[SCSI] mptfc: set fibre channel fw target missing timers to one second
authorMichael Reed <mdr@sgi.com>
Wed, 24 May 2006 20:07:24 +0000 (15:07 -0500)
committerJames Bottomley <jejb@mulgrave.il.steeleye.com>
Sat, 10 Jun 2006 20:59:19 +0000 (15:59 -0500)
The fibre channel firmware provides a timer which is similar in purpose
to the fibre channel transport's device loss timer.  The effect of this
timer is to extend the total time that a target will be missing beyond
the value associated with the transport's timer.  This patch changes
the firmware timer to a default of one second which significantly reduces
the lag between when a target goes missing and the notification of the
fibre channel transport.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/message/fusion/mptbase.h
drivers/message/fusion/mptfc.c

index 693c95c..29f6b98 100644 (file)
@@ -487,6 +487,15 @@ typedef    struct _RaidCfgData {
        int              isRaid;                /* bit field, 1 if RAID */
 }RaidCfgData;
 
+typedef struct _FcCfgData {
+       /* will ultimately hold fc_port_page0 also */
+       struct {
+               FCPortPage1_t   *data;
+               dma_addr_t       dma;
+               int              pg_sz;
+       }                        fc_port_page1[2];
+} FcCfgData;
+
 #define MPT_RPORT_INFO_FLAGS_REGISTERED        0x01    /* rport registered */
 #define MPT_RPORT_INFO_FLAGS_MISSING   0x02    /* missing from DevPage0 scan */
 
@@ -565,6 +574,7 @@ typedef struct _MPT_ADAPTER
        SpiCfgData              spi_data;       /* Scsi config. data */
        RaidCfgData             raid_data;      /* Raid config. data */
        SasCfgData              sas_data;       /* Sas config. data */
+       FcCfgData               fc_data;        /* Fc config. data */
        MPT_IOCTL               *ioctl;         /* ioctl data pointer */
        struct proc_dir_entry   *ioc_dentry;
        struct _MPT_ADAPTER     *alt_ioc;       /* ptr to 929 bound adapter port */
index e518bc9..918aca0 100644 (file)
@@ -169,13 +169,6 @@ static struct fc_function_template mptfc_transport_functions = {
 
 };
 
-/* FIXME! values controlling firmware RESCAN event
- * need to be set low to allow dev_loss_tmo to
- * work as expected.  Currently, firmware doesn't
- * notify driver of RESCAN event until some number
- * of seconds elapse.  This value can be set via
- * lsiutil.
- */
 static void
 mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
 {
@@ -700,6 +693,153 @@ mptfc_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum)
        return rc;
 }
 
