/* Insmod parameters */
I2C_CLIENT_INSMOD_1(adm1026);
-static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1 };
+static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1 };
static int gpio_output[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
static int gpio_inverted[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
static int gpio_normal[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
static int gpio_fan[8] = { -1, -1, -1, -1, -1, -1, -1, -1 };
-module_param_array(gpio_input,int,NULL,0);
-MODULE_PARM_DESC(gpio_input,"List of GPIO pins (0-16) to program as inputs");
-module_param_array(gpio_output,int,NULL,0);
-MODULE_PARM_DESC(gpio_output,"List of GPIO pins (0-16) to program as "
+module_param_array(gpio_input, int, NULL, 0);
+MODULE_PARM_DESC(gpio_input, "List of GPIO pins (0-16) to program as inputs");
+module_param_array(gpio_output, int, NULL, 0);
+MODULE_PARM_DESC(gpio_output, "List of GPIO pins (0-16) to program as "
"outputs");
-module_param_array(gpio_inverted,int,NULL,0);
-MODULE_PARM_DESC(gpio_inverted,"List of GPIO pins (0-16) to program as "
+module_param_array(gpio_inverted, int, NULL, 0);
+MODULE_PARM_DESC(gpio_inverted, "List of GPIO pins (0-16) to program as "
"inverted");
-module_param_array(gpio_normal,int,NULL,0);
-MODULE_PARM_DESC(gpio_normal,"List of GPIO pins (0-16) to program as "
+module_param_array(gpio_normal, int, NULL, 0);
+MODULE_PARM_DESC(gpio_normal, "List of GPIO pins (0-16) to program as "
"normal/non-inverted");
-module_param_array(gpio_fan,int,NULL,0);
-MODULE_PARM_DESC(gpio_fan,"List of GPIO pins (0-7) to program as fan tachs");
+module_param_array(gpio_fan, int, NULL, 0);
+MODULE_PARM_DESC(gpio_fan, "List of GPIO pins (0-7) to program as fan tachs");
/* Many ADM1026 constants specified below */
/* The ADM1026 registers */
-#define ADM1026_REG_CONFIG1 0x00
-#define CFG1_MONITOR 0x01
-#define CFG1_INT_ENABLE 0x02
-#define CFG1_INT_CLEAR 0x04
-#define CFG1_AIN8_9 0x08
-#define CFG1_THERM_HOT 0x10
-#define CFG1_DAC_AFC 0x20
-#define CFG1_PWM_AFC 0x40
-#define CFG1_RESET 0x80
-#define ADM1026_REG_CONFIG2 0x01
+#define ADM1026_REG_CONFIG1 0x00
+#define CFG1_MONITOR 0x01
+#define CFG1_INT_ENABLE 0x02
+#define CFG1_INT_CLEAR 0x04
+#define CFG1_AIN8_9 0x08
+#define CFG1_THERM_HOT 0x10
+#define CFG1_DAC_AFC 0x20
+#define CFG1_PWM_AFC 0x40
+#define CFG1_RESET 0x80
+
+#define ADM1026_REG_CONFIG2 0x01
/* CONFIG2 controls FAN0/GPIO0 through FAN7/GPIO7 */
-#define ADM1026_REG_CONFIG3 0x07
-#define CFG3_GPIO16_ENABLE 0x01
-#define CFG3_CI_CLEAR 0x02
-#define CFG3_VREF_250 0x04
-#define CFG3_GPIO16_DIR 0x40
-#define CFG3_GPIO16_POL 0x80
-#define ADM1026_REG_E2CONFIG 0x13
-#define E2CFG_READ 0x01
-#define E2CFG_WRITE 0x02
-#define E2CFG_ERASE 0x04
-#define E2CFG_ROM 0x08
-#define E2CFG_CLK_EXT 0x80
+
+#define ADM1026_REG_CONFIG3 0x07
+#define CFG3_GPIO16_ENABLE 0x01
+#define CFG3_CI_CLEAR 0x02
+#define CFG3_VREF_250 0x04
+#define CFG3_GPIO16_DIR 0x40
+#define CFG3_GPIO16_POL 0x80
