpu-sh2/cpu/ubc.h>
--- /dev/null
+#include <cpu-sh2/cpu/watchdog.h>
--- /dev/null
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+#define PG_mapped PG_arch_1
+
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
#define CHCR_TS_MASK 0x18
#define CHCR_TS_SHIFT 3
-#include <asm/cpu/dma-sh7780.h>
+#include <cpu/dma-sh7780.h>
#else
#define SH_DMAC_BASE 0xffa00000
#ifndef __ASM_SH_DREAMCAST_PCI_H
#define __ASM_SH_DREAMCAST_PCI_H
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
#define GAPSPCI_REGS 0x01001400
#define GAPSPCI_DMA_BASE 0x01840000
--- /dev/null
+vmlinux.lds
}
#if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
#endif
/*
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
#include <asm/page.h>
/*
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/page.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
#include <asm/page.h>
! NOTE:
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/fpu.h>
* and Kamel Khelifi <kamel.khelifi@st.com>
*/
#include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
#define LIT64( a ) a##LL
#include <linux/io.h>
#include <asm/page.h>
#include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
struct sq_mapping;
*/
#include <linux/errno.h>
#include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
#include <asm/processor.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
#include <asm/thread_info.h>
/*
#include <asm/machvec.h>
#include <asm/uaccess.h>
#include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
atomic_t irq_err_count;
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/platform_device.h>
-#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h> /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
#include <asm/addrspace.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
/* THIS IS A PHYSICAL ADDRESS */
#define HDSP2534_ADDR (0x04002100)
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
/* Callable from fault.c, so not static */
inline void __do_tlb_refill(unsigned long address,
# Shamelessly cloned from ARM.
#
-include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
+arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types
@echo ' Generating $@'
- $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
+ $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi
$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
pci_swiotlb_init();
}
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+ unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+ return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
#endif
/*
initmem_init(0, max_pfn);
-#ifdef CONFIG_X86_64
- dma32_reserve_bootmem();
-#endif
-
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
#endif
reserve_crashkernel();
+#ifdef CONFIG_X86_64
+ /*
+ * dma32_reserve_bootmem() allocates bootmem which may conflict
+ * with the crashkernel command line, so do that after
+ * reserve_crashkernel()
+ */
+ dma32_reserve_bootmem();
+#endif
+
reserve_ibft_region();
#ifdef CONFIG_KVM_CLOCK
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_VIRTIO) += virtio/
+obj-$(CONFIG_REGULATOR) += regulator/
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/delay.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
#define GDROM_DEV_NAME "gdrom"
#define GD_SESSION_OFFSET 150
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/maple.h>
-#include <asm/mach/maple.h>
/* Very simple mutex to ensure proper cleanup */
static DEFINE_MUTEX(maple_keyb_mutex);
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
struct mmc_blk_request brq;
- int ret = 1, sg_pos, data_size;
+ int ret = 1, data_size, i;
+ struct scatterlist *sg;
mmc_claim_host(card->host);
mmc_queue_bounce_pre(mq);
+ /*
+ * Adjust the sg list so it is the same size as the
+ * request.
+ */
if (brq.data.blocks !=
(req->nr_sectors >> (md->block_bits - 9))) {
data_size = brq.data.blocks * brq.data.blksz;
- for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) {
- data_size -= mq->sg[sg_pos].length;
+ for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
+ data_size -= sg->length;
if (data_size <= 0) {
- mq->sg[sg_pos].length += data_size;
- sg_pos++;
+ sg->length += data_size;
+ i++;
break;
}
}
- brq.data.sg_len = sg_pos;
+ brq.data.sg_len = i;
}
mmc_wait_for_req(card->host, &brq.mrq);
int ret, i;
unsigned long flags;
- BUG_ON(blocks * blksz > BUFFER_SIZE);
-
if (write) {
for (i = 0;i < blocks * blksz;i++)
test->scratch[i] = i;
} else {
- memset(test->scratch, 0, blocks * blksz);
+ memset(test->scratch, 0, BUFFER_SIZE);
}
local_irq_save(flags);
- sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz);
+ sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
local_irq_restore(flags);
ret = mmc_test_set_blksize(test, blksz);
}
} else {
local_irq_save(flags);
- sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz);
+ sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE);
local_irq_restore(flags);
for (i = 0;i < blocks * blksz;i++) {
if (test->scratch[i] != (u8)i)
return 0;
}
-static int mmc_test_bigsg_write(struct mmc_test_card *test)
-{
- int ret;
- unsigned int size;
- struct scatterlist sg;
-
- if (test->card->host->max_blk_count == 1)
- return RESULT_UNSUP_HOST;
-
- size = PAGE_SIZE * 2;
- size = min(size, test->card->host->max_req_size);
- size = min(size, test->card->host->max_seg_size);
- size = min(size, test->card->host->max_blk_count * 512);
-
- memset(test->buffer, 0, BUFFER_SIZE);
-
- if (size < 1024)
- return RESULT_UNSUP_HOST;
-
- sg_init_table(&sg, 1);
- sg_init_one(&sg, test->buffer, BUFFER_SIZE);
-
- ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int mmc_test_bigsg_read(struct mmc_test_card *test)
-{
- int ret, i;
- unsigned int size;
- struct scatterlist sg;
-
- if (test->card->host->max_blk_count == 1)
- return RESULT_UNSUP_HOST;
-
- size = PAGE_SIZE * 2;
- size = min(size, test->card->host->max_req_size);
- size = min(size, test->card->host->max_seg_size);
- size = min(size, test->card->host->max_blk_count * 512);
-
- if (size < 1024)
- return RESULT_UNSUP_HOST;
-
- memset(test->buffer, 0xCD, BUFFER_SIZE);
-
- sg_init_table(&sg, 1);
- sg_init_one(&sg, test->buffer, BUFFER_SIZE);
- ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
- if (ret)
- return ret;
-
- /* mmc_test_transfer() doesn't check for read overflows */
- for (i = size;i < BUFFER_SIZE;i++) {
- if (test->buffer[i] != 0xCD)
- return RESULT_FAIL;
- }
-
- return 0;
-}
-
#ifdef CONFIG_HIGHMEM
static int mmc_test_write_high(struct mmc_test_card *test)
.run = mmc_test_multi_xfersize_read,
},
- {
- .name = "Over-sized SG list write",
- .prepare = mmc_test_prepare_write,
- .run = mmc_test_bigsg_write,
- .cleanup = mmc_test_cleanup,
- },
-
- {
- .name = "Over-sized SG list read",
- .prepare = mmc_test_prepare_read,
- .run = mmc_test_bigsg_read,
- .cleanup = mmc_test_cleanup,
- },
-
#ifdef CONFIG_HIGHMEM
{
{
#ifdef CONFIG_MMC_DEBUG
unsigned int i, sz;
+ struct scatterlist *sg;
#endif
pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
#ifdef CONFIG_MMC_DEBUG
sz = 0;
- for (i = 0;i < mrq->data->sg_len;i++)
- sz += mrq->data->sg[i].length;
+ for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i)
+ sz += sg->length;
BUG_ON(sz != mrq->data->blocks * mrq->data->blksz);
#endif
/* Hardware definitions */
#define AU1XMMC_DESCRIPTOR_COUNT 1
-#define AU1XMMC_DESCRIPTOR_SIZE 2048
+
+/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
+#ifdef CONFIG_SOC_AU1100
+#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
+#else /* Au1200 */
+#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
+#endif
#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR |
SDHCI_QUIRK_32BIT_DMA_SIZE |
SDHCI_QUIRK_32BIT_ADMA_SIZE |
- SDHCI_QUIRK_RESET_AFTER_REQUEST;
+ SDHCI_QUIRK_RESET_AFTER_REQUEST |
+ SDHCI_QUIRK_BROKEN_SMALL_PIO;
}
/*
else
mask = SDHCI_SPACE_AVAILABLE;
+ /*
+ * Some controllers (JMicron JMB38x) mess up the buffer bits
+ * for transfers < 4 bytes. As long as it is just one block,
+ * we can ignore the bits.
+ */
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
+ (host->data->blocks == 1))
+ mask = ~0;
+
while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
if (host->data->flags & MMC_DATA_READ)
sdhci_read_block_pio(host);
host->adma_addr = dma_map_single(mmc_dev(host->mmc),
host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
- if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
+ if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
goto unmap_entries;
BUG_ON(host->adma_addr & 0x3);
* us an invalid request.
*/
WARN_ON(1);
- host->flags &= ~SDHCI_USE_DMA;
+ host->flags &= ~SDHCI_REQ_USE_DMA;
} else {
writel(host->adma_addr,
host->ioaddr + SDHCI_ADMA_ADDRESS);
* us an invalid request.
*/
WARN_ON(1);
- host->flags &= ~SDHCI_USE_DMA;
+ host->flags &= ~SDHCI_REQ_USE_DMA;
} else {
WARN_ON(sg_cnt != 1);
writel(sg_dma_address(data->sg),
#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11)
/* Controller provides an incorrect timeout value for transfers */
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
+/* Controller has an issue with buffer bits for small transfers */
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
help
Say Y to enable support for the battery on the OLPC laptop.
+config BATTERY_TOSA
+ tristate "Sharp SL-6000 (tosa) battery"
+ depends on MACH_TOSA && MFD_TC6393XB
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-6000 (tosa) models.
+
config BATTERY_PALMTX
tristate "Palm T|X battery"
depends on MACH_PALMTX
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
#define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
#define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
-#define EC_BAT_ACR 0x12
+#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */
#define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */
#define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */
#define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */
.get_property = olpc_ac_get_prop,
};
+static char bat_serial[17]; /* Ick */
+
+static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
+{
+ if (olpc_platform_info.ecver > 0x44) {
+ if (ec_byte & BAT_STAT_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ec_byte & BAT_STAT_DISCHARGING)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* er,... */
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ /* Older EC didn't report charge/discharge bits */
+ if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* Not _necessarily_ true but EC doesn't tell all yet */
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte) {
+ case 0:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+
+ case BAT_ERR_OVERTEMP:
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+
+ case BAT_ERR_OVERVOLTAGE:
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+
+ case BAT_ERR_INFOFAIL:
+ case BAT_ERR_OUT_OF_CONTROL:
+ case BAT_ERR_ID_FAIL:
+ case BAT_ERR_ACR_FAIL:
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+
+ default:
+ /* Eep. We don't know this failure code */
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte >> 4) {
+ case 1:
+ val->strval = "Gold Peak";
+ break;
+ case 2:
+ val->strval = "BYD";
+ break;
+ default:
+ val->strval = "Unknown";
+ break;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte & 0xf) {
+ case 1:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+ break;
+ case 2:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ break;
+ }
+
+ return ret;
+}
+
/*********************************************************************
* Battery properties
*********************************************************************/
int ret = 0;
int16_t ec_word;
uint8_t ec_byte;
+ uint64_t ser_buf;
ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
if (ret)
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
- if (olpc_platform_info.ecver > 0x44) {
- if (ec_byte & BAT_STAT_CHARGING)
- val->intval = POWER_SUPPLY_STATUS_CHARGING;
- else if (ec_byte & BAT_STAT_DISCHARGING)
- val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (ec_byte & BAT_STAT_FULL)
- val->intval = POWER_SUPPLY_STATUS_FULL;
- else /* er,... */
- val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
- } else {
- /* Older EC didn't report charge/discharge bits */
- if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
- val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (ec_byte & BAT_STAT_FULL)
- val->intval = POWER_SUPPLY_STATUS_FULL;
- else /* Not _necessarily_ true but EC doesn't tell all yet */
- val->intval = POWER_SUPPLY_STATUS_CHARGING;
- break;
- }
+ ret = olpc_bat_get_status(val, ec_byte);
+ if (ret)
+ return ret;
+ break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(ec_byte & BAT_STAT_PRESENT);
break;
if (ec_byte & BAT_STAT_DESTROY)
val->intval = POWER_SUPPLY_HEALTH_DEAD;
else {
- ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ ret = olpc_bat_get_health(val);
if (ret)
return ret;
-
- switch (ec_byte) {
- case 0:
- val->intval = POWER_SUPPLY_HEALTH_GOOD;
- break;
-
- case BAT_ERR_OVERTEMP:
- val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
- break;
-
- case BAT_ERR_OVERVOLTAGE:
- val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
- break;
-
- case BAT_ERR_INFOFAIL:
- case BAT_ERR_OUT_OF_CONTROL:
- case BAT_ERR_ID_FAIL:
- case BAT_ERR_ACR_FAIL:
- val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
- break;
-
- default:
- /* Eep. We don't know this failure code */
- return -EIO;
- }
}
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
- ec_byte = BAT_ADDR_MFR_TYPE;
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ ret = olpc_bat_get_mfr(val);
if (ret)
return ret;
-
- switch (ec_byte >> 4) {
- case 1:
- val->strval = "Gold Peak";
- break;
- case 2:
- val->strval = "BYD";
- break;
- default:
- val->strval = "Unknown";
- break;
- }
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
- ec_byte = BAT_ADDR_MFR_TYPE;
- ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ ret = olpc_bat_get_tech(val);
if (ret)
return ret;
-
- switch (ec_byte & 0xf) {
- case 1:
- val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
- break;
- case 2:
- val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
- break;
- default:
- val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
- break;
- }
break;
case POWER_SUPPLY_PROP_VOLTAGE_AVG:
ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
ec_word = be16_to_cpu(ec_word);
val->intval = ec_word * 100 / 256;
break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ ec_word = be16_to_cpu(ec_word);
+ val->intval = ec_word * 6250 / 15;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+ if (ret)
+ return ret;
+
+ sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+ val->strval = bat_serial;
+ break;
default:
ret = -EINVAL;
break;
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START 0x20
+#define EEPROM_END 0x80
+#define EEPROM_SIZE (EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+ uint8_t ec_byte;
+ int ret, end;
+
+ if (off >= EEPROM_SIZE)
+ return 0;
+ if (off + count > EEPROM_SIZE)
+ count = EEPROM_SIZE - off;
+
+ end = EEPROM_START + off + count;
+ for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
+ &buf[ec_byte - EEPROM_START], 1);
+ if (ret) {
+ printk(KERN_ERR "olpc-battery: EC command "
+ "EC_BAT_EEPROM @ 0x%x failed -"
+ " %d!\n", ec_byte, ret);
+ return -EIO;
+ }
+ }
+
+ return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO,
+ .owner = THIS_MODULE,
+ },
+ .size = 0,
+ .read = olpc_bat_eeprom_read,
};
/*********************************************************************
if (!olpc_platform_info.ecver)
return -ENXIO;
- if (olpc_platform_info.ecver < 0x43) {
- printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+
+ /*
+ * We've seen a number of EC protocol changes; this driver requires
+ * the latest EC protocol, supported by 0x44 and above.
+ */
+ if (olpc_platform_info.ecver < 0x44) {
+ printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+ "battery driver.\n", olpc_platform_info.ecver);
return -ENXIO;
}
if (ret)
goto battery_failed;
+ ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
+ if (ret)
+ goto eeprom_failed;
+
goto success;
+eeprom_failed:
+ power_supply_unregister(&olpc_bat);
battery_failed:
power_supply_unregister(&olpc_ac);
ac_failed:
static void __exit olpc_bat_exit(void)
{
+ device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
platform_device_unregister(bat_pdev);
POWER_SUPPLY_ATTR(charge_empty),
POWER_SUPPLY_ATTR(charge_now),
POWER_SUPPLY_ATTR(charge_avg),
+ POWER_SUPPLY_ATTR(charge_counter),
POWER_SUPPLY_ATTR(energy_full_design),
POWER_SUPPLY_ATTR(energy_empty_design),
POWER_SUPPLY_ATTR(energy_full),
--- /dev/null
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+ int status;
+ struct power_supply psy;
+ int full_chrg;
+
+ struct mutex work_lock; /* protects data */
+
+ bool (*is_present)(struct tosa_bat *bat);
+ int gpio_full;
+ int gpio_charge_off;
+
+ int technology;
+
+ int gpio_bat;
+ int adc_bat;
+ int adc_bat_divider;
+ int bat_max;
+ int bat_min;
+
+ int gpio_temp;
+ int adc_temp;
+ int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_bat, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ bat->adc_bat);
+ gpio_set_value(bat->gpio_bat, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 1000000 / bat->adc_bat_divider;
+
+ return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_temp, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data,
+ bat->adc_temp);
+ gpio_set_value(bat->gpio_temp, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 10000 / bat->adc_temp_divider;
+
+ return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy);
+
+ if (bat->is_present && !bat->is_present(bat)
+ && psp != POWER_SUPPLY_PROP_PRESENT) {
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat->status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = tosa_read_bat(bat);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (bat->full_chrg == -1)
+ val->intval = bat->bat_max;
+ else
+ val->intval = bat->full_chrg;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->bat_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat->bat_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = tosa_read_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bat->is_present ? bat->is_present(bat) : 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+ return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+ schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+ pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+ int old;
+ struct power_supply *psy = &bat->psy;
+
+ mutex_lock(&bat->work_lock);
+
+ old = bat->status;
+
+ if (bat->is_present && !bat->is_present(bat)) {
+ printk(KERN_NOTICE "%s not present\n", psy->name);
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->full_chrg = -1;
+ } else if (power_supply_am_i_supplied(psy)) {
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ mdelay(15);
+ }
+
+ if (gpio_get_value(bat->gpio_full)) {
+ if (old == POWER_SUPPLY_STATUS_CHARGING ||
+ bat->full_chrg == -1)
+ bat->full_chrg = tosa_read_bat(bat);
+
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (old != bat->status)
+ power_supply_changed(psy);
+
+ mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+ tosa_bat_update(&tosa_bat_main);
+ tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct tosa_bat tosa_bat_main = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ .use_for_apm = 1,
+ },
+
+ .gpio_full = TOSA_GPIO_BAT0_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT0_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "jacket-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ },
+
+ .is_present = tosa_jacket_bat_is_present,
+ .gpio_full = TOSA_GPIO_BAT1_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT1_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+ .status = POWER_SUPPLY_STATUS_UNKNOWN,
+ .full_chrg = -1,
+
+ .psy = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_bu_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_bu_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ },
+
+ .gpio_full = -1,
+ .gpio_charge_off = -1,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+ .gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+ .adc_bat = WM97XX_AUX_ID4,
+ .adc_bat_divider = 1266,
+
+ .gpio_temp = -1,
+ .adc_temp = -1,
+ .adc_temp_divider = -1,
+};
+
+static struct {
+ int gpio;
+ char *name;
+ bool output;
+ int value;
+} gpios[] = {
+ { TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 },
+ { TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 },
+ { TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 },
+ { TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 },
+ { TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 },
+ { TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 },
+ { TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 },
+ { TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 },
+ { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 },
+ { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 },
+ { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 },
+ { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 },
+ { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+ /* flush all pending status updates */
+ flush_scheduled_work();
+ return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+ /* things may have changed while we were away */
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int __devinit tosa_bat_probe(struct platform_device *dev)
+{
+ int ret;
+ int i;
+
+ if (!machine_is_tosa())
+ return -ENODEV;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ ret = gpio_request(gpios[i].gpio, gpios[i].name);
+ if (ret) {
+ i--;
+ goto err_gpio;
+ }
+
+ if (gpios[i].output)
+ ret = gpio_direction_output(gpios[i].gpio,
+ gpios[i].value);
+ else
+ ret = gpio_direction_input(gpios[i].gpio);
+
+ if (ret)
+ goto err_gpio;
+ }
+
+ mutex_init(&tosa_bat_main.work_lock);
+ mutex_init(&tosa_bat_jacket.work_lock);
+
+ INIT_WORK(&bat_work, tosa_bat_work);
+
+ ret = power_supply_register(&dev->dev, &tosa_bat_main.psy);
+ if (ret)
+ goto err_psy_reg_main;
+ ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy);
+ if (ret)
+ goto err_psy_reg_jacket;
+ ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy);
+ if (ret)
+ goto err_psy_reg_bu;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "main full", &tosa_bat_main);
+ if (ret)
+ goto err_req_main;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket full", &tosa_bat_jacket);
+ if (ret)
+ goto err_req_jacket;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket detect", &tosa_bat_jacket);
+ if (!ret) {
+ schedule_work(&bat_work);
+ return 0;
+ }
+
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+ power_supply_unregister(&tosa_bat_bu.psy);
+err_psy_reg_bu:
+ power_supply_unregister(&tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+ power_supply_unregister(&tosa_bat_main.psy);
+err_psy_reg_main:
+
+ /* see comment in tosa_bat_remove */
+ flush_scheduled_work();
+
+ i--;
+err_gpio:
+ for (; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return ret;
+}
+
+static int __devexit tosa_bat_remove(struct platform_device *dev)
+{
+ int i;
+
+ free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+ power_supply_unregister(&tosa_bat_bu.psy);
+ power_supply_unregister(&tosa_bat_jacket.psy);
+ power_supply_unregister(&tosa_bat_main.psy);
+
+ /*
+ * now flush all pending work.
