Merge branch 'linux-2.6'
authorPaul Mackerras <paulus@samba.org>
Wed, 13 Sep 2006 21:07:18 +0000 (07:07 +1000)
committerPaul Mackerras <paulus@samba.org>
Wed, 13 Sep 2006 21:07:18 +0000 (07:07 +1000)
295 files changed:
Documentation/SubmittingPatches
Documentation/cciss.txt
Documentation/feature-removal-schedule.txt
Documentation/i386/boot.txt
Documentation/i386/zero-page.txt
Makefile
arch/arm/configs/csb337_defconfig
arch/arm/mach-ixp4xx/nslu2-pci.c
arch/arm/mach-ixp4xx/nslu2-power.c
arch/arm/mach-s3c2410/Makefile
arch/arm/mach-s3c2410/cpu.h
arch/arm/mach-s3c2410/devs.c
arch/arm/mach-s3c2410/dma.c
arch/arm/mach-s3c2410/irq.c
arch/arm/mach-s3c2410/irq.h
arch/arm/mach-s3c2410/mach-bast.c
arch/arm/mach-s3c2410/mach-h1940.c
arch/arm/mach-s3c2410/mach-rx3715.c
arch/arm/mach-s3c2410/mach-smdk2410.c
arch/arm/mach-s3c2410/mach-smdk2413.c
arch/arm/mach-s3c2410/mach-vr1000.c
arch/arm/mach-s3c2410/s3c2400-gpio.c
arch/arm/mach-s3c2410/s3c2410.h
arch/arm/mach-s3c2410/s3c2412-irq.c [new file with mode: 0644]
arch/arm/mach-s3c2410/s3c2440-irq.c
arch/arm/mach-s3c2410/s3c244x-irq.c
arch/arm/mm/flush.c
arch/arm/mm/proc-arm926.S
arch/arm/vfp/vfp.h
arch/arm/vfp/vfpdouble.c
arch/arm/vfp/vfphw.S
arch/arm/vfp/vfpsingle.c
arch/frv/Kconfig
arch/frv/kernel/time.c
arch/i386/kernel/Makefile
arch/i386/kernel/audit.c [deleted file]
arch/i386/kernel/hpet.c
arch/ia64/Kconfig
arch/ia64/ia32/audit.c
arch/ia64/kernel/audit.c
arch/ia64/kernel/entry.S
arch/ia64/kernel/head.S
arch/ia64/kernel/perfmon.c
arch/ia64/kernel/sys_ia64.c
arch/ia64/sn/kernel/setup.c
arch/powerpc/Kconfig
arch/powerpc/configs/cell_defconfig
arch/powerpc/configs/chrp32_defconfig
arch/powerpc/configs/g5_defconfig
arch/powerpc/configs/iseries_defconfig
arch/powerpc/configs/maple_defconfig
arch/powerpc/configs/mpc7448_hpc2_defconfig
arch/powerpc/configs/mpc834x_itx_defconfig
arch/powerpc/configs/mpc834x_mds_defconfig
arch/powerpc/configs/mpc8540_ads_defconfig
arch/powerpc/configs/mpc85xx_cds_defconfig
arch/powerpc/configs/mpc8641_hpcn_defconfig
arch/powerpc/configs/pmac32_defconfig
arch/powerpc/configs/ppc64_defconfig
arch/powerpc/configs/pseries_defconfig
arch/powerpc/kernel/Makefile
arch/powerpc/kernel/audit.c [new file with mode: 0644]
arch/powerpc/kernel/compat_audit.c [new file with mode: 0644]
arch/powerpc/kernel/crash.c
arch/powerpc/kernel/misc.S
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
arch/powerpc/platforms/powermac/pfunc_base.c
arch/powerpc/platforms/powermac/pic.c
arch/powerpc/sysdev/dart_iommu.c
arch/ppc/configs/prep_defconfig
arch/s390/Kconfig
arch/s390/kernel/Makefile
arch/s390/kernel/audit.c [new file with mode: 0644]
arch/s390/kernel/compat_audit.c [new file with mode: 0644]
arch/s390/lib/uaccess.S
arch/s390/lib/uaccess64.S
arch/sh64/Makefile
arch/sh64/kernel/process.c
arch/sh64/mach-cayman/setup.c
arch/sh64/mm/ioremap.c
arch/sparc/kernel/sys_sparc.c
arch/sparc64/Kconfig
arch/sparc64/kernel/Makefile
arch/sparc64/kernel/audit.c [new file with mode: 0644]
arch/sparc64/kernel/compat_audit.c [new file with mode: 0644]
arch/sparc64/kernel/sys_sparc.c
arch/x86_64/Kconfig
arch/x86_64/ia32/audit.c
arch/x86_64/kernel/audit.c
arch/xtensa/kernel/ptrace.c
drivers/block/cciss.c
drivers/block/floppy.c
drivers/char/ipmi/ipmi_msghandler.c
drivers/char/synclink_gt.c
drivers/char/watchdog/sbc8360.c
drivers/ide/ide-proc.c
drivers/ide/pci/aec62xx.c
drivers/ide/pci/alim15x3.c
drivers/ide/pci/serverworks.c
drivers/ide/pci/sgiioc4.c
drivers/ide/pci/siimage.c
drivers/ide/pci/sis5513.c
drivers/infiniband/hw/mthca/mthca_allocator.c
drivers/macintosh/via-pmu-backlight.c
drivers/macintosh/via-pmu.c
drivers/md/raid1.c
drivers/media/Kconfig
drivers/media/common/saa7146_video.c
drivers/media/dvb/b2c2/Kconfig
drivers/media/dvb/bt8xx/Kconfig
drivers/media/dvb/dvb-usb/Kconfig
drivers/media/dvb/frontends/Kconfig
drivers/media/dvb/frontends/Makefile
drivers/media/dvb/pluto2/Kconfig
drivers/media/dvb/ttpci/Kconfig
drivers/media/dvb/ttusb-budget/Kconfig
drivers/media/video/Kconfig
drivers/media/video/bt8xx/bttv-input.c
drivers/media/video/cx88/Kconfig
drivers/media/video/saa7134/Kconfig
drivers/media/video/tuner-types.c
drivers/media/video/zoran.h
drivers/media/video/zoran_driver.c
drivers/mmc/imxmmc.c
drivers/mmc/mmc.c
drivers/mmc/mmc_block.c
drivers/net/Kconfig
drivers/net/dm9000.c
drivers/pci/quirks.c
drivers/s390/block/dasd.c
drivers/s390/block/dasd_genhd.c
drivers/s390/cio/ccwgroup.c
drivers/s390/cio/chsc.c
drivers/s390/cio/device.c
drivers/s390/cio/device_fsm.c
drivers/s390/cio/device_pgid.c
drivers/scsi/ata_piix.c
drivers/scsi/libata-core.c
drivers/scsi/sata_mv.c
drivers/scsi/sata_via.c
drivers/scsi/scsi_error.c
drivers/serial/8250_pci.c
drivers/serial/serial_core.c
drivers/serial/sh-sci.c
drivers/usb/gadget/ether.c
drivers/usb/host/uhci-q.c
drivers/usb/input/hid-core.c
drivers/usb/input/usbtouchscreen.c
drivers/usb/input/yealink.c
drivers/usb/misc/sisusbvga/sisusb.c
drivers/usb/net/pegasus.h
drivers/usb/net/rtl8150.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio.h
drivers/usb/serial/usb-serial.c
drivers/usb/storage/unusual_devs.h
drivers/video/aty/aty128fb.c
drivers/video/aty/atyfb_base.c
drivers/video/aty/radeon_backlight.c
drivers/video/nvidia/nv_backlight.c
drivers/video/riva/fbdev.c
fs/cifs/readdir.c
fs/ext3/inode.c
fs/jbd/transaction.c
fs/nfs/direct.c
fs/nfs/read.c
fs/nfs/write.c
fs/super.c
fs/xfs/linux-2.6/xfs_aops.c
fs/xfs/linux-2.6/xfs_lrw.c
fs/xfs/quota/xfs_qm_bhv.c
fs/xfs/xfs_alloc.h
fs/xfs/xfs_fsops.c
fs/xfs/xfs_mount.c
fs/xfs/xfs_vfsops.c
include/asm-arm/arch-s3c2410/anubis-cpld.h
include/asm-arm/arch-s3c2410/anubis-irq.h
include/asm-arm/arch-s3c2410/anubis-map.h
include/asm-arm/arch-s3c2410/audio.h
include/asm-arm/arch-s3c2410/bast-cpld.h
include/asm-arm/arch-s3c2410/bast-irq.h
include/asm-arm/arch-s3c2410/bast-map.h
include/asm-arm/arch-s3c2410/bast-pmu.h
include/asm-arm/arch-s3c2410/debug-macro.S
include/asm-arm/arch-s3c2410/dma.h
include/asm-arm/arch-s3c2410/fb.h
include/asm-arm/arch-s3c2410/hardware.h
include/asm-arm/arch-s3c2410/idle.h
include/asm-arm/arch-s3c2410/iic.h
include/asm-arm/arch-s3c2410/io.h
include/asm-arm/arch-s3c2410/irqs.h
include/asm-arm/arch-s3c2410/map.h
include/asm-arm/arch-s3c2410/memory.h
include/asm-arm/arch-s3c2410/nand.h
include/asm-arm/arch-s3c2410/osiris-map.h
include/asm-arm/arch-s3c2410/regs-adc.h
include/asm-arm/arch-s3c2410/regs-clock.h
include/asm-arm/arch-s3c2410/regs-gpio.h
include/asm-arm/arch-s3c2410/regs-gpioj.h
include/asm-arm/arch-s3c2410/regs-iic.h
include/asm-arm/arch-s3c2410/regs-iis.h
include/asm-arm/arch-s3c2410/regs-irq.h
include/asm-arm/arch-s3c2410/regs-lcd.h
include/asm-arm/arch-s3c2410/regs-mem.h
include/asm-arm/arch-s3c2410/regs-nand.h
include/asm-arm/arch-s3c2410/regs-rtc.h
include/asm-arm/arch-s3c2410/regs-sdi.h
include/asm-arm/arch-s3c2410/regs-serial.h
include/asm-arm/arch-s3c2410/regs-spi.h
include/asm-arm/arch-s3c2410/regs-timer.h
include/asm-arm/arch-s3c2410/regs-udc.h
include/asm-arm/arch-s3c2410/regs-watchdog.h
include/asm-arm/arch-s3c2410/system.h
include/asm-arm/arch-s3c2410/timex.h
include/asm-arm/arch-s3c2410/uncompress.h
include/asm-arm/arch-s3c2410/usb-control.h
include/asm-arm/arch-s3c2410/vmalloc.h
include/asm-arm/arch-s3c2410/vr1000-cpld.h
include/asm-arm/arch-s3c2410/vr1000-irq.h
include/asm-arm/arch-s3c2410/vr1000-map.h
include/asm-arm/cacheflush.h
include/asm-arm/spinlock.h
include/asm-generic/Kbuild.asm
include/asm-generic/audit_read.h [new file with mode: 0644]
include/asm-generic/audit_write.h [new file with mode: 0644]
include/asm-i386/Kbuild
include/asm-i386/elf.h
include/asm-i386/mach-default/mach_mpspec.h
include/asm-i386/rwlock.h
include/asm-i386/setup.h
include/asm-i386/signal.h
include/asm-ia64/mman.h
include/asm-ia64/unistd.h
include/asm-mips/page.h
include/asm-powerpc/eeh.h
include/asm-powerpc/futex.h
include/asm-powerpc/io.h
include/asm-powerpc/kdump.h
include/asm-powerpc/paca.h
include/asm-powerpc/spinlock.h
include/asm-ppc/io.h
include/asm-sh/page.h
include/asm-sh64/bug.h
include/asm-sh64/byteorder.h
include/asm-sh64/dma-mapping.h
include/asm-sh64/io.h
include/asm-sh64/ptrace.h
include/asm-sh64/system.h
include/asm-sh64/uaccess.h
include/asm-sparc/mman.h
include/asm-sparc64/mman.h
include/linux/atmdev.h
include/linux/audit.h
include/linux/delayacct.h
include/linux/hrtimer.h
include/linux/ktime.h
include/linux/mmc/host.h
include/linux/mmc/mmc.h
include/linux/mmzone.h
include/linux/nfs_fs.h
include/linux/nfs_xdr.h
include/linux/pci_ids.h
include/linux/sched.h
include/linux/timex.h
include/linux/videodev.h
include/linux/videodev2.h
include/media/v4l2-dev.h
kernel/audit.c
kernel/audit.h
kernel/auditfilter.c
kernel/auditsc.c
kernel/delayacct.c
kernel/exit.c
kernel/fork.c
kernel/futex.c
kernel/irq/handle.c
kernel/lockdep_internals.h
kernel/panic.c
kernel/power/Kconfig
kernel/rcupdate.c
kernel/spinlock.c
lib/Kconfig
lib/Makefile
lib/audit.c [new file with mode: 0644]
mm/mempolicy.c
mm/mempool.c
mm/mmap.c
mm/truncate.c
mm/vmstat.c
net/ipv4/ip_output.c
net/ipv6/exthdrs.c
net/socket.c
scripts/hdrcheck.sh
sound/oss/Kconfig
sound/pci/ac97/ac97_codec.c

index 2cd7f02..d42ab4c 100644 (file)
@@ -308,6 +308,8 @@ then you just add a line saying
 
        Signed-off-by: Random J Developer <random@developer.example.org>
 
+using your real name (sorry, no pseudonyms or anonymous contributions.)
+
 Some people also put extra tags at the end.  They'll just be ignored for
 now, but you can do this to mark internal company procedures or just
 point out some special detail about the sign-off. 
index 1537842..9c629ff 100644 (file)
@@ -20,6 +20,7 @@ This driver is known to work with the following cards:
        * SA P400i
        * SA E200
        * SA E200i
+       * SA E500
 
 If nodes are not already created in the /dev/cciss directory, run as root:
 
index 87851ef..d1cd5f9 100644 (file)
@@ -120,6 +120,13 @@ Who:    Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
+What:  drivers depending on OSS_OBSOLETE_DRIVER
+When:  options in 2.6.20, code in 2.6.22
+Why:   OSS drivers with ALSA replacements
+Who:   Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
 What:  pci_module_init(driver)
 When:  January 2007
 Why:   Is replaced by pci_register_driver(pci_driver).
index 10312be..c51314b 100644 (file)
@@ -181,6 +181,7 @@ filled out, however:
        5  ELILO
        7  GRuB
        8  U-BOOT
+       9  Xen
 
        Please contact <hpa@zytor.com> if you need a bootloader ID
        value assigned.
index df28c74..c04a421 100644 (file)
@@ -63,6 +63,10 @@ Offset       Type            Description
                                2 for bootsect-loader
                                3 for SYSLINUX
                                4 for ETHERBOOT
+                               5 for ELILO
+                               7 for GRuB
+                               8 for U-BOOT
+                               9 for Xen
                                V = version
 0x211  char            loadflags:
                        bit0 = 1: kernel is loaded high (bzImage)
index 33559b5..eab5a8c 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 18
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*
index 3594155..cf3fa5c 100644 (file)
@@ -621,9 +621,8 @@ CONFIG_AT91_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -956,9 +955,41 @@ CONFIG_USB_AT91=y
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
 CONFIG_MMC_AT91RM9200=y
 
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_AT91=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
 #
 # File systems
 #
index 0de639d..04661fe 100644 (file)
@@ -17,6 +17,7 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
index e2a2230..a29b3b2 100644 (file)
@@ -19,6 +19,7 @@
 
 #include <linux/module.h>
 #include <linux/reboot.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 
index 273e05f..0eadec9 100644 (file)
@@ -28,6 +28,7 @@ obj-$(CONFIG_PM_SIMTEC)               += pm-simtec.o
 
 # S3C2412 support
 obj-$(CONFIG_CPU_S3C2412)      += s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)      += s3c2412-irq.o
 obj-$(CONFIG_CPU_S3C2412)      += s3c2412-clock.o
 
 #
index b0ed9d2..be42e40 100644 (file)
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     24-Aug-2004 BJD  Start of generic S3C24XX support
- *     18-Oct-2004 BJD  Moved board struct into this file
- *     04-Jan-2005 BJD  New uart initialisation
- *     10-Jan-2005 BJD  Moved generic init here, specific to cpu headers
- *     14-Jan-2005 BJD  Added s3c24xx_init_clocks() call
- *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
- *     14-Mar-2005 BJD  Updated for __iomem
- *     15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
 */
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
index ad3845e..cae35ff 100644 (file)
@@ -1,22 +1,14 @@
 /* linux/arch/arm/mach-s3c2410/devs.c
  *
  * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ *     Ben Dooks <ben@simtec.co.uk>
  *
- * Base S3C2410 platform device definitions
+ * Base S3C24XX platform device definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
- *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
- *     10-Feb-2005 BJD  Added camera from guillaume.gourat@nexvision.tv
- *     29-Aug-2004 BJD  Added timers 0 through 3
- *     29-Aug-2004 BJD  Changed index of devices we only have one of to -1
- *     21-Aug-2004 BJD  Added IRQ_TICK to RTC resources
- *     18-Aug-2004 BJD  Created initial version
 */
 
 #include <linux/kernel.h>
index 2585545..cc92a7b 100644 (file)
@@ -60,7 +60,7 @@ static void __iomem *dma_base;
 static kmem_cache_t *dma_kmem;
 
 /* dma channel state information */
-s3c2410_dma_chan_t s3c2410_chans[S3C2410_DMA_CHANNELS];
+struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -74,7 +74,7 @@ s3c2410_dma_chan_t s3c2410_chans[S3C2410_DMA_CHANNELS];
 #define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
 #else
 static inline void
-dma_wrreg(s3c2410_dma_chan_t *chan, int reg, unsigned long val)
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
 {
        pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
        writel(val, dma_regaddr(chan, reg));
@@ -102,7 +102,7 @@ struct s3c2410_dma_regstate {
 */
 
 static void
-dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs)
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
 {
        regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
        regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
@@ -112,7 +112,7 @@ dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs)
 }
 
 static void
-dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan,
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
                 struct s3c2410_dma_regstate *regs)
 {
        printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
@@ -122,7 +122,7 @@ dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan,
 }
 
 static void
-dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan)
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
 {
        struct s3c2410_dma_regstate state;
 
@@ -136,7 +136,7 @@ dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan)
 }
 
 static void
-dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan)
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 {
        struct s3c2410_dma_regstate state;
 
@@ -164,7 +164,7 @@ dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan)
 */
 
 static void
-s3c2410_dma_stats_timeout(s3c2410_dma_stats_t *stats, int val)
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
 {
        if (stats == NULL)
                return;
@@ -183,7 +183,7 @@ s3c2410_dma_stats_timeout(s3c2410_dma_stats_t *stats, int val)
 */
 
 static int
-s3c2410_dma_waitforload(s3c2410_dma_chan_t *chan, int line)
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 {
        int timeout = chan->load_timeout;
        int took;
@@ -230,8 +230,8 @@ s3c2410_dma_waitforload(s3c2410_dma_chan_t *chan, int line)
 */
 
 static inline int
-s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan,
-                      s3c2410_dma_buf_t *buf)
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+                      struct s3c2410_dma_buf *buf)
 {
        unsigned long reload;
 
@@ -304,7 +304,7 @@ s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan,
 */
 
 static void
-s3c2410_dma_call_op(s3c2410_dma_chan_t *chan, s3c2410_chan_op_t op)
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
 {
        if (chan->op_fn != NULL) {
                (chan->op_fn)(chan, op);
@@ -318,8 +318,8 @@ s3c2410_dma_call_op(s3c2410_dma_chan_t *chan, s3c2410_chan_op_t op)
 */
 
 static inline void
-s3c2410_dma_buffdone(s3c2410_dma_chan_t *chan, s3c2410_dma_buf_t *buf,
-                    s3c2410_dma_buffresult_t result)
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+                    enum s3c2410_dma_buffresult result)
 {
        pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
                 chan->callback_fn, buf, buf->id, buf->size, result);
@@ -334,7 +334,7 @@ s3c2410_dma_buffdone(s3c2410_dma_chan_t *chan, s3c2410_dma_buf_t *buf,
  * start a dma channel going
 */
 
-static int s3c2410_dma_start(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
 {
        unsigned long tmp;
        unsigned long flags;
@@ -430,7 +430,7 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan)
 */
 
 static int
-s3c2410_dma_canload(s3c2410_dma_chan_t *chan)
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 {
        if (chan->load_state == S3C2410_DMALOAD_NONE ||
            chan->load_state == S3C2410_DMALOAD_1RUNNING)
@@ -460,8 +460,8 @@ s3c2410_dma_canload(s3c2410_dma_chan_t *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
                        dma_addr_t data, int size)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
-       s3c2410_dma_buf_t *buf;
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_buf *buf;
        unsigned long flags;
 
        check_channel(channel);
@@ -540,7 +540,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 static inline void
-s3c2410_dma_freebuf(s3c2410_dma_buf_t *buf)
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
 {
        int magicok = (buf->magic == BUF_MAGIC);
 
@@ -560,7 +560,7 @@ s3c2410_dma_freebuf(s3c2410_dma_buf_t *buf)
 */
 
 static inline void
-s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan)
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
 {
        pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
                 chan->number, chan->load_state);
@@ -601,8 +601,8 @@ s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan)
 static irqreturn_t
 s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
 {
-       s3c2410_dma_chan_t *chan = (s3c2410_dma_chan_t *)devpw;
-       s3c2410_dma_buf_t  *buf;
+       struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+       struct s3c2410_dma_buf  *buf;
 
        buf = chan->curr;
 
@@ -731,10 +731,10 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client,
+int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client,
                        void *dev)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
        unsigned long flags;
        int err;
 
@@ -807,9 +807,9 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client)
+int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
        unsigned long flags;
 
        check_channel(channel);
@@ -846,7 +846,7 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client)
 
 EXPORT_SYMBOL(s3c2410_dma_free);
 
-static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
 {
        unsigned long tmp;
        unsigned long flags;
@@ -880,7 +880,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
        return 0;
 }
 
-void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan)
+void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
 {
        unsigned long tmp;
        unsigned int timeout = 0x10000;
@@ -901,9 +901,9 @@ void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan)
  * stop the channel, and remove all current and pending transfers
 */
 
-static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
 {
-       s3c2410_dma_buf_t *buf, *next;
+       struct s3c2410_dma_buf *buf, *next;
        unsigned long flags;
 
        pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
@@ -958,7 +958,7 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
 }
 
 int
-s3c2410_dma_started(s3c2410_dma_chan_t *chan)
+s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 {
        unsigned long flags;
 
@@ -995,9 +995,9 @@ s3c2410_dma_started(s3c2410_dma_chan_t *chan)
 }
 
 int
-s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op)
+s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
        check_channel(channel);
 
@@ -1046,7 +1046,7 @@ int s3c2410_dma_config(dmach_t channel,
                       int xferunit,
                       int dcon)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
        pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
                 __FUNCTION__, channel, xferunit, dcon);
@@ -1086,7 +1086,7 @@ EXPORT_SYMBOL(s3c2410_dma_config);
 
 int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
        check_channel(channel);
 
@@ -1106,7 +1106,7 @@ EXPORT_SYMBOL(s3c2410_dma_setflags);
 
 int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
        check_channel(channel);
 
@@ -1121,7 +1121,7 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn);
 
 int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
        check_channel(channel);
 
@@ -1149,11 +1149,11 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 */
 
 int s3c2410_dma_devconfig(int channel,
-                         s3c2410_dmasrc_t source,
+                         enum s3c2410_dmasrc source,
                          int hwcfg,
                          unsigned long devaddr)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
        check_channel(channel);
 
@@ -1200,7 +1200,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
 {
-       s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+       struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
        check_channel(channel);
 
@@ -1222,7 +1222,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
 
 static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
 {
-       s3c2410_dma_chan_t *cp = container_of(dev, s3c2410_dma_chan_t, dev);
+       struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
 
        printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
 
@@ -1262,7 +1262,7 @@ static struct sysdev_class dma_sysclass = {
 
 static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
 {
-       memset(p, 0, sizeof(s3c2410_dma_buf_t));
+       memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
 
 
@@ -1270,7 +1270,7 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
 
 static int __init s3c2410_init_dma(void)
 {
-       s3c2410_dma_chan_t *cp;
+       struct s3c2410_dma_chan *cp;
        int channel;
        int ret;
 
@@ -1288,7 +1288,7 @@ static int __init s3c2410_init_dma(void)
                goto err;
        }
 
-       dma_kmem = kmem_cache_create("dma_desc", sizeof(s3c2410_dma_buf_t), 0,
+       dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
                                     SLAB_HWCACHE_ALIGN,
                                     s3c2410_dma_cache_ctor, NULL);
 
@@ -1301,7 +1301,7 @@ static int __init s3c2410_init_dma(void)
        for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
                cp = &s3c2410_chans[channel];
 
-               memset(cp, 0, sizeof(s3c2410_dma_chan_t));
+               memset(cp, 0, sizeof(struct s3c2410_dma_chan));
 
                /* dma channel irqs are in order.. */
                cp->number = channel;
index 6822dc7..cd6139b 100644 (file)
@@ -86,7 +86,7 @@ unsigned long s3c_irqwake_intmask     = 0xffffffffL;
 unsigned long s3c_irqwake_eintallow    = 0x0000fff0L;
 unsigned long s3c_irqwake_eintmask     = 0xffffffffL;
 
-static int
+int
 s3c_irq_wake(unsigned int irqno, unsigned int state)
 {
        unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
@@ -260,7 +260,7 @@ s3c_irqext_unmask(unsigned int irqno)
        s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23);
 }
 
-static int
+int
 s3c_irqext_type(unsigned int irq, unsigned int type)
 {
        void __iomem *extint_reg;
index 4abf0ca..f7cc4c9 100644 (file)
@@ -97,3 +97,8 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
                __raw_writel(parentmask, S3C2410_INTPND);
        }
 }
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);
index 947234d..2968fb2 100644 (file)
@@ -8,31 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     14-Sep-2004 BJD  USB power control
- *     20-Aug-2004 BJD  Added s3c2410_board struct
- *     18-Aug-2004 BJD  Added platform devices from default set
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to v2.6 kernel
- *     06-Jan-2003 BJD  Updates for <arch/map.h>
- *     18-Jan-2003 BJD  Added serial port configuration
- *     05-Oct-2004 BJD  Power management code
- *     04-Nov-2004 BJD  Updated serial port clocks
- *     04-Jan-2005 BJD  New uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Add support for muitlple NAND devices
- *     03-Mar-2005 BJD  Ensured that bast-cpld.h is included
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2005 BJD  Updated for __iomem changes
- *     22-Jun-2005 BJD  Added DM9000 platform information
- *     28-Jun-2005 BJD  Moved pm functionality out to common code
- *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
- *     25-Jul-2005 BJD  Removed ASIX static mappings
- *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
- *     20-Sep-2005 BJD  Added static to non-exported items
- *     26-Oct-2005 BJD  Added FB platform data
 */
 
 #include <linux/kernel.h>
index aec431b..8c895c0 100644 (file)
@@ -9,23 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to v2.6 kernel
- *     06-Jan-2003 BJD  Updates for <arch/map.h>
- *     18-Jan-2003 BJD  Added serial port configuration
- *     17-Feb-2003 BJD  Copied to mach-ipaq.c
- *     21-Aug-2004 BJD  Added struct s3c2410_board
- *     04-Sep-2004 BJD  Changed uart init, renamed ipaq_ -> h1940_
- *     18-Oct-2004 BJD  Updated new board structure name
- *     04-Nov-2004 BJD  Change for new serial clock
- *     04-Jan-2005 BJD  Updated uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Added clock init
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     20-Sep-2005 BJD  Added static to non-exported items
- *     26-Oct-2005 BJD  Changed name of fb init call
 */
 
 #include <linux/kernel.h>
index 306afc1..23d7c05 100644 (file)
@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     16-Sep-2004 BJD  Copied from mach-h1940.c
- *     25-Oct-2004 BJD  Updates for 2.6.10-rc1
- *     10-Jan-2005 BJD  Removed include of s3c2410.h s3c2440.h
- *     14-Jan-2005 BJD  Added new clock init
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2005 BJD  Fixed __iomem warnings
- *     20-Sep-2005 BJD  Added static to non-exported items
- *     31-Oct-2005 BJD  Added LCD setup for framebuffer
 */
 
 #include <linux/kernel.h>
index 25f7e9f..b3b0171 100644 (file)
  * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
  * Ben Dooks <ben@simtec.co.uk>
  *
- * 10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
- * 20-Sep-2005 BJD   Added static to non-exported items
- * 01-Apr-2006 BJD   Moved init code to common smdk
- *
  ***********************************************************************/
 
 #include <linux/kernel.h>
index b7ef7d3..3a4ca7f 100644 (file)
@@ -112,7 +112,20 @@ static void __init smdk2413_machine_init(void)
        smdk_machine_init();
 }
 
-MACHINE_START(S3C2413, "SMDK2413")
+MACHINE_START(S3C2413, "S3C2413")
+       /* Maintainer: Ben Dooks <ben@fluff.org> */
+       .phys_io        = S3C2410_PA_UART,
+       .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+       .boot_params    = S3C2410_SDRAM_PA + 0x100,
+
+       .fixup          = smdk2413_fixup,
+       .init_irq       = s3c24xx_init_irq,
+       .map_io         = smdk2413_map_io,
+       .init_machine   = smdk2413_machine_init,
+       .timer          = &s3c24xx_timer,
+MACHINE_END
+
+MACHINE_START(SMDK2413, "SMDK2413")
        /* Maintainer: Ben Dooks <ben@fluff.org> */
        .phys_io        = S3C2410_PA_UART,
        .io_pg_offst    = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
index d18efb2..a0d7692 100644 (file)
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     14-Sep-2004 BJD  USB Power control
- *     04-Sep-2004 BJD  Added new uart init, and io init
- *     21-Aug-2004 BJD  Added struct s3c2410_board
- *     06-Aug-2004 BJD  Fixed call to time initialisation
- *     05-Apr-2004 BJD  Copied to make mach-vr1000.c
- *     18-Oct-2004 BJD  Updated board struct
- *     04-Nov-2004 BJD  Clock and serial configuration update
- *
- *     04-Jan-2005 BJD  Updated uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Added clock init
- *     15-Jan-2005 BJD  Add serial port device definition
- *     20-Jan-2005 BJD  Use UPF_IOREMAP for ports
- *     10-Feb-2005 BJD  Added power-off capability
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2006 BJD  void __iomem fixes
- *     22-Jun-2006 BJD  Added DM9000 platform information
- *     20-Sep-2005 BJD  Added static to non-exported items
 */
 
 #include <linux/kernel.h>
index 5127f39..f2a7817 100644 (file)
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog
- *     15-Jan-2006  LCVR  Splitted from gpio.c, adding support for the S3C2400
- */
+*/
 
 #include <linux/kernel.h>
 #include <linux/init.h>
index 73f1a24..fbed084 100644 (file)
@@ -9,14 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     18-Aug-2004 BJD  Created initial version
- *     20-Aug-2004 BJD  Added s3c2410_board struct
- *     04-Sep-2004 BJD  Added s3c2410_init_uarts() call
- *     17-Oct-2004 BJD  Moved board out to cpu
- *     04-Jan-2005 BJD  Changed uart init
- *     10-Jan-2005 BJD  Removed timer to cpu.h, moved 2410 specific bits here
- *     14-Jan-2005 BJD  Added s3c2410_init_clocks call
 */
 
 #ifdef CONFIG_CPU_S3C2410
diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2410/s3c2412-irq.c
new file mode 100644 (file)
index 0000000..c80ec93
--- /dev/null
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *     Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "irq.h"
+
+/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
+ * having them turn up in both the INT* and the EINT* registers. Whilst
+ * both show the status, they both now need to be acked when the IRQs
+ * go off.
+*/
+
+static void
+s3c2412_irq_mask(unsigned int irqno)
+{
+       unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+       unsigned long mask;
+
+       mask = __raw_readl(S3C2410_INTMSK);
+       __raw_writel(mask | bitval, S3C2410_INTMSK);
+
+       mask = __raw_readl(S3C2412_EINTMASK);
+       __raw_writel(mask | bitval, S3C2412_EINTMASK);
+}
+
+static inline void
+s3c2412_irq_ack(unsigned int irqno)
+{
+       unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+       __raw_writel(bitval, S3C2412_EINTPEND);
+       __raw_writel(bitval, S3C2410_SRCPND);
+       __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c2412_irq_maskack(unsigned int irqno)
+{
+       unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+       unsigned long mask;
+
+       mask = __raw_readl(S3C2410_INTMSK);
+       __raw_writel(mask|bitval, S3C2410_INTMSK);
+
+       mask = __raw_readl(S3C2412_EINTMASK);
+       __raw_writel(mask | bitval, S3C2412_EINTMASK);
+
+       __raw_writel(bitval, S3C2412_EINTPEND);
+       __raw_writel(bitval, S3C2410_SRCPND);
+       __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static void
+s3c2412_irq_unmask(unsigned int irqno)
+{
+       unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+       unsigned long mask;
+
+       mask = __raw_readl(S3C2412_EINTMASK);
+       __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
+
+       mask = __raw_readl(S3C2410_INTMSK);
+       __raw_writel(mask & ~bitval, S3C2410_INTMSK);
+}
+
+static struct irqchip s3c2412_irq_eint0t4 = {
+       .ack       = s3c2412_irq_ack,
+       .mask      = s3c2412_irq_mask,
+       .unmask    = s3c2412_irq_unmask,
+       .set_wake  = s3c_irq_wake,
+       .set_type  = s3c_irqext_type,
+};
+
+static int s3c2412_irq_add(struct sys_device *sysdev)
+{
+       unsigned int irqno;
+
+       for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+               set_irq_chip(irqno, &s3c2412_irq_eint0t4);
+               set_irq_handler(irqno, do_edge_IRQ);
+               set_irq_flags(irqno, IRQF_VALID);
+       }
+
+       return 0;
+}
+
+static struct sysdev_driver s3c2412_irq_driver = {
+       .add            = s3c2412_irq_add,
+};
+
+static int s3c2412_irq_init(void)
+{
+       return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
+}
+
+arch_initcall(s3c2412_irq_init);
index acfe387..1667ba1 100644 (file)
@@ -17,9 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *     25-Jul-2005 BJD         Split from irq.c
- *
 */
 
 #include <linux/init.h>
index 2aadca1..44c5aff 100644 (file)
@@ -17,9 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *     25-Jul-2005 BJD         Split from irq.c
- *
 */
 
 #include <linux/init.h>
@@ -122,21 +119,24 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
        return 0;
 }
 
-static struct sysdev_driver s3c244x_irq_driver = {
+static struct sysdev_driver s3c2440_irq_driver = {
        .add    = s3c244x_irq_add,
 };
 
 static int s3c2440_irq_init(void)
 {
-       return sysdev_driver_register(&s3c2440_sysclass, &s3c244x_irq_driver);
+       return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
 }
 
 arch_initcall(s3c2440_irq_init);
 
+static struct sysdev_driver s3c2442_irq_driver = {
+       .add    = s3c244x_irq_add,
+};
 
 static int s3c2442_irq_init(void)
 {
-       return sysdev_driver_register(&s3c2442_sysclass, &s3c244x_irq_driver);
+       return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
 }
 
 arch_initcall(s3c2442_irq_init);
index b103e56..d438ce4 100644 (file)
@@ -87,6 +87,32 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
        if (cache_is_vipt_aliasing())
                flush_pfn_alias(pfn, user_addr);
 }
+
+void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+                        unsigned long uaddr, void *kaddr,
+                        unsigned long len, int write)
+{
+       if (cache_is_vivt()) {
+               if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+                       unsigned long addr = (unsigned long)kaddr;
+                       __cpuc_coherent_kern_range(addr, addr + len);
+               }
+               return;
+       }
+
+       if (cache_is_vipt_aliasing()) {
+               flush_pfn_alias(page_to_pfn(page), uaddr);
+               return;
+       }
+
+       /* VIPT non-aliasing cache */
+       if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
+           vma->vm_flags | VM_EXEC) {
+               unsigned long addr = (unsigned long)kaddr;
+               /* only flushing the kernel mapping on non-aliasing VIPT */
+               __cpuc_coherent_kern_range(addr, addr + len);
+       }
+}
 #else
 #define flush_pfn_alias(pfn,vaddr)     do { } while (0)
 #endif
index 1e89d40..44a7a65 100644 (file)
@@ -480,7 +480,7 @@ __arm926_proc_info:
        b       __arm926_setup
        .long   cpu_arch_name
        .long   cpu_elf_name
-       .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+       .long   HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA
        .long   cpu_arm926_name
        .long   arm926_processor_functions
        .long   v4wbi_tlb_fns
index 5fbdf81..96fdf30 100644 (file)
@@ -156,7 +156,7 @@ struct vfp_single {
 };
 
 extern s32 vfp_get_float(unsigned int reg);
-extern void vfp_put_float(unsigned int reg, s32 val);
+extern void vfp_put_float(s32 val, unsigned int reg);
 
 /*
  * VFP_SINGLE_MANTISSA_BITS - number of bits in the mantissa
@@ -267,7 +267,7 @@ struct vfp_double {
  */
 #define VFP_REG_ZERO   16
 extern u64 vfp_get_double(unsigned int reg);
-extern void vfp_put_double(unsigned int reg, u64 val);
+extern void vfp_put_double(u64 val, unsigned int reg);
 
 #define VFP_DOUBLE_MANTISSA_BITS       (52)
 #define VFP_DOUBLE_EXPONENT_BITS       (11)
@@ -341,12 +341,6 @@ static inline int vfp_double_type(struct vfp_double *s)
 
 u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exceptions, const char *func);
 
-/*
- * System registers
- */
-extern u32 vfp_get_sys(unsigned int reg);
-extern void vfp_put_sys(unsigned int reg, u32 val);
-
 u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
 
 /*
index 04bd342..add48e3 100644 (file)
@@ -195,7 +195,7 @@ u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exce
                s64 d = vfp_double_pack(vd);
                pr_debug("VFP: %s: d(d%d)=%016llx exceptions=%08x\n", func,
                         dd, d, exceptions);
-               vfp_put_double(dd, d);
+               vfp_put_double(d, dd);
        }
        return exceptions;
 }
@@ -250,19 +250,19 @@ vfp_propagate_nan(struct vfp_double *vdd, struct vfp_double *vdn,
  */
 static u32 vfp_double_fabs(int dd, int unused, int dm, u32 fpscr)
 {
-       vfp_put_double(dd, vfp_double_packed_abs(vfp_get_double(dm)));
+       vfp_put_double(vfp_double_packed_abs(vfp_get_double(dm)), dd);
        return 0;
 }
 
 static u32 vfp_double_fcpy(int dd, int unused, int dm, u32 fpscr)
 {
-       vfp_put_double(dd, vfp_get_double(dm));
+       vfp_put_double(vfp_get_double(dm), dd);
        return 0;
 }
 
 static u32 vfp_double_fneg(int dd, int unused, int dm, u32 fpscr)
 {
-       vfp_put_double(dd, vfp_double_packed_negate(vfp_get_double(dm)));
+       vfp_put_double(vfp_double_packed_negate(vfp_get_double(dm)), dd);
        return 0;
 }
 
@@ -287,7 +287,7 @@ static u32 vfp_double_fsqrt(int dd, int unused, int dm, u32 fpscr)
                        vdp = &vfp_double_default_qnan;
                        ret = FPSCR_IOC;
                }
-               vfp_put_double(dd, vfp_double_pack(vdp));
+               vfp_put_double(vfp_double_pack(vdp), dd);
                return ret;
        }
 
@@ -476,7 +476,7 @@ static u32 vfp_double_fcvts(int sd, int unused, int dm, u32 fpscr)
        return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, "fcvts");
 
  pack_nan:
-       vfp_put_float(sd, vfp_single_pack(&vsd));
+       vfp_put_float(vfp_single_pack(&vsd), sd);
        return exceptions;
 }
 
@@ -573,7 +573,7 @@ static u32 vfp_double_ftoui(int sd, int unused, int dm, u32 fpscr)
 
        pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-       vfp_put_float(sd, d);
+       vfp_put_float(d, sd);
 
        return exceptions;
 }
@@ -648,7 +648,7 @@ static u32 vfp_double_ftosi(int sd, int unused, int dm, u32 fpscr)
 
        pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-       vfp_put_float(sd, (s32)d);
+       vfp_put_float((s32)d, sd);
 
        return exceptions;
 }
@@ -1084,7 +1084,7 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr)
  vdn_nan:
        exceptions = vfp_propagate_nan(&vdd, &vdn, &vdm, fpscr);
  pack:
-       vfp_put_double(dd, vfp_double_pack(&vdd));
+       vfp_put_double(vfp_double_pack(&vdd), dd);
        return exceptions;
 
  vdm_nan:
@@ -1104,7 +1104,7 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr)
        goto pack;
 
  invalid:
-       vfp_put_double(dd, vfp_double_pack(&vfp_double_default_qnan));
+       vfp_put_double(vfp_double_pack(&vfp_double_default_qnan), dd);
        return FPSCR_IOC;
 }
 
index eb683cd..e51e667 100644 (file)
@@ -178,12 +178,12 @@ vfp_get_float:
 
        .globl  vfp_put_float
 vfp_put_float:
-       add     pc, pc, r0, lsl #3
+       add     pc, pc, r1, lsl #3
        mov     r0, r0
        .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-       mcr     p10, 0, r1, c\dr, c0, 0 @ fmsr  r0, s0
+       mcr     p10, 0, r0, c\dr, c0, 0 @ fmsr  r0, s0
        mov     pc, lr
-       mcr     p10, 0, r1, c\dr, c0, 4 @ fmsr  r0, s1
+       mcr     p10, 0, r0, c\dr, c0, 4 @ fmsr  r0, s1
        mov     pc, lr
        .endr
 
@@ -203,9 +203,9 @@ vfp_get_double:
 
        .globl  vfp_put_double
 vfp_put_double:
-       add     pc, pc, r0, lsl #3
+       add     pc, pc, r2, lsl #3
        mov     r0, r0
        .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-       fmdrr   d\dr, r1, r2
+       fmdrr   d\dr, r0, r1
        mov     pc, lr
        .endr
index 78d7cac..8f6c179 100644 (file)
@@ -200,7 +200,7 @@ u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exce
                s32 d = vfp_single_pack(vs);
                pr_debug("VFP: %s: d(s%d)=%08x exceptions=%08x\n", func,
                         sd, d, exceptions);
-               vfp_put_float(sd, d);
+               vfp_put_float(d, sd);
        }
 
        return exceptions;
@@ -257,19 +257,19 @@ vfp_propagate_nan(struct vfp_single *vsd, struct vfp_single *vsn,
  */
 static u32 vfp_single_fabs(int sd, int unused, s32 m, u32 fpscr)
 {
-       vfp_put_float(sd, vfp_single_packed_abs(m));
+       vfp_put_float(vfp_single_packed_abs(m), sd);
        return 0;
 }
 
 static u32 vfp_single_fcpy(int sd, int unused, s32 m, u32 fpscr)
 {
-       vfp_put_float(sd, m);
+       vfp_put_float(m, sd);
        return 0;
 }
 
 static u32 vfp_single_fneg(int sd, int unused, s32 m, u32 fpscr)
 {
-       vfp_put_float(sd, vfp_single_packed_negate(m));
+       vfp_put_float(vfp_single_packed_negate(m), sd);
        return 0;
 }
 