+
+#define ADM1026_REG_E2CONFIG 0x13
+#define E2CFG_READ 0x01
+#define E2CFG_WRITE 0x02
+#define E2CFG_ERASE 0x04
+#define E2CFG_ROM 0x08
+#define E2CFG_CLK_EXT 0x80
/* There are 10 general analog inputs and 7 dedicated inputs
* They are:
static u16 ADM1026_REG_TEMP_THERM[] = { 0x0d, 0x0e, 0x0f };
static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
-#define ADM1026_REG_FAN(nr) (0x38 + (nr))
-#define ADM1026_REG_FAN_MIN(nr) (0x60 + (nr))
-#define ADM1026_REG_FAN_DIV_0_3 0x02
-#define ADM1026_REG_FAN_DIV_4_7 0x03
+#define ADM1026_REG_FAN(nr) (0x38 + (nr))
+#define ADM1026_REG_FAN_MIN(nr) (0x60 + (nr))
+#define ADM1026_REG_FAN_DIV_0_3 0x02
+#define ADM1026_REG_FAN_DIV_4_7 0x03
-#define ADM1026_REG_DAC 0x04
-#define ADM1026_REG_PWM 0x05
+#define ADM1026_REG_DAC 0x04
+#define ADM1026_REG_PWM 0x05
-#define ADM1026_REG_GPIO_CFG_0_3 0x08
-#define ADM1026_REG_GPIO_CFG_4_7 0x09
-#define ADM1026_REG_GPIO_CFG_8_11 0x0a
-#define ADM1026_REG_GPIO_CFG_12_15 0x0b
+#define ADM1026_REG_GPIO_CFG_0_3 0x08
+#define ADM1026_REG_GPIO_CFG_4_7 0x09
+#define ADM1026_REG_GPIO_CFG_8_11 0x0a
+#define ADM1026_REG_GPIO_CFG_12_15 0x0b
/* CFG_16 in REG_CFG3 */
-#define ADM1026_REG_GPIO_STATUS_0_7 0x24
-#define ADM1026_REG_GPIO_STATUS_8_15 0x25
+#define ADM1026_REG_GPIO_STATUS_0_7 0x24
+#define ADM1026_REG_GPIO_STATUS_8_15 0x25
/* STATUS_16 in REG_STATUS4 */
-#define ADM1026_REG_GPIO_MASK_0_7 0x1c
-#define ADM1026_REG_GPIO_MASK_8_15 0x1d
+#define ADM1026_REG_GPIO_MASK_0_7 0x1c
+#define ADM1026_REG_GPIO_MASK_8_15 0x1d
/* MASK_16 in REG_MASK4 */
-#define ADM1026_REG_COMPANY 0x16
-#define ADM1026_REG_VERSTEP 0x17
+#define ADM1026_REG_COMPANY 0x16
+#define ADM1026_REG_VERSTEP 0x17
/* These are the recognized values for the above regs */
-#define ADM1026_COMPANY_ANALOG_DEV 0x41
-#define ADM1026_VERSTEP_GENERIC 0x40
-#define ADM1026_VERSTEP_ADM1026 0x44
+#define ADM1026_COMPANY_ANALOG_DEV 0x41
+#define ADM1026_VERSTEP_GENERIC 0x40
+#define ADM1026_VERSTEP_ADM1026 0x44
-#define ADM1026_REG_MASK1 0x18
-#define ADM1026_REG_MASK2 0x19
-#define ADM1026_REG_MASK3 0x1a
-#define ADM1026_REG_MASK4 0x1b
+#define ADM1026_REG_MASK1 0x18
+#define ADM1026_REG_MASK2 0x19
+#define ADM1026_REG_MASK3 0x1a
+#define ADM1026_REG_MASK4 0x1b
-#define ADM1026_REG_STATUS1 0x20
-#define ADM1026_REG_STATUS2 0x21
-#define ADM1026_REG_STATUS3 0x22
-#define ADM1026_REG_STATUS4 0x23
+#define ADM1026_REG_STATUS1 0x20
+#define ADM1026_REG_STATUS2 0x21
+#define ADM1026_REG_STATUS3 0x22
+#define ADM1026_REG_STATUS4 0x23
#define ADM1026_FAN_ACTIVATION_TEMP_HYST -6
-#define ADM1026_FAN_CONTROL_TEMP_RANGE 20
-#define ADM1026_PWM_MAX 255
+#define ADM1026_FAN_CONTROL_TEMP_RANGE 20
+#define ADM1026_PWM_MAX 255
-/* Conversions. Rounding and limit checking is only done on the TO_REG
+/* Conversions. Rounding and limit checking is only done on the TO_REG
* variants. Note that you should be a bit careful with which arguments
* these macros are called: arguments may be evaluated more than once.
