Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (adt7473) minor cleanup / refactoring
  hwmon: (asb100) Remove some dead code
  hwmon: (lm75) Fix an incorrect comment
  hwmon: (w83793) VID and VRM handling cleanups
  hwmon: (w83l785ts) Don't ask the user to report failures
  hwmon: (smsc47b397) add a new chip id (0x8c)

diff --git a/Documentation/hwmon/w83l785ts b/Documentation/hwmon/w83l785ts
index 1841ced..bd1fa9d 100644 (file)
--- a/Documentation/hwmon/w83l785ts
+++ b/Documentation/hwmon/w83l785ts
@@ -33,7 +33,8 @@ Known Issues
 ------------
 
 On some systems (Asus), the BIOS is known to interfere with the driver
-and cause read errors. The driver will retry a given number of times
+and cause read errors. Or maybe the W83L785TS-S chip is simply unreliable,
+we don't really know. The driver will retry a given number of times
 (5 by default) and then give up, returning the old value (or 0 if
 there is no old value). It seems to work well enough so that you should
 not notice anything. Thanks to James Bolt for helping test this feature.

diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 9587869..c1009d6 100644 (file)
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -422,18 +422,14 @@ static ssize_t show_volt(struct device *dev, struct device_attribute *devattr,
  * number in the range -128 to 127, or as an unsigned number that must
  * be offset by 64.
  */
-static int decode_temp(struct adt7473_data *data, u8 raw)
+static int decode_temp(u8 twos_complement, u8 raw)
 {
-       if (data->temp_twos_complement)
-               return (s8)raw;
-       return raw - 64;
+       return twos_complement ? (s8)raw : raw - 64;
 }
 
-static u8 encode_temp(struct adt7473_data *data, int cooked)
+static u8 encode_temp(u8 twos_complement, int cooked)
 {
-       if (data->temp_twos_complement)
-               return (cooked & 0xFF);
-       return cooked + 64;
+       return twos_complement ? cooked & 0xFF : cooked + 64;
 }
 
 static ssize_t show_temp_min(struct device *dev,
@@ -442,8 +438,9 @@ static ssize_t show_temp_min(struct device *dev,
 {
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adt7473_data *data = adt7473_update_device(dev);
-       return sprintf(buf, "%d\n",
-                      1000 * decode_temp(data, data->temp_min[attr->index]));
+       return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                               data->temp_twos_complement,
+                                               data->temp_min[attr->index]));
 }
 
 static ssize_t set_temp_min(struct device *dev,
@@ -455,7 +452,7 @@ static ssize_t set_temp_min(struct device *dev,
        struct i2c_client *client = to_i2c_client(dev);
        struct adt7473_data *data = i2c_get_clientdata(client);
        int temp = simple_strtol(buf, NULL, 10) / 1000;
-       temp = encode_temp(data, temp);
+       temp = encode_temp(data->temp_twos_complement, temp);
 
        mutex_lock(&data->lock);
        data->temp_min[attr->index] = temp;
@@ -472,8 +469,9 @@ static ssize_t show_temp_max(struct device *dev,
 {
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adt7473_data *data = adt7473_update_device(dev);
-       return sprintf(buf, "%d\n",
-                      1000 * decode_temp(data, data->temp_max[attr->index]));
+       return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                               data->temp_twos_complement,
+                                               data->temp_max[attr->index]));
 }
 
 static ssize_t set_temp_max(struct device *dev,
@@ -485,7 +483,7 @@ static ssize_t set_temp_max(struct device *dev,
        struct i2c_client *client = to_i2c_client(dev);
        struct adt7473_data *data = i2c_get_clientdata(client);
        int temp = simple_strtol(buf, NULL, 10) / 1000;
-       temp = encode_temp(data, temp);
+       temp = encode_temp(data->temp_twos_complement, temp);
 
