+++ /dev/null
-/*
- * arch/arm/mach-ixp4xx/nas100d-power.c
- *
- * NAS 100d Power/Reset driver
- *
- * Copyright (C) 2005 Tower Technologies
- *
- * based on nas100d-io.c
- * Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-
-/* This is used to make sure the power-button pusher is serious. The button
- * must be held until the value of this counter reaches zero.
- */
-static int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void nas100d_power_handler(unsigned long data);
-static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
-
-static void nas100d_power_handler(unsigned long data)
-{
- /* This routine is called twice per second to check the
- * state of the power button.
- */
-
- if (gpio_get_value(NAS100D_PB_GPIO)) {
-
- /* IO Pin is 1 (button pushed) */
- if (power_button_countdown > 0)
- power_button_countdown--;
-
- } else {
-
- /* Done on button release, to allow for auto-power-on mods. */
- if (power_button_countdown == 0) {
- /* Signal init to do the ctrlaltdel action,
- * this will bypass init if it hasn't started
- * and do a kernel_restart.
- */
- ctrl_alt_del();
-
- /* Change the state of the power LED to "blink" */
- gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
- } else {
- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
- }
- }
-
- mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-{
- /* This is the paper-clip reset, it shuts the machine down directly. */
- machine_power_off();
-
- return IRQ_HANDLED;
-}
-
-static int __init nas100d_power_init(void)
-{
- if (!(machine_is_nas100d()))
- return 0;
-
- set_irq_type(gpio_to_irq(NAS100D_RB_GPIO), IRQT_LOW);
-
- if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
- IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
-
- printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
- gpio_to_irq(NAS100D_RB_GPIO));
-
- return -EIO;
- }
-
- /* The power button on the Iomega NAS100d is on GPIO 14, but
- * it cannot handle interrupts on that GPIO line. So we'll
- * have to poll it with a kernel timer.
- */
-
- /* Make sure that the power button GPIO is set up as an input */
- gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
-
- /* Set the initial value for the power button IRQ handler */
- power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
- mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-
- return 0;
-}
-
-static void __exit nas100d_power_exit(void)
-{
- if (!(machine_is_nas100d()))
- return;
-
- del_timer_sync(&nas100d_power_timer);
-
- free_irq(gpio_to_irq(NAS100D_RB_GPIO), NULL);
-}
-
-module_init(nas100d_power_init);
-module_exit(nas100d_power_exit);
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("NAS100D Power/Reset driver");
-MODULE_LICENSE("GPL");
*
* NAS 100d board-setup
*
- * based ixdp425-setup.c:
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
* Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nas100d-power.c:
+ * Copyright (C) 2005 Tower Technologies
+ * based on nas100d-io.c
+ * Copyright (C) 2004 Karen Spearel
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
* Author: Rod Whitby <rod@whitby.id.au>
*/
#include <linux/if_ether.h>
-#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/leds.h>
+#include <linux/reboot.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/io.h>
+#include <asm/gpio.h>
static struct flash_platform_data nas100d_flash_data = {
.map_name = "cfi_probe",
gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
}
+/* This is used to make sure the power-button pusher is serious. The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void nas100d_power_handler(unsigned long data);
+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
+
+static void nas100d_power_handler(unsigned long data)
+{
+ /* This routine is called twice per second to check the
+ * state of the power button.
+ */
+
+ if (gpio_get_value(NAS100D_PB_GPIO)) {
+
+ /* IO Pin is 1 (button pushed) */
+ if (power_button_countdown > 0)
+ power_button_countdown--;
+
+ } else {
+
+ /* Done on button release, to allow for auto-power-on mods. */
+ if (power_button_countdown == 0) {
+ /* Signal init to do the ctrlaltdel action,
+ * this will bypass init if it hasn't started
+ * and do a kernel_restart.
+ */
+ ctrl_alt_del();
+
+ /* Change the state of the power LED to "blink" */
+ gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+ } else {
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+ }
+ }
+
+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
+{
+ /* This is the paper-clip reset, it shuts the machine down directly. */
+ machine_power_off();
+
+ return IRQ_HANDLED;
+}
+
static void __init nas100d_init(void)
{
DECLARE_MAC_BUF(mac_buf);
nas100d_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
- pm_power_off = nas100d_power_off;
-
i2c_register_board_info(0, nas100d_i2c_board_info,
ARRAY_SIZE(nas100d_i2c_board_info));
platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+ pm_power_off = nas100d_power_off;
+
+ if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
+ IRQF_DISABLED | IRQF_TRIGGER_LOW,
+ "NAS100D reset button", NULL) < 0) {
+
+ printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+ gpio_to_irq(NAS100D_RB_GPIO));
+ }
+
+ /* The power button on the Iomega NAS100d is on GPIO 14, but
+ * it cannot handle interrupts on that GPIO line. So we'll
+ * have to poll it with a kernel timer.
+ */
+
+ /* Make sure that the power button GPIO is set up as an input */
+ gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
+
+ /* Set the initial value for the power button IRQ handler */
+ power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+ mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
/*
* Map in a portion of the flash and read the MAC address.
* Since it is stored in BE in the flash itself, we need to
git.openpandora.org / pandora-kernel.git / commitdiff