*/
* The values in this table are based on Table II, page 15 of the
* datasheet.
*/
-static int adm1026_scaling[] = { /* .001 Volts */
- 2250, 2250, 2250, 2250, 2250, 2250,
- 1875, 1875, 1875, 1875, 3000, 3330,
+static int adm1026_scaling[] = { /* .001 Volts */
+ 2250, 2250, 2250, 2250, 2250, 2250,
+ 1875, 1875, 1875, 1875, 3000, 3330,
3330, 4995, 2250, 12000, 13875
};
#define NEG12_OFFSET 16000
-#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from))
-#define INS_TO_REG(n,val) (SENSORS_LIMIT(SCALE(val,adm1026_scaling[n],192),\
- 0,255))
-#define INS_FROM_REG(n,val) (SCALE(val,192,adm1026_scaling[n]))
+#define SCALE(val, from, to) (((val)*(to) + ((from)/2))/(from))
+#define INS_TO_REG(n, val) (SENSORS_LIMIT(SCALE(val, adm1026_scaling[n], 192),\
+ 0, 255))
+#define INS_FROM_REG(n, val) (SCALE(val, 192, adm1026_scaling[n]))
/* FAN speed is measured using 22.5kHz clock and counts for 2 pulses
* and we assume a 2 pulse-per-rev fan tach signal
* 22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000
*/
-#define FAN_TO_REG(val,div) ((val)<=0 ? 0xff : SENSORS_LIMIT(1350000/((val)*\
- (div)),1,254))
-#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==0xff ? 0 : 1350000/((val)*\
- (div)))
+#define FAN_TO_REG(val, div) ((val) <= 0 ? 0xff : \
+ SENSORS_LIMIT(1350000/((val)*(div)), 1, 254))
+#define FAN_FROM_REG(val, div) ((val) == 0 ? -1:(val) == 0xff ? 0 : \
+ 1350000/((val)*(div)))
#define DIV_FROM_REG(val) (1<<(val))
-#define DIV_TO_REG(val) ((val)>=8 ? 3 : (val)>=4 ? 2 : (val)>=2 ? 1 : 0)
+#define DIV_TO_REG(val) ((val) >= 8 ? 3 : (val) >= 4 ? 2 : (val) >= 2 ? 1 : 0)
/* Temperature is reported in 1 degC increments */
#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
- -127,127))
+ -127, 127))
#define TEMP_FROM_REG(val) ((val) * 1000)
#define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\
- -127,127))
+ -127, 127))
#define OFFSET_FROM_REG(val) ((val) * 1000)
-#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255))
+#define PWM_TO_REG(val) (SENSORS_LIMIT(val, 0, 255))
#define PWM_FROM_REG(val) (val)
#define PWM_MIN_TO_REG(val) ((val) & 0xf0)
#define PWM_MIN_FROM_REG(val) (((val) & 0xf0) + ((val) >> 4))
-/* Analog output is a voltage, and scaled to millivolts. The datasheet
- * indicates that the DAC could be used to drive the fans, but in our
+/* Analog output is a voltage, and scaled to millivolts. The datasheet
+ * indicates that the DAC could be used to drive the fans, but in our
* example board (Arima HDAMA) it isn't connected to the fans at all.