+ * we won't get any more schedules, since all
+ * sources (isr and external_power_changed)
+ * are unregistered now.
+ */
+ flush_scheduled_work();
+
+ for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+ .driver.name = "wm97xx-battery",
+ .driver.owner = THIS_MODULE,
+ .probe = tosa_bat_probe,
+ .remove = __devexit_p(tosa_bat_remove),
+ .suspend = tosa_bat_suspend,
+ .resume = tosa_bat_resume,
+};
+
+static int __init tosa_bat_init(void)
+{
+ return platform_driver_register(&tosa_bat_driver);
+}
+
+static void __exit tosa_bat_exit(void)
+{
+ platform_driver_unregister(&tosa_bat_driver);
+}
+
+module_init(tosa_bat_init);
+module_exit(tosa_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
--- /dev/null
+menu "Voltage and Current regulators"
+
+config REGULATOR
+ bool "Voltage and Current Regulator Support"
+ default n
+ help
+ Generic Voltage and Current Regulator support.
+
+ This framework is designed to provide a generic interface to voltage
+ and current regulators within the Linux kernel. It's intended to
+ provide voltage and current control to client or consumer drivers and
+ also provide status information to user space applications through a
+ sysfs interface.
+
+ The intention is to allow systems to dynamically control regulator
+ output in order to save power and prolong battery life. This applies
+ to both voltage regulators (where voltage output is controllable) and
+ current sinks (where current output is controllable).
+
+ This framework safely compiles out if not selected so that client
+ drivers can still be used in systems with no software controllable
+ regulators.
+
+ If unsure, say no.
+
+config REGULATOR_DEBUG
+ bool "Regulator debug support"
+ depends on REGULATOR
+ help
+ Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+ tristate
+ default n
+ select REGULATOR
+
+config REGULATOR_VIRTUAL_CONSUMER
+ tristate "Virtual regulator consumer support"
+ default n
+ select REGULATOR
+ help
+ This driver provides a virtual consumer for the voltage and
+ current regulator API which provides sysfs controls for
+ configuring the supplies requested. This is mainly useful
+ for test purposes.
+
+ If unsure, say no.
+
+config REGULATOR_BQ24022
+ tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
+ default n
+ select REGULATOR
+ help
+ This driver controls a TI bq24022 Charger attached via
+ GPIOs. The provided current regulator can enable/disable
+ charging select between 100 mA and 500 mA charging current
+ limit.
+
+endmenu
--- /dev/null
+#
+# Makefile for regulator drivers.
+#
+
+
+obj-$(CONFIG_REGULATOR) += core.o
+obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
+obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
+
+obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
+
+ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
--- /dev/null
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/driver.h>
+
+static int bq24022_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct platform_device *pdev = rdev_get_drvdata(rdev);
+ struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+ dev_dbg(&pdev->dev, "setting current limit to %s mA\n",
+ max_uA >= 500000 ? "500" : "100");
+
+ /* REVISIT: maybe return error if min_uA != 0 ? */
+ gpio_set_value(pdata->gpio_iset2, max_uA >= 500000);
+ return 0;
+}
+
+static int bq24022_get_current_limit(struct regulator_dev *rdev)
+{
+ struct platform_device *pdev = rdev_get_drvdata(rdev);
+ struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+ return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
+}
+
+static int bq24022_enable(struct regulator_dev *rdev)
+{
+ struct platform_device *pdev = rdev_get_drvdata(rdev);
+ struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+ dev_dbg(&pdev->dev, "enabling charger\n");
+
+ gpio_set_value(pdata->gpio_nce, 0);
+ return 0;
+}
+
+static int bq24022_disable(struct regulator_dev *rdev)
+{
+ struct platform_device *pdev = rdev_get_drvdata(rdev);
+ struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+ dev_dbg(&pdev->dev, "disabling charger\n");
+
+ gpio_set_value(pdata->gpio_nce, 1);
+ return 0;
+}
+
+static int bq24022_is_enabled(struct regulator_dev *rdev)
+{
+ struct platform_device *pdev = rdev_get_drvdata(rdev);
+ struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+
+ return !gpio_get_value(pdata->gpio_nce);
+}
+
+static struct regulator_ops bq24022_ops = {
+ .set_current_limit = bq24022_set_current_limit,
+ .get_current_limit = bq24022_get_current_limit,
+ .enable = bq24022_enable,
+ .disable = bq24022_disable,
+ .is_enabled = bq24022_is_enabled,
+};
+
+static struct regulator_desc bq24022_desc = {
+ .name = "bq24022",
+ .ops = &bq24022_ops,
+ .type = REGULATOR_CURRENT,
+};
+
+static int __init bq24022_probe(struct platform_device *pdev)
+{
+ struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct regulator_dev *bq24022;
+ int ret;
+
+ if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2)
+ return -EINVAL;
+
+ ret = gpio_request(pdata->gpio_nce, "ncharge_en");
+ if (ret) {
+ dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n",
+ pdata->gpio_nce);
+ goto err_ce;
+ }
+ ret = gpio_request(pdata->gpio_iset2, "charge_mode");
+ if (ret) {
+ dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n",
+ pdata->gpio_iset2);
+ goto err_iset2;
+ }
+ ret = gpio_direction_output(pdata->gpio_iset2, 0);
+ ret = gpio_direction_output(pdata->gpio_nce, 1);
+
+ bq24022 = regulator_register(&bq24022_desc, pdev);
+ if (IS_ERR(bq24022)) {
+ dev_dbg(&pdev->dev, "couldn't register regulator\n");
+ ret = PTR_ERR(bq24022);
+ goto err_reg;
+ }
+ platform_set_drvdata(pdev, bq24022);
+ dev_dbg(&pdev->dev, "registered regulator\n");
+
+ return 0;
+err_reg:
+ gpio_free(pdata->gpio_iset2);
+err_iset2:
+ gpio_free(pdata->gpio_nce);
+err_ce:
+ return ret;
+}
+
+static int __devexit bq24022_remove(struct platform_device *pdev)
+{
+ struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct regulator_dev *bq24022 = platform_get_drvdata(pdev);
+
+ regulator_unregister(bq24022);
+ gpio_free(pdata->gpio_iset2);
+ gpio_free(pdata->gpio_nce);
+
+ return 0;
+}
+
+static struct platform_driver bq24022_driver = {
+ .driver = {
+ .name = "bq24022",
+ },
+ .remove = __devexit_p(bq24022_remove),
+};
+
+static int __init bq24022_init(void)
+{
+ return platform_driver_probe(&bq24022_driver, bq24022_probe);
+}
+
+static void __exit bq24022_exit(void)
+{
+ platform_driver_unregister(&bq24022_driver);
+}
+
+/*
+ * make sure this is probed before gpio_vbus and pda_power,
+ * but after asic3 or other GPIO expander drivers.
+ */
+subsys_initcall(bq24022_init);
+module_exit(bq24022_exit);
+
+MODULE_AUTHOR("Philipp Zabel");
+MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * core.c -- Voltage/Current Regulator framework.
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/suspend.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define REGULATOR_VERSION "0.5"
+
+static DEFINE_MUTEX(regulator_list_mutex);
+static LIST_HEAD(regulator_list);
+static LIST_HEAD(regulator_map_list);
+
+/**
+ * struct regulator_dev
+ *
+ * Voltage / Current regulator class device. One for each regulator.
+ */
+struct regulator_dev {
+ struct regulator_desc *desc;
+ int use_count;
+
+ /* lists we belong to */
+ struct list_head list; /* list of all regulators */
+ struct list_head slist; /* list of supplied regulators */
+
+ /* lists we own */
+ struct list_head consumer_list; /* consumers we supply */
+ struct list_head supply_list; /* regulators we supply */
+
+ struct blocking_notifier_head notifier;
+ struct mutex mutex; /* consumer lock */
+ struct module *owner;
+ struct device dev;
+ struct regulation_constraints *constraints;
+ struct regulator_dev *supply; /* for tree */
+
+ void *reg_data; /* regulator_dev data */
+};
+
+/**
+ * struct regulator_map
+ *
+ * Used to provide symbolic supply names to devices.
+ */
+struct regulator_map {
+ struct list_head list;
+ struct device *dev;
+ const char *supply;
+ const char *regulator;
+};
+
+static inline struct regulator_dev *to_rdev(struct device *d)
+{
+ return container_of(d, struct regulator_dev, dev);
+}
+
+/*
+ * struct regulator
+ *
+ * One for each consumer device.
+ */
+struct regulator {
+ struct device *dev;
+ struct list_head list;
+ int uA_load;
+ int min_uV;
+ int max_uV;
+ int enabled; /* client has called enabled */
+ char *supply_name;
+ struct device_attribute dev_attr;
+ struct regulator_dev *rdev;
+};
+
+static int _regulator_is_enabled(struct regulator_dev *rdev);
+static int _regulator_disable(struct regulator_dev *rdev);
+static int _regulator_get_voltage(struct regulator_dev *rdev);
+static int _regulator_get_current_limit(struct regulator_dev *rdev);
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
+static void _notifier_call_chain(struct regulator_dev *rdev,
+ unsigned long event, void *data);
+
+/* gets the regulator for a given consumer device */
+static struct regulator *get_device_regulator(struct device *dev)
+{
+ struct regulator *regulator = NULL;
+ struct regulator_dev *rdev;
+
+ mutex_lock(®ulator_list_mutex);
+ list_for_each_entry(rdev, ®ulator_list, list) {
+ mutex_lock(&rdev->mutex);
+ list_for_each_entry(regulator, &rdev->consumer_list, list) {
+ if (regulator->dev == dev) {
+ mutex_unlock(&rdev->mutex);
+ mutex_unlock(®ulator_list_mutex);
+ return regulator;
+ }
+ }
+ mutex_unlock(&rdev->mutex);
+ }
+ mutex_unlock(®ulator_list_mutex);
+ return NULL;
+}
+
+/* Platform voltage constraint check */
+static int regulator_check_voltage(struct regulator_dev *rdev,
+ int *min_uV, int *max_uV)
+{
+ BUG_ON(*min_uV > *max_uV);
+
+ if (!rdev->constraints) {
+ printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+ rdev->desc->name);
+ return -ENODEV;
+ }
+ if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ printk(KERN_ERR "%s: operation not allowed for %s\n",
+ __func__, rdev->desc->name);
+ return -EPERM;
+ }
+
+ if (*max_uV > rdev->constraints->max_uV)
+ *max_uV = rdev->constraints->max_uV;
+ if (*min_uV < rdev->constraints->min_uV)
+ *min_uV = rdev->constraints->min_uV;
+
+ if (*min_uV > *max_uV)
+ return -EINVAL;
+
+ return 0;
+}
+
+/* current constraint check */
+static int regulator_check_current_limit(struct regulator_dev *rdev,
+ int *min_uA, int *max_uA)
+{
+ BUG_ON(*min_uA > *max_uA);
+
+ if (!rdev->constraints) {
+ printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+ rdev->desc->name);
+ return -ENODEV;
+ }
+ if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
+ printk(KERN_ERR "%s: operation not allowed for %s\n",
+ __func__, rdev->desc->name);
+ return -EPERM;
+ }
+
+ if (*max_uA > rdev->constraints->max_uA)
+ *max_uA = rdev->constraints->max_uA;
+ if (*min_uA < rdev->constraints->min_uA)
+ *min_uA = rdev->constraints->min_uA;
+
+ if (*min_uA > *max_uA)
+ return -EINVAL;
+
+ return 0;
+}
+
+/* operating mode constraint check */
+static int regulator_check_mode(struct regulator_dev *rdev, int mode)
+{
+ if (!rdev->constraints) {
+ printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+ rdev->desc->name);
+ return -ENODEV;
+ }
+ if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
+ printk(KERN_ERR "%s: operation not allowed for %s\n",
+ __func__, rdev->desc->name);
+ return -EPERM;
+ }
+ if (!(rdev->constraints->valid_modes_mask & mode)) {
+ printk(KERN_ERR "%s: invalid mode %x for %s\n",
+ __func__, mode, rdev->desc->name);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* dynamic regulator mode switching constraint check */
+static int regulator_check_drms(struct regulator_dev *rdev)
+{
+ if (!rdev->constraints) {
+ printk(KERN_ERR "%s: no constraints for %s\n", __func__,
+ rdev->desc->name);
+ return -ENODEV;
+ }
+ if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
+ printk(KERN_ERR "%s: operation not allowed for %s\n",
+ __func__, rdev->desc->name);
+ return -EPERM;
+ }
+ return 0;
+}
+
+static ssize_t device_requested_uA_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator *regulator;
+
+ regulator = get_device_regulator(dev);
+ if (regulator == NULL)
+ return 0;
+
+ return sprintf(buf, "%d\n", regulator->uA_load);
+}
+
+static ssize_t regulator_uV_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+ ssize_t ret;
+
+ mutex_lock(&rdev->mutex);
+ ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
+ mutex_unlock(&rdev->mutex);
+
+ return ret;
+}
+
+static ssize_t regulator_uA_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
+}
+
+static ssize_t regulator_opmode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+ int mode = _regulator_get_mode(rdev);
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ return sprintf(buf, "fast\n");
+ case REGULATOR_MODE_NORMAL:
+ return sprintf(buf, "normal\n");
+ case REGULATOR_MODE_IDLE:
+ return sprintf(buf, "idle\n");
+ case REGULATOR_MODE_STANDBY:
+ return sprintf(buf, "standby\n");
+ }
+ return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+ int state = _regulator_is_enabled(rdev);
+
+ if (state > 0)
+ return sprintf(buf, "enabled\n");
+ else if (state == 0)
+ return sprintf(buf, "disabled\n");
+ else
+ return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_min_uA_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "constraint not defined\n");
+
+ return sprintf(buf, "%d\n", rdev->constraints->min_uA);
+}
+
+static ssize_t regulator_max_uA_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "constraint not defined\n");
+
+ return sprintf(buf, "%d\n", rdev->constraints->max_uA);
+}
+
+static ssize_t regulator_min_uV_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "constraint not defined\n");
+
+ return sprintf(buf, "%d\n", rdev->constraints->min_uV);
+}
+
+static ssize_t regulator_max_uV_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "constraint not defined\n");
+
+ return sprintf(buf, "%d\n", rdev->constraints->max_uV);
+}
+
+static ssize_t regulator_total_uA_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator *regulator;
+ int uA = 0;
+
+ mutex_lock(&rdev->mutex);
+ list_for_each_entry(regulator, &rdev->consumer_list, list)
+ uA += regulator->uA_load;
+ mutex_unlock(&rdev->mutex);
+ return sprintf(buf, "%d\n", uA);
+}
+
+static ssize_t regulator_num_users_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+ return sprintf(buf, "%d\n", rdev->use_count);
+}
+
+static ssize_t regulator_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ switch (rdev->desc->type) {
+ case REGULATOR_VOLTAGE:
+ return sprintf(buf, "voltage\n");
+ case REGULATOR_CURRENT:
+ return sprintf(buf, "current\n");
+ }
+ return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+ return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
+}
+
+static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+ return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
+}
+
+static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+ return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
+}
+
+static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
+ unsigned int mode, char *buf)
+{
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ return sprintf(buf, "fast\n");
+ case REGULATOR_MODE_NORMAL:
+ return sprintf(buf, "normal\n");
+ case REGULATOR_MODE_IDLE:
+ return sprintf(buf, "idle\n");
+ case REGULATOR_MODE_STANDBY:
+ return sprintf(buf, "standby\n");
+ }
+ return sprintf(buf, "unknown\n");
+}
+
+static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+ return suspend_opmode_show(rdev,
+ rdev->constraints->state_mem.mode, buf);
+}
+
+static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+ return suspend_opmode_show(rdev,
+ rdev->constraints->state_disk.mode, buf);
+}
+
+static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+ return suspend_opmode_show(rdev,
+ rdev->constraints->state_standby.mode, buf);
+}
+
+static ssize_t regulator_suspend_mem_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+
+ if (rdev->constraints->state_mem.enabled)
+ return sprintf(buf, "enabled\n");
+ else
+ return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_disk_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+
+ if (rdev->constraints->state_disk.enabled)
+ return sprintf(buf, "enabled\n");
+ else
+ return sprintf(buf, "disabled\n");
+}
+
+static ssize_t regulator_suspend_standby_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+
+ if (!rdev->constraints)
+ return sprintf(buf, "not defined\n");
+
+ if (rdev->constraints->state_standby.enabled)
+ return sprintf(buf, "enabled\n");
+ else
+ return sprintf(buf, "disabled\n");
+}
+static struct device_attribute regulator_dev_attrs[] = {
+ __ATTR(microvolts, 0444, regulator_uV_show, NULL),
+ __ATTR(microamps, 0444, regulator_uA_show, NULL),
+ __ATTR(opmode, 0444, regulator_opmode_show, NULL),
+ __ATTR(state, 0444, regulator_state_show, NULL),
+ __ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL),
+ __ATTR(min_microamps, 0444, regulator_min_uA_show, NULL),
+ __ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL),
+ __ATTR(max_microamps, 0444, regulator_max_uA_show, NULL),
+ __ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL),
+ __ATTR(num_users, 0444, regulator_num_users_show, NULL),
+ __ATTR(type, 0444, regulator_type_show, NULL),
+ __ATTR(suspend_mem_microvolts, 0444,
+ regulator_suspend_mem_uV_show, NULL),
+ __ATTR(suspend_disk_microvolts, 0444,
+ regulator_suspend_disk_uV_show, NULL),
+ __ATTR(suspend_standby_microvolts, 0444,
+ regulator_suspend_standby_uV_show, NULL),
+ __ATTR(suspend_mem_mode, 0444,
+ regulator_suspend_mem_mode_show, NULL),
+ __ATTR(suspend_disk_mode, 0444,
+ regulator_suspend_disk_mode_show, NULL),
+ __ATTR(suspend_standby_mode, 0444,
+ regulator_suspend_standby_mode_show, NULL),
+ __ATTR(suspend_mem_state, 0444,
+ regulator_suspend_mem_state_show, NULL),
+ __ATTR(suspend_disk_state, 0444,
+ regulator_suspend_disk_state_show, NULL),
+ __ATTR(suspend_standby_state, 0444,
+ regulator_suspend_standby_state_show, NULL),
+ __ATTR_NULL,
+};
+
+static void regulator_dev_release(struct device *dev)
+{
+ struct regulator_dev *rdev = to_rdev(dev);
+ kfree(rdev);
+}
+
+static struct class regulator_class = {
+ .name = "regulator",
+ .dev_release = regulator_dev_release,
+ .dev_attrs = regulator_dev_attrs,
+};
+
+/* Calculate the new optimum regulator operating mode based on the new total
+ * consumer load. All locks held by caller */
+static void drms_uA_update(struct regulator_dev *rdev)
+{
+ struct regulator *sibling;
+ int current_uA = 0, output_uV, input_uV, err;
+ unsigned int mode;
+
+ err = regulator_check_drms(rdev);
+ if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
+ !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
+ return;
+
+ /* get output voltage */
+ output_uV = rdev->desc->ops->get_voltage(rdev);
+ if (output_uV <= 0)
+ return;
+
+ /* get input voltage */
+ if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+ input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+ else
+ input_uV = rdev->constraints->input_uV;
+ if (input_uV <= 0)
+ return;
+
+ /* calc total requested load */
+ list_for_each_entry(sibling, &rdev->consumer_list, list)
+ current_uA += sibling->uA_load;
+
+ /* now get the optimum mode for our new total regulator load */
+ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
+ output_uV, current_uA);
+
+ /* check the new mode is allowed */
+ err = regulator_check_mode(rdev, mode);
+ if (err == 0)
+ rdev->desc->ops->set_mode(rdev, mode);
+}
+
+static int suspend_set_state(struct regulator_dev *rdev,
+ struct regulator_state *rstate)
+{
+ int ret = 0;
+
+ /* enable & disable are mandatory for suspend control */
+ if (!rdev->desc->ops->set_suspend_enable ||
+ !rdev->desc->ops->set_suspend_disable)
+ return -EINVAL;
+
+ if (rstate->enabled)
+ ret = rdev->desc->ops->set_suspend_enable(rdev);
+ else
+ ret = rdev->desc->ops->set_suspend_disable(rdev);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to enabled/disable\n", __func__);
+ return ret;
+ }
+
+ if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
+ ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to set voltage\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
+ ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to set mode\n", __func__);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/* locks held by caller */
+static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
+{
+ if (!rdev->constraints)
+ return -EINVAL;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return suspend_set_state(rdev,
+ &rdev->constraints->state_standby);
+ case PM_SUSPEND_MEM:
+ return suspend_set_state(rdev,
+ &rdev->constraints->state_mem);
+ case PM_SUSPEND_MAX:
+ return suspend_set_state(rdev,
+ &rdev->constraints->state_disk);
+ default:
+ return -EINVAL;
+ }
+}
+
+static void print_constraints(struct regulator_dev *rdev)
+{
+ struct regulation_constraints *constraints = rdev->constraints;
+ char buf[80];
+ int count;
+
+ if (rdev->desc->type == REGULATOR_VOLTAGE) {
+ if (constraints->min_uV == constraints->max_uV)
+ count = sprintf(buf, "%d mV ",
+ constraints->min_uV / 1000);
+ else
+ count = sprintf(buf, "%d <--> %d mV ",
+ constraints->min_uV / 1000,
+ constraints->max_uV / 1000);
+ } else {
+ if (constraints->min_uA == constraints->max_uA)
+ count = sprintf(buf, "%d mA ",
+ constraints->min_uA / 1000);
+ else
+ count = sprintf(buf, "%d <--> %d mA ",
+ constraints->min_uA / 1000,
+ constraints->max_uA / 1000);
+ }
+ if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
+ count += sprintf(buf + count, "fast ");
+ if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
+ count += sprintf(buf + count, "normal ");
+ if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
+ count += sprintf(buf + count, "idle ");
+ if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
+ count += sprintf(buf + count, "standby");
+
+ printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf);
+}
+
+#define REG_STR_SIZE 32
+
+static struct regulator *create_regulator(struct regulator_dev *rdev,
+ struct device *dev,
+ const char *supply_name)
+{
+ struct regulator *regulator;
+ char buf[REG_STR_SIZE];
+ int err, size;
+
+ regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
+ if (regulator == NULL)
+ return NULL;
+
+ mutex_lock(&rdev->mutex);
+ regulator->rdev = rdev;
+ list_add(®ulator->list, &rdev->consumer_list);
+
+ if (dev) {
+ /* create a 'requested_microamps_name' sysfs entry */
+ size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s",
+ supply_name);
+ if (size >= REG_STR_SIZE)
+ goto overflow_err;
+
+ regulator->dev = dev;
+ regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
+ if (regulator->dev_attr.attr.name == NULL)
+ goto attr_name_err;
+
+ regulator->dev_attr.attr.owner = THIS_MODULE;
+ regulator->dev_attr.attr.mode = 0444;
+ regulator->dev_attr.show = device_requested_uA_show;
+ err = device_create_file(dev, ®ulator->dev_attr);
+ if (err < 0) {
+ printk(KERN_WARNING "%s: could not add regulator_dev"
+ " load sysfs\n", __func__);
+ goto attr_name_err;
+ }
+
+ /* also add a link to the device sysfs entry */
+ size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
+ dev->kobj.name, supply_name);
+ if (size >= REG_STR_SIZE)
+ goto attr_err;
+
+ regulator->supply_name = kstrdup(buf, GFP_KERNEL);
+ if (regulator->supply_name == NULL)
+ goto attr_err;
+
+ err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
+ buf);
+ if (err) {
+ printk(KERN_WARNING
+ "%s: could not add device link %s err %d\n",
+ __func__, dev->kobj.name, err);
+ device_remove_file(dev, ®ulator->dev_attr);
+ goto link_name_err;
+ }
+ }
+ mutex_unlock(&rdev->mutex);
+ return regulator;
+link_name_err:
+ kfree(regulator->supply_name);
+attr_err:
+ device_remove_file(regulator->dev, ®ulator->dev_attr);
+attr_name_err:
+ kfree(regulator->dev_attr.attr.name);
+overflow_err:
+ list_del(®ulator->list);
+ kfree(regulator);
+ mutex_unlock(&rdev->mutex);
+ return NULL;
+}
+
+/**
+ * regulator_get - lookup and obtain a reference to a regulator.