@@ -333,7 +333,7 @@ static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr)
                        vsp = &vfp_single_default_qnan;
                        ret = FPSCR_IOC;
                }
-               vfp_put_float(sd, vfp_single_pack(vsp));
+               vfp_put_float(vfp_single_pack(vsp), sd);
                return ret;
        }
 
@@ -517,7 +517,7 @@ static u32 vfp_single_fcvtd(int dd, int unused, s32 m, u32 fpscr)
        return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fcvtd");
 
  pack_nan:
-       vfp_put_double(dd, vfp_double_pack(&vdd));
+       vfp_put_double(vfp_double_pack(&vdd), dd);
        return exceptions;
 }
 
@@ -613,7 +613,7 @@ static u32 vfp_single_ftoui(int sd, int unused, s32 m, u32 fpscr)
 
        pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-       vfp_put_float(sd, d);
+       vfp_put_float(d, sd);
 
        return exceptions;
 }
@@ -692,7 +692,7 @@ static u32 vfp_single_ftosi(int sd, int unused, s32 m, u32 fpscr)
 
        pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-       vfp_put_float(sd, (s32)d);
+       vfp_put_float((s32)d, sd);
 
        return exceptions;
 }
@@ -1127,7 +1127,7 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
  vsn_nan:
        exceptions = vfp_propagate_nan(&vsd, &vsn, &vsm, fpscr);
  pack:
-       vfp_put_float(sd, vfp_single_pack(&vsd));
+       vfp_put_float(vfp_single_pack(&vsd), sd);
        return exceptions;
 
  vsm_nan:
@@ -1147,7 +1147,7 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
        goto pack;
 
  invalid:
-       vfp_put_float(sd, vfp_single_pack(&vfp_single_default_qnan));
+       vfp_put_float(vfp_single_pack(&vfp_single_default_qnan), sd);
        return FPSCR_IOC;
 }
 
index 95a3892..a601a17 100644 (file)
@@ -29,6 +29,10 @@ config GENERIC_HARDIRQS
        bool
        default n
 
+config GENERIC_TIME
+       bool
+       default y
+
 config TIME_LOW_RES
        bool
        default y
index d5b64e1..68a77fe 100644 (file)
@@ -32,8 +32,6 @@
 
 #define TICK_SIZE (tick_nsec / 1000)
 
-extern unsigned long wall_jiffies;
-
 unsigned long __nongprelbss __clkin_clock_speed_HZ;
 unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
 unsigned long __nongprelbss __res_bus_clock_speed_HZ;
@@ -144,85 +142,6 @@ void time_init(void)
        time_divisor_init();
 }
 
-/*
- * This version of gettimeofday has near microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-       unsigned long seq;
-       unsigned long usec, sec;
-       unsigned long max_ntp_tick;
-
-       do {
-               unsigned long lost;
-
-               seq = read_seqbegin(&xtime_lock);
-
-               usec = 0;
-               lost = jiffies - wall_jiffies;
-
-               /*
-                * If time_adjust is negative then NTP is slowing the clock
-                * so make sure not to go into next possible interval.
-                * Better to lose some accuracy than have time go backwards..
-                */
-               if (unlikely(time_adjust < 0)) {
-                       max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
-                       usec = min(usec, max_ntp_tick);
-
-                       if (lost)
-                               usec += lost * max_ntp_tick;
-               }
-               else if (unlikely(lost))
-                       usec += lost * (USEC_PER_SEC / HZ);
-
-               sec = xtime.tv_sec;
-               usec += (xtime.tv_nsec / 1000);
-       } while (read_seqretry(&xtime_lock, seq));
-
-       while (usec >= 1000000) {
-               usec -= 1000000;
-               sec++;
-       }
-
-       tv->tv_sec = sec;
-       tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-       time_t wtm_sec, sec = tv->tv_sec;
-       long wtm_nsec, nsec = tv->tv_nsec;
-
-       if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-               return -EINVAL;
-
-       write_seqlock_irq(&xtime_lock);
-       /*
-        * This is revolting. We need to set "xtime" correctly. However, the
-        * value in this location is the value at the most recent update of
-        * wall time.  Discover what correction gettimeofday() would have
-        * made, and then undo it!
-        */
-       nsec -= 0 * NSEC_PER_USEC;
-       nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
-
-       wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-       wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-       set_normalized_timespec(&xtime, sec, nsec);
-       set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-       ntp_clear();
-       write_sequnlock_irq(&xtime_lock);
-       clock_was_set();
-       return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
index ab98fc2..5427a84 100644 (file)
@@ -39,7 +39,6 @@ obj-$(CONFIG_VM86)            += vm86.o
 obj-$(CONFIG_EARLY_PRINTK)     += early_printk.o
 obj-$(CONFIG_HPET_TIMER)       += hpet.o
 obj-$(CONFIG_K8_NB)            += k8.o
-obj-$(CONFIG_AUDIT)            += audit.o
 
 EXTRA_AFLAGS   := -traditional
 
diff --git a/arch/i386/kernel/audit.c b/arch/i386/kernel/audit.c
deleted file mode 100644 (file)
index 5a53c6f..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/audit.h>
-#include <asm/unistd.h>
-
-static unsigned dir_class[] = {
-#include <asm-generic/audit_dir_write.h>
-~0U
-};
-
-static unsigned chattr_class[] = {
-#include <asm-generic/audit_change_attr.h>
-~0U
-};
-
-static int __init audit_classes_init(void)
-{
-       audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
-       audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
-       return 0;
-}
-
-__initcall(audit_classes_init);
index c6737c3..17647a5 100644 (file)
@@ -35,7 +35,7 @@ static int __init init_hpet_clocksource(void)
        void __iomem* hpet_base;
        u64 tmp;
 
-       if (!hpet_address)
+       if (!is_hpet_enabled())
                return -ENODEV;
 
        /* calculate the hpet address: */
index 674de89..db274da 100644 (file)
@@ -75,6 +75,10 @@ config DMA_IS_NORMAL
        depends on IA64_SGI_SN2
        default y
 
+config AUDIT_ARCH
+       bool
+       default y
+
 choice
        prompt "System type"
        default IA64_GENERIC
index ab94f2e..92d7d0c 100644 (file)
@@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
+
+unsigned ia32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ia32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ia32_classify_syscall(unsigned syscall)
+{
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 1;
+       }
+}
index f251293..0468255 100644 (file)
@@ -8,19 +8,54 @@ static unsigned dir_class[] = {
 ~0U
 };
 
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
 static unsigned chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_IA32_SUPPORT
+       extern int ia32_classify_syscall(unsigned);
+       if (abi == AUDIT_ARCH_I386)
+               return ia32_classify_syscall(syscall);
+#endif
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_execve:
+               return 5;
+       default:
+               return 0;
+       }
+}
+
 static int __init audit_classes_init(void)
 {
 #ifdef CONFIG_IA32_SUPPORT
        extern __u32 ia32_dir_class[];
+       extern __u32 ia32_write_class[];
+       extern __u32 ia32_read_class[];
        extern __u32 ia32_chattr_class[];
+       audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
+       audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
        audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
        audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
 #endif
+       audit_register_class(AUDIT_CLASS_WRITE, write_class);
+       audit_register_class(AUDIT_CLASS_READ, read_class);
        audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
        audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
        return 0;
index 12701cf..fef0657 100644 (file)
@@ -1605,8 +1605,8 @@ sys_call_table:
        data8 sys_ni_syscall                    // 1295 reserved for ppoll
        data8 sys_unshare
        data8 sys_splice
-       data8 sys_set_robust_list
-       data8 sys_get_robust_list
+       data8 sys_ni_syscall                    // reserved for set_robust_list
+       data8 sys_ni_syscall                    // reserved for get_robust_list
        data8 sys_sync_file_range               // 1300
        data8 sys_tee
        data8 sys_vmsplice
index 29236f0..44d540e 100644 (file)
@@ -197,6 +197,11 @@ start_ap:
        ;;
        srlz.i
        ;;
+ {
+       flushrs                         // must be first insn in group
+       srlz.i
+ }
+       ;;
        /*
         * Save the region registers, predicate before they get clobbered
         */
index c7ccd6e..84a7e52 100644 (file)
@@ -4936,13 +4936,15 @@ abort_locked:
        if (likely(ctx)) {
                DPRINT(("context unlocked\n"));
                UNPROTECT_CTX(ctx, flags);
-               fput(file);
        }
 
        /* copy argument back to user, if needed */
        if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT;
 
 error_args:
+       if (file)
+               fput(file);
+
        kfree(args_k);
 
        DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret));
index 40722d8..9ef62a3 100644 (file)
@@ -163,10 +163,25 @@ sys_pipe (void)
        return retval;
 }
 
+int ia64_mmap_check(unsigned long addr, unsigned long len,
+               unsigned long flags)
+{
+       unsigned long roff;
+
+       /*
+        * Don't permit mappings into unmapped space, the virtual page table
+        * of a region, or across a region boundary.  Note: RGN_MAP_LIMIT is
+        * equal to 2^n-PAGE_SIZE (for some integer n <= 61) and len > 0.
+        */
+       roff = REGION_OFFSET(addr);
+       if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len)))
+               return -EINVAL;
+       return 0;
+}
+
 static inline unsigned long
 do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, unsigned long pgoff)
 {
-       unsigned long roff;
        struct file *file = NULL;
 
        flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
@@ -188,17 +203,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un
                goto out;
        }
 
-       /*
-        * Don't permit mappings into unmapped space, the virtual page table of a region,
-        * or across a region boundary.  Note: RGN_MAP_LIMIT is equal to 2^n-PAGE_SIZE
-        * (for some integer n <= 61) and len > 0.
-        */
-       roff = REGION_OFFSET(addr);
-       if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len))) {
-               addr = -EINVAL;
-               goto out;
-       }
-
        down_write(&current->mm->mmap_sem);
        addr = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
        up_write(&current->mm->mmap_sem);
index c119e8b..5f2dcba 100644 (file)
@@ -565,7 +565,7 @@ static void __init sn_init_pdas(char **cmdline_p)
  * Also sets up a few fields in the nodepda.  Also known as
  * platform_cpu_init() by the ia64 machvec code.
  */
-void __init sn_cpu_init(void)
+void __cpuinit sn_cpu_init(void)
 {
        int cpuid;
        int cpuphyid;
index c9dcec7..de1ef2f 100644 (file)
@@ -95,6 +95,10 @@ config GENERIC_TBSYNC
        default y if PPC32 && SMP
        default n
 
+config AUDIT_ARCH
+       bool
+       default y
+
 config DEFAULT_UIMAGE
        bool
        help
index e028a2e..6fd9e7a 100644 (file)
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Thu Jun 22 15:28:36 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:20:32 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -52,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -69,10 +72,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -119,7 +124,7 @@ CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_PPC_SYSTEMSIM=y
+CONFIG_UDBG_RTAS_CONSOLE=y
 # CONFIG_U3_DART is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
@@ -130,6 +135,7 @@ CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+# CONFIG_MPIC is not set
 
 #
 # Cell Broadband Engine options
@@ -154,6 +160,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -173,6 +180,7 @@ CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_ARCH_MEMORY_PROBE=y
 # CONFIG_PPC_64K_PAGES is not set
@@ -187,6 +195,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -235,6 +244,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -252,7 +263,10 @@ CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -336,6 +351,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -372,6 +388,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -449,8 +466,7 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -544,6 +560,7 @@ CONFIG_SPIDER_NET=m
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -620,6 +637,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -680,6 +698,7 @@ CONFIG_WATCHDOG_RTAS=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -725,6 +744,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -761,7 +781,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -787,6 +806,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -794,6 +814,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -841,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_INFINIBAND=y
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
@@ -856,6 +878,19 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -877,6 +912,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1034,6 +1070,9 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1046,14 +1085,19 @@ CONFIG_ZLIB_DEFLATE=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
index 0fa010a..bbf2b5f 100644 (file)
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Mon Jul  3 12:08:41 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:54 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -42,6 +43,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -59,6 +61,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -76,10 +79,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -126,7 +131,7 @@ CONFIG_PPC_CHRP=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_MPIC=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
 CONFIG_RTAS_PROC=y
@@ -136,6 +141,7 @@ CONFIG_PPC_MPC106=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -151,6 +157,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -162,6 +169,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -173,6 +181,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
@@ -366,6 +375,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -622,6 +632,7 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -751,6 +762,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -783,6 +795,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -894,12 +907,12 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
@@ -1079,7 +1092,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@@ -1305,6 +1318,7 @@ CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1316,14 +1330,19 @@ CONFIG_TEXTSEARCH_KMP=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
index 8c6bd17..4b9c2ed 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug  8 09:12:29 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:55 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -126,7 +126,6 @@ CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_U3_DART=y
-CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
@@ -146,6 +145,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_PMAC64=y
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -192,6 +192,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -772,7 +773,6 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -1195,7 +1195,6 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
index 72ed95b..eb0885e 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug  8 09:15:46 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:57 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -129,6 +129,7 @@ CONFIG_IBMVIO=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+# CONFIG_MPIC is not set
 
 #
 # Kernel options
@@ -172,6 +173,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -716,7 +718,6 @@ CONFIG_SERIAL_ICOM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
index 27b18ca..62ba660 100644 (file)
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:54 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:24:55 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -29,8 +32,10 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -48,11 +53,13 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -64,14 +71,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -82,7 +87,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -91,6 +95,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -116,14 +121,18 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_U3_DART=y
-CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -140,6 +149,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -155,6 +165,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -167,11 +178,12 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -197,6 +209,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -214,12 +228,18 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -274,6 +294,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -310,6 +331,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -484,6 +506,7 @@ CONFIG_TIGON3=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -556,6 +579,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -563,6 +587,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -586,7 +611,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -632,10 +657,10 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -654,9 +679,7 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -671,7 +694,6 @@ CONFIG_I2C_AMD8111=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -683,23 +705,22 @@ CONFIG_I2C_AMD8111=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -707,6 +728,7 @@ CONFIG_I2C_AMD8111=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -718,6 +740,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -735,6 +758,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -771,9 +795,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -786,15 +808,6 @@ CONFIG_USB_HIDINPUT=y
 #
 # CONFIG_USB_MDC800 is not set
 
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
 #
 # USB Network Adapters
 #
@@ -816,7 +829,7 @@ CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@@ -824,6 +837,7 @@ CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -848,12 +862,15 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 CONFIG_USB_EZUSB=y
 
@@ -867,10 +884,12 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -889,6 +908,19 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -898,6 +930,24 @@ CONFIG_USB_EZUSB=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -917,6 +967,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -949,7 +1000,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1067,6 +1117,7 @@ CONFIG_CRC_CCITT=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1079,14 +1130,20 @@ CONFIG_ZLIB_INFLATE=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1100,11 +1157,7 @@ CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 # CONFIG_IRQSTACKS is not set
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
index 15a50f4..719fba4 100644 (file)
@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sat May 27 18:45:55 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:26:55 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -29,6 +31,7 @@ CONFIG_CLASSIC32=y
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
@@ -39,6 +42,7 @@ CONFIG_PPC_FPU=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -56,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -70,10 +75,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -110,13 +117,16 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_ISERIES is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_APUS is not set
-CONFIG_MPIC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
+# CONFIG_PPC_TODC is not set
 # CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
 # CONFIG_CPCI690 is not set
@@ -146,6 +156,7 @@ CONFIG_MPC7448HPC2=y
 # CONFIG_EV64360 is not set
 CONFIG_TSI108_BRIDGE=y
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -160,6 +171,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -169,10 +181,10 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -180,10 +192,12 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_MPIC_WEIRD=y
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -221,6 +235,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -240,6 +256,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -247,6 +265,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -300,6 +319,7 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -336,6 +356,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -399,6 +420,7 @@ CONFIG_SCSI_SATA=y
 CONFIG_SCSI_SATA_MV=y
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
@@ -481,6 +503,9 @@ CONFIG_PHYLIB=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -538,7 +563,6 @@ CONFIG_8139TOO=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-CONFIG_TSI108_ETH=y
 
 #
 # Ethernet (10000 Mbit)
@@ -546,6 +570,7 @@ CONFIG_TSI108_ETH=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -645,6 +670,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -679,13 +705,13 @@ CONFIG_GEN_RTC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -697,6 +723,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -706,7 +733,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -762,6 +791,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -783,6 +825,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -884,6 +927,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -895,17 +939,13 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
 # CONFIG_UNWIND_INFO is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
index fc2d978..8da6a47 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Fri Jun 30 17:53:25 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:28:05 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -60,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -78,6 +79,7 @@ CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -120,6 +122,7 @@ CONFIG_PPC_GEN550=y
 # CONFIG_MPC834x_SYS is not set
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC834x=y
+# CONFIG_MPIC is not set
 
 #
 # Kernel options
@@ -148,7 +151,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -156,6 +158,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -401,6 +404,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -561,6 +565,7 @@ CONFIG_PHYLIB=y
 CONFIG_CICADA_PHY=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -905,6 +910,7 @@ CONFIG_VIDEO_V4L2=y
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1025,7 +1031,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@@ -1110,6 +1116,7 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 # CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
@@ -1226,7 +1233,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1279,11 +1285,13 @@ CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
index 5078b04..9eefab9 100644 (file)
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:56 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:28:54 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -27,17 +30,19 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
 # CONFIG_E200 is not set
-# CONFIG_E500 is not set
 CONFIG_6xx=y
 CONFIG_83xx=y
 CONFIG_PPC_FPU=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -55,9 +60,11 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -67,14 +74,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -85,7 +90,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
@@ -94,6 +98,8 @@ CONFIG_OBSOLETE_MODPARM=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -114,7 +120,9 @@ CONFIG_PPC_GEN550=y
 # Platform support
 #
 CONFIG_MPC834x_SYS=y
+# CONFIG_MPC834x_ITX is not set
 CONFIG_MPC834x=y
+# CONFIG_MPIC is not set
 
 #
 # Kernel options
@@ -129,6 +137,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -138,10 +147,10 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -149,12 +158,13 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCIEPORTBUS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -192,6 +202,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -209,12 +221,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -268,6 +286,7 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -304,6 +323,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -371,6 +391,9 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -433,6 +456,7 @@ CONFIG_GIANFAR=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -507,6 +531,7 @@ CONFIG_INPUT=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -543,6 +568,7 @@ CONFIG_83xx_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -589,10 +615,10 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -611,10 +637,8 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_M41T00 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -629,13 +653,13 @@ CONFIG_I2C_MPC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -664,10 +688,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -678,14 +704,11 @@ CONFIG_HWMON=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -695,7 +718,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -707,6 +732,7 @@ CONFIG_HWMON=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -723,6 +749,19 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -732,6 +771,24 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -753,6 +810,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -781,7 +839,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -854,6 +911,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -865,15 +923,13 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_SERIAL_TEXT_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
index 7f0780f..67e7d0b 100644 (file)
@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Mon Mar 27 23:37:36 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:29:23 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -29,6 +31,7 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
@@ -39,6 +42,7 @@ CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -56,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -71,10 +76,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -103,15 +110,16 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
 # CONFIG_WANT_EARLY_SERIAL is not set
 
 #
 # Platform support
 #
 CONFIG_MPC8540_ADS=y
+# CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC8540=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -127,6 +135,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -136,16 +145,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -187,6 +197,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -204,12 +216,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -264,6 +282,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -295,6 +314,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -355,6 +375,9 @@ CONFIG_PHYLIB=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -464,6 +487,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -473,7 +497,6 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -496,13 +519,13 @@ CONFIG_GEN_RTC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -514,6 +537,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -523,7 +547,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -551,6 +577,19 @@ CONFIG_HWMON=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -559,6 +598,24 @@ CONFIG_HWMON=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -580,6 +637,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -677,6 +735,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -688,14 +747,19 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
@@ -706,11 +770,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
index 9bb022a..72edf9f 100644 (file)
@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Sun Apr  2 11:23:42 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:29:49 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -19,7 +21,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
@@ -29,6 +31,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
@@ -39,6 +42,7 @@ CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -56,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -71,10 +76,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -103,7 +110,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
 # CONFIG_WANT_EARLY_SERIAL is not set
 
 #
@@ -113,6 +119,7 @@ CONFIG_MPIC=y
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC8540=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -128,6 +135,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -137,21 +145,23 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
-CONFIG_PPC_I8259=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -190,6 +200,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -209,6 +221,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -216,6 +230,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -270,6 +285,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -306,6 +322,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -425,6 +442,9 @@ CONFIG_PHYLIB=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -470,6 +490,7 @@ CONFIG_GFAR_NAPI=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -568,6 +589,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -602,13 +624,13 @@ CONFIG_GEN_RTC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -620,6 +642,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -629,7 +652,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -663,6 +688,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_NEW_LEDS is not set
 
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -677,6 +710,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -698,6 +744,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -795,6 +842,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -806,14 +854,19 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
@@ -824,11 +877,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
index d7a30f9..92a527f 100644 (file)
@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Fri Jun 16 10:47:09 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:30:15 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -41,6 +43,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -58,6 +61,7 @@ CONFIG_LOCALVERSION=""
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -75,10 +79,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 # CONFIG_SLAB is not set
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_SLOB=y
@@ -107,9 +113,9 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_MPIC=y
 # CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
 
 #
 # Platform Support
@@ -131,6 +137,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -141,6 +148,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -151,11 +159,13 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -194,6 +204,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -212,6 +224,8 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -224,7 +238,10 @@ CONFIG_IPV6=y
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -279,6 +296,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -315,6 +333,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -383,6 +402,8 @@ CONFIG_PHYLIB=y
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -426,6 +447,7 @@ CONFIG_GIANFAR=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -500,6 +522,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -534,6 +557,7 @@ CONFIG_UNIX98_PTYS=y
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -579,6 +603,7 @@ CONFIG_I2C=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -615,7 +640,6 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -631,6 +655,7 @@ CONFIG_SENSORS_EEPROM=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -640,6 +665,7 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -648,6 +674,7 @@ CONFIG_SENSORS_EEPROM=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -703,6 +730,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -870,6 +910,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -881,13 +922,18 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
@@ -899,11 +945,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
index 3545af9..6861dde 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Mon Jul  3 14:20:49 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:30:23 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -60,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -128,7 +129,6 @@ CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_PPC_MPC106=y
@@ -149,6 +149,7 @@ CONFIG_CPU_FREQ_PMAC=y
 CONFIG_PPC601_SYNC_FIX=y
 # CONFIG_TAU is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -189,6 +190,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
@@ -559,6 +561,7 @@ CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -1502,7 +1505,6 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
@@ -1540,6 +1542,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
@@ -1557,7 +1560,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@@ -1728,7 +1731,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1831,11 +1833,13 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
index 395e498..7517d0c 100644 (file)
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Fri Feb 10 17:32:14 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:45:11 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -30,8 +33,10 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -49,11 +54,14 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -65,14 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -83,7 +89,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -92,6 +97,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+CONFIG_BLK_DEV_IO_TRACE=y
 
 #
 # IO Schedulers
@@ -117,19 +123,22 @@ CONFIG_PPC_PSERIES=y
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
-# CONFIG_PPC_CELL is not set
+CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_NATIVE=y
+CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_XICS=y
 CONFIG_U3_DART=y
-CONFIG_MPIC=y
 CONFIG_PPC_RTAS=y
 CONFIG_RTAS_ERROR_LOGGING=y
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 CONFIG_MPIC_BROKEN_U3=y
 CONFIG_IBMVIO=y
 # CONFIG_IBMEBUS is not set
 # CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -144,6 +153,15 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_PMAC64=y
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
+
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=m
+CONFIG_SPU_BASE=y
+CONFIG_SPUFS_MMAP=y
+CONFIG_CBE_RAS=y
 
 #
 # Kernel options
@@ -161,6 +179,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -181,9 +200,10 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
-# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MEMORY_HOTPLUG=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ARCH_MEMORY_PROBE=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -196,11 +216,12 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -247,7 +268,10 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -258,6 +282,9 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -284,6 +311,8 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_SIP=m
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -339,6 +368,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -376,6 +406,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -436,7 +467,6 @@ CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -497,6 +527,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
@@ -519,11 +550,10 @@ CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 CONFIG_SCSI_LPFC=m
@@ -540,8 +570,8 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=y
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -585,7 +615,6 @@ CONFIG_IEEE1394_OHCI1394=y
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
@@ -599,6 +628,7 @@ CONFIG_IEEE1394_RAWIO=y
 # Macintosh device drivers
 #
 CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
 CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
@@ -682,6 +712,7 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
+CONFIG_SPIDER_NET=m
 # CONFIG_MV643XX_ETH is not set
 
 #
@@ -691,6 +722,7 @@ CONFIG_TIGON3=y
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -792,6 +824,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -799,6 +832,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -814,7 +848,9 @@ CONFIG_SERIAL_ICOM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
+CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
 
 #
@@ -826,7 +862,7 @@ CONFIG_HVCS=m
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -874,10 +910,10 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -896,9 +932,7 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -913,7 +947,6 @@ CONFIG_I2C_POWERMAC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -925,38 +958,34 @@ CONFIG_I2C_POWERMAC=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -970,7 +999,6 @@ CONFIG_FB_MATROX_G=y
 CONFIG_FB_MATROX_I2C=m
 CONFIG_FB_MATROX_MAVEN=m
 CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
 CONFIG_FB_RADEON=y
 CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_RADEON_DEBUG is not set
@@ -1025,9 +1053,11 @@ CONFIG_SND_SEQ_DUMMY=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -1044,6 +1074,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
@@ -1057,6 +1088,18 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1076,6 +1119,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -1092,6 +1136,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
 
+#
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
 #
 # USB devices
 #
@@ -1108,6 +1163,7 @@ CONFIG_SND_POWERMAC_AUTO_DRC=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1125,6 +1181,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1135,7 +1192,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -1173,9 +1229,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1189,15 +1243,6 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
 #
 # USB Network Adapters
 #
@@ -1227,10 +1272,12 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1249,24 +1296,54 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 # CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 # CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_ISER=m
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
 #
 
 #
@@ -1298,7 +1375,6 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1307,6 +1383,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -1342,7 +1419,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1388,8 +1464,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1470,6 +1548,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1483,14 +1564,19 @@ CONFIG_OPROFILE=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1504,11 +1590,7 @@ CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_IRQSTACKS=y
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
index c18e860..a8cdf31 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug  8 09:14:48 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:45:12 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -128,7 +128,6 @@ CONFIG_PPC_PSERIES=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_XICS=y
 # CONFIG_U3_DART is not set
-CONFIG_MPIC=y
 CONFIG_PPC_RTAS=y
 CONFIG_RTAS_ERROR_LOGGING=y
 CONFIG_RTAS_PROC=y
@@ -140,6 +139,7 @@ CONFIG_IBMEBUS=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -196,6 +196,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -790,7 +791,6 @@ CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 # CONFIG_TIPAR is not set
index d2ab294..8b3f4fa 100644 (file)
@@ -70,6 +70,8 @@ obj-$(CONFIG_PCI)             += $(pci64-y) $(pci32-y)
 kexec-$(CONFIG_PPC64)          := machine_kexec_64.o
 kexec-$(CONFIG_PPC32)          := machine_kexec_32.o
 obj-$(CONFIG_KEXEC)            += machine_kexec.o crash.o $(kexec-y)
+obj-$(CONFIG_AUDIT)            += audit.o
+obj64-$(CONFIG_AUDIT)          += compat_audit.o
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 $(obj)/head_64.o: $(obj)/lparmap.s
diff --git a/arch/powerpc/kernel/audit.c b/arch/powerpc/kernel/audit.c
new file mode 100644 (file)
index 0000000..7fe5e63
--- /dev/null
@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_PPC64
+       extern int ppc32_classify_syscall(unsigned);
+       if (abi == AUDIT_ARCH_PPC)
+               return ppc32_classify_syscall(syscall);
+#endif
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 0;
+       }
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_PPC64
+       extern __u32 ppc32_dir_class[];
+       extern __u32 ppc32_write_class[];
+       extern __u32 ppc32_read_class[];
+       extern __u32 ppc32_chattr_class[];
+       audit_register_class(AUDIT_CLASS_WRITE_32, ppc32_write_class);
+       audit_register_class(AUDIT_CLASS_READ_32, ppc32_read_class);
+       audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ppc32_dir_class);
+       audit_register_class(AUDIT_CLASS_CHATTR_32, ppc32_chattr_class);
+#endif
+       audit_register_class(AUDIT_CLASS_WRITE, write_class);
+       audit_register_class(AUDIT_CLASS_READ, read_class);
+       audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+       audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+       return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/powerpc/kernel/compat_audit.c b/arch/powerpc/kernel/compat_audit.c
new file mode 100644 (file)
index 0000000..640d4bb
--- /dev/null
@@ -0,0 +1,38 @@
+#undef __powerpc64__
+#include <asm/unistd.h>
+
+unsigned ppc32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned ppc32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned ppc32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ppc32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ppc32_classify_syscall(unsigned syscall)
+{
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 1;
+       }
+}
index f04c18e..1af41f7 100644 (file)
@@ -295,7 +295,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
                struct irq_desc *desc = irq_desc + irq;
 
                if (desc->status & IRQ_INPROGRESS)
-                       desc->chip->end(irq);
+                       desc->chip->eoi(irq);
 
                if (!(desc->status & IRQ_DISABLED))
                        desc->chip->disable(irq);
index fc23040..f770805 100644 (file)
 
        .text
 
-#ifdef CONFIG_PPC64
-#define IN_SYNC                twi     0,r5,0; isync
-#define EIEIO_32
-#define SYNC_64                sync
-#else /* CONFIG_PPC32 */
-#define IN_SYNC
-#define EIEIO_32       eieio
-#define SYNC_64
-#endif
 /*
  * Returns (address we are running at) - (address we were linked at)
  * for use before the text and data are mapped to KERNELBASE.
@@ -70,6 +61,7 @@ _GLOBAL(add_reloc_offset)
  * The *_ns versions don't do byte-swapping.
  */
 _GLOBAL(_insb)
+       sync
        cmpwi   0,r5,0
        mtctr   r5
        subi    r4,r4,1
@@ -78,7 +70,8 @@ _GLOBAL(_insb)
        eieio
        stbu    r5,1(r4)
        bdnz    00b
-       IN_SYNC
+       twi     0,r5,0
+       isync
        blr
 
 _GLOBAL(_outsb)
@@ -86,14 +79,15 @@ _GLOBAL(_outsb)
        mtctr   r5
        subi    r4,r4,1
        blelr-
+       sync
 00:    lbzu    r5,1(r4)
        stb     r5,0(r3)
-       EIEIO_32
        bdnz    00b
-       SYNC_64
+       sync
        blr
 
 _GLOBAL(_insw)
+       sync
        cmpwi   0,r5,0
        mtctr   r5
        subi    r4,r4,2
@@ -102,7 +96,8 @@ _GLOBAL(_insw)
        eieio
        sthu    r5,2(r4)
        bdnz    00b
-       IN_SYNC
+       twi     0,r5,0
+       isync
        blr
 
 _GLOBAL(_outsw)
@@ -110,14 +105,15 @@ _GLOBAL(_outsw)
        mtctr   r5
        subi    r4,r4,2
        blelr-
+       sync
 00:    lhzu    r5,2(r4)
-       EIEIO_32
        sthbrx  r5,0,r3
        bdnz    00b
-       SYNC_64
+       sync
        blr
 
 _GLOBAL(_insl)
+       sync
        cmpwi   0,r5,0
        mtctr   r5
        subi    r4,r4,4
@@ -126,7 +122,8 @@ _GLOBAL(_insl)
        eieio
        stwu    r5,4(r4)
        bdnz    00b
-       IN_SYNC
+       twi     0,r5,0
+       isync
        blr
 
 _GLOBAL(_outsl)
@@ -134,17 +131,18 @@ _GLOBAL(_outsl)
        mtctr   r5
        subi    r4,r4,4
        blelr-
+       sync
 00:    lwzu    r5,4(r4)
        stwbrx  r5,0,r3
-       EIEIO_32
        bdnz    00b
-       SYNC_64
+       sync
        blr
 
 #ifdef CONFIG_PPC32
 _GLOBAL(__ide_mm_insw)
 #endif
 _GLOBAL(_insw_ns)
+       sync
        cmpwi   0,r5,0
        mtctr   r5
        subi    r4,r4,2
@@ -153,7 +151,8 @@ _GLOBAL(_insw_ns)
        eieio
        sthu    r5,2(r4)
        bdnz    00b
-       IN_SYNC
+       twi     0,r5,0
+       isync
        blr
 
 #ifdef CONFIG_PPC32
@@ -164,17 +163,18 @@ _GLOBAL(_outsw_ns)
        mtctr   r5
        subi    r4,r4,2
        blelr-
+       sync
 00:    lhzu    r5,2(r4)
        sth     r5,0(r3)
-       EIEIO_32
        bdnz    00b
-       SYNC_64
+       sync
        blr
 
 #ifdef CONFIG_PPC32
 _GLOBAL(__ide_mm_insl)
 #endif
 _GLOBAL(_insl_ns)
+       sync
        cmpwi   0,r5,0
        mtctr   r5
        subi    r4,r4,4
@@ -183,7 +183,8 @@ _GLOBAL(_insl_ns)
        eieio
        stwu    r5,4(r4)
        bdnz    00b
-       IN_SYNC
+       twi     0,r5,0
+       isync
        blr
 
 #ifdef CONFIG_PPC32
@@ -194,10 +195,10 @@ _GLOBAL(_outsl_ns)
        mtctr   r5
        subi    r4,r4,4
        blelr-
+       sync
 00:    lwzu    r5,4(r4)
        stw     r5,0(r3)
-       EIEIO_32
        bdnz    00b
-       SYNC_64
+       sync
        blr
 
index 8e43310..b637e81 100644 (file)
@@ -158,7 +158,7 @@ get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
 
        laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
        laddr[1] = laddr[2] = 0;
-       of_irq_map_raw(hosenode, &pin, laddr, &oirq);
+       of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
        DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
                        laddr[0], slot, pin, oirq.specifier[0]);
        return oirq.specifier[0];
index 829dace..ee3b223 100644 (file)
@@ -256,7 +256,7 @@ static struct pmf_handlers macio_mmio_handlers = {
        .write_reg32            = macio_do_write_reg32,
        .read_reg32             = macio_do_read_reg32,
        .write_reg8             = macio_do_write_reg8,
-       .read_reg32             = macio_do_read_reg8,
+       .read_reg             = macio_do_read_reg8,
        .read_reg32_msrx        = macio_do_read_reg32_msrx,
        .read_reg8_msrx         = macio_do_read_reg8_msrx,
        .write_reg32_slm        = macio_do_write_reg32_slm,
index 060789e..39f7ddb 100644 (file)
@@ -87,8 +87,8 @@ static void __pmac_retrigger(unsigned int irq_nr)
 static void pmac_mask_and_ack_irq(unsigned int virq)
 {
        unsigned int src = irq_map[virq].hwirq;
-        unsigned long bit = 1UL << (virq & 0x1f);
-        int i = virq >> 5;
+        unsigned long bit = 1UL << (src & 0x1f);
+        int i = src >> 5;
         unsigned long flags;
 
        spin_lock_irqsave(&pmac_pic_lock, flags);
@@ -175,7 +175,7 @@ static void pmac_mask_irq(unsigned int virq)
 
        spin_lock_irqsave(&pmac_pic_lock, flags);
         __clear_bit(src, ppc_cached_irq_mask);
-        __pmac_set_irq_mask(src, 0);
+        __pmac_set_irq_mask(src, 1);
        spin_unlock_irqrestore(&pmac_pic_lock, flags);
 }
 
index e32fadd..03b4477 100644 (file)
@@ -139,6 +139,7 @@ wait_more:
 
 static void dart_flush(struct iommu_table *tbl)
 {
+       mb();
        if (dart_dirty) {
                dart_tlb_invalidate_all();
                dart_dirty = 0;
@@ -172,9 +173,13 @@ static void dart_build(struct iommu_table *tbl, long index,
                uaddr += DART_PAGE_SIZE;
        }
 
+       /* make sure all updates have reached memory */
+       mb();
+       in_be32((unsigned __iomem *)dp);
+       mb();
+
        if (dart_is_u4) {
                rpn = index;
-               mb(); /* make sure all updates have reached memory */
                while (npages--)
                        dart_tlb_invalidate_one(rpn++);
        } else {
index 4d33bee..0aa3331 100644 (file)
@@ -1,56 +1,63 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Wed Jul 13 13:34:24 2005
+# Linux kernel version: 2.6.18-rc6
+# Wed Sep  6 15:09:32 2006
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
-CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION="-prep"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -58,69 +65,68 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
 #
 # Processor
 #
 CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
 # CONFIG_E200 is not set
 # CONFIG_E500 is not set
 CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
+# CONFIG_ALTIVEC is not set
+# CONFIG_TAU is not set
 # CONFIG_KEXEC is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PMAC=y
+# CONFIG_CPU_FREQ is not set
 CONFIG_PPC601_SYNC_FIX=y
-CONFIG_PM=y
+# CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_PPC_STD_MMU=y
 
 #
 # Platform options
 #
-CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_PPC_PREP=y
 # CONFIG_APUS is not set
 # CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
 # CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
 # CONFIG_POWERPMC250 is not set
 # CONFIG_CHESTNUT is not set
 # CONFIG_SPRUCE is not set
 # CONFIG_HDPU is not set
 # CONFIG_EV64260 is not set
 # CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
 # CONFIG_MVME5100 is not set
 # CONFIG_PPLUS is not set
 # CONFIG_PRPMC750 is not set
 # CONFIG_PRPMC800 is not set
 # CONFIG_SANDPOINT is not set
 # CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
 # CONFIG_EST8260 is not set
@@ -132,10 +138,7 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PQ2FADS is not set
 # CONFIG_LITE5200 is not set
 # CONFIG_MPC834x_SYS is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
+# CONFIG_EV64360 is not set
 CONFIG_PPCBUG_NVRAM=y
 # CONFIG_SMP is not set
 # CONFIG_HIGHMEM is not set
@@ -152,12 +155,16 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_PROC_DEVICETREE=y
 CONFIG_PREP_RESIDUAL=y
 CONFIG_PROC_PREPRESIDUAL=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_SOFTWARE_SUSPEND=y
 CONFIG_PM_STD_PARTITION=""
@@ -169,10 +176,10 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_I8259=y
+CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -187,6 +194,11 @@ CONFIG_CARDBUS=y
 # PC-card bridges
 #
 CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
 CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=m
 
@@ -212,6 +224,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -229,9 +242,11 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -240,80 +255,77 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+
 #
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_CONNTRACK=m
 # CONFIG_IP_NF_CT_ACCT is not set
 CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
 # CONFIG_IP_NF_CT_PROTO_SCTP is not set
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -326,6 +338,10 @@ CONFIG_IP_NF_ARPTABLES=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -333,13 +349,11 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -352,6 +366,12 @@ CONFIG_NET_POLL_CONTROLLER=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -367,6 +387,7 @@ CONFIG_PARPORT_SERIAL=m
 CONFIG_PARPORT_PC_FIFO=y
 CONFIG_PARPORT_PC_SUPERIO=y
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
 
 #
@@ -378,7 +399,6 @@ CONFIG_PARPORT_1284=y
 # Block devices
 #
 CONFIG_BLK_DEV_FD=m
-CONFIG_MAC_FLOPPY=m
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
@@ -394,18 +414,9 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -422,7 +433,7 @@ CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 
@@ -435,7 +446,7 @@ CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -443,7 +454,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
 # CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
@@ -455,17 +466,12 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
 # CONFIG_IDE_ARM is not set
 # CONFIG_IDE_CHIPSETS is not set
 CONFIG_BLK_DEV_IDEDMA=y
@@ -476,6 +482,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -503,10 +510,12 @@ CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_7000FASST is not set
@@ -514,19 +523,16 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AHA1542 is not set
 # CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
@@ -545,19 +551,13 @@ CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
@@ -566,10 +566,6 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
-CONFIG_SCSI_MESH=y
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
-CONFIG_SCSI_MAC53C94=y
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -587,6 +583,7 @@ CONFIG_SCSI_MAC53C94=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -613,12 +610,9 @@ CONFIG_IEEE1394_OHCI1394=m
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
 
 #
 # I2O device support
@@ -628,18 +622,7 @@ CONFIG_IEEE1394_AMDTP=m
 #
 # Macintosh device drivers
 #
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_APM_EMU=y
-CONFIG_PMAC_MEDIABAY=y
-CONFIG_PMAC_BACKLIGHT=y
-CONFIG_ADB_MACIO=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_THERM_WINDTUNNEL=m
-CONFIG_THERM_ADT746X=m
-# CONFIG_ANSLCD is not set
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -655,16 +638,19 @@ CONFIG_TUN=m
 #
 # CONFIG_ARCNET is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_MACE=y
-# CONFIG_MACE_AAUI_PORT is not set
-CONFIG_BMAC=y
 # CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
@@ -682,6 +668,7 @@ CONFIG_TULIP_MMIO=y
 CONFIG_DE4X5=m
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
 # CONFIG_PCMCIA_XIRCOM is not set
 # CONFIG_PCMCIA_XIRTULIP is not set
 # CONFIG_AT1700 is not set
@@ -722,18 +709,21 @@ CONFIG_PCNET32=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -744,6 +734,7 @@ CONFIG_PCNET32=y
 # Wireless LAN (non-hamradio)
 #
 CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
 
 #
 # Obsolete Wireless cards support (pre-802.11)
@@ -755,11 +746,13 @@ CONFIG_NET_RADIO=y
 #
 # Wireless 802.11b ISA/PCI cards support
 #
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
 # CONFIG_AIRO is not set
 CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
 # CONFIG_PLX_HERMES is not set
 # CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
 # CONFIG_PCI_HERMES is not set
 # CONFIG_ATMEL is not set
 
@@ -767,6 +760,8 @@ CONFIG_APPLE_AIRPORT=m
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -783,11 +778,16 @@ CONFIG_PPP_ASYNC=y
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
@@ -835,7 +835,7 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_PCSPKR=m
 CONFIG_INPUT_UINPUT=m
 
 #
@@ -856,6 +856,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -863,7 +864,9 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -871,8 +874,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -890,6 +891,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -900,21 +902,15 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -938,19 +934,16 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_ELEKTOR is not set
-CONFIG_I2C_HYDRA=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_KEYWEST=m
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -959,7 +952,6 @@ CONFIG_I2C_KEYWEST=m
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -970,7 +962,6 @@ CONFIG_I2C_KEYWEST=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_M41T00 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -978,15 +969,21 @@ CONFIG_I2C_KEYWEST=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
@@ -996,38 +993,36 @@ CONFIG_I2C_KEYWEST=m
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-CONFIG_FB_CONTROL=y
-CONFIG_FB_PLATINUM=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_CT65550=y
+# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
+# CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
-CONFIG_FB_RIVA=y
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
@@ -1035,34 +1030,27 @@ CONFIG_FB_MATROX_G=y
 CONFIG_FB_MATROX_I2C=y
 CONFIG_FB_MATROX_MAVEN=m
 # CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=y
-CONFIG_FB_ATY=y
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_XL_INIT=y
-CONFIG_FB_ATY_GX=y
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-# CONFIG_FB_3DFX_ACCEL is not set
+# CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -1080,8 +1068,6 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # Sound
 #
 CONFIG_SOUND=m
-CONFIG_DMASOUND_PMAC=m
-CONFIG_DMASOUND=m
 