*/
-#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500),0,255))
+#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500), 0, 255))
#define DAC_FROM_REG(val) (((val)*2500)/255)
/* Typically used with systems using a v9.1 VRM spec ? */
* So, we keep the config data up to date in the cache
* when it is written and only sample it once every 5 *minutes*
*/
-#define ADM1026_DATA_INTERVAL (1 * HZ)
-#define ADM1026_CONFIG_INTERVAL (5 * 60 * HZ)
+#define ADM1026_DATA_INTERVAL (1 * HZ)
+#define ADM1026_CONFIG_INTERVAL (5 * 60 * HZ)
/* We allow for multiple chips in a single system.
*
unsigned long last_reading; /* In jiffies */
unsigned long last_config; /* In jiffies */
- u8 in[17]; /* Register value */
- u8 in_max[17]; /* Register value */
- u8 in_min[17]; /* Register value */
- s8 temp[3]; /* Register value */
- s8 temp_min[3]; /* Register value */
- s8 temp_max[3]; /* Register value */
- s8 temp_tmin[3]; /* Register value */
- s8 temp_crit[3]; /* Register value */
- s8 temp_offset[3]; /* Register value */
- u8 fan[8]; /* Register value */
- u8 fan_min[8]; /* Register value */
- u8 fan_div[8]; /* Decoded value */
- struct pwm_data pwm1; /* Pwm control values */
- int vid; /* Decoded value */
- u8 vrm; /* VRM version */
+ u8 in[17]; /* Register value */
+ u8 in_max[17]; /* Register value */
+ u8 in_min[17]; /* Register value */
+ s8 temp[3]; /* Register value */
+ s8 temp_min[3]; /* Register value */
+ s8 temp_max[3]; /* Register value */
+ s8 temp_tmin[3]; /* Register value */
+ s8 temp_crit[3]; /* Register value */
+ s8 temp_offset[3]; /* Register value */
+ u8 fan[8]; /* Register value */
+ u8 fan_min[8]; /* Register value */
+ u8 fan_div[8]; /* Decoded value */
+ struct pwm_data pwm1; /* Pwm control values */
+ int vid; /* Decoded value */
+ u8 vrm; /* VRM version */
u8 analog_out; /* Register value (DAC) */
- long alarms; /* Register encoding, combined */
- long alarm_mask; /* Register encoding, combined */
- long gpio; /* Register encoding, combined */
- long gpio_mask; /* Register encoding, combined */
- u8 gpio_config[17]; /* Decoded value */
- u8 config1; /* Register value */
- u8 config2; /* Register value */
- u8 config3; /* Register value */
+ long alarms; /* Register encoding, combined */
+ long alarm_mask; /* Register encoding, combined */
+ long gpio; /* Register encoding, combined */
+ long gpio_mask; /* Register encoding, combined */
+ u8 gpio_config[17]; /* Decoded value */
+ u8 config1; /* Register value */
+ u8 config2; /* Register value */
+ u8 config3; /* Register value */
};
static int adm1026_attach_adapter(struct i2c_adapter *adapter);
static int adm1026_read_value(struct i2c_client *client, u8 reg);
static int adm1026_write_value(struct i2c_client *client, u8 reg, int value);
static void adm1026_print_gpio(struct i2c_client *client);
-static void adm1026_fixup_gpio(struct i2c_client *client);
+static void adm1026_fixup_gpio(struct i2c_client *client);
static struct adm1026_data *adm1026_update_device(struct device *dev);
static void adm1026_init_client(struct i2c_client *client);
.name = "adm1026",
},
.attach_adapter = adm1026_attach_adapter,
- .detach_client = adm1026_detach_client,
+ .detach_client = adm1026_detach_client,
};
static int adm1026_attach_adapter(struct i2c_adapter *adapter)
int value, i;
struct adm1026_data *data = i2c_get_clientdata(client);
- dev_dbg(&client->dev, "Initializing device\n");
+ dev_dbg(&client->dev, "Initializing device\n");
/* Read chip config */
data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1);
data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2);
* configured, we don't want to mess with them.
* If they weren't, the default is 100% PWM, no
* control and will suffice until 'sensors -s'
- * can be run by the user. We DO set the default
+ * can be run by the user. We DO set the default
* value for pwm1.auto_pwm_min to its maximum
* so that enabling automatic pwm fan control
- * without first setting a value for pwm1.auto_pwm_min
+ * without first setting a value for pwm1.auto_pwm_min
* will not result in potentially dangerous fan speed decrease.