+ * @dev: device for regulator "consumer"
+ * @id: Supply name or regulator ID.
+ *
+ * Returns a struct regulator corresponding to the regulator producer,
+ * or IS_ERR() condition containing errno. Use of supply names
+ * configured via regulator_set_device_supply() is strongly
+ * encouraged.
+ */
+struct regulator *regulator_get(struct device *dev, const char *id)
+{
+ struct regulator_dev *rdev;
+ struct regulator_map *map;
+ struct regulator *regulator = ERR_PTR(-ENODEV);
+ const char *supply = id;
+
+ if (id == NULL) {
+ printk(KERN_ERR "regulator: get() with no identifier\n");
+ return regulator;
+ }
+
+ mutex_lock(®ulator_list_mutex);
+
+ list_for_each_entry(map, ®ulator_map_list, list) {
+ if (dev == map->dev &&
+ strcmp(map->supply, id) == 0) {
+ supply = map->regulator;
+ break;
+ }
+ }
+
+ list_for_each_entry(rdev, ®ulator_list, list) {
+ if (strcmp(supply, rdev->desc->name) == 0 &&
+ try_module_get(rdev->owner))
+ goto found;
+ }
+ printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n",
+ id);
+ mutex_unlock(®ulator_list_mutex);
+ return regulator;
+
+found:
+ regulator = create_regulator(rdev, dev, id);
+ if (regulator == NULL) {
+ regulator = ERR_PTR(-ENOMEM);
+ module_put(rdev->owner);
+ }
+
+ mutex_unlock(®ulator_list_mutex);
+ return regulator;
+}
+EXPORT_SYMBOL_GPL(regulator_get);
+
+/**
+ * regulator_put - "free" the regulator source
+ * @regulator: regulator source
+ *
+ * Note: drivers must ensure that all regulator_enable calls made on this
+ * regulator source are balanced by regulator_disable calls prior to calling
+ * this function.
+ */
+void regulator_put(struct regulator *regulator)
+{
+ struct regulator_dev *rdev;
+
+ if (regulator == NULL || IS_ERR(regulator))
+ return;
+
+ if (regulator->enabled) {
+ printk(KERN_WARNING "Releasing supply %s while enabled\n",
+ regulator->supply_name);
+ WARN_ON(regulator->enabled);
+ regulator_disable(regulator);
+ }
+
+ mutex_lock(®ulator_list_mutex);
+ rdev = regulator->rdev;
+
+ /* remove any sysfs entries */
+ if (regulator->dev) {
+ sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
+ kfree(regulator->supply_name);
+ device_remove_file(regulator->dev, ®ulator->dev_attr);
+ kfree(regulator->dev_attr.attr.name);
+ }
+ list_del(®ulator->list);
+ kfree(regulator);
+
+ module_put(rdev->owner);
+ mutex_unlock(®ulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_put);
+
+/* locks held by regulator_enable() */
+static int _regulator_enable(struct regulator_dev *rdev)
+{
+ int ret = -EINVAL;
+
+ if (!rdev->constraints) {
+ printk(KERN_ERR "%s: %s has no constraints\n",
+ __func__, rdev->desc->name);
+ return ret;
+ }
+
+ /* do we need to enable the supply regulator first */
+ if (rdev->supply) {
+ ret = _regulator_enable(rdev->supply);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to enable %s: %d\n",
+ __func__, rdev->desc->name, ret);
+ return ret;
+ }
+ }
+
+ /* check voltage and requested load before enabling */
+ if (rdev->desc->ops->enable) {
+
+ if (rdev->constraints &&
+ (rdev->constraints->valid_ops_mask &
+ REGULATOR_CHANGE_DRMS))
+ drms_uA_update(rdev);
+
+ ret = rdev->desc->ops->enable(rdev);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to enable %s: %d\n",
+ __func__, rdev->desc->name, ret);
+ return ret;
+ }
+ rdev->use_count++;
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
+ * regulator_enable - enable regulator output
+ * @regulator: regulator source
+ *
+ * Enable the regulator output at the predefined voltage or current value.
+ * NOTE: the output value can be set by other drivers, boot loader or may be
+ * hardwired in the regulator.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_enable(struct regulator *regulator)
+{
+ int ret;
+
+ if (regulator->enabled) {
+ printk(KERN_CRIT "Regulator %s already enabled\n",
+ regulator->supply_name);
+ WARN_ON(regulator->enabled);
+ return 0;
+ }
+
+ mutex_lock(®ulator->rdev->mutex);
+ regulator->enabled = 1;
+ ret = _regulator_enable(regulator->rdev);
+ if (ret != 0)
+ regulator->enabled = 0;
+ mutex_unlock(®ulator->rdev->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_enable);
+
+/* locks held by regulator_disable() */
+static int _regulator_disable(struct regulator_dev *rdev)
+{
+ int ret = 0;
+
+ /* are we the last user and permitted to disable ? */
+ if (rdev->use_count == 1 && !rdev->constraints->always_on) {
+
+ /* we are last user */
+ if (rdev->desc->ops->disable) {
+ ret = rdev->desc->ops->disable(rdev);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to disable %s\n",
+ __func__, rdev->desc->name);
+ return ret;
+ }
+ }
+
+ /* decrease our supplies ref count and disable if required */
+ if (rdev->supply)
+ _regulator_disable(rdev->supply);
+
+ rdev->use_count = 0;
+ } else if (rdev->use_count > 1) {
+
+ if (rdev->constraints &&
+ (rdev->constraints->valid_ops_mask &
+ REGULATOR_CHANGE_DRMS))
+ drms_uA_update(rdev);
+
+ rdev->use_count--;
+ }
+ return ret;
+}
+
+/**
+ * regulator_disable - disable regulator output
+ * @regulator: regulator source
+ *
+ * Disable the regulator output voltage or current.
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled.
+ * NOTE: calls to regulator_enable() must be balanced with calls to
+ * regulator_disable().
+ */
+int regulator_disable(struct regulator *regulator)
+{
+ int ret;
+
+ if (!regulator->enabled) {
+ printk(KERN_ERR "%s: not in use by this consumer\n",
+ __func__);
+ return 0;
+ }
+
+ mutex_lock(®ulator->rdev->mutex);
+ regulator->enabled = 0;
+ regulator->uA_load = 0;
+ ret = _regulator_disable(regulator->rdev);
+ mutex_unlock(®ulator->rdev->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_disable);
+
+/* locks held by regulator_force_disable() */
+static int _regulator_force_disable(struct regulator_dev *rdev)
+{
+ int ret = 0;
+
+ /* force disable */
+ if (rdev->desc->ops->disable) {
+ /* ah well, who wants to live forever... */
+ ret = rdev->desc->ops->disable(rdev);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to force disable %s\n",
+ __func__, rdev->desc->name);
+ return ret;
+ }
+ /* notify other consumers that power has been forced off */
+ _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE,
+ NULL);
+ }
+
+ /* decrease our supplies ref count and disable if required */
+ if (rdev->supply)
+ _regulator_disable(rdev->supply);
+
+ rdev->use_count = 0;
+ return ret;
+}
+
+/**
+ * regulator_force_disable - force disable regulator output
+ * @regulator: regulator source
+ *
+ * Forcibly disable the regulator output voltage or current.
+ * NOTE: this *will* disable the regulator output even if other consumer
+ * devices have it enabled. This should be used for situations when device
+ * damage will likely occur if the regulator is not disabled (e.g. over temp).
+ */
+int regulator_force_disable(struct regulator *regulator)
+{
+ int ret;
+
+ mutex_lock(®ulator->rdev->mutex);
+ regulator->enabled = 0;
+ regulator->uA_load = 0;
+ ret = _regulator_force_disable(regulator->rdev);
+ mutex_unlock(®ulator->rdev->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_force_disable);
+
+static int _regulator_is_enabled(struct regulator_dev *rdev)
+{
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+
+ /* sanity check */
+ if (!rdev->desc->ops->is_enabled) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = rdev->desc->ops->is_enabled(rdev);
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+
+/**
+ * regulator_is_enabled - is the regulator output enabled
+ * @regulator: regulator source
+ *
+ * Returns zero for disabled otherwise return number of enable requests.
+ */
+int regulator_is_enabled(struct regulator *regulator)
+{
+ return _regulator_is_enabled(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_is_enabled);
+
+/**
+ * regulator_set_voltage - set regulator output voltage
+ * @regulator: regulator source
+ * @min_uV: Minimum required voltage in uV
+ * @max_uV: Maximum acceptable voltage in uV
+ *
+ * Sets a voltage regulator to the desired output voltage. This can be set
+ * during any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the voltage will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new voltage when enabled.
+ *
+ * NOTE: If the regulator is shared between several devices then the lowest
+ * request voltage that meets the system constraints will be used.
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+
+ /* sanity check */
+ if (!rdev->desc->ops->set_voltage) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* constraints check */
+ ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
+ if (ret < 0)
+ goto out;
+ regulator->min_uV = min_uV;
+ regulator->max_uV = max_uV;
+ ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV);
+
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage);
+
+static int _regulator_get_voltage(struct regulator_dev *rdev)
+{
+ /* sanity check */
+ if (rdev->desc->ops->get_voltage)
+ return rdev->desc->ops->get_voltage(rdev);
+ else
+ return -EINVAL;
+}
+
+/**
+ * regulator_get_voltage - get regulator output voltage
+ * @regulator: regulator source
+ *
+ * This returns the current regulator voltage in uV.
+ *
+ * NOTE: If the regulator is disabled it will return the voltage value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_voltage(struct regulator *regulator)
+{
+ int ret;
+
+ mutex_lock(®ulator->rdev->mutex);
+
+ ret = _regulator_get_voltage(regulator->rdev);
+
+ mutex_unlock(®ulator->rdev->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage);
+
+/**
+ * regulator_set_current_limit - set regulator output current limit
+ * @regulator: regulator source
+ * @min_uA: Minimuum supported current in uA
+ * @max_uA: Maximum supported current in uA
+ *
+ * Sets current sink to the desired output current. This can be set during
+ * any regulator state. IOW, regulator can be disabled or enabled.
+ *
+ * If the regulator is enabled then the current will change to the new value
+ * immediately otherwise if the regulator is disabled the regulator will
+ * output at the new current when enabled.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_current_limit(struct regulator *regulator,
+ int min_uA, int max_uA)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+
+ /* sanity check */
+ if (!rdev->desc->ops->set_current_limit) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* constraints check */
+ ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
+ if (ret < 0)
+ goto out;
+
+ ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_current_limit);
+
+static int _regulator_get_current_limit(struct regulator_dev *rdev)
+{
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+
+ /* sanity check */
+ if (!rdev->desc->ops->get_current_limit) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = rdev->desc->ops->get_current_limit(rdev);
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+
+/**
+ * regulator_get_current_limit - get regulator output current
+ * @regulator: regulator source
+ *
+ * This returns the current supplied by the specified current sink in uA.
+ *
+ * NOTE: If the regulator is disabled it will return the current value. This
+ * function should not be used to determine regulator state.
+ */
+int regulator_get_current_limit(struct regulator *regulator)
+{
+ return _regulator_get_current_limit(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_current_limit);
+
+/**
+ * regulator_set_mode - set regulator operating mode
+ * @regulator: regulator source
+ * @mode: operating mode - one of the REGULATOR_MODE constants
+ *
+ * Set regulator operating mode to increase regulator efficiency or improve
+ * regulation performance.
+ *
+ * NOTE: Regulator system constraints must be set for this regulator before
+ * calling this function otherwise this call will fail.
+ */
+int regulator_set_mode(struct regulator *regulator, unsigned int mode)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+
+ /* sanity check */
+ if (!rdev->desc->ops->set_mode) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* constraints check */
+ ret = regulator_check_mode(rdev, mode);
+ if (ret < 0)
+ goto out;
+
+ ret = rdev->desc->ops->set_mode(rdev, mode);
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_mode);
+
+static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
+{
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+
+ /* sanity check */
+ if (!rdev->desc->ops->get_mode) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = rdev->desc->ops->get_mode(rdev);
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+
+/**
+ * regulator_get_mode - get regulator operating mode
+ * @regulator: regulator source
+ *
+ * Get the current regulator operating mode.
+ */
+unsigned int regulator_get_mode(struct regulator *regulator)
+{
+ return _regulator_get_mode(regulator->rdev);
+}
+EXPORT_SYMBOL_GPL(regulator_get_mode);
+
+/**
+ * regulator_set_optimum_mode - set regulator optimum operating mode
+ * @regulator: regulator source
+ * @uA_load: load current
+ *
+ * Notifies the regulator core of a new device load. This is then used by
+ * DRMS (if enabled by constraints) to set the most efficient regulator
+ * operating mode for the new regulator loading.
+ *
+ * Consumer devices notify their supply regulator of the maximum power
+ * they will require (can be taken from device datasheet in the power
+ * consumption tables) when they change operational status and hence power
+ * state. Examples of operational state changes that can affect power
+ * consumption are :-
+ *
+ * o Device is opened / closed.
+ * o Device I/O is about to begin or has just finished.
+ * o Device is idling in between work.
+ *
+ * This information is also exported via sysfs to userspace.
+ *
+ * DRMS will sum the total requested load on the regulator and change
+ * to the most efficient operating mode if platform constraints allow.
+ *
+ * Returns the new regulator mode or error.
+ */
+int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ struct regulator *consumer;
+ int ret, output_uV, input_uV, total_uA_load = 0;
+ unsigned int mode;
+
+ mutex_lock(&rdev->mutex);
+
+ regulator->uA_load = uA_load;
+ ret = regulator_check_drms(rdev);
+ if (ret < 0)
+ goto out;
+ ret = -EINVAL;
+
+ /* sanity check */
+ if (!rdev->desc->ops->get_optimum_mode)
+ goto out;
+
+ /* get output voltage */
+ output_uV = rdev->desc->ops->get_voltage(rdev);
+ if (output_uV <= 0) {
+ printk(KERN_ERR "%s: invalid output voltage found for %s\n",
+ __func__, rdev->desc->name);
+ goto out;
+ }
+
+ /* get input voltage */
+ if (rdev->supply && rdev->supply->desc->ops->get_voltage)
+ input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply);
+ else
+ input_uV = rdev->constraints->input_uV;
+ if (input_uV <= 0) {
+ printk(KERN_ERR "%s: invalid input voltage found for %s\n",
+ __func__, rdev->desc->name);
+ goto out;
+ }
+
+ /* calc total requested load for this regulator */
+ list_for_each_entry(consumer, &rdev->consumer_list, list)
+ total_uA_load += consumer->uA_load;
+
+ mode = rdev->desc->ops->get_optimum_mode(rdev,
+ input_uV, output_uV,
+ total_uA_load);
+ if (ret <= 0) {
+ printk(KERN_ERR "%s: failed to get optimum mode for %s @"
+ " %d uA %d -> %d uV\n", __func__, rdev->desc->name,
+ total_uA_load, input_uV, output_uV);
+ goto out;
+ }
+
+ ret = rdev->desc->ops->set_mode(rdev, mode);
+ if (ret <= 0) {
+ printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
+ __func__, mode, rdev->desc->name);
+ goto out;
+ }
+ ret = mode;
+out:
+ mutex_unlock(&rdev->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
+
+/**
+ * regulator_register_notifier - register regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Register notifier block to receive regulator events.
+ */
+int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(®ulator->rdev->notifier,
+ nb);
+}
+EXPORT_SYMBOL_GPL(regulator_register_notifier);
+
+/**
+ * regulator_unregister_notifier - unregister regulator event notifier
+ * @regulator: regulator source
+ * @notifier_block: notifier block
+ *
+ * Unregister regulator event notifier block.
+ */
+int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(®ulator->rdev->notifier,
+ nb);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
+
+/* notify regulator consumers and downstream regulator consumers */
+static void _notifier_call_chain(struct regulator_dev *rdev,
+ unsigned long event, void *data)
+{
+ struct regulator_dev *_rdev;
+
+ /* call rdev chain first */
+ mutex_lock(&rdev->mutex);
+ blocking_notifier_call_chain(&rdev->notifier, event, NULL);
+ mutex_unlock(&rdev->mutex);
+
+ /* now notify regulator we supply */
+ list_for_each_entry(_rdev, &rdev->supply_list, slist)
+ _notifier_call_chain(_rdev, event, data);
+}
+
+/**
+ * regulator_bulk_get - get multiple regulator consumers
+ *
+ * @dev: Device to supply
+ * @num_consumers: Number of consumers to register
+ * @consumers: Configuration of consumers; clients are stored here.
+ *
+ * @return 0 on success, an errno on failure.