 #
 # Advanced Linux Sound Architecture
@@ -1096,10 +1082,13 @@ CONFIG_SND_SEQUENCER=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_PM=y
 
 #
 # Generic devices
@@ -1116,7 +1105,9 @@ CONFIG_SND_OPL3_LIB=m
 # ISA devices
 #
 CONFIG_SND_CS4231_LIB=m
+# CONFIG_SND_ADLIB is not set
 # CONFIG_SND_AD1848 is not set
+# CONFIG_SND_CMI8330 is not set
 # CONFIG_SND_CS4231 is not set
 CONFIG_SND_CS4232=m
 # CONFIG_SND_CS4236 is not set
@@ -1125,23 +1116,24 @@ CONFIG_SND_CS4232=m
 # CONFIG_SND_GUSCLASSIC is not set
 # CONFIG_SND_GUSEXTREME is not set
 # CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
 # CONFIG_SND_OPTI92X_AD1848 is not set
 # CONFIG_SND_OPTI92X_CS4231 is not set
 # CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
 # CONFIG_SND_SB8 is not set
 # CONFIG_SND_SB16 is not set
 # CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
 # CONFIG_SND_SGALAXY is not set
 # CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
 
 #
 # PCI devices
 #
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -1150,43 +1142,61 @@ CONFIG_SND_CS4232=m
 # CONFIG_SND_AU8830 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_ENS1370 is not set
 # CONFIG_SND_ENS1371 is not set
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
 # CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
 
 #
 # ALSA PowerMac devices
 #
-CONFIG_SND_POWERMAC=m
+
+#
+# Apple Onboard Audio driver
+#
+# CONFIG_SND_AOA is not set
+# CONFIG_SND_AOA_SOUNDBUS is not set
 
 #
 # USB devices
@@ -1204,6 +1214,7 @@ CONFIG_SND_USB_AUDIO=m
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1222,6 +1233,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1232,14 +1244,15 @@ CONFIG_USB_UHCI_HCD=m
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1251,12 +1264,15 @@ CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
@@ -1264,12 +1280,13 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1277,15 +1294,6 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
 #
 # USB Network Adapters
 #
@@ -1294,7 +1302,6 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB_PEGASUS=m
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_MON is not set
 
 #
@@ -1308,6 +1315,7 @@ CONFIG_USB_PEGASUS=m
 CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@@ -1315,6 +1323,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -1339,9 +1348,11 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
@@ -1359,10 +1370,12 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1381,13 +1394,44 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
 #
 
 #
@@ -1417,23 +1461,21 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1460,13 +1502,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1485,6 +1524,7 @@ CONFIG_CRAMFS=m
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
 
 #
 # Network File Systems
@@ -1513,6 +1553,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1532,6 +1573,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -1582,33 +1624,44 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
 # CONFIG_PROFILING is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_XMON is not set
 # CONFIG_BDI_SWITCH is not set
-CONFIG_BOOTX_TEXT=y
 
 #
 # Security options
index ae071a1..2f4f70c 100644 (file)
@@ -118,6 +118,10 @@ config SYSVIPC_COMPAT
        depends on COMPAT && SYSVIPC
        default y
 
+config AUDIT_ARCH
+       bool
+       default y
+
 comment "Code generation options"
 
 choice
index 86601a9..9a33ed6 100644 (file)
@@ -16,9 +16,11 @@ extra-y                              += head.o init_task.o vmlinux.lds
 obj-$(CONFIG_MODULES)          += s390_ksyms.o module.o
 obj-$(CONFIG_SMP)              += smp.o
 
+obj-$(CONFIG_AUDIT)            += audit.o
+compat-obj-$(CONFIG_AUDIT)     += compat_audit.o
 obj-$(CONFIG_COMPAT)           += compat_linux.o compat_signal.o \
                                        compat_wrapper.o compat_exec_domain.o \
-                                       binfmt_elf32.o
+                                       binfmt_elf32.o $(compat-obj-y)
 
 obj-$(CONFIG_VIRT_TIMER)       += vtime.o
 obj-$(CONFIG_STACKTRACE)       += stacktrace.o
diff --git a/arch/s390/kernel/audit.c b/arch/s390/kernel/audit.c
new file mode 100644 (file)
index 0000000..0741d91
--- /dev/null
@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_COMPAT
+       extern int s390_classify_syscall(unsigned);
+       if (abi == AUDIT_ARCH_S390)
+               return s390_classify_syscall(syscall);
+#endif
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 0;
+       }
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_COMPAT
+       extern __u32 s390_dir_class[];
+       extern __u32 s390_write_class[];
+       extern __u32 s390_read_class[];
+       extern __u32 s390_chattr_class[];
+       audit_register_class(AUDIT_CLASS_WRITE_32, s390_write_class);
+       audit_register_class(AUDIT_CLASS_READ_32, s390_read_class);
+       audit_register_class(AUDIT_CLASS_DIR_WRITE_32, s390_dir_class);
+       audit_register_class(AUDIT_CLASS_CHATTR_32, s390_chattr_class);
+#endif
+       audit_register_class(AUDIT_CLASS_WRITE, write_class);
+       audit_register_class(AUDIT_CLASS_READ, read_class);
+       audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+       audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+       return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/s390/kernel/compat_audit.c b/arch/s390/kernel/compat_audit.c
new file mode 100644 (file)
index 0000000..16d9436
--- /dev/null
@@ -0,0 +1,38 @@
+#undef __s390x__
+#include <asm/unistd.h>
+
+unsigned s390_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned s390_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned s390_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned s390_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int s390_classify_syscall(unsigned syscall)
+{
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 1;
+       }
+}
index 5d59e26..8372752 100644 (file)
@@ -88,30 +88,31 @@ __copy_to_user_asm:
         .globl __copy_in_user_asm
        # %r2 = from, %r3 = n, %r4 = to
 __copy_in_user_asm:
+       ahi     %r3,-1
+       jo      6f
        sacf    256
-       bras    1,1f
-       mvc     0(1,%r4),0(%r2)
-0:     mvc     0(256,%r4),0(%r2)
-       la      %r2,256(%r2)
-       la      %r4,256(%r4)
-1:     ahi     %r3,-256
-       jnm     0b
-2:     ex      %r3,0(%r1)
-       sacf    0
-       slr     %r2,%r2
-       br      14
-3:     mvc     0(1,%r4),0(%r2)
+       bras    %r1,4f
+0:     ahi     %r3,257
+1:     mvc     0(1,%r4),0(%r2)
        la      %r2,1(%r2)
        la      %r4,1(%r4)
        ahi     %r3,-1
+       jnz     1b
+2:     lr      %r2,%r3
+       br      %r14
+3:     mvc     0(256,%r4),0(%r2)
+       la      %r2,256(%r2)
+       la      %r4,256(%r4)
+4:     ahi     %r3,-256
        jnm     3b
-4:     lr      %r2,%r3
+5:     ex      %r3,4(%r1)
        sacf    0
+6:     slr     %r2,%r2
        br      %r14
         .section __ex_table,"a"
-       .long   0b,3b
-       .long   2b,3b
-       .long   3b,4b
+       .long   1b,2b
+       .long   3b,0b
+       .long   5b,0b
         .previous
 
         .align 4
index 19b41a3..1f755be 100644 (file)
@@ -88,30 +88,31 @@ __copy_to_user_asm:
         .globl __copy_in_user_asm
        # %r2 = from, %r3 = n, %r4 = to
 __copy_in_user_asm:
+       aghi    %r3,-1
+       jo      6f
        sacf    256
-       bras    1,1f
-       mvc     0(1,%r4),0(%r2)
-0:     mvc     0(256,%r4),0(%r2)
-       la      %r2,256(%r2)
-       la      %r4,256(%r4)
-1:     aghi    %r3,-256
-       jnm     0b
-2:     ex      %r3,0(%r1)
-       sacf    0
-       slgr    %r2,%r2
-       br      14
-3:     mvc     0(1,%r4),0(%r2)
+       bras    %r1,4f
+0:     aghi    %r3,257
+1:     mvc     0(1,%r4),0(%r2)
        la      %r2,1(%r2)
        la      %r4,1(%r4)
        aghi    %r3,-1
+       jnz     1b
+2:     lgr     %r2,%r3
+       br      %r14
+3:     mvc     0(256,%r4),0(%r2)
+       la      %r2,256(%r2)
+       la      %r4,256(%r4)
+4:     aghi    %r3,-256
        jnm     3b
-4:     lgr     %r2,%r3
+5:     ex      %r3,4(%r1)
        sacf    0
-       br      %r14
+6:     slgr    %r2,%r2
+       br      14
         .section __ex_table,"a"
-       .quad   0b,3b
-       .quad   2b,3b
-       .quad   3b,4b
+       .quad   1b,2b
+       .quad   3b,0b
+       .quad   5b,0b
         .previous
 
         .align 4
index 8ca57ff..ebf2004 100644 (file)
@@ -26,7 +26,6 @@ LDFLAGS                       += -EB  -mshelf32_linux
 endif
 
 # No requirements for endianess support from AFLAGS, 'as' always run through gcc
-AFLAGS         += -m5 -isa=sh64 -traditional
 CFLAGS         += $(cpu-y)
 
 LDFLAGS_vmlinux        += --defsym phys_stext=_stext-$(CONFIG_CACHED_MEMORY_OFFSET) \
index dba8e14..db475b7 100644 (file)
@@ -355,6 +355,9 @@ void machine_power_off(void)
        enter_deep_standby();
 }
 
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
 void show_regs(struct pt_regs * regs)
 {
        unsigned long long ah, al, bh, bl, ch, cl;
index d84895d..3ed87cd 100644 (file)
@@ -112,8 +112,10 @@ struct resource io_resources[] = {
 };
 
 struct resource kram_resources[] = {
-       { "Kernel code", 0, 0 },        /* These must be last in the array */
-       { "Kernel data", 0, 0 }         /* These must be last in the array */
+       /* These must be last in the array */
+       { .name = "Kernel code", .start = 0, .end = 0 },
+       /* These must be last in the array */
+       { .name = "Kernel data", .start = 0, .end = 0 }
 };
 
 struct resource xram_resources[] = {
index fb1866f..80c5675 100644 (file)
@@ -449,7 +449,9 @@ ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
                if (p + 32 >= e)        /* Better than nothing */
                        break;
                if ((nm = r->name) == 0) nm = "???";
-               p += sprintf(p, "%08lx-%08lx: %s\n", r->start, r->end, nm);
+               p += sprintf(p, "%08lx-%08lx: %s\n",
+                            (unsigned long)r->start,
+                            (unsigned long)r->end, nm);
        }
 
        return p-buf;
index a41c8a5..94ff58c 100644 (file)
@@ -219,6 +219,21 @@ out:
        return err;
 }
 
+int sparc_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
+{
+       if (ARCH_SUN4C_SUN4 &&
+           (len > 0x20000000 ||
+            ((flags & MAP_FIXED) &&
+             addr < 0xe0000000 && addr + len > 0x20000000)))
+               return -EINVAL;
+
+       /* See asm-sparc/uaccess.h */
+       if (len > TASK_SIZE - PAGE_SIZE || addr + len > TASK_SIZE - PAGE_SIZE)
+               return -EINVAL;
+
+       return 0;
+}
+
 /* Linux version of mmap */
 static unsigned long do_mmap2(unsigned long addr, unsigned long len,
        unsigned long prot, unsigned long flags, unsigned long fd,
@@ -233,25 +248,13 @@ static unsigned long do_mmap2(unsigned long addr, unsigned long len,
                        goto out;
        }
 
-       retval = -EINVAL;
        len = PAGE_ALIGN(len);
-       if (ARCH_SUN4C_SUN4 &&
-           (len > 0x20000000 ||
-            ((flags & MAP_FIXED) &&
-             addr < 0xe0000000 && addr + len > 0x20000000)))
-               goto out_putf;
-
-       /* See asm-sparc/uaccess.h */
-       if (len > TASK_SIZE - PAGE_SIZE || addr + len > TASK_SIZE - PAGE_SIZE)
-               goto out_putf;
-
        flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
 
        down_write(&current->mm->mmap_sem);
        retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
        up_write(&current->mm->mmap_sem);
 
-out_putf:
        if (file)
                fput(file);
 out:
index 8a36ba8..8d8ca71 100644 (file)
@@ -34,6 +34,10 @@ config ARCH_MAY_HAVE_PC_FDC
        bool
        default y
 
+config AUDIT_ARCH
+       bool
+       default y
+
 choice
        prompt "Kernel page size"
        default SPARC64_PAGE_SIZE_8KB
index 86c9fe3..e1eabeb 100644 (file)
@@ -25,6 +25,9 @@ obj-$(CONFIG_MODULES) += module.o
 obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o
 obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
 obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_AUDIT) += audit.o
+obj-$(CONFIG_AUDIT)$(CONFIG_SPARC32_COMPAT) += compat_audit.o
+obj-y += $(obj-yy)
 
 ifdef CONFIG_SUNOS_EMUL
   obj-y += sys_sunos32.o sunos_ioctl32.o
diff --git a/arch/sparc64/kernel/audit.c b/arch/sparc64/kernel/audit.c
new file mode 100644 (file)
index 0000000..aef19cc
--- /dev/null
@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_SPARC32_COMPAT
+       extern int sparc32_classify_syscall(unsigned);
+       if (abi == AUDIT_ARCH_SPARC)
+               return sparc32_classify_syscall(syscall);
+#endif
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 0;
+       }
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_SPARC32_COMPAT
+       extern __u32 sparc32_dir_class[];
+       extern __u32 sparc32_write_class[];
+       extern __u32 sparc32_read_class[];
+       extern __u32 sparc32_chattr_class[];
+       audit_register_class(AUDIT_CLASS_WRITE_32, sparc32_write_class);
+       audit_register_class(AUDIT_CLASS_READ_32, sparc32_read_class);
+       audit_register_class(AUDIT_CLASS_DIR_WRITE_32, sparc32_dir_class);
+       audit_register_class(AUDIT_CLASS_CHATTR_32, sparc32_chattr_class);
+#endif
+       audit_register_class(AUDIT_CLASS_WRITE, write_class);
+       audit_register_class(AUDIT_CLASS_READ, read_class);
+       audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+       audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+       return 0;
+}
+
+__initcall(audit_classes_init);
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
new file mode 100644 (file)
index 0000000..cca96c9
--- /dev/null
@@ -0,0 +1,37 @@
+#include <asm-sparc/unistd.h>
+
+unsigned sparc32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned sparc32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned sparc32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned sparc32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int sparc32_classify_syscall(unsigned syscall)
+{
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 1;
+       }
+}
index 054d0ab..bf5f14e 100644 (file)
@@ -548,6 +548,26 @@ asmlinkage long sparc64_personality(unsigned long personality)
        return ret;
 }
 
+int sparc64_mmap_check(unsigned long addr, unsigned long len,
+               unsigned long flags)
+{
+       if (test_thread_flag(TIF_32BIT)) {
+               if (len >= STACK_TOP32)
+                       return -EINVAL;
+
+               if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len)
+                       return -EINVAL;
+       } else {
+               if (len >= VA_EXCLUDE_START)
+                       return -EINVAL;
+
+               if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len))
+                       return -EINVAL;
+       }
+
+       return 0;
+}
+
 /* Linux version of mmap */
 asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
        unsigned long prot, unsigned long flags, unsigned long fd,
@@ -563,27 +583,11 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
        }
        flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
        len = PAGE_ALIGN(len);
-       retval = -EINVAL;
-
-       if (test_thread_flag(TIF_32BIT)) {
-               if (len >= STACK_TOP32)
-                       goto out_putf;
-
-               if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len)
-                       goto out_putf;
-       } else {
-               if (len >= VA_EXCLUDE_START)
-                       goto out_putf;
-
-               if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len))
-                       goto out_putf;
-       }
 
        down_write(&current->mm->mmap_sem);
        retval = do_mmap(file, addr, len, prot, flags, off);
        up_write(&current->mm->mmap_sem);
 
-out_putf:
        if (file)
                fput(file);
 out:
index 28df7d8..6cd4878 100644 (file)
@@ -85,6 +85,10 @@ config DMI
        bool
        default y
 
+config AUDIT_ARCH
+       bool
+       default y
+
 source "init/Kconfig"
 
 
index ab94f2e..92d7d0c 100644 (file)
@@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
+
+unsigned ia32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ia32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ia32_classify_syscall(unsigned syscall)
+{
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_socketcall:
+               return 4;
+       case __NR_execve:
+               return 5;
+       default:
+               return 1;
+       }
+}
index a067aa4..21f3338 100644 (file)
@@ -8,19 +8,54 @@ static unsigned dir_class[] = {
 ~0U
 };
 
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
 static unsigned chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_IA32_EMULATION
+       extern int ia32_classify_syscall(unsigned);
+       if (abi == AUDIT_ARCH_I386)
+               return ia32_classify_syscall(syscall);
+#endif
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+       case __NR_execve:
+               return 5;
+       default:
+               return 0;
+       }
+}
+
 static int __init audit_classes_init(void)
 {
 #ifdef CONFIG_IA32_EMULATION
        extern __u32 ia32_dir_class[];
+       extern __u32 ia32_write_class[];
+       extern __u32 ia32_read_class[];
        extern __u32 ia32_chattr_class[];
+       audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
+       audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
        audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
        audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
 #endif
+       audit_register_class(AUDIT_CLASS_WRITE, write_class);
+       audit_register_class(AUDIT_CLASS_READ, read_class);
        audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
        audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
        return 0;
index 5064d93..9aea23c 100644 (file)
@@ -212,7 +212,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
         */
        case PTRACE_KILL:
                ret = 0;
-               if (child->state == EXIT_ZOMBIE)        /* already dead */
+               if (child->exit_state == EXIT_ZOMBIE)   /* already dead */
                        break;
                child->exit_code = SIGKILL;
                child->ptrace &= ~PT_SINGLESTEP;
index 7b0eca7..2cd3391 100644 (file)
 #include <linux/completion.h>
 
 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 2.6.10)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,10)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.10)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,10)
 
 /* Embedded module documentation macros - see modules.h */
 MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.10");
+MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.10");
 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
-                       " SA6i P600 P800 P400 P400i E200 E200i");
+                       " SA6i P600 P800 P400 P400i E200 E200i E500");
 MODULE_LICENSE("GPL");
 
 #include "cciss_cmd.h"
@@ -82,6 +82,7 @@ static const struct pci_device_id cciss_pci_device_id[] = {
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3213},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3214},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
+       {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3233},
        {0,}
 };
 
@@ -110,6 +111,7 @@ static struct board_type products[] = {
        {0x3213103C, "Smart Array E200i", &SA5_access},
        {0x3214103C, "Smart Array E200i", &SA5_access},
        {0x3215103C, "Smart Array E200i", &SA5_access},
+       {0x3233103C, "Smart Array E500", &SA5_access},
 };
 
 /* How long to wait (in milliseconds) for board to go into simple mode */
index 5109fa3..ad1d706 100644 (file)
@@ -4177,6 +4177,11 @@ static int __init floppy_init(void)
        int i, unit, drive;
        int err, dr;
 
+#if defined(CONFIG_PPC_MERGE)
+       if (check_legacy_ioport(FDC1))
+               return -ENODEV;
+#endif
+
        raw_cmd = NULL;
 
        for (dr = 0; dr < N_DRIVE; dr++) {
@@ -4234,13 +4239,6 @@ static int __init floppy_init(void)
        }
 
        use_virtual_dma = can_use_virtual_dma & 1;
-#if defined(CONFIG_PPC_MERGE)
-       if (check_legacy_ioport(FDC1)) {
-               del_timer(&fd_timeout);
-               err = -ENODEV;
-               goto out_unreg_region;
-       }
-#endif
        fdc_state[0].address = FDC1;
        if (fdc_state[0].address == -1) {
                del_timer(&fd_timeout);
index 0aa5d60..843d34c 100644 (file)
@@ -3428,6 +3428,7 @@ struct ipmi_recv_msg *ipmi_alloc_recv_msg(void)
 
        rv = kmalloc(sizeof(struct ipmi_recv_msg), GFP_ATOMIC);
        if (rv) {
+               rv->user = NULL;
                rv->done = free_recv_msg;
                atomic_inc(&recv_msg_inuse_count);
        }
index b2dbbdb..2f07b08 100644 (file)
@@ -391,8 +391,8 @@ static MGSL_PARAMS default_params = {
 #define DESC_LIST_SIZE 4096
 
 #define MASK_PARITY  BIT1
-#define MASK_FRAMING BIT2
-#define MASK_BREAK   BIT3
+#define MASK_FRAMING BIT0
+#define MASK_BREAK   BIT14
 #define MASK_OVERRUN BIT4
 
 #define GSR   0x00 /* global status */
@@ -1800,17 +1800,17 @@ static void rx_async(struct slgt_info *info)
 
                        stat = 0;
 
-                       if ((status = *(p+1) & (BIT9 + BIT8))) {
-                               if (status & BIT9)
+                       if ((status = *(p+1) & (BIT1 + BIT0))) {
+                               if (status & BIT1)
                                        icount->parity++;
-                               else if (status & BIT8)
+                               else if (status & BIT0)
                                        icount->frame++;
                                /* discard char if tty control flags say so */
                                if (status & info->ignore_status_mask)
                                        continue;
-                               if (status & BIT9)
+                               if (status & BIT1)
                                        stat = TTY_PARITY;
-                               else if (status & BIT8)
+                               else if (status & BIT0)
                                        stat = TTY_FRAME;
                        }
                        if (tty) {
index 1035be5..41fc6f8 100644 (file)
@@ -200,7 +200,7 @@ static int wd_margin = 0xB;
 static int wd_multiplier = 2;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
-module_param(timeout, int, 27);
+module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout,
@@ -407,7 +407,7 @@ module_exit(sbc8360_exit);
 MODULE_AUTHOR("Ian E. Morgan <imorgan@webcon.ca>");
 MODULE_DESCRIPTION("SBC8360 watchdog driver");
 MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0");
+MODULE_VERSION("1.01");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 
 /* end of sbc8360.c */
index c12f1b7..41b74b1 100644 (file)
@@ -376,6 +376,8 @@ static int proc_ide_read_media
                                break;
                case ide_floppy:media = "floppy\n";
                                break;
+               case ide_optical:media = "optical\n";
+                               break;
                default:        media = "UNKNOWN\n";
                                break;
        }
index a7c725f..f286079 100644 (file)
@@ -425,12 +425,12 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
        return d->init_setup(dev, d);
 }
 
-static const struct pci_device_id aec62xx_pci_tbl[] = {
-       { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
-       { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
-       { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
-       { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
-       { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
+static struct pci_device_id aec62xx_pci_tbl[] = {
+       { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+       { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+       { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+       { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+       { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
        { 0, },
 };
 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
index 351dab2..d419e4b 100644 (file)
@@ -730,7 +730,7 @@ static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif)
        
        if(m5229_revision <= 0x20)
                tmpbyte = (tmpbyte & (~0x02)) | 0x01;
-       else if (m5229_revision == 0xc7)
+       else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
                tmpbyte |= 0x03;
        else
                tmpbyte |= 0x01;
index 03677bf..f063d95 100644 (file)
@@ -649,11 +649,11 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
 }
 
 static struct pci_device_id svwks_pci_tbl[] = {
-       { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
-       { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1},
-       { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
-       { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3},
-       { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4},
+       { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+       { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+       { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+       { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+       { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
        { 0, },
 };
 MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
index e125032..d8a0d87 100644 (file)
@@ -367,12 +367,13 @@ sgiioc4_INB(unsigned long port)
 static void __devinit
 ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
 {
+       void __iomem *virt_dma_base;
        int num_ports = sizeof (ioc4_dma_regs_t);
 
        printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
               dma_base, dma_base + num_ports - 1);
 
-       if (!request_region(dma_base, num_ports, hwif->name)) {
+       if (!request_mem_region(dma_base, num_ports, hwif->name)) {
                printk(KERN_ERR
                       "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
                       "ALREADY in use\n",
@@ -381,13 +382,21 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
                goto dma_alloc_failure;
        }
 
-       hwif->dma_base = dma_base;
+       virt_dma_base = ioremap(dma_base, num_ports);
+       if (virt_dma_base == NULL) {
+               printk(KERN_ERR
+                      "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
+                      __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1);
+               goto dma_remap_failure;
+       }
+       hwif->dma_base = (unsigned long) virt_dma_base;
+
        hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev,
                                          IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
                                          &hwif->dmatable_dma);
 
        if (!hwif->dmatable_cpu)
-               goto dma_alloc_failure;
+               goto dma_pci_alloc_failure;
 
        hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 
@@ -411,6 +420,12 @@ dma_base2alloc_failure:
        printk(KERN_INFO
               "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
 
+dma_pci_alloc_failure:
+       iounmap(virt_dma_base);
+
+dma_remap_failure:
+       release_mem_region(dma_base, num_ports);
+
 dma_alloc_failure:
        /* Disable DMA because we couldnot allocate any DMA maps */
        hwif->autodma = 0;
@@ -607,18 +622,15 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
        hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
        hwif->ide_dma_timeout = &__ide_dma_timeout;
 
-       /*
-        * The IOC4 uses MMIO rather than Port IO.
-        * It also needs special workarounds for INB.
-        */
-       default_hwif_mmiops(hwif);
        hwif->INB = &sgiioc4_INB;
 }
 
 static int __devinit
 sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
 {
-       unsigned long base, ctl, dma_base, irqport;
+       unsigned long cmd_base, dma_base, irqport;
+       unsigned long bar0, cmd_phys_base, ctl;
+       void __iomem *virt_base;
        ide_hwif_t *hwif;
        int h;
 
@@ -636,23 +648,32 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
        }
 
        /*  Get the CmdBlk and CtrlBlk Base Registers */
-       base = pci_resource_start(dev, 0) + IOC4_CMD_OFFSET;
-       ctl = pci_resource_start(dev, 0) + IOC4_CTRL_OFFSET;
-       irqport = pci_resource_start(dev, 0) + IOC4_INTR_OFFSET;
+       bar0 = pci_resource_start(dev, 0);
+       virt_base = ioremap(bar0, pci_resource_len(dev, 0));
+       if (virt_base == NULL) {
+               printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
+                       d->name, bar0);
+               return -ENOMEM;
+       }
+       cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
+       ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
+       irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
        dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 
-       if (!request_region(base, IOC4_CMD_CTL_BLK_SIZE, hwif->name)) {
+       cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
+       if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+           hwif->name)) {
                printk(KERN_ERR
-                       "%s : %s -- ERROR, Port Addresses "
+                       "%s : %s -- ERROR, Addresses "
                        "0x%p to 0x%p ALREADY in use\n",
-                      __FUNCTION__, hwif->name, (void *) base,
-                      (void *) base + IOC4_CMD_CTL_BLK_SIZE);
+                      __FUNCTION__, hwif->name, (void *) cmd_phys_base,
+                      (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
                return -ENOMEM;
        }
 
-       if (hwif->io_ports[IDE_DATA_OFFSET] != base) {
+       if (hwif->io_ports[IDE_DATA_OFFSET] != cmd_base) {
                /* Initialize the IO registers */
-               sgiioc4_init_hwif_ports(&hwif->hw, base, ctl, irqport);
+               sgiioc4_init_hwif_ports(&hwif->hw, cmd_base, ctl, irqport);
                memcpy(hwif->io_ports, hwif->hw.io_ports,
                       sizeof (hwif->io_ports));
                hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
@@ -665,6 +686,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
        hwif->cds = (struct ide_pci_device_s *) d;
        hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
 
+       /* The IOC4 uses MMIO rather than Port IO. */
+       default_hwif_mmiops(hwif);
+
        /* Initializing chipset IRQ Registers */
        hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);
 
index 25ceb4a..20b3929 100644 (file)
@@ -1082,10 +1082,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi
 }
 
 static struct pci_device_id siimage_pci_tbl[] = {
-       { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0},
+       { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 #ifdef CONFIG_BLK_DEV_IDE_SATA
-       { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1},
-       { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2},
+       { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+       { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 #endif
        { 0, },
 };
index 8a6c23a..f03196c 100644 (file)
@@ -86,6 +86,8 @@ static const struct {
        u8 chipset_family;
        u8 flags;
 } SiSHostChipInfo[] = {
+       { "SiS968",     PCI_DEVICE_ID_SI_968,   ATA_133  },
+       { "SiS966",     PCI_DEVICE_ID_SI_966,   ATA_133  },
        { "SiS965",     PCI_DEVICE_ID_SI_965,   ATA_133  },
        { "SiS745",     PCI_DEVICE_ID_SI_745,   ATA_100  },
        { "SiS735",     PCI_DEVICE_ID_SI_735,   ATA_100  },
index 25157f5..f930e55 100644 (file)
 /* Trivial bitmap-based allocator */
 u32 mthca_alloc(struct mthca_alloc *alloc)
 {
+       unsigned long flags;
        u32 obj;
 
-       spin_lock(&alloc->lock);
+       spin_lock_irqsave(&alloc->lock, flags);
+
        obj = find_next_zero_bit(alloc->table, alloc->max, alloc->last);
        if (obj >= alloc->max) {
                alloc->top = (alloc->top + alloc->max) & alloc->mask;
@@ -56,19 +58,24 @@ u32 mthca_alloc(struct mthca_alloc *alloc)
        } else
                obj = -1;
 
-       spin_unlock(&alloc->lock);
+       spin_unlock_irqrestore(&alloc->lock, flags);
 
        return obj;
 }
 
 void mthca_free(struct mthca_alloc *alloc, u32 obj)
 {
+       unsigned long flags;
+
        obj &= alloc->max - 1;
-       spin_lock(&alloc->lock);
+
+       spin_lock_irqsave(&alloc->lock, flags);
+
        clear_bit(obj, alloc->table);
        alloc->last = min(alloc->last, obj);
        alloc->top = (alloc->top + alloc->max) & alloc->mask;
-       spin_unlock(&alloc->lock);
+
+       spin_unlock_irqrestore(&alloc->lock, flags);
 }
 
 int mthca_alloc_init(struct mthca_alloc *alloc, u32 num, u32 mask,
index d3f8d75..a82f313 100644 (file)
 static struct backlight_properties pmu_backlight_data;
 static spinlock_t pmu_backlight_lock;
 static int sleeping;
+static u8 bl_curve[FB_BACKLIGHT_LEVELS];
 
-static int pmu_backlight_get_level_brightness(struct fb_info *info,
-               int level)
+static void pmu_backlight_init_curve(u8 off, u8 min, u8 max)
+{
+       unsigned int i, flat, count, range = (max - min);
+
+       bl_curve[0] = off;
+
+       for (flat = 1; flat < (FB_BACKLIGHT_LEVELS / 16); ++flat)
+               bl_curve[flat] = min;
+
+       count = FB_BACKLIGHT_LEVELS * 15 / 16;
+       for (i = 0; i < count; ++i)
+               bl_curve[flat + i] = min + (range * (i + 1) / count);
+}
+
+static int pmu_backlight_curve_lookup(int value)
+{
+       int level = (FB_BACKLIGHT_LEVELS - 1);
+       int i, max = 0;
+
+       /* Look for biggest value */
+       for (i = 0; i < FB_BACKLIGHT_LEVELS; i++)
+               max = max((int)bl_curve[i], max);
+
+       /* Look for nearest value */
+       for (i = 0; i < FB_BACKLIGHT_LEVELS; i++) {
+               int diff = abs(bl_curve[i] - value);
+               if (diff < max) {
+                       max = diff;
+                       level = i;
+               }
+       }
+       return level;
+}
+
+static int pmu_backlight_get_level_brightness(int level)
 {
        int pmulevel;
 
        /* Get and convert the value */
-       mutex_lock(&info->bl_mutex);
-       pmulevel = info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_PMU_LEVEL;
-       mutex_unlock(&info->bl_mutex);
-
+       pmulevel = bl_curve[level] * FB_BACKLIGHT_MAX / MAX_PMU_LEVEL;
        if (pmulevel < 0)
                pmulevel = 0;
        else if (pmulevel > MAX_PMU_LEVEL)
@@ -39,7 +70,6 @@ static int pmu_backlight_get_level_brightness(struct fb_info *info,
 
 static int pmu_backlight_update_status(struct backlight_device *bd)
 {
-       struct fb_info *info = class_get_devdata(&bd->class_dev);
        struct adb_request req;
        unsigned long flags;
        int level = bd->props->brightness;
@@ -55,7 +85,7 @@ static int pmu_backlight_update_status(struct backlight_device *bd)
                level = 0;
 
        if (level > 0) {
-               int pmulevel = pmu_backlight_get_level_brightness(info, level);
+               int pmulevel = pmu_backlight_get_level_brightness(level);
 
                pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT, pmulevel);
                pmu_wait_complete(&req);
@@ -88,35 +118,19 @@ static struct backlight_properties pmu_backlight_data = {
 };
 
 #ifdef CONFIG_PM
-static int pmu_backlight_sleep_call(struct pmu_sleep_notifier *self, int when)
+void pmu_backlight_set_sleep(int sleep)
 {
        unsigned long flags;
 
        spin_lock_irqsave(&pmu_backlight_lock, flags);
-
-       switch (when) {
-       case PBOOK_SLEEP_REQUEST:
-               sleeping = 1;
-               break;
-       case PBOOK_WAKE:
-               sleeping = 0;
-               break;
-       }
-
+       sleeping = sleep;
        spin_unlock_irqrestore(&pmu_backlight_lock, flags);
-
-       return PBOOK_SLEEP_OK;
 }
-
-static struct pmu_sleep_notifier pmu_backlight_sleep_notif = {
-       .notifier_call = pmu_backlight_sleep_call,
-};
-#endif
+#endif /* CONFIG_PM */
 
 void __init pmu_backlight_init()
 {
        struct backlight_device *bd;
-       struct fb_info *info;
        char name[10];
        int level, autosave;
 
@@ -131,27 +145,14 @@ void __init pmu_backlight_init()
            !machine_is_compatible("PowerBook1,1"))
                return;
 
-       /* Actually, this is a hack, but I don't know of a better way
-        * to get the first framebuffer device.
-        */
-       info = registered_fb[0];
-       if (!info) {
-               printk("pmubl: No framebuffer found\n");
-               goto error;
-       }
-
-       snprintf(name, sizeof(name), "pmubl%d", info->node);
+       snprintf(name, sizeof(name), "pmubl");
 
-       bd = backlight_device_register(name, info, &pmu_backlight_data);
+       bd = backlight_device_register(name, NULL, &pmu_backlight_data);
        if (IS_ERR(bd)) {
                printk("pmubl: Backlight registration failed\n");
                goto error;
        }
-
-       mutex_lock(&info->bl_mutex);
-       info->bl_dev = bd;
-       fb_bl_default_curve(info, 0x7F, 0x46, 0x0E);
-       mutex_unlock(&info->bl_mutex);
+       pmu_backlight_init_curve(0x7F, 0x46, 0x0E);
 
        level = pmu_backlight_data.max_brightness;
 
@@ -161,28 +162,22 @@ void __init pmu_backlight_init()
                pmu_request(&req, NULL, 2, 0xd9, 0);
                pmu_wait_complete(&req);
 
-               mutex_lock(&info->bl_mutex);
-               level = pmac_backlight_curve_lookup(info,
+               level = pmu_backlight_curve_lookup(
                                (req.reply[0] >> 4) *
                                pmu_backlight_data.max_brightness / 15);
-               mutex_unlock(&info->bl_mutex);
        }
 
-       up(&bd->sem);
+       down(&bd->sem);
        bd->props->brightness = level;
        bd->props->power = FB_BLANK_UNBLANK;
        bd->props->update_status(bd);
-       down(&bd->sem);
+       up(&bd->sem);
 
        mutex_lock(&pmac_backlight_mutex);
        if (!pmac_backlight)
                pmac_backlight = bd;
        mutex_unlock(&pmac_backlight_mutex);
 
-#ifdef CONFIG_PM
-       pmu_register_sleep_notifier(&pmu_backlight_sleep_notif);
-#endif
-
        printk("pmubl: Backlight initialized (%s)\n", name);
 
        return;
index 0df500b..dda0398 100644 (file)
@@ -1995,6 +1995,8 @@ restore_via_state(void)
        out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
 }
 
+extern void pmu_backlight_set_sleep(int sleep);
+
 static int
 pmac_suspend_devices(void)
 {
@@ -2032,6 +2034,11 @@ pmac_suspend_devices(void)
                return -EBUSY;
        }
 
+#ifdef CONFIG_PMAC_BACKLIGHT
+       /* Tell backlight code not to muck around with the chip anymore */
+       pmu_backlight_set_sleep(1);
+#endif
+
        /* Call platform functions marked "on sleep" */
        pmac_pfunc_i2c_suspend();
        pmac_pfunc_base_suspend();
@@ -2090,6 +2097,11 @@ pmac_wakeup_devices(void)
 {
        mdelay(100);
 
+#ifdef CONFIG_PMAC_BACKLIGHT
+       /* Tell backlight code it can use the chip again */
+       pmu_backlight_set_sleep(0);
+#endif
+
        /* Power back up system devices (including the PIC) */
        device_power_up();
 
index 87bfe9e..3b4d69c 100644 (file)
@@ -930,10 +930,13 @@ static void status(struct seq_file *seq, mddev_t *mddev)
 
        seq_printf(seq, " [%d/%d] [", conf->raid_disks,
                                                conf->working_disks);
-       for (i = 0; i < conf->raid_disks; i++)
+       rcu_read_lock();
+       for (i = 0; i < conf->raid_disks; i++) {
+               mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
                seq_printf(seq, "%s",
-                             conf->mirrors[i].rdev &&
-                             test_bit(In_sync, &conf->mirrors[i].rdev->flags) ? "U" : "_");
+                          rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
+       }
+       rcu_read_unlock();
        seq_printf(seq, "]");
 }
 
@@ -975,7 +978,6 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev)
 static void print_conf(conf_t *conf)
 {
        int i;
-       mirror_info_t *tmp;
 
        printk("RAID1 conf printout:\n");
        if (!conf) {
@@ -985,14 +987,17 @@ static void print_conf(conf_t *conf)
        printk(" --- wd:%d rd:%d\n", conf->working_disks,
                conf->raid_disks);
 
+       rcu_read_lock();
        for (i = 0; i < conf->raid_disks; i++) {
                char b[BDEVNAME_SIZE];
-               tmp = conf->mirrors + i;
-               if (tmp->rdev)
+               mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
+               if (rdev)
                        printk(" disk %d, wo:%d, o:%d, dev:%s\n",
-                               i, !test_bit(In_sync, &tmp->rdev->flags), !test_bit(Faulty, &tmp->rdev->flags),
-                               bdevname(tmp->rdev->bdev,b));
+                              i, !test_bit(In_sync, &rdev->flags),
+                              !test_bit(Faulty, &rdev->flags),
+                              bdevname(rdev->bdev,b));
        }
+       rcu_read_unlock();
 }
 
 static void close_sync(conf_t *conf)
@@ -1008,20 +1013,20 @@ static int raid1_spare_active(mddev_t *mddev)
 {
        int i;
        conf_t *conf = mddev->private;
-       mirror_info_t *tmp;
 
        /*
         * Find all failed disks within the RAID1 configuration 
-        * and mark them readable
+        * and mark them readable.
+        * Called under mddev lock, so rcu protection not needed.
         */
        for (i = 0; i < conf->raid_disks; i++) {
-               tmp = conf->mirrors + i;
-               if (tmp->rdev 
-                   && !test_bit(Faulty, &tmp->rdev->flags)
-                   && !test_bit(In_sync, &tmp->rdev->flags)) {
+               mdk_rdev_t *rdev = conf->mirrors[i].rdev;
+               if (rdev
+                   && !test_bit(Faulty, &rdev->flags)
+                   && !test_bit(In_sync, &rdev->flags)) {
                        conf->working_disks++;
                        mddev->degraded--;
-                       set_bit(In_sync, &tmp->rdev->flags);
+                       set_bit(In_sync, &rdev->flags);
                }
        }
 
@@ -1237,7 +1242,7 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio)
                /* ouch - failed to read all of that.
                 * Try some synchronous reads of other devices to get
                 * good data, much like with normal read errors.  Only
-                * read into the pages we already have so they we don't
+                * read into the pages we already have so we don't
                 * need to re-issue the read request.
                 * We don't need to freeze the array, because being in an
                 * active sync request, there is no normal IO, and
@@ -1257,6 +1262,10 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio)
                                s = PAGE_SIZE >> 9;
                        do {
                                if (r1_bio->bios[d]->bi_end_io == end_sync_read) {
+                                       /* No rcu protection needed here devices
+                                        * can only be removed when no resync is
+                                        * active, and resync is currently active
+                                        */
                                        rdev = conf->mirrors[d].rdev;
                                        if (sync_page_io(rdev->bdev,
                                                         sect + rdev->data_offset,
@@ -1463,6 +1472,11 @@ static void raid1d(mddev_t *mddev)
                                        s = PAGE_SIZE >> 9;
 
                                do {
+                                       /* Note: no rcu protection needed here
+                                        * as this is synchronous in the raid1d thread
+                                        * which is the thread that might remove
+                                        * a device.  If raid1d ever becomes multi-threaded....
+                                        */
                                        rdev = conf->mirrors[d].rdev;
                                        if (rdev &&
                                            test_bit(In_sync, &rdev->flags) &&
@@ -1486,7 +1500,6 @@ static void raid1d(mddev_t *mddev)
                                                        d = conf->raid_disks;
                                                d--;
                                                rdev = conf->mirrors[d].rdev;
-                                               atomic_add(s, &rdev->corrected_errors);
                                                if (rdev &&
                                                    test_bit(In_sync, &rdev->flags)) {
                                                        if (sync_page_io(rdev->bdev,
@@ -1509,9 +1522,11 @@ static void raid1d(mddev_t *mddev)
                                                                         s<<9, conf->tmppage, READ) == 0)
                                                                /* Well, this device is dead */
                                                                md_error(mddev, rdev);
-                                                       else
+                                                       else {
+                                                               atomic_add(s, &rdev->corrected_errors);
                                                                printk(KERN_INFO "raid1:%s: read error corrected (%d sectors at %llu on %s)\n",
                                                                       mdname(mddev), s, (unsigned long long)(sect + rdev->data_offset), bdevname(rdev->bdev, b));
+                                                       }
                                                }
                                        }
                                } else {
@@ -1787,19 +1802,17 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
                for (i=0; i<conf->raid_disks; i++) {
                        bio = r1_bio->bios[i];
                        if (bio->bi_end_io == end_sync_read) {
-                               md_sync_acct(conf->mirrors[i].rdev->bdev, nr_sectors);
+                               md_sync_acct(bio->bi_bdev, nr_sectors);
                                generic_make_request(bio);
                        }
                }
        } else {
                atomic_set(&r1_bio->remaining, 1);
                bio = r1_bio->bios[r1_bio->read_disk];
-               md_sync_acct(conf->mirrors[r1_bio->read_disk].rdev->bdev,
-                            nr_sectors);
+               md_sync_acct(bio->bi_bdev, nr_sectors);
                generic_make_request(bio);
 
        }
-
        return nr_sectors;
 }
 
index ef52e6d..ed4aa4e 100644 (file)
@@ -53,7 +53,7 @@ config VIDEO_V4L1_COMPAT
          If you are unsure as to whether this is required, answer Y.
 
 config VIDEO_V4L2
-       tristate
+       bool
        default y
 
 source "drivers/media/video/Kconfig"
index 8393d47..7e0cedc 100644 (file)
@@ -1190,6 +1190,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
                }
                return err;
        }
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
        case VIDIOCGMBUF:
        {
                struct video_mbuf *mbuf = arg;
@@ -1218,6 +1219,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
                mutex_unlock(&q->lock);
                return 0;
        }
+#endif
        default:
                return v4l_compat_translate_ioctl(inode,file,cmd,arg,
                                                  saa7146_video_do_ioctl);
index d7f1fd5..49a06fc 100644 (file)
@@ -1,6 +1,7 @@
 config DVB_B2C2_FLEXCOP
        tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
        depends on DVB_CORE && I2C
+       select DVB_PLL
        select DVB_STV0299
        select DVB_MT352
        select DVB_MT312
index f394002..7d0ee1a 100644 (file)
@@ -1,6 +1,7 @@
 config DVB_BT8XX
        tristate "BT8xx based PCI cards"
        depends on DVB_CORE && PCI && I2C && VIDEO_BT848
+       select DVB_PLL
        select DVB_MT352
        select DVB_SP887X
        select DVB_NXT6000
index 3bc6722..75824b7 100644 (file)
@@ -2,6 +2,7 @@ config DVB_USB
        tristate "Support for various USB DVB devices"
        depends on DVB_CORE && USB && I2C
        select FW_LOADER
+       select DVB_PLL
        help
          By enabling this you will be able to choose the various supported
          USB1.1 and USB2.0 DVB devices.
index 0ef361f..db97855 100644 (file)
@@ -6,43 +6,43 @@ comment "DVB-S (satellite) frontends"
 
 config DVB_STV0299
        tristate "ST STV0299 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX24110
        tristate "Conexant CX24110 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX24123
        tristate "Conexant CX24123 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA8083
        tristate "Philips TDA8083 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT312
        tristate "Zarlink VP310/MT312 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_VES1X93
        tristate "VLSI VES1893 or VES1993 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_S5H1420
        tristate "Samsung S5H1420 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-S tuner module. Say Y when you want to support this frontend.
 