*/
data->pwm1.auto_pwm_min=255;
static void adm1026_print_gpio(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
- int i;
+ int i;
dev_dbg(&client->dev, "GPIO config is:");
for (i = 0;i <= 7;++i) {
data->gpio_config[16] & 0x02 ? "" : "!",
data->gpio_config[16] & 0x01 ? "OUT" : "IN");
} else {
- /* GPIO16 is THERM */
+ /* GPIO16 is THERM */
dev_dbg(&client->dev, "\tTHERM\n");
}
}
static void adm1026_fixup_gpio(struct i2c_client *client)
{
struct adm1026_data *data = i2c_get_clientdata(client);
- int i;
- int value;
+ int i;
+ int value;
/* Make the changes requested. */
/* We may need to unlock/stop monitoring or soft-reset the
}
}
- /* Inverted */
+ /* Inverted */
for (i = 0;i <= 16;++i) {
if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) {
data->gpio_config[gpio_inverted[i]] &= ~ 0x02;
}
}
- /* Normal overrides inverted */
+ /* Normal overrides inverted */
for (i = 0;i <= 16;++i) {
if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) {
data->gpio_config[gpio_normal[i]] |= 0x02;
if (!data->valid
|| time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) {
/* Things that change quickly */
- dev_dbg(&client->dev,"Reading sensor values\n");
+ dev_dbg(&client->dev, "Reading sensor values\n");
for (i = 0;i <= 16;++i) {
data->in[i] =
adm1026_read_value(client, ADM1026_REG_IN[i]);
for (i = 0;i <= 2;++i) {
/* NOTE: temp[] is s8 and we assume 2's complement
- * "conversion" in the assignment */
+ * "conversion" in the assignment */
data->temp[i] =
adm1026_read_value(client, ADM1026_REG_TEMP[i]);
}
- data->pwm1.pwm = adm1026_read_value(client,
+ data->pwm1.pwm = adm1026_read_value(client,
ADM1026_REG_PWM);
- data->analog_out = adm1026_read_value(client,
+ data->analog_out = adm1026_read_value(client,
ADM1026_REG_DAC);
/* GPIO16 is MSbit of alarms, move it to gpio */
alarms = adm1026_read_value(client, ADM1026_REG_STATUS4);
- gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */
+ gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */
alarms &= 0x7f;
alarms <<= 8;
alarms |= adm1026_read_value(client, ADM1026_REG_STATUS3);
data->alarms = alarms;
/* Read the GPIO values */
- gpio |= adm1026_read_value(client,
+ gpio |= adm1026_read_value(client,
ADM1026_REG_GPIO_STATUS_8_15);
gpio <<= 8;
- gpio |= adm1026_read_value(client,
+ gpio |= adm1026_read_value(client,
ADM1026_REG_GPIO_STATUS_0_7);
data->gpio = gpio;
data->last_reading = jiffies;
- }; /* last_reading */
+ }; /* last_reading */
if (!data->valid ||
time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) {
/* Things that don't change often */
dev_dbg(&client->dev, "Reading config values\n");
for (i = 0;i <= 16;++i) {
- data->in_min[i] = adm1026_read_value(client,
+ data->in_min[i] = adm1026_read_value(client,
ADM1026_REG_IN_MIN[i]);
- data->in_max[i] = adm1026_read_value(client,
+ data->in_max[i] = adm1026_read_value(client,
ADM1026_REG_IN_MAX[i]);
}
| (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7)
<< 8);
for (i = 0;i <= 7;++i) {
- data->fan_min[i] = adm1026_read_value(client,
+ data->fan_min[i] = adm1026_read_value(client,
ADM1026_REG_FAN_MIN(i));
data->fan_div[i] = DIV_FROM_REG(value & 0x03);
value >>= 2;
}
for (i = 0; i <= 2; ++i) {
- /* NOTE: temp_xxx[] are s8 and we assume 2's
+ /* NOTE: temp_xxx[] are s8 and we assume 2's
* complement "conversion" in the assignment
*/
- data->temp_min[i] = adm1026_read_value(client,
+ data->temp_min[i] = adm1026_read_value(client,
ADM1026_REG_TEMP_MIN[i]);
- data->temp_max[i] = adm1026_read_value(client,
+ data->temp_max[i] = adm1026_read_value(client,
ADM1026_REG_TEMP_MAX[i]);
- data->temp_tmin[i] = adm1026_read_value(client,
+ data->temp_tmin[i] = adm1026_read_value(client,
ADM1026_REG_TEMP_TMIN[i]);
- data->temp_crit[i] = adm1026_read_value(client,
+ data->temp_crit[i] = adm1026_read_value(client,
ADM1026_REG_TEMP_THERM[i]);
- data->temp_offset[i] = adm1026_read_value(client,
+ data->temp_offset[i] = adm1026_read_value(client,
ADM1026_REG_TEMP_OFFSET[i]);
}
/* Read the STATUS/alarm masks */
- alarms = adm1026_read_value(client, ADM1026_REG_MASK4);
- gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */
- alarms = (alarms & 0x7f) << 8;
+ alarms = adm1026_read_value(client, ADM1026_REG_MASK4);
+ gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */
+ alarms = (alarms & 0x7f) << 8;
alarms |= adm1026_read_value(client, ADM1026_REG_MASK3);
alarms <<= 8;
alarms |= adm1026_read_value(client, ADM1026_REG_MASK2);
data->alarm_mask = alarms;
/* Read the GPIO values */
- gpio |= adm1026_read_value(client,
+ gpio |= adm1026_read_value(client,
ADM1026_REG_GPIO_MASK_8_15);
gpio <<= 8;