+ *
+ * This helper function allows drivers to get several regulator
+ * consumers in one operation. If any of the regulators cannot be
+ * acquired then any regulators that were allocated will be freed
+ * before returning to the caller.
+ */
+int regulator_bulk_get(struct device *dev, int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < num_consumers; i++)
+ consumers[i].consumer = NULL;
+
+ for (i = 0; i < num_consumers; i++) {
+ consumers[i].consumer = regulator_get(dev,
+ consumers[i].supply);
+ if (IS_ERR(consumers[i].consumer)) {
+ dev_err(dev, "Failed to get supply '%s'\n",
+ consumers[i].supply);
+ ret = PTR_ERR(consumers[i].consumer);
+ consumers[i].consumer = NULL;
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ for (i = 0; i < num_consumers && consumers[i].consumer; i++)
+ regulator_put(consumers[i].consumer);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_get);
+
+/**
+ * regulator_bulk_enable - enable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers: Consumer data; clients are stored here.
+ * @return 0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to enable multiple regulator
+ * clients in a single API call. If any consumers cannot be enabled
+ * then any others that were enabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_enable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < num_consumers; i++) {
+ ret = regulator_enable(consumers[i].consumer);
+ if (ret != 0)
+ goto err;
+ }
+
+ return 0;
+
+err:
+ printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply);
+ for (i = 0; i < num_consumers; i++)
+ regulator_disable(consumers[i].consumer);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_enable);
+
+/**
+ * regulator_bulk_disable - disable multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers: Consumer data; clients are stored here.
+ * @return 0 on success, an errno on failure
+ *
+ * This convenience API allows consumers to disable multiple regulator
+ * clients in a single API call. If any consumers cannot be enabled
+ * then any others that were disabled will be disabled again prior to
+ * return.
+ */
+int regulator_bulk_disable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < num_consumers; i++) {
+ ret = regulator_disable(consumers[i].consumer);
+ if (ret != 0)
+ goto err;
+ }
+
+ return 0;
+
+err:
+ printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply);
+ for (i = 0; i < num_consumers; i++)
+ regulator_enable(consumers[i].consumer);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_disable);
+
+/**
+ * regulator_bulk_free - free multiple regulator consumers
+ *
+ * @num_consumers: Number of consumers
+ * @consumers: Consumer data; clients are stored here.
+ *
+ * This convenience API allows consumers to free multiple regulator
+ * clients in a single API call.
+ */
+void regulator_bulk_free(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ int i;
+
+ for (i = 0; i < num_consumers; i++) {
+ regulator_put(consumers[i].consumer);
+ consumers[i].consumer = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_free);
+
+/**
+ * regulator_notifier_call_chain - call regulator event notifier
+ * @regulator: regulator source
+ * @event: notifier block
+ * @data:
+ *
+ * Called by regulator drivers to notify clients a regulator event has
+ * occurred. We also notify regulator clients downstream.
+ */
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+ unsigned long event, void *data)
+{
+ _notifier_call_chain(rdev, event, data);
+ return NOTIFY_DONE;
+
+}
+EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
+
+/**
+ * regulator_register - register regulator
+ * @regulator: regulator source
+ * @reg_data: private regulator data
+ *
+ * Called by regulator drivers to register a regulator.
+ * Returns 0 on success.
+ */
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+ void *reg_data)
+{
+ static atomic_t regulator_no = ATOMIC_INIT(0);
+ struct regulator_dev *rdev;
+ int ret;
+
+ if (regulator_desc == NULL)
+ return ERR_PTR(-EINVAL);
+
+ if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
+ return ERR_PTR(-EINVAL);
+
+ if (!regulator_desc->type == REGULATOR_VOLTAGE &&
+ !regulator_desc->type == REGULATOR_CURRENT)
+ return ERR_PTR(-EINVAL);
+
+ rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
+ if (rdev == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(®ulator_list_mutex);
+
+ mutex_init(&rdev->mutex);
+ rdev->reg_data = reg_data;
+ rdev->owner = regulator_desc->owner;
+ rdev->desc = regulator_desc;
+ INIT_LIST_HEAD(&rdev->consumer_list);
+ INIT_LIST_HEAD(&rdev->supply_list);
+ INIT_LIST_HEAD(&rdev->list);
+ INIT_LIST_HEAD(&rdev->slist);
+ BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+
+ rdev->dev.class = ®ulator_class;
+ device_initialize(&rdev->dev);
+ snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
+ "regulator_%ld_%s",
+ (unsigned long)atomic_inc_return(®ulator_no) - 1,
+ regulator_desc->name);
+
+ ret = device_add(&rdev->dev);
+ if (ret == 0)
+ list_add(&rdev->list, ®ulator_list);
+ else {
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ }
+ mutex_unlock(®ulator_list_mutex);
+ return rdev;
+}
+EXPORT_SYMBOL_GPL(regulator_register);
+
+/**
+ * regulator_unregister - unregister regulator
+ * @regulator: regulator source
+ *
+ * Called by regulator drivers to unregister a regulator.
+ */
+void regulator_unregister(struct regulator_dev *rdev)
+{
+ if (rdev == NULL)
+ return;
+
+ mutex_lock(®ulator_list_mutex);
+ list_del(&rdev->list);
+ if (rdev->supply)
+ sysfs_remove_link(&rdev->dev.kobj, "supply");
+ device_unregister(&rdev->dev);
+ mutex_unlock(®ulator_list_mutex);
+}
+EXPORT_SYMBOL_GPL(regulator_unregister);
+
+/**
+ * regulator_set_supply - set regulator supply regulator
+ * @regulator: regulator name
+ * @supply: supply regulator name
+ *
+ * Called by platform initialisation code to set the supply regulator for this
+ * regulator. This ensures that a regulators supply will also be enabled by the
+ * core if it's child is enabled.
+ */
+int regulator_set_supply(const char *regulator, const char *supply)
+{
+ struct regulator_dev *rdev, *supply_rdev;
+ int err;
+
+ if (regulator == NULL || supply == NULL)
+ return -EINVAL;
+
+ mutex_lock(®ulator_list_mutex);
+
+ list_for_each_entry(rdev, ®ulator_list, list) {
+ if (!strcmp(rdev->desc->name, regulator))
+ goto found_regulator;
+ }
+ mutex_unlock(®ulator_list_mutex);
+ return -ENODEV;
+
+found_regulator:
+ list_for_each_entry(supply_rdev, ®ulator_list, list) {
+ if (!strcmp(supply_rdev->desc->name, supply))
+ goto found_supply;
+ }
+ mutex_unlock(®ulator_list_mutex);
+ return -ENODEV;
+
+found_supply:
+ err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
+ "supply");
+ if (err) {
+ printk(KERN_ERR
+ "%s: could not add device link %s err %d\n",
+ __func__, supply_rdev->dev.kobj.name, err);
+ goto out;
+ }
+ rdev->supply = supply_rdev;
+ list_add(&rdev->slist, &supply_rdev->supply_list);
+out:
+ mutex_unlock(®ulator_list_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(regulator_set_supply);
+
+/**
+ * regulator_get_supply - get regulator supply regulator
+ * @regulator: regulator name
+ *
+ * Returns the supply supply regulator name or NULL if no supply regulator
+ * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc)
+ */
+const char *regulator_get_supply(const char *regulator)
+{
+ struct regulator_dev *rdev;
+
+ if (regulator == NULL)
+ return NULL;
+
+ mutex_lock(®ulator_list_mutex);
+ list_for_each_entry(rdev, ®ulator_list, list) {
+ if (!strcmp(rdev->desc->name, regulator))
+ goto found;
+ }
+ mutex_unlock(®ulator_list_mutex);
+ return NULL;
+
+found:
+ mutex_unlock(®ulator_list_mutex);
+ if (rdev->supply)
+ return rdev->supply->desc->name;
+ else
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(regulator_get_supply);
+
+/**
+ * regulator_set_machine_constraints - sets regulator constraints
+ * @regulator: regulator source
+ *
+ * Allows platform initialisation code to define and constrain
+ * regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
+ * Constraints *must* be set by platform code in order for some
+ * regulator operations to proceed i.e. set_voltage, set_current_limit,
+ * set_mode.
+ */
+int regulator_set_machine_constraints(const char *regulator_name,
+ struct regulation_constraints *constraints)
+{
+ struct regulator_dev *rdev;
+ int ret = 0;
+
+ if (regulator_name == NULL)
+ return -EINVAL;
+
+ mutex_lock(®ulator_list_mutex);
+
+ list_for_each_entry(rdev, ®ulator_list, list) {
+ if (!strcmp(regulator_name, rdev->desc->name))
+ goto found;
+ }
+ ret = -ENODEV;
+ goto out;
+
+found:
+ mutex_lock(&rdev->mutex);
+ rdev->constraints = constraints;
+
+ /* do we need to apply the constraint voltage */
+ if (rdev->constraints->apply_uV &&
+ rdev->constraints->min_uV == rdev->constraints->max_uV &&
+ rdev->desc->ops->set_voltage) {
+ ret = rdev->desc->ops->set_voltage(rdev,
+ rdev->constraints->min_uV, rdev->constraints->max_uV);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to apply %duV"
+ " constraint\n", __func__,
+ rdev->constraints->min_uV);
+ rdev->constraints = NULL;
+ goto out;
+ }
+ }
+
+ /* are we enabled at boot time by firmware / bootloader */
+ if (rdev->constraints->boot_on)
+ rdev->use_count = 1;
+
+ /* do we need to setup our suspend state */
+ if (constraints->initial_state)
+ ret = suspend_prepare(rdev, constraints->initial_state);
+
+ print_constraints(rdev);
+ mutex_unlock(&rdev->mutex);
+
+out:
+ mutex_unlock(®ulator_list_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_machine_constraints);
+
+
+/**
+ * regulator_set_device_supply: Bind a regulator to a symbolic supply
+ * @regulator: regulator source
+ * @dev: device the supply applies to
+ * @supply: symbolic name for supply
+ *
+ * Allows platform initialisation code to map physical regulator
+ * sources to symbolic names for supplies for use by devices. Devices
+ * should use these symbolic names to request regulators, avoiding the
+ * need to provide board-specific regulator names as platform data.
+ */
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+ const char *supply)
+{
+ struct regulator_map *node;
+
+ if (regulator == NULL || supply == NULL)
+ return -EINVAL;
+
+ node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+ if (node == NULL)
+ return -ENOMEM;
+
+ node->regulator = regulator;
+ node->dev = dev;
+ node->supply = supply;
+
+ mutex_lock(®ulator_list_mutex);
+ list_add(&node->list, ®ulator_map_list);
+ mutex_unlock(®ulator_list_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_set_device_supply);
+
+/**
+ * regulator_suspend_prepare: prepare regulators for system wide suspend
+ * @state: system suspend state
+ *
+ * Configure each regulator with it's suspend operating parameters for state.
+ * This will usually be called by machine suspend code prior to supending.
+ */
+int regulator_suspend_prepare(suspend_state_t state)
+{
+ struct regulator_dev *rdev;
+ int ret = 0;
+
+ /* ON is handled by regulator active state */
+ if (state == PM_SUSPEND_ON)
+ return -EINVAL;
+
+ mutex_lock(®ulator_list_mutex);
+ list_for_each_entry(rdev, ®ulator_list, list) {
+
+ mutex_lock(&rdev->mutex);
+ ret = suspend_prepare(rdev, state);
+ mutex_unlock(&rdev->mutex);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to prepare %s\n",
+ __func__, rdev->desc->name);
+ goto out;
+ }
+ }
+out:
+ mutex_unlock(®ulator_list_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
+
+/**
+ * rdev_get_drvdata - get rdev regulator driver data
+ * @regulator: regulator
+ *
+ * Get rdev regulator driver private data. This call can be used in the
+ * regulator driver context.
+ */
+void *rdev_get_drvdata(struct regulator_dev *rdev)
+{
+ return rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(rdev_get_drvdata);
+
+/**
+ * regulator_get_drvdata - get regulator driver data
+ * @regulator: regulator
+ *
+ * Get regulator driver private data. This call can be used in the consumer
+ * driver context when non API regulator specific functions need to be called.
+ */
+void *regulator_get_drvdata(struct regulator *regulator)
+{
+ return regulator->rdev->reg_data;
+}
+EXPORT_SYMBOL_GPL(regulator_get_drvdata);
+
+/**
+ * regulator_set_drvdata - set regulator driver data
+ * @regulator: regulator
+ * @data: data
+ */
+void regulator_set_drvdata(struct regulator *regulator, void *data)
+{
+ regulator->rdev->reg_data = data;
+}
+EXPORT_SYMBOL_GPL(regulator_set_drvdata);
+
+/**
+ * regulator_get_id - get regulator ID
+ * @regulator: regulator
+ */
+int rdev_get_id(struct regulator_dev *rdev)
+{
+ return rdev->desc->id;
+}
+EXPORT_SYMBOL_GPL(rdev_get_id);
+
+static int __init regulator_init(void)
+{
+ printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
+ return class_register(®ulator_class);
+}
+
+/* init early to allow our consumers to complete system booting */
+core_initcall(regulator_init);
--- /dev/null
+/*
+ * fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+
+struct fixed_voltage_data {
+ struct regulator_desc desc;
+ struct regulator_dev *dev;
+ int microvolts;
+};
+
+static int fixed_voltage_is_enabled(struct regulator_dev *dev)
+{
+ return 1;
+}
+
+static int fixed_voltage_enable(struct regulator_dev *dev)
+{
+ return 0;
+}
+
+static int fixed_voltage_get_voltage(struct regulator_dev *dev)
+{
+ struct fixed_voltage_data *data = rdev_get_drvdata(dev);
+
+ return data->microvolts;
+}
+
+static struct regulator_ops fixed_voltage_ops = {
+ .is_enabled = fixed_voltage_is_enabled,
+ .enable = fixed_voltage_enable,
+ .get_voltage = fixed_voltage_get_voltage,
+};
+
+static int regulator_fixed_voltage_probe(struct platform_device *pdev)
+{
+ struct fixed_voltage_config *config = pdev->dev.platform_data;
+ struct fixed_voltage_data *drvdata;
+ int ret;
+
+ drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
+ if (drvdata == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+ if (drvdata->desc.name == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ drvdata->desc.type = REGULATOR_VOLTAGE;
+ drvdata->desc.owner = THIS_MODULE;
+ drvdata->desc.ops = &fixed_voltage_ops,
+
+ drvdata->microvolts = config->microvolts;
+
+ drvdata->dev = regulator_register(&drvdata->desc, drvdata);
+ if (IS_ERR(drvdata->dev)) {
+ ret = PTR_ERR(drvdata->dev);
+ goto err_name;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
+ drvdata->microvolts);
+
+ return 0;
+
+err_name:
+ kfree(drvdata->desc.name);
+err:
+ kfree(drvdata);
+ return ret;
+}
+
+static int regulator_fixed_voltage_remove(struct platform_device *pdev)
+{
+ struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
+
+ regulator_unregister(drvdata->dev);
+ kfree(drvdata->desc.name);
+ kfree(drvdata);
+
+ return 0;
+}
+
+static struct platform_driver regulator_fixed_voltage_driver = {
+ .probe = regulator_fixed_voltage_probe,
+ .remove = regulator_fixed_voltage_remove,
+ .driver = {
+ .name = "reg-fixed-voltage",
+ },
+};
+
+static int __init regulator_fixed_voltage_init(void)
+{
+ return platform_driver_register(®ulator_fixed_voltage_driver);
+}
+module_init(regulator_fixed_voltage_init);
+
+static void __exit regulator_fixed_voltage_exit(void)
+{
+ platform_driver_unregister(®ulator_fixed_voltage_driver);
+}
+module_exit(regulator_fixed_voltage_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Fixed voltage regulator");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * reg-virtual-consumer.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+struct virtual_consumer_data {
+ struct mutex lock;
+ struct regulator *regulator;
+ int enabled;
+ int min_uV;
+ int max_uV;
+ int min_uA;
+ int max_uA;
+ unsigned int mode;
+};
+
+static void update_voltage_constraints(struct virtual_consumer_data *data)
+{
+ int ret;
+
+ if (data->min_uV && data->max_uV
+ && data->min_uV <= data->max_uV) {
+ ret = regulator_set_voltage(data->regulator,
+ data->min_uV, data->max_uV);
+ if (ret != 0) {
+ printk(KERN_ERR "regulator_set_voltage() failed: %d\n",
+ ret);
+ return;
+ }
+ }
+
+ if (data->min_uV && data->max_uV && !data->enabled) {
+ ret = regulator_enable(data->regulator);
+ if (ret == 0)
+ data->enabled = 1;
+ else
+ printk(KERN_ERR "regulator_enable() failed: %d\n",
+ ret);
+ }
+
+ if (!(data->min_uV && data->max_uV) && data->enabled) {
+ ret = regulator_disable(data->regulator);
+ if (ret == 0)
+ data->enabled = 0;
+ else
+ printk(KERN_ERR "regulator_disable() failed: %d\n",
+ ret);
+ }
+}
+
+static void update_current_limit_constraints(struct virtual_consumer_data
+ *data)
+{
+ int ret;
+
+ if (data->max_uA
+ && data->min_uA <= data->max_uA) {
+ ret = regulator_set_current_limit(data->regulator,
+ data->min_uA, data->max_uA);
+ if (ret != 0) {
+ pr_err("regulator_set_current_limit() failed: %d\n",
+ ret);
+ return;
+ }
+ }
+
+ if (data->max_uA && !data->enabled) {
+ ret = regulator_enable(data->regulator);
+ if (ret == 0)
+ data->enabled = 1;
+ else
+ printk(KERN_ERR "regulator_enable() failed: %d\n",
+ ret);
+ }
+
+ if (!(data->min_uA && data->max_uA) && data->enabled) {
+ ret = regulator_disable(data->regulator);
+ if (ret == 0)
+ data->enabled = 0;
+ else
+ printk(KERN_ERR "regulator_disable() failed: %d\n",
+ ret);
+ }
+}
+
+static ssize_t show_min_uV(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", data->min_uV);
+}
+
+static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (strict_strtol(buf, 10, &val) != 0)
+ return count;
+
+ mutex_lock(&data->lock);
+
+ data->min_uV = val;
+ update_voltage_constraints(data);
+
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_max_uV(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", data->max_uV);
+}
+
+static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (strict_strtol(buf, 10, &val) != 0)
+ return count;
+
+ mutex_lock(&data->lock);
+
+ data->max_uV = val;
+ update_voltage_constraints(data);
+
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_min_uA(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", data->min_uA);
+}
+
+static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (strict_strtol(buf, 10, &val) != 0)
+ return count;
+
+ mutex_lock(&data->lock);
+
+ data->min_uA = val;
+ update_current_limit_constraints(data);
+
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_max_uA(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", data->max_uA);
+}
+
+static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (strict_strtol(buf, 10, &val) != 0)
+ return count;
+
+ mutex_lock(&data->lock);
+
+ data->max_uA = val;
+ update_current_limit_constraints(data);
+
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+
+ switch (data->mode) {
+ case REGULATOR_MODE_FAST:
+ return sprintf(buf, "fast\n");
+ case REGULATOR_MODE_NORMAL:
+ return sprintf(buf, "normal\n");
+ case REGULATOR_MODE_IDLE:
+ return sprintf(buf, "idle\n");
+ case REGULATOR_MODE_STANDBY:
+ return sprintf(buf, "standby\n");
+ default:
+ return sprintf(buf, "unknown\n");
+ }
+}
+
+static ssize_t set_mode(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct virtual_consumer_data *data = dev_get_drvdata(dev);
+ unsigned int mode;
+ int ret;
+
+ if (strncmp(buf, "fast", strlen("fast")) == 0)
+ mode = REGULATOR_MODE_FAST;
+ else if (strncmp(buf, "normal", strlen("normal")) == 0)
+ mode = REGULATOR_MODE_NORMAL;
+ else if (strncmp(buf, "idle", strlen("idle")) == 0)
+ mode = REGULATOR_MODE_IDLE;
+ else if (strncmp(buf, "standby", strlen("standby")) == 0)
+ mode = REGULATOR_MODE_STANDBY;
+ else {
+ dev_err(dev, "Configuring invalid mode\n");
+ return count;
+ }
+
+ mutex_lock(&data->lock);
+ ret = regulator_set_mode(data->regulator, mode);
+ if (ret == 0)
+ data->mode = mode;
+ else
+ dev_err(dev, "Failed to configure mode: %d\n", ret);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static DEVICE_ATTR(min_microvolts, 0666, show_min_uV, set_min_uV);
+static DEVICE_ATTR(max_microvolts, 0666, show_max_uV, set_max_uV);
+static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA);
+static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA);
+static DEVICE_ATTR(mode, 0666, show_mode, set_mode);
+
+struct device_attribute *attributes[] = {
+ &dev_attr_min_microvolts,
+ &dev_attr_max_microvolts,
+ &dev_attr_min_microamps,
+ &dev_attr_max_microamps,
+ &dev_attr_mode,
+};
+
+static int regulator_virtual_consumer_probe(struct platform_device *pdev)
+{
+ char *reg_id = pdev->dev.platform_data;
+ struct virtual_consumer_data *drvdata;
+ int ret, i;
+
+ drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL);
+ if (drvdata == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ mutex_init(&drvdata->lock);
+
+ drvdata->regulator = regulator_get(&pdev->dev, reg_id);
+ if (IS_ERR(drvdata->regulator)) {
+ ret = PTR_ERR(drvdata->regulator);
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(attributes); i++) {
+ ret = device_create_file(&pdev->dev, attributes[i]);
+ if (ret != 0)
+ goto err;
+ }
+
+ drvdata->mode = regulator_get_mode(drvdata->regulator);
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+
+err:
+ for (i = 0; i < ARRAY_SIZE(attributes); i++)
+ device_remove_file(&pdev->dev, attributes[i]);
+ kfree(drvdata);
+ return ret;
+}
+
+static int regulator_virtual_consumer_remove(struct platform_device *pdev)
+{
+ struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(attributes); i++)
+ device_remove_file(&pdev->dev, attributes[i]);
+ if (drvdata->enabled)
+ regulator_disable(drvdata->regulator);
+ regulator_put(drvdata->regulator);
+
+ kfree(drvdata);
+
+ return 0;
+}
+
+static struct platform_driver regulator_virtual_consumer_driver = {
+ .probe = regulator_virtual_consumer_probe,
+ .remove = regulator_virtual_consumer_remove,
+ .driver = {
+ .name = "reg-virt-consumer",
+ },
+};
+
+
+static int __init regulator_virtual_consumer_init(void)
+{
+ return platform_driver_register(®ulator_virtual_consumer_driver);
+}
+module_init(regulator_virtual_consumer_init);
+
+static void __exit regulator_virtual_consumer_exit(void)
+{
+ platform_driver_unregister(®ulator_virtual_consumer_driver);
+}
+module_exit(regulator_virtual_consumer_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("Virtual regulator consumer");
+MODULE_LICENSE("GPL");
else
search_unit_addr = uid->base_unit_addr;
list_for_each_entry(pos, &lcu->grouplist, group) {
- if (pos->uid.base_unit_addr == search_unit_addr)
+ if (pos->uid.base_unit_addr == search_unit_addr &&
+ !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit)))
return pos;
};
return NULL;
group->uid.base_unit_addr = uid->real_unit_addr;
else
group->uid.base_unit_addr = uid->base_unit_addr;
+ memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit));
INIT_LIST_HEAD(&group->group);
INIT_LIST_HEAD(&group->baselist);
INIT_LIST_HEAD(&group->aliaslist);
static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
#define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial */ 14 + 1 +\
- /* SSID */ 4 + 1 + /* unit addr */ 2 + 1)
+ /* SSID */ 4 + 1 + /* unit addr */ 2 + 1 +\
+ /* vduit */ 32 + 1)
static ssize_t
dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
sprintf(ua_string, "%02x", uid->real_unit_addr);
break;
}
- snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s",
- uid->vendor, uid->serial, uid->ssid, ua_string);
+ if (strlen(uid->vduit) > 0)
+ snprintf(uid_string, sizeof(uid_string),
+ "%s.%s.%04x.%s.%s",
+ uid->vendor, uid->serial,
+ uid->ssid, ua_string,
+ uid->vduit);
+ else
+ snprintf(uid_string, sizeof(uid_string),
+ "%s.%s.%04x.%s",
+ uid->vendor, uid->serial,
+ uid->ssid, ua_string);
spin_unlock(&dasd_devmap_lock);
return snprintf(buf, PAGE_SIZE, "%s\n", uid_string);
}
memset(pfxdata, 0, sizeof(*pfxdata));
/* prefix data */
pfxdata->format = 0;
- pfxdata->base_address = basepriv->conf_data.ned1.unit_addr;
- pfxdata->base_lss = basepriv->conf_data.ned1.ID;
+ pfxdata->base_address = basepriv->ned->unit_addr;
+ pfxdata->base_lss = basepriv->ned->ID;
pfxdata->validity.define_extend = 1;
/* private uid is kept up to date, conf_data may be outdated */
/*
* Generate device unique id that specifies the physical device.