@@ -51,7 +51,7 @@ comment "DVB-T (terrestrial) frontends"
 
 config DVB_SP8870
        tristate "Spase sp8870 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        select FW_LOADER
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
@@ -63,7 +63,7 @@ config DVB_SP8870
 
 config DVB_SP887X
        tristate "Spase sp887x based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        select FW_LOADER
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
@@ -75,25 +75,25 @@ config DVB_SP887X
 
 config DVB_CX22700
        tristate "Conexant CX22700 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX22702
        tristate "Conexant cx22702 demodulator (OFDM)"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_L64781
        tristate "LSI L64781"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA1004X
        tristate "Philips TDA10045H/TDA10046H based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        select FW_LOADER
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
@@ -106,32 +106,32 @@ config DVB_TDA1004X
 
 config DVB_NXT6000
        tristate "NxtWave Communications NXT6000 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT352
        tristate "Zarlink MT352 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_ZL10353
        tristate "Zarlink ZL10353 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_DIB3000MB
        tristate "DiBcom 3000M-B"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Designed for mobile usage. Say Y when you want
          to support this frontend.
 
 config DVB_DIB3000MC
        tristate "DiBcom 3000P/M-C"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-T tuner module. Designed for mobile usage. Say Y when you want
          to support this frontend.
@@ -141,19 +141,19 @@ comment "DVB-C (cable) frontends"
 
 config DVB_VES1820
        tristate "VLSI VES1820 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA10021
        tristate "Philips TDA10021 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_STV0297
        tristate "ST STV0297 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          A DVB-C tuner module. Say Y when you want to support this frontend.
 
@@ -162,7 +162,7 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
 
 config DVB_NXT200X
        tristate "NxtWave Communications NXT2002/NXT2004 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        select FW_LOADER
        help
          An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
@@ -176,7 +176,7 @@ config DVB_NXT200X
 
 config DVB_OR51211
        tristate "Oren OR51211 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        select FW_LOADER
        help
          An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
@@ -188,7 +188,7 @@ config DVB_OR51211
 
 config DVB_OR51132
        tristate "Oren OR51132 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        select FW_LOADER
        help
          An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
@@ -203,7 +203,7 @@ config DVB_OR51132
 
 config DVB_BCM3510
        tristate "Broadcom BCM3510"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        select FW_LOADER
        help
          An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
@@ -211,7 +211,7 @@ config DVB_BCM3510
 
 config DVB_LGDT330X
        tristate "LG Electronics LGDT3302/LGDT3303 based"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
          to support this frontend.
@@ -220,15 +220,19 @@ config DVB_LGDT330X
 comment "Miscellaneous devices"
        depends on DVB_CORE
 
+config DVB_PLL
+       tristate
+       depends on DVB_CORE && I2C
+
 config DVB_LNBP21
        tristate "LNBP21 SEC controller"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          An SEC control chip.
 
 config DVB_ISL6421
        tristate "ISL6421 SEC controller"
-       depends on DVB_CORE
+       depends on DVB_CORE && I2C
        help
          An SEC control chip.
 
index 5222245..0e4880b 100644 (file)
@@ -4,7 +4,7 @@
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
 
-obj-$(CONFIG_DVB_CORE) += dvb-pll.o
+obj-$(CONFIG_DVB_PLL) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
 obj-$(CONFIG_DVB_SP8870) += sp8870.o
 obj-$(CONFIG_DVB_CX22700) += cx22700.o
index 7d8e6e8..9b84b1b 100644 (file)
@@ -2,6 +2,7 @@ config DVB_PLUTO2
        tristate "Pluto2 cards"
        depends on DVB_CORE && PCI && I2C
        select I2C_ALGOBIT
+       select DVB_PLL
        select DVB_TDA1004X
        help
          Support for PCI cards based on the Pluto2 FPGA like the Satelco
index 987881f..5fb0975 100644 (file)
@@ -3,6 +3,7 @@ config DVB_AV7110
        depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
        select FW_LOADER
        select VIDEO_SAA7146_VV
+       select DVB_PLL
        select DVB_VES1820
        select DVB_VES1X93
        select DVB_STV0299
@@ -61,6 +62,7 @@ config DVB_BUDGET
        tristate "Budget cards"
        depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
        select VIDEO_SAA7146
+       select DVB_PLL
        select DVB_STV0299
        select DVB_VES1X93
        select DVB_VES1820
@@ -83,6 +85,7 @@ config DVB_BUDGET_CI
        tristate "Budget cards with onboard CI connector"
        depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
        select VIDEO_SAA7146
+       select DVB_PLL
        select DVB_STV0297
        select DVB_STV0299
        select DVB_TDA1004X
@@ -104,6 +107,7 @@ config DVB_BUDGET_AV
        tristate "Budget cards with analog video inputs"
        depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
        select VIDEO_SAA7146_VV
+       select DVB_PLL
        select DVB_STV0299
        select DVB_TDA1004X
        select DVB_TDA10021
@@ -122,6 +126,7 @@ config DVB_BUDGET_PATCH
        tristate "AV7110 cards with Budget Patch"
        depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
        select DVB_AV7110
+       select DVB_PLL
        select DVB_STV0299
        select DVB_VES1X93
        select DVB_TDA8083
index 92c7cdc..46a6a60 100644 (file)
@@ -1,6 +1,7 @@
 config DVB_TTUSB_BUDGET
        tristate "Technotrend/Hauppauge Nova-USB devices"
-       depends on DVB_CORE && USB
+       depends on DVB_CORE && USB && I2C
+       select DVB_PLL
        select DVB_CX22700
        select DVB_TDA1004X
        select DVB_VES1820
index 732bf1e..94d078b 100644 (file)
@@ -260,7 +260,7 @@ source "drivers/media/video/saa7134/Kconfig"
 
 config VIDEO_MXB
        tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
-       depends on PCI && VIDEO_V4L1
+       depends on PCI && VIDEO_V4L1 && I2C
        select VIDEO_SAA7146_VV
        select VIDEO_TUNER
        ---help---
@@ -272,7 +272,7 @@ config VIDEO_MXB
 
 config VIDEO_DPC
        tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
-       depends on PCI && VIDEO_V4L1
+       depends on PCI && VIDEO_V4L1 && I2C
        select VIDEO_SAA7146_VV
        select VIDEO_V4L2
        ---help---
@@ -287,7 +287,7 @@ config VIDEO_DPC
 
 config VIDEO_HEXIUM_ORION
        tristate "Hexium HV-PCI6 and Orion frame grabber"
-       depends on PCI && VIDEO_V4L1
+       depends on PCI && VIDEO_V4L1 && I2C
        select VIDEO_SAA7146_VV
        select VIDEO_V4L2
        ---help---
@@ -299,7 +299,7 @@ config VIDEO_HEXIUM_ORION
 
 config VIDEO_HEXIUM_GEMINI
        tristate "Hexium Gemini frame grabber"
-       depends on PCI && VIDEO_V4L1
+       depends on PCI && VIDEO_V4L1 && I2C
        select VIDEO_SAA7146_VV
        select VIDEO_V4L2
        ---help---
index b41f81d..933d6db 100644 (file)
@@ -303,6 +303,7 @@ int bttv_input_init(struct bttv *btv)
                ir->mask_keyup   = 0x010000;
                ir->polling      = 50; // ms
                break;
+       case BTTV_BOARD_PV_M4900:
        case BTTV_BOARD_PV_BT878P_9B:
        case BTTV_BOARD_PV_BT878P_PLUS:
                ir_codes         = ir_codes_pixelview;
index 80e23ee..7a94e6a 100644 (file)
@@ -51,6 +51,7 @@ config VIDEO_CX88_DVB
        tristate "DVB/ATSC Support for cx2388x based TV cards"
        depends on VIDEO_CX88 && DVB_CORE
        select VIDEO_BUF_DVB
+       select DVB_PLL
        ---help---
          This adds support for DVB/ATSC cards based on the
          Conexant 2388x chip.
index e1c1805..f554316 100644 (file)
@@ -40,6 +40,7 @@ config VIDEO_SAA7134_DVB
        depends on VIDEO_SAA7134 && DVB_CORE
        select VIDEO_BUF_DVB
        select FW_LOADER
+       select DVB_PLL
        ---help---
          This adds support for DVB cards based on the
          Philips saa7134 chip.
index d7eadc2..8b54259 100644 (file)
@@ -926,11 +926,17 @@ static struct tuner_params tuner_lg_tdvs_h06xf_params[] = {
 
 /* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */
 
+static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = {
+       { 16 * 160.25 /*MHz*/, 0x8e, 0x01, },
+       { 16 * 464.25 /*MHz*/, 0x8e, 0x02, },
+       { 16 * 999.99        , 0x8e, 0x08, },
+};
+
 static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = {
        {
                .type   = TUNER_PARAM_TYPE_PAL,
-               .ranges = tuner_tena_9533_di_pal_ranges,
-               .count  = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges),
+               .ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges,
+               .count  = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges),
        },
 };
 
index ffcda95..8fb4a34 100644 (file)
@@ -267,7 +267,7 @@ struct zoran_v4l_settings {
 };
 
 /* whoops, this one is undeclared if !v4l2 */
-#ifndef HAVE_V4L2
+#ifndef CONFIG_VIDEO_V4L2
 struct v4l2_jpegcompression {
        int quality;
        int APPn;
index d9a5876..5f90db2 100644 (file)
@@ -86,7 +86,7 @@
 #include "zoran_device.h"
 #include "zoran_card.h"
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
        /* we declare some card type definitions here, they mean
         * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */
 #define ZORAN_V4L2_VID_FLAGS ( \
@@ -103,7 +103,7 @@ const struct zoran_format zoran_formats[] = {
        {
                .name = "15-bit RGB",
                .palette = VIDEO_PALETTE_RGB555,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
                .fourcc = V4L2_PIX_FMT_RGB555,
 #else
@@ -117,7 +117,7 @@ const struct zoran_format zoran_formats[] = {
        }, {
                .name = "16-bit RGB",
                .palette = VIDEO_PALETTE_RGB565,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
                .fourcc = V4L2_PIX_FMT_RGB565,
 #else
@@ -131,7 +131,7 @@ const struct zoran_format zoran_formats[] = {
        }, {
                .name = "24-bit RGB",
                .palette = VIDEO_PALETTE_RGB24,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
                .fourcc = V4L2_PIX_FMT_BGR24,
 #else
@@ -145,7 +145,7 @@ const struct zoran_format zoran_formats[] = {
        }, {
                .name = "32-bit RGB",
                .palette = VIDEO_PALETTE_RGB32,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
                .fourcc = V4L2_PIX_FMT_BGR32,
 #else
@@ -159,7 +159,7 @@ const struct zoran_format zoran_formats[] = {
        }, {
                .name = "4:2:2, packed, YUYV",
                .palette = VIDEO_PALETTE_YUV422,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
                .fourcc = V4L2_PIX_FMT_YUYV,
                .colorspace = V4L2_COLORSPACE_SMPTE170M,
 #endif
@@ -169,7 +169,7 @@ const struct zoran_format zoran_formats[] = {
        }, {
                .name = "Hardware-encoded Motion-JPEG",
                .palette = -1,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
                .fourcc = V4L2_PIX_FMT_MJPEG,
                .colorspace = V4L2_COLORSPACE_SMPTE170M,
 #endif
@@ -210,7 +210,7 @@ static int lock_norm = 0;   /* 1=Don't change TV standard (norm) */
 module_param(lock_norm, int, 0);
 MODULE_PARM_DESC(lock_norm, "Users can't change norm");
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
        /* small helper function for calculating buffersizes for v4l2
         * we calculate the nearest higher power-of-two, which
         * will be the recommended buffersize */
@@ -1761,7 +1761,7 @@ setup_overlay (struct file *file,
        return wait_grab_pending(zr);
 }
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
        /* get the status of a buffer in the clients buffer queue */
 static int
 zoran_v4l2_buffer_status (struct file        *file,
@@ -2676,7 +2676,7 @@ zoran_do_ioctl (struct inode *inode,
        }
                break;
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 
                /* The new video4linux2 capture interface - much nicer than video4linux1, since
                 * it allows for integrating the JPEG capturing calls inside standard v4l2
@@ -4689,7 +4689,7 @@ static struct file_operations zoran_fops = {
 struct video_device zoran_template __devinitdata = {
        .name = ZORAN_NAME,
        .type = ZORAN_VID_TYPE,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
        .type2 = ZORAN_V4L2_VID_FLAGS,
 #endif
        .hardware = ZORAN_HARDWARE,
index 7ca9e95..fb6565b 100644 (file)
@@ -91,6 +91,8 @@ struct imxmci_host {
        int                     dma_allocated;
 
        unsigned char           actual_bus_width;
+
+       int                     prev_cmd_code;
 };
 
 #define IMXMCI_PEND_IRQ_b      0
@@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
         * partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
         * This is required for SCR read at least.
         */
-       if (datasz < 64) {
+       if (datasz < 512) {
                host->dma_size = datasz;
                if (data->flags & MMC_DATA_READ) {
                        host->dma_dir = DMA_FROM_DEVICE;
 
                        /* Hack to enable read SCR */
-                       if(datasz < 16) {
-                               MMC_NOB = 1;
-                               MMC_BLK_LEN = 16;
-                       }
+                       MMC_NOB = 1;
+                       MMC_BLK_LEN = 512;
                } else {
                        host->dma_dir = DMA_TO_DEVICE;
                }
@@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *
 
        spin_unlock_irqrestore(&host->lock, flags);
 
+       if(req && req->cmd)
+               host->prev_cmd_code = req->cmd->opcode;
+
        host->req = NULL;
        host->cmd = NULL;
        host->data = NULL;
@@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 {
        int i;
        int burst_len;
-       int flush_len;
        int trans_done = 0;
        unsigned int stat = *pstat;
 
@@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
        dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
                stat);
 
+       udelay(20);     /* required for clocks < 8MHz*/
+
        if(host->dma_dir == DMA_FROM_DEVICE) {
                imxmci_busy_wait_for_status(host, &stat,
                                STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE,
-                               20, "imxmci_cpu_driven_data read");
+                               50, "imxmci_cpu_driven_data read");
 
                while((stat & (STATUS_APPL_BUFF_FF |  STATUS_DATA_TRANS_DONE)) &&
-                     (host->data_cnt < host->dma_size)) {
-                       if(burst_len >= host->dma_size - host->data_cnt) {
-                               flush_len = burst_len;
-                               burst_len = host->dma_size - host->data_cnt;
-                               flush_len -= burst_len;
-                               host->data_cnt = host->dma_size;
-                               trans_done = 1;
-                       } else {
-                               flush_len = 0;
-                               host->data_cnt += burst_len;
-                       }
+                     (host->data_cnt < 512)) {
+
+                       udelay(20);     /* required for clocks < 8MHz*/
 
                        for(i = burst_len; i>=2 ; i-=2) {
-                               *(host->data_ptr++) = MMC_BUFFER_ACCESS;
-                               udelay(20);     /* required for clocks < 8MHz*/
+                               u16 data;
+                               data = MMC_BUFFER_ACCESS;
+                               udelay(10);     /* required for clocks < 8MHz*/
+                               if(host->data_cnt+2 <= host->dma_size) {
+                                       *(host->data_ptr++) = data;
+                               } else {
+                                       if(host->data_cnt < host->dma_size)
+                                               *(u8*)(host->data_ptr) = data;
+                               }
+                               host->data_cnt += 2;
                        }
 
-                       if(i == 1)
-                               *(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS;
-
                        stat = MMC_STATUS;
 
-                       /* Flush extra bytes from FIFO */
-                       while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
-                               i = MMC_BUFFER_ACCESS;
-                               stat = MMC_STATUS;
-                               stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
-                       }
-
-                       dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n",
-                               burst_len, stat);
+                       dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
+                               host->data_cnt, burst_len, stat);
                }
+
+               if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
+                       trans_done = 1;
+
+               if(host->dma_size & 0x1ff)
+                       stat &= ~STATUS_CRC_READ_ERR;
+
        } else {
                imxmci_busy_wait_for_status(host, &stat,
                                STATUS_APPL_BUFF_FE,
@@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data)
                       what, stat, MMC_INT_MASK);
                dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
                       MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
-               dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n",
-                      host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size);
+               dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
+                      host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size);
        }
 
        if(!host->present || timeout)
index 33525bd..74eaaee 100644 (file)
@@ -247,6 +247,55 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,
 
 EXPORT_SYMBOL(mmc_wait_for_app_cmd);
 
+/**
+ *     mmc_set_data_timeout - set the timeout for a data command
+ *     @data: data phase for command
+ *     @card: the MMC card associated with the data transfer
+ *     @write: flag to differentiate reads from writes
+ */
+void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
+                         int write)
+{
+       unsigned int mult;
+
+       /*
+        * SD cards use a 100 multiplier rather than 10
+        */
+       mult = mmc_card_sd(card) ? 100 : 10;
+
+       /*
+        * Scale up the multiplier (and therefore the timeout) by
+        * the r2w factor for writes.
+        */
+       if (write)
+               mult <<= card->csd.r2w_factor;
+
+       data->timeout_ns = card->csd.tacc_ns * mult;
+       data->timeout_clks = card->csd.tacc_clks * mult;
+
+       /*
+        * SD cards also have an upper limit on the timeout.
+        */
+       if (mmc_card_sd(card)) {
+               unsigned int timeout_us, limit_us;
+
+               timeout_us = data->timeout_ns / 1000;
+               timeout_us += data->timeout_clks * 1000 /
+                       (card->host->ios.clock / 1000);
+
+               if (write)
+                       limit_us = 250000;
+               else
+                       limit_us = 100000;
+
+               if (timeout_us > limit_us) {
+                       data->timeout_ns = limit_us * 1000;
+                       data->timeout_clks = 0;
+               }
+       }
+}
+EXPORT_SYMBOL(mmc_set_data_timeout);
+
 static int mmc_select_card(struct mmc_host *host, struct mmc_card *card);
 
 /**
@@ -908,11 +957,9 @@ static void mmc_read_scrs(struct mmc_host *host)
 {
        int err;
        struct mmc_card *card;
-
        struct mmc_request mrq;
        struct mmc_command cmd;
        struct mmc_data data;
-
        struct scatterlist sg;
 
        list_for_each_entry(card, &host->cards, node) {
@@ -947,8 +994,8 @@ static void mmc_read_scrs(struct mmc_host *host)
 
                memset(&data, 0, sizeof(struct mmc_data));
 
-               data.timeout_ns = card->csd.tacc_ns * 10;
-               data.timeout_clks = card->csd.tacc_clks * 10;
+               mmc_set_data_timeout(&data, card, 0);
+
                data.blksz_bits = 3;
                data.blksz = 1 << 3;
                data.blocks = 1;
index 115cc21..a0e0dad 100644 (file)
@@ -30,6 +30,7 @@
 #include <linux/mutex.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
 
 #include <asm/system.h>
@@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
                brq.cmd.arg = req->sector << 9;
                brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-               brq.data.timeout_ns = card->csd.tacc_ns * 10;
-               brq.data.timeout_clks = card->csd.tacc_clks * 10;
                brq.data.blksz_bits = md->block_bits;
                brq.data.blksz = 1 << md->block_bits;
                brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
@@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                brq.stop.arg = 0;
                brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
+               mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
+
                if (rq_data_dir(req) == READ) {
                        brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
                        brq.data.flags |= MMC_DATA_READ;
@@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
                        brq.cmd.opcode = MMC_WRITE_BLOCK;
                        brq.data.flags |= MMC_DATA_WRITE;
                        brq.data.blocks = 1;
-
-                       /*
-                        * Scale up the timeout by the r2w factor
-                        */
-                       brq.data.timeout_ns <<= card->csd.r2w_factor;
-                       brq.data.timeout_clks <<= card->csd.r2w_factor;
                }
 
                if (brq.data.blocks > 1) {
@@ -324,52 +319,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
        md->read_only = mmc_blk_readonly(card);
 
        /*
-        * Figure out a workable block size.  MMC cards have:
-        *  - two block sizes, one for read and one for write.
-        *  - may support partial reads and/or writes
-        *    (allows block sizes smaller than specified)
-        */
-       md->block_bits = card->csd.read_blkbits;
-       if (card->csd.write_blkbits != card->csd.read_blkbits) {
-               if (card->csd.write_blkbits < card->csd.read_blkbits &&
-                   card->csd.read_partial) {
-                       /*
-                        * write block size is smaller than read block
-                        * size, but we support partial reads, so choose
-                        * the smaller write block size.
-                        */
-                       md->block_bits = card->csd.write_blkbits;
-               } else if (card->csd.write_blkbits > card->csd.read_blkbits &&
-                          card->csd.write_partial) {
-                       /*
-                        * read block size is smaller than write block
-                        * size, but we support partial writes.  Use read
-                        * block size.
-                        */
-               } else {
-                       /*
-                        * We don't support this configuration for writes.
-                        */
-                       printk(KERN_ERR "%s: unable to select block size for "
-                               "writing (rb%u wb%u rp%u wp%u)\n",
-                               mmc_card_id(card),
-                               1 << card->csd.read_blkbits,
-                               1 << card->csd.write_blkbits,
-                               card->csd.read_partial,
-                               card->csd.write_partial);
-                       md->read_only = 1;
-               }
-       }
-
-       /*
-        * Refuse to allow block sizes smaller than 512 bytes.
+        * Both SD and MMC specifications state (although a bit
+        * unclearly in the MMC case) that a block size of 512
+        * bytes must always be supported by the card.
         */
-       if (md->block_bits < 9) {
-               printk(KERN_ERR "%s: unable to support block size %u\n",
-                       mmc_card_id(card), 1 << md->block_bits);
-               ret = -EINVAL;
-               goto err_kfree;
-       }
+       md->block_bits = 9;
 
        md->disk = alloc_disk(1 << MMC_SHIFT);
        if (md->disk == NULL) {
index 30b3671..a2bd811 100644 (file)
@@ -2393,7 +2393,7 @@ config MYRI10GE
          you will need a newer firmware image.
          You may get this image or more information, at:
 
-         <http://www.myri.com/Myri-10G/>
+         <http://www.myri.com/scs/download-Myri10GE.html>
 
          To compile this driver as a module, choose M here and read
          <file:Documentation/networking/net-modules.txt>.  The module
index 3d76fa1..a860ebb 100644 (file)
@@ -377,8 +377,8 @@ dm9000_release_board(struct platform_device *pdev, struct board_info *db)
                kfree(db->data_req);
        }
 
-       if (db->addr_res != NULL) {
-               release_resource(db->addr_res);
+       if (db->addr_req != NULL) {
+               release_resource(db->addr_req);
                kfree(db->addr_req);
        }
 }
index 7317742..17e709e 100644 (file)
@@ -667,6 +667,7 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_vi
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
index d8e9b95..25c1ef6 100644 (file)
@@ -52,7 +52,7 @@ static void dasd_setup_queue(struct dasd_device * device);
 static void dasd_free_queue(struct dasd_device * device);
 static void dasd_flush_request_queue(struct dasd_device *);
 static void dasd_int_handler(struct ccw_device *, unsigned long, struct irb *);
-static void dasd_flush_ccw_queue(struct dasd_device *, int);
+static int dasd_flush_ccw_queue(struct dasd_device *, int);
 static void dasd_tasklet(struct dasd_device *);
 static void do_kick_device(void *data);
 
@@ -60,6 +60,7 @@ static void do_kick_device(void *data);
  * SECTION: Operations on the device structure.
  */
 static wait_queue_head_t dasd_init_waitq;
+static wait_queue_head_t dasd_flush_wq;
 
 /*
  * Allocate memory for a new device structure.
@@ -121,7 +122,7 @@ dasd_free_device(struct dasd_device *device)
 /*
  * Make a new device known to the system.
  */
-static inline int
+static int
 dasd_state_new_to_known(struct dasd_device *device)
 {
        int rc;
@@ -145,7 +146,7 @@ dasd_state_new_to_known(struct dasd_device *device)
 /*
  * Let the system forget about a device.
  */
-static inline void
+static int
 dasd_state_known_to_new(struct dasd_device * device)
 {
        /* Disable extended error reporting for this device. */
@@ -163,12 +164,13 @@ dasd_state_known_to_new(struct dasd_device * device)
 
        /* Give up reference we took in dasd_state_new_to_known. */
        dasd_put_device(device);
+       return 0;
 }
 
 /*
  * Request the irq line for the device.
  */
-static inline int
+static int
 dasd_state_known_to_basic(struct dasd_device * device)
 {
        int rc;
@@ -192,17 +194,23 @@ dasd_state_known_to_basic(struct dasd_device * device)
 /*
  * Release the irq line for the device. Terminate any running i/o.
  */
-static inline void
+static int
 dasd_state_basic_to_known(struct dasd_device * device)
 {
+       int rc;
+
        dasd_gendisk_free(device);
-       dasd_flush_ccw_queue(device, 1);
+       rc = dasd_flush_ccw_queue(device, 1);
+       if (rc)
+               return rc;
+
        DBF_DEV_EVENT(DBF_EMERG, device, "%p debug area deleted", device);
        if (device->debug_area != NULL) {
                debug_unregister(device->debug_area);
                device->debug_area = NULL;
        }
        device->state = DASD_STATE_KNOWN;
+       return 0;
 }
 
 /*
@@ -219,7 +227,7 @@ dasd_state_basic_to_known(struct dasd_device * device)
  * In case the analysis returns an error, the device setup is stopped
  * (a fake disk was already added to allow formatting).
  */
-static inline int
+static int
 dasd_state_basic_to_ready(struct dasd_device * device)
 {
        int rc;
@@ -247,25 +255,31 @@ dasd_state_basic_to_ready(struct dasd_device * device)
  * Forget format information. Check if the target level is basic
  * and if it is create fake disk for formatting.
  */
-static inline void
+static int
 dasd_state_ready_to_basic(struct dasd_device * device)
 {
-       dasd_flush_ccw_queue(device, 0);
+       int rc;
+
+       rc = dasd_flush_ccw_queue(device, 0);
+       if (rc)
+               return rc;
        dasd_destroy_partitions(device);
        dasd_flush_request_queue(device);
        device->blocks = 0;
        device->bp_block = 0;
        device->s2b_shift = 0;
        device->state = DASD_STATE_BASIC;
+       return 0;
 }
 
 /*
  * Back to basic.
  */
-static inline void
+static int
 dasd_state_unfmt_to_basic(struct dasd_device * device)
 {
        device->state = DASD_STATE_BASIC;
+       return 0;
 }
 
 /*
@@ -273,7 +287,7 @@ dasd_state_unfmt_to_basic(struct dasd_device * device)
  * the requeueing of requests from the linux request queue to the
  * ccw queue.
  */
-static inline int
+static int
 dasd_state_ready_to_online(struct dasd_device * device)
 {
        device->state = DASD_STATE_ONLINE;
@@ -284,16 +298,17 @@ dasd_state_ready_to_online(struct dasd_device * device)
 /*
  * Stop the requeueing of requests again.
  */
-static inline void
+static int
 dasd_state_online_to_ready(struct dasd_device * device)
 {
        device->state = DASD_STATE_READY;
+       return 0;
 }
 
 /*
  * Device startup state changes.
  */
-static inline int
+static int
 dasd_increase_state(struct dasd_device *device)
 {
        int rc;
@@ -329,30 +344,37 @@ dasd_increase_state(struct dasd_device *device)
 /*
  * Device shutdown state changes.
  */
-static inline int
+static int
 dasd_decrease_state(struct dasd_device *device)
 {
+       int rc;
+
+       rc = 0;
        if (device->state == DASD_STATE_ONLINE &&
            device->target <= DASD_STATE_READY)
-               dasd_state_online_to_ready(device);
+               rc = dasd_state_online_to_ready(device);
 
-       if (device->state == DASD_STATE_READY &&
+       if (!rc &&
+           device->state == DASD_STATE_READY &&
            device->target <= DASD_STATE_BASIC)
-               dasd_state_ready_to_basic(device);
+               rc = dasd_state_ready_to_basic(device);
 
-       if (device->state == DASD_STATE_UNFMT &&
+       if (!rc &&
+           device->state == DASD_STATE_UNFMT &&
            device->target <= DASD_STATE_BASIC)
-               dasd_state_unfmt_to_basic(device);
+               rc = dasd_state_unfmt_to_basic(device);
 
-       if (device->state == DASD_STATE_BASIC &&
+       if (!rc &&
+           device->state == DASD_STATE_BASIC &&
            device->target <= DASD_STATE_KNOWN)
-               dasd_state_basic_to_known(device);
+               rc = dasd_state_basic_to_known(device);
 
-       if (device->state == DASD_STATE_KNOWN &&
+       if (!rc &&
+           device->state == DASD_STATE_KNOWN &&
            device->target <= DASD_STATE_NEW)
-               dasd_state_known_to_new(device);
+               rc = dasd_state_known_to_new(device);
 
-       return 0;
+       return rc;
 }
 
 /*
@@ -701,6 +723,7 @@ dasd_term_IO(struct dasd_ccw_req * cqr)
                        cqr->retries--;
                        cqr->status = DASD_CQR_CLEAR;
                        cqr->stopclk = get_clock();
+                       cqr->starttime = 0;
                        DBF_DEV_EVENT(DBF_DEBUG, device,
                                      "terminate cqr %p successful",
                                      cqr);
@@ -978,6 +1001,7 @@ dasd_int_handler(struct ccw_device *cdev, unsigned long intparm,
            irb->scsw.fctl & SCSW_FCTL_CLEAR_FUNC) {
                cqr->status = DASD_CQR_QUEUED;
                dasd_clear_timer(device);
+               wake_up(&dasd_flush_wq);
                dasd_schedule_bh(device);
                return;
        }
@@ -1241,6 +1265,10 @@ __dasd_check_expire(struct dasd_device * device)
        cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list);
        if (cqr->status == DASD_CQR_IN_IO && cqr->expires != 0) {
                if (time_after_eq(jiffies, cqr->expires + cqr->starttime)) {
+                       DEV_MESSAGE(KERN_ERR, device,
+                                   "internal error - timeout (%is) expired "
+                                   "for cqr %p (%i retries left)",
+                                   (cqr->expires/HZ), cqr, cqr->retries);
                        if (device->discipline->term_IO(cqr) != 0)
                                /* Hmpf, try again in 1/10 sec */
                                dasd_set_timer(device, 10);
@@ -1285,46 +1313,100 @@ __dasd_start_head(struct dasd_device * device)
                dasd_set_timer(device, 50);
 }
 
+static inline int
+_wait_for_clear(struct dasd_ccw_req *cqr)
+{
+       return (cqr->status == DASD_CQR_QUEUED);
+}
+
 /*
- * Remove requests from the ccw queue.
+ * Remove all requests from the ccw queue (all = '1') or only block device
+ * requests in case all = '0'.
+ * Take care of the erp-chain (chained via cqr->refers) and remove either
+ * the whole erp-chain or none of the erp-requests.
+ * If a request is currently running, term_IO is called and the request
+ * is re-queued. Prior to removing the terminated request we need to wait
+ * for the clear-interrupt.
+ * In case termination is not possible we stop processing and just finishing
+ * the already moved requests.
  */
-static void
+static int
 dasd_flush_ccw_queue(struct dasd_device * device, int all)
 {
+       struct dasd_ccw_req *cqr, *orig, *n;
+       int rc, i;
+
        struct list_head flush_queue;
-       struct list_head *l, *n;
-       struct dasd_ccw_req *cqr;
 
        INIT_LIST_HEAD(&flush_queue);
        spin_lock_irq(get_ccwdev_lock(device->cdev));
-       list_for_each_safe(l, n, &device->ccw_queue) {
-               cqr = list_entry(l, struct dasd_ccw_req, list);
+       rc = 0;
+restart:
+       list_for_each_entry_safe(cqr, n, &device->ccw_queue, list) {
+               /* get original request of erp request-chain */
+               for (orig = cqr; orig->refers != NULL; orig = orig->refers);
+
                /* Flush all request or only block device requests? */
-               if (all == 0 && cqr->callback == dasd_end_request_cb)
+               if (all == 0 && cqr->callback != dasd_end_request_cb &&
+                   orig->callback != dasd_end_request_cb) {
                        continue;
-               if (cqr->status == DASD_CQR_IN_IO)
-                       device->discipline->term_IO(cqr);
-               if (cqr->status != DASD_CQR_DONE ||
-                   cqr->status != DASD_CQR_FAILED) {
-                       cqr->status = DASD_CQR_FAILED;
+               }
+               /* Check status and move request to flush_queue */
+               switch (cqr->status) {
+               case DASD_CQR_IN_IO:
+                       rc = device->discipline->term_IO(cqr);
+                       if (rc) {
+                               /* unable to terminate requeust */
+                               DEV_MESSAGE(KERN_ERR, device,
+                                           "dasd flush ccw_queue is unable "
+                                           " to terminate request %p",
+                                           cqr);
+                               /* stop flush processing */
+                               goto finished;
+                       }
+                       break;
+               case DASD_CQR_QUEUED:
+               case DASD_CQR_ERROR:
+                       /* set request to FAILED */
                        cqr->stopclk = get_clock();
+                       cqr->status = DASD_CQR_FAILED;
+                       break;
+               default: /* do not touch the others */
+                       break;
+               }
+               /* Rechain request (including erp chain) */
+               for (i = 0; cqr != NULL; cqr = cqr->refers, i++) {
+                       cqr->endclk = get_clock();
+                       list_move_tail(&cqr->list, &flush_queue);
+               }
+               if (i > 1)
+                       /* moved more than one request - need to restart */
+                       goto restart;
+       }
+
+finished:
+       spin_unlock_irq(get_ccwdev_lock(device->cdev));
+       /* Now call the callback function of flushed requests */
+restart_cb:
+       list_for_each_entry_safe(cqr, n, &flush_queue, list) {
+               if (cqr->status == DASD_CQR_CLEAR) {
+                       /* wait for clear interrupt! */
+                       wait_event(dasd_flush_wq, _wait_for_clear(cqr));
+                       cqr->status = DASD_CQR_FAILED;
                }
                /* Process finished ERP request. */
                if (cqr->refers) {
                        __dasd_process_erp(device, cqr);
-                       continue;
+                       /* restart list_for_xx loop since dasd_process_erp
+                        * might remove multiple elements */
+                       goto restart_cb;
                }
-               /* Rechain request on device request queue */
+               /* call the callback function */
                cqr->endclk = get_clock();
-               list_move_tail(&cqr->list, &flush_queue);
-       }
-       spin_unlock_irq(get_ccwdev_lock(device->cdev));
-       /* Now call the callback function of flushed requests */
-       list_for_each_safe(l, n, &flush_queue) {
-               cqr = list_entry(l, struct dasd_ccw_req, list);
                if (cqr->callback != NULL)
                        (cqr->callback)(cqr, cqr->callback_data);
        }
+       return rc;
 }
 
 /*
@@ -1510,10 +1592,8 @@ dasd_sleep_on_interruptible(struct dasd_ccw_req * cqr)
                        if (device->discipline->term_IO) {
                                cqr->retries = -1;
                                device->discipline->term_IO(cqr);
-                               /*nished =
-                                * wait (non-interruptible) for final status
-                                * because signal ist still pending
-                                */
+                               /* wait (non-interruptible) for final status
+                                * because signal ist still pending */
                                spin_unlock_irq(get_ccwdev_lock(device->cdev));
                                wait_event(wait_q, _wait_for_wakeup(cqr));
                                spin_lock_irq(get_ccwdev_lock(device->cdev));
@@ -1546,19 +1626,11 @@ static inline int
 _dasd_term_running_cqr(struct dasd_device *device)
 {
        struct dasd_ccw_req *cqr;
-       int rc;
 
        if (list_empty(&device->ccw_queue))
                return 0;
        cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, list);
-       rc = device->discipline->term_IO(cqr);
-       if (rc == 0) {
-               /* termination successful */
-               cqr->status = DASD_CQR_QUEUED;
-               cqr->startclk = cqr->stopclk = 0;
-               cqr->starttime = 0;
-       }
-       return rc;
+       return device->discipline->term_IO(cqr);
 }
 
 int
@@ -1726,10 +1798,7 @@ dasd_flush_request_queue(struct dasd_device * device)
                return;
 
        spin_lock_irq(&device->request_queue_lock);
-       while (!list_empty(&device->request_queue->queue_head)) {
-               req = elv_next_request(device->request_queue);
-               if (req == NULL)
-                       break;
+       while ((req = elv_next_request(device->request_queue))) {
                blkdev_dequeue_request(req);
                dasd_end_request(req, 0);
        }
@@ -2091,6 +2160,7 @@ dasd_init(void)
        int rc;
 
        init_waitqueue_head(&dasd_init_waitq);
+       init_waitqueue_head(&dasd_flush_wq);
 
        /* register 'common' DASD debug area, used for all DBF_XXX calls */
        dasd_debug_area = debug_register("dasd", 1, 2, 8 * sizeof (long));
index 4c272b7..d163632 100644 (file)
@@ -83,10 +83,12 @@ dasd_gendisk_alloc(struct dasd_device *device)
 void
 dasd_gendisk_free(struct dasd_device *device)
 {
-       del_gendisk(device->gdp);
-       device->gdp->queue = NULL;
-       put_disk(device->gdp);
-       device->gdp = NULL;
+       if (device->gdp) {
+               del_gendisk(device->gdp);
+               device->gdp->queue = NULL;
+               put_disk(device->gdp);
+               device->gdp = NULL;
+       }
 }
 
 /*
index 3cba6c9..38954f5 100644 (file)
@@ -183,11 +183,9 @@ ccwgroup_create(struct device *root,
 
        gdev->creator_id = creator_id;
        gdev->count = argc;
-       gdev->dev = (struct device ) {
-               .bus = &ccwgroup_bus_type,
-               .parent = root,
-               .release = ccwgroup_release,
-       };
+       gdev->dev.bus = &ccwgroup_bus_type;
+       gdev->dev.parent = root;
+       gdev->dev.release = ccwgroup_release;
 
        snprintf (gdev->dev.bus_id, BUS_ID_SIZE, "%s",
                        gdev->cdev[0]->dev.bus_id);
@@ -391,10 +389,8 @@ int
 ccwgroup_driver_register (struct ccwgroup_driver *cdriver)
 {
        /* register our new driver with the core */
-       cdriver->driver = (struct device_driver) {
-               .bus = &ccwgroup_bus_type,
-               .name = cdriver->name,
-       };
+       cdriver->driver.bus = &ccwgroup_bus_type;
+       cdriver->driver.name = cdriver->name;
 
        return driver_register(&cdriver->driver);
 }
index 61ce3f1..c28444a 100644 (file)
@@ -238,8 +238,6 @@ s390_subchannel_remove_chpid(struct device *dev, void *data)
        /* Check for single path devices. */
        if (sch->schib.pmcw.pim == 0x80)
                goto out_unreg;
-       if (sch->vpm == mask)
-               goto out_unreg;
 
        if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
            (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
@@ -258,6 +256,8 @@ s390_subchannel_remove_chpid(struct device *dev, void *data)
        /* trigger path verification. */
        if (sch->driver && sch->driver->verify)
                sch->driver->verify(&sch->dev);
+       else if (sch->vpm == mask)
+               goto out_unreg;
 out_unlock:
        spin_unlock_irq(&sch->lock);
        return 0;
@@ -1391,10 +1391,8 @@ new_channel_path(int chpid)
        /* fill in status, etc. */
        chp->id = chpid;
        chp->state = 1;
-       chp->dev = (struct device) {
-               .parent  = &css[0]->device,
-               .release = chp_release,
-       };
+       chp->dev.parent = &css[0]->device;
+       chp->dev.release = chp_release;
        snprintf(chp->dev.bus_id, BUS_ID_SIZE, "chp0.%x", chpid);
 
        /* Obtain channel path description and fill it in. */
index 585fa04..646da56 100644 (file)
@@ -556,12 +556,11 @@ get_disc_ccwdev_by_devno(unsigned int devno, unsigned int ssid,
                         struct ccw_device *sibling)
 {
        struct device *dev;
-       struct match_data data = {
-               .devno   = devno,
-               .ssid    = ssid,
-               .sibling = sibling,
-       };
+       struct match_data data;
 
+       data.devno = devno;
+       data.ssid = ssid;
+       data.sibling = sibling;
        dev = bus_find_device(&ccw_bus_type, NULL, &data, match_devno);
 
        return dev ? to_ccwdev(dev) : NULL;
@@ -835,10 +834,8 @@ io_subchannel_probe (struct subchannel *sch)
                return -ENOMEM;
        }
        atomic_set(&cdev->private->onoff, 0);
-       cdev->dev = (struct device) {
-               .parent = &sch->dev,
-               .release = ccw_device_release,
-       };
+       cdev->dev.parent = &sch->dev;
+       cdev->dev.release = ccw_device_release;
        INIT_LIST_HEAD(&cdev->private->kick_work.entry);
        /* Do first half of device_register. */
        device_initialize(&cdev->dev);
@@ -977,9 +974,7 @@ ccw_device_console_enable (struct ccw_device *cdev, struct subchannel *sch)
        int rc;
 