gpio |= adm1026_read_value(client, ADM1026_REG_GPIO_MASK_0_7);
data->gpio_mask = gpio;
/* Read various values from CONFIG1 */
- data->config1 = adm1026_read_value(client,
+ data->config1 = adm1026_read_value(client,
ADM1026_REG_CONFIG1);
if (data->config1 & CFG1_PWM_AFC) {
data->pwm1.enable = 2;
- data->pwm1.auto_pwm_min =
+ data->pwm1.auto_pwm_min =
PWM_MIN_FROM_REG(data->pwm1.pwm);
}
/* Read the GPIO config */
- data->config2 = adm1026_read_value(client,
+ data->config2 = adm1026_read_value(client,
ADM1026_REG_CONFIG2);
- data->config3 = adm1026_read_value(client,
+ data->config3 = adm1026_read_value(client,
ADM1026_REG_CONFIG3);
data->gpio_config[16] = (data->config3 >> 6) & 0x03;
}
data->last_config = jiffies;
- }; /* last_config */
+ }; /* last_config */
dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n");
data->vid = (data->gpio >> 11) & 0x1f;
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr]));
+ return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in[nr]));
}
static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]));
+ struct adm1026_data *data = adm1026_update_device(dev);
+ return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
}
static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
data->in_min[nr] = INS_TO_REG(nr, val);
adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]);
mutex_unlock(&data->update_lock);
- return count;
+ return count;
}
static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
char *buf)
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]));
+ return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
}
static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
static ssize_t show_in16(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in[16]) -
+ return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in[16]) -
NEG12_OFFSET);
}
static ssize_t show_in16_min(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_min[16])
+ struct adm1026_data *data = adm1026_update_device(dev);
+ return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in_min[16])
- NEG12_OFFSET);
}
static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET);
adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]);
mutex_unlock(&data->update_lock);
- return count;
+ return count;
}
static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_max[16])
+ return sprintf(buf, "%d\n", INS_FROM_REG(16, data->in_max[16])
- NEG12_OFFSET);
}
static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr],
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
data->fan_div[nr]));
}
static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr],
+ return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
data->fan_div[nr]));
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
return count;
}
-#define fan_offset(offset) \
-static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \
- offset - 1); \
-static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+#define fan_offset(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \
+ offset - 1); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan_min, set_fan_min, offset - 1);
fan_offset(1);
{
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
- int new_min;
- int new_div = data->fan_div[fan];
+ int new_min;
+ int new_div = data->fan_div[fan];
/* 0 and 0xff are special. Don't adjust them */
if (data->fan_min[fan] == 0 || data->fan_min[fan] == 0xff) {
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", data->fan_div[nr]);
+ return sprintf(buf, "%d\n", data->fan_div[nr]);
}
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
int nr = sensor_attr->index;
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
- int val,orig_div,new_div,shift;
+ int val, orig_div, new_div, shift;
val = simple_strtol(buf, NULL, 10);
- new_div = DIV_TO_REG(val);
+ new_div = DIV_TO_REG(val);
if (new_div == 0) {
return -EINVAL;
}
}
if (data->fan_div[nr] != orig_div) {
- fixup_fan_min(dev,nr,orig_div);
+ fixup_fan_min(dev, nr, orig_div);
}
mutex_unlock(&data->update_lock);
return count;
}
-#define fan_offset_div(offset) \
-static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+#define fan_offset_div(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
show_fan_div, set_fan_div, offset - 1);
fan_offset_div(1);
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr]));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
}
static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr,
char *buf)
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
}
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
}