*/
-static int
-dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+static int dasd_eckd_generate_uid(struct dasd_device *device,
+ struct dasd_uid *uid)
{
struct dasd_eckd_private *private;
- struct dasd_eckd_confdata *confdata;
+ int count;
private = (struct dasd_eckd_private *) device->private;
if (!private)
return -ENODEV;
- confdata = &private->conf_data;
- if (!confdata)
+ if (!private->ned || !private->gneq)
return -ENODEV;
memset(uid, 0, sizeof(struct dasd_uid));
- memcpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+ memcpy(uid->vendor, private->ned->HDA_manufacturer,
sizeof(uid->vendor) - 1);
EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
- memcpy(uid->serial, confdata->ned1.HDA_location,
+ memcpy(uid->serial, private->ned->HDA_location,
sizeof(uid->serial) - 1);
EBCASC(uid->serial, sizeof(uid->serial) - 1);
- uid->ssid = confdata->neq.subsystemID;
- uid->real_unit_addr = confdata->ned1.unit_addr;
- if (confdata->ned2.sneq.flags == 0x40 &&
- confdata->ned2.sneq.format == 0x0001) {
- uid->type = confdata->ned2.sneq.sua_flags;
+ uid->ssid = private->gneq->subsystemID;
+ uid->real_unit_addr = private->ned->unit_addr;;
+ if (private->sneq) {
+ uid->type = private->sneq->sua_flags;
if (uid->type == UA_BASE_PAV_ALIAS)
- uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr;
+ uid->base_unit_addr = private->sneq->base_unit_addr;
} else {
uid->type = UA_BASE_DEVICE;
}
+ if (private->vdsneq) {
+ for (count = 0; count < 16; count++) {
+ sprintf(uid->vduit+2*count, "%02x",
+ private->vdsneq->uit[count]);
+ }
+ }
return 0;
}
ret = -ENOMEM;
goto out_error;
}
+
+ /*
+ * buffer has to start with EBCDIC "V1.0" to show
+ * support for virtual device SNEQ
+ */
+ rcd_buf[0] = 0xE5;
+ rcd_buf[1] = 0xF1;
+ rcd_buf[2] = 0x4B;
+ rcd_buf[3] = 0xF0;
cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
if (IS_ERR(cqr)) {
ret = PTR_ERR(cqr);
return ret;
}
-static int
-dasd_eckd_read_conf(struct dasd_device *device)
+static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private)
+{
+
+ struct dasd_sneq *sneq;
+ int i, count;
+
+ private->ned = NULL;
+ private->sneq = NULL;
+ private->vdsneq = NULL;
+ private->gneq = NULL;
+ count = private->conf_len / sizeof(struct dasd_sneq);
+ sneq = (struct dasd_sneq *)private->conf_data;
+ for (i = 0; i < count; ++i) {
+ if (sneq->flags.identifier == 1 && sneq->format == 1)
+ private->sneq = sneq;
+ else if (sneq->flags.identifier == 1 && sneq->format == 4)
+ private->vdsneq = (struct vd_sneq *)sneq;
+ else if (sneq->flags.identifier == 2)
+ private->gneq = (struct dasd_gneq *)sneq;
+ else if (sneq->flags.identifier == 3 && sneq->res1 == 1)
+ private->ned = (struct dasd_ned *)sneq;
+ sneq++;
+ }
+ if (!private->ned || !private->gneq) {
+ private->ned = NULL;
+ private->sneq = NULL;
+ private->vdsneq = NULL;
+ private->gneq = NULL;
+ return -EINVAL;
+ }
+ return 0;
+
+};
+
+static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len)
+{
+ struct dasd_gneq *gneq;
+ int i, count, found;
+
+ count = conf_len / sizeof(*gneq);
+ gneq = (struct dasd_gneq *)conf_data;
+ found = 0;
+ for (i = 0; i < count; ++i) {
+ if (gneq->flags.identifier == 2) {
+ found = 1;
+ break;
+ }
+ gneq++;
+ }
+ if (found)
+ return ((char *)gneq)[18] & 0x07;
+ else
+ return 0;
+}
+
+static int dasd_eckd_read_conf(struct dasd_device *device)
{
void *conf_data;
int conf_len, conf_data_saved;
path_data->opm = ccw_device_get_path_mask(device->cdev);
lpm = 0x80;
conf_data_saved = 0;
-
/* get configuration data per operational path */
for (lpm = 0x80; lpm; lpm>>= 1) {
if (lpm & path_data->opm){
"data retrieved");
continue; /* no error */
}
- if (conf_len != sizeof(struct dasd_eckd_confdata)) {
- MESSAGE(KERN_WARNING,
- "sizes of configuration data mismatch"
- "%d (read) vs %ld (expected)",
- conf_len,
- sizeof(struct dasd_eckd_confdata));
- kfree(conf_data);
- continue; /* no error */
- }
/* save first valid configuration data */
- if (!conf_data_saved){
- memcpy(&private->conf_data, conf_data,
- sizeof(struct dasd_eckd_confdata));
+ if (!conf_data_saved) {
+ kfree(private->conf_data);
+ private->conf_data = conf_data;
+ private->conf_len = conf_len;
+ if (dasd_eckd_identify_conf_parts(private)) {
+ private->conf_data = NULL;
+ private->conf_len = 0;
+ kfree(conf_data);
+ continue;
+ }
conf_data_saved++;
}
- switch (((char *)conf_data)[242] & 0x07){
+ switch (dasd_eckd_path_access(conf_data, conf_len)) {
case 0x02:
path_data->npm |= lpm;
break;
path_data->ppm |= lpm;
break;
}
- kfree(conf_data);
+ if (conf_data != private->conf_data)
+ kfree(conf_data);
}
}
return 0;
dasd_free_block(device->block);
device->block = NULL;
out_err1:
+ kfree(private->conf_data);
kfree(device->private);
device->private = NULL;
return rc;
static void dasd_eckd_uncheck_device(struct dasd_device *device)
{
+ struct dasd_eckd_private *private;
+
+ private = (struct dasd_eckd_private *) device->private;
dasd_alias_disconnect_device_from_lcu(device);
+ private->ned = NULL;
+ private->sneq = NULL;
+ private->vdsneq = NULL;
+ private->gneq = NULL;
+ private->conf_len = 0;
+ kfree(private->conf_data);
+ private->conf_data = NULL;
}
static struct dasd_ccw_req *
info->characteristics_size = sizeof(struct dasd_eckd_characteristics);
memcpy(info->characteristics, &private->rdc_data,
sizeof(struct dasd_eckd_characteristics));
- info->confdata_size = sizeof(struct dasd_eckd_confdata);
- memcpy(info->configuration_data, &private->conf_data,
- sizeof(struct dasd_eckd_confdata));
+ info->confdata_size = min((unsigned long)private->conf_len,
+ sizeof(info->configuration_data));
+ memcpy(info->configuration_data, private->conf_data,
+ info->confdata_size);
return 0;
}
__u8 reserved3[10];
} __attribute__ ((packed));
-struct dasd_eckd_confdata {
+/* elements of the configuration data */
+struct dasd_ned {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 dev_class;
- __u8 reserved;
- unsigned char dev_type[6];
- unsigned char dev_model[3];
- unsigned char HDA_manufacturer[3];
- unsigned char HDA_location[2];
- unsigned char HDA_seqno[12];
- __u8 ID;
- __u8 unit_addr;
- } __attribute__ ((packed)) ned1;
- union {
- struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 reserved[2];
- unsigned char dev_type[6];
- unsigned char dev_model[3];
- unsigned char DASD_manufacturer[3];
- unsigned char DASD_location[2];
- unsigned char DASD_seqno[12];
- __u16 ID;
- } __attribute__ ((packed)) ned;
- struct {
- unsigned char flags; /* byte 0 */
- unsigned char res1; /* byte 1 */
- __u16 format; /* byte 2-3 */
- unsigned char res2[4]; /* byte 4-7 */
- unsigned char sua_flags; /* byte 8 */
- __u8 base_unit_addr; /* byte 9 */
- unsigned char res3[22]; /* byte 10-31 */
- } __attribute__ ((packed)) sneq;
- } __attribute__ ((packed)) ned2;
+ __u8 identifier:2;
+ __u8 token_id:1;
+ __u8 sno_valid:1;
+ __u8 subst_sno:1;
+ __u8 recNED:1;
+ __u8 emuNED:1;
+ __u8 reserved:1;
+ } __attribute__ ((packed)) flags;
+ __u8 descriptor;
+ __u8 dev_class;
+ __u8 reserved;
+ __u8 dev_type[6];
+ __u8 dev_model[3];
+ __u8 HDA_manufacturer[3];
+ __u8 HDA_location[2];
+ __u8 HDA_seqno[12];
+ __u8 ID;
+ __u8 unit_addr;
+} __attribute__ ((packed));
+
+struct dasd_sneq {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 reserved[2];
- unsigned char cont_type[6];
- unsigned char cont_model[3];
- unsigned char cont_manufacturer[3];
- unsigned char cont_location[2];
- unsigned char cont_seqno[12];
- __u16 ID;
- } __attribute__ ((packed)) ned3;
+ __u8 identifier:2;
+ __u8 reserved:6;
+ } __attribute__ ((packed)) flags;
+ __u8 res1;
+ __u16 format;
+ __u8 res2[4]; /* byte 4- 7 */
+ __u8 sua_flags; /* byte 8 */
+ __u8 base_unit_addr; /* byte 9 */
+ __u8 res3[22]; /* byte 10-31 */
+} __attribute__ ((packed));
+
+struct vd_sneq {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char token_id:1;
- unsigned char sno_valid:1;
- unsigned char subst_sno:1;
- unsigned char recNED:1;
- unsigned char emuNED:1;
- unsigned char reserved:1;
- } __attribute__ ((packed)) flags;
- __u8 descriptor;
- __u8 reserved[2];
- unsigned char cont_type[6];
- unsigned char empty[3];
- unsigned char cont_manufacturer[3];
- unsigned char cont_location[2];
- unsigned char cont_seqno[12];
- __u16 ID;
- } __attribute__ ((packed)) ned4;
- unsigned char ned5[32];
- unsigned char ned6[32];
- unsigned char ned7[32];
+ __u8 identifier:2;
+ __u8 reserved:6;
+ } __attribute__ ((packed)) flags;
+ __u8 res1;
+ __u16 format;
+ __u8 res2[4]; /* byte 4- 7 */
+ __u8 uit[16]; /* byte 8-23 */
+ __u8 res3[8]; /* byte 24-31 */
+} __attribute__ ((packed));
+
+struct dasd_gneq {
struct {
- struct {
- unsigned char identifier:2;
- unsigned char reserved:6;
- } __attribute__ ((packed)) flags;
- __u8 selector;
- __u16 interfaceID;
- __u32 reserved;
- __u16 subsystemID;
- struct {
- unsigned char sp0:1;
- unsigned char sp1:1;
- unsigned char reserved:5;
- unsigned char scluster:1;
- } __attribute__ ((packed)) spathID;
- __u8 unit_address;
- __u8 dev_ID;
- __u8 dev_address;
- __u8 adapterID;
- __u16 link_address;
- struct {
- unsigned char parallel:1;
- unsigned char escon:1;
- unsigned char reserved:1;
- unsigned char ficon:1;
- unsigned char reserved2:4;
- } __attribute__ ((packed)) protocol_type;
- struct {
- unsigned char PID_in_236:1;
- unsigned char reserved:7;
- } __attribute__ ((packed)) format_flags;
- __u8 log_dev_address;
- unsigned char reserved2[12];
- } __attribute__ ((packed)) neq;
+ __u8 identifier:2;
+ __u8 reserved:6;
+ } __attribute__ ((packed)) flags;
+ __u8 reserved[7];
+ __u16 subsystemID;
+ __u8 reserved2[22];
} __attribute__ ((packed));
struct dasd_eckd_path {
struct dasd_eckd_private {
struct dasd_eckd_characteristics rdc_data;
- struct dasd_eckd_confdata conf_data;
+ u8 *conf_data;
+ int conf_len;
+ /* pointers to specific parts in the conf_data */
+ struct dasd_ned *ned;
+ struct dasd_sneq *sneq;
+ struct vd_sneq *vdsneq;
+ struct dasd_gneq *gneq;
+
struct dasd_eckd_path path_data;
struct eckd_count count_area[5];
int init_cqr_status;
__u16 ssid;
__u8 real_unit_addr;
__u8 base_unit_addr;
+ char vduit[33];
};
/*
void
sclp_sync_wait(void)
{
+ unsigned long long old_tick;
unsigned long flags;
unsigned long cr0, cr0_sync;
u64 timeout;
if (!irq_context)
local_bh_disable();
/* Enable service-signal interruption, disable timer interrupts */
+ old_tick = local_tick_disable();
trace_hardirqs_on();
__ctl_store(cr0, 0, 0);
cr0_sync = cr0;
+ cr0_sync &= 0xffff00a0;
cr0_sync |= 0x00000200;
- cr0_sync &= 0xFFFFF3AC;
__ctl_load(cr0_sync, 0, 0);
__raw_local_irq_stosm(0x01);
/* Loop until driver state indicates finished request */
__ctl_load(cr0, 0, 0);
if (!irq_context)
_local_bh_enable();
+ local_tick_enable(old_tick);
local_irq_restore(flags);
}
-
EXPORT_SYMBOL(sclp_sync_wait);
/* Dispatch changes in send and receive mask to registered listeners. */
sclp_attach_storage(id);
switch (action) {
case MEM_ONLINE:
+ case MEM_GOING_OFFLINE:
+ case MEM_CANCEL_OFFLINE:
break;
case MEM_GOING_ONLINE:
rc = sclp_mem_change_state(start, size, 1);
case MEM_CANCEL_ONLINE:
sclp_mem_change_state(start, size, 0);
break;
+ case MEM_OFFLINE:
+ sclp_mem_change_state(start, size, 0);
+ break;
default:
rc = -EINVAL;
break;
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/cpu.h>
-#include <linux/kthread.h>
#include <linux/sysdev.h>
#include <linux/workqueue.h>
#include <asm/smp.h>
put_online_cpus();
}
-static int sclp_cpu_kthread(void *data)
-{
- smp_rescan_cpus();
- return 0;
-}
-
static void __ref sclp_cpu_change_notify(struct work_struct *work)
{
- /* Can't call smp_rescan_cpus() from workqueue context since it may
- * deadlock in case of cpu hotplug. So we have to create a kernel
- * thread in order to call it.