        mutex_lock(&data->lock);
        data->temp_max[attr->index] = temp;
@@ -501,8 +499,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 {
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adt7473_data *data = adt7473_update_device(dev);
-       return sprintf(buf, "%d\n",
-                      1000 * decode_temp(data, data->temp[attr->index]));
+       return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                               data->temp_twos_complement,
+                                               data->temp[attr->index]));
 }
 
 static ssize_t show_fan_min(struct device *dev,
@@ -671,8 +670,9 @@ static ssize_t show_temp_tmax(struct device *dev,
 {
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adt7473_data *data = adt7473_update_device(dev);
-       return sprintf(buf, "%d\n",
-                      1000 * decode_temp(data, data->temp_tmax[attr->index]));
+       return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                               data->temp_twos_complement,
+                                               data->temp_tmax[attr->index]));
 }
 
 static ssize_t set_temp_tmax(struct device *dev,
@@ -684,7 +684,7 @@ static ssize_t set_temp_tmax(struct device *dev,
        struct i2c_client *client = to_i2c_client(dev);
        struct adt7473_data *data = i2c_get_clientdata(client);
        int temp = simple_strtol(buf, NULL, 10) / 1000;
-       temp = encode_temp(data, temp);
+       temp = encode_temp(data->temp_twos_complement, temp);
 
        mutex_lock(&data->lock);
        data->temp_tmax[attr->index] = temp;
@@ -701,8 +701,9 @@ static ssize_t show_temp_tmin(struct device *dev,
 {
        struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
        struct adt7473_data *data = adt7473_update_device(dev);
-       return sprintf(buf, "%d\n",
-                      1000 * decode_temp(data, data->temp_tmin[attr->index]));
+       return sprintf(buf, "%d\n", 1000 * decode_temp(
+                                               data->temp_twos_complement,
+                                               data->temp_tmin[attr->index]));
 }
 
 static ssize_t set_temp_tmin(struct device *dev,
@@ -714,7 +715,7 @@ static ssize_t set_temp_tmin(struct device *dev,
        struct i2c_client *client = to_i2c_client(dev);
        struct adt7473_data *data = i2c_get_clientdata(client);
        int temp = simple_strtol(buf, NULL, 10) / 1000;
-       temp = encode_temp(data, temp);
+       temp = encode_temp(data->temp_twos_complement, temp);
 
        mutex_lock(&data->lock);
        data->temp_tmin[attr->index] = temp;

diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 84712a2..fe2eea4 100644 (file)
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -953,12 +953,8 @@ static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
 static void asb100_init_client(struct i2c_client *client)
 {
        struct asb100_data *data = i2c_get_clientdata(client);
-       int vid = 0;
 
-       vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
-       vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
        data->vrm = vid_which_vrm();
-       vid = vid_from_reg(vid, data->vrm);
 
        /* Start monitoring */
        asb100_write_value(client, ASB100_REG_CONFIG,

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 115f409..fa76969 100644 (file)
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -248,7 +248,7 @@ static int lm75_detach_client(struct i2c_client *client)
 
 /* All registers are word-sized, except for the configuration register.
    LM75 uses a high-byte first convention, which is exactly opposite to
-   the usual practice. */
+   the SMBus standard. */
 static int lm75_read_value(struct i2c_client *client, u8 reg)
 {
        if (reg == LM75_REG_CONF)
@@ -257,9 +257,6 @@ static int lm75_read_value(struct i2c_client *client, u8 reg)
                return swab16(i2c_smbus_read_word_data(client, reg));
 }
 
