e1000e: 82571 SerDes link handle null code word from partner
authorBruce Allan <bruce.w.allan@intel.com>
Wed, 17 Nov 2010 03:50:13 +0000 (19:50 -0800)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Wed, 17 Nov 2010 03:50:13 +0000 (19:50 -0800)
SerDes Link detection on certain 82571 mezzanine cards can fail when the
link is forced, the link partner does not recognize forced link and the
link partner sends null code words.  Detect the null code words and return
to auto-negotiation state which causes the link partner to begin responding
with valid code words.  Within a reasonable interval the link will finally
settle as forced by both partners.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/e1000e/82571.c
drivers/net/e1000e/defines.h

index 7236f1a..2358563 100644 (file)
@@ -1431,8 +1431,10 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
                         * auto-negotiation in the TXCW register and disable
                         * forced link in the Device Control register in an
                         * attempt to auto-negotiate with our link partner.
+                        * If the partner code word is null, stop forcing
+                        * and restart auto negotiation.
                         */
-                       if (rxcw & E1000_RXCW_C) {
+                       if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW))  {
                                /* Enable autoneg, and unforce link up */
                                ew32(TXCW, mac->txcw);
                                ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
index d3f7a9c..016ea38 100644 (file)
 #define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */
 
 /* Receive Configuration Word */
+#define E1000_RXCW_CW         0x0000ffff        /* RxConfigWord mask */
 #define E1000_RXCW_IV         0x08000000        /* Receive config invalid */
 #define E1000_RXCW_C          0x20000000        /* Receive config */
 #define E1000_RXCW_SYNCH      0x40000000        /* Receive config synch */