- */
- kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan");
+ smp_rescan_cpus();
}
static void sclp_conf_receiver_fn(struct evbuf_header *evbuf)
* Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
-#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <linux/bitops.h>
#include "idset.h"
#include "css.h"
{
struct idset *set;
- set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id),
- GFP_KERNEL);
+ set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id));
if (set) {
set->num_ssid = num_ssid;
set->num_id = num_id;
+ memset(set->bitmap, 0, bitmap_size(num_ssid, num_id));
}
return set;
}
void idset_free(struct idset *set)
{
- kfree(set);
+ vfree(set);
}
void idset_clear(struct idset *set)
goto out_rel;
/* qdr is used in ccw1.cda which is u32 */
- irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
+ irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!irq_ptr->qdr)
goto out_rel;
WARN_ON((unsigned long)irq_ptr->qdr & 0xfff);
return 0;
}
-void __exit qdio_remove_perf_stats(void)
+void qdio_remove_perf_stats(void)
{
#ifdef CONFIG_PROC_FS
remove_proc_entry("qdio_perf", NULL);
kmem_cache_free(qdio_q_cache, q);
}
}
- kfree(irq_ptr->qdr);
+ free_page((unsigned long) irq_ptr->qdr);
free_page(irq_ptr->chsc_page);
free_page((unsigned long) irq_ptr);
}
return 0;
}
-void __exit qdio_setup_exit(void)
+void qdio_setup_exit(void)
{
kmem_cache_destroy(qdio_q_cache);
}
return len;
}
-void s390_virtio_console_init(void)
+void __init s390_virtio_console_init(void)
{
virtio_cons_early_init(early_put_chars);
}
int next_element_to_fill;
struct sk_buff_head skb_list;
struct list_head ctx_list;
+ int is_header[16];
};
struct qeth_card;
/* exports for qeth discipline device drivers */
extern struct qeth_card_list_struct qeth_core_card_list;
-
+extern struct kmem_cache *qeth_core_header_cache;
extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS];
void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int);
int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int);
int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *,
struct sk_buff *, struct qeth_hdr *, int,
- struct qeth_eddp_context *);
+ struct qeth_eddp_context *, int, int);
int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
struct sk_buff *, struct qeth_hdr *,
int, struct qeth_eddp_context *);
#include <linux/mii.h>
#include <linux/kthread.h>
-#include <asm-s390/ebcdic.h>
-#include <asm-s390/io.h>
+#include <asm/ebcdic.h>
+#include <asm/io.h>
#include <asm/s390_rdev.h>
#include "qeth_core.h"
struct qeth_card_list_struct qeth_core_card_list;
EXPORT_SYMBOL_GPL(qeth_core_card_list);
+struct kmem_cache *qeth_core_header_cache;
+EXPORT_SYMBOL_GPL(qeth_core_header_cache);
static struct device *qeth_core_root_dev;
static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY;
}
qeth_eddp_buf_release_contexts(buf);
for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) {
+ if (buf->buffer->element[i].addr && buf->is_header[i])
+ kmem_cache_free(qeth_core_header_cache,
+ buf->buffer->element[i].addr);
+ buf->is_header[i] = 0;
buf->buffer->element[i].length = 0;
buf->buffer->element[i].addr = NULL;
buf->buffer->element[i].flags = 0;
if (skb_shinfo(skb)->nr_frags > 0)
elements_needed = (skb_shinfo(skb)->nr_frags + 1);
if (elements_needed == 0)
- elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
- + skb->len) >> PAGE_SHIFT);
+ elements_needed = 1 + (((((unsigned long) skb->data) %
+ PAGE_SIZE) + skb->len) >> PAGE_SHIFT);
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
EXPORT_SYMBOL_GPL(qeth_get_elements_no);
static inline void __qeth_fill_buffer(struct sk_buff *skb,
- struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill)
+ struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
+ int offset)
{
int length = skb->len;
int length_here;
data = skb->data;
first_lap = (is_tso == 0 ? 1 : 0);
+ if (offset >= 0) {
+ data = skb->data + offset;
+ first_lap = 0;
+ }
+
while (length > 0) {
/* length_here is the remaining amount of data in this page */
length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE);
}
static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue,
- struct qeth_qdio_out_buffer *buf, struct sk_buff *skb)
+ struct qeth_qdio_out_buffer *buf, struct sk_buff *skb,
+ struct qeth_hdr *hdr, int offset, int hd_len)
{
struct qdio_buffer *buffer;
- struct qeth_hdr_tso *hdr;
int flush_cnt = 0, hdr_len, large_send = 0;
buffer = buf->buffer;
atomic_inc(&skb->users);
skb_queue_tail(&buf->skb_list, skb);
- hdr = (struct qeth_hdr_tso *) skb->data;
/*check first on TSO ....*/
- if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) {
+ if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) {
int element = buf->next_element_to_fill;
- hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len;
+ hdr_len = sizeof(struct qeth_hdr_tso) +
+ ((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len;
/*fill first buffer entry only with header information */
buffer->element[element].addr = skb->data;
buffer->element[element].length = hdr_len;
skb->len -= hdr_len;
large_send = 1;
}
+
+ if (offset >= 0) {
+ int element = buf->next_element_to_fill;
+ buffer->element[element].addr = hdr;
+ buffer->element[element].length = sizeof(struct qeth_hdr) +
+ hd_len;
+ buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+ buf->is_header[element] = 1;
+ buf->next_element_to_fill++;
+ }
+
if (skb_shinfo(skb)->nr_frags == 0)
__qeth_fill_buffer(skb, buffer, large_send,
- (int *)&buf->next_element_to_fill);
+ (int *)&buf->next_element_to_fill, offset);
else
__qeth_fill_buffer_frag(skb, buffer, large_send,
(int *)&buf->next_element_to_fill);
int qeth_do_send_packet_fast(struct qeth_card *card,
struct qeth_qdio_out_q *queue, struct sk_buff *skb,
struct qeth_hdr *hdr, int elements_needed,
- struct qeth_eddp_context *ctx)
+ struct qeth_eddp_context *ctx, int offset, int hd_len)
{
struct qeth_qdio_out_buffer *buffer;
int buffers_needed = 0;
}
atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED);
if (ctx == NULL) {
- qeth_fill_buffer(queue, buffer, skb);
+ qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len);
qeth_flush_buffers(queue, index, 1);
} else {
flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index);
}
}
if (ctx == NULL)
- tmp = qeth_fill_buffer(queue, buffer, skb);
+ tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0);
else {
tmp = qeth_eddp_fill_buffer(queue, ctx,
queue->next_buf_to_fill);
rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0;
if (rc)
goto register_err;
- return 0;
+ qeth_core_header_cache = kmem_cache_create("qeth_hdr",
+ sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL);
+ if (!qeth_core_header_cache) {
+ rc = -ENOMEM;
+ goto slab_err;
+ }
+
+ return 0;
+slab_err:
+ s390_root_dev_unregister(qeth_core_root_dev);
register_err:
driver_remove_file(&qeth_core_ccwgroup_driver.driver,
&driver_attr_group);
&driver_attr_group);
ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver);
ccw_driver_unregister(&qeth_ccw_driver);
+ kmem_cache_destroy(qeth_core_header_cache);
qeth_unregister_dbf_views();
PRINT_INFO("core functions removed\n");
}
static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
struct sk_buff *skb, int ipv, int cast_type)
{
- struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) +
- QETH_HEADER_SIZE);
+ struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb);
memset(hdr, 0, sizeof(struct qeth_hdr));
hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2;
int tx_bytes = skb->len;
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
+ int data_offset = -1;
+ int elements_needed = 0;
+ int hd_len = 0;
if ((card->state != CARD_STATE_UP) || !card->lan_online) {
card->stats.tx_carrier_errors++;
if (card->info.type == QETH_CARD_TYPE_OSN)
hdr = (struct qeth_hdr *)skb->data;
else {
- /* create a clone with writeable headroom */
- new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr));
- if (!new_skb)
- goto tx_drop;
- hdr = (struct qeth_hdr *)skb_push(new_skb,
+ if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+ (skb_shinfo(skb)->nr_frags == 0)) {
+ new_skb = skb;
+ data_offset = ETH_HLEN;
+ hd_len = ETH_HLEN;
+ hdr = kmem_cache_alloc(qeth_core_header_cache,
+ GFP_ATOMIC);
+ if (!hdr)
+ goto tx_drop;
+ elements_needed++;
+ skb_reset_mac_header(new_skb);
+ qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+ hdr->hdr.l2.pkt_length = new_skb->len;
+ memcpy(((char *)hdr) + sizeof(struct qeth_hdr),
+ skb_mac_header(new_skb), ETH_HLEN);
+ } else {
+ /* create a clone with writeable headroom */
+ new_skb = skb_realloc_headroom(skb,
+ sizeof(struct qeth_hdr));
+ if (!new_skb)
+ goto tx_drop;
+ hdr = (struct qeth_hdr *)skb_push(new_skb,
sizeof(struct qeth_hdr));
- qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+ skb_set_mac_header(new_skb, sizeof(struct qeth_hdr));
+ qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type);
+ }
}
if (large_send == QETH_LARGE_SEND_EDDP) {
goto tx_drop;
}
} else {
- elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0);
- if (!elements)
+ elements = qeth_get_elements_no(card, (void *)hdr, new_skb,
+ elements_needed);
+ if (!elements) {
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
goto tx_drop;
+ }
}
if ((large_send == QETH_LARGE_SEND_NO) &&
elements, ctx);
else
rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
- elements, ctx);
+ elements, ctx, data_offset, hd_len);
if (!rc) {
card->stats.tx_packets++;
card->stats.tx_bytes += tx_bytes;
if (ctx != NULL)
qeth_eddp_put_context(ctx);
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
+
if (rc == -EBUSY) {
if (new_skb != skb)
dev_kfree_skb_any(new_skb);
int tx_bytes = skb->len;
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
+ int data_offset = -1;
if ((card->info.type == QETH_CARD_TYPE_IQD) &&
(skb->protocol != htons(ETH_P_IPV6)) &&
card->perf_stats.outbound_start_time = qeth_get_micros();
}
- /* create a clone with writeable headroom */
- new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) +
- VLAN_HLEN);
- if (!new_skb)
- goto tx_drop;
+ if (skb_is_gso(skb))
+ large_send = card->options.large_send;
+
+ if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) &&
+ (skb_shinfo(skb)->nr_frags == 0)) {
+ new_skb = skb;
+ data_offset = ETH_HLEN;
+ hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC);
+ if (!hdr)
+ goto tx_drop;
+ elements_needed++;
+ } else {
+ /* create a clone with writeable headroom */
+ new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso)
+ + VLAN_HLEN);
+ if (!new_skb)
+ goto tx_drop;
+ }
if (card->info.type == QETH_CARD_TYPE_IQD) {
- skb_pull(new_skb, ETH_HLEN);
+ if (data_offset < 0)
+ skb_pull(new_skb, ETH_HLEN);
} else {
if (new_skb->protocol == htons(ETH_P_IP)) {
if (card->dev->type == ARPHRD_IEEE802_TR)
netif_stop_queue(dev);
- if (skb_is_gso(new_skb))
- large_send = card->options.large_send;
-
/* fix hardware limitation: as long as we do not have sbal
* chaining we can not send long frag lists so we temporary
* switch to EDDP
qeth_tso_fill_header(card, hdr, new_skb);
elements_needed++;
} else {
- hdr = (struct qeth_hdr *)skb_push(new_skb,
+ if (data_offset < 0) {
+ hdr = (struct qeth_hdr *)skb_push(new_skb,
sizeof(struct qeth_hdr));
- qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type);
+ qeth_l3_fill_header(card, hdr, new_skb, ipv,
+ cast_type);
+ } else {
+ qeth_l3_fill_header(card, hdr, new_skb, ipv,
+ cast_type);
+ hdr->hdr.l3.length = new_skb->len - data_offset;
+ }
}
if (large_send == QETH_LARGE_SEND_EDDP) {
} else {
int elems = qeth_get_elements_no(card, (void *)hdr, new_skb,
elements_needed);
- if (!elems)
+ if (!elems) {
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
goto tx_drop;
+ }
elements_needed += elems;
}
elements_needed, ctx);
else
rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr,
- elements_needed, ctx);
+ elements_needed, ctx, data_offset, 0);
if (!rc) {
card->stats.tx_packets++;
if (ctx != NULL)
qeth_eddp_put_context(ctx);
+ if (data_offset >= 0)
+ kmem_cache_free(qeth_core_header_cache, hdr);
+
if (rc == -EBUSY) {
if (new_skb != skb)
dev_kfree_skb_any(new_skb);
SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
+SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
-#if defined(CONFIG_CPU_SUBTYPE_SH7763)
-/* SH7763 SCIF2 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
SCIF_FNS(SCFDR, 0, 0, 0x1C, 16)
SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16)
-SCIF_FNS(SCLSR2, 0, 0, 0x24, 16)
-#endif /* CONFIG_CPU_SUBTYPE_SH7763 */
+SCIF_FNS(SCLSR2, 0, 0, 0x24, 16)
+SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
+SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
+SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#else
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#include <linux/slab.h>
#include <linux/maple.h>
#include <linux/dma-mapping.h>
+#include <linux/delay.h>
#include <asm/cacheflush.h>
#include <asm/dma.h>
#include <asm/io.h>
-#include <asm/mach/dma.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/maple.h>
-#include <linux/delay.h>
+#include <mach/dma.h>
+#include <mach/sysasic.h>
MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin");
MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
static LIST_HEAD(maple_waitq);
static LIST_HEAD(maple_sentq);
-static DEFINE_MUTEX(maple_list_lock);
+/* mutex to protect queue of waiting packets */
+static DEFINE_MUTEX(maple_wlist_lock);
static struct maple_driver maple_dummy_driver;
static struct device maple_bus;
static int subdevice_map[MAPLE_PORTS];
static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
static unsigned long maple_pnp_time;
-static int started, scanning, liststatus, fullscan;
+static int started, scanning, fullscan;
static struct kmem_cache *maple_queue_cache;
struct maple_device_specify {
kfree(mdev);
}
-/**
+/*
* maple_add_packet - add a single instruction to the queue
- * @mq: instruction to add to waiting queue
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
*/
-void maple_add_packet(struct mapleq *mq)
+int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
+ size_t length, void *data)
{
- mutex_lock(&maple_list_lock);
- list_add(&mq->list, &maple_waitq);
- mutex_unlock(&maple_list_lock);
+ int locking, ret = 0;
+ void *sendbuf = NULL;
+
+ mutex_lock(&maple_wlist_lock);
+ /* bounce if device already locked */
+ locking = mutex_is_locked(&mdev->mq->mutex);
+ if (locking) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ mutex_lock(&mdev->mq->mutex);
+
+ if (length) {
+ sendbuf = kmalloc(length * 4, GFP_KERNEL);
+ if (!sendbuf) {
+ mutex_unlock(&mdev->mq->mutex);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+ }
+
+ mdev->mq->command = command;
+ mdev->mq->length = length;
+ if (length > 1)
+ memcpy(sendbuf + 4, data, (length - 1) * 4);
+ mdev->mq->sendbuf = sendbuf;
+
+ list_add(&mdev->mq->list, &maple_waitq);
+out:
+ mutex_unlock(&maple_wlist_lock);
+ return ret;
}
EXPORT_SYMBOL_GPL(maple_add_packet);
+/*
+ * maple_add_packet_sleeps - add a single instruction to the queue
+ * - waits for lock to be free
+ * @mdev - maple device
+ * @function - function on device being queried
+ * @command - maple command to add
+ * @length - length of command string (in 32 bit words)
+ * @data - remainder of command string
+ */
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+ u32 command, size_t length, void *data)
+{
+ int locking, ret = 0;
+ void *sendbuf = NULL;
+
+ locking = mutex_lock_interruptible(&mdev->mq->mutex);
+ if (locking) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (length) {
+ sendbuf = kmalloc(length * 4, GFP_KERNEL);
+ if (!sendbuf) {
+ mutex_unlock(&mdev->mq->mutex);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
+ }
+
+ mdev->mq->command = command;
+ mdev->mq->length = length;
+ if (length > 1)
+ memcpy(sendbuf + 4, data, (length - 1) * 4);
+ mdev->mq->sendbuf = sendbuf;
+
+ mutex_lock(&maple_wlist_lock);
+ list_add(&mdev->mq->list, &maple_waitq);
+ mutex_unlock(&maple_wlist_lock);
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(maple_add_packet_sleeps);
+
static struct mapleq *maple_allocq(struct maple_device *mdev)
{
struct mapleq *mq;
mq = kmalloc(sizeof(*mq), GFP_KERNEL);
if (!mq)
- return NULL;
+ goto failed_nomem;
mq->dev = mdev;
mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
- if (!mq->recvbuf) {
- kfree(mq);
- return NULL;
- }
+ if (!mq->recvbuf)
+ goto failed_p2;
+ /*
+ * most devices do not need the mutex - but
+ * anything that injects block reads or writes
+ * will rely on it
+ */
+ mutex_init(&mq->mutex);
return mq;
+
+failed_p2:
+ kfree(mq);
+failed_nomem:
+ return NULL;
}
static struct maple_device *maple_alloc_dev(int port, int unit)
}
mdev->dev.bus = &maple_bus_type;
mdev->dev.parent = &maple_bus;
- mdev->function = 0;
return mdev;
}
*maple_sendptr++ = PHYSADDR(mq->recvbuf);
*maple_sendptr++ =
mq->command | (to << 8) | (from << 16) | (len << 24);
-
while (len-- > 0)
*maple_sendptr++ = *lsendbuf++;
}
/* build up command queue */
static void maple_send(void)
{
- int i;
- int maple_packets;
+ int i, maple_packets = 0;
struct mapleq *mq, *nmq;
if (!list_empty(&maple_sentq))
return;
- if (list_empty(&maple_waitq) || !maple_dma_done())
+ mutex_lock(&maple_wlist_lock);
+ if (list_empty(&maple_waitq) || !maple_dma_done()) {
+ mutex_unlock(&maple_wlist_lock);
return;
- maple_packets = 0;
- maple_sendptr = maple_lastptr = maple_sendbuf;
+ }
+ mutex_unlock(&maple_wlist_lock);
+ maple_lastptr = maple_sendbuf;
+ maple_sendptr = maple_sendbuf;
+ mutex_lock(&maple_wlist_lock);
list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
maple_build_block(mq);
list_move(&mq->list, &maple_sentq);
if (maple_packets++ > MAPLE_MAXPACKETS)
break;
}
+ mutex_unlock(&maple_wlist_lock);
if (maple_packets > 0) {
for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++)
dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
}
}
-static int attach_matching_maple_driver(struct device_driver *driver,
+/* check if there is a driver registered likely to match this device */
+static int check_matching_maple_driver(struct device_driver *driver,
void *devptr)
{
struct maple_driver *maple_drv;
mdev = devptr;
maple_drv = to_maple_driver(driver);
- if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) {
- if (maple_drv->connect(mdev) == 0) {
- mdev->driver = maple_drv;
- return 1;
- }
- }
+ if (mdev->devinfo.function & cpu_to_be32(maple_drv->function))
+ return 1;
return 0;
}
{
if (!mdev)
return;
- if (mdev->driver) {
- if (mdev->driver->disconnect)
- mdev->driver->disconnect(mdev);
- }
- mdev->driver = NULL;
device_unregister(&mdev->dev);
mdev = NULL;
}
mdev->port, mdev->unit, function);
matched =
- bus_for_each_drv(&maple_bus_type, NULL, mdev,
- attach_matching_maple_driver);
+ bus_for_each_drv(&maple_bus_type, NULL, mdev,
+ check_matching_maple_driver);
if (matched == 0) {
/* Driver does not exist yet */
static int setup_maple_commands(struct device *device, void *ignored)
{
+ int add;
struct maple_device *maple_dev = to_maple_dev(device);
if ((maple_dev->interval > 0)
&& time_after(jiffies, maple_dev->when)) {
- maple_dev->when = jiffies + maple_dev->interval;
- maple_dev->mq->command = MAPLE_COMMAND_GETCOND;
- maple_dev->mq->sendbuf = &maple_dev->function;
- maple_dev->mq->length = 1;
- maple_add_packet(maple_dev->mq);
- liststatus++;
+ /* bounce if we cannot lock */
+ add = maple_add_packet(maple_dev,
+ be32_to_cpu(maple_dev->devinfo.function),
+ MAPLE_COMMAND_GETCOND, 1, NULL);
+ if (!add)
+ maple_dev->when = jiffies + maple_dev->interval;
} else {
- if (time_after(jiffies, maple_pnp_time)) {
- maple_dev->mq->command = MAPLE_COMMAND_DEVINFO;
- maple_dev->mq->length = 0;
- maple_add_packet(maple_dev->mq);
- liststatus++;
- }
+ if (time_after(jiffies, maple_pnp_time))
+ /* This will also bounce */
+ maple_add_packet(maple_dev, 0,
+ MAPLE_COMMAND_DEVINFO, 0, NULL);
}
-
return 0;
}
/* VBLANK bottom half - implemented via workqueue */
static void maple_vblank_handler(struct work_struct *work)
{
- if (!maple_dma_done())
- return;
- if (!list_empty(&maple_sentq))
+ if (!list_empty(&maple_sentq) || !maple_dma_done())
return;
+
ctrl_outl(0, MAPLE_ENABLE);
- liststatus = 0;
+
bus_for_each_dev(&maple_bus_type, NULL, NULL,
setup_maple_commands);
+
if (time_after(jiffies, maple_pnp_time))
maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
- if (liststatus && list_empty(&maple_sentq)) {
- INIT_LIST_HEAD(&maple_sentq);
+
+ mutex_lock(&maple_wlist_lock);
