powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft

Add a node for the i2c eeprom and delete the superflous gpio-example.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 8958347..30bfdc0 100644 (file)
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -258,34 +258,16 @@
                                compatible = "nxp,pcf8563";
                                reg = <0x51>;
                        };
-                       /* FIXME: EEPROM */
+                       eeprom@52 {
+                               compatible = "catalyst,24c32";
+                               reg = <0x52>;
+                       };
                };
 
                sram@8000 {
                        compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
                        reg = <0x8000 0x4000>;
                };
-
-               /* This is only an example device to show the usage of gpios. It maps all available
-                * gpios to the "gpio-provider" device.
-                */
-               gpio {
-                       compatible = "gpio-provider";
-
-                                                   /* mpc52xx          exp.con         patchfield */
-                       gpios = <&gpio_wkup     0 0 /* GPIO_WKUP_7      11d             jp13-3     */
-                                &gpio_wkup     1 0 /* GPIO_WKUP_6      14c                        */
-                                &gpio_wkup     6 0 /* PSC2_4           43c             x5-11      */
-                                &gpio_simple   2 0 /* IRDA_1           24c             x7-6    set GPS_PORT_CONFIG[IRDA] = 0 */
-                                &gpio_simple   3 0 /* IRDA_0                           x8-5    set GPS_PORT_CONFIG[IRDA] = 0 */
-                                &gpt2          0 0 /* timer2           12d             x4-4       */
-                                &gpt3          0 0 /* timer3           13d             x6-4       */
-                                &gpt4          0 0 /* timer4           61c             x2-16      */
-                                &gpt5          0 0 /* timer5           44c             x7-11      */
-                                &gpt6          0 0 /* timer6           60c             x8-15      */
-                                &gpt7          0 0 /* timer7           36a             x17-9      */
-                                >;
-               };
        };
 
        pci@f0000d00 {