        /* Initialize the ccw_device structure. */
-       cdev->dev = (struct device) {
-               .parent = &sch->dev,
-       };
+       cdev->dev.parent= &sch->dev;
        rc = io_subchannel_recog(cdev, sch);
        if (rc)
                return rc;
index 6d91c2e..35e162b 100644 (file)
@@ -267,12 +267,10 @@ ccw_device_recog_done(struct ccw_device *cdev, int state)
                        notify = 1;
                }
                /* fill out sense information */
-               cdev->id = (struct ccw_device_id) {
-                       .cu_type   = cdev->private->senseid.cu_type,
-                       .cu_model  = cdev->private->senseid.cu_model,
-                       .dev_type  = cdev->private->senseid.dev_type,
-                       .dev_model = cdev->private->senseid.dev_model,
-               };
+               cdev->id.cu_type   = cdev->private->senseid.cu_type;
+               cdev->id.cu_model  = cdev->private->senseid.cu_model;
+               cdev->id.dev_type  = cdev->private->senseid.dev_type;
+               cdev->id.dev_model = cdev->private->senseid.dev_model;
                if (notify) {
                        cdev->private->state = DEV_STATE_OFFLINE;
                        if (same_dev) {
@@ -566,12 +564,10 @@ ccw_device_verify_done(struct ccw_device *cdev, int err)
                /* Deliver fake irb to device driver, if needed. */
                if (cdev->private->flags.fake_irb) {
                        memset(&cdev->private->irb, 0, sizeof(struct irb));
-                       cdev->private->irb.scsw = (struct scsw) {
-                               .cc = 1,
-                               .fctl = SCSW_FCTL_START_FUNC,
-                               .actl = SCSW_ACTL_START_PEND,
-                               .stctl = SCSW_STCTL_STATUS_PEND,
-                       };
+                       cdev->private->irb.scsw.cc = 1;
+                       cdev->private->irb.scsw.fctl = SCSW_FCTL_START_FUNC;
+                       cdev->private->irb.scsw.actl = SCSW_ACTL_START_PEND;
+                       cdev->private->irb.scsw.stctl = SCSW_STCTL_STATUS_PEND;
                        cdev->private->flags.fake_irb = 0;
                        if (cdev->handler)
                                cdev->handler(cdev, cdev->private->intparm,
index 32610fd..1693a10 100644 (file)
 #include "device.h"
 #include "ioasm.h"
 
+/*
+ * Helper function called from interrupt context to decide whether an
+ * operation should be tried again.
+ */
+static int __ccw_device_should_retry(struct scsw *scsw)
+{
+       /* CC is only valid if start function bit is set. */
+       if ((scsw->fctl & SCSW_FCTL_START_FUNC) && scsw->cc == 1)
+               return 1;
+       /* No more activity. For sense and set PGID we stubbornly try again. */
+       if (!scsw->actl)
+               return 1;
+       return 0;
+}
+
 /*
  * Start Sense Path Group ID helper function. Used in ccw_device_recog
  * and ccw_device_sense_pgid.
@@ -155,10 +170,10 @@ ccw_device_sense_pgid_irq(struct ccw_device *cdev, enum dev_event dev_event)
        int ret;
 
        irb = (struct irb *) __LC_IRB;
-       /* Retry sense pgid for cc=1. */
+
        if (irb->scsw.stctl ==
            (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
-               if (irb->scsw.cc == 1) {
+               if (__ccw_device_should_retry(&irb->scsw)) {
                        ret = __ccw_device_sense_pgid_start(cdev);
                        if (ret && ret != -EBUSY)
                                ccw_device_sense_pgid_done(cdev, ret);
@@ -391,10 +406,10 @@ ccw_device_verify_irq(struct ccw_device *cdev, enum dev_event dev_event)
        int ret;
 
        irb = (struct irb *) __LC_IRB;
-       /* Retry set pgid for cc=1. */
+
        if (irb->scsw.stctl ==
            (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
-               if (irb->scsw.cc == 1)
+               if (__ccw_device_should_retry(&irb->scsw))
                        __ccw_device_verify_start(cdev);
                return;
        }
@@ -494,10 +509,10 @@ ccw_device_disband_irq(struct ccw_device *cdev, enum dev_event dev_event)
        int ret;
 
        irb = (struct irb *) __LC_IRB;
-       /* Retry set pgid for cc=1. */
+
        if (irb->scsw.stctl ==
            (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
-               if (irb->scsw.cc == 1)
+               if (__ccw_device_should_retry(&irb->scsw))
                        __ccw_device_disband_start(cdev);
                return;
        }
index 2d20caf..a9bb3cb 100644 (file)
@@ -123,7 +123,8 @@ enum {
        ich6_sata               = 4,
        ich6_sata_ahci          = 5,
        ich6m_sata_ahci         = 6,
-       ich8_sata_ahci          = 7,
+       ich7m_sata_ahci         = 7,
+       ich8_sata_ahci          = 8,
 
        /* constants for mapping table */
        P0                      = 0,  /* port 0 */
@@ -188,7 +189,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
        /* 82801GB/GR/GH (ICH7, identical to ICH6) */
        { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
        /* 2801GBM/GHM (ICH7M, identical to ICH6M) */
-       { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+       { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci },
        /* Enterprise Southbridge 2 (where's the datasheet?) */
        { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
        /* SATA Controller 1 IDE (ICH8, no datasheet yet) */
@@ -336,6 +337,24 @@ static const struct piix_map_db ich6m_map_db = {
        },
 };
 
+static const struct piix_map_db ich7m_map_db = {
+       .mask = 0x3,
+       .port_enable = 0x5,
+       .present_shift = 4,
+
+       /* Map 01b isn't specified in the doc but some notebooks use
+        * it anyway.  ATM, the only case spotted carries subsystem ID
+        * 1025:0107.  This is the only difference from ich6m.
+        */
+       .map = {
+               /* PM   PS   SM   SS       MAP */
+               {  P0,  P2,  RV,  RV }, /* 00b */
+               { IDE, IDE,  P1,  P3 }, /* 01b */
+               {  P0,  P2, IDE, IDE }, /* 10b */
+               {  RV,  RV,  RV,  RV },
+       },
+};
+
 static const struct piix_map_db ich8_map_db = {
        .mask = 0x3,
        .port_enable = 0x3,
@@ -355,6 +374,7 @@ static const struct piix_map_db *piix_map_db_table[] = {
        [ich6_sata]             = &ich6_map_db,
        [ich6_sata_ahci]        = &ich6_map_db,
        [ich6m_sata_ahci]       = &ich6m_map_db,
+       [ich7m_sata_ahci]       = &ich7m_map_db,
        [ich8_sata_ahci]        = &ich8_map_db,
 };
 
@@ -444,6 +464,18 @@ static struct ata_port_info piix_port_info[] = {
                .port_ops       = &piix_sata_ops,
        },
 
+       /* ich7m_sata_ahci */
+       {
+               .sht            = &piix_sht,
+               .host_flags     = ATA_FLAG_SATA |
+                                 PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+                                 PIIX_FLAG_AHCI,
+               .pio_mask       = 0x1f, /* pio0-4 */
+               .mwdma_mask     = 0x07, /* mwdma0-2 */
+               .udma_mask      = 0x7f, /* udma0-6 */
+               .port_ops       = &piix_sata_ops,
+       },
+
        /* ich8_sata_ahci */
        {
                .sht            = &piix_sht,
index 73dd6c8..427b73a 100644 (file)
@@ -1256,10 +1256,15 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
        swap_buf_le16(id, ATA_ID_WORDS);
 
        /* sanity check */
-       if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) {
-               rc = -EINVAL;
-               reason = "device reports illegal type";
-               goto err_out;
+       rc = -EINVAL;
+       reason = "device reports illegal type";
+
+       if (class == ATA_DEV_ATA) {
+               if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
+                       goto err_out;
+       } else {
+               if (ata_id_is_ata(id))
+                       goto err_out;
        }
 
        if (post_reset && class == ATA_DEV_ATA) {
index 1053c7c..fa38a41 100644 (file)
@@ -1961,8 +1961,7 @@ comreset_retry:
        timeout = jiffies + msecs_to_jiffies(200);
        do {
                sata_scr_read(ap, SCR_STATUS, &sstatus);
-               sstatus &= 0x3;
-               if ((sstatus == 3) || (sstatus == 0))
+               if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
                        break;
 
                __msleep(1, can_sleep);
index 01d4036..a3727af 100644 (file)
@@ -77,6 +77,7 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
 static void vt6420_error_handler(struct ata_port *ap);
 
 static const struct pci_device_id svia_pci_tbl[] = {
+       { 0x1106, 0x0591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
        { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
        { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 },
 
index a8ed5a2..3d355d0 100644 (file)
@@ -466,7 +466,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
        struct scsi_device *sdev = scmd->device;
        struct Scsi_Host *shost = sdev->host;
        int old_result = scmd->result;
-       DECLARE_COMPLETION(done);
+       DECLARE_COMPLETION_ONSTACK(done);
        unsigned long timeleft;
        unsigned long flags;
        unsigned char old_cmnd[MAX_COMMAND_SIZE];
index cd1979d..851e483 100644 (file)
@@ -458,11 +458,11 @@ static int pci_siig_setup(struct serial_private *priv,
  * growing *huge*, we use this function to collapse some 70 entries
  * in the PCI table into one, for sanity's and compactness's sake.
  */
-static unsigned short timedia_single_port[] = {
+static const unsigned short timedia_single_port[] = {
        0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
 };
 
-static unsigned short timedia_dual_port[] = {
+static const unsigned short timedia_dual_port[] = {
        0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
        0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 
        0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 
@@ -470,35 +470,34 @@ static unsigned short timedia_dual_port[] = {
        0xD079, 0
 };
 
-static unsigned short timedia_quad_port[] = {
+static const unsigned short timedia_quad_port[] = {
        0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 
        0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 
        0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
        0xB157, 0
 };
 
-static unsigned short timedia_eight_port[] = {
+static const unsigned short timedia_eight_port[] = {
        0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 
        0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
 };
 
 static const struct timedia_struct {
        int num;
-       unsigned short *ids;
+       const unsigned short *ids;
 } timedia_data[] = {
        { 1, timedia_single_port },
        { 2, timedia_dual_port },
        { 4, timedia_quad_port },
-       { 8, timedia_eight_port },
-       { 0, NULL }
+       { 8, timedia_eight_port }
 };
 
 static int pci_timedia_init(struct pci_dev *dev)
 {
-       unsigned short *ids;
+       const unsigned short *ids;
        int i, j;
 
-       for (i = 0; timedia_data[i].num; i++) {
+       for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
                ids = timedia_data[i].ids;
                for (j = 0; ids[j]; j++)
                        if (dev->subsystem_device == ids[j])
index 80ef7d4..372e47f 100644 (file)
@@ -2377,6 +2377,9 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
                return (port1->iobase == port2->iobase) &&
                       (port1->hub6   == port2->hub6);
        case UPIO_MEM:
+       case UPIO_MEM32:
+       case UPIO_AU:
+       case UPIO_TSI:
                return (port1->mapbase == port2->mapbase);
        }
        return 0;
index 3015733..cbede06 100644 (file)
@@ -1579,7 +1579,7 @@ static int __init serial_console_setup(struct console *co, char *options)
        h8300_sci_enable(port, sci_enable);
 #endif
 #elif defined(CONFIG_SUPERH64)
-       port->uartclk = current_cpu_info.module_clock * 16;
+       port->uartclk = current_cpu_data.module_clock * 16;
 #else
        {
                struct clk *clk = clk_get("module_clk");
@@ -1720,7 +1720,7 @@ static int __init sci_init(void)
 #if defined(__H8300H__) || defined(__H8300S__)
                        sciport->port.uartclk = CONFIG_CPU_CLOCK;
 #elif defined(CONFIG_SUPERH64)
-                       sciport->port.uartclk = current_cpu_info.module_clock * 16;
+                       sciport->port.uartclk = current_cpu_data.module_clock * 16;
 #else
                        struct clk *clk = clk_get("module_clk");
                        sciport->port.uartclk = clk_get_rate(clk) * 16;
index 4fe1bec..30299c6 100644 (file)
@@ -117,6 +117,8 @@ struct eth_dev {
        struct usb_ep           *in_ep, *out_ep, *status_ep;
        const struct usb_endpoint_descriptor
                                *in, *out, *status;
+
+       spinlock_t              req_lock;
        struct list_head        tx_reqs, rx_reqs;
 
        struct net_device       *net;
@@ -1066,21 +1068,31 @@ static void eth_reset_config (struct eth_dev *dev)
         */
        if (dev->in) {
                usb_ep_disable (dev->in_ep);
+               spin_lock(&dev->req_lock);
                while (likely (!list_empty (&dev->tx_reqs))) {
                        req = container_of (dev->tx_reqs.next,
                                                struct usb_request, list);
                        list_del (&req->list);
+
+                       spin_unlock(&dev->req_lock);
                        usb_ep_free_request (dev->in_ep, req);
+                       spin_lock(&dev->req_lock);
                }
+               spin_unlock(&dev->req_lock);
        }
        if (dev->out) {
                usb_ep_disable (dev->out_ep);
+               spin_lock(&dev->req_lock);
                while (likely (!list_empty (&dev->rx_reqs))) {
                        req = container_of (dev->rx_reqs.next,
                                                struct usb_request, list);
                        list_del (&req->list);
+
+                       spin_unlock(&dev->req_lock);
                        usb_ep_free_request (dev->out_ep, req);
+                       spin_lock(&dev->req_lock);
                }
+               spin_unlock(&dev->req_lock);
        }
 
        if (dev->status) {
@@ -1659,9 +1671,9 @@ enomem:
        if (retval) {
                DEBUG (dev, "rx submit --> %d\n", retval);
                dev_kfree_skb_any (skb);
-               spin_lock (&dev->lock);
+               spin_lock(&dev->req_lock);
                list_add (&req->list, &dev->rx_reqs);
-               spin_unlock (&dev->lock);
+               spin_unlock(&dev->req_lock);
        }
        return retval;
 }
@@ -1730,8 +1742,9 @@ quiesce:
                dev_kfree_skb_any (skb);
        if (!netif_running (dev->net)) {
 clean:
-               /* nobody reading rx_reqs, so no dev->lock */
+               spin_lock(&dev->req_lock);
                list_add (&req->list, &dev->rx_reqs);
+               spin_unlock(&dev->req_lock);
                req = NULL;
        }
        if (req)
@@ -1782,15 +1795,18 @@ static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
 {
        int status;
 
+       spin_lock(&dev->req_lock);
        status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
        if (status < 0)
                goto fail;
        status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
        if (status < 0)
                goto fail;
-       return 0;
+       goto done;
 fail:
        DEBUG (dev, "can't alloc requests\n");
+done:
+       spin_unlock(&dev->req_lock);
        return status;
 }
 
@@ -1800,21 +1816,21 @@ static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags)
        unsigned long           flags;
 
        /* fill unused rxq slots with some skb */
-       spin_lock_irqsave (&dev->lock, flags);
+       spin_lock_irqsave(&dev->req_lock, flags);
        while (!list_empty (&dev->rx_reqs)) {
                req = container_of (dev->rx_reqs.next,
                                struct usb_request, list);
                list_del_init (&req->list);
-               spin_unlock_irqrestore (&dev->lock, flags);
+               spin_unlock_irqrestore(&dev->req_lock, flags);
 
                if (rx_submit (dev, req, gfp_flags) < 0) {
                        defer_kevent (dev, WORK_RX_MEMORY);
                        return;
                }
 
-               spin_lock_irqsave (&dev->lock, flags);
+               spin_lock_irqsave(&dev->req_lock, flags);
        }
-       spin_unlock_irqrestore (&dev->lock, flags);
+       spin_unlock_irqrestore(&dev->req_lock, flags);
 }
 
 static void eth_work (void *_dev)
@@ -1848,9 +1864,9 @@ static void tx_complete (struct usb_ep *ep, struct usb_request *req)
        }
        dev->stats.tx_packets++;
 
-       spin_lock (&dev->lock);
+       spin_lock(&dev->req_lock);
        list_add (&req->list, &dev->tx_reqs);
-       spin_unlock (&dev->lock);
+       spin_unlock(&dev->req_lock);
        dev_kfree_skb_any (skb);
 
        atomic_dec (&dev->tx_qlen);
@@ -1896,12 +1912,12 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
                /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
        }
 
-       spin_lock_irqsave (&dev->lock, flags);
+       spin_lock_irqsave(&dev->req_lock, flags);
        req = container_of (dev->tx_reqs.next, struct usb_request, list);
        list_del (&req->list);
        if (list_empty (&dev->tx_reqs))
                netif_stop_queue (net);
-       spin_unlock_irqrestore (&dev->lock, flags);
+       spin_unlock_irqrestore(&dev->req_lock, flags);
 
        /* no buffer copies needed, unless the network stack did it
         * or the hardware can't use skb buffers.
@@ -1955,11 +1971,11 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
 drop:
                dev->stats.tx_dropped++;
                dev_kfree_skb_any (skb);
-               spin_lock_irqsave (&dev->lock, flags);
+               spin_lock_irqsave(&dev->req_lock, flags);
                if (list_empty (&dev->tx_reqs))
                        netif_start_queue (net);
                list_add (&req->list, &dev->tx_reqs);
-               spin_unlock_irqrestore (&dev->lock, flags);
+               spin_unlock_irqrestore(&dev->req_lock, flags);
        }
        return 0;
 }
@@ -2378,6 +2394,7 @@ autoconf_fail:
                return status;
        dev = netdev_priv(net);
        spin_lock_init (&dev->lock);
+       spin_lock_init (&dev->req_lock);
        INIT_WORK (&dev->work, eth_work, dev);
        INIT_LIST_HEAD (&dev->tx_reqs);
        INIT_LIST_HEAD (&dev->rx_reqs);
index 66c3f61..431e8f3 100644 (file)
@@ -372,7 +372,7 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first)
                 * need to change any toggles in this URB */
                td = list_entry(urbp->td_list.next, struct uhci_td, list);
                if (toggle > 1 || uhci_toggle(td_token(td)) == toggle) {
-                       td = list_entry(urbp->td_list.next, struct uhci_td,
+                       td = list_entry(urbp->td_list.prev, struct uhci_td,
                                        list);
                        toggle = uhci_toggle(td_token(td)) ^ 1;
 
@@ -1348,7 +1348,7 @@ static void uhci_scan_qh(struct uhci_hcd *uhci, struct uhci_qh *qh,
                }
 
                uhci_giveback_urb(uhci, qh, urb, regs);
-               if (status < 0)
+               if (status < 0 && qh->type != USB_ENDPOINT_XFER_ISOC)
                        break;
        }
 
index 8ea9c91..a2c56b2 100644 (file)
@@ -1411,17 +1411,54 @@ void hid_init_reports(struct hid_device *hid)
                warn("timeout initializing reports");
 }
 
+#define USB_VENDOR_ID_GTCO             0x078c
+#define USB_DEVICE_ID_GTCO_90          0x0090
+#define USB_DEVICE_ID_GTCO_100         0x0100
+#define USB_DEVICE_ID_GTCO_101         0x0101
+#define USB_DEVICE_ID_GTCO_103         0x0103
+#define USB_DEVICE_ID_GTCO_104         0x0104
+#define USB_DEVICE_ID_GTCO_105         0x0105
+#define USB_DEVICE_ID_GTCO_106         0x0106
+#define USB_DEVICE_ID_GTCO_107         0x0107
+#define USB_DEVICE_ID_GTCO_108         0x0108
+#define USB_DEVICE_ID_GTCO_200         0x0200
+#define USB_DEVICE_ID_GTCO_201         0x0201
+#define USB_DEVICE_ID_GTCO_202         0x0202
+#define USB_DEVICE_ID_GTCO_203         0x0203
+#define USB_DEVICE_ID_GTCO_204         0x0204
+#define USB_DEVICE_ID_GTCO_205         0x0205
+#define USB_DEVICE_ID_GTCO_206         0x0206
+#define USB_DEVICE_ID_GTCO_207         0x0207
+#define USB_DEVICE_ID_GTCO_300         0x0300
+#define USB_DEVICE_ID_GTCO_301         0x0301
+#define USB_DEVICE_ID_GTCO_302         0x0302
+#define USB_DEVICE_ID_GTCO_303         0x0303
+#define USB_DEVICE_ID_GTCO_304         0x0304
+#define USB_DEVICE_ID_GTCO_305         0x0305
+#define USB_DEVICE_ID_GTCO_306         0x0306
+#define USB_DEVICE_ID_GTCO_307         0x0307
+#define USB_DEVICE_ID_GTCO_308         0x0308
+#define USB_DEVICE_ID_GTCO_309         0x0309
+#define USB_DEVICE_ID_GTCO_400         0x0400
+#define USB_DEVICE_ID_GTCO_401         0x0401
+#define USB_DEVICE_ID_GTCO_402         0x0402
+#define USB_DEVICE_ID_GTCO_403         0x0403
+#define USB_DEVICE_ID_GTCO_404         0x0404
+#define USB_DEVICE_ID_GTCO_405         0x0405
+#define USB_DEVICE_ID_GTCO_500         0x0500
+#define USB_DEVICE_ID_GTCO_501         0x0501
+#define USB_DEVICE_ID_GTCO_502         0x0502
+#define USB_DEVICE_ID_GTCO_503         0x0503
+#define USB_DEVICE_ID_GTCO_504         0x0504
+#define USB_DEVICE_ID_GTCO_1000                0x1000
+#define USB_DEVICE_ID_GTCO_1001                0x1001
+#define USB_DEVICE_ID_GTCO_1002                0x1002
+#define USB_DEVICE_ID_GTCO_1003                0x1003
+#define USB_DEVICE_ID_GTCO_1004                0x1004
+#define USB_DEVICE_ID_GTCO_1005                0x1005
+#define USB_DEVICE_ID_GTCO_1006                0x1006
+
 #define USB_VENDOR_ID_WACOM            0x056a
-#define USB_DEVICE_ID_WACOM_PENPARTNER 0x0000
-#define USB_DEVICE_ID_WACOM_GRAPHIRE   0x0010
-#define USB_DEVICE_ID_WACOM_INTUOS     0x0020
-#define USB_DEVICE_ID_WACOM_PL         0x0030
-#define USB_DEVICE_ID_WACOM_INTUOS2    0x0040
-#define USB_DEVICE_ID_WACOM_VOLITO     0x0060
-#define USB_DEVICE_ID_WACOM_PTU                0x0003
-#define USB_DEVICE_ID_WACOM_INTUOS3    0x00B0
-#define USB_DEVICE_ID_WACOM_CINTIQ     0x003F
-#define USB_DEVICE_ID_WACOM_DTF         0x00C0
 
 #define USB_VENDOR_ID_ACECAD           0x0460
 #define USB_DEVICE_ID_ACECAD_FLAIR     0x0004
@@ -1588,6 +1625,51 @@ static const struct hid_blacklist {
        { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_0_8_8_IF_KIT, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_90, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_100, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_101, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_103, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_104, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_105, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_106, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_107, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_108, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_200, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_201, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_202, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_203, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_204, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_205, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_206, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_207, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_300, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_301, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_302, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_303, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_304, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_305, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_306, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_307, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_308, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_309, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_400, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_401, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_503, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_504, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1000, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1001, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1002, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1003, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
+       { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
@@ -1617,49 +1699,6 @@ static const struct hid_blacklist {
        { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 2, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 3, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 4, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 1, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 2, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 3, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS + 4, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 1, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 2, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 3, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 4, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 5, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 7, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 8, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PL + 9, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 1, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 2, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 3, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 4, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 5, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 1, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 2, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 3, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO + 4, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 5, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 6, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 3, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 4, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE },
-       { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF + 3, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
        { USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K, HID_QUIRK_IGNORE },
@@ -1778,6 +1817,10 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
        char *rdesc;
        int n, len, insize = 0;
 
+        /* Ignore all Wacom devices */
+        if (dev->descriptor.idVendor == USB_VENDOR_ID_WACOM)
+                return NULL;
+
        for (n = 0; hid_blacklist[n].idVendor; n++)
                if ((hid_blacklist[n].idVendor == le16_to_cpu(dev->descriptor.idVendor)) &&
                        (hid_blacklist[n].idProduct == le16_to_cpu(dev->descriptor.idProduct)))
index 3b175aa..a338bf4 100644 (file)
@@ -286,7 +286,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
 {
        *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
-       *x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+       *y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
        *press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
        *touch = ~pkt[7] & 0x20;
 
index 575a4e6..7b45fd3 100644 (file)
@@ -810,12 +810,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
        if (yld == NULL)
                return err;
 
-        if (yld->urb_irq) {
-               usb_kill_urb(yld->urb_irq);
-               usb_free_urb(yld->urb_irq);
-       }
-        if (yld->urb_ctl)
-               usb_free_urb(yld->urb_ctl);
+       usb_kill_urb(yld->urb_irq);     /* parameter validation in core/urb */
+       usb_kill_urb(yld->urb_ctl);     /* parameter validation in core/urb */
+
         if (yld->idev) {
                if (err)
                        input_free_device(yld->idev);
@@ -831,6 +828,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
        if (yld->irq_data)
                usb_buffer_free(yld->udev, USB_PKT_LEN,
                                yld->irq_data, yld->irq_dma);
+
+       usb_free_urb(yld->urb_irq);     /* parameter validation in core/urb */
+       usb_free_urb(yld->urb_ctl);     /* parameter validation in core/urb */
        kfree(yld);
        return err;
 }
index 738bd7c..e16582f 100644 (file)
@@ -3435,6 +3435,8 @@ static void sisusb_disconnect(struct usb_interface *intf)
 
 static struct usb_device_id sisusb_table [] = {
        { USB_DEVICE(0x0711, 0x0900) },
+       { USB_DEVICE(0x0711, 0x0901) },
+       { USB_DEVICE(0x0711, 0x0902) },
        { USB_DEVICE(0x182d, 0x021c) },
        { USB_DEVICE(0x182d, 0x0269) },
        { }
index a54752c..0064380 100644 (file)
@@ -131,6 +131,7 @@ struct usb_eth_dev {
 #define        VENDOR_COREGA           0x07aa
 #define        VENDOR_DLINK            0x2001
 #define        VENDOR_ELCON            0x0db7
+#define        VENDOR_ELECOM           0x056e
 #define        VENDOR_ELSA             0x05cc
 #define        VENDOR_GIGABYTE         0x1044
 #define        VENDOR_HAWKING          0x0e66
@@ -233,6 +234,8 @@ PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
                DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
                DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
+               DEFAULT_GPIO_RESET  | PEGASUS_II )
 PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
                DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
index bd09232..a72685b 100644 (file)
@@ -972,6 +972,7 @@ static void rtl8150_disconnect(struct usb_interface *intf)
        if (dev) {
                set_bit(RTL8150_UNPLUG, &dev->flags);
                tasklet_disable(&dev->tl);
+               tasklet_kill(&dev->tl);
                unregister_netdev(dev->netdev);
                unlink_all_urbs(dev);
                free_all_urbs(dev);
index 15945e8..c6115aa 100644 (file)
@@ -506,6 +506,7 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
        { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
        { },                                    /* Optional parameter entry */
        { }                                     /* Terminating entry */
 };
index 8888cd8..7729999 100644 (file)
 #define TESTO_VID                      0x128D
 #define TESTO_USB_INTERFACE_PID                0x0001
 
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID           0xD678  /* Gamma Scout online */
+
 /* Commands */
 #define FTDI_SIO_RESET                 0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL    1 /* Set the modem control register */
index 12c1694..e06a41b 100644 (file)
@@ -464,8 +464,10 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int
                length += sprintf (page+length, " path:%s", tmp);
                        
                length += sprintf (page+length, "\n");
-               if ((length + begin) > (off + count))
+               if ((length + begin) > (off + count)) {
+                       usb_serial_put(serial);
                        goto done;
+               }
                if ((length + begin) < off) {
                        begin += length;
                        length = 0;
index 4a803d6..b130e17 100644 (file)
@@ -241,16 +241,6 @@ UNUSUAL_DEV(  0x0482, 0x0103, 0x0100, 0x0100,
                "Finecam S5",
                US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
 
-/* Patch for Kyocera Finecam L3
- * Submitted by Michael Krauth <michael.krauth@web.de>
- * and Alessandro Fracchetti <al.fracchetti@tin.it>
- */
-UNUSUAL_DEV(  0x0482, 0x0105, 0x0100, 0x0100,
-               "Kyocera",
-               "Finecam L3",
-               US_SC_SCSI, US_PR_BULK, NULL,
-               US_FL_FIX_INQUIRY),
-
 /* Reported by Paul Stewart <stewart@wetlogic.net>
  * This entry is needed because the device reports Sub=ff */
 UNUSUAL_DEV(  0x04a4, 0x0004, 0x0001, 0x0001,
@@ -599,6 +589,13 @@ UNUSUAL_DEV(  0x054c, 0x0099, 0x0000, 0x9999,
                 US_SC_DEVICE, US_PR_DEVICE, NULL,
                 US_FL_FIX_INQUIRY ),
 
+/* floppy reports multiple luns */
+UNUSUAL_DEV(  0x055d, 0x2020, 0x0000, 0x0210,
+               "SAMSUNG",
+               "SFD-321U [FW 0C]",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_SINGLE_LUN ),
+
                
 UNUSUAL_DEV(  0x057b, 0x0000, 0x0000, 0x0299, 
                "Y-E Data",
@@ -1257,6 +1254,13 @@ UNUSUAL_DEV(  0x0fce, 0xd008, 0x0000, 0x0000,
                US_SC_DEVICE, US_PR_DEVICE, NULL,
                US_FL_NO_WP_DETECT ),
 
+/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
+UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x0000,
+               "Sony Ericsson",
+               "M600i",
+               US_SC_DEVICE, US_PR_DEVICE, NULL,
+               US_FL_FIX_CAPACITY ),
+
 /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
  * Tested on hardware version 1.10.
  * Entry is needed only for the initializer function override.
index 106d428..276a215 100644 (file)
@@ -1800,14 +1800,15 @@ static struct backlight_properties aty128_bl_data = {
 
 static void aty128_bl_set_power(struct fb_info *info, int power)
 {
-       if (info->bl_dev == NULL)
-               return;
-
        mutex_lock(&info->bl_mutex);
-       up(&info->bl_dev->sem);
-       info->bl_dev->props->power = power;
-       __aty128_bl_update_status(info->bl_dev);
-       down(&info->bl_dev->sem);
+
+       if (info->bl_dev) {
+               down(&info->bl_dev->sem);
+               info->bl_dev->props->power = power;
+               __aty128_bl_update_status(info->bl_dev);
+               up(&info->bl_dev->sem);
+       }
+
        mutex_unlock(&info->bl_mutex);
 }
 
@@ -1842,11 +1843,11 @@ static void aty128_bl_init(struct aty128fb_par *par)
                219 * FB_BACKLIGHT_MAX / MAX_LEVEL);
        mutex_unlock(&info->bl_mutex);
 
-       up(&bd->sem);
+       down(&bd->sem);
        bd->props->brightness = aty128_bl_data.max_brightness;
        bd->props->power = FB_BLANK_UNBLANK;
        bd->props->update_status(bd);
-       down(&bd->sem);
+       up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
        mutex_lock(&pmac_backlight_mutex);
index 510e4ea..19a71f0 100644 (file)
@@ -2199,14 +2199,15 @@ static struct backlight_properties aty_bl_data = {
 
 static void aty_bl_set_power(struct fb_info *info, int power)
 {
-       if (info->bl_dev == NULL)
-               return;
-
        mutex_lock(&info->bl_mutex);
-       up(&info->bl_dev->sem);
-       info->bl_dev->props->power = power;
-       __aty_bl_update_status(info->bl_dev);
-       down(&info->bl_dev->sem);
+
+       if (info->bl_dev) {
+               down(&info->bl_dev->sem);
+               info->bl_dev->props->power = power;
+               __aty_bl_update_status(info->bl_dev);
+               up(&info->bl_dev->sem);
+       }
+
        mutex_unlock(&info->bl_mutex);
 }
 
@@ -2237,11 +2238,11 @@ static void aty_bl_init(struct atyfb_par *par)
                0xFF * FB_BACKLIGHT_MAX / MAX_LEVEL);
        mutex_unlock(&info->bl_mutex);
 
-       up(&bd->sem);
+       down(&bd->sem);
        bd->props->brightness = aty_bl_data.max_brightness;
        bd->props->power = FB_BLANK_UNBLANK;
        bd->props->update_status(bd);
-       down(&bd->sem);
+       up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
        mutex_lock(&pmac_backlight_mutex);
index 1755ddd..585eb7b 100644 (file)
@@ -195,11 +195,11 @@ void radeonfb_bl_init(struct radeonfb_info *rinfo)
                217 * FB_BACKLIGHT_MAX / MAX_RADEON_LEVEL);
        mutex_unlock(&rinfo->info->bl_mutex);
 
-       up(&bd->sem);
+       down(&bd->sem);
        bd->props->brightness = radeon_bl_data.max_brightness;
        bd->props->power = FB_BLANK_UNBLANK;
        bd->props->update_status(bd);
-       down(&bd->sem);
+       up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
        mutex_lock(&pmac_backlight_mutex);
index 14c37c4..5b75ae4 100644 (file)
@@ -112,13 +112,15 @@ static struct backlight_properties nvidia_bl_data = {
 
 void nvidia_bl_set_power(struct fb_info *info, int power)
 {
-       if (info->bl_dev == NULL)
-               return;
        mutex_lock(&info->bl_mutex);
-       up(&info->bl_dev->sem);
-       info->bl_dev->props->power = power;
-       __nvidia_bl_update_status(info->bl_dev);
-       down(&info->bl_dev->sem);
+
+       if (info->bl_dev) {
+               down(&info->bl_dev->sem);
+               info->bl_dev->props->power = power;
+               __nvidia_bl_update_status(info->bl_dev);
+               up(&info->bl_dev->sem);
+       }
+
        mutex_unlock(&info->bl_mutex);
 }
 
@@ -153,11 +155,11 @@ void nvidia_bl_init(struct nvidia_par *par)
                0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL);
        mutex_unlock(&info->bl_mutex);
 
-       up(&bd->sem);
+       down(&bd->sem);
        bd->props->brightness = nvidia_bl_data.max_brightness;
        bd->props->power = FB_BLANK_UNBLANK;
        bd->props->update_status(bd);
-       down(&bd->sem);
+       up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
        mutex_lock(&pmac_backlight_mutex);
index 511c362..67d1e1c 100644 (file)
@@ -354,14 +354,15 @@ static struct backlight_properties riva_bl_data = {
 
 static void riva_bl_set_power(struct fb_info *info, int power)
 {
-       if (info->bl_dev == NULL)
-               return;
-
        mutex_lock(&info->bl_mutex);
-       up(&info->bl_dev->sem);
-       info->bl_dev->props->power = power;
-       __riva_bl_update_status(info->bl_dev);
-       down(&info->bl_dev->sem);
+
+       if (info->bl_dev) {
+               down(&info->bl_dev->sem);
+               info->bl_dev->props->power = power;
+               __riva_bl_update_status(info->bl_dev);
+               up(&info->bl_dev->sem);
+       }
+
        mutex_unlock(&info->bl_mutex);
 }
 
@@ -396,11 +397,11 @@ static void riva_bl_init(struct riva_par *par)
                0x534 * FB_BACKLIGHT_MAX / MAX_LEVEL);
        mutex_unlock(&info->bl_mutex);
 
-       up(&bd->sem);
+       down(&bd->sem);
        bd->props->brightness = riva_bl_data.max_brightness;
        bd->props->power = FB_BLANK_UNBLANK;
        bd->props->update_status(bd);
-       down(&bd->sem);
+       up(&bd->sem);
 
 #ifdef CONFIG_PMAC_BACKLIGHT
        mutex_lock(&pmac_backlight_mutex);
index 105761e..9aeb58a 100644 (file)
@@ -82,7 +82,6 @@ static int construct_dentry(struct qstr *qstring, struct file *file,
                        if(*ptmp_inode == NULL)
                                return rc;
                        rc = 1;
-                       d_instantiate(tmp_dentry, *ptmp_inode);
                }
        } else {
                tmp_dentry = d_alloc(file->f_dentry, qstring);
@@ -99,9 +98,7 @@ static int construct_dentry(struct qstr *qstring, struct file *file,
                        tmp_dentry->d_op = &cifs_dentry_ops;
                if(*ptmp_inode == NULL)
                        return rc;
-               rc = 1;
-               d_instantiate(tmp_dentry, *ptmp_inode);
-               d_rehash(tmp_dentry);
+               rc = 2;
        }
 
        tmp_dentry->d_time = jiffies;
@@ -870,6 +867,12 @@ static int cifs_filldir(char *pfindEntry, struct file *file,
                                pfindEntry, &obj_type, rc);
        else
                fill_in_inode(tmp_inode, 1 /* NT */, pfindEntry, &obj_type, rc);
+
+       if(rc) /* new inode - needs to be tied to dentry */ {
+               d_instantiate(tmp_dentry, tmp_inode);
+               if(rc == 2)
+                       d_rehash(tmp_dentry);
+       }
        
        
        rc = filldir(direntry,qstring.name,qstring.len,file->f_pos,
index c5ee9f0..0f0b1ea 100644 (file)
@@ -1009,11 +1009,14 @@ struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode,
        buffer_trace_init(&dummy.b_history);
        err = ext3_get_blocks_handle(handle, inode, block, 1,
                                        &dummy, create, 1);
-       if (err == 1) {
+       /*
+        * ext3_get_blocks_handle() returns number of blocks
+        * mapped. 0 in case of a HOLE.
+        */
+       if (err > 0) {
+               if (err > 1)
+                       WARN_ON(1);
                err = 0;
-       } else if (err >= 0) {
-               WARN_ON(1);
-               err = -EIO;
        }
        *errp = err;
        if (!err && buffer_mapped(&dummy)) {
index de2e4cb..f5169a9 100644 (file)
@@ -727,7 +727,7 @@ done:
 
 out:
        if (unlikely(frozen_buffer))    /* It's usually NULL */
-               kfree(frozen_buffer);
+               jbd_slab_free(frozen_buffer, bh->b_size);
 
        JBUFFER_TRACE(jh, "exit");
        return error;
index fecd3b0..76ca1cb 100644 (file)
@@ -100,25 +100,6 @@ static inline int put_dreq(struct nfs_direct_req *dreq)
        return atomic_dec_and_test(&dreq->io_count);
 }
 
-/*
- * "size" is never larger than rsize or wsize.
- */
-static inline int nfs_direct_count_pages(unsigned long user_addr, size_t size)
-{
-       int page_count;
-
-       page_count = (user_addr + size + PAGE_SIZE - 1) >> PAGE_SHIFT;
-       page_count -= user_addr >> PAGE_SHIFT;
-       BUG_ON(page_count < 0);
-
-       return page_count;
-}
-
-static inline unsigned int nfs_max_pages(unsigned int size)
-{
-       return (size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-}
-
 /**
  * nfs_direct_IO - NFS address space operation for direct I/O
  * @rw: direction (read or write)
@@ -276,28 +257,24 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo
        struct nfs_open_context *ctx = dreq->ctx;
        struct inode *inode = ctx->dentry->d_inode;
        size_t rsize = NFS_SERVER(inode)->rsize;
-       unsigned int rpages = nfs_max_pages(rsize);
        unsigned int pgbase;
        int result;
        ssize_t started = 0;
 
        get_dreq(dreq);
 
-       pgbase = user_addr & ~PAGE_MASK;
        do {
                struct nfs_read_data *data;
                size_t bytes;
 
+               pgbase = user_addr & ~PAGE_MASK;
+               bytes = min(rsize,count);
+
                result = -ENOMEM;
-               data = nfs_readdata_alloc(rpages);
+               data = nfs_readdata_alloc(pgbase + bytes);
                if (unlikely(!data))
                        break;
 
-               bytes = rsize;
-               if (count < rsize)
-                       bytes = count;
-
-               data->npages = nfs_direct_count_pages(user_addr, bytes);
                down_read(&current->mm->mmap_sem);
                result = get_user_pages(current, current->mm, user_addr,
                                        data->npages, 1, 0, data->pagevec, NULL);
@@ -344,8 +321,10 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo
                started += bytes;
                user_addr += bytes;
                pos += bytes;
+               /* FIXME: Remove this unnecessary math from final patch */
                pgbase += bytes;
                pgbase &= ~PAGE_MASK;
+               BUG_ON(pgbase != (user_addr & ~PAGE_MASK));
 
                count -= bytes;
        } while (count != 0);
@@ -524,7 +503,7 @@ static void nfs_direct_write_complete(struct nfs_direct_req *dreq, struct inode
 
 static void nfs_alloc_commit_data(struct nfs_direct_req *dreq)
 {
-       dreq->commit_data = nfs_commit_alloc(0);
+       dreq->commit_data = nfs_commit_alloc();
        if (dreq->commit_data != NULL)
                dreq->commit_data->req = (struct nfs_page *) dreq;
 }
@@ -605,28 +584,24 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l
        struct nfs_open_context *ctx = dreq->ctx;
        struct inode *inode = ctx->dentry->d_inode;
        size_t wsize = NFS_SERVER(inode)->wsize;
-       unsigned int wpages = nfs_max_pages(wsize);
        unsigned int pgbase;
        int result;
        ssize_t started = 0;
 
        get_dreq(dreq);
 
-       pgbase = user_addr & ~PAGE_MASK;
        do {
                struct nfs_write_data *data;
                size_t bytes;
 
+               pgbase = user_addr & ~PAGE_MASK;
+               bytes = min(wsize,count);
+
                result = -ENOMEM;
-               data = nfs_writedata_alloc(wpages);
+               data = nfs_writedata_alloc(pgbase + bytes);
                if (unlikely(!data))
                        break;
 
-               bytes = wsize;
-               if (count < wsize)
-                       bytes = count;
-
-               data->npages = nfs_direct_count_pages(user_addr, bytes);
                down_read(&current->mm->mmap_sem);
                result = get_user_pages(current, current->mm, user_addr,
                                        data->npages, 0, 0, data->pagevec, NULL);
@@ -676,8 +651,11 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l
                started += bytes;
                user_addr += bytes;
                pos += bytes;
+
+               /* FIXME: Remove this useless math from the final patch */
                pgbase += bytes;
                pgbase &= ~PAGE_MASK;
+               BUG_ON(pgbase != (user_addr & ~PAGE_MASK));
 
                count -= bytes;
        } while (count != 0);
index da9cf11..7a9ee00 100644 (file)
@@ -43,13 +43,15 @@ static mempool_t *nfs_rdata_mempool;
 
 #define MIN_POOL_READ  (32)
 