+ if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) {
+ mutex_unlock(&maple_wlist_lock);
maple_send();
+ } else {
+ mutex_unlock(&maple_wlist_lock);
}
+
maplebus_dma_reset();
}
struct maple_device *mdev_add;
struct maple_device_specify ds;
+ ds.port = mdev->port;
for (k = 0; k < 5; k++) {
- ds.port = mdev->port;
ds.unit = k + 1;
retval =
bus_for_each_dev(&maple_bus_type, NULL, &ds,
mdev_add = maple_alloc_dev(mdev->port, k + 1);
if (!mdev_add)
return;
- mdev_add->mq->command = MAPLE_COMMAND_DEVINFO;
- mdev_add->mq->length = 0;
- maple_add_packet(mdev_add->mq);
+ maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
+ 0, NULL);
+ /* mark that we are checking sub devices */
scanning = 1;
}
submask = submask >> 1;
}
}
+static void maple_port_rescan(void)
+{
+ int i;
+ struct maple_device *mdev;
+
+ fullscan = 1;
+ for (i = 0; i < MAPLE_PORTS; i++) {
+ if (checked[i] == false) {
+ fullscan = 0;
+ mdev = baseunits[i];
+ /*
+ * test lock in case scan has failed
+ * but device is still locked
+ */
+ if (mutex_is_locked(&mdev->mq->mutex))
+ mutex_unlock(&mdev->mq->mutex);
+ maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
+ 0, NULL);
+ }
+ }
+}
+
/* maple dma end bottom half - implemented via workqueue */
static void maple_dma_handler(struct work_struct *work)
{
struct maple_device *dev;
char *recvbuf;
enum maple_code code;
- int i;
if (!maple_dma_done())
return;
recvbuf = mq->recvbuf;
code = recvbuf[0];
dev = mq->dev;
+ kfree(mq->sendbuf);
+ mutex_unlock(&mq->mutex);
+ list_del_init(&mq->list);
+
switch (code) {
case MAPLE_RESPONSE_NONE:
maple_response_none(dev, mq);
break;
}
}
- INIT_LIST_HEAD(&maple_sentq);
+ /* if scanning is 1 then we have subdevices to check */
if (scanning == 1) {
maple_send();
scanning = 2;
} else
scanning = 0;
-
- if (!fullscan) {
- fullscan = 1;
- for (i = 0; i < MAPLE_PORTS; i++) {
- if (checked[i] == false) {
- fullscan = 0;
- dev = baseunits[i];
- dev->mq->command =
- MAPLE_COMMAND_DEVINFO;
- dev->mq->length = 0;
- maple_add_packet(dev->mq);
- }
- }
- }
+ /*check if we have actually tested all ports yet */
+ if (!fullscan)
+ maple_port_rescan();
+ /* mark that we have been through the first scan */
if (started == 0)
started = 1;
}
if (maple_dev->devinfo.function == 0xFFFFFFFF)
return 0;
else if (maple_dev->devinfo.function &
- be32_to_cpu(maple_drv->function))
+ cpu_to_be32(maple_drv->function))
return 1;
return 0;
}
if (!maple_queue_cache)
goto cleanup_bothirqs;
+ INIT_LIST_HEAD(&maple_waitq);
+ INIT_LIST_HEAD(&maple_sentq);
+
/* setup maple ports */
for (i = 0; i < MAPLE_PORTS; i++) {
checked[i] = false;
maple_free_dev(mdev[i]);
goto cleanup_cache;
}
- mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO;
- mdev[i]->mq->length = 0;
- maple_add_packet(mdev[i]->mq);
+ maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
subdevice_map[i] = 0;
}
obj-$(CONFIG_FB_SM501) += sm501fb.o
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_SH7343VOU) += sh7343_voufb.o
obj-$(CONFIG_FB_OMAP) += omap/
obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
obj-$(CONFIG_FB_CARMINE) += carminefb.o
#include <linux/fb.h>
#include <linux/backlight.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#include <asm/hp6xx.h>
#include <asm/hd64461.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <asm/hd64461.h>
-#include <asm/cpu/dac.h>
+#include <cpu/dac.h>
#define WIDTH 640
#ifdef CONFIG_SH_DREAMCAST
#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
+#include <mach-dreamcast/mach/sysasic.h>
#endif
#ifdef CONFIG_SH_DMA
#include <linux/pagemap.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
#include <asm/dma.h>
#endif
#ifdef CONFIG_SH_STORE_QUEUES
#include <linux/uaccess.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
#endif
#ifndef PCI_DEVICE_ID_NEC_NEON250
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC 37
-#define REG_FP 72
-#define REG_SP 29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS 90
-
-#define GDB_FR_REG0 (PTRSIZE*6) /* 0 */
-#define GDB_FR_REG1 ((GDB_FR_REG0) + LONGSIZE) /* 1 */
-#define GDB_FR_REG2 ((GDB_FR_REG1) + LONGSIZE) /* 2 */
-#define GDB_FR_REG3 ((GDB_FR_REG2) + LONGSIZE) /* 3 */
-#define GDB_FR_REG4 ((GDB_FR_REG3) + LONGSIZE) /* 4 */
-#define GDB_FR_REG5 ((GDB_FR_REG4) + LONGSIZE) /* 5 */
-#define GDB_FR_REG6 ((GDB_FR_REG5) + LONGSIZE) /* 6 */
-#define GDB_FR_REG7 ((GDB_FR_REG6) + LONGSIZE) /* 7 */
-#define GDB_FR_REG8 ((GDB_FR_REG7) + LONGSIZE) /* 8 */
-#define GDB_FR_REG9 ((GDB_FR_REG8) + LONGSIZE) /* 9 */
-#define GDB_FR_REG10 ((GDB_FR_REG9) + LONGSIZE) /* 10 */
-#define GDB_FR_REG11 ((GDB_FR_REG10) + LONGSIZE) /* 11 */
-#define GDB_FR_REG12 ((GDB_FR_REG11) + LONGSIZE) /* 12 */
-#define GDB_FR_REG13 ((GDB_FR_REG12) + LONGSIZE) /* 13 */
-#define GDB_FR_REG14 ((GDB_FR_REG13) + LONGSIZE) /* 14 */
-#define GDB_FR_REG15 ((GDB_FR_REG14) + LONGSIZE) /* 15 */
-#define GDB_FR_REG16 ((GDB_FR_REG15) + LONGSIZE) /* 16 */
-#define GDB_FR_REG17 ((GDB_FR_REG16) + LONGSIZE) /* 17 */
-#define GDB_FR_REG18 ((GDB_FR_REG17) + LONGSIZE) /* 18 */
-#define GDB_FR_REG19 ((GDB_FR_REG18) + LONGSIZE) /* 19 */
-#define GDB_FR_REG20 ((GDB_FR_REG19) + LONGSIZE) /* 20 */
-#define GDB_FR_REG21 ((GDB_FR_REG20) + LONGSIZE) /* 21 */
-#define GDB_FR_REG22 ((GDB_FR_REG21) + LONGSIZE) /* 22 */
-#define GDB_FR_REG23 ((GDB_FR_REG22) + LONGSIZE) /* 23 */
-#define GDB_FR_REG24 ((GDB_FR_REG23) + LONGSIZE) /* 24 */
-#define GDB_FR_REG25 ((GDB_FR_REG24) + LONGSIZE) /* 25 */
-#define GDB_FR_REG26 ((GDB_FR_REG25) + LONGSIZE) /* 26 */
-#define GDB_FR_REG27 ((GDB_FR_REG26) + LONGSIZE) /* 27 */
-#define GDB_FR_REG28 ((GDB_FR_REG27) + LONGSIZE) /* 28 */
-#define GDB_FR_REG29 ((GDB_FR_REG28) + LONGSIZE) /* 29 */
-#define GDB_FR_REG30 ((GDB_FR_REG29) + LONGSIZE) /* 30 */
-#define GDB_FR_REG31 ((GDB_FR_REG30) + LONGSIZE) /* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS ((GDB_FR_REG31) + LONGSIZE) /* 32 */
-#define GDB_FR_LO ((GDB_FR_STATUS) + LONGSIZE) /* 33 */
-#define GDB_FR_HI ((GDB_FR_LO) + LONGSIZE) /* 34 */
-#define GDB_FR_BADVADDR ((GDB_FR_HI) + LONGSIZE) /* 35 */
-#define GDB_FR_CAUSE ((GDB_FR_BADVADDR) + LONGSIZE) /* 36 */
-#define GDB_FR_EPC ((GDB_FR_CAUSE) + LONGSIZE) /* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0 ((GDB_FR_EPC) + LONGSIZE) /* 38 */
-#define GDB_FR_FPR1 ((GDB_FR_FPR0) + LONGSIZE) /* 39 */
-#define GDB_FR_FPR2 ((GDB_FR_FPR1) + LONGSIZE) /* 40 */
-#define GDB_FR_FPR3 ((GDB_FR_FPR2) + LONGSIZE) /* 41 */
-#define GDB_FR_FPR4 ((GDB_FR_FPR3) + LONGSIZE) /* 42 */
-#define GDB_FR_FPR5 ((GDB_FR_FPR4) + LONGSIZE) /* 43 */
-#define GDB_FR_FPR6 ((GDB_FR_FPR5) + LONGSIZE) /* 44 */
-#define GDB_FR_FPR7 ((GDB_FR_FPR6) + LONGSIZE) /* 45 */
-#define GDB_FR_FPR8 ((GDB_FR_FPR7) + LONGSIZE) /* 46 */
-#define GDB_FR_FPR9 ((GDB_FR_FPR8) + LONGSIZE) /* 47 */
-#define GDB_FR_FPR10 ((GDB_FR_FPR9) + LONGSIZE) /* 48 */
-#define GDB_FR_FPR11 ((GDB_FR_FPR10) + LONGSIZE) /* 49 */
-#define GDB_FR_FPR12 ((GDB_FR_FPR11) + LONGSIZE) /* 50 */
-#define GDB_FR_FPR13 ((GDB_FR_FPR12) + LONGSIZE) /* 51 */
-#define GDB_FR_FPR14 ((GDB_FR_FPR13) + LONGSIZE) /* 52 */
-#define GDB_FR_FPR15 ((GDB_FR_FPR14) + LONGSIZE) /* 53 */
-#define GDB_FR_FPR16 ((GDB_FR_FPR15) + LONGSIZE) /* 54 */
-#define GDB_FR_FPR17 ((GDB_FR_FPR16) + LONGSIZE) /* 55 */
-#define GDB_FR_FPR18 ((GDB_FR_FPR17) + LONGSIZE) /* 56 */
-#define GDB_FR_FPR19 ((GDB_FR_FPR18) + LONGSIZE) /* 57 */
-#define GDB_FR_FPR20 ((GDB_FR_FPR19) + LONGSIZE) /* 58 */
-#define GDB_FR_FPR21 ((GDB_FR_FPR20) + LONGSIZE) /* 59 */
-#define GDB_FR_FPR22 ((GDB_FR_FPR21) + LONGSIZE) /* 60 */
-#define GDB_FR_FPR23 ((GDB_FR_FPR22) + LONGSIZE) /* 61 */
-#define GDB_FR_FPR24 ((GDB_FR_FPR23) + LONGSIZE) /* 62 */
-#define GDB_FR_FPR25 ((GDB_FR_FPR24) + LONGSIZE) /* 63 */
-#define GDB_FR_FPR26 ((GDB_FR_FPR25) + LONGSIZE) /* 64 */
-#define GDB_FR_FPR27 ((GDB_FR_FPR26) + LONGSIZE) /* 65 */
-#define GDB_FR_FPR28 ((GDB_FR_FPR27) + LONGSIZE) /* 66 */
-#define GDB_FR_FPR29 ((GDB_FR_FPR28) + LONGSIZE) /* 67 */
-#define GDB_FR_FPR30 ((GDB_FR_FPR29) + LONGSIZE) /* 68 */
-#define GDB_FR_FPR31 ((GDB_FR_FPR30) + LONGSIZE) /* 69 */
-
-#define GDB_FR_FSR ((GDB_FR_FPR31) + LONGSIZE) /* 70 */
-#define GDB_FR_FIR ((GDB_FR_FSR) + LONGSIZE) /* 71 */
-#define GDB_FR_FRP ((GDB_FR_FIR) + LONGSIZE) /* 72 */
-
-#define GDB_FR_DUMMY ((GDB_FR_FRP) + LONGSIZE) /* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX ((GDB_FR_DUMMY) + LONGSIZE) /* 74 */
-#define GDB_FR_CP0_RANDOM ((GDB_FR_CP0_INDEX) + LONGSIZE) /* 75 */
-#define GDB_FR_CP0_ENTRYLO0 ((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1 ((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT ((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK ((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED ((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7 ((GDB_FR_CP0_WIRED) + LONGSIZE) /* 81 */
-#define GDB_FR_CP0_REG8 ((GDB_FR_CP0_REG7) + LONGSIZE) /* 82 */
-#define GDB_FR_CP0_REG9 ((GDB_FR_CP0_REG8) + LONGSIZE) /* 83 */
-#define GDB_FR_CP0_ENTRYHI ((GDB_FR_CP0_REG9) + LONGSIZE) /* 84 */
-#define GDB_FR_CP0_REG11 ((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12 ((GDB_FR_CP0_REG11) + LONGSIZE) /* 86 */
-#define GDB_FR_CP0_REG13 ((GDB_FR_CP0_REG12) + LONGSIZE) /* 87 */
-#define GDB_FR_CP0_REG14 ((GDB_FR_CP0_REG13) + LONGSIZE) /* 88 */
-#define GDB_FR_CP0_PRID ((GDB_FR_CP0_REG14) + LONGSIZE) /* 89 */
-
-#define GDB_FR_SIZE ((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
- /*
- * Pad bytes for argument save space on the stack
- * 24/48 Bytes for 32/64 bit code
- */
- unsigned long pad0[6];
-
- /*
- * saved main processor registers
- */
- long reg0, reg1, reg2, reg3, reg4, reg5, reg6, reg7;
- long reg8, reg9, reg10, reg11, reg12, reg13, reg14, reg15;
- long reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
- long reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
- /*
- * Saved special registers
- */
- long cp0_status;
- long lo;
- long hi;
- long cp0_badvaddr;
- long cp0_cause;
- long cp0_epc;
-
- /*
- * Saved floating point registers
- */
- long fpr0, fpr1, fpr2, fpr3, fpr4, fpr5, fpr6, fpr7;
- long fpr8, fpr9, fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
- long fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
- long fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
- long cp1_fsr;
- long cp1_fir;
-
- /*
- * Frame pointer
- */
- long frame_ptr;
- long dummy; /* unused */
-
- /*
- * saved cp0 registers
- */
- long cp0_index;
- long cp0_random;
- long cp0_entrylo0;
- long cp0_entrylo1;
- long cp0_context;
- long cp0_pagemask;
- long cp0_wired;
- long cp0_reg7;
- long cp0_reg8;
- long cp0_reg9;
- long cp0_entryhi;
- long cp0_reg11;
- long cp0_reg12;
- long cp0_reg13;
- long cp0_reg14;
- long cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+ DIE_OOPS = 1,
+ DIE_FP,
+ DIE_TRAP,
+ DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */
--- /dev/null
+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+ (_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX 2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES (90*sizeof(u32))
+#define NUMCRITREGBYTES (12*sizeof(u32))
+#else
+#define NUMREGBYTES (90*sizeof(u64))
+#define NUMCRITREGBYTES (12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE 4
+#define CACHE_FLUSH_IS_SAFE 0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */
extern int pci_probe_only;
+extern char * (*pcibios_plat_setup)(char *str);
+
#endif /* _ASM_PCI_H */
extern int (*txx9_irq_dispatch)(int pending);
void prom_init_cmdline(void);
char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+ unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
#endif /* __ASM_TXX9_GENERIC_H */
/* Clocks */
#define JMR3927_CORECLK 132710400 /* 132.7MHz */
-#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */
-#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */
/*
* TX3927 Pin Configuration:
};
extern enum txx9_pci_err_action txx9_pci_err_action;
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
#endif /* __ASM_TXX9_PCI_H */
#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa
#define SMSC_FDC37M81X_CHIP_ID 0x4d
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
void smsc_fdc37m81x_config_beg(void);
#ifndef __ASM_TXX9_TX3927_H
#define __ASM_TXX9_TX3927_H
-#include <asm/txx9/txx927.h>
-
#define TX3927_REG_BASE 0xfffe0000UL
+#define TX3927_REG_SIZE 0x00010000
#define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000)
#define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000)
#define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000)
/* see PCI_STATUS_XXX in linux/pci.h */
#define PCI_STATUS_NEW_CAP 0x0010
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL 0x00001600
+
/* bits for TC */
#define TX3927_PCIC_TC_OF16E 0x00000020
#define TX3927_PCIC_TC_IF8E 0x00000010
#define TX3927_PCIC_TC_OF8E 0x00000008
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL 0x0003ffff
+
/* bits for IOBA/MBA */
/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG)
#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
+#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch) \
+ (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
- unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+ unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
#endif /* __ASM_TXX9_TX3927_H */
}
unsigned int tx4927_get_mem_size(void);
-void tx4927_wdr_init(void);
+void tx4927_wdt_init(void);
void tx4927_setup(void);
void tx4927_time_init(unsigned int tmrnr);
-void tx4927_setup_serial(void);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
int tx4927_report_pciclk(void);
int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
void tx4927_irq_init(void);
#endif /* __ASM_TXX9_TX4927_H */
#define __ASM_TXX9_TX4927PCIC_H
#include <linux/pci.h>
+#include <linux/irqreturn.h>
struct tx4927_pcic_reg {
u32 pciid;
struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
- struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+ struct pci_controller *channel, int extarb);
void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
#endif /* __ASM_TXX9_TX4927PCIC_H */
#define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch)
#define tx4938_get_mem_size() tx4927_get_mem_size()
-void tx4938_wdr_init(void);
+void tx4938_wdt_init(void);
void tx4938_setup(void);
void tx4938_time_init(unsigned int tmrnr);
-void tx4938_setup_serial(void);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
int tx4938_report_pciclk(void);
void tx4938_report_pci1clk(void);
int tx4938_pciclk66_setup(void);
struct pci_dev;
int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
void tx4938_irq_init(void);
#endif
+++ /dev/null
-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
- volatile unsigned long lcr;
- volatile unsigned long dicr;
- volatile unsigned long disr;
- volatile unsigned long cisr;
- volatile unsigned long fcr;
- volatile unsigned long flcr;
- volatile unsigned long bgr;
- volatile unsigned long tfifo;
- volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK 0x00000060
-#define TXx927_SILCR_SCS_IMCLK 0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG 0x00000020
-#define TXx927_SILCR_SCS_SCLK 0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG 0x00000060
-#define TXx927_SILCR_UEPS 0x00000010
-#define TXx927_SILCR_UPEN 0x00000008
-#define TXx927_SILCR_USBL_MASK 0x00000004
-#define TXx927_SILCR_USBL_1BIT 0x00000004
-#define TXx927_SILCR_USBL_2BIT 0x00000000
-#define TXx927_SILCR_UMODE_MASK 0x00000003
-#define TXx927_SILCR_UMODE_8BIT 0x00000000
-#define TXx927_SILCR_UMODE_7BIT 0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE 0x00008000
-#define TXx927_SIDICR_RDE 0x00004000
-#define TXx927_SIDICR_TIE 0x00002000
-#define TXx927_SIDICR_RIE 0x00001000
-#define TXx927_SIDICR_SPIE 0x00000800
-#define TXx927_SIDICR_CTSAC 0x00000600
-#define TXx927_SIDICR_STIE_MASK 0x0000003f
-#define TXx927_SIDICR_STIE_OERS 0x00000020
-#define TXx927_SIDICR_STIE_CTSS 0x00000010
-#define TXx927_SIDICR_STIE_RBRKD 0x00000008
-#define TXx927_SIDICR_STIE_TRDY 0x00000004
-#define TXx927_SIDICR_STIE_TXALS 0x00000002
-#define TXx927_SIDICR_STIE_UBRKD 0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK 0x00008000
-#define TXx927_SIDISR_UVALID 0x00004000
-#define TXx927_SIDISR_UFER 0x00002000
-#define TXx927_SIDISR_UPER 0x00001000
-#define TXx927_SIDISR_UOER 0x00000800
-#define TXx927_SIDISR_ERI 0x00000400
-#define TXx927_SIDISR_TOUT 0x00000200
-#define TXx927_SIDISR_TDIS 0x00000100
-#define TXx927_SIDISR_RDIS 0x00000080
-#define TXx927_SIDISR_STIS 0x00000040
-#define TXx927_SIDISR_RFDN_MASK 0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS 0x00000020
-#define TXx927_SICISR_CTSS 0x00000010
-#define TXx927_SICISR_RBRKD 0x00000008
-#define TXx927_SICISR_TRDY 0x00000004
-#define TXx927_SICISR_TXALS 0x00000002
-#define TXx927_SICISR_UBRKD 0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST 0x00008000
-#define TXx927_SIFCR_RDIL_MASK 0x00000180
-#define TXx927_SIFCR_RDIL_1 0x00000000
-#define TXx927_SIFCR_RDIL_4 0x00000080
-#define TXx927_SIFCR_RDIL_8 0x00000100
-#define TXx927_SIFCR_RDIL_12 0x00000180
-#define TXx927_SIFCR_RDIL_MAX 0x00000180
-#define TXx927_SIFCR_TDIL_MASK 0x00000018
-#define TXx927_SIFCR_TDIL_MASK 0x00000018
-#define TXx927_SIFCR_TDIL_1 0x00000000
-#define TXx927_SIFCR_TDIL_4 0x00000001
-#define TXx927_SIFCR_TDIL_8 0x00000010
-#define TXx927_SIFCR_TDIL_MAX 0x00000010
-#define TXx927_SIFCR_TFRST 0x00000004
-#define TXx927_SIFCR_RFRST 0x00000002
-#define TXx927_SIFCR_FRSTE 0x00000001
-#define TXx927_SIO_TX_FIFO 8
-#define TXx927_SIO_RX_FIFO 16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS 0x00001000
-#define TXx927_SIFLCR_TES 0x00000800
-#define TXx927_SIFLCR_RTSSC 0x00000200
-#define TXx927_SIFLCR_RSDE 0x00000100
-#define TXx927_SIFLCR_TSDE 0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK 0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e
-#define TXx927_SIFLCR_TBRK 0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK 0x00000300
-#define TXx927_SIBGR_BCLK_T0 0x00000000
-#define TXx927_SIBGR_BCLK_T2 0x00000100
-#define TXx927_SIBGR_BCLK_T4 0x00000200
-#define TXx927_SIBGR_BCLK_T6 0x00000300
-#define TXx927_SIBGR_BRD_MASK 0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */
#ifdef CONFIG_IRQ_CPU
#define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
#else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16)
+#else
#define TXX9_IRQ_BASE 0
#endif
+#endif
#ifdef CONFIG_CPU_TX39XX
#define TXx9_MAX_IR 16
void clock_comparator_work(void);
+static inline unsigned long long local_tick_disable(void)
+{
+ unsigned long long old;
+
+ old = S390_lowcore.clock_comparator;
+ S390_lowcore.clock_comparator = -1ULL;
+ return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+ S390_lowcore.clock_comparator = comp;
+}
+
#endif /* __ASM_HARDIRQ_H */
};
enum diag308_rc {
- DIAG308_RC_OK = 1,
+ DIAG308_RC_OK = 0x0001,
+ DIAG308_RC_NOCONFIG = 0x0102,
};
extern int diag308(unsigned long subcode, void *addr);
} __attribute__ ((packed, aligned(4)));
#ifdef __KERNEL__
+#include <linux/string.h>
/* Helper function for sane state of pre-allocated subchannel_id. */
static inline void
#define MACHINE_FLAG_VM (1UL << 0)
#define MACHINE_FLAG_IEEE (1UL << 1)
-#define MACHINE_FLAG_P390 (1UL << 2)
#define MACHINE_FLAG_CSP (1UL << 3)
#define MACHINE_FLAG_MVPG (1UL << 4)
#define MACHINE_FLAG_DIAG44 (1UL << 5)
#define __NR_timerfd_create 319
#define __NR_timerfd_settime 320
#define __NR_timerfd_gettime 321
-#define NR_syscalls 322
+#define __NR_signalfd4 322
+#define __NR_eventfd2 323
+#define __NR_inotify_init1 324
+#define __NR_pipe2 325
+#define __NR_dup3 326
+#define __NR_epoll_create1 327
+#define NR_syscalls 328
/*
* There are some system calls that are not present on 64 bit, some
+++ /dev/null
-#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
-#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x00000000
-#define P2SEG 0x20000000
-#define P3SEG 0x00000000
-#define P4SEG 0x80000000
-
-#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
+++ /dev/null
-#include <asm/cpu-sh2/cacheflush.h>
+++ /dev/null
-#include <asm/cpu-sh2/dma.h>
+++ /dev/null
-#include <asm/cpu-sh2/mmu_context.h>
+++ /dev/null
-#include <asm/cpu-sh2/timer.h>
+++ /dev/null
-#include <asm/cpu-sh2/ubc.h>
+++ /dev/null
-#include <asm/cpu-sh2/watchdog.h>
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Kaz Kojima
- *
- * Defitions for the address spaces of the SH-3 CPUs.