static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
}
#define temp_reg(offset) \
-static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \
+static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \
NULL, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
show_temp_min, set_temp_min, offset - 1); \
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_offset[nr]));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_offset[nr]));
}
static ssize_t set_temp_offset(struct device *dev,
struct device_attribute *attr, const char *buf,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(
ADM1026_FAN_ACTIVATION_TEMP_HYST + data->temp_tmin[nr]));
}
static ssize_t show_temp_auto_point2_temp(struct device *dev,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr] +
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_tmin[nr] +
ADM1026_FAN_CONTROL_TEMP_RANGE));
}
static ssize_t show_temp_auto_point1_temp(struct device *dev,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr]));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_tmin[nr]));
}
static ssize_t set_temp_auto_point1_temp(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
return count;
}
-#define temp_auto_point(offset) \
-static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp, S_IRUGO | S_IWUSR, \
- show_temp_auto_point1_temp, set_temp_auto_point1_temp, \
- offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO, \
- show_temp_auto_point1_temp_hyst, NULL, offset - 1); \
-static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO, \
+#define temp_auto_point(offset) \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp, \
+ S_IRUGO | S_IWUSR, show_temp_auto_point1_temp, \
+ set_temp_auto_point1_temp, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO,\
+ show_temp_auto_point1_temp_hyst, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO, \
show_temp_auto_point2_temp, NULL, offset - 1);
temp_auto_point(1);
struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", (data->config1 & CFG1_THERM_HOT) >> 4);
+ return sprintf(buf, "%d\n", (data->config1 & CFG1_THERM_HOT) >> 4);
}
static ssize_t set_temp_crit_enable(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
if ((val == 1) || (val==0)) {
mutex_lock(&data->update_lock);
data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4);
- adm1026_write_value(client, ADM1026_REG_CONFIG1,
+ adm1026_write_value(client, ADM1026_REG_CONFIG1,
data->config1);
mutex_unlock(&data->update_lock);
}
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
+ return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
}
static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
static ssize_t show_analog_out_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", DAC_FROM_REG(data->analog_out));
+ return sprintf(buf, "%d\n", DAC_FROM_REG(data->analog_out));
}
static ssize_t set_analog_out_reg(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
return count;
}
-static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg,
+static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg,
set_analog_out_reg);
static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid & 0x3f, data->vrm));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = dev_get_drvdata(dev);
- return sprintf(buf,"%d\n", data->vrm);
+ return sprintf(buf, "%d\n", data->vrm);
}
static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
static ssize_t show_alarm_mask(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%ld\n", data->alarm_mask);
+ return sprintf(buf, "%ld\n", data->alarm_mask);
}
static ssize_t set_alarm_mask(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
static ssize_t show_gpio(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%ld\n", data->gpio);
+ return sprintf(buf, "%ld\n", data->gpio);
}
static ssize_t set_gpio(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- long gpio;
+ long gpio;
mutex_lock(&data->update_lock);
data->gpio = val & 0x1ffff;
gpio = data->gpio;
- adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff);
+ adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7, gpio & 0xff);
gpio >>= 8;
- adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff);
+ adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15, gpio & 0xff);
gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f);
- adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff);
+ adm1026_write_value(client, ADM1026_REG_STATUS4, gpio & 0xff);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_gpio_mask(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%ld\n", data->gpio_mask);
+ return sprintf(buf, "%ld\n", data->gpio_mask);