-struct nfs_read_data *nfs_readdata_alloc(unsigned int pagecount)
+struct nfs_read_data *nfs_readdata_alloc(size_t len)
 {
+       unsigned int pagecount = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
        struct nfs_read_data *p = mempool_alloc(nfs_rdata_mempool, SLAB_NOFS);
 
        if (p) {
                memset(p, 0, sizeof(*p));
                INIT_LIST_HEAD(&p->pages);
+               p->npages = pagecount;
                if (pagecount <= ARRAY_SIZE(p->page_array))
                        p->pagevec = p->page_array;
                else {
@@ -140,7 +142,7 @@ static int nfs_readpage_sync(struct nfs_open_context *ctx, struct inode *inode,
        int             result;
        struct nfs_read_data *rdata;
 
-       rdata = nfs_readdata_alloc(1);
+       rdata = nfs_readdata_alloc(count);
        if (!rdata)
                return -ENOMEM;
 
@@ -336,25 +338,25 @@ static int nfs_pagein_multi(struct list_head *head, struct inode *inode)
        struct nfs_page *req = nfs_list_entry(head->next);
        struct page *page = req->wb_page;
        struct nfs_read_data *data;
-       unsigned int rsize = NFS_SERVER(inode)->rsize;
-       unsigned int nbytes, offset;
+       size_t rsize = NFS_SERVER(inode)->rsize, nbytes;
+       unsigned int offset;
        int requests = 0;
        LIST_HEAD(list);
 
        nfs_list_remove_request(req);
 
        nbytes = req->wb_bytes;
-       for(;;) {
-               data = nfs_readdata_alloc(1);
+       do {
+               size_t len = min(nbytes,rsize);
+
+               data = nfs_readdata_alloc(len);
                if (!data)
                        goto out_bad;
                INIT_LIST_HEAD(&data->pages);
                list_add(&data->pages, &list);
                requests++;
-               if (nbytes <= rsize)
-                       break;
-               nbytes -= rsize;
-       }
+               nbytes -= len;
+       } while(nbytes != 0);
        atomic_set(&req->wb_complete, requests);
 
        ClearPageError(page);
@@ -402,7 +404,7 @@ static int nfs_pagein_one(struct list_head *head, struct inode *inode)
        if (NFS_SERVER(inode)->rsize < PAGE_CACHE_SIZE)
                return nfs_pagein_multi(head, inode);
 
-       data = nfs_readdata_alloc(NFS_SERVER(inode)->rpages);
+       data = nfs_readdata_alloc(NFS_SERVER(inode)->rsize);
        if (!data)
                goto out_bad;
 
index 5077499..8ab3cf1 100644 (file)
@@ -90,22 +90,13 @@ static mempool_t *nfs_commit_mempool;
 
 static DECLARE_WAIT_QUEUE_HEAD(nfs_write_congestion);
 
-struct nfs_write_data *nfs_commit_alloc(unsigned int pagecount)
+struct nfs_write_data *nfs_commit_alloc(void)
 {
        struct nfs_write_data *p = mempool_alloc(nfs_commit_mempool, SLAB_NOFS);
 
        if (p) {
                memset(p, 0, sizeof(*p));
                INIT_LIST_HEAD(&p->pages);
-               if (pagecount <= ARRAY_SIZE(p->page_array))
-                       p->pagevec = p->page_array;
-               else {
-                       p->pagevec = kcalloc(pagecount, sizeof(struct page *), GFP_NOFS);
-                       if (!p->pagevec) {
-                               mempool_free(p, nfs_commit_mempool);
-                               p = NULL;
-                       }
-               }
        }
        return p;
 }
@@ -117,13 +108,15 @@ void nfs_commit_free(struct nfs_write_data *p)
        mempool_free(p, nfs_commit_mempool);
 }
 
-struct nfs_write_data *nfs_writedata_alloc(unsigned int pagecount)
+struct nfs_write_data *nfs_writedata_alloc(size_t len)
 {
+       unsigned int pagecount = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
        struct nfs_write_data *p = mempool_alloc(nfs_wdata_mempool, SLAB_NOFS);
 
        if (p) {
                memset(p, 0, sizeof(*p));
                INIT_LIST_HEAD(&p->pages);
+               p->npages = pagecount;
                if (pagecount <= ARRAY_SIZE(p->page_array))
                        p->pagevec = p->page_array;
                else {
@@ -208,7 +201,7 @@ static int nfs_writepage_sync(struct nfs_open_context *ctx, struct inode *inode,
        int             result, written = 0;
        struct nfs_write_data *wdata;
 
-       wdata = nfs_writedata_alloc(1);
+       wdata = nfs_writedata_alloc(wsize);
        if (!wdata)
                return -ENOMEM;
 
@@ -999,24 +992,24 @@ static int nfs_flush_multi(struct inode *inode, struct list_head *head, int how)
        struct nfs_page *req = nfs_list_entry(head->next);
        struct page *page = req->wb_page;
        struct nfs_write_data *data;
-       unsigned int wsize = NFS_SERVER(inode)->wsize;
-       unsigned int nbytes, offset;
+       size_t wsize = NFS_SERVER(inode)->wsize, nbytes;
+       unsigned int offset;
        int requests = 0;
        LIST_HEAD(list);
 
        nfs_list_remove_request(req);
 
        nbytes = req->wb_bytes;
-       for (;;) {
-               data = nfs_writedata_alloc(1);
+       do {
+               size_t len = min(nbytes, wsize);
+
+               data = nfs_writedata_alloc(len);
                if (!data)
                        goto out_bad;
                list_add(&data->pages, &list);
                requests++;
-               if (nbytes <= wsize)
-                       break;
-               nbytes -= wsize;
-       }
+               nbytes -= len;
+       } while (nbytes != 0);
        atomic_set(&req->wb_complete, requests);
 
        ClearPageError(page);
@@ -1070,7 +1063,7 @@ static int nfs_flush_one(struct inode *inode, struct list_head *head, int how)
        struct nfs_write_data   *data;
        unsigned int            count;
 
-       data = nfs_writedata_alloc(NFS_SERVER(inode)->wpages);
+       data = nfs_writedata_alloc(NFS_SERVER(inode)->wsize);
        if (!data)
                goto out_bad;
 
@@ -1378,7 +1371,7 @@ nfs_commit_list(struct inode *inode, struct list_head *head, int how)
        struct nfs_write_data   *data;
        struct nfs_page         *req;
 
-       data = nfs_commit_alloc(NFS_SERVER(inode)->wpages);
+       data = nfs_commit_alloc();
 
        if (!data)
                goto out_bad;
index 6d4e817..5c4c94d 100644 (file)
@@ -49,6 +49,7 @@ DEFINE_SPINLOCK(sb_lock);
 
 /**
  *     alloc_super     -       create new superblock
+ *     @type:  filesystem type superblock should belong to
  *
  *     Allocates and initializes a new &struct super_block.  alloc_super()
  *     returns a pointer new superblock or %NULL if allocation had failed.
index c40f81b..34dcb43 100644 (file)
@@ -1390,11 +1390,19 @@ xfs_vm_direct_IO(
 
        iocb->private = xfs_alloc_ioend(inode, IOMAP_UNWRITTEN);
 
-       ret = blockdev_direct_IO_own_locking(rw, iocb, inode,
-               iomap.iomap_target->bt_bdev,
-               iov, offset, nr_segs,
-               xfs_get_blocks_direct,
-               xfs_end_io_direct);
+       if (rw == WRITE) {
+               ret = blockdev_direct_IO_own_locking(rw, iocb, inode,
+                       iomap.iomap_target->bt_bdev,
+                       iov, offset, nr_segs,
+                       xfs_get_blocks_direct,
+                       xfs_end_io_direct);
+       } else {
+               ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
+                       iomap.iomap_target->bt_bdev,
+                       iov, offset, nr_segs,
+                       xfs_get_blocks_direct,
+                       xfs_end_io_direct);
+       }
 
        if (unlikely(ret <= 0 && iocb->private))
                xfs_destroy_ioend(iocb->private);
index 5d9cfd9..ee788b1 100644 (file)
@@ -264,7 +264,9 @@ xfs_read(
                                        dmflags, &locktype);
                if (ret) {
                        xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-                       goto unlock_mutex;
+                       if (unlikely(ioflags & IO_ISDIRECT))
+                               mutex_unlock(&inode->i_mutex);
+                       return ret;
                }
        }
 
@@ -272,6 +274,9 @@ xfs_read(
                bhv_vop_flushinval_pages(vp, ctooff(offtoct(*offset)),
                                                -1, FI_REMAPF_LOCKED);
 
+       if (unlikely(ioflags & IO_ISDIRECT))
+               mutex_unlock(&inode->i_mutex);
+
        xfs_rw_enter_trace(XFS_READ_ENTER, &ip->i_iocore,
                                (void *)iovp, segs, *offset, ioflags);
        ret = __generic_file_aio_read(iocb, iovp, segs, offset);
@@ -281,10 +286,6 @@ xfs_read(
                XFS_STATS_ADD(xs_read_bytes, ret);
 
        xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-
-unlock_mutex:
-       if (unlikely(ioflags & IO_ISDIRECT))
-               mutex_unlock(&inode->i_mutex);
        return ret;
 }
 
@@ -390,6 +391,8 @@ xfs_splice_write(
        xfs_inode_t             *ip = XFS_BHVTOI(bdp);
        xfs_mount_t             *mp = ip->i_mount;
        ssize_t                 ret;
+       struct inode            *inode = outfilp->f_mapping->host;
+       xfs_fsize_t             isize;
 
        XFS_STATS_INC(xs_write_calls);
        if (XFS_FORCED_SHUTDOWN(ip->i_mount))
@@ -416,6 +419,20 @@ xfs_splice_write(
        if (ret > 0)
                XFS_STATS_ADD(xs_write_bytes, ret);
 
+       isize = i_size_read(inode);
+       if (unlikely(ret < 0 && ret != -EFAULT && *ppos > isize))
+               *ppos = isize;
+
+       if (*ppos > ip->i_d.di_size) {
+               xfs_ilock(ip, XFS_ILOCK_EXCL);
+               if (*ppos > ip->i_d.di_size) {
+                       ip->i_d.di_size = *ppos;
+                       i_size_write(inode, *ppos);
+                       ip->i_update_core = 1;
+                       ip->i_update_size = 1;
+               }
+               xfs_iunlock(ip, XFS_ILOCK_EXCL);
+       }
        xfs_iunlock(ip, XFS_IOLOCK_EXCL);
        return ret;
 }
index f137856..db8872b 100644 (file)
@@ -203,7 +203,7 @@ xfs_qm_statvfs(
        if (error || !vnode)
                return error;
 
-       mp = XFS_BHVTOM(bhv);
+       mp = xfs_vfstom(bhvtovfs(bhv));
        ip = xfs_vtoi(vnode);
 
        if (!(ip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT))
index 650591f..5a42561 100644 (file)
@@ -43,6 +43,26 @@ typedef enum xfs_alloctype
 #define        XFS_ALLOC_FLAG_TRYLOCK  0x00000001  /* use trylock for buffer locking */
 #define        XFS_ALLOC_FLAG_FREEING  0x00000002  /* indicate caller is freeing extents*/
 
+/*
+ * In order to avoid ENOSPC-related deadlock caused by
+ * out-of-order locking of AGF buffer (PV 947395), we place
+ * constraints on the relationship among actual allocations for
+ * data blocks, freelist blocks, and potential file data bmap
+ * btree blocks. However, these restrictions may result in no
+ * actual space allocated for a delayed extent, for example, a data
+ * block in a certain AG is allocated but there is no additional
+ * block for the additional bmap btree block due to a split of the
+ * bmap btree of the file. The result of this may lead to an
+ * infinite loop in xfssyncd when the file gets flushed to disk and
+ * all delayed extents need to be actually allocated. To get around
+ * this, we explicitly set aside a few blocks which will not be
+ * reserved in delayed allocation. Considering the minimum number of
+ * needed freelist blocks is 4 fsbs _per AG_, a potential split of file's bmap
+ * btree requires 1 fsb, so we set the number of set-aside blocks
+ * to 4 + 4*agcount.
+ */
+#define XFS_ALLOC_SET_ASIDE(mp)  (4 + ((mp)->m_sb.sb_agcount * 4))
+
 /*
  * Argument structure for xfs_alloc routines.
  * This is turned into a structure to avoid having 20 arguments passed
index 077629b..c064e72 100644 (file)
@@ -462,7 +462,7 @@ xfs_fs_counts(
 
        xfs_icsb_sync_counters_lazy(mp);
        s = XFS_SB_LOCK(mp);
-       cnt->freedata = mp->m_sb.sb_fdblocks;
+       cnt->freedata = mp->m_sb.sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
        cnt->freertx = mp->m_sb.sb_frextents;
        cnt->freeino = mp->m_sb.sb_ifree;
        cnt->allocino = mp->m_sb.sb_icount;
@@ -519,15 +519,19 @@ xfs_reserve_blocks(
                }
                mp->m_resblks = request;
        } else {
+               __int64_t       free;
+
+               free =  mp->m_sb.sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
                delta = request - mp->m_resblks;
-               lcounter = mp->m_sb.sb_fdblocks - delta;
+               lcounter = free - delta;
                if (lcounter < 0) {
                        /* We can't satisfy the request, just get what we can */
-                       mp->m_resblks += mp->m_sb.sb_fdblocks;
-                       mp->m_resblks_avail += mp->m_sb.sb_fdblocks;
-                       mp->m_sb.sb_fdblocks = 0;
+                       mp->m_resblks += free;
+                       mp->m_resblks_avail += free;
+                       mp->m_sb.sb_fdblocks = XFS_ALLOC_SET_ASIDE(mp);
                } else {
-                       mp->m_sb.sb_fdblocks = lcounter;
+                       mp->m_sb.sb_fdblocks =
+                               lcounter + XFS_ALLOC_SET_ASIDE(mp);
                        mp->m_resblks = request;
                        mp->m_resblks_avail += delta;
                }
index 4be5c0b..9dfae18 100644 (file)
@@ -1243,24 +1243,6 @@ xfs_mod_sb(xfs_trans_t *tp, __int64_t fields)
        xfs_trans_log_buf(tp, bp, first, last);
 }
 
-/*
- * In order to avoid ENOSPC-related deadlock caused by
- * out-of-order locking of AGF buffer (PV 947395), we place
- * constraints on the relationship among actual allocations for
- * data blocks, freelist blocks, and potential file data bmap
- * btree blocks. However, these restrictions may result in no
- * actual space allocated for a delayed extent, for example, a data
- * block in a certain AG is allocated but there is no additional
- * block for the additional bmap btree block due to a split of the
- * bmap btree of the file. The result of this may lead to an
- * infinite loop in xfssyncd when the file gets flushed to disk and
- * all delayed extents need to be actually allocated. To get around
- * this, we explicitly set aside a few blocks which will not be
- * reserved in delayed allocation. Considering the minimum number of
- * needed freelist blocks is 4 fsbs, a potential split of file's bmap
- * btree requires 1 fsb, so we set the number of set-aside blocks to 8.
-*/
-#define SET_ASIDE_BLOCKS 8
 
 /*
  * xfs_mod_incore_sb_unlocked() is a utility routine common used to apply
@@ -1306,7 +1288,8 @@ xfs_mod_incore_sb_unlocked(xfs_mount_t *mp, xfs_sb_field_t field,
                return 0;
        case XFS_SBS_FDBLOCKS:
 
-               lcounter = (long long)mp->m_sb.sb_fdblocks - SET_ASIDE_BLOCKS;
+               lcounter = (long long)
+                       mp->m_sb.sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
                res_used = (long long)(mp->m_resblks - mp->m_resblks_avail);
 
                if (delta > 0) {                /* Putting blocks back */
@@ -1340,7 +1323,7 @@ xfs_mod_incore_sb_unlocked(xfs_mount_t *mp, xfs_sb_field_t field,
                        }
                }
 
-               mp->m_sb.sb_fdblocks = lcounter + SET_ASIDE_BLOCKS;
+               mp->m_sb.sb_fdblocks = lcounter + XFS_ALLOC_SET_ASIDE(mp);
                return 0;
        case XFS_SBS_FREXTENTS:
                lcounter = (long long)mp->m_sb.sb_frextents;
@@ -2021,7 +2004,8 @@ xfs_icsb_sync_counters_lazy(
  * when we get near ENOSPC.
  */
 #define XFS_ICSB_INO_CNTR_REENABLE     64
-#define XFS_ICSB_FDBLK_CNTR_REENABLE   512
+#define XFS_ICSB_FDBLK_CNTR_REENABLE(mp) \
+               (512 + XFS_ALLOC_SET_ASIDE(mp))
 STATIC void
 xfs_icsb_balance_counter(
        xfs_mount_t     *mp,
@@ -2055,7 +2039,7 @@ xfs_icsb_balance_counter(
        case XFS_SBS_FDBLOCKS:
                count = mp->m_sb.sb_fdblocks;
                resid = do_div(count, weight);
-               if (count < XFS_ICSB_FDBLK_CNTR_REENABLE)
+               if (count < XFS_ICSB_FDBLK_CNTR_REENABLE(mp))
                        goto out;
                break;
        default:
@@ -2110,11 +2094,11 @@ again:
        case XFS_SBS_FDBLOCKS:
                BUG_ON((mp->m_resblks - mp->m_resblks_avail) != 0);
 
-               lcounter = icsbp->icsb_fdblocks;
+               lcounter = icsbp->icsb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
                lcounter += delta;
                if (unlikely(lcounter < 0))
                        goto slow_path;
-               icsbp->icsb_fdblocks = lcounter;
+               icsbp->icsb_fdblocks = lcounter + XFS_ALLOC_SET_ASIDE(mp);
                break;
        default:
                BUG();
index b427d22..a34796e 100644 (file)
@@ -811,7 +811,8 @@ xfs_statvfs(
        statp->f_bsize = sbp->sb_blocksize;
        lsize = sbp->sb_logstart ? sbp->sb_logblocks : 0;
        statp->f_blocks = sbp->sb_dblocks - lsize;
-       statp->f_bfree = statp->f_bavail = sbp->sb_fdblocks;
+       statp->f_bfree = statp->f_bavail =
+                               sbp->sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
        fakeinos = statp->f_bfree << sbp->sb_inopblog;
 #if XFS_BIG_INUMS
        fakeinos += mp->m_inoadd;
index 5675b17..40e8e27 100644 (file)
@@ -9,9 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *
 */
 
 #ifndef __ASM_ARCH_ANUBISCPLD_H
index 82f15db..4b5f423 100644 (file)
@@ -9,9 +9,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- */
+*/
 
 #ifndef __ASM_ARCH_ANUBISIRQ_H
 #define __ASM_ARCH_ANUBISIRQ_H
index d529ffd..058a210 100644 (file)
@@ -9,8 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
 */
 
 /* needs arch/map.h including with this */
index 0d276e6..7e02222 100644 (file)
@@ -9,10 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *     20-Nov-2004 BJD  Created file
- *     07-Mar-2005 BJD  Added suspend/resume calls
 */
 
 #ifndef __ASM_ARCH_AUDIO_H
index e28ca51..8969cff 100644 (file)
@@ -8,11 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  25-May-2003 BJD  Created file, added CTRL1 registers
- *  30-Aug-2004 BJD  Updated definitions from 2.4.26 port
- *  30-Aug-2004 BJD  Added CTRL3 and CTRL4 definitions
 */
 
 #ifndef __ASM_ARCH_BASTCPLD_H
index b79b47f..15ffa66 100644 (file)
@@ -8,11 +8,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  14-Sep-2004 BJD  Fixed IRQ_USBOC definition
- *  06-Jan-2003 BJD  Linux 2.6.0 version
- */
+*/
 
 #ifndef __ASM_ARCH_BASTIRQ_H
 #define __ASM_ARCH_BASTIRQ_H
index 29c07e3..727cef8 100644 (file)
@@ -8,10 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  06-Jan-2003 BJD  Linux 2.6.0 version, moved bast specifics from arch/map.h
- *  12-Mar-2004 BJD  Fixed header include protection
 */
 
 /* needs arch/map.h including with this */
index 758c5c5..8283602 100644 (file)
@@ -9,9 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *     08-Oct-2003     BJD     Initial creation
 */
 
 #ifndef __ASM_ARCH_BASTPMU_H
index b7d15d1..9306486 100644 (file)
@@ -10,9 +10,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
 */
 
 #include <asm/arch/map.h>
index 7463fd5..3661e46 100644 (file)
@@ -1,18 +1,13 @@
-/* linux/include/asm-arm/arch-bast/dma.h
+/* linux/include/asm-arm/arch-s3c2410/dma.h
  *
- * Copyright (C) 2003,2004 Simtec Electronics
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
  *     Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2410X DMA support
+ * Samsung S3C241XX DMA support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  ??-May-2003 BJD   Created file
- *  ??-Jun-2003 BJD   Added more dma functionality to go with arch
- *  10-Nov-2004 BJD   Added sys_device support
 */
 
 #ifndef __ASM_ARCH_DMA_H
 #include <linux/sysdev.h>
 #include "hardware.h"
 
-
 /*
  * This is the maximum DMA address(physical address) that can be DMAd to.
  *
  */
-#define MAX_DMA_ADDRESS                0x20000000
+#define MAX_DMA_ADDRESS                0x40000000
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
-
 /* we have 4 dma channels */
 #define S3C2410_DMA_CHANNELS        (4)
 
 /* types */
 
-typedef enum {
+enum s3c2410_dma_state {
        S3C2410_DMA_IDLE,
        S3C2410_DMA_RUNNING,
        S3C2410_DMA_PAUSED
-} s3c2410_dma_state_t;
+};
 
 
-/* s3c2410_dma_loadst_t
+/* enum s3c2410_dma_loadst
  *
  * This represents the state of the DMA engine, wrt to the loaded / running
  * transfers. Since we don't have any way of knowing exactly the state of
@@ -70,45 +63,40 @@ typedef enum {
  * currently running.
 */
 
-typedef enum {
+enum s3c2410_dma_loadst {
        S3C2410_DMALOAD_NONE,
        S3C2410_DMALOAD_1LOADED,
        S3C2410_DMALOAD_1RUNNING,
        S3C2410_DMALOAD_1LOADED_1RUNNING,
-} s3c2410_dma_loadst_t;
+};
 
-typedef enum {
+enum s3c2410_dma_buffresult {
        S3C2410_RES_OK,
        S3C2410_RES_ERR,
        S3C2410_RES_ABORT
-} s3c2410_dma_buffresult_t;
-
-
-typedef enum s3c2410_dmasrc_e s3c2410_dmasrc_t;
+};
 
-enum s3c2410_dmasrc_e {
-       S3C2410_DMASRC_HW,      /* source is memory */
-       S3C2410_DMASRC_MEM      /* source is hardware */
+enum s3c2410_dmasrc {
+       S3C2410_DMASRC_HW,              /* source is memory */
+       S3C2410_DMASRC_MEM              /* source is hardware */
 };
 
-/* enum s3c2410_chan_op_e
+/* enum s3c2410_chan_op
  *
  * operation codes passed to the DMA code by the user, and also used
  * to inform the current channel owner of any changes to the system state
 */
 
-enum s3c2410_chan_op_e {
+enum s3c2410_chan_op {
        S3C2410_DMAOP_START,
        S3C2410_DMAOP_STOP,
        S3C2410_DMAOP_PAUSE,
        S3C2410_DMAOP_RESUME,
        S3C2410_DMAOP_FLUSH,
-       S3C2410_DMAOP_TIMEOUT,           /* internal signal to handler */
+       S3C2410_DMAOP_TIMEOUT,          /* internal signal to handler */
        S3C2410_DMAOP_STARTED,          /* indicate channel started */
 };
 
-typedef enum s3c2410_chan_op_e s3c2410_chan_op_t;
-
 /* flags */
 
 #define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
@@ -117,104 +105,100 @@ typedef enum s3c2410_chan_op_e s3c2410_chan_op_t;
 
 /* dma buffer */
 
-typedef struct s3c2410_dma_buf_s s3c2410_dma_buf_t;
-
 struct s3c2410_dma_client {
        char                *name;
 };
 
-typedef struct s3c2410_dma_client s3c2410_dma_client_t;
-
 /* s3c2410_dma_buf_s
  *
  * internally used buffer structure to describe a queued or running
  * buffer.
 */
 
-struct s3c2410_dma_buf_s {
-       s3c2410_dma_buf_t   *next;
-       int                  magic;        /* magic */
-       int                  size;         /* buffer size in bytes */
-       dma_addr_t           data;         /* start of DMA data */
-       dma_addr_t           ptr;          /* where the DMA got to [1] */
-       void                *id;           /* client's id */
+struct s3c2410_dma_buf;
+struct s3c2410_dma_buf {
+       struct s3c2410_dma_buf  *next;
+       int                      magic;         /* magic */
+       int                      size;          /* buffer size in bytes */
+       dma_addr_t               data;          /* start of DMA data */
+       dma_addr_t               ptr;           /* where the DMA got to [1] */
+       void                    *id;            /* client's id */
 };
 
 /* [1] is this updated for both recv/send modes? */
 
-typedef struct s3c2410_dma_chan_s s3c2410_dma_chan_t;
+struct s3c2410_dma_chan;
 
 /* s3c2410_dma_cbfn_t
  *
  * buffer callback routine type
 */
 
-typedef void (*s3c2410_dma_cbfn_t)(s3c2410_dma_chan_t *, void *buf, int size,
-                                  s3c2410_dma_buffresult_t result);
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+                                  void *buf, int size,
+                                  enum s3c2410_dma_buffresult result);
 
-typedef int  (*s3c2410_dma_opfn_t)(s3c2410_dma_chan_t *,
-                                  s3c2410_chan_op_t );
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+                                  enum s3c2410_chan_op );
 
-struct s3c2410_dma_stats_s {
-       unsigned long          loads;
-       unsigned long          timeout_longest;
-       unsigned long          timeout_shortest;
-       unsigned long          timeout_avg;
-       unsigned long          timeout_failed;
+struct s3c2410_dma_stats {
+       unsigned long           loads;
+       unsigned long           timeout_longest;
+       unsigned long           timeout_shortest;
+       unsigned long           timeout_avg;
+       unsigned long           timeout_failed;
 };
 
-typedef struct s3c2410_dma_stats_s s3c2410_dma_stats_t;
-
-/* struct s3c2410_dma_chan_s
+/* struct s3c2410_dma_chan
  *
  * full state information for each DMA channel
 */
 
-struct s3c2410_dma_chan_s {
+struct s3c2410_dma_chan {
        /* channel state flags and information */
-       unsigned char          number;      /* number of this dma channel */
-       unsigned char          in_use;      /* channel allocated */
-       unsigned char          irq_claimed; /* irq claimed for channel */
-       unsigned char          irq_enabled; /* irq enabled for channel */
-       unsigned char          xfer_unit;   /* size of an transfer */
+       unsigned char            number;      /* number of this dma channel */
+       unsigned char            in_use;      /* channel allocated */
+       unsigned char            irq_claimed; /* irq claimed for channel */
+       unsigned char            irq_enabled; /* irq enabled for channel */
+       unsigned char            xfer_unit;   /* size of an transfer */
 
        /* channel state */
 
-       s3c2410_dma_state_t    state;
-       s3c2410_dma_loadst_t   load_state;
-       s3c2410_dma_client_t  *client;
+       enum s3c2410_dma_state   state;
+       enum s3c2410_dma_loadst  load_state;
+       struct s3c2410_dma_client *client;
 
        /* channel configuration */
-       s3c2410_dmasrc_t       source;
-       unsigned long          dev_addr;
-       unsigned long          load_timeout;
-       unsigned int           flags;        /* channel flags */
+       enum s3c2410_dmasrc      source;
+       unsigned long            dev_addr;
+       unsigned long            load_timeout;
+       unsigned int             flags;         /* channel flags */
 
        /* channel's hardware position and configuration */
-       void __iomem           *regs;        /* channels registers */
-       void __iomem           *addr_reg;    /* data address register */
-       unsigned int           irq;          /* channel irq */
-       unsigned long          dcon;         /* default value of DCON */
+       void __iomem            *regs;          /* channels registers */
+       void __iomem            *addr_reg;      /* data address register */
+       unsigned int             irq;           /* channel irq */
+       unsigned long            dcon;          /* default value of DCON */
 
        /* driver handles */
-       s3c2410_dma_cbfn_t     callback_fn;  /* buffer done callback */
-       s3c2410_dma_opfn_t     op_fn;        /* channel operation callback */
+       s3c2410_dma_cbfn_t       callback_fn;   /* buffer done callback */
+       s3c2410_dma_opfn_t       op_fn;         /* channel op callback */
 
        /* stats gathering */
-       s3c2410_dma_stats_t   *stats;
-       s3c2410_dma_stats_t    stats_store;
+       struct s3c2410_dma_stats *stats;
+       struct s3c2410_dma_stats  stats_store;
 
        /* buffer list and information */
-       s3c2410_dma_buf_t      *curr;        /* current dma buffer */
-       s3c2410_dma_buf_t      *next;        /* next buffer to load */
-       s3c2410_dma_buf_t      *end;         /* end of queue */
+       struct s3c2410_dma_buf  *curr;          /* current dma buffer */
+       struct s3c2410_dma_buf  *next;          /* next buffer to load */
+       struct s3c2410_dma_buf  *end;           /* end of queue */
 
        /* system device */
        struct sys_device       dev;
 };
 
 /* the currently allocated channel information */
-extern s3c2410_dma_chan_t s3c2410_chans[];
+extern struct s3c2410_dma_chan s3c2410_chans[];
 
 /* note, we don't really use dma_device_t at the moment */
 typedef unsigned long dma_device_t;
@@ -227,7 +211,7 @@ typedef unsigned long dma_device_t;
 */
 
 extern int s3c2410_dma_request(dmach_t channel,
-                              s3c2410_dma_client_t *, void *dev);
+                              struct s3c2410_dma_client *, void *dev);
 
 
 /* s3c2410_dma_ctrl
@@ -235,7 +219,7 @@ extern int s3c2410_dma_request(dmach_t channel,
  * change the state of the dma channel
 */
 
-extern int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op);
+extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
 
 /* s3c2410_dma_setflags
  *
@@ -250,7 +234,7 @@ extern int s3c2410_dma_setflags(dmach_t channel,
  * free the dma channel (will also abort any outstanding operations)
 */
 
-extern int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *);
+extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
 
 /* s3c2410_dma_enqueue
  *
@@ -274,7 +258,7 @@ extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
  * configure the device we're talking to
 */
 
-extern int s3c2410_dma_devconfig(int channel, s3c2410_dmasrc_t source,
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
                                 int hwcfg, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
index 4790491..7116179 100644 (file)
@@ -7,13 +7,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *     07-Sep-2004     RTP     Created file
- *     03-Nov-2004     BJD     Updated and minor cleanups
- *     03-Aug-2005     RTP     Renamed to fb.h
- *     26-Oct-2005     BJD     Changed name of platdata init
 */
 
 #ifndef __ASM_ARM_FB_H
index a2330bf..871f8af 100644 (file)
@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  21-May-2003 BJD  Created file
- *  06-Jun-2003 BJD  Added CPU frequency settings
- *  03-Sep-2003 BJD  Linux v2.6 support
- *  12-Mar-2004 BJD  Fixed include protection, fixed type of clock vars
- *  14-Sep-2004 BJD  Added misccr and getpin to gpio
- *  01-Oct-2004 BJD  Added the new gpio functions
- *  16-Oct-2004 BJD  Removed the clock variables
- *  15-Jan-2006 LCVR Added s3c2400_gpio_getirq()
 */
 
 #ifndef __ASM_ARCH_HARDWARE_H
index 749227c..eed4506 100644 (file)
@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 CPU Idle controls
- *
- *  Changelog:
- *     28-Oct-2004  BJD  Initial version
- *
 */
 
 #ifndef __ASM_ARCH_IDLE_H
index 518547f..ed3d6c7 100644 (file)
@@ -8,10 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *     05-Oct-2004 BJD  Created file
- *     19-Oct-2004 BJD  Updated for s3c2440
 */
 
 #ifndef __ASM_ARCH_IIC_H
index 16fbc8a..6b35a4f 100644 (file)
@@ -4,13 +4,7 @@
  *
  * Copyright (C) 1997 Russell King
  *          (C) 2003 Simtec Electronics
- *
- * Modifications:
- *  06-Dec-1997        RMK     Created.
- *  02-Sep-2003 BJD    Modified for S3C2410
- *  10-Mar-2005 LCVR   Changed S3C2410_VA to S3C24XX_VA
- *  13-Oct-2005 BJD    Fixed problems with LDRH/STRH offset range
- */
+*/
 
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
index d9773d6..39a6982 100644 (file)
@@ -6,14 +6,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  12-May-2003 BJD  Created file
- *  08-Jan-2003 BJD  Linux 2.6.0 version, moved BAST bits out
- *  12-Mar-2004 BJD  Fixed bug in header protection
- *  10-Feb-2005 BJD  Added camera IRQ from guillaume.gourat@nexvision.tv
- *  28-Feb-2005 BJD  Updated s3c2440 IRQs
- */
+*/
 
 
 #ifndef __ASM_ARCH_IRQS_H
index fae2766..27ba0ac 100644 (file)
@@ -8,13 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  12-May-2003 BJD   Created file
- *  06-Jan-2003 BJD   Linux 2.6.0 version, moved bast specifics out
- *  10-Feb-2005 BJD   Added CAMIF definition from guillaume.gourat@nexvision.tv
- *  10-Mar-2005 LCVR  Added support to S3C2400, changed {VA,SZ} names
- *  15-Jan-2006 LCVR  Added S3C24XX_PA macros for common S3C24XX resources
 */
 
 #ifndef __ASM_ARCH_MAP_H
index 6ab834a..4be6a74 100644 (file)
@@ -1,6 +1,4 @@
-/*
- *  linux/include/asm-arm/arch-s3c2410/memory.h
- *
+/* linux/include/asm-arm/arch-s3c2410/memory.h
  *  from linux/include/asm-arm/arch-rpc/memory.h
  *
  *  Copyright (C) 1996,1997,1998 Russell King.
@@ -8,16 +6,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK   Created
- *   31-Dec-1997 RMK   Fixed definitions to reduce warnings
- *   11-Jan-1998 RMK   Uninlined to reduce hits on cache
- *   08-Feb-1998 RMK   Added __virt_to_bus and __bus_to_virt
- *   21-Mar-1999 RMK   Renamed to memory.h
- *              RMK    Added TASK_SIZE and PAGE_OFFSET
- *   05-Apr-2004 BJD    Copied and altered for arch-s3c2410
- *   17-Mar-2005 LCVR   Modified for S3C2400
 */
 
 #ifndef __ASM_ARCH_MEMORY_H
index 9148ac0..e350ae2 100644 (file)
@@ -8,9 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *     23-Sep-2004 BJD  Created file
 */
 
 /* struct s3c2410_nand_set
index 7c4b0cd..e2d4062 100644 (file)
@@ -9,8 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
 */
 
 /* needs arch/map.h including with this */
index 15bfc2f..c7b90b3 100644 (file)
@@ -7,9 +7,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 ADC registers
- *
- *  Changelog:
- *    27-09-2004     SAH     Created file
 */
 
 #ifndef __ASM_ARCH_REGS_ADC_H
index a7c61fe..b2f4690 100644 (file)
@@ -8,18 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 clock register definitions
- *
- *  Changelog:
- *    18-Aug-2004 Ben Dooks         Added 2440 definitions
- *    08-Aug-2004 Herbert Pötzl     Added CLKCON definitions
- *    19-06-2003  Ben Dooks         Created file
- *    12-03-2004  Ben Dooks         Updated include protection
- *    29-Sep-2004 Ben Dooks        Fixed usage for assembly inclusion
- *    10-Feb-2005 Ben Dooks        Fixed CAMDIVN address (Guillaume Gourat)
- *    10-Mar-2005 Lucas Villa Real  Changed S3C2410_VA to S3C24XX_VA
- *    27-Aug-2005 Ben Dooks        Add clock-slow info
- *    20-Oct-2005 Ben Dooks        Fixed overflow in PLL (Guillaume Gourat)
- *    20-Oct-2005 Ben Dooks        Add masks for DCLK (Guillaume Gourat)
 */
 
 #ifndef __ASM_ARM_REGS_CLOCK
index 6dd17f0..93c4943 100644 (file)
@@ -8,21 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 GPIO register definitions
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    23-06-2003     BJD     Updated GSTATUS registers
- *    12-03-2004     BJD     Updated include protection
- *    20-07-2004     BJD     Added GPIO pin numbers, added Port A definitions
- *    04-10-2004     BJD     Fixed number of bugs, added EXT IRQ filter defs
- *    17-10-2004     BJD     Added GSTATUS1 register definitions
- *    18-11-2004     BJD     Fixed definitions of GPE3, GPE4, GPE5 and GPE6
- *    18-11-2004     BJD     Added S3C2440 AC97 controls
- *    10-Mar-2005    LCVR    Changed S3C2410_VA to S3C24XX_VA
- *    28-Mar-2005    LCVR    Fixed definition of GPB10
- *    26-Oct-2005    BJD     Added generic configuration types
- *    27-Nov-2005    LCVR    Added definitions to S3C2400 registers
- *    15-Jan-2006    LCVR    Written S3C24XX_GPIO_BASE() macro
 */
 
 
index 18edae5..91cefa2 100644 (file)
@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2440 GPIO J register definitions
- *
- *  Changelog:
- *    11-Aug-2004     BJD     Created file
- *    10-Feb-2005     BJD     Fix GPJ12 definition (Guillaume Gourat)
 */
 
 
index fed3288..2ae2952 100644 (file)
@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 I2C Controller
- *
- *  Changelog:
- *     03-Oct-2004  BJD  Initial include for Linux
- *     08-Nov-2004  BJD  Added S3C2440 filter register
 */
 
 #ifndef __ASM_ARCH_REGS_IIC_H
index 7fdde9b..72cd250 100644 (file)
@@ -8,17 +8,7 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 IIS register definition
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    26-06-2003     BJD     Finished off definitions for register addresses
- *    12-03-2004     BJD     Updated include protection
- *    07-03-2005     BJD     Added FIFO size flags and S3C2440 MPLL
- *    05-04-2005     LCVR    Added IISFCON definitions for the S3C2400
- *    18-07-2005     DA      Change IISCON_MPLL to IISMOD_MPLL
- *                           Correct IISMOD_256FS and IISMOD_384FS
- *                           Add IISCON_PSCEN
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_IIS_H
 #define __ASM_ARCH_REGS_IIS_H
index 572fca5..29fb8ef 100644 (file)
@@ -6,14 +6,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    12-03-2004     BJD     Updated include protection
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
- */
+*/
 
 
 #ifndef ___ASM_ARCH_REGS_IRQ_H
index b6b1b4e..b306d6e 100644 (file)
@@ -6,14 +6,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *
- *
- *  Changelog:
- *    12-06-2003     BJD     Created file
- *    26-06-2003     BJD     Updated LCDCON register definitions
- *    12-03-2004     BJD     Updated include protection
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
 */
 
 
index a2d7d0c..375dca5 100644 (file)
@@ -8,12 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Memory Control register definitions
- *
- *  Changelog:
- *     29-Sep-2004  BJD  Initial include for Linux
- *      10-Mar-2005  LCVR Changed S3C2410_VA to S3C24XX_VA
- *      04-Apr-2005  LCVR Added S3C2400 DRAM/BANKSIZE_MASK definitions
- *
 */
 
 #ifndef __ASM_ARM_MEMREGS_H
index c1470c6..b824d37 100644 (file)
@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 NAND register definitions
- *
- *  Changelog:
- *    18-Aug-2004    BJD     Copied file from 2.4 and updated
- *    01-May-2005    BJD     Added definitions for s3c2440 controller
 */
 
 #ifndef __ASM_ARM_REGS_NAND
index 0fbec07..cd88fd6 100644 (file)
@@ -8,11 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Internal RTC register definition
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    12-03-2004     BJD     Updated include protection
- *    15-01-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
 */
 
 #ifndef __ASM_ARCH_REGS_RTC_H
index ca9a26f..06e716e 100644 (file)
@@ -8,11 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 MMC/SDIO register definitions
- *
- *  Changelog:
- *    18-Aug-2004 Ben Dooks      Created initial file
- *    29-Nov-2004 Koen Martens   Added some missing defines, fixed duplicates
- *    29-Nov-2004 Ben Dooks     Updated Koen's patch
 */
 
 #ifndef __ASM_ARM_REGS_SDI
index 93f651a..19c77da 100644 (file)
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Modifications:
- *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
- */
+*/
 
 #ifndef __ASM_ARM_REGS_SERIAL_H
 #define __ASM_ARM_REGS_SERIAL_H
index 3382178..3552280 100644 (file)
@@ -7,13 +7,7 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 SPI register definition
- *
- *  Changelog:
- *    20-04-2004     KF      Created file
- *    04-10-2004     BJD     Removed VA address (no longer mapped)
- *                          tidied file for submission
- *    03-04-2005     LCVR    Added S3C2400_SPPIN_nCS definition
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_SPI_H
 #define __ASM_ARCH_REGS_SPI_H
index 169064e..731918e 100644 (file)
@@ -8,13 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Timer configuration
- *
- *  Changelog:
- *    05-06-2003     BJD     Created file
- *    26-06-2003     BJD     Added more timer definitions to mux / control
- *    12-03-2004     BJD     Updated include protection
- *    10-02-2005     BJD     Added S3C2410_TCFG1_MUX4_SHIFT (Guillaume Gourat)
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
 */
 
 
index bf315b7..3aa31a2 100644 (file)
@@ -6,13 +6,7 @@
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
- *
- *  Changelog:
- *    01-08-2004       Initial creation
- *    12-09-2004       Cleanup for submission
- *    24-10-2004       Fixed S3C2410_UDC_MAXP_REG definition
- *    10-03-2005       Changed S3C2410_VA to S3C24XX_VA
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_UDC_H
 #define __ASM_ARCH_REGS_UDC_H
index d199ca6..f4fff44 100644 (file)
@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs0watchdog.h
+/* linux/include/asm/arch-s3c2410/regs-watchdog.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *                   http://www.simtec.co.uk/products/SWLINUX/
@@ -8,11 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Watchdog timer control
- *
- *  Changelog:
- *    21-06-2003     BJD     Created file
- *    12-03-2004     BJD     Updated include protection
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
 */
 
 
index 9b0d850..718246d 100644 (file)
@@ -8,14 +8,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  12-May-2003 BJD  Created file
- *  14-May-2003 BJD  Removed idle to aid debugging
- *  12-Jun-2003 BJD  Added reset via watchdog
- *  04-Sep-2003 BJD  Moved to v2.6
- *  28-Oct-2004 BJD  Added over-ride for idle, and fixed reset panic()
- */
+*/
 
 #include <asm/hardware.h>
 #include <asm/io.h>
index 3558a3a..703c337 100644 (file)
@@ -8,12 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  02-Sep-2003 BJD  Created file
- *  05-Jan-2004 BJD  Updated for Linux 2.6.0
- *  22-Nov-2004 BJD  Fixed CLOCK_TICK_RATE
- *  10-Jan-2004 BJD  Removed s3c2410_clock_tick_rate
 */
 
 #ifndef __ASM_ARCH_TIMEX_H
index 8e152a0..81b3e91 100644 (file)
@@ -8,15 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  22-May-2003 BJD  Created
- *  08-Sep-2003 BJD  Moved to linux v2.6
- *  12-Mar-2004 BJD  Updated header protection
- *  12-Oct-2004 BJD  Take account of debug uart configuration
- *  15-Nov-2004 BJD  Fixed uart configuration
- *  22-Feb-2005 BJD  Added watchdog to uncompress
- *  04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1)
 */
 