-/* All registers are word-sized, except for the configuration register.
-   LM75 uses a high-byte first convention, which is exactly opposite to
-   the usual practice. */
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
 {
        if (reg == LM75_REG_CONF)

diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index f61d8f4..eb03544 100644 (file)
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -335,11 +335,23 @@ exit:
 static int __init smsc47b397_find(unsigned short *addr)
 {
        u8 id, rev;
+       char *name;
 
        superio_enter();
        id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
 
-       if ((id != 0x6f) && (id != 0x81) && (id != 0x85)) {
+       switch(id) {
+       case 0x81:
+               name = "SCH5307-NS";
+               break;
+       case 0x6f:
+               name = "LPC47B397-NC";
+               break;
+       case 0x85:
+       case 0x8c:
+               name = "SCH5317";
+               break;
+       default:
                superio_exit();
                return -ENODEV;
        }
@@ -352,8 +364,7 @@ static int __init smsc47b397_find(unsigned short *addr)
 
        printk(KERN_INFO DRVNAME ": found SMSC %s "
                "(base address 0x%04x, revision %u)\n",
-               id == 0x81 ? "SCH5307-NS" : id == 0x85 ? "SCH5317" :
-              "LPC47B397-NC", *addr, rev);
+               name, *addr, rev);
 
        superio_exit();
        return 0;

diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index ee35af9..ed3c019 100644 (file)
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1024,10 +1024,9 @@ static struct sensor_device_attribute_2 w83793_vid[] = {
        SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
        SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
 };
+static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
 
 static struct sensor_device_attribute_2 sda_single_files[] = {
-       SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
-                     NOT_USED, NOT_USED),
        SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
                      store_chassis_clear, ALARM_STATUS, 30),
        SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
@@ -1080,6 +1079,7 @@ static int w83793_detach_client(struct i2c_client *client)
 
                for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
                        device_remove_file(dev, &w83793_vid[i].dev_attr);
+               device_remove_file(dev, &dev_attr_vrm);
 
                for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
                        device_remove_file(dev, &w83793_left_fan[i].dev_attr);
@@ -1282,7 +1282,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
        /* Initialize the chip */
        w83793_init_client(client);
 
-       data->vrm = vid_which_vrm();
        /*
           Only fan 1-5 has their own input pins,
           Pwm 1-3 has their own pins
@@ -1293,7 +1292,9 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
        val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
 
        /* check the function of pins 49-56 */
-       if (!(tmp & 0x80)) {
+       if (tmp & 0x80) {
+               data->has_vid |= 0x2;   /* has VIDB */
+       } else {
                data->has_pwm |= 0x18;  /* pwm 4,5 */
                if (val & 0x01) {       /* fan 6 */
                        data->has_fan |= 0x20;
@@ -1309,13 +1310,15 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
                }
        }
 
+       /* check the function of pins 37-40 */
+       if (!(tmp & 0x29))
+               data->has_vid |= 0x1;   /* has VIDA */
        if (0x08 == (tmp & 0x0c)) {
                if (val & 0x08) /* fan 9 */
                        data->has_fan |= 0x100;
                if (val & 0x10) /* fan 10 */
                        data->has_fan |= 0x200;
        }
-
        if (0x20 == (tmp & 0x30)) {
                if (val & 0x20) /* fan 11 */
                        data->has_fan |= 0x400;
@@ -1359,13 +1362,6 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
        if (tmp & 0x02)
                data->has_temp |= 0x20;
 
-       /* Detect the VID usage and ignore unused input */
-       tmp = w83793_read_value(client, W83793_REG_MFC);
-       if (!(tmp & 0x29))
-               data->has_vid |= 0x1;   /* has VIDA */
-       if (tmp & 0x80)
-               data->has_vid |= 0x2;   /* has VIDB */
-
        /* Register sysfs hooks */
        for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
                err = device_create_file(dev,
@@ -1381,6 +1377,12 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
                if (err)
                        goto exit_remove;
        }
+       if (data->has_vid) {
+               data->vrm = vid_which_vrm();
+               err = device_create_file(dev, &dev_attr_vrm);
+               if (err)
+                       goto exit_remove;
+       }
 
        for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
                err = device_create_file(dev, &sda_single_files[i].dev_attr);

diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 77f2d48..52e268e 100644 (file)
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -301,8 +301,8 @@ static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval)
                msleep(i);
        }
 
-       dev_err(&client->dev, "Couldn't read value from register 0x%02x. "
-               "Please report.\n", reg);
+       dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n",
+               reg);
        return defval;
 }