}
static ssize_t set_gpio_mask(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- long mask;
+ long mask;
mutex_lock(&data->update_lock);
data->gpio_mask = val & 0x1ffff;
mask = data->gpio_mask;
- adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff);
+ adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7, mask & 0xff);
mask >>= 8;
- adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff);
+ adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15, mask & 0xff);
mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f);
- adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff);
+ adm1026_write_value(client, ADM1026_REG_MASK1, mask & 0xff);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm1.pwm));
+ return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm1.pwm));
}
static ssize_t set_pwm_reg(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
static ssize_t show_auto_pwm_min(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", data->pwm1.auto_pwm_min);
+ return sprintf(buf, "%d\n", data->pwm1.auto_pwm_min);
}
static ssize_t set_auto_pwm_min(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
- data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255);
+ data->pwm1.auto_pwm_min = SENSORS_LIMIT(val, 0, 255);
if (data->pwm1.enable == 2) { /* apply immediately */
data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
- PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
+ PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm);
}
mutex_unlock(&data->update_lock);
}
static ssize_t show_auto_pwm_max(struct device *dev, struct device_attribute *attr, char *buf)
{
- return sprintf(buf,"%d\n", ADM1026_PWM_MAX);
+ return sprintf(buf, "%d\n", ADM1026_PWM_MAX);
}
static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
{
struct adm1026_data *data = adm1026_update_device(dev);
- return sprintf(buf,"%d\n", data->pwm1.enable);
+ return sprintf(buf, "%d\n", data->pwm1.enable);
}
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
- int old_enable;
+ int old_enable;
if ((val >= 0) && (val < 3)) {
mutex_lock(&data->update_lock);
| ((val == 2) ? CFG1_PWM_AFC : 0);
adm1026_write_value(client, ADM1026_REG_CONFIG1,
data->config1);
- if (val == 2) { /* apply pwm1_auto_pwm_min to pwm1 */
+ if (val == 2) { /* apply pwm1_auto_pwm_min to pwm1 */
data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) |
- PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
- adm1026_write_value(client, ADM1026_REG_PWM,
+ PWM_MIN_TO_REG(data->pwm1.auto_pwm_min));
+ adm1026_write_value(client, ADM1026_REG_PWM,
data->pwm1.pwm);
} else if (!((old_enable == 1) && (val == 1))) {
/* set pwm to safe value */
data->pwm1.pwm = 255;
- adm1026_write_value(client, ADM1026_REG_PWM,
+ adm1026_write_value(client, ADM1026_REG_PWM,
data->pwm1.pwm);
}
mutex_unlock(&data->update_lock);
}
/* enable PWM fan control */
-static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
-static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
-static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
-static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
+static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
+static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg);
+static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
set_pwm_enable);
-static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
set_pwm_enable);
-static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
+static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable,
set_pwm_enable);
-static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm_min, set_auto_pwm_min);
-static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm_min, set_auto_pwm_min);
-static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR,
show_auto_pwm_min, set_auto_pwm_min);
static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL);
dev_dbg(&new_client->dev, ": Autodetection "
"failed\n");
/* Not an ADM1026 ... */
- if (kind == 0) { /* User used force=x,y */
+ if (kind == 0) { /* User used force=x,y */
dev_err(&adapter->dev, "Generic ADM1026 not "
"found at %d,0x%02x. Try "
"force_adm1026.\n",
return i2c_add_driver(&adm1026_driver);
}
-static void __exit sm_adm1026_exit(void)
+static void __exit sm_adm1026_exit(void)
{
i2c_del_driver(&adm1026_driver);
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
- "Justin Thiessen <jthiessen@penguincomputing.com>");
+ "Justin Thiessen <jthiessen@penguincomputing.com>");
MODULE_DESCRIPTION("ADM1026 driver");
module_init(sm_adm1026_init);
git.openpandora.org / pandora-kernel.git / commitdiff