 #ifndef __ASM_ARCH_UNCOMPRESS_H
index bd43b56..3572356 100644 (file)
@@ -8,11 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  11-Sep-2004 BJD  Created file
- *  21-Sep-2004 BJD  Updated port info
- *  09-Aug-2005 BJD  Renamed s3c2410_report_oc s3c2410_usb_report_oc
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
index 33963cd..0ae3bdb 100644 (file)
  * published by the Free Software Foundation.
  *
  * S3C2410 vmalloc definition
- *
- *  Changelog:
- *    12-Mar-2004 BJD  Fixed header, added include protection
- *    12=Mar-2004 BJD  Fixed VMALLOC_END definitions
- */
+*/
 
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
index 0ee373a..a341b1e 100644 (file)
@@ -8,10 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  25-May-2003 BJD  Created file, added CTRL1 registers
- *  19-Mar-2004 BJD  Added VR1000 CPLD definitions
 */
 
 #ifndef __ASM_ARCH_VR1000CPLD_H
index 694f771..c39a0ff 100644 (file)
@@ -8,11 +8,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  06-Jan-2003 BJD  Linux 2.6.0 version
- *  19-Mar-2004 BJD  Updates for VR1000
- */
+*/
 
 #ifndef __ASM_ARCH_VR1000IRQ_H
 #define __ASM_ARCH_VR1000IRQ_H
index 867c935..1fe4db3 100644 (file)
@@ -8,12 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  06-Jan-2003 BJD  Linux 2.6.0 version, split specifics from arch/map.h
- *  12-Mar-2004 BJD  Fixed header include protection
- *  19-Mar-2004 BJD  Copied to VR1000 machine headers.
- *  19-Jan-2005 BJD  Updated map definitions
 */
 
 /* needs arch/map.h including with this */
index fe0c744..e4a2569 100644 (file)
@@ -247,14 +247,12 @@ extern void dmac_flush_range(unsigned long, unsigned long);
  */
 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
        do {                                                    \
-               flush_cache_page(vma, vaddr, page_to_pfn(page));\
                memcpy(dst, src, len);                          \
-               flush_dcache_page(page);                        \
+               flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
        } while (0)
 
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
        do {                                                    \
-               flush_cache_page(vma, vaddr, page_to_pfn(page));\
                memcpy(dst, src, len);                          \
        } while (0)
 
@@ -285,10 +283,24 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l
                __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
        }
 }
+
+static inline void
+flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+                        unsigned long uaddr, void *kaddr,
+                        unsigned long len, int write)
+{
+       if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+               unsigned long addr = (unsigned long)kaddr;
+               __cpuc_coherent_kern_range(addr, addr + len);
+       }
+}
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+                               unsigned long uaddr, void *kaddr,
+                               unsigned long len, int write);
 #endif
 
 /*
index 406ca97..01b7c26 100644 (file)
@@ -199,7 +199,21 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw)
        : "cc");
 }
 
-#define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+       unsigned long tmp, tmp2 = 1;
+
+       __asm__ __volatile__(
+"1:    ldrex   %0, [%2]\n"
+"      adds    %0, %0, #1\n"
+"      strexpl %1, %0, [%2]\n"
+       : "=&r" (tmp), "+r" (tmp2)
+       : "r" (&rw->lock)
+       : "cc");
+
+       smp_mb();
+       return tmp2 == 0;
+}
 
 /* read_can_lock - would read_trylock() succeed? */
 #define __raw_read_can_lock(x)         ((x)->lock < 0x80000000)
index 6b16dda..c00de60 100644 (file)
@@ -2,7 +2,7 @@ unifdef-y += a.out.h auxvec.h byteorder.h errno.h fcntl.h ioctl.h       \
        ioctls.h ipcbuf.h mman.h msgbuf.h param.h poll.h                \
        posix_types.h ptrace.h resource.h sembuf.h shmbuf.h shmparam.h  \
        sigcontext.h siginfo.h signal.h socket.h sockios.h stat.h       \
-       statfs.h termbits.h termios.h timex.h types.h unistd.h user.h
+       statfs.h termbits.h termios.h types.h unistd.h user.h
 
 # These probably shouldn't be exported
 unifdef-y += elf.h page.h
diff --git a/include/asm-generic/audit_read.h b/include/asm-generic/audit_read.h
new file mode 100644 (file)
index 0000000..0e87464
--- /dev/null
@@ -0,0 +1,8 @@
+__NR_readlink,
+__NR_quotactl,
+__NR_listxattr,
+__NR_llistxattr,
+__NR_flistxattr,
+__NR_getxattr,
+__NR_lgetxattr,
+__NR_fgetxattr,
diff --git a/include/asm-generic/audit_write.h b/include/asm-generic/audit_write.h
new file mode 100644 (file)
index 0000000..f10d367
--- /dev/null
@@ -0,0 +1,11 @@
+#include <asm-generic/audit_dir_write.h>
+__NR_acct,
+__NR_swapon,
+__NR_quotactl,
+__NR_truncate,
+#ifdef __NR_truncate64
+__NR_truncate64,
+#endif
+#ifdef __NR_bind
+__NR_bind,             /* bind can affect fs object only in one way... */
+#endif
index c064a8e..2308190 100644 (file)
@@ -1,5 +1,5 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += boot.h cpufeature.h debugreg.h ldt.h setup.h ucontext.h
+header-y += boot.h debugreg.h ldt.h ucontext.h
 
-unifdef-y += mtrr.h vm86.h
+unifdef-y += mtrr.h setup.h vm86.h
index 1eac92c..db4344d 100644 (file)
@@ -7,10 +7,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/user.h>
-#include <asm/processor.h>
-#include <asm/system.h>                /* for savesegment */
 #include <asm/auxvec.h>
-#include <asm/desc.h>
 
 #include <linux/utsname.h>
 
@@ -48,6 +45,12 @@ typedef struct user_fxsr_struct elf_fpxregset_t;
 #define ELF_DATA       ELFDATA2LSB
 #define ELF_ARCH       EM_386
 
+#ifdef __KERNEL__
+
+#include <asm/processor.h>
+#include <asm/system.h>                /* for savesegment */
+#include <asm/desc.h>
+
 /* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program starts %edx
    contains a pointer to a function which might be registered using `atexit'.
    This provides a mean for the dynamic linker to call DT_FINI functions for
@@ -111,7 +114,6 @@ typedef struct user_fxsr_struct elf_fpxregset_t;
 
 #define ELF_PLATFORM  (system_utsname.machine)
 
-#ifdef __KERNEL__
 #define SET_PERSONALITY(ex, ibcs2) do { } while (0)
 
 /*
index 6b5dadc..51c9a97 100644 (file)
@@ -3,6 +3,10 @@
 
 #define MAX_IRQ_SOURCES 256
 
+#if CONFIG_BASE_SMALL == 0
+#define MAX_MP_BUSSES 256
+#else
 #define MAX_MP_BUSSES 32
+#endif
 
 #endif /* __ASM_MACH_MPSPEC_H */
index 3ac1ba9..87c069c 100644 (file)
 #define RW_LOCK_BIAS_STR       "0x01000000"
 
 #define __build_read_lock_ptr(rw, helper)   \
-       asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t" \
+       asm volatile(LOCK_PREFIX " subl $1,(%0)\n\t" \
                        "jns 1f\n" \
                        "call " helper "\n\t" \
                        "1:\n" \
-                       :"a" (rw) : "memory")
+                       ::"a" (rw) : "memory")
 
 #define __build_read_lock_const(rw, helper)   \
-       asm volatile(LOCK_PREFIX " subl $1,%0\n\t" \
+       asm volatile(LOCK_PREFIX " subl $1,%0\n\t" \
                        "jns 1f\n" \
                        "pushl %%eax\n\t" \
                        "leal %0,%%eax\n\t" \
                        "call " helper "\n\t" \
                        "popl %%eax\n\t" \
-                       "1:\n" \
-                       "+m" (*(volatile int *)rw) : : "memory")
+                       "1:\n" \
+                       :"+m" (*(volatile int *)rw) : : "memory")
 
 #define __build_read_lock(rw, helper)  do { \
                                                if (__builtin_constant_p(rw)) \
                                        } while (0)
 
 #define __build_write_lock_ptr(rw, helper) \
-       asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
+       asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",(%0)\n\t" \
                        "jz 1f\n" \
                        "call " helper "\n\t" \
-                       "1:\n", \
-                       "subl $" RW_LOCK_BIAS_STR ",(%0)\n\t", \
-                       :"a" (rw) : "memory")
+                       "1:\n" \
+                       ::"a" (rw) : "memory")
 
 #define __build_write_lock_const(rw, helper) \
-       asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
+       asm volatile(LOCK_PREFIX " subl $" RW_LOCK_BIAS_STR ",%0\n\t" \
                        "jz 1f\n" \
                        "pushl %%eax\n\t" \
                        "leal %0,%%eax\n\t" \
                        "call " helper "\n\t" \
                        "popl %%eax\n\t" \
-                       "1:\n", \
-                       "subl $" RW_LOCK_BIAS_STR ",%0\n\t", \
-                       "+m" (*(volatile int *)rw) : : "memory")
+                       "1:\n" \
+                       :"+m" (*(volatile int *)rw) : : "memory")
 
 #define __build_write_lock(rw, helper) do { \
                                                if (__builtin_constant_p(rw)) \
index f737e42..2734909 100644 (file)
@@ -6,6 +6,7 @@
 #ifndef _i386_SETUP_H
 #define _i386_SETUP_H
 
+#ifdef __KERNEL__
 #include <linux/pfn.h>
 
 /*
@@ -13,6 +14,7 @@
  */
 #define MAXMEM_PFN     PFN_DOWN(MAXMEM)
 #define MAX_NONPAE_PFN (1 << 20)
+#endif
 
 #define PARAM_SIZE 4096
 #define COMMAND_LINE_SIZE 256
index 3824a50..c3e8ade 100644 (file)
@@ -2,7 +2,6 @@
 #define _ASMi386_SIGNAL_H
 
 #include <linux/types.h>
-#include <linux/linkage.h>
 #include <linux/time.h>
 #include <linux/compiler.h>
 
@@ -10,6 +9,9 @@
 struct siginfo;
 
 #ifdef __KERNEL__
+
+#include <linux/linkage.h>
+
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
index 6ba179f..c73b878 100644 (file)
 #define MCL_CURRENT    1               /* lock all current mappings */
 #define MCL_FUTURE     2               /* lock all future mappings */
 
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check        ia64_mmap_check
+int ia64_mmap_check(unsigned long addr, unsigned long len,
+               unsigned long flags);
+#endif
+#endif
+
 #endif /* _ASM_IA64_MMAN_H */
index bb0eb72..f581662 100644 (file)
 /* 1294, 1295 reserved for pselect/ppoll */
 #define __NR_unshare                   1296
 #define __NR_splice                    1297
-#define __NR_set_robust_list           1298
-#define __NR_get_robust_list           1299
+/* 1298, 1299 reserved for set_robust_list/get_robust_list */
 #define __NR_sync_file_range           1300
 #define __NR_tee                       1301
 #define __NR_vmsplice                  1302
index 6ed1151..219d359 100644 (file)
@@ -14,8 +14,6 @@
 
 #include <spaces.h>
 
-#endif
-
 /*
  * PAGE_SHIFT determines the page size
  */
@@ -34,8 +32,6 @@
 #define PAGE_SIZE      (1UL << PAGE_SHIFT)
 #define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
 
-
-#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
 extern void clear_page(void * page);
@@ -168,8 +164,6 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 #define UNCAC_ADDR(addr)       ((addr) - PAGE_OFFSET + UNCAC_BASE)
 #define CAC_ADDR(addr)         ((addr) - UNCAC_BASE + PAGE_OFFSET)
 
-#endif /* defined (__KERNEL__) */
-
 #ifdef CONFIG_LIMITED_DMA
 #define WANT_PAGE_VIRTUAL
 #endif
@@ -177,4 +171,6 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 #include <asm-generic/memory_model.h>
 #include <asm-generic/page.h>
 
+#endif /* defined (__KERNEL__) */
+
 #endif /* _ASM_PAGE_H */
index 4df3e80..6a78439 100644 (file)
@@ -205,6 +205,7 @@ static inline void eeh_memset_io(volatile void __iomem *addr, int c,
        lc |= lc << 8;
        lc |= lc << 16;
 
+       __asm__ __volatile__ ("sync" : : : "memory");
        while(n && !EEH_CHECK_ALIGN(p, 4)) {
                *((volatile u8 *)p) = c;
                p++;
@@ -229,6 +230,7 @@ static inline void eeh_memcpy_fromio(void *dest, const volatile void __iomem *sr
        void *destsave = dest;
        unsigned long nsave = n;
 
+       __asm__ __volatile__ ("sync" : : : "memory");
        while(n && (!EEH_CHECK_ALIGN(vsrc, 4) || !EEH_CHECK_ALIGN(dest, 4))) {
                *((u8 *)dest) = *((volatile u8 *)vsrc);
                __asm__ __volatile__ ("eieio" : : : "memory");
@@ -266,6 +268,7 @@ static inline void eeh_memcpy_toio(volatile void __iomem *dest, const void *src,
 {
        void *vdest = (void __force *) dest;
 
+       __asm__ __volatile__ ("sync" : : : "memory");
        while(n && (!EEH_CHECK_ALIGN(vdest, 4) || !EEH_CHECK_ALIGN(src, 4))) {
                *((volatile u8 *)vdest) = *((u8 *)src);
                src++;
index f1b3c00..936422e 100644 (file)
@@ -84,7 +84,33 @@ static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
 static inline int
 futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 {
-       return -ENOSYS;
+       int prev;
+
+       if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+               return -EFAULT;
+
+        __asm__ __volatile__ (
+        LWSYNC_ON_SMP
+"1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
+        cmpw    0,%0,%3\n\
+        bne-    3f\n"
+        PPC405_ERR77(0,%2)
+"2:     stwcx.  %4,0,%2\n\
+        bne-    1b\n"
+        ISYNC_ON_SMP
+"3:    .section .fixup,\"ax\"\n\
+4:     li      %0,%5\n\
+       b       3b\n\
+       .previous\n\
+       .section __ex_table,\"a\"\n\
+       .align 3\n\
+       " PPC_LONG "1b,4b,2b,4b\n\
+       .previous" \
+        : "=&r" (prev), "+m" (*uaddr)
+        : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
+        : "cc", "memory");
+
+        return prev;
 }
 
 #endif /* __KERNEL__ */
index 36c4c34..212428d 100644 (file)
@@ -19,6 +19,7 @@ extern int check_legacy_ioport(unsigned long base_port);
 #include <linux/compiler.h>
 #include <asm/page.h>
 #include <asm/byteorder.h>
+#include <asm/paca.h>
 #ifdef CONFIG_PPC_ISERIES 
 #include <asm/iseries/iseries_io.h>
 #endif  
@@ -162,7 +163,11 @@ extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, int ns);
 extern void _insl_ns(volatile u32 __iomem *port, void *buf, int nl);
 extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl);
 
-#define mmiowb()
+static inline void mmiowb(void)
+{
+       __asm__ __volatile__ ("sync" : : : "memory");
+       get_paca()->io_sync = 0;
+}
 
 /*
  * output pause versions need a delay at least for the
@@ -278,22 +283,23 @@ static inline int in_8(const volatile unsigned char __iomem *addr)
 {
        int ret;
 
-       __asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
+       __asm__ __volatile__("sync; lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
                             : "=r" (ret) : "m" (*addr));
        return ret;
 }
 
 static inline void out_8(volatile unsigned char __iomem *addr, int val)
 {
-       __asm__ __volatile__("stb%U0%X0 %1,%0; sync"
+       __asm__ __volatile__("sync; stb%U0%X0 %1,%0"
                             : "=m" (*addr) : "r" (val));
+       get_paca()->io_sync = 1;
 }
 
 static inline int in_le16(const volatile unsigned short __iomem *addr)
 {
        int ret;
 
-       __asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync"
+       __asm__ __volatile__("sync; lhbrx %0,0,%1; twi 0,%0,0; isync"
                             : "=r" (ret) : "r" (addr), "m" (*addr));
        return ret;
 }
@@ -302,28 +308,30 @@ static inline int in_be16(const volatile unsigned short __iomem *addr)
 {
        int ret;
 
-       __asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync"
+       __asm__ __volatile__("sync; lhz%U1%X1 %0,%1; twi 0,%0,0; isync"
                             : "=r" (ret) : "m" (*addr));
        return ret;
 }
 
 static inline void out_le16(volatile unsigned short __iomem *addr, int val)
 {
-       __asm__ __volatile__("sthbrx %1,0,%2; sync"
+       __asm__ __volatile__("sync; sthbrx %1,0,%2"
                             : "=m" (*addr) : "r" (val), "r" (addr));
+       get_paca()->io_sync = 1;
 }
 
 static inline void out_be16(volatile unsigned short __iomem *addr, int val)
 {
-       __asm__ __volatile__("sth%U0%X0 %1,%0; sync"
+       __asm__ __volatile__("sync; sth%U0%X0 %1,%0"
                             : "=m" (*addr) : "r" (val));
+       get_paca()->io_sync = 1;
 }
 
 static inline unsigned in_le32(const volatile unsigned __iomem *addr)
 {
        unsigned ret;
 
-       __asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync"
+       __asm__ __volatile__("sync; lwbrx %0,0,%1; twi 0,%0,0; isync"
                             : "=r" (ret) : "r" (addr), "m" (*addr));
        return ret;
 }
@@ -332,21 +340,23 @@ static inline unsigned in_be32(const volatile unsigned __iomem *addr)
 {
        unsigned ret;
 
-       __asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
+       __asm__ __volatile__("sync; lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
                             : "=r" (ret) : "m" (*addr));
        return ret;
 }
 
 static inline void out_le32(volatile unsigned __iomem *addr, int val)
 {
-       __asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr)
+       __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr)
                             : "r" (val), "r" (addr));
+       get_paca()->io_sync = 1;
 }
 
 static inline void out_be32(volatile unsigned __iomem *addr, int val)
 {
-       __asm__ __volatile__("stw%U0%X0 %1,%0; sync"
+       __asm__ __volatile__("sync; stw%U0%X0 %1,%0"
                             : "=m" (*addr) : "r" (val));
+       get_paca()->io_sync = 1;
 }
 
 static inline unsigned long in_le64(const volatile unsigned long __iomem *addr)
@@ -354,6 +364,7 @@ static inline unsigned long in_le64(const volatile unsigned long __iomem *addr)
        unsigned long tmp, ret;
 
        __asm__ __volatile__(
+                            "sync\n"
                             "ld %1,0(%2)\n"
                             "twi 0,%1,0\n"
                             "isync\n"
@@ -372,7 +383,7 @@ static inline unsigned long in_be64(const volatile unsigned long __iomem *addr)
 {
        unsigned long ret;
 
-       __asm__ __volatile__("ld%U1%X1 %0,%1; twi 0,%0,0; isync"
+       __asm__ __volatile__("sync; ld%U1%X1 %0,%1; twi 0,%0,0; isync"
                             : "=r" (ret) : "m" (*addr));
        return ret;
 }
@@ -389,14 +400,16 @@ static inline void out_le64(volatile unsigned long __iomem *addr, unsigned long
                             "rldicl %1,%1,32,0\n"
                             "rlwimi %0,%1,8,8,31\n"
                             "rlwimi %0,%1,24,16,23\n"
-                            "std %0,0(%3)\n"
-                            "sync"
+                            "sync\n"
+                            "std %0,0(%3)"
                             : "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr));
+       get_paca()->io_sync = 1;
 }
 
 static inline void out_be64(volatile unsigned long __iomem *addr, unsigned long val)
 {
-       __asm__ __volatile__("std%U0%X0 %1,%0; sync" : "=m" (*addr) : "r" (val));
+       __asm__ __volatile__("sync; std%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
+       get_paca()->io_sync = 1;
 }
 
 #ifndef CONFIG_PPC_ISERIES 
index dc1574c..10e8eb1 100644 (file)
@@ -7,7 +7,7 @@
 /* How many bytes to reserve at zero for kdump. The reserve limit should
  * be greater or equal to the trampoline's end address.
  * Reserve to the end of the FWNMI area, see head_64.S */
-#define KDUMP_RESERVE_LIMIT    0x8000
+#define KDUMP_RESERVE_LIMIT    0x10000 /* 64K */
 
 #ifdef CONFIG_CRASH_DUMP
 
index 7ffa251..0a4e5c9 100644 (file)
@@ -94,6 +94,7 @@ struct paca_struct {
        u64 saved_r1;                   /* r1 save for RTAS calls */
        u64 saved_msr;                  /* MSR saved here by enter_rtas */
        u8 proc_enabled;                /* irq soft-enable flag */
+       u8 io_sync;                     /* writel() needs spin_unlock sync */
 
        /* Stuff for accurate time accounting */
        u64 user_time;                  /* accumulated usermode TB ticks */
index 895cb6d..c31e438 100644 (file)
 #define LOCK_TOKEN     1
 #endif
 
+#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
+#define CLEAR_IO_SYNC  (get_paca()->io_sync = 0)
+#define SYNC_IO                do {                                            \
+                               if (unlikely(get_paca()->io_sync)) {    \
+                                       mb();                           \
+                                       get_paca()->io_sync = 0;        \
+                               }                                       \
+                       } while (0)
+#else
+#define CLEAR_IO_SYNC
+#define SYNC_IO
+#endif
+
 /*
  * This returns the old value in the lock, so we succeeded
  * in getting the lock if the return value is 0.
@@ -61,6 +74,7 @@ static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock)
 
 static int __inline__ __raw_spin_trylock(raw_spinlock_t *lock)
 {
+       CLEAR_IO_SYNC;
        return __spin_trylock(lock) == 0;
 }
 
@@ -91,6 +105,7 @@ extern void __rw_yield(raw_rwlock_t *lock);
 
 static void __inline__ __raw_spin_lock(raw_spinlock_t *lock)
 {
+       CLEAR_IO_SYNC;
        while (1) {
                if (likely(__spin_trylock(lock) == 0))
                        break;
@@ -107,6 +122,7 @@ static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long
 {
        unsigned long flags_dis;
 
+       CLEAR_IO_SYNC;
        while (1) {
                if (likely(__spin_trylock(lock) == 0))
                        break;
@@ -124,6 +140,7 @@ static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long
 
 static __inline__ void __raw_spin_unlock(raw_spinlock_t *lock)
 {
+       SYNC_IO;
        __asm__ __volatile__("# __raw_spin_unlock\n\t"
                                LWSYNC_ON_SMP: : :"memory");
        lock->slock = 0;
index 89c6f1b..680555b 100644 (file)
@@ -63,7 +63,7 @@ extern inline int in_8(const volatile unsigned char __iomem *addr)
        int ret;
 
        __asm__ __volatile__(
-               "lbz%U1%X1 %0,%1;\n"
+               "sync; lbz%U1%X1 %0,%1;\n"
                "twi 0,%0,0;\n"
                "isync" : "=r" (ret) : "m" (*addr));
        return ret;
@@ -78,7 +78,7 @@ extern inline int in_le16(const volatile unsigned short __iomem *addr)
 {
        int ret;
 
-       __asm__ __volatile__("lhbrx %0,0,%1;\n"
+       __asm__ __volatile__("sync; lhbrx %0,0,%1;\n"
                             "twi 0,%0,0;\n"
                             "isync" : "=r" (ret) :
                              "r" (addr), "m" (*addr));
@@ -89,7 +89,7 @@ extern inline int in_be16(const volatile unsigned short __iomem *addr)
 {
        int ret;
 
-       __asm__ __volatile__("lhz%U1%X1 %0,%1;\n"
+       __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n"
                             "twi 0,%0,0;\n"
                             "isync" : "=r" (ret) : "m" (*addr));
        return ret;
@@ -97,20 +97,20 @@ extern inline int in_be16(const volatile unsigned short __iomem *addr)
 
 extern inline void out_le16(volatile unsigned short __iomem *addr, int val)
 {
-       __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) :
+       __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) :
                              "r" (val), "r" (addr));
 }
 
 extern inline void out_be16(volatile unsigned short __iomem *addr, int val)
 {
-       __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+       __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 
 extern inline unsigned in_le32(const volatile unsigned __iomem *addr)
 {
        unsigned ret;
 
-       __asm__ __volatile__("lwbrx %0,0,%1;\n"
+       __asm__ __volatile__("sync; lwbrx %0,0,%1;\n"
                             "twi 0,%0,0;\n"
                             "isync" : "=r" (ret) :
                             "r" (addr), "m" (*addr));
@@ -121,7 +121,7 @@ extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
 {
        unsigned ret;
 
-       __asm__ __volatile__("lwz%U1%X1 %0,%1;\n"
+       __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n"
                             "twi 0,%0,0;\n"
                             "isync" : "=r" (ret) : "m" (*addr));
        return ret;
@@ -129,13 +129,13 @@ extern inline unsigned in_be32(const volatile unsigned __iomem *addr)
 
 extern inline void out_le32(volatile unsigned __iomem *addr, int val)
 {
-       __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) :
+       __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) :
                             "r" (val), "r" (addr));
 }
 
 extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 {
-       __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val));
+       __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
 }
 #if defined (CONFIG_8260_PCI9)
 #define readb(addr) in_8((volatile u8 *)(addr))
@@ -259,6 +259,7 @@ extern __inline__ unsigned int name(unsigned int port)      \
 {                                                      \
        unsigned int x;                                 \
        __asm__ __volatile__(                           \
+               "sync\n"                                \
                "0:"    op "    %0,0,%1\n"              \
                "1:     twi     0,%0,0\n"               \
                "2:     isync\n"                        \
@@ -284,6 +285,7 @@ extern __inline__ unsigned int name(unsigned int port)      \
 extern __inline__ void name(unsigned int val, unsigned int port) \
 {                                                      \
        __asm__ __volatile__(                           \
+               "sync\n"                                \
                "0:" op " %0,0,%1\n"                    \
                "1:     sync\n"                         \
                "2:\n"                                  \
index a5559e3..5a057b0 100644 (file)
@@ -104,7 +104,7 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 /* PFN start number, because of __MEMORY_START */
 #define PFN_START              (__MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET                (FPN_START)
+#define ARCH_PFN_OFFSET                (PFN_START)
 #define virt_to_page(kaddr)    pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define pfn_valid(pfn)         (((pfn) - PFN_START) < max_mapnr)
 #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
index 81f722e..f3a9c92 100644 (file)
@@ -1,7 +1,7 @@
 #ifndef __ASM_SH64_BUG_H
 #define __ASM_SH64_BUG_H
 
-
+#ifdef CONFIG_BUG
 /*
  * Tell the user there is some problem, then force a segfault (in process
  * context) or a panic (interrupt context).
        *(volatile int *)0 = 0; \
 } while (0)
 
-#define BUG_ON(condition) do { \
-       if (unlikely((condition)!=0)) \
-               BUG(); \
-} while(0)
+#define HAVE_ARCH_BUG
+#endif
 
-#define WARN_ON(condition) do { \
-       if (unlikely((condition)!=0)) { \
-               printk("Badness in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \
-               dump_stack(); \
-       } \
-} while (0)
+#include <asm-generic/bug.h>
 
 #endif /* __ASM_SH64_BUG_H */
-
index f602ebe..7419d78 100644 (file)
@@ -14,7 +14,7 @@
 
 #include <asm/types.h>
 
-static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 {
        __asm__("byterev        %0, %0\n\t"
                "shari          %0, 32, %0"
@@ -23,7 +23,7 @@ static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
        return x;
 }
 
-static __inline__ __const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
 {
        __asm__("byterev        %0, %0\n\t"
                "shari          %0, 48, %0"
index a74a49e..68e27a8 100644 (file)
@@ -126,22 +126,30 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
 static inline void dma_sync_single_for_cpu(struct device *dev,
                                           dma_addr_t dma_handle, size_t size,
                                           enum dma_data_direction dir)
-       __attribute__ ((alias("dma_sync_single")));
+{
+       dma_sync_single(dev, dma_handle, size, dir);
+}
 
 static inline void dma_sync_single_for_device(struct device *dev,
                                           dma_addr_t dma_handle, size_t size,
                                           enum dma_data_direction dir)
-       __attribute__ ((alias("dma_sync_single")));
+{
+       dma_sync_single(dev, dma_handle, size, dir);
+}
 
 static inline void dma_sync_sg_for_cpu(struct device *dev,
                                       struct scatterlist *sg, int nelems,
                                       enum dma_data_direction dir)
-       __attribute__ ((alias("dma_sync_sg")));
+{
+       dma_sync_sg(dev, sg, nelems, dir);
+}
 
 static inline void dma_sync_sg_for_device(struct device *dev,
                                       struct scatterlist *sg, int nelems,
                                       enum dma_data_direction dir)
-       __attribute__ ((alias("dma_sync_sg")));
+{
+       dma_sync_sg(dev, sg, nelems, dir);
+}
 
 static inline int dma_get_cache_alignment(void)
 {
index dee4f77..252fedb 100644 (file)
@@ -123,6 +123,13 @@ void insw(unsigned long port, void *addr, unsigned long count);
 void outsl(unsigned long port, const void *addr, unsigned long count);
 void insl(unsigned long port, void *addr, unsigned long count);
 
+#define __raw_readb            readb
+#define __raw_readw            readw
+#define __raw_readl            readl
+#define __raw_writeb           writeb
+#define __raw_writew           writew
+#define __raw_writel           writel
+
 void memcpy_toio(void __iomem *to, const void *from, long count);
 void memcpy_fromio(void *to, void __iomem *from, long count);
 
index 56190f5..a6d4da5 100644 (file)
@@ -28,7 +28,7 @@ struct pt_regs {
 #ifdef __KERNEL__
 #define user_mode(regs) (((regs)->sr & 0x40000000)==0)
 #define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
+#define profile_pc(regs) ((unsigned long)instruction_pointer(regs))
 extern void show_regs(struct pt_regs *);
 #endif
 
index 87ef6f1..b1598c2 100644 (file)
@@ -64,7 +64,7 @@ extern void __xchg_called_with_bad_pointer(void);
 #define smp_read_barrier_depends()     do { } while (0)
 #endif /* CONFIG_SMP */
 
-#define set_rmb(var, value) do { xchg(&var, value); } while (0)
+#define set_rmb(var, value) do { (void)xchg(&var, value); } while (0)
 #define set_mb(var, value) set_rmb(var, value)
 
 /* Interrupt Control */
index f4936d8..644c67b 100644 (file)
@@ -128,25 +128,20 @@ do {                                                              \
 
 #define __get_user_nocheck(x,ptr,size)                         \
 ({                                                             \
-       long __gu_addr = (long)(ptr);                           \
-       long __gu_err;                                          \
-       __typeof(*(ptr)) __gu_val;                              \
-       __asm__ ("":"=r" (__gu_val));                           \
-       __asm__ ("":"=r" (__gu_err));                           \
-       __get_user_size((void *)&__gu_val, __gu_addr, (size), __gu_err); \
-       (x) = (__typeof__(*(ptr))) __gu_val;                    \
+       long __gu_err, __gu_val;                                \
+       __get_user_size((void *)&__gu_val, (long)(ptr),         \
+                       (size), __gu_err);                      \
+       (x) = (__typeof__(*(ptr)))__gu_val;                     \
        __gu_err;                                               \
 })
 
 #define __get_user_check(x,ptr,size)                           \
 ({                                                             \
        long __gu_addr = (long)(ptr);                           \
-       long __gu_err = -EFAULT;                                \
-       __typeof(*(ptr)) __gu_val;                              \
-       __asm__ ("":"=r" (__gu_val));                           \
-       __asm__ ("":"=r" (__gu_err));                           \
+       long __gu_err = -EFAULT, __gu_val;                      \
        if (__access_ok(__gu_addr, (size)))                     \
-               __get_user_size((void *)&__gu_val, __gu_addr, (size), __gu_err); \
+               __get_user_size((void *)&__gu_val, __gu_addr,   \
+                               (size), __gu_err);              \
        (x) = (__typeof__(*(ptr))) __gu_val;                    \
        __gu_err;                                               \
 })
index 88d1886..b7dc40b 100644 (file)
 
 #define MADV_FREE      0x5             /* (Solaris) contents can be freed */
 
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check        sparc_mmap_check
+int sparc_mmap_check(unsigned long addr, unsigned long len,
+               unsigned long flags);
+#endif
+#endif
+
 #endif /* __SPARC_MMAN_H__ */
index 6fd878e..8cc1860 100644 (file)
 
 #define MADV_FREE      0x5             /* (Solaris) contents can be freed */
 
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check        sparc64_mmap_check
+int sparc64_mmap_check(unsigned long addr, unsigned long len,
+               unsigned long flags);
+#endif
+#endif
+
 #endif /* __SPARC64_MMAN_H__ */
index 41788a3..2096e5c 100644 (file)
@@ -7,7 +7,6 @@
 #define LINUX_ATMDEV_H
 
 
-#include <linux/device.h>
 #include <linux/atmapi.h>
 #include <linux/atm.h>
 #include <linux/atmioc.h>
@@ -210,6 +209,7 @@ struct atm_cirange {
 
 #ifdef __KERNEL__
 
+#include <linux/device.h>
 #include <linux/wait.h> /* wait_queue_head_t */
 #include <linux/time.h> /* struct timeval */
 #include <linux/net.h>
index 64f9f9e..40a6c26 100644 (file)
 #define AUDIT_CLASS_DIR_WRITE_32 1
 #define AUDIT_CLASS_CHATTR 2
 #define AUDIT_CLASS_CHATTR_32 3
+#define AUDIT_CLASS_READ 4
+#define AUDIT_CLASS_READ_32 5
+#define AUDIT_CLASS_WRITE 6
+#define AUDIT_CLASS_WRITE_32 7
 
 /* This bitmask is used to validate user input.  It represents all bits that
  * are currently used in an audit field constant understood by the kernel.
 #define AUDIT_EXIT     103
 #define AUDIT_SUCCESS   104    /* exit >= 0; value ignored */
 #define AUDIT_WATCH    105
+#define AUDIT_PERM     106
 
 #define AUDIT_ARG0      200
 #define AUDIT_ARG1      (AUDIT_ARG0+1)
 #define AUDIT_ARCH_V850                (EM_V850|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_X86_64      (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 
+#define AUDIT_PERM_EXEC                1
+#define AUDIT_PERM_WRITE       2
+#define AUDIT_PERM_READ                4
+#define AUDIT_PERM_ATTR                8
+
 struct audit_status {
        __u32           mask;           /* Bit mask for valid entries */
        __u32           enabled;        /* 1 = enabled, 0 = disabled */
@@ -314,6 +324,7 @@ struct mqstat;
 #define AUDITSC_FAILURE 2
 #define AUDITSC_RESULT(x) ( ((long)(x))<0?AUDITSC_FAILURE:AUDITSC_SUCCESS )
 extern int __init audit_register_class(int class, unsigned *list);
+extern int audit_classify_syscall(int abi, unsigned syscall);
 #ifdef CONFIG_AUDITSYSCALL
 /* These are defined in auditsc.c */
                                /* Public API */
index 11487b6..561e2a7 100644 (file)
@@ -59,10 +59,14 @@ static inline void delayacct_tsk_init(struct task_struct *tsk)
                __delayacct_tsk_init(tsk);
 }
 
-static inline void delayacct_tsk_exit(struct task_struct *tsk)
+/* Free tsk->delays. Called from bad fork and __put_task_struct
+ * where there's no risk of tsk->delays being accessed elsewhere
+ */
+static inline void delayacct_tsk_free(struct task_struct *tsk)
 {
        if (tsk->delays)
-               __delayacct_tsk_exit(tsk);
+               kmem_cache_free(delayacct_cache, tsk->delays);
+       tsk->delays = NULL;
 }
 
 static inline void delayacct_blkio_start(void)
@@ -101,7 +105,7 @@ static inline void delayacct_init(void)
 {}
 static inline void delayacct_tsk_init(struct task_struct *tsk)
 {}
-static inline void delayacct_tsk_exit(struct task_struct *tsk)
+static inline void delayacct_tsk_free(struct task_struct *tsk)
 {}
 static inline void delayacct_blkio_start(void)
 {}
index e4bccbc..4fc379d 100644 (file)
@@ -80,6 +80,7 @@ struct hrtimer_sleeper {
  * @get_softirq_time:  function to retrieve the current time from the softirq
  * @curr_timer:                the timer which is executing a callback right now
  * @softirq_time:      the time when running the hrtimer queue in the softirq
+ * @lock_key:          the lock_class_key for use with lockdep
  */
 struct hrtimer_base {
        clockid_t               index;
index ed3396d..84eeecd 100644 (file)
@@ -56,7 +56,8 @@ typedef union {
 #endif
 } ktime_t;
 
-#define KTIME_MAX                      (~((u64)1 << 63))
+#define KTIME_MAX                      ((s64)~((u64)1 << 63))
+#define KTIME_SEC_MAX                  (KTIME_MAX / NSEC_PER_SEC)
 
 /*
  * ktime_t definitions when using the 64-bit scalar representation:
@@ -73,6 +74,10 @@ typedef union {
  */
 static inline ktime_t ktime_set(const long secs, const unsigned long nsecs)
 {
+#if (BITS_PER_LONG == 64)
+       if (unlikely(secs >= KTIME_SEC_MAX))
+               return (ktime_t){ .tv64 = KTIME_MAX };
+#endif
        return (ktime_t) { .tv64 = (s64)secs * NSEC_PER_SEC + (s64)nsecs };
 }
 
index c1f021e..ba095ae 100644 (file)
@@ -77,7 +77,7 @@ struct mmc_host {
        struct device           *dev;
        struct class_device     class_dev;
        int                     index;
-       struct mmc_host_ops     *ops;
+       const struct mmc_host_ops *ops;
        unsigned int            f_min;
        unsigned int            f_max;
        u32                     ocr_avail;
index 03a14a3..627e2c0 100644 (file)
@@ -105,6 +105,8 @@ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
 extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int,
        struct mmc_command *, int);
 
+extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int);
+
 extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card);
 
 static inline void mmc_claim_host(struct mmc_host *host)
index 656b588..f45163c 100644 (file)
@@ -77,6 +77,7 @@ struct per_cpu_pages {
 struct per_cpu_pageset {
        struct per_cpu_pages pcp[2];    /* 0: hot.  1: cold */
 #ifdef CONFIG_SMP
+       s8 stat_threshold;
        s8 vm_stat_diff[NR_VM_ZONE_STAT_ITEMS];
 #endif
 } ____cacheline_aligned_in_smp;
index 2474345..6c2066c 100644 (file)
@@ -9,27 +9,6 @@
 #ifndef _LINUX_NFS_FS_H
 #define _LINUX_NFS_FS_H
 
-#include <linux/in.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/rwsem.h>
-#include <linux/wait.h>
-
-#include <linux/sunrpc/debug.h>
-#include <linux/sunrpc/auth.h>
-#include <linux/sunrpc/clnt.h>
-
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-#include <linux/nfs4.h>
-#include <linux/nfs_xdr.h>
-
-#include <linux/nfs_fs_sb.h>
-
-#include <linux/rwsem.h>
-#include <linux/mempool.h>
-
 /*
  * Enable debugging support for nfs client.
  * Requires RPC_DEBUG.
  */
 #define NFS_SUPER_MAGIC                        0x6969
 
-/*
- * These are the default flags for swap requests
- */
-#define NFS_RPC_SWAPFLAGS              (RPC_TASK_SWAPPER|RPC_TASK_ROOTCREDS)
-
 /*
  * When flushing a cluster of dirty pages, there can be different
  * strategies:
 
 #ifdef __KERNEL__
 
+#include <linux/in.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <linux/wait.h>
+
+#include <linux/sunrpc/debug.h>
+#include <linux/sunrpc/auth.h>
+#include <linux/sunrpc/clnt.h>
+
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+#include <linux/nfs4.h>
+#include <linux/nfs_xdr.h>
+
+#include <linux/nfs_fs_sb.h>
+
+#include <linux/rwsem.h>
+#include <linux/mempool.h>
+
+/*
+ * These are the default flags for swap requests
+ */
+#define NFS_RPC_SWAPFLAGS              (RPC_TASK_SWAPPER|RPC_TASK_ROOTCREDS)
+
 /*
  * NFSv3/v4 Access mode cache entry
  */
@@ -427,7 +427,7 @@ extern int nfs_writeback_done(struct rpc_task *, struct nfs_write_data *);
 extern void nfs_writedata_release(void *);
 
 #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
-struct nfs_write_data *nfs_commit_alloc(unsigned int pagecount);
+struct nfs_write_data *nfs_commit_alloc(void);
 void nfs_commit_free(struct nfs_write_data *p);
 #endif
 
@@ -478,7 +478,7 @@ static inline int nfs_wb_page(struct inode *inode, struct page* page)
 /*
  * Allocate nfs_write_data structures
  */
-extern struct nfs_write_data *nfs_writedata_alloc(unsigned int pagecount);
+extern struct nfs_write_data *nfs_writedata_alloc(size_t len);
 
 /*
  * linux/fs/nfs/read.c
@@ -492,7 +492,7 @@ extern void nfs_readdata_release(void *data);
 /*
  * Allocate nfs_read_data structures
  */
-extern struct nfs_read_data *nfs_readdata_alloc(unsigned int pagecount);
+extern struct nfs_read_data *nfs_readdata_alloc(size_t len);
 
 /*
  * linux/fs/nfs3proc.c
index db9cbf6..41e5a19 100644 (file)
@@ -729,7 +729,7 @@ struct nfs_read_data {
        struct list_head        pages;  /* Coalesced read requests */
        struct nfs_page         *req;   /* multi ops per nfs_page */
        struct page             **pagevec;
-       unsigned int            npages; /* active pages in pagevec */
+       unsigned int            npages; /* Max length of pagevec */
        struct nfs_readargs args;
        struct nfs_readres  res;
 #ifdef CONFIG_NFS_V4
@@ -748,7 +748,7 @@ struct nfs_write_data {
        struct list_head        pages;          /* Coalesced requests we wish to flush */
        struct nfs_page         *req;           /* multi ops per nfs_page */
        struct page             **pagevec;
-       unsigned int            npages;         /* active pages in pagevec */
+       unsigned int            npages;         /* Max length of pagevec */
        struct nfs_writeargs    args;           /* argument struct */
        struct nfs_writeres     res;            /* result struct */
 #ifdef CONFIG_NFS_V4
index 4c2839e..7a24915 100644 (file)
 #define PCI_DEVICE_ID_SI_962           0x0962
 #define PCI_DEVICE_ID_SI_963           0x0963
 #define PCI_DEVICE_ID_SI_965           0x0965
+#define PCI_DEVICE_ID_SI_966           0x0966
+#define PCI_DEVICE_ID_SI_968           0x0968
 #define PCI_DEVICE_ID_SI_5511          0x5511
 #define PCI_DEVICE_ID_SI_5513          0x5513
 #define PCI_DEVICE_ID_SI_5517          0x5517
 #define PCI_DEVICE_ID_VIA_8367_0       0x3099
 #define PCI_DEVICE_ID_VIA_8653_0       0x3101
 #define PCI_DEVICE_ID_VIA_8622         0x3102
+#define PCI_DEVICE_ID_VIA_8235_USB_2   0x3104
 #define PCI_DEVICE_ID_VIA_8233C_0      0x3109
 #define PCI_DEVICE_ID_VIA_8361         0x3112
 #define PCI_DEVICE_ID_VIA_XM266                0x3116
index 6674fc1..34ed0d9 100644 (file)
@@ -994,7 +994,6 @@ struct task_struct {
         */
        struct pipe_inode_info *splice_pipe;
 #ifdef CONFIG_TASK_DELAY_ACCT
-       spinlock_t delays_lock;
        struct task_delay_info *delays;
 #endif
 };
index 19bb653..d543d38 100644 (file)
@@ -57,7 +57,6 @@
 #include <linux/time.h>
 