- */
-#ifndef __ASM_CPU_SH3_ADDRSPACE_H
-#define __ASM_CPU_SH3_ADDRSPACE_H
-
-#define P0SEG 0x00000000
-#define P1SEG 0x80000000
-#define P2SEG 0xa0000000
-#define P3SEG 0xc0000000
-#define P4SEG 0xe0000000
-
-#endif /* __ASM_CPU_SH3_ADDRSPACE_H */
+++ /dev/null
-/*
- * include/asm-sh/cpu-sh3/cacheflush.h
- *
- * Copyright (C) 1999 Niibe Yutaka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
-#define __ASM_CPU_SH3_CACHEFLUSH_H
-
-/*
- * Cache flushing:
- *
- * - flush_cache_all() flushes entire cache
- * - flush_cache_mm(mm) flushes the specified mm context's cache lines
- * - flush_cache_dup mm(mm) handles cache flushing when forking
- * - flush_cache_page(mm, vmaddr, pfn) flushes a single page
- * - flush_cache_range(vma, start, end) flushes a range of pages
- *
- * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
- * - flush_icache_range(start, end) flushes(invalidates) a range for icache
- * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
- *
- * Caches are indexed (effectively) by physical address on SH-3, so
- * we don't need them.
- */
-
-#if defined(CONFIG_SH7705_CACHE_32KB)
-
-/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
- * SH4. Unlike the SH4 this is a unified cache so we need to do some work
- * in mmap when 'exec'ing a new binary
- */
- /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
-#define CACHE_ALIAS 0x00001000
-
-#define PG_mapped PG_arch_1
-
-void flush_cache_all(void);
-void flush_cache_mm(struct mm_struct *mm);
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
-void flush_dcache_page(struct page *pg);
-void flush_icache_range(unsigned long start, unsigned long end);
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#else
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define flush_dcache_page(page) do { } while (0)
-#define flush_icache_range(start, end) do { } while (0)
-#define flush_icache_page(vma,pg) do { } while (0)
-#endif
-
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-
-/* SH3 has unified cache so no special action needed here */
-#define flush_cache_sigtramp(vaddr) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-
-#define p3_cache_init() do { } while (0)
-
-#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
+++ /dev/null
-#ifndef __ASM_SH_CPU_SH3_RTC_H
-#define __ASM_SH_CPU_SH3_RTC_H
-
-#define rtc_reg_size sizeof(u16)
-#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */
-#define RTC_DEF_CAPABILITIES 0UL
-
-#endif /* __ASM_SH_CPU_SH3_RTC_H */
+++ /dev/null
-#ifndef __ASM_CPU_SH3_SIGCONTEXT_H
-#define __ASM_CPU_SH3_SIGCONTEXT_H
-
-struct sigcontext {
- unsigned long oldmask;
-
- /* CPU registers */
- unsigned long sc_regs[16];
- unsigned long sc_pc;
- unsigned long sc_pr;
- unsigned long sc_sr;
- unsigned long sc_gbr;
- unsigned long sc_mach;
- unsigned long sc_macl;
-};
-
-#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */
+++ /dev/null
-#ifndef __ASM_SH_CPU_SH5_TIMER_H
-#define __ASM_SH_CPU_SH5_TIMER_H
-
-#endif /* __ASM_SH_CPU_SH5_TIMER_H */
extern int force_iommu, no_iommu;
extern int iommu_detected;
+extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
+
#ifdef CONFIG_GART_IOMMU
extern int gart_iommu_aperture;
extern int gart_iommu_aperture_allowed;
unsigned long align_mask);
extern void iommu_area_free(unsigned long *map, unsigned long start,
unsigned int nr);
-extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len);
#define __LINUX_MAPLE_H
#include <linux/device.h>
+#include <mach/maple.h>
extern struct bus_type maple_bus_type;
void *sendbuf, *recvbuf, *recvbufdcsp;
unsigned char length;
enum maple_code command;
+ struct mutex mutex;
};
struct maple_devinfo {
unsigned long interval,
unsigned long function);
int maple_driver_register(struct device_driver *drv);
-void maple_add_packet(struct mapleq *mq);
+int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+ u32 command, u32 length, void *data);
+void maple_clear_dev(struct maple_device *mdev);
#define to_maple_dev(n) container_of(n, struct maple_device, dev)
#define to_maple_driver(n) container_of(n, struct maple_driver, drv)
{
smp_wmb();
__set_bit(PG_uptodate, &(page)->flags);
-#ifdef CONFIG_S390
- page_clear_dirty(page);
-#endif
}
static inline void SetPageUptodate(struct page *page)
POWER_SUPPLY_PROP_CHARGE_EMPTY,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
--- /dev/null
+/*
+ * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater)
+ * 1-Cell Li-Ion Charger connected via GPIOs.
+ *
+ * Copyright (c) 2008 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * bq24022_mach_info - platform data for bq24022
+ * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging
+ * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA
+ */
+struct bq24022_mach_info {
+ int gpio_nce;
+ int gpio_iset2;
+};
--- /dev/null
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ * o Voltage and current level control.
+ * o Operating mode control.
+ * o Regulator status.
+ * o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ * Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ * to use most efficient operating mode depending upon voltage and load and
+ * is transparent to client drivers.
+ *
+ * e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ * IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ * idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ * but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ * efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ * in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ * Mode Description
+ * FAST Regulator can handle fast changes in it's load.
+ * e.g. useful in CPU voltage & frequency scaling where
+ * load can quickly increase with CPU frequency increases.
+ *
+ * NORMAL Normal regulator power supply mode. Most drivers will
+ * use this mode.
+ *
+ * IDLE Regulator runs in a more efficient mode for light
+ * loads. Can be used for devices that have a low power
+ * requirement during periods of inactivity. This mode
+ * may be more noisy than NORMAL and may not be able
+ * to handle fast load switching.
+ *
+ * STANDBY Regulator runs in the most efficient mode for very
+ * light loads. Can be used by devices when they are
+ * in a sleep/standby state. This mode is likely to be
+ * the most noisy and may not be able to handle fast load
+ * switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST 0x1
+#define REGULATOR_MODE_NORMAL 0x2
+#define REGULATOR_MODE_IDLE 0x4
+#define REGULATOR_MODE_STANDBY 0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE Regulator output is under voltage.
+ * OVER_CURRENT Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL Regulator output has failed.
+ * OVER_TEMP Regulator over temp.
+ * FORCE_DISABLE Regulator shut down by software.
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01
+#define REGULATOR_EVENT_OVER_CURRENT 0x02
+#define REGULATOR_EVENT_REGULATION_OUT 0x04
+#define REGULATOR_EVENT_FAIL 0x08
+#define REGULATOR_EVENT_OVER_TEMP 0x10
+#define REGULATOR_EVENT_FORCE_DISABLE 0x20
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply The name of the supply. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @consumer The regulator consumer for the supply. This will be managed
+ * by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies. This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+ const char *supply;
+ struct regulator *consumer;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+ const char *id);
+void regulator_put(struct regulator *regulator);
+
+/* regulator output control and status */
+int regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+
+int regulator_bulk_get(struct device *dev, int num_consumers,
+ struct regulator_bulk_data *consumers);
+int regulator_bulk_enable(int num_consumers,
+ struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+ struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+ struct regulator_bulk_data *consumers);
+
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+ int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+ const char *id)
+{
+ /* Nothing except the stubbed out regulator API should be
+ * looking at the value except to check if it is an error
+ * value so the actual return value doesn't matter.
+ */
+ return (struct regulator *)id;
+}
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+ return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+ int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+ int min_uV, int max_uV)
+{
+ return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+ int min_uA, int max_uA)
+{
+ return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+ unsigned int mode)
+{
+ return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+ return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+ int load_uA)
+{
+ return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+ return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+ void *data)
+{
+}
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_constraints;
+struct regulator_dev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+ /* get/set regulator voltage */
+ int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
+ int (*get_voltage) (struct regulator_dev *);
+
+ /* get/set regulator current */
+ int (*set_current_limit) (struct regulator_dev *,
+ int min_uA, int max_uA);
+ int (*get_current_limit) (struct regulator_dev *);
+
+ /* enable/disable regulator */
+ int (*enable) (struct regulator_dev *);
+ int (*disable) (struct regulator_dev *);
+ int (*is_enabled) (struct regulator_dev *);
+
+ /* get/set regulator operating mode (defined in regulator.h) */
+ int (*set_mode) (struct regulator_dev *, unsigned int mode);
+ unsigned int (*get_mode) (struct regulator_dev *);
+
+ /* get most efficient regulator operating mode for load */
+ unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+ int output_uV, int load_uA);
+
+ /* the operations below are for configuration of regulator state when
+ * it's parent PMIC enters a global STANBY/HIBERNATE state */
+
+ /* set regulator suspend voltage */
+ int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+ /* enable/disable regulator in suspend state */
+ int (*set_suspend_enable) (struct regulator_dev *);
+ int (*set_suspend_disable) (struct regulator_dev *);
+
+ /* set regulator suspend operating mode (defined in regulator.h) */
+ int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+ REGULATOR_VOLTAGE,
+ REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+ const char *name;
+ int id;
+ struct regulator_ops *ops;
+ int irq;
+ enum regulator_type type;
+ struct module *owner;
+};
+
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+ void *reg_data);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+ unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+#endif
--- /dev/null
+/*
+ * fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_FIXED_H
+#define __REGULATOR_FIXED_H
+
+struct fixed_voltage_config {
+ const char *supply_name;
+ int microvolts;
+};
+
+#endif
--- /dev/null
+/*
+ * machine.h -- SoC Regulator support, machine/board driver API.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Machine/Board Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_MACHINE_H_
+#define __LINUX_REGULATOR_MACHINE_H_
+
+#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
+
+struct regulator;
+
+/*
+ * Regulator operation constraint flags. These flags are used to enable
+ * certain regulator operations and can be OR'ed together.
+ *
+ * VOLTAGE: Regulator output voltage can be changed by software on this
+ * board/machine.
+ * CURRENT: Regulator output current can be changed by software on this
+ * board/machine.
+ * MODE: Regulator operating mode can be changed by software on this
+ * board/machine.
+ * STATUS: Regulator can be enabled and disabled.
+ * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator.
+ */
+
+#define REGULATOR_CHANGE_VOLTAGE 0x1
+#define REGULATOR_CHANGE_CURRENT 0x2
+#define REGULATOR_CHANGE_MODE 0x4
+#define REGULATOR_CHANGE_STATUS 0x8
+#define REGULATOR_CHANGE_DRMS 0x10
+
+/**
+ * struct regulator_state - regulator state during low power syatem states
+ *
+ * This describes a regulators state during a system wide low power state.
+ */
+struct regulator_state {
+ int uV; /* suspend voltage */
+ unsigned int mode; /* suspend regulator operating mode */
+ int enabled; /* is regulator enabled in this suspend state */
+};
+
+/**
+ * struct regulation_constraints - regulator operating constraints.
+ *
+ * This struct describes regulator and board/machine specific constraints.
+ */
+struct regulation_constraints {
+
+ char *name;
+
+ /* voltage output range (inclusive) - for voltage control */
+ int min_uV;
+ int max_uV;
+
+ /* current output range (inclusive) - for current control */
+ int min_uA;
+ int max_uA;
+
+ /* valid regulator operating modes for this machine */
+ unsigned int valid_modes_mask;
+
+ /* valid operations for regulator on this machine */
+ unsigned int valid_ops_mask;
+
+ /* regulator input voltage - only if supply is another regulator */
+ int input_uV;
+
+ /* regulator suspend states for global PMIC STANDBY/HIBERNATE */
+ struct regulator_state state_disk;
+ struct regulator_state state_mem;
+ struct regulator_state state_standby;
+ suspend_state_t initial_state; /* suspend state to set at init */
+
+ /* constriant flags */
+ unsigned always_on:1; /* regulator never off when system is on */
+ unsigned boot_on:1; /* bootloader/firmware enabled regulator */
+ unsigned apply_uV:1; /* apply uV constraint iff min == max */
+};
+
+int regulator_set_supply(const char *regulator, const char *regulator_supply);
+
+const char *regulator_get_supply(const char *regulator);
+
+int regulator_set_machine_constraints(const char *regulator,
+ struct regulation_constraints *constraints);
+
+int regulator_set_device_supply(const char *regulator, struct device *dev,
+ const char *supply);
+
+int regulator_suspend_prepare(suspend_state_t state);
+
+#endif
loops_per_jiffy &= ~loopbit;
}
}
- printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n",
+ printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n",
loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
}
if (status_get->mask & AUDIT_STATUS_ENABLED) {
err = audit_set_enabled(status_get->enabled,
loginuid, sessionid, sid);
- if (err < 0) return err;
+ if (err < 0)
+ return err;
}
if (status_get->mask & AUDIT_STATUS_FAILURE) {
err = audit_set_failure(status_get->failure,
loginuid, sessionid, sid);
- if (err < 0) return err;
+ if (err < 0)
+ return err;
}
if (status_get->mask & AUDIT_STATUS_PID) {
int new_pid = status_get->pid;
audit_pid = new_pid;
audit_nlk_pid = NETLINK_CB(skb).pid;
}
- if (status_get->mask & AUDIT_STATUS_RATE_LIMIT)
+ if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) {
err = audit_set_rate_limit(status_get->rate_limit,
loginuid, sessionid, sid);
+ if (err < 0)
+ return err;
+ }
if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT)
err = audit_set_backlog_limit(status_get->backlog_limit,
loginuid, sessionid, sid);
{
const unsigned char *p;
for (p = string; p < (const unsigned char *)string + len && *p; p++) {
- if (*p == '"' || *p < 0x21 || *p > 0x7f)
+ if (*p == '"' || *p < 0x21 || *p > 0x7e)
return 1;
}
return 0;
struct audit_buffer *ab;
ab = audit_log_start(NULL, GFP_KERNEL,
AUDIT_CONFIG_CHANGE);
+ audit_log_format(ab, "auid=%u ses=%u",
+ audit_get_loginuid(current),
+ audit_get_sessionid(current));
audit_log_format(ab,
- "op=updated rules specifying path=");
+ " op=updated rules specifying path=");
audit_log_untrustedstring(ab, owatch->path);
audit_log_format(ab, " with dev=%u ino=%lu\n",
dev, ino);
struct audit_buffer *ab;
ab = audit_log_start(NULL, GFP_KERNEL,
AUDIT_CONFIG_CHANGE);
- audit_log_format(ab, "op=remove rule path=");
+ audit_log_format(ab, "auid=%u ses=%u",
+ audit_get_loginuid(current),
+ audit_get_sessionid(current));
+ audit_log_format(ab, " op=remove rule path=");
audit_log_untrustedstring(ab, w->path);
if (r->filterkey) {
audit_log_format(ab, " key=");
if (!result)
return 0;
}
- if (rule->filterkey)
+ if (rule->filterkey && ctx)
ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC);
switch (rule->action) {
case AUDIT_NEVER: *state = AUDIT_DISABLED; break;
struct audit_context *ctx = tsk->audit_context;
if (audit_pid && t->tgid == audit_pid) {
- if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) {
+ if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) {
audit_sig_pid = tsk->pid;
if (tsk->loginuid != -1)
audit_sig_uid = tsk->loginuid;
}
}
EXPORT_SYMBOL(iommu_area_free);
-
-unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
-{
- unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
-
- return size >> PAGE_SHIFT;
-}
-EXPORT_SYMBOL(iommu_num_pages);
#include <linux/mutex.h>
#include <linux/bootmem.h>
#include <linux/sysfs.h>
-
+#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/io.h>
* Leaving it set also helps swapoff to reinstate ptes
* faster for those pages still in swapcache.
*/
- if (page_test_dirty(page)) {
+ if ((!PageAnon(page) || PageSwapCache(page)) &&
+ page_test_dirty(page)) {
page_clear_dirty(page);
set_page_dirty(page);
}
int rc;
rc = selinux_get_mnt_opts(sb, &opts);
- if (rc)
+ if (rc) {
+ /* before policy load we may get EINVAL, don't show anything */
+ if (rc == -EINVAL)
+ rc = 0;
return rc;
+ }
selinux_write_opts(m, &opts);
#include <sound/info.h>
#include <asm/io.h>
#include <asm/dma.h>
-#include <asm/dreamcast/sysasic.h>
+#include <mach/sysasic.h>
#include "aica.h"
MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
git.openpandora.org / pandora-kernel.git / commitdiff