+static int
+mptfc_WriteFcPortPage1(MPT_ADAPTER *ioc, int portnum)
+{
+       ConfigPageHeader_t       hdr;
+       CONFIGPARMS              cfg;
+       int                      rc;
+
+       if (portnum > 1)
+               return -EINVAL;
+
+       if (!(ioc->fc_data.fc_port_page1[portnum].data))
+               return -EINVAL;
+
+       /* get fcport page 1 header */
+       hdr.PageVersion = 0;
+       hdr.PageLength = 0;
+       hdr.PageNumber = 1;
+       hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+       cfg.cfghdr.hdr = &hdr;
+       cfg.physAddr = -1;
+       cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+       cfg.dir = 0;
+       cfg.pageAddr = portnum;
+       cfg.timeout = 0;
+
+       if ((rc = mpt_config(ioc, &cfg)) != 0)
+               return rc;
+
+       if (hdr.PageLength == 0)
+               return -ENODEV;
+
+       if (hdr.PageLength*4 != ioc->fc_data.fc_port_page1[portnum].pg_sz)
+               return -EINVAL;
+
+       cfg.physAddr = ioc->fc_data.fc_port_page1[portnum].dma;
+       cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+       cfg.dir = 1;
+
+       rc = mpt_config(ioc, &cfg);
+
+       return rc;
+}
+
+static int
+mptfc_GetFcPortPage1(MPT_ADAPTER *ioc, int portnum)
+{
+       ConfigPageHeader_t       hdr;
+       CONFIGPARMS              cfg;
+       FCPortPage1_t           *page1_alloc;
+       dma_addr_t               page1_dma;
+       int                      data_sz;
+       int                      rc;
+
+       if (portnum > 1)
+               return -EINVAL;
+
+       /* get fcport page 1 header */
+       hdr.PageVersion = 0;
+       hdr.PageLength = 0;
+       hdr.PageNumber = 1;
+       hdr.PageType = MPI_CONFIG_PAGETYPE_FC_PORT;
+       cfg.cfghdr.hdr = &hdr;
+       cfg.physAddr = -1;
+       cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+       cfg.dir = 0;
+       cfg.pageAddr = portnum;
+       cfg.timeout = 0;
+
+       if ((rc = mpt_config(ioc, &cfg)) != 0)
+               return rc;
+
+       if (hdr.PageLength == 0)
+               return -ENODEV;
+
+start_over:
+
+       if (ioc->fc_data.fc_port_page1[portnum].data == NULL) {
+               data_sz = hdr.PageLength * 4;
+               if (data_sz < sizeof(FCPortPage1_t))
+                       data_sz = sizeof(FCPortPage1_t);
+
+               page1_alloc = (FCPortPage1_t *) pci_alloc_consistent(ioc->pcidev,
+                                               data_sz,
+                                               &page1_dma);
+               if (!page1_alloc)
+                       return -ENOMEM;
+       }
+       else {
+               page1_alloc = ioc->fc_data.fc_port_page1[portnum].data;
+               page1_dma = ioc->fc_data.fc_port_page1[portnum].dma;
+               data_sz = ioc->fc_data.fc_port_page1[portnum].pg_sz;
+               if (hdr.PageLength * 4 > data_sz) {
+                       ioc->fc_data.fc_port_page1[portnum].data = NULL;
+                       pci_free_consistent(ioc->pcidev, data_sz, (u8 *)
+                               page1_alloc, page1_dma);
+                       goto start_over;
+               }
+       }
+
+       memset(page1_alloc,0,data_sz);
+
+       cfg.physAddr = page1_dma;
+       cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+       if ((rc = mpt_config(ioc, &cfg)) == 0) {
+               ioc->fc_data.fc_port_page1[portnum].data = page1_alloc;
+               ioc->fc_data.fc_port_page1[portnum].pg_sz = data_sz;
+               ioc->fc_data.fc_port_page1[portnum].dma = page1_dma;
+       }
+       else {
+               ioc->fc_data.fc_port_page1[portnum].data = NULL;
+               pci_free_consistent(ioc->pcidev, data_sz, (u8 *)
+                       page1_alloc, page1_dma);
+       }
+
+       return rc;
+}
+
+static void
+mptfc_SetFcPortPage1_defaults(MPT_ADAPTER *ioc)
+{
+       int             ii;
+       FCPortPage1_t   *pp1;
+
+       #define MPTFC_FW_DEVICE_TIMEOUT (1)
+       #define MPTFC_FW_IO_PEND_TIMEOUT (1)
+       #define ON_FLAGS  (MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY)
+       #define OFF_FLAGS (MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS)
+
+       for (ii=0; ii<ioc->facts.NumberOfPorts; ii++) {
+               if (mptfc_GetFcPortPage1(ioc, ii) != 0)
+                       continue;
+               pp1 = ioc->fc_data.fc_port_page1[ii].data;
+               if ((pp1->InitiatorDeviceTimeout == MPTFC_FW_DEVICE_TIMEOUT)
+                && (pp1->InitiatorIoPendTimeout == MPTFC_FW_IO_PEND_TIMEOUT)
+                && ((pp1->Flags & ON_FLAGS) == ON_FLAGS)
+                && ((pp1->Flags & OFF_FLAGS) == 0))
+                       continue;
+               pp1->InitiatorDeviceTimeout = MPTFC_FW_DEVICE_TIMEOUT;
+               pp1->InitiatorIoPendTimeout = MPTFC_FW_IO_PEND_TIMEOUT;
+               pp1->Flags &= ~OFF_FLAGS;
+               pp1->Flags |= ON_FLAGS;
+               mptfc_WriteFcPortPage1(ioc, ii);
+       }
+}
+
+
 static void
 mptfc_init_host_attr(MPT_ADAPTER *ioc,int portnum)
 {
@@ -1000,6 +1140,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
        for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
                (void) mptfc_GetFcPortPage0(ioc, ii);
        }
+       mptfc_SetFcPortPage1_defaults(ioc);
 
        /*
         * scan for rports -
@@ -1086,6 +1227,7 @@ mptfc_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
        }
 
        else {  /* MPT_IOC_POST_RESET */
+               mptfc_SetFcPortPage1_defaults(ioc);
                spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
                if (ioc->fc_rescan_work_q) {
                        if (ioc->fc_rescan_work_count++ == 0) {
@@ -1112,8 +1254,8 @@ mptfc_init(void)
 
        show_mptmod_ver(my_NAME, my_VERSION);
 
-       /* sanity check module parameter */
-       if (mptfc_dev_loss_tmo == 0)
+       /* sanity check module parameters */
+       if (mptfc_dev_loss_tmo <= 0)
                mptfc_dev_loss_tmo = MPTFC_DEV_LOSS_TMO;
 
        mptfc_transport_template =
@@ -1156,6 +1298,7 @@ mptfc_remove(struct pci_dev *pdev)
        struct mptfc_rport_info *p, *n;
        struct workqueue_struct *work_q;
        unsigned long           flags;
+       int                     ii;
 
        /* destroy workqueue */
        if ((work_q=ioc->fc_rescan_work_q)) {
@@ -1172,6 +1315,16 @@ mptfc_remove(struct pci_dev *pdev)
                kfree(p);
        }
 
+       for (ii=0; ii<ioc->facts.NumberOfPorts; ii++) {
+               if (ioc->fc_data.fc_port_page1[ii].data) {
+                       pci_free_consistent(ioc->pcidev,
+                               ioc->fc_data.fc_port_page1[ii].pg_sz,
+                               (u8 *) ioc->fc_data.fc_port_page1[ii].data,
+                               ioc->fc_data.fc_port_page1[ii].dma);
+                       ioc->fc_data.fc_port_page1[ii].data = NULL;
+               }
+       }
+
        mptscsih_remove(pdev);
 }