 #include <asm/param.h>
-#include <asm/timex.h>
 
 /*
  * SHIFT_KG and SHIFT_KF establish the damping of the PLL and are chosen
@@ -191,6 +190,8 @@ struct timex {
 #define TIME_BAD       TIME_ERROR /* bw compat */
 
 #ifdef __KERNEL__
+#include <asm/timex.h>
+
 /*
  * kernel variables
  * Note: maximum error = NTP synch distance = dispersion + delay / 2;
index 518c7a3..8dba97a 100644 (file)
@@ -14,8 +14,7 @@
 
 #include <linux/videodev2.h>
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define HAVE_V4L1 1
+#if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
 
 struct video_capability
 {
index b714695..e3715d7 100644 (file)
@@ -22,8 +22,6 @@
 #endif
 #include <linux/types.h>
 
-#define HAVE_V4L2 1
-
 /*
  * Common stuff for both V4L1 and V4L2
  * Moved from videodev.h
index 600d61d..810462f 100644 (file)
@@ -194,7 +194,7 @@ struct video_device
 
 
        int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
                        /* buffer type is struct vidio_mbuf * */
        int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
 #endif
@@ -335,7 +335,7 @@ extern int video_usercopy(struct inode *inode, struct file *file,
                                      unsigned int cmd, void *arg));
 
 
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 #include <linux/mm.h>
 
 extern struct video_device* video_devdata(struct file*);
@@ -357,6 +357,8 @@ video_device_remove_file(struct video_device *vfd,
        class_device_remove_file(&vfd->class_dev, attr);
 }
 
+#endif /* CONFIG_VIDEO_V4L1_COMPAT */
+
 #ifdef OBSOLETE_OWNER /* to be removed soon */
 /* helper functions to access driver private data. */
 static inline void *video_get_drvdata(struct video_device *dev)
@@ -372,6 +374,5 @@ static inline void video_set_drvdata(struct video_device *dev, void *data)
 
 extern int video_exclusive_open(struct inode *inode, struct file *file);
 extern int video_exclusive_release(struct inode *inode, struct file *file);
-#endif /* HAVE_V4L1 */
 
 #endif /* _V4L2_DEV_H */
index 0a36091..963fd15 100644 (file)
@@ -1028,6 +1028,9 @@ void audit_log_hex(struct audit_buffer *ab, const unsigned char *buf,
        struct sk_buff *skb;
        static const unsigned char *hex = "0123456789ABCDEF";
 
+       if (!ab)
+               return;
+
        BUG_ON(!ab->skb);
        skb = ab->skb;
        avail = skb_tailroom(skb);
@@ -1060,6 +1063,9 @@ static void audit_log_n_string(struct audit_buffer *ab, size_t slen,
        unsigned char *ptr;
        struct sk_buff *skb;
 
+       if (!ab)
+               return;
+
        BUG_ON(!ab->skb);
        skb = ab->skb;
        avail = skb_tailroom(skb);
index 6aa33b8..a337023 100644 (file)
@@ -104,6 +104,7 @@ static inline int audit_hash_ino(u32 ino)
        return (ino & (AUDIT_INODE_BUCKETS-1));
 }
 
+extern int audit_match_class(int class, unsigned syscall);
 extern int audit_comparator(const u32 left, const u32 op, const u32 right);
 extern int audit_compare_dname_path(const char *dname, const char *path,
                                    int *dirlen);
index 6a9a5c5..a44879b 100644 (file)
@@ -302,6 +302,15 @@ int __init audit_register_class(int class, unsigned *list)
        return 0;
 }
 
+int audit_match_class(int class, unsigned syscall)
+{
+       if (unlikely(syscall >= AUDIT_BITMASK_SIZE * sizeof(__u32)))
+               return 0;
+       if (unlikely(class >= AUDIT_SYSCALL_CLASSES || !classes[class]))
+               return 0;
+       return classes[class][AUDIT_WORD(syscall)] & AUDIT_BIT(syscall);
+}
+
 /* Common user-space to kernel rule translation. */
 static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule)
 {
@@ -404,6 +413,7 @@ static struct audit_entry *audit_rule_to_entry(struct audit_rule *rule)
                case AUDIT_PERS:
                case AUDIT_ARCH:
                case AUDIT_MSGTYPE:
+               case AUDIT_PPID:
                case AUDIT_DEVMAJOR:
                case AUDIT_DEVMINOR:
                case AUDIT_EXIT:
@@ -413,6 +423,10 @@ static struct audit_entry *audit_rule_to_entry(struct audit_rule *rule)
                case AUDIT_ARG2:
                case AUDIT_ARG3:
                        break;
+               case AUDIT_PERM:
+                       if (f->val & ~15)
+                               goto exit_free;
+                       break;
                case AUDIT_INODE:
                        err = audit_to_inode(&entry->rule, f);
                        if (err)
@@ -567,6 +581,10 @@ static struct audit_entry *audit_data_to_entry(struct audit_rule_data *data,
                        entry->rule.buflen += f->val;
                        entry->rule.filterkey = str;
                        break;
+               case AUDIT_PERM:
+                       if (f->val & ~15)
+                               goto exit_free;
+                       break;
                default:
                        goto exit_free;
                }
@@ -913,7 +931,7 @@ static void audit_update_watch(struct audit_parent *parent,
                }
 
                ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE);
-               audit_log_format(ab, "audit updated rules specifying watch=");
+               audit_log_format(ab, "audit updated rules specifying path=");
                audit_log_untrustedstring(ab, owatch->path);
                audit_log_format(ab, " with dev=%u ino=%lu\n", dev, ino);
                audit_log_end(ab);
@@ -936,19 +954,28 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
        struct audit_watch *w, *nextw;
        struct audit_krule *r, *nextr;
        struct audit_entry *e;
+       struct audit_buffer *ab;
 
        mutex_lock(&audit_filter_mutex);
        parent->flags |= AUDIT_PARENT_INVALID;
        list_for_each_entry_safe(w, nextw, &parent->watches, wlist) {
                list_for_each_entry_safe(r, nextr, &w->rules, rlist) {
                        e = container_of(r, struct audit_entry, rule);
+
+                       ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE);
+                       audit_log_format(ab, "audit implicitly removed rule path=");
+                       audit_log_untrustedstring(ab, w->path);
+                       if (r->filterkey) {
+                               audit_log_format(ab, " key=");
+                               audit_log_untrustedstring(ab, r->filterkey);
+                       } else
+                               audit_log_format(ab, " key=(null)");
+                       audit_log_format(ab, " list=%d", r->listnr);
+                       audit_log_end(ab);
+
                        list_del(&r->rlist);
                        list_del_rcu(&e->list);
                        call_rcu(&e->rcu, audit_free_rule_rcu);
-
-                       audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
-                                "audit implicitly removed rule from list=%d\n",
-                                 AUDIT_FILTER_EXIT);
                }
                audit_remove_watch(w);
        }
index efc1b74..1bd8827 100644 (file)
@@ -209,6 +209,54 @@ struct audit_context {
 #endif
 };
 
+#define ACC_MODE(x) ("\004\002\006\006"[(x)&O_ACCMODE])
+static inline int open_arg(int flags, int mask)
+{
+       int n = ACC_MODE(flags);
+       if (flags & (O_TRUNC | O_CREAT))
+               n |= AUDIT_PERM_WRITE;
+       return n & mask;
+}
+
+static int audit_match_perm(struct audit_context *ctx, int mask)
+{
+       unsigned n = ctx->major;
+       switch (audit_classify_syscall(ctx->arch, n)) {
+       case 0: /* native */
+               if ((mask & AUDIT_PERM_WRITE) &&
+                    audit_match_class(AUDIT_CLASS_WRITE, n))
+                       return 1;
+               if ((mask & AUDIT_PERM_READ) &&
+                    audit_match_class(AUDIT_CLASS_READ, n))
+                       return 1;
+               if ((mask & AUDIT_PERM_ATTR) &&
+                    audit_match_class(AUDIT_CLASS_CHATTR, n))
+                       return 1;
+               return 0;
+       case 1: /* 32bit on biarch */
+               if ((mask & AUDIT_PERM_WRITE) &&
+                    audit_match_class(AUDIT_CLASS_WRITE_32, n))
+                       return 1;
+               if ((mask & AUDIT_PERM_READ) &&
+                    audit_match_class(AUDIT_CLASS_READ_32, n))
+                       return 1;
+               if ((mask & AUDIT_PERM_ATTR) &&
+                    audit_match_class(AUDIT_CLASS_CHATTR_32, n))
+                       return 1;
+               return 0;
+       case 2: /* open */
+               return mask & ACC_MODE(ctx->argv[1]);
+       case 3: /* openat */
+               return mask & ACC_MODE(ctx->argv[2]);
+       case 4: /* socketcall */
+               return ((mask & AUDIT_PERM_WRITE) && ctx->argv[0] == SYS_BIND);
+       case 5: /* execve */
+               return mask & AUDIT_PERM_EXEC;
+       default:
+               return 0;
+       }
+}
+
 /* Determine if any context name data matches a rule's watch data */
 /* Compare a task_struct with an audit_rule.  Return 1 on match, 0
  * otherwise. */
@@ -397,6 +445,9 @@ static int audit_filter_rules(struct task_struct *tsk,
                        /* ignore this field for filtering */
                        result = 1;
                        break;
+               case AUDIT_PERM:
+                       result = audit_match_perm(ctx, f->val);
+                       break;
                }
 
                if (!result)
index 57ca373..36752f1 100644 (file)
@@ -41,24 +41,11 @@ void delayacct_init(void)
 
 void __delayacct_tsk_init(struct task_struct *tsk)
 {
-       spin_lock_init(&tsk->delays_lock);
-       /* No need to acquire tsk->delays_lock for allocation here unless
-          __delayacct_tsk_init called after tsk is attached to tasklist
-       */
        tsk->delays = kmem_cache_zalloc(delayacct_cache, SLAB_KERNEL);
        if (tsk->delays)
                spin_lock_init(&tsk->delays->lock);
 }
 
-void __delayacct_tsk_exit(struct task_struct *tsk)
-{
-       struct task_delay_info *delays = tsk->delays;
-       spin_lock(&tsk->delays_lock);
-       tsk->delays = NULL;
-       spin_unlock(&tsk->delays_lock);
-       kmem_cache_free(delayacct_cache, delays);
-}
-
 /*
  * Start accounting for a delay statistic using
  * its starting timestamp (@start)
@@ -118,8 +105,6 @@ int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
        struct timespec ts;
        unsigned long t1,t2,t3;
 
-       spin_lock(&tsk->delays_lock);
-
        /* Though tsk->delays accessed later, early exit avoids
         * unnecessary returning of other data
         */
@@ -161,7 +146,6 @@ int __delayacct_add_tsk(struct taskstats *d, struct task_struct *tsk)
        spin_unlock(&tsk->delays->lock);
 
 done:
-       spin_unlock(&tsk->delays_lock);
        return 0;
 }
 
index dba194a..d891883 100644 (file)
@@ -908,7 +908,6 @@ fastcall NORET_TYPE void do_exit(long code)
                audit_free(tsk);
        taskstats_exit_send(tsk, tidstats, group_dead, mycpu);
        taskstats_exit_free(tidstats);
-       delayacct_tsk_exit(tsk);
 
        exit_mm(tsk);
 
@@ -1054,7 +1053,7 @@ static int eligible_child(pid_t pid, int options, struct task_struct *p)
         * Do not consider thread group leaders that are
         * in a non-empty thread group:
         */
-       if (current->tgid != p->tgid && delay_group_leader(p))
+       if (delay_group_leader(p))
                return 2;
 
        if (security_task_wait(p))
index aa36c43..f9b014e 100644 (file)
@@ -117,6 +117,7 @@ void __put_task_struct(struct task_struct *tsk)
        security_task_free(tsk);
        free_uid(tsk->user);
        put_group_info(tsk->group_info);
+       delayacct_tsk_free(tsk);
 
        if (!profile_handoff_task(tsk))
                free_task(tsk);
@@ -1011,7 +1012,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
        retval = -EFAULT;
        if (clone_flags & CLONE_PARENT_SETTID)
                if (put_user(p->pid, parent_tidptr))
-                       goto bad_fork_cleanup;
+                       goto bad_fork_cleanup_delays_binfmt;
 
        INIT_LIST_HEAD(&p->children);
        INIT_LIST_HEAD(&p->sibling);
@@ -1277,7 +1278,8 @@ bad_fork_cleanup_policy:
 bad_fork_cleanup_cpuset:
 #endif
        cpuset_exit(p);
-bad_fork_cleanup:
+bad_fork_cleanup_delays_binfmt:
+       delayacct_tsk_free(p);
        if (p->binfmt)
                module_put(p->binfmt->module);
 bad_fork_cleanup_put_domain:
index b9b8aea..9d260e8 100644 (file)
@@ -1120,9 +1120,10 @@ static int futex_wait(u32 __user *uaddr, u32 val, unsigned long time)
  * if there are waiters then it will block, it does PI, etc. (Due to
  * races the kernel might see a 0 value of the futex too.)
  */
-static int do_futex_lock_pi(u32 __user *uaddr, int detect, int trylock,
-                           struct hrtimer_sleeper *to)
+static int futex_lock_pi(u32 __user *uaddr, int detect, unsigned long sec,
+                        long nsec, int trylock)
 {
+       struct hrtimer_sleeper timeout, *to = NULL;
        struct task_struct *curr = current;
        struct futex_hash_bucket *hb;
        u32 uval, newval, curval;
@@ -1132,6 +1133,13 @@ static int do_futex_lock_pi(u32 __user *uaddr, int detect, int trylock,
        if (refill_pi_state_cache())
                return -ENOMEM;
 
+       if (sec != MAX_SCHEDULE_TIMEOUT) {
+               to = &timeout;
+               hrtimer_init(&to->timer, CLOCK_REALTIME, HRTIMER_ABS);
+               hrtimer_init_sleeper(to, current);
+               to->timer.expires = ktime_set(sec, nsec);
+       }
+
        q.pi_state = NULL;
  retry:
        down_read(&curr->mm->mmap_sem);
@@ -1307,7 +1315,7 @@ static int do_futex_lock_pi(u32 __user *uaddr, int detect, int trylock,
        if (!detect && ret == -EDEADLK && 0)
                force_sig(SIGKILL, current);
 
-       return ret;
+       return ret != -EINTR ? ret : -ERESTARTNOINTR;
 
  out_unlock_release_sem:
        queue_unlock(&q, hb);
@@ -1341,76 +1349,6 @@ static int do_futex_lock_pi(u32 __user *uaddr, int detect, int trylock,
        return ret;
 }
 
-/*
- * Restart handler
- */
-static long futex_lock_pi_restart(struct restart_block *restart)
-{
-       struct hrtimer_sleeper timeout, *to = NULL;
-       int ret;
-
-       restart->fn = do_no_restart_syscall;
-
-       if (restart->arg2 || restart->arg3) {
-               to = &timeout;
-               hrtimer_init(&to->timer, CLOCK_REALTIME, HRTIMER_ABS);
-               hrtimer_init_sleeper(to, current);
-               to->timer.expires.tv64 = ((u64)restart->arg1 << 32) |
-                       (u64) restart->arg0;
-       }
-
-       pr_debug("lock_pi restart: %p, %d (%d)\n",
-                (u32 __user *)restart->arg0, current->pid);
-
-       ret = do_futex_lock_pi((u32 __user *)restart->arg0, restart->arg1,
-                              0, to);
-
-       if (ret != -EINTR)
-               return ret;
-
-       restart->fn = futex_lock_pi_restart;
-
-       /* The other values are filled in */
-       return -ERESTART_RESTARTBLOCK;
-}
-
-/*
- * Called from the syscall entry below.
- */
-static int futex_lock_pi(u32 __user *uaddr, int detect, unsigned long sec,
-                        long nsec, int trylock)
-{
-       struct hrtimer_sleeper timeout, *to = NULL;
-       struct restart_block *restart;
-       int ret;
-
-       if (sec != MAX_SCHEDULE_TIMEOUT) {
-               to = &timeout;
-               hrtimer_init(&to->timer, CLOCK_REALTIME, HRTIMER_ABS);
-               hrtimer_init_sleeper(to, current);
-               to->timer.expires = ktime_set(sec, nsec);
-       }
-
-       ret = do_futex_lock_pi(uaddr, detect, trylock, to);
-
-       if (ret != -EINTR)
-               return ret;
-
-       pr_debug("lock_pi interrupted: %p, %d (%d)\n", uaddr, current->pid);
-
-       restart = &current_thread_info()->restart_block;
-       restart->fn = futex_lock_pi_restart;
-       restart->arg0 = (unsigned long) uaddr;
-       restart->arg1 = detect;
-       if (to) {
-               restart->arg2 = to->timer.expires.tv64 & 0xFFFFFFFF;
-               restart->arg3 = to->timer.expires.tv64 >> 32;
-       } else
-               restart->arg2 = restart->arg3 = 0;
-
-       return -ERESTART_RESTARTBLOCK;
-}
-
 /*
  * Userspace attempted a TID -> 0 atomic transition, and failed.
  * This is the in-kernel slowpath: we look up the PI state (if any),
index fc4e906..48a53f6 100644 (file)
 
 /**
  * handle_bad_irq - handle spurious and unhandled irqs
+ * @irq:       the interrupt number
+ * @desc:      description of the interrupt
+ * @regs:      pointer to a register structure
+ *
+ * Handles spurious and unhandled IRQ's. It also prints a debugmessage.
  */
 void fastcall
 handle_bad_irq(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs)
index 0d355f2..eab043c 100644 (file)
@@ -27,7 +27,7 @@
  * Stack-trace: tightly packed array of stack backtrace
  * addresses. Protected by the hash_lock.
  */
-#define MAX_STACK_TRACE_ENTRIES        131072UL
+#define MAX_STACK_TRACE_ENTRIES        262144UL
 
 extern struct list_head all_lock_classes;
 
index 9b8dcfd..8010b9b 100644 (file)
@@ -173,7 +173,7 @@ const char *print_tainted(void)
 
 void add_taint(unsigned flag)
 {
-       debug_locks_off(); /* can't trust the integrity of the kernel anymore */
+       debug_locks = 0; /* can't trust the integrity of the kernel anymore */
        tainted |= flag;
 }
 EXPORT_SYMBOL(add_taint);
index ae44a70..619ecab 100644 (file)
@@ -56,7 +56,7 @@ config PM_TRACE
 
 config SOFTWARE_SUSPEND
        bool "Software Suspend"
-       depends on PM && SWAP && (X86 && (!SMP || SUSPEND_SMP)) || ((FRV || PPC32) && !SMP)
+       depends on PM && SWAP && ((X86 && (!SMP || SUSPEND_SMP) && !X86_PAE) || ((FRV || PPC32) && !SMP))
        ---help---
          Enable the possibility of suspending the machine.
          It doesn't need ACPI or APM.
@@ -78,6 +78,10 @@ config SOFTWARE_SUSPEND
 
          For more information take a look at <file:Documentation/power/swsusp.txt>.
 
+         (For now, swsusp is incompatible with PAE aka HIGHMEM_64G on i386.
+         we need identity mapping for resume to work, and that is trivial
+         to get with 4MB pages, but less than trivial on PAE).
+
 config PM_STD_PARTITION
        string "Default resume partition"
        depends on SOFTWARE_SUSPEND
index 436ab35..523e464 100644 (file)
@@ -241,12 +241,16 @@ static void rcu_do_batch(struct rcu_data *rdp)
                next = rdp->donelist = list->next;
                list->func(list);
                list = next;
-               rdp->qlen--;
                if (++count >= rdp->blimit)
                        break;
        }
+
+       local_irq_disable();
+       rdp->qlen -= count;
+       local_irq_enable();
        if (rdp->blimit == INT_MAX && rdp->qlen <= qlowmark)
                rdp->blimit = blimit;
+
        if (!rdp->donelist)
                rdp->donetail = &rdp->donelist;
        else
index bfd6ad9..fb524b0 100644 (file)
@@ -72,7 +72,7 @@ EXPORT_SYMBOL(_write_trylock);
  * not re-enabled during lock-acquire (which the preempt-spin-ops do):
  */
 #if !defined(CONFIG_PREEMPT) || !defined(CONFIG_SMP) || \
-       defined(CONFIG_PROVE_LOCKING)
+       defined(CONFIG_DEBUG_LOCK_ALLOC)
 
 void __lockfunc _read_lock(rwlock_t *lock)
 {
index f629934..734ce95 100644 (file)
@@ -38,6 +38,11 @@ config LIBCRC32C
          require M here.  See Castagnoli93.
          Module will be libcrc32c.
 
+config AUDIT_GENERIC
+       bool
+       depends on AUDIT && !AUDIT_ARCH
+       default y
+
 #
 # compression support is select'ed if needed
 #
index be9719a..ef1d37a 100644 (file)
@@ -49,6 +49,7 @@ obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
 obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
 obj-$(CONFIG_TEXTSEARCH_FSM) += ts_fsm.o
 obj-$(CONFIG_SMP) += percpu_counter.o
+obj-$(CONFIG_AUDIT_GENERIC) += audit.o
 
 obj-$(CONFIG_SWIOTLB) += swiotlb.o
 
diff --git a/lib/audit.c b/lib/audit.c
new file mode 100644 (file)
index 0000000..8c21625
--- /dev/null
@@ -0,0 +1,53 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+       switch(syscall) {
+       case __NR_open:
+               return 2;
+       case __NR_openat:
+               return 3;
+#ifdef __NR_socketcall
+       case __NR_socketcall:
+               return 4;
+#endif
+       case __NR_execve:
+               return 5;
+       default:
+               return 0;
+       }
+}
+
+static int __init audit_classes_init(void)
+{
+       audit_register_class(AUDIT_CLASS_WRITE, write_class);
+       audit_register_class(AUDIT_CLASS_READ, read_class);
+       audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+       audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+       return 0;
+}
+
+__initcall(audit_classes_init);
index e07e27e..a9963ce 100644 (file)
@@ -1176,7 +1176,15 @@ static inline unsigned interleave_nid(struct mempolicy *pol,
        if (vma) {
                unsigned long off;
 
-               off = vma->vm_pgoff;
+               /*
+                * for small pages, there is no difference between
+                * shift and PAGE_SHIFT, so the bit-shift is safe.
+                * for huge pages, since vm_pgoff is in units of small
+                * pages, we need to shift off the always 0 bits to get
+                * a useful offset.
+                */
+               BUG_ON(shift < PAGE_SHIFT);
+               off = vma->vm_pgoff >> (shift - PAGE_SHIFT);
                off += (addr - vma->vm_start) >> shift;
                return offset_il_node(pol, vma, off);
        } else
index fe6e052..ccd8cb8 100644 (file)
@@ -238,8 +238,13 @@ repeat_alloc:
        init_wait(&wait);
        prepare_to_wait(&pool->wait, &wait, TASK_UNINTERRUPTIBLE);
        smp_mb();
-       if (!pool->curr_nr)
-               io_schedule();
+       if (!pool->curr_nr) {
+               /*
+                * FIXME: this should be io_schedule().  The timeout is there
+                * as a workaround for some DM problems in 2.6.18.
+                */
+               io_schedule_timeout(5*HZ);
+       }
        finish_wait(&pool->wait, &wait);
 
        goto repeat_alloc;
index c1868ec..e66a0b5 100644 (file)
--- a/mm/mmap.c
+++ b/mm/mmap.c
 #include <asm/cacheflush.h>
 #include <asm/tlb.h>
 
+#ifndef arch_mmap_check
+#define arch_mmap_check(addr, len, flags)      (0)
+#endif
+
 static void unmap_region(struct mm_struct *mm,
                struct vm_area_struct *vma, struct vm_area_struct *prev,
                unsigned long start, unsigned long end);
@@ -913,6 +917,10 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr,
        if (!len)
                return -EINVAL;
 
+       error = arch_mmap_check(addr, len, flags);
+       if (error)
+               return error;
+
        /* Careful about overflows.. */
        len = PAGE_ALIGN(len);
        if (!len || len > TASK_SIZE)
@@ -1859,6 +1867,7 @@ unsigned long do_brk(unsigned long addr, unsigned long len)
        unsigned long flags;
        struct rb_node ** rb_link, * rb_parent;
        pgoff_t pgoff = addr >> PAGE_SHIFT;
+       int error;
 
        len = PAGE_ALIGN(len);
        if (!len)
@@ -1867,6 +1876,12 @@ unsigned long do_brk(unsigned long addr, unsigned long len)
        if ((addr + len) > TASK_SIZE || (addr + len) < addr)
                return -EINVAL;
 
+       flags = VM_DATA_DEFAULT_FLAGS | VM_ACCOUNT | mm->def_flags;
+
+       error = arch_mmap_check(addr, len, flags);
+       if (error)
+               return error;
+
        /*
         * mlock MCL_FUTURE?
         */
@@ -1907,8 +1922,6 @@ unsigned long do_brk(unsigned long addr, unsigned long len)
        if (security_vm_enough_memory(len >> PAGE_SHIFT))
                return -ENOMEM;
 
-       flags = VM_DATA_DEFAULT_FLAGS | VM_ACCOUNT | mm->def_flags;
-
        /* Can we just expand an old private anonymous mapping? */
        if (vma_merge(mm, prev, addr, addr + len, flags,
                                        NULL, NULL, pgoff, NULL))
index cf1b015..c6ab55e 100644 (file)
@@ -68,10 +68,10 @@ invalidate_complete_page(struct address_space *mapping, struct page *page)
                return 0;
 
        write_lock_irq(&mapping->tree_lock);
-       if (PageDirty(page)) {
-               write_unlock_irq(&mapping->tree_lock);
-               return 0;
-       }
+       if (PageDirty(page))
+               goto failed;
+       if (page_count(page) != 2)      /* caller's ref + pagecache ref */
+               goto failed;
 
        BUG_ON(PagePrivate(page));
        __remove_from_page_cache(page);
@@ -79,6 +79,9 @@ invalidate_complete_page(struct address_space *mapping, struct page *page)
        ClearPageUptodate(page);
        page_cache_release(page);       /* pagecache ref */
        return 1;
+failed:
+       write_unlock_irq(&mapping->tree_lock);
+       return 0;
 }
 
 /**
index dfdf241..c1b5f41 100644 (file)
@@ -12,6 +12,7 @@
 #include <linux/config.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/cpu.h>
 
 void __get_zone_counts(unsigned long *active, unsigned long *inactive,
                        unsigned long *free, struct pglist_data *pgdat)
@@ -114,17 +115,72 @@ EXPORT_SYMBOL(vm_stat);
 
 #ifdef CONFIG_SMP
 
-#define STAT_THRESHOLD 32
+static int calculate_threshold(struct zone *zone)
+{
+       int threshold;
+       int mem;        /* memory in 128 MB units */
+
+       /*
+        * The threshold scales with the number of processors and the amount
+        * of memory per zone. More memory means that we can defer updates for
+        * longer, more processors could lead to more contention.
+        * fls() is used to have a cheap way of logarithmic scaling.
+        *
+        * Some sample thresholds:
+        *
+        * Threshold    Processors      (fls)   Zonesize        fls(mem+1)
+        * ------------------------------------------------------------------
+        * 8            1               1       0.9-1 GB        4
+        * 16           2               2       0.9-1 GB        4
+        * 20           2               2       1-2 GB          5
+        * 24           2               2       2-4 GB          6
+        * 28           2               2       4-8 GB          7
+        * 32           2               2       8-16 GB         8
+        * 4            2               2       <128M           1
+        * 30           4               3       2-4 GB          5
+        * 48           4               3       8-16 GB         8
+        * 32           8               4       1-2 GB          4
+        * 32           8               4       0.9-1GB         4
+        * 10           16              5       <128M           1
+        * 40           16              5       900M            4
+        * 70           64              7       2-4 GB          5
+        * 84           64              7       4-8 GB          6
+        * 108          512             9       4-8 GB          6
+        * 125          1024            10      8-16 GB         8
+        * 125          1024            10      16-32 GB        9
+        */
+
+       mem = zone->present_pages >> (27 - PAGE_SHIFT);
+
+       threshold = 2 * fls(num_online_cpus()) * (1 + fls(mem));
+
+       /*
+        * Maximum threshold is 125
+        */
+       threshold = min(125, threshold);
+
+       return threshold;
+}
 
 /*
- * Determine pointer to currently valid differential byte given a zone and
- * the item number.
- *
- * Preemption must be off
+ * Refresh the thresholds for each zone.
  */
-static inline s8 *diff_pointer(struct zone *zone, enum zone_stat_item item)
+static void refresh_zone_stat_thresholds(void)
 {
-       return &zone_pcp(zone, smp_processor_id())->vm_stat_diff[item];
+       struct zone *zone;
+       int cpu;
+       int threshold;
+
+       for_each_zone(zone) {
+
+               if (!zone->present_pages)
+                       continue;
+
+               threshold = calculate_threshold(zone);
+
+               for_each_online_cpu(cpu)
+                       zone_pcp(zone, cpu)->stat_threshold = threshold;
+       }
 }
 
 /*
@@ -133,17 +189,16 @@ static inline s8 *diff_pointer(struct zone *zone, enum zone_stat_item item)
 void __mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
                                int delta)
 {
-       s8 *p;
+       struct per_cpu_pageset *pcp = zone_pcp(zone, smp_processor_id());
+       s8 *p = pcp->vm_stat_diff + item;
        long x;
 
-       p = diff_pointer(zone, item);
        x = delta + *p;
 
-       if (unlikely(x > STAT_THRESHOLD || x < -STAT_THRESHOLD)) {
+       if (unlikely(x > pcp->stat_threshold || x < -pcp->stat_threshold)) {
                zone_page_state_add(x, zone, item);
                x = 0;
        }
-
        *p = x;
 }
 EXPORT_SYMBOL(__mod_zone_page_state);
@@ -172,10 +227,12 @@ EXPORT_SYMBOL(mod_zone_page_state);
  * No overflow check is necessary and therefore the differential can be
  * incremented or decremented in place which may allow the compilers to
  * generate better code.
- *
  * The increment or decrement is known and therefore one boundary check can
  * be omitted.
  *
+ * NOTE: These functions are very performance sensitive. Change only
+ * with care.
+ *
  * Some processors have inc/dec instructions that are atomic vs an interrupt.
  * However, the code must first determine the differential location in a zone
  * based on the processor number and then inc/dec the counter. There is no
@@ -185,13 +242,16 @@ EXPORT_SYMBOL(mod_zone_page_state);
  */
 static void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
 {
-       s8 *p = diff_pointer(zone, item);
+       struct per_cpu_pageset *pcp = zone_pcp(zone, smp_processor_id());
+       s8 *p = pcp->vm_stat_diff + item;
 
        (*p)++;
 
-       if (unlikely(*p > STAT_THRESHOLD)) {
-               zone_page_state_add(*p, zone, item);
-               *p = 0;
+       if (unlikely(*p > pcp->stat_threshold)) {
+               int overstep = pcp->stat_threshold / 2;
+
+               zone_page_state_add(*p + overstep, zone, item);
+               *p = -overstep;
        }
 }
 
@@ -204,13 +264,16 @@ EXPORT_SYMBOL(__inc_zone_page_state);
 void __dec_zone_page_state(struct page *page, enum zone_stat_item item)
 {
        struct zone *zone = page_zone(page);
-       s8 *p = diff_pointer(zone, item);
+       struct per_cpu_pageset *pcp = zone_pcp(zone, smp_processor_id());
+       s8 *p = pcp->vm_stat_diff + item;
 
        (*p)--;
 
-       if (unlikely(*p < -STAT_THRESHOLD)) {
-               zone_page_state_add(*p, zone, item);
-               *p = 0;
+       if (unlikely(*p < - pcp->stat_threshold)) {
+               int overstep = pcp->stat_threshold / 2;
+
+               zone_page_state_add(*p - overstep, zone, item);
+               *p = overstep;
        }
 }
 EXPORT_SYMBOL(__dec_zone_page_state);
@@ -239,19 +302,9 @@ EXPORT_SYMBOL(inc_zone_page_state);
 void dec_zone_page_state(struct page *page, enum zone_stat_item item)
 {
        unsigned long flags;
-       struct zone *zone;
-       s8 *p;
 
-       zone = page_zone(page);
        local_irq_save(flags);
-       p = diff_pointer(zone, item);
-
-       (*p)--;
-
-       if (unlikely(*p < -STAT_THRESHOLD)) {
-               zone_page_state_add(*p, zone, item);
-               *p = 0;
-       }
+       __dec_zone_page_state(page, item);
        local_irq_restore(flags);
 }
 EXPORT_SYMBOL(dec_zone_page_state);
@@ -525,6 +578,10 @@ static int zoneinfo_show(struct seq_file *m, void *arg)
                                           pageset->pcp[j].high,
                                           pageset->pcp[j].batch);
                        }
+#ifdef CONFIG_SMP
+                       seq_printf(m, "\n  vm stats threshold: %d",
+                                       pageset->stat_threshold);
+#endif
                }
                seq_printf(m,
                           "\n  all_unreclaimable: %u"
@@ -613,3 +670,35 @@ struct seq_operations vmstat_op = {
 
 #endif /* CONFIG_PROC_FS */
 
+#ifdef CONFIG_SMP
+/*
+ * Use the cpu notifier to insure that the thresholds are recalculated
+ * when necessary.
+ */
+static int __cpuinit vmstat_cpuup_callback(struct notifier_block *nfb,
+               unsigned long action,
+               void *hcpu)
+{
+       switch (action) {
+               case CPU_UP_PREPARE:
+               case CPU_UP_CANCELED:
+               case CPU_DEAD:
+                       refresh_zone_stat_thresholds();
+                       break;
+               default:
+                       break;
+       }
+       return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata vmstat_notifier =
+       { &vmstat_cpuup_callback, NULL, 0 };
+
+int __init setup_vmstat(void)
+{
+       refresh_zone_stat_thresholds();
+       register_cpu_notifier(&vmstat_notifier);
+       return 0;
+}
+module_init(setup_vmstat)
+#endif
index 4c20f55..a2ede16 100644 (file)
@@ -440,6 +440,7 @@ int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff*))
        iph = skb->nh.iph;
 
        if (unlikely((iph->frag_off & htons(IP_DF)) && !skb->local_df)) {
+               IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
                icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
                          htonl(dst_mtu(&rt->u.dst)));
                kfree_skb(skb);
index 9d0ee7f..86dac10 100644 (file)
@@ -635,14 +635,17 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt,
        struct ipv6_txoptions *opt2;
        int err;
 
-       if (newtype != IPV6_HOPOPTS && opt->hopopt)
-               tot_len += CMSG_ALIGN(ipv6_optlen(opt->hopopt));
-       if (newtype != IPV6_RTHDRDSTOPTS && opt->dst0opt)
-               tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst0opt));
-       if (newtype != IPV6_RTHDR && opt->srcrt)
-               tot_len += CMSG_ALIGN(ipv6_optlen(opt->srcrt));
-       if (newtype != IPV6_DSTOPTS && opt->dst1opt)
-               tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst1opt));
+       if (opt) {
+               if (newtype != IPV6_HOPOPTS && opt->hopopt)
+                       tot_len += CMSG_ALIGN(ipv6_optlen(opt->hopopt));
+               if (newtype != IPV6_RTHDRDSTOPTS && opt->dst0opt)
+                       tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst0opt));
+               if (newtype != IPV6_RTHDR && opt->srcrt)
+                       tot_len += CMSG_ALIGN(ipv6_optlen(opt->srcrt));
+               if (newtype != IPV6_DSTOPTS && opt->dst1opt)
+                       tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst1opt));
+       }
+
        if (newopt && newoptlen)
                tot_len += CMSG_ALIGN(newoptlen);
 
@@ -659,25 +662,25 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt,
        opt2->tot_len = tot_len;
        p = (char *)(opt2 + 1);
 
-       err = ipv6_renew_option(opt->hopopt, newopt, newoptlen,
+       err = ipv6_renew_option(opt ? opt->hopopt : NULL, newopt, newoptlen,
                                newtype != IPV6_HOPOPTS,
                                &opt2->hopopt, &p);
        if (err)
                goto out;
 
-       err = ipv6_renew_option(opt->dst0opt, newopt, newoptlen,
+       err = ipv6_renew_option(opt ? opt->dst0opt : NULL, newopt, newoptlen,
                                newtype != IPV6_RTHDRDSTOPTS,
                                &opt2->dst0opt, &p);
        if (err)
                goto out;
 
-       err = ipv6_renew_option(opt->srcrt, newopt, newoptlen,
+       err = ipv6_renew_option(opt ? opt->srcrt : NULL, newopt, newoptlen,
                                newtype != IPV6_RTHDR,
-                               (struct ipv6_opt_hdr **)opt2->srcrt, &p);
+                               (struct ipv6_opt_hdr **)&opt2->srcrt, &p);
        if (err)
                goto out;
 
-       err = ipv6_renew_option(opt->dst1opt, newopt, newoptlen,
+       err = ipv6_renew_option(opt ? opt->dst1opt : NULL, newopt, newoptlen,
                                newtype != IPV6_DSTOPTS,
                                &opt2->dst1opt, &p);
        if (err)
index b4848ce..6d261bf 100644 (file)
@@ -1178,7 +1178,8 @@ static int __sock_create(int family, int type, int protocol, struct socket **res
  */
 
        if (!(sock = sock_alloc())) {
-               printk(KERN_WARNING "socket: no more sockets\n");
+               if (net_ratelimit())
+                       printk(KERN_WARNING "socket: no more sockets\n");
                err = -ENFILE;          /* Not exactly a match, but its the
                                           closest posix thing */
                goto out;
index b3bb683..b5ca35a 100755 (executable)
@@ -1,8 +1,8 @@
 #!/bin/sh
 
-for FILE in `grep '^#include <' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do
+for FILE in `grep '^[ \t]*#[ \t]*include[ \t]*<' $2 | cut -f2 -d\< | cut -f1 -d\> | egrep ^linux\|^asm` ; do
     if [ ! -r $1/$FILE ]; then
-       echo $2 requires $FILE, which does not exist
+       echo $2 requires $FILE, which does not exist in exported headers
        exit 1
     fi
 done
index 1b7c3df..97e38b6 100644 (file)
@@ -5,6 +5,20 @@
 #
 # Prompt user for primary drivers.
 
+config OSS_OBSOLETE_DRIVER
+       bool "Obsolete OSS drivers"
+       depends on SOUND_PRIME
+       help
+         This option enables support for obsolete OSS drivers that
+         are scheduled for removal in the near future since there
+         are ALSA drivers for the same hardware.
+
+         Please contact Adrian Bunk <bunk@stusta.de> if you had to
+         say Y here because your soundcard is not properly supported
+         by ALSA.
+
+         If unsure, say N.
+
 config SOUND_BT878
        tristate "BT878 audio dma"
        depends on SOUND_PRIME && PCI
@@ -23,7 +37,7 @@ config SOUND_BT878
 
 config SOUND_EMU10K1
        tristate "Creative SBLive! (EMU10K1)"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
        ---help---
          Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
          such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -49,7 +63,7 @@ config MIDI_EMU10K1
 
 config SOUND_FUSION
        tristate "Crystal SoundFusion (CS4280/461x)"
-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OSS_OBSOLETE_DRIVER
        help
          This module drives the Crystal SoundFusion devices (CS4280/46xx
          series) when wired as native sound drivers with AC97 codecs.  If
@@ -440,7 +454,7 @@ config SOUND_DMAP
 
 config SOUND_AD1816
        tristate "AD1816(A) based cards (EXPERIMENTAL)"
-       depends on EXPERIMENTAL && SOUND_OSS
+       depends on EXPERIMENTAL && SOUND_OSS && OSS_OBSOLETE_DRIVER
        help
          Say M here if you have a sound card based on the Analog Devices
          AD1816(A) chip.
@@ -450,21 +464,21 @@ config SOUND_AD1816
 
 config SOUND_AD1889
        tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
-       depends on EXPERIMENTAL && SOUND_OSS && PCI
+       depends on EXPERIMENTAL && SOUND_OSS && PCI && OSS_OBSOLETE_DRIVER
        help
          Say M here if you have a sound card based on the Analog Devices
          AD1889 chip.
 
 config SOUND_ADLIB
        tristate "Adlib Cards"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
        help
          Includes ASB 64 4D. Information on programming AdLib cards is
          available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
 
 config SOUND_ACI_MIXER
        tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
        ---help---
          ACI (Audio Command Interface) is a protocol used to communicate with
          the microcontroller on some sound cards produced by miro and
@@ -586,7 +600,7 @@ config SOUND_MPU401
 
 config SOUND_NM256
        tristate "NM256AV/NM256ZX audio support"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
        help
          Say M here to include audio support for the NeoMagic 256AV/256ZX
          chipsets. These are the audio chipsets found in the Sony
@@ -706,7 +720,7 @@ config SOUND_YM3812
 
 config SOUND_OPL3SA2
        tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
-       depends on SOUND_OSS
+       depends on SOUND_OSS && OSS_OBSOLETE_DRIVER
        help
          Say Y or M if you have a card based on one of these Yamaha sound
          chipsets or the "SAx", which is actually a SA3. Read
index 0abf280..51e83d7 100644 (file)
@@ -573,7 +573,7 @@ AC97_SINGLE("PC Speaker Playback Volume", AC97_PC_BEEP, 1, 15, 1)
 };
 
 static const struct snd_kcontrol_new snd_ac97_controls_mic_boost =
-       AC97_SINGLE("Mic Boost (+20dB) Switch", AC97_MIC, 6, 1, 0);
+       AC97_SINGLE("Mic Boost (+20dB)", AC97_MIC, 6, 1, 0);
 
 
 static const char* std_rec_sel[] = {"Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone"};
@@ -615,7 +615,7 @@ AC97_SINGLE("Simulated Stereo Enhancement", AC97_GENERAL_PURPOSE, 14, 1, 0),
 AC97_SINGLE("3D Control - Switch", AC97_GENERAL_PURPOSE, 13, 1, 0),
 AC97_SINGLE("Loudness (bass boost)", AC97_GENERAL_PURPOSE, 12, 1, 0),
 AC97_ENUM("Mono Output Select", std_enum[2]),
-AC97_ENUM("Mic Select Capture Switch", std_enum[3]),
+AC97_ENUM("Mic Select", std_enum[3]),
 AC97_SINGLE("ADC/DAC Loopback", AC97_GENERAL_PURPOSE, 7, 1, 0)
 };